Commit 6bcb00f6 authored by Sara Sharon's avatar Sara Sharon Committed by Emmanuel Grumbach

iwlwifi: mvm: remove IWL_UCODE_TLV_API_BASIC_DWELL

All the supported firmwares support this API.
This includes removing dwell per band, as band is no longer a factor
in calculating the dwell. Only basic dwell is used and FW will calculate
the actual dwell time.
Signed-off-by: default avatarSara Sharon <sara.sharon@intel.com>
Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
parent 30f27df9
......@@ -247,9 +247,6 @@ typedef unsigned int __bitwise__ iwl_ucode_tlv_api_t;
* @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
* IWL_UCODE_TLV_API_HDC_PHASE_0: ucode supports finer configuration of LTR
* @IWL_UCODE_TLV_API_TX_POWER_DEV: new API for tx power.
* @IWL_UCODE_TLV_API_BASIC_DWELL: use only basic dwell time in scan command,
* regardless of the band or the number of the probes. FW will calculate
* the actual dwell time.
* @IWL_UCODE_TLV_API_SCD_CFG: This firmware can configure the scheduler
* through the dedicated host command.
* @IWL_UCODE_TLV_API_SINGLE_SCAN_EBS: EBS is supported for single scans too.
......@@ -266,7 +263,6 @@ enum iwl_ucode_tlv_api {
IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = (__force iwl_ucode_tlv_api_t)9,
IWL_UCODE_TLV_API_HDC_PHASE_0 = (__force iwl_ucode_tlv_api_t)10,
IWL_UCODE_TLV_API_TX_POWER_DEV = (__force iwl_ucode_tlv_api_t)11,
IWL_UCODE_TLV_API_BASIC_DWELL = (__force iwl_ucode_tlv_api_t)13,
IWL_UCODE_TLV_API_SCD_CFG = (__force iwl_ucode_tlv_api_t)15,
IWL_UCODE_TLV_API_SINGLE_SCAN_EBS = (__force iwl_ucode_tlv_api_t)16,
IWL_UCODE_TLV_API_ASYNC_DTM = (__force iwl_ucode_tlv_api_t)17,
......
......@@ -90,11 +90,9 @@ struct iwl_mvm_scan_params {
int n_match_sets;
struct iwl_scan_probe_req preq;
struct cfg80211_match_set *match_sets;
struct _dwell {
u16 passive;
u16 active;
u16 fragmented;
} dwell[IEEE80211_NUM_BANDS];
u16 passive_dwell;
u16 active_dwell;
u16 fragmented_dwell;
struct {
u8 iterations;
u8 full_scan_mul; /* not used for UMAC */
......@@ -147,34 +145,6 @@ iwl_mvm_scan_rate_n_flags(struct iwl_mvm *mvm, enum ieee80211_band band,
return cpu_to_le32(IWL_RATE_6M_PLCP | tx_ant);
}
/*
* If req->n_ssids > 0, it means we should do an active scan.
* In case of active scan w/o directed scan, we receive a zero-length SSID
* just to notify that this scan is active and not passive.
* In order to notify the FW of the number of SSIDs we wish to scan (including
* the zero-length one), we need to set the corresponding bits in chan->type,
* one for each SSID, and set the active bit (first). If the first SSID is
* already included in the probe template, so we need to set only
* req->n_ssids - 1 bits in addition to the first bit.
*/
static u16 iwl_mvm_get_active_dwell(struct iwl_mvm *mvm,
enum ieee80211_band band, int n_ssids)
{
if (fw_has_api(&mvm->fw->ucode_capa, IWL_UCODE_TLV_API_BASIC_DWELL))
return 10;
if (band == IEEE80211_BAND_2GHZ)
return 20 + 3 * (n_ssids + 1);
return 10 + 2 * (n_ssids + 1);
}
static u16 iwl_mvm_get_passive_dwell(struct iwl_mvm *mvm,
enum ieee80211_band band)
{
if (fw_has_api(&mvm->fw->ucode_capa, IWL_UCODE_TLV_API_BASIC_DWELL))
return 110;
return band == IEEE80211_BAND_2GHZ ? 100 + 20 : 100 + 10;
}
static void iwl_mvm_scan_condition_iterator(void *data, u8 *mac,
struct ieee80211_vif *vif)
{
......@@ -191,7 +161,6 @@ static void iwl_mvm_scan_calc_dwell(struct iwl_mvm *mvm,
struct iwl_mvm_scan_params *params)
{
int global_cnt = 0;
enum ieee80211_band band;
u8 frag_passive_dwell = 0;
ieee80211_iterate_active_interfaces_atomic(mvm->hw,
......@@ -227,14 +196,10 @@ static void iwl_mvm_scan_calc_dwell(struct iwl_mvm *mvm,
/*
* P2P device scan should not be fragmented to avoid negative
* impact on P2P device discovery. Configure max_out_time to be
* equal to dwell time on passive channel. Take a longest
* possible value, one that corresponds to 2GHz band
* equal to dwell time on passive channel.
