Skip to content

L
linux
Commit 6a4d7a90 authored by Benjamin Herrenschmidt's avatar Benjamin Herrenschmidt
Browse files
Options

Merge commit 'gcl/next' into next

parents edbc29d7 bdad0548
Hide whitespace changes
Inline Side-by-side
Showing with 1476 additions and 545 deletions
arch/powerpc/boot/Makefile
View file @ 6a4d7a90
......@@ -235,7 +235,9 @@ image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \
dtbImage.adder875-redboot
# Board ports in arch/powerpc/platform/52xx/Kconfig
image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 cuImage.lite5200b
image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 lite5200.dtb
image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b lite5200b.dtb
image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 media5200.dtb
# Board ports in arch/powerpc/platform/82xx/Kconfig
image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads
......
arch/powerpc/boot/dts/cm5200.dts
View file @ 6a4d7a90
......@@ -17,6 +17,7 @@ / {
compatible = "schindler,cm5200";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
......@@ -66,7 +67,6 @@ timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x600 0x10>;
interrupts = <1 9 0>;
interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
};
......@@ -74,84 +74,76 @@ timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x610 0x10>;
interrupts = <1 10 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x620 0x10>;
interrupts = <1 11 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x630 0x10>;
interrupts = <1 12 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x640 0x10>;
interrupts = <1 13 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x650 0x10>;
interrupts = <1 14 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@660 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x660 0x10>;
interrupts = <1 15 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@670 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x670 0x10>;
interrupts = <1 16 0>;
interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
gpio@b00 {
gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
interrupt-parent = <&mpc5200_pic>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@c00 {
gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <&mpc5200_pic>;
gpio-controller;
#gpio-cells = <2>;
};
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
......@@ -161,7 +153,6 @@ dma-controller@1200 {
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
......@@ -170,48 +161,34 @@ xlb@1f00 {
};
serial@2000 { // PSC1
device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
interrupt-parent = <&mpc5200_pic>;
};
serial@2200 { // PSC2
device_type = "serial";
compatible = "fsl,mpc5200-psc-uart";
port-number = <1>; // Logical port assignment
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2200 0x100>;
interrupts = <2 2 0>;
interrupt-parent = <&mpc5200_pic>;
};
serial@2400 { // PSC3
device_type = "serial";
compatible = "fsl,mpc5200-psc-uart";
port-number = <2>; // Logical port assignment
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
interrupt-parent = <&mpc5200_pic>;
};
serial@2c00 { // PSC6
device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
port-number = <5>; // Logical port assignment
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
interrupt-parent = <&mpc5200_pic>;
};
ethernet@3000 {
device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
phy-handle = <&phy0>;
};
......@@ -221,10 +198,8 @@ mdio@3000 {
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
interrupt-parent = <&mpc5200_pic>;
phy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
......@@ -235,7 +210,6 @@ i2c@3d40 {
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
......@@ -245,9 +219,8 @@ sram@8000 {
};
};
lpb {
model = "fsl,lpb";
compatible = "fsl,lpb";
localbus {
compatible = "fsl,mpc5200b-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0xfc000000 0x2000000>;
......
arch/powerpc/boot/dts/digsy_mtc.dts 0 → 100644
View file @ 6a4d7a90
/*
* Digsy MTC board Device Tree Source
*
* Copyright (C) 2009 Semihalf
*
* Based on the CM5200 by M. Balakowicz
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "intercontrol,digsy-mtc";
compatible = "intercontrol,digsy-mtc";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,5200@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <0x4000>; // L1, 16K
i-cache-size = <0x4000>; // L1, 16K
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x02000000>; // 32MB
};
soc5200@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc5200b-immr";
ranges = <0 0xf0000000 0x0000c000>;
reg = <0xf0000000 0x00000100>;
bus-frequency = <0>; // from bootloader
system-frequency = <0>; // from bootloader
cdm@200 {
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
reg = <0x200 0x38>;
};
mpc5200_pic: interrupt-controller@500 {
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
reg = <0x500 0x80>;
};
timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x600 0x10>;
interrupts = <1 9 0>;
fsl,has-wdt;
};
timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x610 0x10>;
interrupts = <1 10 0>;
};
timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x620 0x10>;
interrupts = <1 11 0>;
};
timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x630 0x10>;
interrupts = <1 12 0>;
};
timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x640 0x10>;
interrupts = <1 13 0>;
};
timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x650 0x10>;
interrupts = <1 14 0>;
};
timer@660 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x660 0x10>;
interrupts = <1 15 0>;
};
timer@670 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x670 0x10>;
interrupts = <1 16 0>;
};
gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
gpio-controller;
#gpio-cells = <2>;
};
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
};
usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
};
dma-controller@1200 {
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
reg = <0x1200 0x80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
};
xlb@1f00 {
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
reg = <0x1f00 0x100>;
};
serial@2400 { // PSC3
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
};
serial@2600 { // PSC4
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2600 0x100>;
interrupts = <2 11 0>;
};
ethernet@3000 {
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
phy0: ethernet-phy@0 {
reg = <0>;
};
};
ata@3a00 {
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
};
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
fsl5200-clocking;
rtc@50 {
compatible = "at,24c08";
reg = <0x50>;
};
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
sram@8000 {
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
};
lpb {
compatible = "fsl,mpc5200b-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0xff000000 0x1000000>;
// 16-bit flash device at LocalPlus Bus CS0
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x1000000>;
bank-width = <2>;
device-width = <2>;
#size-cells = <1>;
#address-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x00200000>;
};
partition@200000 {
label = "root";
reg = <0x00200000 0x00300000>;
};
partition@500000 {
label = "user";
reg = <0x00500000 0x00a00000>;
};
partition@f00000 {
label = "u-boot";
reg = <0x00f00000 0x100000>;
};
};
};
};
arch/powerpc/boot/dts/lite5200.dts
View file @ 6a4d7a90
......@@ -17,6 +17,7 @@ / {
compatible = "fsl,lite5200";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
......@@ -58,96 +59,74 @@ mpc5200_pic: interrupt-controller@500 {
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
compatible = "fsl,mpc5200-pic";
reg = <0x500 0x80>;
};
timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <0>;
reg = <0x600 0x10>;
interrupts = <1 9 0>;
interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
};
timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <1>;
reg = <0x610 0x10>;
interrupts = <1 10 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <2>;
reg = <0x620 0x10>;
interrupts = <1 11 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <3>;
reg = <0x630 0x10>;
interrupts = <1 12 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <4>;
reg = <0x640 0x10>;
interrupts = <1 13 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <5>;
reg = <0x650 0x10>;
interrupts = <1 14 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@660 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <6>;
reg = <0x660 0x10>;
interrupts = <1 15 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@670 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
cell-index = <7>;
reg = <0x670 0x10>;
interrupts = <1 16 0>;
interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
compatible = "fsl,mpc5200-rtc";
reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
can@900 {
compatible = "fsl,mpc5200-mscan";
cell-index = <0>;
interrupts = <2 17 0>;
interrupt-parent = <&mpc5200_pic>;
reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200-mscan";
cell-index = <1>;
interrupts = <2 18 0>;
interrupt-parent = <&mpc5200_pic>;
reg = <0x980 0x80>;
};
......@@ -155,39 +134,33 @@ gpio@b00 {
compatible = "fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
gpio@c00 {
compatible = "fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <&mpc5200_pic>;
};
spi@f00 {
compatible = "fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
compatible = "fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
device_type = "dma-controller";
compatible = "fsl,mpc5200-bestcomm";
reg = <0x1200 0x80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
......@@ -196,13 +169,10 @@ xlb@1f00 {
};
serial@2000 { // PSC1
device_type = "serial";
compatible = "fsl,mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
cell-index = <0>;
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
interrupt-parent = <&mpc5200_pic>;
};
// PSC2 in ac97 mode example
......@@ -211,7 +181,6 @@ serial@2000 { // PSC1
// cell-index = <1>;
// reg = <0x2200 0x100>;
// interrupts = <2 2 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC3 in CODEC mode example
......@@ -220,27 +189,22 @@ serial@2000 { // PSC1
// cell-index = <2>;
// reg = <0x2400 0x100>;
// interrupts = <2 3 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC4 in uart mode example
//serial@2600 { // PSC4
// device_type = "serial";
// compatible = "fsl,mpc5200-psc-uart";
// cell-index = <3>;
// reg = <0x2600 0x100>;
// interrupts = <2 11 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC5 in uart mode example
//serial@2800 { // PSC5
// device_type = "serial";
// compatible = "fsl,mpc5200-psc-uart";
// cell-index = <4>;
// reg = <0x2800 0x100>;
// interrupts = <2 12 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC6 in spi mode example
......@@ -249,16 +213,13 @@ serial@2000 { // PSC1
// cell-index = <5>;
// reg = <0x2c00 0x100>;
// interrupts = <2 4 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
ethernet@3000 {
device_type = "network";
compatible = "fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
phy-handle = <&phy0>;
};
......@@ -268,30 +229,24 @@ mdio@3000 {
compatible = "fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
interrupt-parent = <&mpc5200_pic>;
phy0: ethernet-phy@1 {
device_type = "ethernet-phy";
reg = <1>;
};
};
ata@3a00 {
device_type = "ata";
compatible = "fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200-i2c","fsl-i2c";
cell-index = <0>;
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
......@@ -299,14 +254,12 @@ i2c@3d40 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200-i2c","fsl-i2c";
cell-index = <1>;
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
sram@8000 {
compatible = "fsl,mpc5200-sram","sram";
compatible = "fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
};
......@@ -325,7 +278,6 @@ pci@f0000d00 {
0xc000 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 10 0>;
interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
......
