[MIPS] Pb1550 code style cleanup

Fix a few errors and warnings given by checkpatch.pl:

- macros with complex values not enclosed in parentheses;

- printk() without KERN_* facility level;

- unnecessary braces for single-statement block;

- using simple_strtol() where strict_strtol() could be used.

In addition to these changes, also do the following:

- replace numeric literals with the matching macros;

- properly indent the code and the array initializers;

- insert spaces between operator and its operands, also remove excess spaces
  there;

- remove space after the type cast's closing parenthesis;

- insert missing space before closing brace in the array initializers;

- replace spaces after the macro name with tabs in the #define directives, also
  sometimes insert space there for better looks;

- remove excess tabs after the macro name in the #define directives;

- fix typos/errors, capitalize acronyms, etc. in the comments;

- make the multi-line comment style consistent with the kernel style elsewhere
  by adding empty first line;

- update MontaVista copyright;

- remove Pete Popov's old email address...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/au1000/pb1550/Makefile

 #
-#  Copyright 2000 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#     	ppopov@mvista.com or source@mvista.com
+#  Copyright 2000, 2008 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc. <source@mvista.com>
 #
-# Makefile for the Alchemy Semiconductor PB1000 board.
+# Makefile for the Alchemy Semiconductor Pb1550 board.
 #
 
 lib-y := init.o board_setup.o irqmap.o

arch/mips/au1000/pb1550/board_setup.c

@@ -3,9 +3,8 @@
  * BRIEF MODULE DESCRIPTION
  *	Alchemy Pb1550 board setup.
  *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -35,15 +34,16 @@
 
 void board_reset(void)
 {
-    /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
-	au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C);
+	/* Hit BCSR.SYSTEM[RESET] */
+	au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
 }
 
 void __init board_setup(void)
 {
 	u32 pin_func;
 
-	/* Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
+	/*
+	 * Enable PSC1 SYNC for AC'97.  Normaly done in audio driver,
 	 * but it is board specific code, so put it here.
 	 */
 	pin_func = au_readl(SYS_PINFUNC);
@@ -51,8 +51,8 @@ void __init board_setup(void)
 	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
 	au_writel(pin_func, SYS_PINFUNC);
 
-	au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+	au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
 	au_sync();
 
-	printk("AMD Alchemy Pb1550 Board\n");
+	printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
 }

arch/mips/au1000/pb1550/init.c

 /*
  *
  * BRIEF MODULE DESCRIPTION
- *	PB1550 board setup
+ *	Pb1550 board setup
  *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -45,16 +44,15 @@ void __init prom_init(void)
 	unsigned char *memsize_str;
 	unsigned long memsize;
 
-	prom_argc = (int) fw_arg0;
-	prom_argv = (char **) fw_arg1;
-	prom_envp = (char **) fw_arg2;
+	prom_argc = (int)fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
 
 	prom_init_cmdline();
 	memsize_str = prom_getenv("memsize");
-	if (!memsize_str) {
+	if (!memsize_str)
 		memsize = 0x08000000;
-	} else {
-		memsize = simple_strtol(memsize_str, NULL, 0);
-	}
+	else
+		memsize = strict_strtol(memsize_str, 0, NULL);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }

arch/mips/au1000/pb1550/irqmap.c

 /*
  * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
+ *	Au1xx0 IRQ map table
  *
  * Copyright 2003 Embedded Edge, LLC
  *		dan@embeddededge.com
@@ -31,8 +31,8 @@
 #include <asm/mach-au1x00/au1000.h>
 
 char irq_tab_alchemy[][5] __initdata = {
- [12] =	{ -1, INTB, INTC, INTD, INTA},   /* IDSEL 12 - PCI slot 2 (left)  */
- [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
+	[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
+	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
 };
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {

include/asm-mips/mach-pb1x00/pb1550.h

@@ -130,11 +130,11 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
 #define BCSR_SYSTEM_RESET	0x8000
 
 #define PCMCIA_MAX_SOCK  1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
 
 /* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
-	((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
 
 #if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
 #define PB1550_BOTH_BANKS
@@ -144,7 +144,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
 #define PB1550_USER_ONLY
 #endif
 
-/* Timing values as described in databook, * ns value stripped of
+/*
+ * Timing values as described in databook, * ns value stripped of
  * lower 2 bits.
  * These defines are here rather than an SOC1550 generic file because
  * the parts chosen on another board may be different and may require
@@ -161,16 +162,16 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
 #define NAND_T_SU_SHIFT		8
 #define NAND_T_WH_SHIFT		12
 
-#define NAND_TIMING	((NAND_T_H   & 0xF)	<< NAND_T_H_SHIFT)   | \
+#define NAND_TIMING	(((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
 			 ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
 			 ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
-			((NAND_T_WH  & 0xF)	<< NAND_T_WH_SHIFT)
+			 ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
 
 #define NAND_CS 1
 
-/* should be done by yamon */
+/* Should be done by YAMON */
 #define NAND_STCFG	0x00400005 /* 8-bit NAND */
-#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
+#define NAND_STTIME	0x00007774 /* valid for 396 MHz SD=2 only */
 #define NAND_STADDR	0x12000FFF /* physical address 0x20000000 */
 
 #endif /* __ASM_PB1550_H */