*/
if (vif->type == NL80211_IFTYPE_P2P_DEVICE) {
u32 passive_dwell =
iwl_mvm_get_passive_dwell(mvm,
IEEE80211_BAND_2GHZ);
params->max_out_time = passive_dwell;
params->max_out_time = 120;
} else {
params->passive_fragmented = true;
}
......@@ -246,30 +211,21 @@ static void iwl_mvm_scan_calc_dwell(struct iwl_mvm *mvm,
not_bound:
for (band = IEEE80211_BAND_2GHZ; band < IEEE80211_NUM_BANDS; band++) {
if (params->passive_fragmented)
params->dwell[band].fragmented = frag_passive_dwell;
params->fragmented_dwell = frag_passive_dwell;
/*
* use only basic dwell time in scan command, regardless of the band or
* the number of the probes. FW will calculate the actual dwell time.
*/
params->passive_dwell = 110;
params->active_dwell = 10;
params->dwell[band].passive = iwl_mvm_get_passive_dwell(mvm,
band);
params->dwell[band].active =
iwl_mvm_get_active_dwell(mvm, band, params->n_ssids);
}
IWL_DEBUG_SCAN(mvm,
"scan parameters: max_out_time %d, suspend_time %d, passive_fragmented %d\n",
params->max_out_time, params->suspend_time,
params->passive_fragmented);
IWL_DEBUG_SCAN(mvm,
"dwell[IEEE80211_BAND_2GHZ]: passive %d, active %d, fragmented %d\n",
params->dwell[IEEE80211_BAND_2GHZ].passive,
params->dwell[IEEE80211_BAND_2GHZ].active,
params->dwell[IEEE80211_BAND_2GHZ].fragmented);
IWL_DEBUG_SCAN(mvm,
"dwell[IEEE80211_BAND_5GHZ]: passive %d, active %d, fragmented %d\n",
params->dwell[IEEE80211_BAND_5GHZ].passive,
params->dwell[IEEE80211_BAND_5GHZ].active,
params->dwell[IEEE80211_BAND_5GHZ].fragmented);
}
static inline bool iwl_mvm_rrm_scan_needed(struct iwl_mvm *mvm)
......@@ -743,11 +699,10 @@ static void iwl_mvm_scan_lmac_dwell(struct iwl_mvm *mvm,
struct iwl_scan_req_lmac *cmd,
struct iwl_mvm_scan_params *params)
{
cmd->active_dwell = params->dwell[IEEE80211_BAND_2GHZ].active;
cmd->passive_dwell = params->dwell[IEEE80211_BAND_2GHZ].passive;
cmd->active_dwell = params->active_dwell;
cmd->passive_dwell = params->passive_dwell;
if (params->passive_fragmented)
cmd->fragmented_dwell =
params->dwell[IEEE80211_BAND_2GHZ].fragmented;
cmd->fragmented_dwell = params->fragmented_dwell;
cmd->max_out_time = cpu_to_le32(params->max_out_time);
cmd->suspend_time = cpu_to_le32(params->suspend_time);
cmd->scan_prio = iwl_mvm_scan_priority(mvm, IWL_SCAN_PRIORITY_EXT_6);
......@@ -1005,11 +960,10 @@ static void iwl_mvm_scan_umac_dwell(struct iwl_mvm *mvm,
struct iwl_scan_req_umac *cmd,
struct iwl_mvm_scan_params *params)
{
cmd->active_dwell = params->dwell[IEEE80211_BAND_2GHZ].active;
cmd->passive_dwell = params->dwell[IEEE80211_BAND_2GHZ].passive;
cmd->active_dwell = params->active_dwell;
cmd->passive_dwell = params->passive_dwell;
if (params->passive_fragmented)
cmd->fragmented_dwell =
params->dwell[IEEE80211_BAND_2GHZ].fragmented;
cmd->fragmented_dwell = params->fragmented_dwell;
cmd->max_out_time = cpu_to_le32(params->max_out_time);
cmd->suspend_time = cpu_to_le32(params->suspend_time);
cmd->scan_priority =
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment