Commit 6ac94d3a authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This weeks' round of MIPS bug fixes for 3.18:

   - wire up the bpf syscall
   - fix TLB dump output for R3000 class TLBs
   - fix strnlen_user return value if no NUL character was found.
   - fix build with binutils 2.24.51+.  While there is no binutils 2.25
     release yet, toolchains derived from binutils 2.24.51+ are already
     in common use.
   - the Octeon GPIO code forgot to offline GPIO IRQs.
   - fix build error for XLP.
   - fix possible BUG assertion with EVA for CMA"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Fix build with binutils 2.24.51+
  MIPS: R3000: Fix debug output for Virtual page number
  MIPS: Fix strnlen_user() return value in case of overlong strings.
  MIPS: CMA: Do not reserve memory if not required
  MIPS: Wire up bpf syscall.
  MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
  MIPS: Octeon: Make Octeon GPIO IRQ chip CPU hotplug-aware
parents 661b99e9 842dfc11
......@@ -93,6 +93,15 @@ LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
KBUILD_AFLAGS_MODULE += -mlong-calls
KBUILD_CFLAGS_MODULE += -mlong-calls
#
# pass -msoft-float to GAS if it supports it. However on newer binutils
# (specifically newer than 2.24.51.20140728) we then also need to explicitly
# set ".set hardfloat" in all files which manipulate floating point registers.
#
ifneq ($(call as-option,-Wa$(comma)-msoft-float,),)
cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float
endif
cflags-y += -ffreestanding
#
......
......@@ -809,6 +809,7 @@ static struct irq_chip octeon_irq_chip_ciu_gpio_v2 = {
.irq_set_type = octeon_irq_ciu_gpio_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = octeon_irq_ciu_set_affinity_v2,
.irq_cpu_offline = octeon_irq_cpu_offline_ciu,
#endif
.flags = IRQCHIP_SET_TYPE_MASKED,
};
......@@ -823,6 +824,7 @@ static struct irq_chip octeon_irq_chip_ciu_gpio = {
.irq_set_type = octeon_irq_ciu_gpio_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = octeon_irq_ciu_set_affinity,
.irq_cpu_offline = octeon_irq_cpu_offline_ciu,
#endif
.flags = IRQCHIP_SET_TYPE_MASKED,
};
......
......@@ -13,6 +13,8 @@
#include <asm/mipsregs.h>
.macro fpu_save_single thread tmp=t0
.set push
SET_HARDFLOAT
cfc1 \tmp, fcr31
swc1 $f0, THREAD_FPR0_LS64(\thread)
swc1 $f1, THREAD_FPR1_LS64(\thread)
......@@ -47,9 +49,12 @@
swc1 $f30, THREAD_FPR30_LS64(\thread)
swc1 $f31, THREAD_FPR31_LS64(\thread)
sw \tmp, THREAD_FCR31(\thread)
.set pop
.endm
.macro fpu_restore_single thread tmp=t0
.set push
SET_HARDFLOAT
lw \tmp, THREAD_FCR31(\thread)
lwc1 $f0, THREAD_FPR0_LS64(\thread)
lwc1 $f1, THREAD_FPR1_LS64(\thread)
......@@ -84,6 +89,7 @@
lwc1 $f30, THREAD_FPR30_LS64(\thread)
lwc1 $f31, THREAD_FPR31_LS64(\thread)
ctc1 \tmp, fcr31
.set pop
.endm
.macro cpu_save_nonscratch thread
......
......@@ -57,6 +57,8 @@
#endif /* CONFIG_CPU_MIPSR2 */
.macro fpu_save_16even thread tmp=t0
.set push
SET_HARDFLOAT
cfc1 \tmp, fcr31
sdc1 $f0, THREAD_FPR0_LS64(\thread)
sdc1 $f2, THREAD_FPR2_LS64(\thread)
......@@ -75,11 +77,13 @@
sdc1 $f28, THREAD_FPR28_LS64(\thread)
sdc1 $f30, THREAD_FPR30_LS64(\thread)
sw \tmp, THREAD_FCR31(\thread)
.set pop
.endm
.macro fpu_save_16odd thread
.set push
.set mips64r2
SET_HARDFLOAT
sdc1 $f1, THREAD_FPR1_LS64(\thread)
sdc1 $f3, THREAD_FPR3_LS64(\thread)
sdc1 $f5, THREAD_FPR5_LS64(\thread)
......@@ -110,6 +114,8 @@
.endm
.macro fpu_restore_16even thread tmp=t0
.set push
SET_HARDFLOAT
lw \tmp, THREAD_FCR31(\thread)
ldc1 $f0, THREAD_FPR0_LS64(\thread)
ldc1 $f2, THREAD_FPR2_LS64(\thread)
......@@ -133,6 +139,7 @@
.macro fpu_restore_16odd thread
.set push
.set mips64r2
SET_HARDFLOAT
ldc1 $f1, THREAD_FPR1_LS64(\thread)
ldc1 $f3, THREAD_FPR3_LS64(\thread)
ldc1 $f5, THREAD_FPR5_LS64(\thread)
......@@ -277,6 +284,7 @@
.macro cfcmsa rd, cs
.set push
.set noat
SET_HARDFLOAT
.insn
.word CFC_MSA_INSN | (\cs << 11)
move \rd, $1
......@@ -286,6 +294,7 @@
.macro ctcmsa cd, rs
.set push
.set noat
SET_HARDFLOAT
move $1, \rs
.word CTC_MSA_INSN | (\cd << 6)
.set pop
......@@ -294,6 +303,7 @@
.macro ld_d wd, off, base
.set push
.set noat
SET_HARDFLOAT
add $1, \base, \off
.word LDD_MSA_INSN | (\wd << 6)
.set pop
......@@ -302,6 +312,7 @@
.macro st_d wd, off, base
.set push
.set noat
SET_HARDFLOAT
add $1, \base, \off
.word STD_MSA_INSN | (\wd << 6)
.set pop
......@@ -310,6 +321,7 @@
.macro copy_u_w rd, ws, n
.set push
.set noat
SET_HARDFLOAT
.insn
.word COPY_UW_MSA_INSN | (\n << 16) | (\ws << 11)
/* move triggers an assembler bug... */
......@@ -320,6 +332,7 @@
.macro copy_u_d rd, ws, n
.set push
.set noat
SET_HARDFLOAT
.insn
.word COPY_UD_MSA_INSN | (\n << 16) | (\ws << 11)
/* move triggers an assembler bug... */
......@@ -330,6 +343,7 @@
.macro insert_w wd, n, rs
.set push
.set noat
SET_HARDFLOAT
/* move triggers an assembler bug... */
or $1, \rs, zero
.word INSERT_W_MSA_INSN | (\n << 16) | (\wd << 6)
......@@ -339,6 +353,7 @@
.macro insert_d wd, n, rs
.set push
.set noat
SET_HARDFLOAT
/* move triggers an assembler bug... */
or $1, \rs, zero
.word INSERT_D_MSA_INSN | (\n << 16) | (\wd << 6)
......@@ -381,6 +396,7 @@
st_d 31, THREAD_FPR31, \thread
.set push
.set noat
SET_HARDFLOAT
cfcmsa $1, MSA_CSR
sw $1, THREAD_MSA_CSR(\thread)
.set pop
......@@ -389,6 +405,7 @@
.macro msa_restore_all thread
.set push
.set noat
SET_HARDFLOAT
lw $1, THREAD_MSA_CSR(\thread)
ctcmsa MSA_CSR, $1
.set pop
......@@ -441,6 +458,7 @@
.macro msa_init_all_upper
.set push
.set noat
SET_HARDFLOAT
not $1, zero
msa_init_upper 0
.set pop
......
......@@ -14,6 +14,20 @@
#include <asm/sgidefs.h>
/*
* starting with binutils 2.24.51.20140729, MIPS binutils warn about mixing
* hardfloat and softfloat object files. The kernel build uses soft-float by
* default, so we also need to pass -msoft-float along to GAS if it supports it.
* But this in turn causes assembler errors in files which access hardfloat
* registers. We detect if GAS supports "-msoft-float" in the Makefile and
* explicitly put ".set hardfloat" where floating point registers are touched.
*/
#ifdef GAS_HAS_SET_HARDFLOAT
#define SET_HARDFLOAT .set hardfloat
#else
#define SET_HARDFLOAT
#endif
#if _MIPS_SIM == _MIPS_SIM_ABI32
/*
......
......@@ -145,8 +145,8 @@ static inline void lose_fpu(int save)
if (is_msa_enabled()) {
if (save) {
save_msa(current);
asm volatile("cfc1 %0, $31"
: "=r"(current->thread.fpu.fcr31));
current->thread.fpu.fcr31 =
read_32bit_cp1_register(CP1_STATUS);
}
disable_msa();
clear_thread_flag(TIF_USEDMSA);
......
......@@ -1324,7 +1324,7 @@ do { \
/*
* Macros to access the floating point coprocessor control registers
*/
#define read_32bit_cp1_register(source) \
#define _read_32bit_cp1_register(source, gas_hardfloat) \
({ \
int __res; \
\
......@@ -1334,12 +1334,21 @@ do { \
" # gas fails to assemble cfc1 for some archs, \n" \
" # like Octeon. \n" \
" .set mips1 \n" \
" "STR(gas_hardfloat)" \n" \
" cfc1 %0,"STR(source)" \n" \
" .set pop \n" \
: "=r" (__res)); \
__res; \
})
#ifdef GAS_HAS_SET_HARDFLOAT
#define read_32bit_cp1_register(source) \
_read_32bit_cp1_register(source, .set hardfloat)
#else
#define read_32bit_cp1_register(source) \
_read_32bit_cp1_register(source, )
#endif
#ifdef HAVE_AS_DSP
#define rddsp(mask) \
({ \
......
......@@ -375,16 +375,17 @@
#define __NR_seccomp (__NR_Linux + 352)
#define __NR_getrandom (__NR_Linux + 353)
#define __NR_memfd_create (__NR_Linux + 354)
#define __NR_bpf (__NR_Linux + 355)
/*
* Offset of the last Linux o32 flavoured syscall
*/
#define __NR_Linux_syscalls 354
#define __NR_Linux_syscalls 355
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
#define __NR_O32_Linux_syscalls 354
#define __NR_O32_Linux_syscalls 355
#if _MIPS_SIM == _MIPS_SIM_ABI64
......@@ -707,16 +708,17 @@
#define __NR_seccomp (__NR_Linux + 312)
#define __NR_getrandom (__NR_Linux + 313)
#define __NR_memfd_create (__NR_Linux + 314)
#define __NR_bpf (__NR_Linux + 315)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
#define __NR_Linux_syscalls 314
#define __NR_Linux_syscalls 315
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
#define __NR_64_Linux_syscalls 314
#define __NR_64_Linux_syscalls 315
#if _MIPS_SIM == _MIPS_SIM_NABI32
......@@ -1043,15 +1045,16 @@
#define __NR_seccomp (__NR_Linux + 316)
#define __NR_getrandom (__NR_Linux + 317)
#define __NR_memfd_create (__NR_Linux + 318)
#define __NR_memfd_create (__NR_Linux + 319)
/*
* Offset of the last N32 flavoured syscall
*/
#define __NR_Linux_syscalls 318
#define __NR_Linux_syscalls 319
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
#define __NR_N32_Linux_syscalls 318
#define __NR_N32_Linux_syscalls 319
#endif /* _UAPI_ASM_UNISTD_H */
......@@ -144,7 +144,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
case mm_bc1t_op:
preempt_disable();
if (is_fpu_owner())
asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
......@@ -562,11 +562,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
case cop1_op:
preempt_disable();
if (is_fpu_owner())
asm volatile(
".set push\n"
"\t.set mips1\n"
"\tcfc1\t%0,$31\n"
"\t.set pop" : "=r" (fcr31));
fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
......
......@@ -358,6 +358,7 @@ NESTED(nmi_handler, PT_SIZE, sp)
.set push
/* gas fails to assemble cfc1 for some archs (octeon).*/ \
.set mips1
SET_HARDFLOAT
cfc1 a1, fcr31
li a2, ~(0x3f << 12)
and a2, a1
......
......@@ -28,6 +28,8 @@
.set mips1
/* Save floating point context */
LEAF(_save_fp_context)
.set push
SET_HARDFLOAT
li v0, 0 # assume success
cfc1 t1,fcr31
EX(swc1 $f0,(SC_FPREGS+0)(a0))
......@@ -65,6 +67,7 @@ LEAF(_save_fp_context)
EX(sw t1,(SC_FPC_CSR)(a0))
cfc1 t0,$0 # implementation/version
jr ra
.set pop
.set nomacro
EX(sw t0,(SC_FPC_EIR)(a0))
.set macro
......@@ -80,6 +83,8 @@ LEAF(_save_fp_context)
* stack frame which might have been changed by the user.
*/
LEAF(_restore_fp_context)
.set push
SET_HARDFLOAT
li v0, 0 # assume success
EX(lw t0,(SC_FPC_CSR)(a0))
EX(lwc1 $f0,(SC_FPREGS+0)(a0))
......@@ -116,6 +121,7 @@ LEAF(_restore_fp_context)
EX(lwc1 $f31,(SC_FPREGS+248)(a0))
jr ra
ctc1 t0,fcr31
.set pop
END(_restore_fp_context)
.set reorder
......
......@@ -120,6 +120,9 @@ LEAF(_restore_fp)
#define FPU_DEFAULT 0x00000000
.set push
SET_HARDFLOAT
LEAF(_init_fpu)
mfc0 t0, CP0_STATUS
li t1, ST0_CU1
......@@ -165,3 +168,5 @@ LEAF(_init_fpu)
mtc1 t0, $f31
jr ra
END(_init_fpu)
.set pop
......@@ -19,8 +19,12 @@
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
#undef fp
.macro EX insn, reg, src
.set push
SET_HARDFLOAT
.set nomacro
.ex\@: \insn \reg, \src
.set pop
......@@ -33,12 +37,17 @@
.set arch=r4000
LEAF(_save_fp_context)
.set push
SET_HARDFLOAT
cfc1 t1, fcr31
.set pop
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
.set push
SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
.set mips64r2
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS
sll t0, t0, 5
bgez t0, 1f # skip storing odd if FR=0
......@@ -64,6 +73,8 @@ LEAF(_save_fp_context)
1: .set pop
#endif
.set push
SET_HARDFLOAT
/* Store the 16 even double precision registers */
EX sdc1 $f0, SC_FPREGS+0(a0)
EX sdc1 $f2, SC_FPREGS+16(a0)
......@@ -84,11 +95,14 @@ LEAF(_save_fp_context)
EX sw t1, SC_FPC_CSR(a0)
jr ra
li v0, 0 # success
.set pop
END(_save_fp_context)
#ifdef CONFIG_MIPS32_COMPAT
/* Save 32-bit process floating point context */
LEAF(_save_fp_context32)
.set push
SET_HARDFLOAT
cfc1 t1, fcr31
mfc0 t0, CP0_STATUS
......@@ -134,6 +148,7 @@ LEAF(_save_fp_context32)
EX sw t1, SC32_FPC_CSR(a0)
cfc1 t0, $0 # implementation/version
EX sw t0, SC32_FPC_EIR(a0)
.set pop
jr ra
li v0, 0 # success
......@@ -150,8 +165,10 @@ LEAF(_restore_fp_context)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
.set push
SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
.set mips64r2
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS
sll t0, t0, 5
bgez t0, 1f # skip loading odd if FR=0
......@@ -175,6 +192,8 @@ LEAF(_restore_fp_context)
EX ldc1 $f31, SC_FPREGS+248(a0)
1: .set pop
#endif
.set push
SET_HARDFLOAT
EX ldc1 $f0, SC_FPREGS+0(a0)
EX ldc1 $f2, SC_FPREGS+16(a0)
EX ldc1 $f4, SC_FPREGS+32(a0)
......@@ -192,6 +211,7 @@ LEAF(_restore_fp_context)
EX ldc1 $f28, SC_FPREGS+224(a0)
EX ldc1 $f30, SC_FPREGS+240(a0)
ctc1 t1, fcr31
.set pop
jr ra
li v0, 0 # success
END(_restore_fp_context)
......@@ -199,6 +219,8 @@ LEAF(_restore_fp_context)
#ifdef CONFIG_MIPS32_COMPAT
LEAF(_restore_fp_context32)
/* Restore an o32 sigcontext. */
.set push
SET_HARDFLOAT
EX lw t1, SC32_FPC_CSR(a0)
mfc0 t0, CP0_STATUS
......@@ -242,6 +264,7 @@ LEAF(_restore_fp_context32)
ctc1 t1, fcr31
jr ra
li v0, 0 # success
.set pop
END(_restore_fp_context32)
#endif
......