arch/powerpc/boot/dts/lite5200b.dts
View file @ 6a4d7a90
......@@ -17,6 +17,7 @@ / {
compatible = "fsl,lite5200b";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
......@@ -58,136 +59,112 @@ mpc5200_pic: interrupt-controller@500 {
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
reg = <0x500 0x80>;
};
timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
cell-index = <0>;
reg = <0x600 0x10>;
interrupts = <1 9 0>;
interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
};
timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
cell-index = <1>;
reg = <0x610 0x10>;
interrupts = <1 10 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
cell-index = <2>;
reg = <0x620 0x10>;
interrupts = <1 11 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
cell-index = <3>;
reg = <0x630 0x10>;
interrupts = <1 12 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
cell-index = <4>;
reg = <0x640 0x10>;
interrupts = <1 13 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
cell-index = <5>;
reg = <0x650 0x10>;
interrupts = <1 14 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@660 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
cell-index = <6>;
reg = <0x660 0x10>;
interrupts = <1 15 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@670 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
cell-index = <7>;
reg = <0x670 0x10>;
interrupts = <1 16 0>;
interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
can@900 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
cell-index = <0>;
interrupts = <2 17 0>;
interrupt-parent = <&mpc5200_pic>;
reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
cell-index = <1>;
interrupts = <2 18 0>;
interrupt-parent = <&mpc5200_pic>;
reg = <0x980 0x80>;
};
gpio@b00 {
gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
interrupt-parent = <&mpc5200_pic>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@c00 {
gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <&mpc5200_pic>;
gpio-controller;
#gpio-cells = <2>;
};
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
device_type = "dma-controller";
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
reg = <0x1200 0x80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
......@@ -196,13 +173,10 @@ xlb@1f00 {
};
serial@2000 { // PSC1
device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
cell-index = <0>;
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
interrupt-parent = <&mpc5200_pic>;
};
// PSC2 in ac97 mode example
......@@ -211,7 +185,6 @@ serial@2000 { // PSC1
// cell-index = <1>;
// reg = <0x2200 0x100>;
// interrupts = <2 2 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC3 in CODEC mode example
......@@ -220,27 +193,22 @@ serial@2000 { // PSC1
// cell-index = <2>;
// reg = <0x2400 0x100>;
// interrupts = <2 3 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC4 in uart mode example
//serial@2600 { // PSC4
// device_type = "serial";
// compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
// cell-index = <3>;
// reg = <0x2600 0x100>;
// interrupts = <2 11 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC5 in uart mode example
//serial@2800 { // PSC5
// device_type = "serial";
// compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
// cell-index = <4>;
// reg = <0x2800 0x100>;
// interrupts = <2 12 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
// PSC6 in spi mode example
......@@ -249,49 +217,40 @@ serial@2000 { // PSC1
// cell-index = <5>;
// reg = <0x2c00 0x100>;
// interrupts = <2 4 0>;
// interrupt-parent = <&mpc5200_pic>;
//};
ethernet@3000 {
device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
phy-handle = <&phy0>;
};
mdio@3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio";
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
interrupt-parent = <&mpc5200_pic>;
phy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
ata@3a00 {
device_type = "ata";
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
cell-index = <0>;
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
......@@ -299,14 +258,13 @@ i2c@3d40 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
cell-index = <1>;
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
sram@8000 {
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram";
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
};
......@@ -330,7 +288,6 @@ pci@f0000d00 {
0xc800 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 10 0>;
interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
......
arch/powerpc/boot/dts/media5200.dts 0 → 100644
View file @ 6a4d7a90
/*
* Freescale Media5200 board Device Tree Source
*
* Copyright 2009 Secret Lab Technologies Ltd.
* Grant Likely <grant.likely@secretlab.ca>
* Steven Cavanagh <scavanagh@secretlab.ca>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "fsl,media5200";
compatible = "fsl,media5200";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&mpc5200_pic>;
aliases {
console = &console;
ethernet0 = &eth0;
};
chosen {
linux,stdout-path = &console;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,5200@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <0x4000>; // L1, 16K
i-cache-size = <0x4000>; // L1, 16K
timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot
bus-frequency = <132000000>; // 132 MHz
clock-frequency = <396000000>; // 396 MHz
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x08000000>; // 128MB RAM
};
soc@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc5200b-immr";
ranges = <0 0xf0000000 0x0000c000>;
reg = <0xf0000000 0x00000100>;
bus-frequency = <132000000>;// 132 MHz
system-frequency = <0>; // from bootloader
cdm@200 {
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
reg = <0x200 0x38>;
};
mpc5200_pic: interrupt-controller@500 {
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
reg = <0x500 0x80>;
};
timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x600 0x10>;
interrupts = <1 9 0>;
fsl,has-wdt;
};
timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x610 0x10>;
interrupts = <1 10 0>;
};
timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x620 0x10>;
interrupts = <1 11 0>;
};
timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x630 0x10>;
interrupts = <1 12 0>;
};
timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x640 0x10>;
interrupts = <1 13 0>;
};
timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x650 0x10>;
interrupts = <1 14 0>;
};
timer@660 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x660 0x10>;
interrupts = <1 15 0>;
};
timer@670 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x670 0x10>;
interrupts = <1 16 0>;
};
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
};
can@900 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
interrupts = <2 17 0>;
reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
interrupts = <2 18 0>;
reg = <0x980 0x80>;
};
gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
gpio-controller;
#gpio-cells = <2>;
};
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
};
usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0x100>;
interrupts = <2 6 0>;
};
dma-controller@1200 {
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
reg = <0x1200 0x80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
};
xlb@1f00 {
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
reg = <0x1f00 0x100>;
};
// PSC6 in uart mode
console: serial@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <5>;
port-number = <0>; // Logical port assignment
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
};
eth0: ethernet@3000 {
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
phy0: ethernet-phy@0 {
reg = <0>;
};
};
ata@3a00 {
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
};
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
fsl5200-clocking;
};
i2c@3d40 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
fsl5200-clocking;
};
sram@8000 {
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
};
pci@f0000d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
reg = <0xf0000d00 0x100>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
0xc000 0 0 2 &media5200_fpga 0 3
0xc000 0 0 3 &media5200_fpga 0 4
0xc000 0 0 4 &media5200_fpga 0 5
0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot
0xc800 0 0 2 &media5200_fpga 0 4
0xc800 0 0 3 &media5200_fpga 0 5
0xc800 0 0 4 &media5200_fpga 0 2
0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI
0xd000 0 0 2 &media5200_fpga 0 5
0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 10 0>;
interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
localbus {
compatible = "fsl,mpc5200b-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = < 0 0 0xfc000000 0x02000000
1 0 0xfe000000 0x02000000
2 0 0xf0010000 0x00010000
3 0 0xf0020000 0x00010000 >;
flash@0,0 {
compatible = "amd,am29lv28ml", "cfi-flash";
reg = <0 0x0 0x2000000>; // 32 MB
bank-width = <4>; // Width in bytes of the flash bank
device-width = <2>; // Two devices on each bank
};
flash@1,0 {
compatible = "amd,am29lv28ml", "cfi-flash";
reg = <1 0 0x2000000>; // 32 MB
bank-width = <4>; // Width in bytes of the flash bank
device-width = <2>; // Two devices on each bank
};
media5200_fpga: fpga@2,0 {
compatible = "fsl,media5200-fpga";
interrupt-controller;
#interrupt-cells = <2>; // 0:bank 1:id; no type field
reg = <2 0 0x10000>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <0 0 3 // IRQ bank 0
1 1 3>; // IRQ bank 1
};
uart@3,0 {
compatible = "ti,tl16c752bpt";
reg = <3 0 0x10000>;
interrupt-parent = <&media5200_fpga>;
interrupts = <0 0 0 1>; // 2 irqs
};
};
};
arch/powerpc/boot/dts/motionpro.dts
View file @ 6a4d7a90
......@@ -17,6 +17,7 @@ / {
compatible = "promess,motionpro";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
......@@ -66,7 +67,6 @@ timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x600 0x10>;
interrupts = <1 9 0>;
interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
};
......@@ -74,35 +74,30 @@ timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x610 0x10>;
interrupts = <1 10 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x620 0x10>;
interrupts = <1 11 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x630 0x10>;
interrupts = <1 12 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x640 0x10>;
interrupts = <1 13 0>;
interrupt-parent = <&mpc5200_pic>;
};
timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x650 0x10>;
interrupts = <1 14 0>;
interrupt-parent = <&mpc5200_pic>;
};
motionpro-led@660 { // Motion-PRO status LED
......@@ -110,7 +105,6 @@ motionpro-led@660 { // Motion-PRO status LED
label = "motionpro-statusled";
reg = <0x660 0x10>;
interrupts = <1 15 0>;
interrupt-parent = <&mpc5200_pic>;
blink-delay = <100>; // 100 msec
};
......@@ -119,49 +113,46 @@ motionpro-led@670 { // Motion-PRO ready LED
label = "motionpro-readyled";
reg = <0x670 0x10>;
interrupts = <1 16 0>;
interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
can@980 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
interrupts = <2 18 0>;
interrupt-parent = <&mpc5200_pic>;
reg = <0x980 0x80>;
};
gpio@b00 {
gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
interrupt-parent = <&mpc5200_pic>;
gpio-controller;
#gpio-cells = <2>;
};
gpio@c00 {
gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <&mpc5200_pic>;
gpio-controller;
#gpio-cells = <2>;
};
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
......@@ -171,7 +162,6 @@ dma-controller@1200 {
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
......@@ -180,12 +170,9 @@ xlb@1f00 {
};
serial@2000 { // PSC1
device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
interrupt-parent = <&mpc5200_pic>;
};
// PSC2 in spi master mode
......@@ -194,26 +181,20 @@ spi@2200 { // PSC2
cell-index = <1>;
reg = <0x2200 0x100>;
interrupts = <2 2 0>;
interrupt-parent = <&mpc5200_pic>;
};
// PSC5 in uart mode
serial@2800 { // PSC5
device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
port-number = <4>; // Logical port assignment
reg = <0x2800 0x100>;
interrupts = <2 12 0>;
interrupt-parent = <&mpc5200_pic>;
};
ethernet@3000 {
device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
phy-handle = <&phy0>;
};
......@@ -223,10 +204,8 @@ mdio@3000 {
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
interrupt-parent = <&mpc5200_pic>;
phy0: ethernet-phy@2 {
device_type = "ethernet-phy";
reg = <2>;
};
};
......@@ -235,7 +214,6 @@ ata@3a00 {
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
i2c@3d40 {
......@@ -244,7 +222,6 @@ i2c@3d40 {
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
rtc@68 {
......@@ -259,8 +236,8 @@ sram@8000 {
};
};
lpb {
compatible = "fsl,lpb";
localbus {
compatible = "fsl,mpc5200b-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0xff000000 0x01000000
......@@ -273,7 +250,6 @@ kollmorgen@1,0 {
compatible = "promess,motionpro-kollmorgen";
reg = <1 0 0x10000>;
interrupts = <1 1 0>;
interrupt-parent = <&mpc5200_pic>;
};
// 8-bit board CPLD on LocalPlus Bus CS2
......
arch/powerpc/boot/dts/pcm030.dts
View file @ 6a4d7a90
......@@ -19,6 +19,7 @@ / {
compatible = "phytec,pcm030";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
......@@ -29,26 +30,26 @@ PowerPC,5200@0 {
reg = <0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <0x4000>; /* L1, 16K */
i-cache-size = <0x4000>; /* L1, 16K */
timebase-frequency = <0>; /* From Bootloader */
bus-frequency = <0>; /* From Bootloader */
clock-frequency = <0>; /* From Bootloader */
d-cache-size = <0x4000>; // L1, 16K
i-cache-size = <0x4000>; // L1, 16K
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x04000000>; /* 64MB */
reg = <0x00000000 0x04000000>; // 64MB
};
soc5200@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc5200b-immr";
ranges = <0x0 0xf0000000 0x0000c000>;
bus-frequency = <0>; /* From bootloader */
system-frequency = <0>; /* From bootloader */
ranges = <0 0xf0000000 0x0000c000>;
bus-frequency = <0>; // from bootloader
system-frequency = <0>; // from bootloader
cdm@200 {
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
......@@ -56,87 +57,70 @@ cdm@200 {
};
mpc5200_pic: interrupt-controller@500 {
/* 5200 interrupts are encoded into two levels; */
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
reg = <0x500 0x80>;
};
timer@600 { /* General Purpose Timer */
timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
cell-index = <0>;
reg = <0x600 0x10>;
interrupts = <0x1 0x9 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <1 9 0>;
fsl,has-wdt;
};
timer@610 { /* General Purpose Timer */
timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
cell-index = <1>;
reg = <0x610 0x10>;
interrupts = <0x1 0xa 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <1 10 0>;
};
gpt2: timer@620 { /* General Purpose Timer in GPIO mode */
gpt2: timer@620 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
cell-index = <2>;
reg = <0x620 0x10>;
interrupts = <0x1 0xb 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <1 11 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
gpt3: timer@630 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
cell-index = <3>;
reg = <0x630 0x10>;
interrupts = <0x1 0xc 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <1 12 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
gpt4: timer@640 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
cell-index = <4>;
reg = <0x640 0x10>;
interrupts = <0x1 0xd 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <1 13 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
gpt5: timer@650 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
cell-index = <5>;
reg = <0x650 0x10>;
interrupts = <0x1 0xe 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <1 14 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt6: timer@660 { /* General Purpose Timer in GPIO mode */
gpt6: timer@660 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
cell-index = <6>;
reg = <0x660 0x10>;
interrupts = <0x1 0xf 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <1 15 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt7: timer@670 { /* General Purpose Timer in GPIO mode */
gpt7: timer@670 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
cell-index = <7>;
reg = <0x670 0x10>;
interrupts = <0x1 0x10 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <1 16 0>;
gpio-controller;
#gpio-cells = <2>;
};
......@@ -144,40 +128,33 @@ gpt7: timer@670 { /* General Purpose Timer in GPIO mode */
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
reg = <0x800 0x100>;
interrupts = <0x1 0x5 0x0 0x1 0x6 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <1 5 0 1 6 0>;
};
can@900 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
cell-index = <0>;
interrupts = <0x2 0x11 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <2 17 0>;
reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
cell-index = <1>;
interrupts = <0x2 0x12 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <2 18 0>;
reg = <0x980 0x80>;
};
gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <0x1 0x7 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <1 7 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpio_wkup: gpio-wkup@c00 {
gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <0x1 0x8 0x0 0x0 0x3 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <1 8 0 0 3 0>;
gpio-controller;
#gpio-cells = <2>;
};
......@@ -185,26 +162,22 @@ gpio_wkup: gpio-wkup@c00 {
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <0x2 0xd 0x0 0x2 0xe 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <2 13 0 2 14 0>;
};
usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <0x2 0x6 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <2 6 0>;
};
dma-controller@1200 {
device_type = "dma-controller";
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
reg = <0x1200 0x80>;
interrupts = <0x3 0x0 0x0 0x3 0x1 0x0 0x3 0x2 0x0 0x3 0x3 0x0
0x3 0x4 0x0 0x3 0x5 0x0 0x3 0x6 0x0 0x3 0x7 0x0
0x3 0x8 0x0 0x3 0x9 0x0 0x3 0xa 0x0 0x3 0xb 0x0
0x3 0xc 0x0 0x3 0xd 0x0 0x3 0xe 0x0 0x3 0xf 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
};
xlb@1f00 {
......@@ -213,24 +186,19 @@ xlb@1f00 {
};
ac97@2000 { /* PSC1 in ac97 mode */
device_type = "sound";
compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
cell-index = <0>;
reg = <0x2000 0x100>;
interrupts = <0x2 0x2 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <2 1 0>;
};
/* PSC2 port is used by CAN1/2 */
serial@2400 { /* PSC3 in UART mode */
device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
port-number = <0>;
cell-index = <2>;
reg = <0x2400 0x100>;
interrupts = <0x2 0x3 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <2 3 0>;
};
/* PSC4 is ??? */
......@@ -238,55 +206,44 @@ serial@2400 { /* PSC3 in UART mode */
/* PSC5 is ??? */
serial@2c00 { /* PSC6 in UART mode */
device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
port-number = <1>;
cell-index = <5>;
reg = <0x2c00 0x100>;
interrupts = <0x2 0x4 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <2 4 0>;
};
ethernet@3000 {
device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [00 00 00 00 00 00];
interrupts = <0x2 0x5 0x0>;
interrupt-parent = <&mpc5200_pic>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio";
reg = <0x3000 0x400>; /* fec range, since we need to setup fec interrupts */
interrupts = <0x2 0x5 0x0>; /* these are for "mii command finished", not link changes & co. */
interrupt-parent = <&mpc5200_pic>;
phy0:ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0x0>;
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
phy0: ethernet-phy@0 {
reg = <0>;
};
};
ata@3a00 {
device_type = "ata";
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <0x2 0x7 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <2 7 0>;
};
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
cell-index = <0>;
reg = <0x3d00 0x40>;
interrupts = <0x2 0xf 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <2 15 0>;
fsl5200-clocking;
};
......@@ -294,10 +251,8 @@ i2c@3d40 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
cell-index = <1>;
reg = <0x3d40 0x40>;
interrupts = <0x2 0x10 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <2 16 0>;
fsl5200-clocking;
rtc@51 {
compatible = "nxp,pcf8563";
......@@ -307,7 +262,7 @@ rtc@51 {
};
sram@8000 {
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram";
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
......@@ -340,22 +295,21 @@ pci@f0000d00 {
device_type = "pci";
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
reg = <0xf0000d00 0x100>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 /* 1st slot */
0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3
0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3
0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3
0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 /* 2nd slot */
0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3
0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3
0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
0xc000 0 0 2 &mpc5200_pic 1 1 3
0xc000 0 0 3 &mpc5200_pic 1 2 3
0xc000 0 0 4 &mpc5200_pic 1 3 3
0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
0xc800 0 0 2 &mpc5200_pic 1 2 3
0xc800 0 0 3 &mpc5200_pic 1 3 3
0xc800 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <2 8 0 2 9 0 2 10 0>;
bus-range = <0 0>;
ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
};
arch/powerpc/boot/dts/tqm5200.dts
View file @ 6a4d7a90
......@@ -17,6 +17,7 @@ / {
compatible = "tqc,tqm5200";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
......@@ -66,36 +67,33 @@ timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
reg = <0x600 0x10>;
interrupts = <1 9 0>;
interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
};
can@900 {
compatible = "fsl,mpc5200-mscan";
interrupts = <2 17 0>;
interrupt-parent = <&mpc5200_pic>;
reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200-mscan";
interrupts = <2 18 0>;
interrupt-parent = <&mpc5200_pic>;
reg = <0x980 0x80>;
};
gpio@b00 {
gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
interrupt-parent = <&mpc5200_pic>;
gpio-controller;
#gpio-cells = <2>;
};
usb@1000 {
compatible = "fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
......@@ -105,7 +103,6 @@ dma-controller@1200 {
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
......@@ -114,39 +111,28 @@ xlb@1f00 {
};
serial@2000 { // PSC1
device_type = "serial";
compatible = "fsl,mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
interrupt-parent = <&mpc5200_pic>;
};
serial@2200 { // PSC2
device_type = "serial";
compatible = "fsl,mpc5200-psc-uart";
port-number = <1>; // Logical port assignment
reg = <0x2200 0x100>;
interrupts = <2 2 0>;
interrupt-parent = <&mpc5200_pic>;
};
serial@2400 { // PSC3
device_type = "serial";
compatible = "fsl,mpc5200-psc-uart";
port-number = <2>; // Logical port assignment
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
interrupt-parent = <&mpc5200_pic>;
};
ethernet@3000 {
device_type = "network";
compatible = "fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
phy-handle = <&phy0>;
};
......@@ -156,10 +142,8 @@ mdio@3000 {
compatible = "fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
interrupt-parent = <&mpc5200_pic>;
phy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
......@@ -168,7 +152,6 @@ ata@3a00 {
compatible = "fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
i2c@3d40 {
......@@ -177,7 +160,6 @@ i2c@3d40 {
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
rtc@68 {
......@@ -192,9 +174,8 @@ sram@8000 {
};
};
lpb {
model = "fsl,lpb";
compatible = "fsl,lpb";
localbus {
compatible = "fsl,mpc5200-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0xfc000000 0x02000000>;
......@@ -223,7 +204,6 @@ pci@f0000d00 {
0xc000 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 10 0>;
interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
0x02000000 0 0x90000000 0x90000000 0 0x10000000
......
arch/powerpc/platforms/52xx/Kconfig
View file @ 6a4d7a90
......@@ -21,7 +21,12 @@ config PPC_MPC5200_SIMPLE
and if there is a PCI bus node defined in the device tree.
Boards that are compatible with this generic platform support
are: 'tqc,tqm5200', 'promess,motionpro', 'schindler,cm5200'.
are:
intercontrol,digsy-mtc
phytec,pcm030
promess,motionpro
schindler,cm5200
tqc,tqm5200
config PPC_EFIKA
bool "bPlan Efika 5k2. MPC5200B based computer"
......@@ -35,6 +40,11 @@ config PPC_LITE5200
depends on PPC_MPC52xx
select DEFAULT_UIMAGE
config PPC_MEDIA5200
bool "Freescale Media5200 Eval Board"
depends on PPC_MPC52xx
select DEFAULT_UIMAGE
config PPC_MPC5200_BUGFIX
bool "MPC5200 (L25R) bugfix support"
depends on PPC_MPC52xx
......
arch/powerpc/platforms/52xx/Makefile
View file @ 6a4d7a90
#
# Makefile for 52xx based boards
#
obj-y += mpc52xx_pic.o mpc52xx_common.o
obj-y += mpc52xx_pic.o mpc52xx_common.o mpc52xx_gpt.o
obj-$(CONFIG_PCI) += mpc52xx_pci.o
obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o
obj-$(CONFIG_PPC_EFIKA) += efika.o
obj-$(CONFIG_PPC_LITE5200) += lite5200.o
obj-$(CONFIG_PPC_MEDIA5200) += media5200.o
obj-$(CONFIG_PM) += mpc52xx_sleep.o mpc52xx_pm.o
ifeq ($(CONFIG_PPC_LITE5200),y)
......
arch/powerpc/platforms/52xx/media5200.c 0 → 100644
View file @ 6a4d7a90
/*
* Support for 'media5200-platform' compatible boards.
*
* Copyright (C) 2008 Secret Lab Technologies Ltd.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Description:
* This code implements support for the Freescape Media5200 platform
* (built around the MPC5200 SoC).
*
* Notable characteristic of the Media5200 is the presence of an FPGA
* that has all external IRQ lines routed through it. This file implements
* a cascaded interrupt controller driver which attaches itself to the
* Virtual IRQ subsystem after the primary mpc5200 interrupt controller
* is initialized.
*
*/
#undef DEBUG
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <asm/time.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/mpc52xx.h>
static struct of_device_id mpc5200_gpio_ids[] __initdata = {
{ .compatible = "fsl,mpc5200-gpio", },
{ .compatible = "mpc5200-gpio", },
{}
};
/* FPGA register set */
#define MEDIA5200_IRQ_ENABLE (0x40c)
#define MEDIA5200_IRQ_STATUS (0x410)
#define MEDIA5200_NUM_IRQS (6)
#define MEDIA5200_IRQ_SHIFT (32 - MEDIA5200_NUM_IRQS)
struct media5200_irq {
void __iomem *regs;
spinlock_t lock;
struct irq_host *irqhost;
};
struct media5200_irq media5200_irq;
static void media5200_irq_unmask(unsigned int virq)
{
unsigned long flags;
u32 val;
spin_lock_irqsave(&media5200_irq.lock, flags);
val = in_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE);
val |= 1 << (MEDIA5200_IRQ_SHIFT + irq_map[virq].hwirq);
out_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE, val);
spin_unlock_irqrestore(&media5200_irq.lock, flags);
}
static void media5200_irq_mask(unsigned int virq)
{
unsigned long flags;
u32 val;
spin_lock_irqsave(&media5200_irq.lock, flags);
val = in_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE);
val &= ~(1 << (MEDIA5200_IRQ_SHIFT + irq_map[virq].hwirq));
out_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE, val);
spin_unlock_irqrestore(&media5200_irq.lock, flags);
}
static struct irq_chip media5200_irq_chip = {
.typename = "Media5200 FPGA",
.unmask = media5200_irq_unmask,
.mask = media5200_irq_mask,
.mask_ack = media5200_irq_mask,
};
void media5200_irq_cascade(unsigned int virq, struct irq_desc *desc)
{
int sub_virq, val;
u32 status, enable;
/* Mask off the cascaded IRQ */
spin_lock(&desc->lock);
desc->chip->mask(virq);
spin_unlock(&desc->lock);
/* Ask the FPGA for IRQ status. If 'val' is 0, then no irqs
* are pending. 'ffs()' is 1 based */
status = in_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE);
enable = in_be32(media5200_irq.regs + MEDIA5200_IRQ_STATUS);
val = ffs((status & enable) >> MEDIA5200_IRQ_SHIFT);
if (val) {
sub_virq = irq_linear_revmap(media5200_irq.irqhost, val - 1);
/* pr_debug("%s: virq=%i s=%.8x e=%.8x hwirq=%i subvirq=%i\n",
* __func__, virq, status, enable, val - 1, sub_virq);
*/
generic_handle_irq(sub_virq);
}
/* Processing done; can reenable the cascade now */
spin_lock(&desc->lock);
desc->chip->ack(virq);
if (!(desc->status & IRQ_DISABLED))
desc->chip->unmask(virq);
spin_unlock(&desc->lock);
}
static int media5200_irq_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
struct irq_desc *desc = get_irq_desc(virq);
pr_debug("%s: h=%p, virq=%i, hwirq=%i\n", __func__, h, virq, (int)hw);
set_irq_chip_data(virq, &media5200_irq);
set_irq_chip_and_handler(virq, &media5200_irq_chip, handle_level_irq);
set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
desc->status |= IRQ_TYPE_LEVEL_LOW | IRQ_LEVEL;
return 0;
}
static int media5200_irq_xlate(struct irq_host *h, struct device_node *ct,
u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
{
if (intsize != 2)
return -1;
pr_debug("%s: bank=%i, number=%i\n", __func__, intspec[0], intspec[1]);
*out_hwirq = intspec[1];
*out_flags = IRQ_TYPE_NONE;
return 0;
}
static struct irq_host_ops media5200_irq_ops = {
.map = media5200_irq_map,
.xlate = media5200_irq_xlate,
};
/*
* Setup Media5200 IRQ mapping
*/
static void __init media5200_init_irq(void)
{
struct device_node *fpga_np;
int cascade_virq;
/* First setup the regular MPC5200 interrupt controller */
mpc52xx_init_irq();
/* Now find the FPGA IRQ */
fpga_np = of_find_compatible_node(NULL, NULL, "fsl,media5200-fpga");
if (!fpga_np)
goto out;
pr_debug("%s: found fpga node: %s\n", __func__, fpga_np->full_name);
media5200_irq.regs = of_iomap(fpga_np, 0);
if (!media5200_irq.regs)
goto out;
pr_debug("%s: mapped to %p\n", __func__, media5200_irq.regs);
cascade_virq = irq_of_parse_and_map(fpga_np, 0);
if (!cascade_virq)
goto out;
pr_debug("%s: cascaded on virq=%i\n", __func__, cascade_virq);
/* Disable all FPGA IRQs */
out_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE, 0);
spin_lock_init(&media5200_irq.lock);
media5200_irq.irqhost = irq_alloc_host(fpga_np, IRQ_HOST_MAP_LINEAR,
MEDIA5200_NUM_IRQS,
&media5200_irq_ops, -1);
if (!media5200_irq.irqhost)
goto out;
pr_debug("%s: allocated irqhost\n", __func__);
media5200_irq.irqhost->host_data = &media5200_irq;
set_irq_data(cascade_virq, &media5200_irq);
set_irq_chained_handler(cascade_virq, media5200_irq_cascade);
return;
out:
pr_err("Could not find Media5200 FPGA; PCI interrupts will not work\n");
}
/*
* Setup the architecture
*/
static void __init media5200_setup_arch(void)
{
struct device_node *np;
struct mpc52xx_gpio __iomem *gpio;
u32 port_config;
if (ppc_md.progress)
ppc_md.progress("media5200_setup_arch()", 0);
/* Map important registers from the internal memory map */
mpc52xx_map_common_devices();
/* Some mpc5200 & mpc5200b related configuration */
mpc5200_setup_xlb_arbiter();
mpc52xx_setup_pci();
np = of_find_matching_node(NULL, mpc5200_gpio_ids);
gpio = of_iomap(np, 0);
of_node_put(np);
if (!gpio) {
printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
__func__);
return;
}
/* Set port config */
port_config = in_be32(&gpio->port_config);
port_config &= ~0x03000000; /* ATA CS is on csb_4/5 */
port_config |= 0x01000000;
out_be32(&gpio->port_config, port_config);
/* Unmap zone */
iounmap(gpio);
}
/* list of the supported boards */
static char *board[] __initdata = {
"fsl,media5200",
NULL
};
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init media5200_probe(void)
{
unsigned long node = of_get_flat_dt_root();
int i = 0;
while (board[i]) {
if (of_flat_dt_is_compatible(node, board[i]))
break;
i++;
}
return (board[i] != NULL);
}
define_machine(media5200_platform) {
.name = "media5200-platform",
.probe = media5200_probe,
.setup_arch = media5200_setup_arch,
.init = mpc52xx_declare_of_platform_devices,
.init_IRQ = media5200_init_irq,
.get_irq = mpc52xx_get_irq,
.restart = mpc52xx_restart,
.calibrate_decr = generic_calibrate_decr,
};
arch/powerpc/platforms/52xx/mpc5200_simple.c
View file @ 6a4d7a90
......@@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
/* list of the supported boards */
static char *board[] __initdata = {
"intercontrol,digsy-mtc",
"promess,motionpro",
"phytec,pcm030",
"schindler,cm5200",
......
arch/powerpc/platforms/52xx/mpc52xx_gpio.c
View file @ 6a4d7a90
......@@ -354,88 +354,6 @@ static struct of_platform_driver mpc52xx_simple_gpiochip_driver = {
.remove = mpc52xx_gpiochip_remove,
};
/*
* GPIO LIB API implementation for gpt GPIOs.
*
* Each gpt only has a single GPIO.
*/
static int mpc52xx_gpt_gpio_get(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
return (in_be32(&regs->status) & (1 << (31 - 23))) ? 1 : 0;
}
static void
mpc52xx_gpt_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
if (val)
out_be32(&regs->mode, 0x34);
else
out_be32(&regs->mode, 0x24);
pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
}
static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
out_be32(&regs->mode, 0x04);
return 0;
}
static int
mpc52xx_gpt_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
mpc52xx_gpt_gpio_set(gc, gpio, val);
pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
return 0;
}
static int __devinit mpc52xx_gpt_gpiochip_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
struct of_mm_gpio_chip *mmchip;
struct of_gpio_chip *chip;
mmchip = kzalloc(sizeof(*mmchip), GFP_KERNEL);
if (!mmchip)
return -ENOMEM;
chip = &mmchip->of_gc;
chip->gpio_cells = 2;
chip->gc.ngpio = 1;
chip->gc.direction_input = mpc52xx_gpt_gpio_dir_in;
chip->gc.direction_output = mpc52xx_gpt_gpio_dir_out;
chip->gc.get = mpc52xx_gpt_gpio_get;
chip->gc.set = mpc52xx_gpt_gpio_set;
return of_mm_gpiochip_add(ofdev->node, mmchip);
}
static const struct of_device_id mpc52xx_gpt_gpiochip_match[] = {
{
.compatible = "fsl,mpc5200-gpt-gpio",
},
{}
};
static struct of_platform_driver mpc52xx_gpt_gpiochip_driver = {
.name = "gpio_gpt",
.match_table = mpc52xx_gpt_gpiochip_match,
.probe = mpc52xx_gpt_gpiochip_probe,
.remove = mpc52xx_gpiochip_remove,
};
static int __init mpc52xx_gpio_init(void)
{
if (of_register_platform_driver(&mpc52xx_wkup_gpiochip_driver))
......@@ -444,9 +362,6 @@ static int __init mpc52xx_gpio_init(void)
if (of_register_platform_driver(&mpc52xx_simple_gpiochip_driver))
printk(KERN_ERR "Unable to register simple GPIO driver\n");
if (of_register_platform_driver(&mpc52xx_gpt_gpiochip_driver))
printk(KERN_ERR "Unable to register gpt GPIO driver\n");
return 0;
}
......
arch/powerpc/platforms/52xx/mpc52xx_gpt.c 0 → 100644
View file @ 6a4d7a90
/*
* MPC5200 General Purpose Timer device driver
*
* Copyright (c) 2009 Secret Lab Technologies Ltd.
* Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This file is a driver for the the General Purpose Timer (gpt) devices
* found on the MPC5200 SoC. Each timer has an IO pin which can be used
* for GPIO or can be used to raise interrupts. The timer function can
* be used independently from the IO pin, or it can be used to control
* output signals or measure input signals.
*
* This driver supports the GPIO and IRQ controller functions of the GPT
* device. Timer functions are not yet supported, nor is the watchdog
* timer.
*
* To use the GPIO function, the following two properties must be added
* to the device tree node for the gpt device (typically in the .dts file
* for the board):
* gpio-controller;
* #gpio-cells = < 2 >;
* This driver will register the GPIO pin if it finds the gpio-controller
* property in the device tree.
*
* To use the IRQ controller function, the following two properties must
* be added to the device tree node for the gpt device:
* interrupt-controller;
* #interrupt-cells = < 1 >;
* The IRQ controller binding only uses one cell to specify the interrupt,
* and the IRQ flags are encoded in the cell. A cell is not used to encode
* the IRQ number because the GPT only has a single IRQ source. For flags,
* a value of '1' means rising edge sensitive and '2' means falling edge.
*
* The GPIO and the IRQ controller functions can be used at the same time,
* but in this use case the IO line will only work as an input. Trying to
* use it as a GPIO output will not work.
*
* When using the GPIO line as an output, it can either be driven as normal
* IO, or it can be an Open Collector (OC) output. At the moment it is the
* responsibility of either the bootloader or the platform setup code to set
* the output mode. This driver does not change the output mode setting.
*/
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/kernel.h>
#include <asm/mpc52xx.h>
MODULE_DESCRIPTION("Freescale MPC52xx gpt driver");
MODULE_AUTHOR("Sascha Hauer, Grant Likely");
MODULE_LICENSE("GPL");
/**
* struct mpc52xx_gpt - Private data structure for MPC52xx GPT driver
* @dev: pointer to device structure
* @regs: virtual address of GPT registers
* @lock: spinlock to coordinate between different functions.
* @of_gc: of_gpio_chip instance structure; used when GPIO is enabled
* @irqhost: Pointer to irq_host instance; used when IRQ mode is supported
*/
struct mpc52xx_gpt_priv {
struct device *dev;
struct mpc52xx_gpt __iomem *regs;
spinlock_t lock;
struct irq_host *irqhost;
#if defined(CONFIG_GPIOLIB)
struct of_gpio_chip of_gc;
#endif
};
#define MPC52xx_GPT_MODE_MS_MASK (0x07)
#define MPC52xx_GPT_MODE_MS_IC (0x01)
#define MPC52xx_GPT_MODE_MS_OC (0x02)
#define MPC52xx_GPT_MODE_MS_PWM (0x03)
#define MPC52xx_GPT_MODE_MS_GPIO (0x04)
#define MPC52xx_GPT_MODE_GPIO_MASK (0x30)
#define MPC52xx_GPT_MODE_GPIO_OUT_LOW (0x20)
#define MPC52xx_GPT_MODE_GPIO_OUT_HIGH (0x30)
#define MPC52xx_GPT_MODE_IRQ_EN (0x0100)
#define MPC52xx_GPT_MODE_ICT_MASK (0x030000)
#define MPC52xx_GPT_MODE_ICT_RISING (0x010000)
#define MPC52xx_GPT_MODE_ICT_FALLING (0x020000)
#define MPC52xx_GPT_MODE_ICT_TOGGLE (0x030000)
#define MPC52xx_GPT_STATUS_IRQMASK (0x000f)
/* ---------------------------------------------------------------------
* Cascaded interrupt controller hooks
*/
static void mpc52xx_gpt_irq_unmask(unsigned int virq)
{
struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq);
unsigned long flags;
spin_lock_irqsave(&gpt->lock, flags);
setbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_IRQ_EN);
spin_unlock_irqrestore(&gpt->lock, flags);
}
static void mpc52xx_gpt_irq_mask(unsigned int virq)
{
struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq);
unsigned long flags;
spin_lock_irqsave(&gpt->lock, flags);
clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_IRQ_EN);
spin_unlock_irqrestore(&gpt->lock, flags);
}
static void mpc52xx_gpt_irq_ack(unsigned int virq)
{
struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq);
out_be32(&gpt->regs->status, MPC52xx_GPT_STATUS_IRQMASK);
}
static int mpc52xx_gpt_irq_set_type(unsigned int virq, unsigned int flow_type)
{
struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq);
unsigned long flags;
u32 reg;
dev_dbg(gpt->dev, "%s: virq=%i type=%x\n", __func__, virq, flow_type);
spin_lock_irqsave(&gpt->lock, flags);
reg = in_be32(&gpt->regs->mode) & ~MPC52xx_GPT_MODE_ICT_MASK;
if (flow_type & IRQF_TRIGGER_RISING)
reg |= MPC52xx_GPT_MODE_ICT_RISING;
if (flow_type & IRQF_TRIGGER_FALLING)
reg |= MPC52xx_GPT_MODE_ICT_FALLING;
out_be32(&gpt->regs->mode, reg);
spin_unlock_irqrestore(&gpt->lock, flags);
return 0;
}
static struct irq_chip mpc52xx_gpt_irq_chip = {
.typename = "MPC52xx GPT",
.unmask = mpc52xx_gpt_irq_unmask,
.mask = mpc52xx_gpt_irq_mask,
.ack = mpc52xx_gpt_irq_ack,
.set_type = mpc52xx_gpt_irq_set_type,
};
void mpc52xx_gpt_irq_cascade(unsigned int virq, struct irq_desc *desc)
{
struct mpc52xx_gpt_priv *gpt = get_irq_data(virq);
int sub_virq;
u32 status;
status = in_be32(&gpt->regs->status) & MPC52xx_GPT_STATUS_IRQMASK;
if (status) {
sub_virq = irq_linear_revmap(gpt->irqhost, 0);
generic_handle_irq(sub_virq);
}
}
static int mpc52xx_gpt_irq_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
struct mpc52xx_gpt_priv *gpt = h->host_data;
dev_dbg(gpt->dev, "%s: h=%p, virq=%i\n", __func__, h, virq);
set_irq_chip_data(virq, gpt);
set_irq_chip_and_handler(virq, &mpc52xx_gpt_irq_chip, handle_edge_irq);
return 0;
}
static int mpc52xx_gpt_irq_xlate(struct irq_host *h, struct device_node *ct,
u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
{
struct mpc52xx_gpt_priv *gpt = h->host_data;
dev_dbg(gpt->dev, "%s: flags=%i\n", __func__, intspec[0]);
if ((intsize < 1) || (intspec[0] < 1) || (intspec[0] > 3)) {
dev_err(gpt->dev, "bad irq specifier in %s\n", ct->full_name);
return -EINVAL;
}
*out_hwirq = 0; /* The GPT only has 1 IRQ line */
*out_flags = intspec[0];
return 0;
}
static struct irq_host_ops mpc52xx_gpt_irq_ops = {
.map = mpc52xx_gpt_irq_map,
.xlate = mpc52xx_gpt_irq_xlate,
};
static void
mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
{
int cascade_virq;
unsigned long flags;
/* Only setup cascaded IRQ if device tree claims the GPT is
* an interrupt controller */
if (!of_find_property(node, "interrupt-controller", NULL))
return;
cascade_virq = irq_of_parse_and_map(node, 0);
gpt->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, 1,
&mpc52xx_gpt_irq_ops, -1);
if (!gpt->irqhost) {
dev_err(gpt->dev, "irq_alloc_host() failed\n");
return;
}
gpt->irqhost->host_data = gpt;
set_irq_data(cascade_virq, gpt);
set_irq_chained_handler(cascade_virq, mpc52xx_gpt_irq_cascade);
/* Set to Input Capture mode */
spin_lock_irqsave(&gpt->lock, flags);
clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK,
MPC52xx_GPT_MODE_MS_IC);
spin_unlock_irqrestore(&gpt->lock, flags);
dev_dbg(gpt->dev, "%s() complete. virq=%i\n", __func__, cascade_virq);
}
/* ---------------------------------------------------------------------
* GPIOLIB hooks
*/
#if defined(CONFIG_GPIOLIB)
static inline struct mpc52xx_gpt_priv *gc_to_mpc52xx_gpt(struct gpio_chip *gc)
{
return container_of(to_of_gpio_chip(gc), struct mpc52xx_gpt_priv,of_gc);
}
static int mpc52xx_gpt_gpio_get(struct gpio_chip *gc, unsigned int gpio)
{
struct mpc52xx_gpt_priv *gpt = gc_to_mpc52xx_gpt(gc);
return (in_be32(&gpt->regs->status) >> 8) & 1;
}
static void
mpc52xx_gpt_gpio_set(struct gpio_chip *gc, unsigned int gpio, int v)
{
struct mpc52xx_gpt_priv *gpt = gc_to_mpc52xx_gpt(gc);
unsigned long flags;
u32 r;
dev_dbg(gpt->dev, "%s: gpio:%d v:%d\n", __func__, gpio, v);
r = v ? MPC52xx_GPT_MODE_GPIO_OUT_HIGH : MPC52xx_GPT_MODE_GPIO_OUT_LOW;
spin_lock_irqsave(&gpt->lock, flags);
clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_GPIO_MASK, r);
spin_unlock_irqrestore(&gpt->lock, flags);
}
static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct mpc52xx_gpt_priv *gpt = gc_to_mpc52xx_gpt(gc);
unsigned long flags;
dev_dbg(gpt->dev, "%s: gpio:%d\n", __func__, gpio);
spin_lock_irqsave(&gpt->lock, flags);
clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_GPIO_MASK);
spin_unlock_irqrestore(&gpt->lock, flags);
return 0;
}
static int
mpc52xx_gpt_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
mpc52xx_gpt_gpio_set(gc, gpio, val);
return 0;
}
static void
mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
{
int rc;
/* Only setup GPIO if the device tree claims the GPT is
* a GPIO controller */
if (!of_find_property(node, "gpio-controller", NULL))
return;
gpt->of_gc.gc.label = kstrdup(node->full_name, GFP_KERNEL);
if (!gpt->of_gc.gc.label) {
dev_err(gpt->dev, "out of memory\n");
return;
}
gpt->of_gc.gpio_cells = 2;
gpt->of_gc.gc.ngpio = 1;
gpt->of_gc.gc.direction_input = mpc52xx_gpt_gpio_dir_in;
gpt->of_gc.gc.direction_output = mpc52xx_gpt_gpio_dir_out;
gpt->of_gc.gc.get = mpc52xx_gpt_gpio_get;
gpt->of_gc.gc.set = mpc52xx_gpt_gpio_set;
gpt->of_gc.gc.base = -1;
gpt->of_gc.xlate = of_gpio_simple_xlate;
node->data = &gpt->of_gc;
of_node_get(node);
/* Setup external pin in GPIO mode */
clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK,
MPC52xx_GPT_MODE_MS_GPIO);
rc = gpiochip_add(&gpt->of_gc.gc);
if (rc)
dev_err(gpt->dev, "gpiochip_add() failed; rc=%i\n", rc);
dev_dbg(gpt->dev, "%s() complete.\n", __func__);
}
#else /* defined(CONFIG_GPIOLIB) */
static void
mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *p, struct device_node *np) { }
#endif /* defined(CONFIG_GPIOLIB) */
/***********************************************************************
* SYSFS attributes
*/
#if defined(CONFIG_SYSFS)
static ssize_t mpc52xx_gpt_show_regs(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct mpc52xx_gpt_priv *gpt = dev_get_drvdata(dev);
int i, len = 0;
u32 __iomem *regs = (void __iomem *) gpt->regs;
for (i = 0; i < 4; i++)
len += sprintf(buf + len, "%.8x ", in_be32(regs + i));
len += sprintf(buf + len, "\n");
return len;
}
static struct device_attribute mpc52xx_gpt_attrib[] = {
__ATTR(regs, S_IRUGO | S_IWUSR, mpc52xx_gpt_show_regs, NULL),
};
static void mpc52xx_gpt_create_attribs(struct mpc52xx_gpt_priv *gpt)
{
int i, err = 0;
for (i = 0; i < ARRAY_SIZE(mpc52xx_gpt_attrib); i++) {
err = device_create_file(gpt->dev, &mpc52xx_gpt_attrib[i]);
if (err)
dev_err(gpt->dev, "error creating attribute %i\n", i);
}
}
#else /* defined(CONFIG_SYSFS) */
static void mpc52xx_gpt_create_attribs(struct mpc52xx_gpt_priv *) { return 0; }
#endif /* defined(CONFIG_SYSFS) */
/* ---------------------------------------------------------------------
* of_platform bus binding code
*/
static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
struct mpc52xx_gpt_priv *gpt;
gpt = kzalloc(sizeof *gpt, GFP_KERNEL);
if (!gpt)
return -ENOMEM;
spin_lock_init(&gpt->lock);
gpt->dev = &ofdev->dev;
gpt->regs = of_iomap(ofdev->node, 0);
if (!gpt->regs) {
kfree(gpt);
return -ENOMEM;
}
dev_set_drvdata(&ofdev->dev, gpt);
mpc52xx_gpt_create_attribs(gpt);
mpc52xx_gpt_gpio_setup(gpt, ofdev->node);
mpc52xx_gpt_irq_setup(gpt, ofdev->node);
return 0;
}
static int mpc52xx_gpt_remove(struct of_device *ofdev)
{
return -EBUSY;
}
static const struct of_device_id mpc52xx_gpt_match[] = {
{ .compatible = "fsl,mpc5200-gpt", },
/* Depreciated compatible values; don't use for new dts files */
{ .compatible = "fsl,mpc5200-gpt-gpio", },
{ .compatible = "mpc5200-gpt", },
{}
};
static struct of_platform_driver mpc52xx_gpt_driver = {
.name = "mpc52xx-gpt",
.match_table = mpc52xx_gpt_match,
.probe = mpc52xx_gpt_probe,
.remove = mpc52xx_gpt_remove,
};
static int __init mpc52xx_gpt_init(void)
{
if (of_register_platform_driver(&mpc52xx_gpt_driver))
pr_err("error registering MPC52xx GPT driver\n");
return 0;
}
/* Make sure GPIOs and IRQs get set up before anyone tries to use them */
subsys_initcall(mpc52xx_gpt_init);
arch/powerpc/platforms/52xx/mpc52xx_pic.c
View file @ 6a4d7a90
......@@ -163,8 +163,6 @@ static void mpc52xx_extirq_mask(unsigned int virq)
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
io_be_clrbit(&intr->ctrl, 11 - l2irq);
}
......@@ -176,8 +174,6 @@ static void mpc52xx_extirq_unmask(unsigned int virq)
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
io_be_setbit(&intr->ctrl, 11 - l2irq);
}
......@@ -189,17 +185,15 @@ static void mpc52xx_extirq_ack(unsigned int virq)
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
io_be_setbit(&intr->ctrl, 27-l2irq);
}
static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type)
{
struct irq_desc *desc = get_irq_desc(virq);
u32 ctrl_reg, type;
int irq;
int l2irq;
void *handler = handle_level_irq;
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
......@@ -207,32 +201,21 @@ static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type)
pr_debug("%s: irq=%x. l2=%d flow_type=%d\n", __func__, irq, l2irq, flow_type);
switch (flow_type) {
case IRQF_TRIGGER_HIGH:
type = 0;
break;
case IRQF_TRIGGER_RISING:
type = 1;
break;
case IRQF_TRIGGER_FALLING:
type = 2;
break;
case IRQF_TRIGGER_LOW:
type = 3;
break;
case IRQF_TRIGGER_HIGH: type = 0; break;
case IRQF_TRIGGER_RISING: type = 1; handler = handle_edge_irq; break;
case IRQF_TRIGGER_FALLING: type = 2; handler = handle_edge_irq; break;
case IRQF_TRIGGER_LOW: type = 3; break;
default:
type = 0;
}
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
desc->status |= IRQ_LEVEL;
ctrl_reg = in_be32(&intr->ctrl);
ctrl_reg &= ~(0x3 << (22 - (l2irq * 2)));
ctrl_reg |= (type << (22 - (l2irq * 2)));
out_be32(&intr->ctrl, ctrl_reg);
__set_irq_handler_unlocked(virq, handler);
return 0;
}
......@@ -247,6 +230,11 @@ static struct irq_chip mpc52xx_extirq_irqchip = {
/*
* Main interrupt irq_chip
*/
static int mpc52xx_null_set_type(unsigned int virq, unsigned int flow_type)
{
return 0; /* Do nothing so that the sense mask will get updated */
}
static void mpc52xx_main_mask(unsigned int virq)
{
int irq;
......@@ -255,8 +243,6 @@ static void mpc52xx_main_mask(unsigned int virq)
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
io_be_setbit(&intr->main_mask, 16 - l2irq);
}
......@@ -268,8 +254,6 @@ static void mpc52xx_main_unmask(unsigned int virq)
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
io_be_clrbit(&intr->main_mask, 16 - l2irq);
}
......@@ -278,6 +262,7 @@ static struct irq_chip mpc52xx_main_irqchip = {
.mask = mpc52xx_main_mask,
.mask_ack = mpc52xx_main_mask,
.unmask = mpc52xx_main_unmask,
.set_type = mpc52xx_null_set_type,
};
/*
......@@ -291,8 +276,6 @@ static void mpc52xx_periph_mask(unsigned int virq)
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
io_be_setbit(&intr->per_mask, 31 - l2irq);
}
......@@ -304,8 +287,6 @@ static void mpc52xx_periph_unmask(unsigned int virq)
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
io_be_clrbit(&intr->per_mask, 31 - l2irq);
}
......@@ -314,6 +295,7 @@ static struct irq_chip mpc52xx_periph_irqchip = {
.mask = mpc52xx_periph_mask,
.mask_ack = mpc52xx_periph_mask,
.unmask = mpc52xx_periph_unmask,
.set_type = mpc52xx_null_set_type,
};
/*
......@@ -327,8 +309,6 @@ static void mpc52xx_sdma_mask(unsigned int virq)
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
io_be_setbit(&sdma->IntMask, l2irq);
}
......@@ -340,8 +320,6 @@ static void mpc52xx_sdma_unmask(unsigned int virq)
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
io_be_clrbit(&sdma->IntMask, l2irq);
}
......@@ -353,8 +331,6 @@ static void mpc52xx_sdma_ack(unsigned int virq)
irq = irq_map[virq].hwirq;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
out_be32(&sdma->IntPend, 1 << l2irq);
}
......@@ -363,8 +339,18 @@ static struct irq_chip mpc52xx_sdma_irqchip = {
.mask = mpc52xx_sdma_mask,
.unmask = mpc52xx_sdma_unmask,
.ack = mpc52xx_sdma_ack,
.set_type = mpc52xx_null_set_type,
};
/**
* mpc52xx_is_extirq - Returns true if hwirq number is for an external IRQ
*/
static int mpc52xx_is_extirq(int l1, int l2)
{
return ((l1 == 0) && (l2 == 0)) ||
((l1 == 1) && (l2 >= 1) && (l2 <= 3));
}
/**
* mpc52xx_irqhost_xlate - translate virq# from device tree interrupts property
*/
......@@ -383,37 +369,22 @@ static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node *ct,
intrvect_l1 = (int)intspec[0];
intrvect_l2 = (int)intspec[1];
intrvect_type = (int)intspec[2];
intrvect_type = (int)intspec[2] & 0x3;
intrvect_linux = (intrvect_l1 << MPC52xx_IRQ_L1_OFFSET) &
MPC52xx_IRQ_L1_MASK;
intrvect_linux |= intrvect_l2 & MPC52xx_IRQ_L2_MASK;
pr_debug("return %x, l1=%d, l2=%d\n", intrvect_linux, intrvect_l1,
intrvect_l2);
*out_hwirq = intrvect_linux;
*out_flags = mpc52xx_map_senses[intrvect_type];
*out_flags = IRQ_TYPE_LEVEL_LOW;
if (mpc52xx_is_extirq(intrvect_l1, intrvect_l2))
*out_flags = mpc52xx_map_senses[intrvect_type];
pr_debug("return %x, l1=%d, l2=%d\n", intrvect_linux, intrvect_l1,
intrvect_l2);
return 0;
}
/**
* mpc52xx_irqx_gettype - determine the IRQ sense type (level/edge)
*
* Only external IRQs need this.
*/
static int mpc52xx_irqx_gettype(int irq)
{
int type;
u32 ctrl_reg;
ctrl_reg = in_be32(&intr->ctrl);
type = (ctrl_reg >> (22 - irq * 2)) & 0x3;
return mpc52xx_map_senses[type];
}
/**
* mpc52xx_irqhost_map - Hook to map from virq to an irq_chip structure
*/
......@@ -422,68 +393,46 @@ static int mpc52xx_irqhost_map(struct irq_host *h, unsigned int virq,
{
int l1irq;
int l2irq;
struct irq_chip *good_irqchip;
void *good_handle;
struct irq_chip *irqchip;
void *hndlr;
int type;
u32 reg;
l1irq = (irq & MPC52xx_IRQ_L1_MASK) >> MPC52xx_IRQ_L1_OFFSET;
l2irq = irq & MPC52xx_IRQ_L2_MASK;
/*
* Most of ours IRQs will be level low
* Only external IRQs on some platform may be others
* External IRQs are handled differently by the hardware so they are
* handled by a dedicated irq_chip structure.
*/
type = IRQ_TYPE_LEVEL_LOW;
if (mpc52xx_is_extirq(l1irq, l2irq)) {
reg = in_be32(&intr->ctrl);
type = mpc52xx_map_senses[(reg >> (22 - l2irq * 2)) & 0x3];
if ((type == IRQ_TYPE_EDGE_FALLING) ||
(type == IRQ_TYPE_EDGE_RISING))
hndlr = handle_edge_irq;
else
hndlr = handle_level_irq;
set_irq_chip_and_handler(virq, &mpc52xx_extirq_irqchip, hndlr);
pr_debug("%s: External IRQ%i virq=%x, hw=%x. type=%x\n",
__func__, l2irq, virq, (int)irq, type);
return 0;
}
/* It is an internal SOC irq. Choose the correct irq_chip */
switch (l1irq) {
case MPC52xx_IRQ_L1_CRIT:
pr_debug("%s: Critical. l2=%x\n", __func__, l2irq);
BUG_ON(l2irq != 0);
type = mpc52xx_irqx_gettype(l2irq);
good_irqchip = &mpc52xx_extirq_irqchip;
break;
case MPC52xx_IRQ_L1_MAIN:
pr_debug("%s: Main IRQ[1-3] l2=%x\n", __func__, l2irq);
if ((l2irq >= 1) && (l2irq <= 3)) {
type = mpc52xx_irqx_gettype(l2irq);
good_irqchip = &mpc52xx_extirq_irqchip;
} else {
good_irqchip = &mpc52xx_main_irqchip;
}
break;
case MPC52xx_IRQ_L1_PERP:
pr_debug("%s: Peripherals. l2=%x\n", __func__, l2irq);
good_irqchip = &mpc52xx_periph_irqchip;
break;
case MPC52xx_IRQ_L1_SDMA:
pr_debug("%s: SDMA. l2=%x\n", __func__, l2irq);
good_irqchip = &mpc52xx_sdma_irqchip;
break;
case MPC52xx_IRQ_L1_MAIN: irqchip = &mpc52xx_main_irqchip; break;
case MPC52xx_IRQ_L1_PERP: irqchip = &mpc52xx_periph_irqchip; break;
case MPC52xx_IRQ_L1_SDMA: irqchip = &mpc52xx_sdma_irqchip; break;
default:
pr_err("%s: invalid virq requested (0x%x)\n", __func__, virq);
pr_err("%s: invalid irq: virq=%i, l1=%i, l2=%i\n",
__func__, virq, l1irq, l2irq);
return -EINVAL;
}
switch (type) {
case IRQ_TYPE_EDGE_FALLING:
case IRQ_TYPE_EDGE_RISING:
good_handle = handle_edge_irq;
break;
default:
good_handle = handle_level_irq;
}
set_irq_chip_and_handler(virq, good_irqchip, good_handle);
pr_debug("%s: virq=%x, hw=%x. type=%x\n", __func__, virq,
(int)irq, type);
set_irq_chip_and_handler(virq, irqchip, handle_level_irq);
pr_debug("%s: virq=%x, l1=%i, l2=%i\n", __func__, virq, l1irq, l2irq);
return 0;
}
......@@ -522,6 +471,8 @@ void __init mpc52xx_init_irq(void)
panic(__FILE__ ": find_and_map failed on 'mpc5200-bestcomm'. "
"Check node !");
pr_debug("MPC5200 IRQ controller mapped to 0x%p\n", intr);
/* Disable all interrupt sources. */
out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */
out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */
......@@ -613,8 +564,5 @@ unsigned int mpc52xx_get_irq(void)
}
}
pr_debug("%s: irq=%x. virq=%d\n", __func__, irq,
irq_linear_revmap(mpc52xx_irqhost, irq));
return irq_linear_revmap(mpc52xx_irqhost, irq);
}
drivers/net/fec_mpc52xx.c
View file @ 6a4d7a90
......@@ -1123,9 +1123,9 @@ static int mpc52xx_fec_of_resume(struct of_device *op)
#endif
static struct of_device_id mpc52xx_fec_match[] = {
{ .type = "network", .compatible = "fsl,mpc5200b-fec", },
{ .type = "network", .compatible = "fsl,mpc5200-fec", },
{ .type = "network", .compatible = "mpc5200-fec", },
{ .compatible = "fsl,mpc5200b-fec", },
{ .compatible = "fsl,mpc5200-fec", },
{ .compatible = "mpc5200-fec", },
{ }
};
......
drivers/serial/mpc52xx_uart.c
View file @ 6a4d7a90
......@@ -50,8 +50,8 @@
/* OF Platform device Usage :
*
* This driver is only used for PSCs configured in uart mode. The device
* tree will have a node for each PSC in uart mode w/ device_type = "serial"
* and "mpc52xx-psc-uart" in the compatible string
* tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible
* list.
*
* By default, PSC devices are enumerated in the order they are found. However
* a particular PSC number can be forces by adding 'device_no = <port#>'
......@@ -522,7 +522,7 @@ mpc52xx_uart_startup(struct uart_port *port)
/* Request IRQ */
ret = request_irq(port->irq, mpc52xx_uart_int,
IRQF_DISABLED | IRQF_SAMPLE_RANDOM | IRQF_SHARED,
IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
"mpc52xx_psc_uart", port);
if (ret)
return ret;
......@@ -1212,30 +1212,18 @@ mpc52xx_uart_of_resume(struct of_device *op)
#endif
static void
mpc52xx_uart_of_assign(struct device_node *np, int idx)
mpc52xx_uart_of_assign(struct device_node *np)
{
int free_idx = -1;
int i;
/* Find the first free node */
/* Find the first free PSC number */
for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
if (mpc52xx_uart_nodes[i] == NULL) {
free_idx = i;
break;
of_node_get(np);
mpc52xx_uart_nodes[i] = np;
return;
}
}
if ((idx < 0) || (idx >= MPC52xx_PSC_MAXNUM))
idx = free_idx;
if (idx < 0)
return; /* No free slot; abort */
of_node_get(np);
/* If the slot is already occupied, then swap slots */
if (mpc52xx_uart_nodes[idx] && (free_idx != -1))
mpc52xx_uart_nodes[free_idx] = mpc52xx_uart_nodes[idx];
mpc52xx_uart_nodes[idx] = np;
}
static void
......@@ -1243,23 +1231,17 @@ mpc52xx_uart_of_enumerate(void)
{
static int enum_done;
struct device_node *np;
const unsigned int *devno;
const struct of_device_id *match;
int i;
if (enum_done)
return;
for_each_node_by_type(np, "serial") {
/* Assign index to each PSC in device tree */
for_each_matching_node(np, mpc52xx_uart_of_match) {
match = of_match_node(mpc52xx_uart_of_match, np);
if (!match)
continue;
psc_ops = match->data;
/* Is a particular device number requested? */
devno = of_get_property(np, "port-number", NULL);
mpc52xx_uart_of_assign(np, devno ? *devno : -1);
mpc52xx_uart_of_assign(np);
}
enum_done = 1;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7