Merge tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver update for 3.19-rc1

  Lots of little things all over the place in different drivers, and a
  new subsystem, "coresight" has been added.  Full details are in the
  shortlog"

* tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits)
  parport: parport_pc, do not remove parent devices early
  spmi: Remove shutdown/suspend/resume kernel-doc
  carma-fpga-program: drop videobuf dependency
  carma-fpga: drop videobuf dependency
  carma-fpga-program.c: fix compile errors
  i8k: Fix temperature bug handling in i8k_get_temp()
  cxl: Name interrupts in /proc/interrupt
  CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning
  coresight-replicator: remove .owner field for driver
  coresight: fixed comments in coresight.h
  coresight: fix typo in comment in coresight-priv.h
  coresight: bindings for coresight drivers
  coresight: Adding ABI documentation
  w1: support auto-load of w1_bq27000 module.
  w1: avoid potential u16 overflow
  cn: verify msg->len before making callback
  mei: export fw status registers through sysfs
  mei: read and print all six FW status registers
  mei: txe: add cherrytrail device id
  mei: kill cached host and me csr values
  ...

Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10

+What:		/sys/bus/coresight/devices/<memory_map>.etb/enable_sink
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Add/remove a sink from a trace path.  There can be multiple
+		source for a single sink.
+		ex: echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/status
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(R) List various control and status registers.  The specific
+		layout and content is driver specific.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etb/trigger_cntr
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Disables write access to the Trace RAM by stopping the
+		formatter after a defined number of words have been stored
+		following the trigger event. The number of 32-bit words written
+		into the Trace RAM following the trigger event is equal to the
+		value stored in this register+1 (from ARM ETB-TRM).

Documentation/ABI/testing/sysfs-bus-coresight-devices-funnel

+What:		/sys/bus/coresight/devices/<memory_map>.funnel/funnel_ctrl
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Enables the slave ports and defines the hold time of the
+		slave ports.
+
+What:		/sys/bus/coresight/devices/<memory_map>.funnel/priority
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Defines input port priority order.

Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc

+What:		/sys/bus/coresight/devices/<memory_map>.tmc/trigger_cntr
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RW) Disables write access to the Trace RAM by stopping the
+		formatter after a defined number of words have been stored
+		following the trigger event. Additional interface for this
+		driver are expected to be added as it matures.

Documentation/DocBook/uio-howto.tmpl

@@ -540,7 +540,7 @@ appears in sysfs.
 </para></listitem>
 
 <listitem><para>
-<varname>unsigned long size</varname>: Fill in the size of the
+<varname>resource_size_t size</varname>: Fill in the size of the
 memory block that <varname>addr</varname> points to. If <varname>size</varname>
 is zero, the mapping is considered unused. Note that you
 <emphasis>must</emphasis> initialize <varname>size</varname> with zero for

Documentation/devicetree/bindings/arm/coresight.txt

+* CoreSight Components:
+
+CoreSight components are compliant with the ARM CoreSight architecture
+specification and can be connected in various topologies to suit a particular
+SoCs tracing needs. These trace components can generally be classified as
+sinks, links and sources. Trace data produced by one or more sources flows
+through the intermediate links connecting the source to the currently selected
+sink. Each CoreSight component device should use these properties to describe
+its hardware characteristcs.
+
+* Required properties for all components *except* non-configurable replicators:
+
+	* compatible: These have to be supplemented with "arm,primecell" as
+	  drivers are using the AMBA bus interface.  Possible values include:
+		- "arm,coresight-etb10", "arm,primecell";
+		- "arm,coresight-tpiu", "arm,primecell";
+		- "arm,coresight-tmc", "arm,primecell";
+		- "arm,coresight-funnel", "arm,primecell";
+		- "arm,coresight-etm3x", "arm,primecell";
+
+	* reg: physical base address and length of the register
+	  set(s) of the component.
+
+	* clocks: the clock associated to this component.
+
+	* clock-names: the name of the clock as referenced by the code.
+	  Since we are using the AMBA framework, the name should be
+	  "apb_pclk".
+
+	* port or ports: The representation of the component's port
+	  layout using the generic DT graph presentation found in
+	  "bindings/graph.txt".
+
+* Required properties for devices that don't show up on the AMBA bus, such as
+  non-configurable replicators:
+
+	* compatible: Currently supported value is (note the absence of the
+	  AMBA markee):
+		- "arm,coresight-replicator"
+
+	* id: a unique number that will identify this replicator.
+
+	* port or ports: same as above.
+
+* Optional properties for ETM/PTMs:
+
+	* arm,cp14: must be present if the system accesses ETM/PTM management
+	  registers via co-processor 14.
+
+	* cpu: the cpu phandle this ETM/PTM is affined to. When omitted the
+	  source is considered to belong to CPU0.
+
+* Optional property for TMC:
+
+	* arm,buffer-size: size of contiguous buffer space for TMC ETR
+	 (embedded trace router)
+
+
+Example:
+
+1. Sinks
+	etb@20010000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		coresight-default-sink;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			etb_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port0>;
+			};
+		};
+	};
+
+	tpiu@20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			tpiu_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+2. Links
+	replicator {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+		/* this will show up in debugfs as "0.replicator" */
+		id = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&funnel_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@20040000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel_out_port0: endpoint {
+					remote-endpoint =
+							<&replicator_in_port0>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+		};
+	};
+
+3. Sources
+	ptm@2201c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201c000 0 0x1000>;
+
+		cpu = <&cpu0>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			ptm0_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port0>;
+			};
+		};
+	};
+
+	ptm@2201d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201d000 0 0x1000>;
+
+		cpu = <&cpu1>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			ptm1_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port1>;
+			};
+		};
+	};

MAINTAINERS

@@ -920,6 +920,15 @@ M:	Hubert Feurstein <hubert.feurstein@contec.at>
 S:	Maintained
 F:	arch/arm/mach-ep93xx/micro9.c
 
+ARM/CORESIGHT FRAMEWORK AND DRIVERS
+M:	Mathieu Poirier <mathieu.poirier@linaro.org>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/coresight/*
+F:	Documentation/trace/coresight.txt
+F:	Documentation/devicetree/bindings/arm/coresight.txt
+F:	Documentation/ABI/testing/sysfs-bus-coresight-devices-*
+
 ARM/CORGI MACHINE SUPPORT
 M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained

arch/arm/Kconfig.debug

@@ -1452,14 +1452,6 @@ config EARLY_PRINTK
 	  kernel low-level debugging functions. Add earlyprintk to your
 	  kernel parameters to enable this console.
 
-config OC_ETM
-	bool "On-chip ETM and ETB"
-	depends on ARM_AMBA
-	help
-	  Enables the on-chip embedded trace macrocell and embedded trace
-	  buffer driver that will allow you to collect traces of the
-	  kernel code.
-
 config ARM_KPROBES_TEST
 	tristate "Kprobes test module"
 	depends on KPROBES && MODULES
@@ -1486,4 +1478,59 @@ config DEBUG_SET_MODULE_RONX
 	  against certain classes of kernel exploits.
 	  If in doubt, say "N".
 
+menuconfig CORESIGHT
+	bool "CoreSight Tracing Support"
+	select ARM_AMBA
+	help
+	  This framework provides a kernel interface for the CoreSight debug
+	  and trace drivers to register themselves with. It's intended to build
+	  a topological view of the CoreSight components based on a DT
+	  specification and configure the right serie of components when a
+	  trace source gets enabled.
+
+if CORESIGHT
+config CORESIGHT_LINKS_AND_SINKS
+	bool "CoreSight Link and Sink drivers"
+	help
+	  This enables support for CoreSight link and sink drivers that are
+	  responsible for transporting and collecting the trace data
+	  respectively.  Link and sinks are dynamically aggregated with a trace
+	  entity at run time to form a complete trace path.
+
+config CORESIGHT_LINK_AND_SINK_TMC
+	bool "Coresight generic TMC driver"
+	depends on CORESIGHT_LINKS_AND_SINKS
+	help
+	  This enables support for the Trace Memory Controller driver.  Depending
+	  on its configuration the device can act as a link (embedded trace router
+	  - ETR) or sink (embedded trace FIFO).  The driver complies with the
+	  generic implementation of the component without special enhancement or
+	  added features.
+
+config CORESIGHT_SINK_TPIU
+	bool "Coresight generic TPIU driver"
+	depends on CORESIGHT_LINKS_AND_SINKS
+	help
+	  This enables support for the Trace Port Interface Unit driver, responsible
+	  for bridging the gap between the on-chip coresight components and a trace
+	  port collection engine, typically connected to an external host for use
+	  case capturing more traces than the on-board coresight memory can handle.
+
+config CORESIGHT_SINK_ETBV10
+	bool "Coresight ETBv1.0 driver"
+	depends on CORESIGHT_LINKS_AND_SINKS
+	help
+	  This enables support for the Embedded Trace Buffer version 1.0 driver
+	  that complies with the generic implementation of the component without
+	  special enhancement or added features.
+
+config CORESIGHT_SOURCE_ETM3X
+	bool "CoreSight Embedded Trace Macrocell 3.x driver"
+	select CORESIGHT_LINKS_AND_SINKS
+	help
+	  This driver provides support for processor ETM3.x and PTM1.x modules,
+	  which allows tracing the instructions that a processor is executing
+	  This is primarily useful for instruction level tracing.  Depending
+	  the ETM version data tracing may also be available.
+endif
 endmenu

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -145,6 +145,34 @@ tv_connector_in: endpoint {
 			};
 		};
 	};
+
+	etb@5401b000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x5401b000 0x1000>;
+
+		coresight-default-sink;
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		port {
+			etb_in: endpoint {
+				slave-mode;
+				remote-endpoint = <&etm_out>;
+			};
+		};
+	};
+
+	etm@54010000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x54010000 0x1000>;
+
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		port {
+			etm_out: endpoint {
+				remote-endpoint = <&etb_in>;
+			};
+		};
+	};
 };
 
 &omap3_pmx_wkup {

arch/arm/boot/dts/omap3-beagle.dts

@@ -140,6 +140,34 @@ tv_connector_in: endpoint {
 			};
 		};
 	};
+
+	etb@540000000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x5401b000 0x1000>;
+
+		coresight-default-sink;
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		port {
+			etb_in: endpoint {
+				slave-mode;
+				remote-endpoint = <&etm_out>;
+			};
+		};
+	};
+
+	etm@54010000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x54010000 0x1000>;
+
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		port {
+			etm_out: endpoint {
+				remote-endpoint = <&etb_in>;
+			};
+		};
+	};
 };
 
 &omap3_pmx_wkup {

arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts

@@ -358,6 +358,205 @@ energy@2 {
 		};
 	};
 
+	etb@0,20010000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		coresight-default-sink;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			etb_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port0>;
+			};
+		};
+	};
+
+	tpiu@0,20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			tpiu_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	replicator {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&funnel_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@0,20040000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator_in_port0>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			/* Input port #3 is for ITM, not supported here */
+
+			port@4 {
+				reg = <4>;
+				funnel_in_port4: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm1_out_port>;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				funnel_in_port5: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm2_out_port>;
+				};
+			};
+		};
+	};
+
+	ptm@0,2201c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201c000 0 0x1000>;
+
+		cpu = <&cpu0>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			ptm0_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port0>;
+			};
+		};
+	};
+
+	ptm@0,2201d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201d000 0 0x1000>;
+
+		cpu = <&cpu1>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			ptm1_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port1>;
+			};
+		};
+	};
+
+	etm@0,2203c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203c000 0 0x1000>;
+
+		cpu = <&cpu2>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			etm0_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port2>;
+			};
+		};
+	};
+
+	etm@0,2203d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203d000 0 0x1000>;
+
+		cpu = <&cpu3>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			etm1_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port4>;
+			};
+		};
+	};
+
+	etm@0,2203e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203e000 0 0x1000>;
+
+		cpu = <&cpu4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			etm2_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port5>;
+			};
+		};
+	};
+
 	smb {
 		compatible = "simple-bus";
 

arch/arm/include/asm/hardware/coresight.h

-/*
- * linux/arch/arm/include/asm/hardware/coresight.h
- *
- * CoreSight components' registers
- *
- * Copyright (C) 2009 Nokia Corporation.
- * Alexander Shishkin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_HARDWARE_CORESIGHT_H
-#define __ASM_HARDWARE_CORESIGHT_H
-
-#define TRACER_ACCESSED_BIT	0
-#define TRACER_RUNNING_BIT	1
-#define TRACER_CYCLE_ACC_BIT	2
-#define TRACER_ACCESSED		BIT(TRACER_ACCESSED_BIT)
-#define TRACER_RUNNING		BIT(TRACER_RUNNING_BIT)
-#define TRACER_CYCLE_ACC	BIT(TRACER_CYCLE_ACC_BIT)
-
-#define TRACER_TIMEOUT 10000
-
-#define etm_writel(t, v, x) \
-	(writel_relaxed((v), (t)->etm_regs + (x)))
-#define etm_readl(t, x) (readl_relaxed((t)->etm_regs + (x)))
-
-/* CoreSight Management Registers */
-#define CSMR_LOCKACCESS 0xfb0
-#define CSMR_LOCKSTATUS 0xfb4
-#define CSMR_AUTHSTATUS 0xfb8
-#define CSMR_DEVID	0xfc8
-#define CSMR_DEVTYPE	0xfcc
-/* CoreSight Component Registers */
-#define CSCR_CLASS	0xff4
-
-#define CS_LAR_KEY	0xc5acce55
-
-/* ETM control register, "ETM Architecture", 3.3.1 */
-#define ETMR_CTRL		0
-#define ETMCTRL_POWERDOWN	1
-#define ETMCTRL_PROGRAM		(1 << 10)
-#define ETMCTRL_PORTSEL		(1 << 11)
-#define ETMCTRL_DO_CONTEXTID	(3 << 14)
-#define ETMCTRL_PORTMASK1	(7 << 4)
-#define ETMCTRL_PORTMASK2	(1 << 21)
-#define ETMCTRL_PORTMASK	(ETMCTRL_PORTMASK1 | ETMCTRL_PORTMASK2)
-#define ETMCTRL_PORTSIZE(x) ((((x) & 7) << 4) | (!!((x) & 8)) << 21)
-#define ETMCTRL_DO_CPRT		(1 << 1)
-#define ETMCTRL_DATAMASK	(3 << 2)
-#define ETMCTRL_DATA_DO_DATA	(1 << 2)
-#define ETMCTRL_DATA_DO_ADDR	(1 << 3)
-#define ETMCTRL_DATA_DO_BOTH	(ETMCTRL_DATA_DO_DATA | ETMCTRL_DATA_DO_ADDR)
-#define ETMCTRL_BRANCH_OUTPUT	(1 << 8)
-#define ETMCTRL_CYCLEACCURATE	(1 << 12)
-
-/* ETM configuration code register */
-#define ETMR_CONFCODE		(0x04)
-
-/* ETM trace start/stop resource control register */
-#define ETMR_TRACESSCTRL	(0x18)
-
-/* ETM trigger event register */
-#define ETMR_TRIGEVT		(0x08)
-
-/* address access type register bits, "ETM architecture",
- * table 3-27 */
-/* - access type */
-#define ETMAAT_IFETCH		0
-#define ETMAAT_IEXEC		1
-#define ETMAAT_IEXECPASS	2
-#define ETMAAT_IEXECFAIL	3
-#define ETMAAT_DLOADSTORE	4
-#define ETMAAT_DLOAD		5
-#define ETMAAT_DSTORE		6
-/* - comparison access size */
-#define ETMAAT_JAVA		(0 << 3)
-#define ETMAAT_THUMB		(1 << 3)
-#define ETMAAT_ARM		(3 << 3)
-/* - data value comparison control */
-#define ETMAAT_NOVALCMP		(0 << 5)
-#define ETMAAT_VALMATCH		(1 << 5)
-#define ETMAAT_VALNOMATCH	(3 << 5)
-/* - exact match */
-#define ETMAAT_EXACTMATCH	(1 << 7)
-/* - context id comparator control */
-#define ETMAAT_IGNCONTEXTID	(0 << 8)
-#define ETMAAT_VALUE1		(1 << 8)
-#define ETMAAT_VALUE2		(2 << 8)
-#define ETMAAT_VALUE3		(3 << 8)
-/* - security level control */
-#define ETMAAT_IGNSECURITY	(0 << 10)
-#define ETMAAT_NSONLY		(1 << 10)
-#define ETMAAT_SONLY		(2 << 10)
-
-#define ETMR_COMP_VAL(x)	(0x40 + (x) * 4)
-#define ETMR_COMP_ACC_TYPE(x)	(0x80 + (x) * 4)
-
-/* ETM status register, "ETM Architecture", 3.3.2 */
-#define ETMR_STATUS		(0x10)
-#define ETMST_OVERFLOW		BIT(0)
-#define ETMST_PROGBIT		BIT(1)
-#define ETMST_STARTSTOP		BIT(2)
-#define ETMST_TRIGGER		BIT(3)
-
-#define etm_progbit(t)		(etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT)
-#define etm_started(t)		(etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP)
-#define etm_triggered(t)	(etm_readl((t), ETMR_STATUS) & ETMST_TRIGGER)
-
-#define ETMR_TRACEENCTRL2	0x1c
-#define ETMR_TRACEENCTRL	0x24
-#define ETMTE_INCLEXCL		BIT(24)
-#define ETMR_TRACEENEVT		0x20
-#define ETMCTRL_OPTS		(ETMCTRL_DO_CPRT | \
-				ETMCTRL_DATA_DO_ADDR | \
-				ETMCTRL_BRANCH_OUTPUT | \
-				ETMCTRL_DO_CONTEXTID)
-
-/* ETM management registers, "ETM Architecture", 3.5.24 */
-#define ETMMR_OSLAR	0x300
-#define ETMMR_OSLSR	0x304
-#define ETMMR_OSSRR	0x308
-#define ETMMR_PDSR	0x314
-
-/* ETB registers, "CoreSight Components TRM", 9.3 */
-#define ETBR_DEPTH		0x04
-#define ETBR_STATUS		0x0c
-#define ETBR_READMEM		0x10
-#define ETBR_READADDR		0x14
-#define ETBR_WRITEADDR		0x18
-#define ETBR_TRIGGERCOUNT	0x1c
-#define ETBR_CTRL		0x20
-#define ETBR_FORMATTERCTRL	0x304
-#define ETBFF_ENFTC		1
-#define ETBFF_ENFCONT		BIT(1)
-#define ETBFF_FONFLIN		BIT(4)
-#define ETBFF_MANUAL_FLUSH	BIT(6)
-#define ETBFF_TRIGIN		BIT(8)
-#define ETBFF_TRIGEVT		BIT(9)
-#define ETBFF_TRIGFL		BIT(10)
-
-#define etb_writel(t, v, x) \
-	(writel_relaxed((v), (t)->etb_regs + (x)))
-#define etb_readl(t, x) (readl_relaxed((t)->etb_regs + (x)))
-
-#define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0)
-#define etm_unlock(t) \
-	do { etm_writel((t), CS_LAR_KEY, CSMR_LOCKACCESS); } while (0)
-
-#define etb_lock(t) do { etb_writel((t), 0, CSMR_LOCKACCESS); } while (0)
-#define etb_unlock(t) \
-	do { etb_writel((t), CS_LAR_KEY, CSMR_LOCKACCESS); } while (0)
-
-#endif /* __ASM_HARDWARE_CORESIGHT_H */
-

arch/arm/kernel/Makefile

@@ -30,7 +30,6 @@ else
 obj-y		+= entry-armv.o
 endif
 
-obj-$(CONFIG_OC_ETM)		+= etm.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_FIQ)		+= fiq.o fiqasm.o

arch/arm/kernel/hw_breakpoint.c

@@ -29,6 +29,7 @@
 #include <linux/hw_breakpoint.h>
 #include <linux/smp.h>
 #include <linux/cpu_pm.h>
+#include <linux/coresight.h>
 
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
@@ -36,7 +37,6 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/kdebug.h>
 #include <asm/traps.h>
-#include <asm/hardware/coresight.h>
 
 /* Breakpoint currently in use for each BRP. */
 static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);
@@ -976,7 +976,7 @@ static void reset_ctrl_regs(void *unused)
 	 * Unconditionally clear the OS lock by writing a value
 	 * other than CS_LAR_KEY to the access register.
 	 */
-	ARM_DBG_WRITE(c1, c0, 4, ~CS_LAR_KEY);
+	ARM_DBG_WRITE(c1, c0, 4, ~CORESIGHT_UNLOCK);
 	isb();
 
 	/*

arch/arm/mach-omap2/Kconfig

@@ -278,14 +278,6 @@ config MACH_SBC3530
 	default y
 	select OMAP_PACKAGE_CUS
 
-config OMAP3_EMU
-	bool "OMAP3 debugging peripherals"
-	depends on ARCH_OMAP3
-	select ARM_AMBA
-	select OC_ETM
-	help
-	  Say Y here to enable debugging hardware of omap3
-
 config OMAP3_SDRC_AC_TIMING
 	bool "Enable SDRC AC timing register changes"
 	depends on ARCH_OMAP3

arch/arm/mach-omap2/Makefile

@@ -228,7 +228,6 @@ obj-$(CONFIG_SOC_OMAP5)			+= omap_hwmod_54xx_data.o
 obj-$(CONFIG_SOC_DRA7XX)		+= omap_hwmod_7xx_data.o
 
 # EMU peripherals
-obj-$(CONFIG_OMAP3_EMU)			+= emu.o
 obj-$(CONFIG_HW_PERF_EVENTS)		+= pmu.o
 
 iommu-$(CONFIG_OMAP_IOMMU)		:= omap-iommu.o

arch/arm/mach-omap2/emu.c

-/*
- * emu.c
- *
- * ETM and ETB CoreSight components' resources as found in OMAP3xxx.
- *
- * Copyright (C) 2009 Nokia Corporation.
- * Alexander Shishkin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include "soc.h"
-#include "iomap.h"
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Alexander Shishkin");
-
-/* Cortex CoreSight components within omap3xxx EMU */
-#define ETM_BASE	(L4_EMU_34XX_PHYS + 0x10000)
-#define DBG_BASE	(L4_EMU_34XX_PHYS + 0x11000)
-#define ETB_BASE	(L4_EMU_34XX_PHYS + 0x1b000)
-#define DAPCTL		(L4_EMU_34XX_PHYS + 0x1d000)
-
-static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL);
-static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL);
-
-static int __init emu_init(void)
-{
-	if (!cpu_is_omap34xx())
-		return -ENODEV;
-
-	amba_device_register(&omap3_etb_device, &iomem_resource);
-	amba_device_register(&omap3_etm_device, &iomem_resource);
-
-	return 0;
-}
-
-omap_subsys_initcall(emu_init);

drivers/Makefile

@@ -161,3 +161,4 @@ obj-$(CONFIG_POWERCAP)		+= powercap/
 obj-$(CONFIG_MCB)		+= mcb/
 obj-$(CONFIG_RAS)		+= ras/
 obj-$(CONFIG_THUNDERBOLT)	+= thunderbolt/
+obj-$(CONFIG_CORESIGHT)		+= coresight/

drivers/amba/bus.c

@@ -343,7 +343,7 @@ int amba_device_add(struct amba_device *dev, struct resource *parent)
 
 		amba_put_disable_pclk(dev);
 
-		if (cid == AMBA_CID)
+		if (cid == AMBA_CID || cid == CORESIGHT_CID)
 			dev->periphid = pid;
 
 		if (!dev->periphid)

drivers/char/hangcheck-timer.c

@@ -168,8 +168,8 @@ static int __init hangcheck_init(void)
 	printk("Hangcheck: starting hangcheck timer %s (tick is %d seconds, margin is %d seconds).\n",
 	       VERSION_STR, hangcheck_tick, hangcheck_margin);
 	hangcheck_tsc_margin =
-		(unsigned long long)(hangcheck_margin + hangcheck_tick);
-	hangcheck_tsc_margin *= (unsigned long long)TIMER_FREQ;
+		(unsigned long long)hangcheck_margin + hangcheck_tick;
+	hangcheck_tsc_margin *= TIMER_FREQ;
 
 	hangcheck_tsc = ktime_get_ns();
 	mod_timer(&hangcheck_ticktock, jiffies + (hangcheck_tick*HZ));

drivers/char/i8k.c

@@ -298,7 +298,7 @@ static int i8k_get_temp(int sensor)
 	int temp;
 
 #ifdef I8K_TEMPERATURE_BUG
-	static int prev[4];
+	static int prev[4] = { I8K_MAX_TEMP+1, I8K_MAX_TEMP+1, I8K_MAX_TEMP+1, I8K_MAX_TEMP+1 };
 #endif
 	regs.ebx = sensor & 0xff;
 	rc = i8k_smm(&regs);
@@ -317,10 +317,12 @@ static int i8k_get_temp(int sensor)
 	 */
 	if (temp > I8K_MAX_TEMP) {
 		temp = prev[sensor];
-		prev[sensor] = I8K_MAX_TEMP;
+		prev[sensor] = I8K_MAX_TEMP+1;
 	} else {
 		prev[sensor] = temp;
 	}
+	if (temp > I8K_MAX_TEMP)
+		return -ERANGE;
 #endif
 
 	return temp;
@@ -499,6 +501,8 @@ static ssize_t i8k_hwmon_show_temp(struct device *dev,
 	int temp;
 
 	temp = i8k_get_temp(index);
+	if (temp == -ERANGE)
+		return -EINVAL;
 	if (temp < 0)
 		return temp;
 	return sprintf(buf, "%d\n", temp * 1000);
@@ -610,17 +614,17 @@ static int __init i8k_init_hwmon(void)
 
 	/* CPU temperature attributes, if temperature reading is OK */
 	err = i8k_get_temp(0);
-	if (err >= 0)
+	if (err >= 0 || err == -ERANGE)
 		i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP1;
 	/* check for additional temperature sensors */
 	err = i8k_get_temp(1);
-	if (err >= 0)
+	if (err >= 0 || err == -ERANGE)
 		i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP2;
 	err = i8k_get_temp(2);
-	if (err >= 0)
+	if (err >= 0 || err == -ERANGE)
 		i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP3;
 	err = i8k_get_temp(3);
-	if (err >= 0)
+	if (err >= 0 || err == -ERANGE)
 		i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP4;
 
 	/* Left fan attributes, if left fan is present */
@@ -710,6 +714,14 @@ static struct dmi_system_id i8k_dmi_table[] __initdata = {
 		},
 		.driver_data = (void *)&i8k_config_data[DELL_LATITUDE_D520],
 	},
+	{
+		.ident = "Dell Latitude E6440",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6440"),
+		},
+		.driver_data = (void *)&i8k_config_data[DELL_LATITUDE_E6540],
+	},
 	{
 		.ident = "Dell Latitude E6540",
 		.matches = {
@@ -788,6 +800,8 @@ static struct dmi_system_id i8k_dmi_table[] __initdata = {
 	{ }
 };
 
+MODULE_DEVICE_TABLE(dmi, i8k_dmi_table);
+
 /*
  * Probe for the presence of a supported laptop.
  */

drivers/connector/connector.c

@@ -141,12 +141,18 @@ EXPORT_SYMBOL_GPL(cn_netlink_send);
  */
 static int cn_call_callback(struct sk_buff *skb)
 {
+	struct nlmsghdr *nlh;
 	struct cn_callback_entry *i, *cbq = NULL;
 	struct cn_dev *dev = &cdev;
 	struct cn_msg *msg = nlmsg_data(nlmsg_hdr(skb));
 	struct netlink_skb_parms *nsp = &NETLINK_CB(skb);
 	int err = -ENODEV;
 
+	/* verify msg->len is within skb */
+	nlh = nlmsg_hdr(skb);
+	if (nlh->nlmsg_len < NLMSG_HDRLEN + sizeof(struct cn_msg) + msg->len)
+		return -EINVAL;
+
 	spin_lock_bh(&dev->cbdev->queue_lock);
 	list_for_each_entry(i, &dev->cbdev->queue_list, callback_entry) {
 		if (cn_cb_equal(&i->id.id, &msg->id)) {

drivers/coresight/Makefile

+#
+# Makefile for CoreSight drivers.
+#
+obj-$(CONFIG_CORESIGHT) += coresight.o
+obj-$(CONFIG_OF) += of_coresight.o
+obj-$(CONFIG_CORESIGHT_LINK_AND_SINK_TMC) += coresight-tmc.o
+obj-$(CONFIG_CORESIGHT_SINK_TPIU) += coresight-tpiu.o
+obj-$(CONFIG_CORESIGHT_SINK_ETBV10) += coresight-etb10.o
+obj-$(CONFIG_CORESIGHT_LINKS_AND_SINKS) += coresight-funnel.o \
+					   coresight-replicator.o
+obj-$(CONFIG_CORESIGHT_SOURCE_ETM3X) += coresight-etm3x.o coresight-etm-cp14.o

drivers/coresight/coresight-etm.h

+/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CORESIGHT_CORESIGHT_ETM_H
+#define _CORESIGHT_CORESIGHT_ETM_H
+
+#include <linux/spinlock.h>
+#include "coresight-priv.h"
+
+/*
+ * Device registers:
+ * 0x000 - 0x2FC: Trace         registers
+ * 0x300 - 0x314: Management    registers
+ * 0x318 - 0xEFC: Trace         registers
+ *
+ * Coresight registers
+ * 0xF00 - 0xF9C: Management    registers
+ * 0xFA0 - 0xFA4: Management    registers in PFTv1.0
+ *                Trace         registers in PFTv1.1
+ * 0xFA8 - 0xFFC: Management    registers
+ */
+
+/* Trace registers (0x000-0x2FC) */
+#define ETMCR			0x000
+#define ETMCCR			0x004
+#define ETMTRIGGER		0x008
+#define ETMSR			0x010
+#define ETMSCR			0x014
+#define ETMTSSCR		0x018
+#define ETMTECR2		0x01c
+#define ETMTEEVR		0x020
+#define ETMTECR1		0x024
+#define ETMFFLR			0x02c
+#define ETMACVRn(n)		(0x040 + (n * 4))
+#define ETMACTRn(n)		(0x080 + (n * 4))
+#define ETMCNTRLDVRn(n)		(0x140 + (n * 4))
+#define ETMCNTENRn(n)		(0x150 + (n * 4))
+#define ETMCNTRLDEVRn(n)	(0x160 + (n * 4))
+#define ETMCNTVRn(n)		(0x170 + (n * 4))
+#define ETMSQ12EVR		0x180
+#define ETMSQ21EVR		0x184
+#define ETMSQ23EVR		0x188
+#define ETMSQ31EVR		0x18c
+#define ETMSQ32EVR		0x190
+#define ETMSQ13EVR		0x194
+#define ETMSQR			0x19c
+#define ETMEXTOUTEVRn(n)	(0x1a0 + (n * 4))
+#define ETMCIDCVRn(n)		(0x1b0 + (n * 4))
+#define ETMCIDCMR		0x1bc
+#define ETMIMPSPEC0		0x1c0
+#define ETMIMPSPEC1		0x1c4
+#define ETMIMPSPEC2		0x1c8
+#define ETMIMPSPEC3		0x1cc
+#define ETMIMPSPEC4		0x1d0
+#define ETMIMPSPEC5		0x1d4
+#define ETMIMPSPEC6		0x1d8
+#define ETMIMPSPEC7		0x1dc
+#define ETMSYNCFR		0x1e0
+#define ETMIDR			0x1e4
+#define ETMCCER			0x1e8
+#define ETMEXTINSELR		0x1ec
+#define ETMTESSEICR		0x1f0
+#define ETMEIBCR		0x1f4
+#define ETMTSEVR		0x1f8
+#define ETMAUXCR		0x1fc
+#define ETMTRACEIDR		0x200
+#define ETMVMIDCVR		0x240
+/* Management registers (0x300-0x314) */
+#define ETMOSLAR		0x300
+#define ETMOSLSR		0x304
+#define ETMOSSRR		0x308
+#define ETMPDCR			0x310
+#define ETMPDSR			0x314
+#define ETM_MAX_ADDR_CMP	16
+#define ETM_MAX_CNTR		4
+#define ETM_MAX_CTXID_CMP	3
+
+/* Register definition */
+/* ETMCR - 0x00 */
+#define ETMCR_PWD_DWN		BIT(0)
+#define ETMCR_STALL_MODE	BIT(7)
+#define ETMCR_ETM_PRG		BIT(10)
+#define ETMCR_ETM_EN		BIT(11)
+#define ETMCR_CYC_ACC		BIT(12)
+#define ETMCR_CTXID_SIZE	(BIT(14)|BIT(15))
+#define ETMCR_TIMESTAMP_EN	BIT(28)
+/* ETMCCR - 0x04 */
+#define ETMCCR_FIFOFULL		BIT(23)
+/* ETMPDCR - 0x310 */
+#define ETMPDCR_PWD_UP		BIT(3)
+/* ETMTECR1 - 0x024 */
+#define ETMTECR1_ADDR_COMP_1	BIT(0)
+#define ETMTECR1_INC_EXC	BIT(24)
+#define ETMTECR1_START_STOP	BIT(25)
+/* ETMCCER - 0x1E8 */
+#define ETMCCER_TIMESTAMP	BIT(22)
+
+#define ETM_MODE_EXCLUDE	BIT(0)
+#define ETM_MODE_CYCACC		BIT(1)
+#define ETM_MODE_STALL		BIT(2)
+#define ETM_MODE_TIMESTAMP	BIT(3)
+#define ETM_MODE_CTXID		BIT(4)
+#define ETM_MODE_ALL		0x1f
+
+#define ETM_SQR_MASK		0x3
+#define ETM_TRACEID_MASK	0x3f
+#define ETM_EVENT_MASK		0x1ffff
+#define ETM_SYNC_MASK		0xfff
+#define ETM_ALL_MASK		0xffffffff
+
+#define ETMSR_PROG_BIT		1
+#define ETM_SEQ_STATE_MAX_VAL	(0x2)
+#define PORT_SIZE_MASK		(GENMASK(21, 21) | GENMASK(6, 4))
+
+#define ETM_HARD_WIRE_RES_A	/* Hard wired, always true */	\
+				((0x0f << 0)	|		\
+				/* Resource index A */		\
+				(0x06 << 4))
+
+#define ETM_ADD_COMP_0		/* Single addr comparator 1 */	\
+				((0x00 << 7)	|		\
+				/* Resource index B */		\
+				(0x00 << 11))
+
+#define ETM_EVENT_NOT_A		BIT(14) /* NOT(A) */
+
+#define ETM_DEFAULT_EVENT_VAL	(ETM_HARD_WIRE_RES_A	|	\
+				 ETM_ADD_COMP_0		|	\
+				 ETM_EVENT_NOT_A)
+/**
+ * struct etm_drvdata - specifics associated to an ETM component
+ * @base:	memory mapped base address for this component.
+ * @dev:	the device entity associated to this component.
+ * @csdev:	component vitals needed by the framework.
+ * @clk:	the clock this component is associated to.
+ * @spinlock:	only one at a time pls.
+ * @cpu:	the cpu this component is affined to.
+ * @port_size:	port size as reported by ETMCR bit 4-6 and 21.
+ * @arch:	ETM/PTM version number.
+ * @use_cpu14:	true if management registers need to be accessed via CP14.
+ * @enable:	is this ETM/PTM currently tracing.
+ * @sticky_enable: true if ETM base configuration has been done.
+ * @boot_enable:true if we should start tracing at boot time.
+ * @os_unlock:	true if access to management registers is allowed.
+ * @nr_addr_cmp:Number of pairs of address comparators as found in ETMCCR.
+ * @nr_cntr:	Number of counters as found in ETMCCR bit 13-15.
+ * @nr_ext_inp:	Number of external input as found in ETMCCR bit 17-19.
+ * @nr_ext_out:	Number of external output as found in ETMCCR bit 20-22.
+ * @nr_ctxid_cmp: Number of contextID comparators as found in ETMCCR bit 24-25.
+ * @etmccr:	value of register ETMCCR.
+ * @etmccer:	value of register ETMCCER.
+ * @traceid:	value of the current ID for this component.
+ * @mode:	controls various modes supported by this ETM/PTM.
+ * @ctrl:	used in conjunction with @mode.
+ * @trigger_event: setting for register ETMTRIGGER.
+ * @startstop_ctrl: setting for register ETMTSSCR.
+ * @enable_event: setting for register ETMTEEVR.
+ * @enable_ctrl1: setting for register ETMTECR1.
+ * @fifofull_level: setting for register ETMFFLR.
+ * @addr_idx:	index for the address comparator selection.
+ * @addr_val:	value for address comparator register.
+ * @addr_acctype: access type for address comparator register.
+ * @addr_type:	current status of the comparator register.
+ * @cntr_idx:	index for the counter register selection.
+ * @cntr_rld_val: reload value of a counter register.
+ * @cntr_event:	control for counter enable register.
+ * @cntr_rld_event: value for counter reload event register.
+ * @cntr_val:	counter value register.
+ * @seq_12_event: event causing the transition from 1 to 2.
+ * @seq_21_event: event causing the transition from 2 to 1.
+ * @seq_23_event: event causing the transition from 2 to 3.
+ * @seq_31_event: event causing the transition from 3 to 1.
+ * @seq_32_event: event causing the transition from 3 to 2.
+ * @seq_13_event: event causing the transition from 1 to 3.
+ * @seq_curr_state: current value of the sequencer register.
+ * @ctxid_idx: index for the context ID registers.
+ * @ctxid_val: value for the context ID to trigger on.
+ * @ctxid_mask: mask applicable to all the context IDs.
+ * @sync_freq:	Synchronisation frequency.
+ * @timestamp_event: Defines an event that requests the insertion
+		     of a timestamp into the trace stream.
+ */
+struct etm_drvdata {
+	void __iomem			*base;
+	struct device			*dev;
+	struct coresight_device		*csdev;
+	struct clk			*clk;
+	spinlock_t			spinlock;
+	int				cpu;
+	int				port_size;
+	u8				arch;
+	bool				use_cp14;
+	bool				enable;
+	bool				sticky_enable;
+	bool				boot_enable;
+	bool				os_unlock;
+	u8				nr_addr_cmp;
+	u8				nr_cntr;
+	u8				nr_ext_inp;
+	u8				nr_ext_out;
+	u8				nr_ctxid_cmp;
+	u32				etmccr;
+	u32				etmccer;
+	u32				traceid;
+	u32				mode;
+	u32				ctrl;
+	u32				trigger_event;
+	u32				startstop_ctrl;
+	u32				enable_event;
+	u32				enable_ctrl1;
+	u32				fifofull_level;
+	u8				addr_idx;
+	u32				addr_val[ETM_MAX_ADDR_CMP];
+	u32				addr_acctype[ETM_MAX_ADDR_CMP];
+	u32				addr_type[ETM_MAX_ADDR_CMP];
+	u8				cntr_idx;
+	u32				cntr_rld_val[ETM_MAX_CNTR];
+	u32				cntr_event[ETM_MAX_CNTR];
+	u32				cntr_rld_event[ETM_MAX_CNTR];
+	u32				cntr_val[ETM_MAX_CNTR];
+	u32				seq_12_event;
+	u32				seq_21_event;
+	u32				seq_23_event;
+	u32				seq_31_event;
+	u32				seq_32_event;
+	u32				seq_13_event;
+	u32				seq_curr_state;
+	u8				ctxid_idx;
+	u32				ctxid_val[ETM_MAX_CTXID_CMP];
+	u32				ctxid_mask;
+	u32				sync_freq;
+	u32				timestamp_event;
+};
+
+enum etm_addr_type {
+	ETM_ADDR_TYPE_NONE,
+	ETM_ADDR_TYPE_SINGLE,
+	ETM_ADDR_TYPE_RANGE,
+	ETM_ADDR_TYPE_START,
+	ETM_ADDR_TYPE_STOP,
+};
+#endif

drivers/coresight/coresight-priv.h

+/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CORESIGHT_PRIV_H
+#define _CORESIGHT_PRIV_H
+
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/coresight.h>
+
+/*
+ * Coresight management registers (0xf00-0xfcc)
+ * 0xfa0 - 0xfa4: Management	registers in PFTv1.0
+ *		  Trace		registers in PFTv1.1
+ */
+#define CORESIGHT_ITCTRL	0xf00
+#define CORESIGHT_CLAIMSET	0xfa0
+#define CORESIGHT_CLAIMCLR	0xfa4
+#define CORESIGHT_LAR		0xfb0
+#define CORESIGHT_LSR		0xfb4
+#define CORESIGHT_AUTHSTATUS	0xfb8
+#define CORESIGHT_DEVID		0xfc8
+#define CORESIGHT_DEVTYPE	0xfcc
+
+#define TIMEOUT_US		100
+#define BMVAL(val, lsb, msb)	((val & GENMASK(msb, lsb)) >> lsb)
+
+static inline void CS_LOCK(void __iomem *addr)
+{
+	do {
+		/* Wait for things to settle */
+		mb();
+		writel_relaxed(0x0, addr + CORESIGHT_LAR);
+	} while (0);
+}
+
+static inline void CS_UNLOCK(void __iomem *addr)
+{
+	do {
+		writel_relaxed(CORESIGHT_UNLOCK, addr + CORESIGHT_LAR);
+		/* Make sure everyone has seen this */
+		mb();
+	} while (0);
+}
+
+#ifdef CONFIG_CORESIGHT_SOURCE_ETM3X
+extern int etm_readl_cp14(u32 off, unsigned int *val);
+extern int etm_writel_cp14(u32 off, u32 val);
+#else
+static inline int etm_readl_cp14(u32 off, unsigned int *val) { return 0; }
+static inline int etm_writel_cp14(u32 val, u32 off) { return 0; }
+#endif
+
+#endif

drivers/extcon/extcon-class.c

@@ -29,6 +29,7 @@
 #include <linux/fs.h>
 #include <linux/err.h>
 #include <linux/extcon.h>
+#include <linux/of.h>
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/of.h>
@@ -997,13 +998,16 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
 		return ERR_PTR(-ENODEV);
 	}
 
-	edev = extcon_get_extcon_dev(node->name);
-	if (!edev) {
-		dev_err(dev, "unable to get extcon device : %s\n", node->name);
-		return ERR_PTR(-ENODEV);
+	mutex_lock(&extcon_dev_list_lock);
+	list_for_each_entry(edev, &extcon_dev_list, entry) {
+		if (edev->dev.parent && edev->dev.parent->of_node == node) {
+			mutex_unlock(&extcon_dev_list_lock);
+			return edev;
+		}
 	}
+	mutex_unlock(&extcon_dev_list_lock);
 
-	return edev;
+	return ERR_PTR(-EPROBE_DEFER);
 }
 #else
 struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)

drivers/extcon/extcon-max14577.c

 /*
  * extcon-max14577.c - MAX14577/77836 extcon driver to support MUIC
  *
- * Copyright (C) 2013,2014 Samsung Electrnoics
+ * Copyright (C) 2013,2014 Samsung Electronics
  * Chanwoo Choi <cw00.choi@samsung.com>
  * Krzysztof Kozlowski <k.kozlowski@samsung.com>
  *

drivers/extcon/extcon-max77693.c

@@ -232,7 +232,7 @@ static const char *max77693_extcon_cable[] = {
 	[EXTCON_CABLE_JIG_USB_ON]		= "JIG-USB-ON",
 	[EXTCON_CABLE_JIG_USB_OFF]		= "JIG-USB-OFF",
 	[EXTCON_CABLE_JIG_UART_OFF]		= "JIG-UART-OFF",
-	[EXTCON_CABLE_JIG_UART_ON]		= "Dock-Car",
+	[EXTCON_CABLE_JIG_UART_ON]		= "JIG-UART-ON",
 	[EXTCON_CABLE_DOCK_SMART]		= "Dock-Smart",
 	[EXTCON_CABLE_DOCK_DESK]		= "Dock-Desk",
 	[EXTCON_CABLE_DOCK_AUDIO]		= "Dock-Audio",
@@ -532,9 +532,6 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 		extcon_set_cable_state(info->edev, "Dock-Smart", attached);
 		extcon_set_cable_state(info->edev, "MHL", attached);
 		goto out;
-	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* Dock-Car */
-		strcpy(dock_name, "Dock-Car");
-		break;
 	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
 		strcpy(dock_name, "Dock-Desk");
 		break;
@@ -669,6 +666,11 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 		strcpy(cable_name, "JIG-UART-OFF");
 		path = CONTROL1_SW_UART;
 		break;
+	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* ADC_JIG_UART_ON */
+		/* PATH:AP_UART */
+		strcpy(cable_name, "JIG-UART-ON");
+		path = CONTROL1_SW_UART;
+		break;
 	default:
 		dev_err(info->dev, "failed to detect %s jig cable\n",
 			attached ? "attached" : "detached");
@@ -708,13 +710,13 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info)
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:
 	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:
+	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:
 		/* JIG */
 		ret = max77693_muic_jig_handler(info, cable_type, attached);
 		if (ret < 0)
 			return ret;
 		break;
 	case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
-	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* Dock-Car */
 	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
 	case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
 		/*

drivers/misc/fuse/Makefile

-obj-$(CONFIG_ARCH_TEGRA)	+= tegra/

drivers/misc/mei/pci-txe.c

@@ -37,6 +37,7 @@
 
 static const struct pci_device_id mei_txe_pci_tbl[] = {
 	{PCI_VDEVICE(INTEL, 0x0F18)}, /* Baytrail */
+	{PCI_VDEVICE(INTEL, 0x2298)}, /* Cherrytrail */
 
 	{0, }
 };