......@@ -22,6 +22,9 @@
#include <asm/asmmacro.h>
/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
#undef fp
/*
* Offset to the current process status flags, the first 32 bytes of the
* stack are not used.
......@@ -65,8 +68,12 @@
bgtz a3, 1f
/* Save 128b MSA vector context + scalar FP control & status. */
.set push
SET_HARDFLOAT
cfc1 t1, fcr31
msa_save_all a0
.set pop /* SET_HARDFLOAT */
sw t1, THREAD_FCR31(a0)
b 2f
......@@ -161,6 +168,9 @@ LEAF(_init_msa_upper)
#define FPU_DEFAULT 0x00000000
.set push
SET_HARDFLOAT
LEAF(_init_fpu)
mfc0 t0, CP0_STATUS
li t1, ST0_CU1
......@@ -232,7 +242,8 @@ LEAF(_init_fpu)
#ifdef CONFIG_CPU_MIPS32_R2
.set push
.set mips64r2
.set mips32r2
.set fp=64
sll t0, t0, 5 # is Status.FR set?
bgez t0, 1f # no: skip setting upper 32b
......@@ -291,3 +302,5 @@ LEAF(_init_fpu)
#endif
jr ra
END(_init_fpu)
.set pop /* SET_HARDFLOAT */
......@@ -18,6 +18,9 @@
.set noreorder
.set mips2
.set push
SET_HARDFLOAT
/* Save floating point context */
LEAF(_save_fp_context)
mfc0 t0,CP0_STATUS
......@@ -85,3 +88,5 @@
1: jr ra
nop
END(_restore_fp_context)
.set pop /* SET_HARDFLOAT */
......@@ -579,3 +579,4 @@ EXPORT(sys_call_table)
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
PTR sys_bpf /* 4355 */
......@@ -434,4 +434,5 @@ EXPORT(sys_call_table)
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
PTR sys_bpf /* 5315 */
.size sys_call_table,.-sys_call_table
......@@ -427,4 +427,5 @@ EXPORT(sysn32_call_table)
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
PTR sys_bpf
.size sysn32_call_table,.-sysn32_call_table
......@@ -564,4 +564,5 @@ EXPORT(sys32_call_table)
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
PTR sys_bpf /* 4355 */
.size sys32_call_table,.-sys32_call_table
......@@ -683,6 +683,7 @@ static void __init arch_mem_init(char **cmdline_p)
dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
/* Tell bootmem about cma reserved memblock section */
for_each_memblock(reserved, reg)
if (reg->size != 0)
reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
}
......
......@@ -34,7 +34,7 @@ static void dump_tlb(int first, int last)
entrylo0 = read_c0_entrylo0();
/* Unused entries have a virtual address of KSEG0. */
if ((entryhi & 0xffffe000) != 0x80000000
if ((entryhi & 0xfffff000) != 0x80000000
&& (entryhi & 0xfc0) == asid) {
/*
* Only print entries in use
......@@ -43,7 +43,7 @@ static void dump_tlb(int first, int last)
printk("va=%08lx asid=%08lx"
" [pa=%06lx n=%d d=%d v=%d g=%d]",
(entryhi & 0xffffe000),
(entryhi & 0xfffff000),
entryhi & 0xfc0,
entrylo0 & PAGE_MASK,
(entrylo0 & (1 << 11)) ? 1 : 0,
......
......@@ -40,9 +40,11 @@ FEXPORT(__strnlen_\func\()_nocheck_asm)
.else
EX(lbe, t0, (v0), .Lfault\@)
.endif
PTR_ADDIU v0, 1
.set noreorder
bnez t0, 1b
1: PTR_SUBU v0, a0
1: PTR_ADDIU v0, 1
.set reorder
PTR_SUBU v0, a0
jr ra
END(__strnlen_\func\()_asm)
......
......@@ -584,11 +584,7 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
if (insn.i_format.rs == bc_op) {
preempt_disable();
if (is_fpu_owner())
asm volatile(
".set push\n"
"\t.set mips1\n"
"\tcfc1\t%0,$31\n"
"\t.set pop" : "=r" (fcr31));
fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
......
......@@ -443,10 +443,8 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
msg.data = 0xc00 | msixvec;
ret = irq_set_msi_desc(xirq, desc);
if (ret < 0) {
destroy_irq(xirq);
if (ret < 0)
return ret;
}
write_msi_msg(xirq, &msg);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment