Skip to content

L
linux
Commit 6c0514dd authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'blackfin-for-linus' of... 

Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux

Pull blackfin updates from Steven Miao:
 "Blackfin gpio changes, add adi pinctrl driver, and bug fixes"

* tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux:
  blackfin: fix build warning for unused variable
  smp: bf561: and smb_wmb()/smp_rmb() at ipi send/receive
  pm: use GFP_ATOMIC when pm core call this function
  blackfin: serial: Add serial port_fer and port_mux early platform resources.
  blackfin: pinctrl-adi2: code cleanup after using pinctrl-adi2
  blackfin: adi gpio driver and pinctrl driver support
  bf609: update default config for spi
  Blackfin: bfin_gpio: Use proper mask for comparing pfunc
parents 98d38dd2 36855dcf
Hide whitespace changes
Inline Side-by-side
Showing with 1025 additions and 710 deletions
arch/blackfin/configs/BF609-EZKIT_defconfig
View file @ 6c0514dd
...@@ -102,7 +102,7 @@ CONFIG_I2C_CHARDEV=y ...@@ -102,7 +102,7 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y CONFIG_SPI=y
CONFIG_SPI_BFIN6XX=y CONFIG_SPI_BFIN_V3=y
CONFIG_GPIOLIB=y CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
......
arch/blackfin/include/asm/irq.h
View file @ 6c0514dd
...@@ -23,8 +23,7 @@ ...@@ -23,8 +23,7 @@
/* /*
* pm save bfin pint registers * pm save bfin pint registers
*/ */
struct bfin_pm_pint_save { struct adi_pm_pint_save {
u32 mask_set;
u32 assign; u32 assign;
u32 edge_set; u32 edge_set;
u32 invert_set; u32 invert_set;
......
arch/blackfin/include/asm/irq_handler.h
View file @ 6c0514dd
...@@ -12,11 +12,11 @@ ...@@ -12,11 +12,11 @@
#include <mach/irq.h> #include <mach/irq.h>
/* init functions only */ /* init functions only */
extern int __init init_arch_irq(void); extern int init_arch_irq(void);
extern void init_exception_vectors(void); extern void init_exception_vectors(void);
extern void __init program_IAR(void); extern void program_IAR(void);
#ifdef init_mach_irq #ifdef init_mach_irq
extern void __init init_mach_irq(void); extern void init_mach_irq(void);
#else #else
# define init_mach_irq() # define init_mach_irq()
#endif #endif
......
arch/blackfin/kernel/bfin_gpio.c
View file @ 6c0514dd
...@@ -11,11 +11,8 @@ ...@@ -11,11 +11,8 @@
#include <linux/err.h> #include <linux/err.h>
#include <linux/proc_fs.h> #include <linux/proc_fs.h>
#include <linux/seq_file.h> #include <linux/seq_file.h>
#include <asm/blackfin.h> #include <linux/gpio.h>
#include <asm/gpio.h>
#include <asm/portmux.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <asm/irq_handler.h>
#if ANOMALY_05000311 || ANOMALY_05000323 #if ANOMALY_05000311 || ANOMALY_05000323
enum { enum {
...@@ -58,19 +55,6 @@ static struct gpio_port_t * const gpio_array[] = { ...@@ -58,19 +55,6 @@ static struct gpio_port_t * const gpio_array[] = {
(struct gpio_port_t *) FIO0_FLAG_D, (struct gpio_port_t *) FIO0_FLAG_D,
(struct gpio_port_t *) FIO1_FLAG_D, (struct gpio_port_t *) FIO1_FLAG_D,
(struct gpio_port_t *) FIO2_FLAG_D, (struct gpio_port_t *) FIO2_FLAG_D,
#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
(struct gpio_port_t *)PORTA_FER,
(struct gpio_port_t *)PORTB_FER,
(struct gpio_port_t *)PORTC_FER,
(struct gpio_port_t *)PORTD_FER,
(struct gpio_port_t *)PORTE_FER,
(struct gpio_port_t *)PORTF_FER,
(struct gpio_port_t *)PORTG_FER,
# if defined(CONFIG_BF54x)
(struct gpio_port_t *)PORTH_FER,
(struct gpio_port_t *)PORTI_FER,
(struct gpio_port_t *)PORTJ_FER,
# endif
#else #else
# error no gpio arrays defined # error no gpio arrays defined
#endif #endif
...@@ -169,12 +153,6 @@ DECLARE_RESERVED_MAP(gpio_irq, GPIO_BANK_NUM); ...@@ -169,12 +153,6 @@ DECLARE_RESERVED_MAP(gpio_irq, GPIO_BANK_NUM);
inline int check_gpio(unsigned gpio) inline int check_gpio(unsigned gpio)
{ {
#if defined(CONFIG_BF54x)
if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
|| gpio == GPIO_PH14 || gpio == GPIO_PH15
|| gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
return -EINVAL;
#endif
if (gpio >= MAX_BLACKFIN_GPIOS) if (gpio >= MAX_BLACKFIN_GPIOS)
return -EINVAL; return -EINVAL;
return 0; return 0;
...@@ -212,12 +190,6 @@ static void port_setup(unsigned gpio, unsigned short usage) ...@@ -212,12 +190,6 @@ static void port_setup(unsigned gpio, unsigned short usage)
else else
*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
SSYNC(); SSYNC();
#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
if (usage == GPIO_USAGE)
gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
else
gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
SSYNC();
#endif #endif
} }
...@@ -255,7 +227,7 @@ static int portmux_group_check(unsigned short per) ...@@ -255,7 +227,7 @@ static int portmux_group_check(unsigned short per)
u16 ident = P_IDENT(per); u16 ident = P_IDENT(per);
u16 function = P_FUNCT2MUX(per); u16 function = P_FUNCT2MUX(per);
s8 offset = port_mux[ident]; s8 offset = port_mux[ident];
u16 m, pmux, pfunc; u16 m, pmux, pfunc, mask;
if (offset < 0) if (offset < 0)
return 0; return 0;
...@@ -270,10 +242,12 @@ static int portmux_group_check(unsigned short per) ...@@ -270,10 +242,12 @@ static int portmux_group_check(unsigned short per)
continue; continue;
if (offset == 1) if (offset == 1)
pfunc = (pmux >> offset) & 3; mask = 3;
else else
pfunc = (pmux >> offset) & 1; mask = 1;
if (pfunc != function) {
pfunc = (pmux >> offset) & mask;
if (pfunc != (function & mask)) {
pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n", pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n",
ident, function, m, pfunc); ident, function, m, pfunc);
return -EINVAL; return -EINVAL;
...@@ -288,43 +262,21 @@ static void portmux_setup(unsigned short per) ...@@ -288,43 +262,21 @@ static void portmux_setup(unsigned short per)
u16 ident = P_IDENT(per); u16 ident = P_IDENT(per);
u16 function = P_FUNCT2MUX(per); u16 function = P_FUNCT2MUX(per);
s8 offset = port_mux[ident]; s8 offset = port_mux[ident];
u16 pmux; u16 pmux, mask;
if (offset == -1) if (offset == -1)
return; return;
pmux = bfin_read_PORT_MUX(); pmux = bfin_read_PORT_MUX();
if (offset != 1) if (offset == 1)
pmux &= ~(1 << offset); mask = 3;
else else
pmux &= ~(3 << 1); mask = 1;
pmux |= (function << offset);
bfin_write_PORT_MUX(pmux);
}
#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
inline void portmux_setup(unsigned short per)
{
u16 ident = P_IDENT(per);
u16 function = P_FUNCT2MUX(per);
u32 pmux;
pmux = gpio_array[gpio_bank(ident)]->port_mux; pmux &= ~(mask << offset);
pmux |= ((function & mask) << offset);
pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); bfin_write_PORT_MUX(pmux);
pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
gpio_array[gpio_bank(ident)]->port_mux = pmux;
}
inline u16 get_portmux(unsigned short per)
{
u16 ident = P_IDENT(per);
u32 pmux = gpio_array[gpio_bank(ident)]->port_mux;
return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
}
static int portmux_group_check(unsigned short per)
{
return 0;
} }
#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
static int portmux_group_check(unsigned short per) static int portmux_group_check(unsigned short per)
...@@ -379,7 +331,6 @@ static int portmux_group_check(unsigned short per) ...@@ -379,7 +331,6 @@ static int portmux_group_check(unsigned short per)
} }
#endif #endif
#if !(defined(CONFIG_BF54x) || defined(CONFIG_BF60x))
/*********************************************************** /***********************************************************
* *
* FUNCTIONS: Blackfin General Purpose Ports Access Functions * FUNCTIONS: Blackfin General Purpose Ports Access Functions
...@@ -572,7 +523,7 @@ static const unsigned int sic_iwr_irqs[] = { ...@@ -572,7 +523,7 @@ static const unsigned int sic_iwr_irqs[] = {
************************************************************* *************************************************************
* MODIFICATION HISTORY : * MODIFICATION HISTORY :
**************************************************************/ **************************************************************/
int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
{ {
unsigned long flags; unsigned long flags;
...@@ -591,7 +542,7 @@ int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) ...@@ -591,7 +542,7 @@ int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
return 0; return 0;
} }
int bfin_pm_standby_ctrl(unsigned ctrl) int bfin_gpio_pm_standby_ctrl(unsigned ctrl)
{ {
u16 bank, mask, i; u16 bank, mask, i;
...@@ -682,53 +633,6 @@ void bfin_gpio_pm_hibernate_restore(void) ...@@ -682,53 +633,6 @@ void bfin_gpio_pm_hibernate_restore(void)
#endif #endif
#else /* CONFIG_BF54x || CONFIG_BF60x */
#ifdef CONFIG_PM
int bfin_pm_standby_ctrl(unsigned ctrl)
{
return 0;
}
void bfin_gpio_pm_hibernate_suspend(void)
{
int i, bank;
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
bank = gpio_bank(i);
gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer;
gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux;
gpio_bank_saved[bank].data = gpio_array[bank]->data;
gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set;
}
}
void bfin_gpio_pm_hibernate_restore(void)
{
int i, bank;
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
bank = gpio_bank(i);
gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux;
gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer;
gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
gpio_array[bank]->data_set = gpio_bank_saved[bank].data
& gpio_bank_saved[bank].dir;
gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir;
}
}
#endif
unsigned short get_gpio_dir(unsigned gpio)
{
return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)));
}
EXPORT_SYMBOL(get_gpio_dir);
#endif /* CONFIG_BF54x || CONFIG_BF60x */
/*********************************************************** /***********************************************************
* *
...@@ -785,11 +689,7 @@ int peripheral_request(unsigned short per, const char *label) ...@@ -785,11 +689,7 @@ int peripheral_request(unsigned short per, const char *label)
* be requested and used by several drivers * be requested and used by several drivers
*/ */
#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
#else
if (!(per & P_MAYSHARE)) { if (!(per & P_MAYSHARE)) {
#endif
/* /*
* Allow that the identical pin function can * Allow that the identical pin function can
* be requested from the same driver twice * be requested from the same driver twice
...@@ -938,12 +838,9 @@ int bfin_gpio_request(unsigned gpio, const char *label) ...@@ -938,12 +838,9 @@ int bfin_gpio_request(unsigned gpio, const char *label)
if (unlikely(is_reserved(gpio_irq, gpio, 1))) { if (unlikely(is_reserved(gpio_irq, gpio, 1))) {
printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
" (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
} } else { /* Reset POLAR setting when acquiring a gpio for the first time */
#if !(defined(CONFIG_BF54x) || defined(CONFIG_BF60x))
else { /* Reset POLAR setting when acquiring a gpio for the first time */
set_gpio_polar(gpio, 0); set_gpio_polar(gpio, 0);
} }
#endif
reserve(gpio, gpio); reserve(gpio, gpio);
set_label(gpio, label); set_label(gpio, label);
...@@ -1112,11 +1009,7 @@ void bfin_gpio_irq_free(unsigned gpio) ...@@ -1112,11 +1009,7 @@ void bfin_gpio_irq_free(unsigned gpio)
static inline void __bfin_gpio_direction_input(unsigned gpio) static inline void __bfin_gpio_direction_input(unsigned gpio)
{ {
#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
#else
gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
#endif
gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
} }
...@@ -1140,17 +1033,7 @@ EXPORT_SYMBOL(bfin_gpio_direction_input); ...@@ -1140,17 +1033,7 @@ EXPORT_SYMBOL(bfin_gpio_direction_input);
void bfin_gpio_irq_prepare(unsigned gpio) void bfin_gpio_irq_prepare(unsigned gpio)
{ {
#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
unsigned long flags;
#endif
port_setup(gpio, GPIO_USAGE); port_setup(gpio, GPIO_USAGE);
#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
flags = hard_local_irq_save();
__bfin_gpio_direction_input(gpio);
hard_local_irq_restore(flags);
#endif
} }
void bfin_gpio_set_value(unsigned gpio, int arg) void bfin_gpio_set_value(unsigned gpio, int arg)
...@@ -1175,11 +1058,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value) ...@@ -1175,11 +1058,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value)
gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
gpio_set_value(gpio, value); gpio_set_value(gpio, value);
#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
#else
gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
#endif
AWA_DUMMY_READ(dir); AWA_DUMMY_READ(dir);
hard_local_irq_restore(flags); hard_local_irq_restore(flags);
...@@ -1190,9 +1069,6 @@ EXPORT_SYMBOL(bfin_gpio_direction_output); ...@@ -1190,9 +1069,6 @@ EXPORT_SYMBOL(bfin_gpio_direction_output);
int bfin_gpio_get_value(unsigned gpio) int bfin_gpio_get_value(unsigned gpio)
{ {
#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
#else
unsigned long flags; unsigned long flags;
if (unlikely(get_gpio_edge(gpio))) { if (unlikely(get_gpio_edge(gpio))) {
...@@ -1205,7 +1081,6 @@ int bfin_gpio_get_value(unsigned gpio) ...@@ -1205,7 +1081,6 @@ int bfin_gpio_get_value(unsigned gpio)
return ret; return ret;
} else } else
return get_gpio_data(gpio); return get_gpio_data(gpio);
#endif
} }
EXPORT_SYMBOL(bfin_gpio_get_value); EXPORT_SYMBOL(bfin_gpio_get_value);
......
arch/blackfin/mach-bf548/Kconfig
View file @ 6c0514dd
...@@ -377,40 +377,6 @@ config IRQ_PINT3 ...@@ -377,40 +377,6 @@ config IRQ_PINT3
endmenu endmenu
comment "Pin Interrupt to Port Assignment"
menu "Assignment"
config PINTx_REASSIGN
bool "Reprogram PINT Assignment"
default y
help
The interrupt assignment registers controls the pin-to-interrupt
assignment in a byte-wide manner. Each option allows you to select
a set of pins (High/Low Byte) of an specific Port being mapped
to one of the four PIN Interrupts IRQ_PINTx.
You shouldn't change any of these unless you know exactly what you're doing.
Please consult the Blackfin BF54x Processor Hardware Reference Manual.
config PINT0_ASSIGN
hex "PINT0_ASSIGN"
depends on PINTx_REASSIGN
default 0x00000101
config PINT1_ASSIGN
hex "PINT1_ASSIGN"
depends on PINTx_REASSIGN
default 0x01010000
config PINT2_ASSIGN
hex "PINT2_ASSIGN"
depends on PINTx_REASSIGN
default 0x07000101
config PINT3_ASSIGN
hex "PINT3_ASSIGN"
depends on PINTx_REASSIGN
default 0x02020303
endmenu
endmenu endmenu
endif endif
arch/blackfin/mach-bf548/boards/ezkit.c
View file @ 6c0514dd
...@@ -17,6 +17,9 @@ ...@@ -17,6 +17,9 @@
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/usb/musb.h> #include <linux/usb/musb.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_data/pinctrl-adi2.h>
#include <asm/bfin5xx_spi.h> #include <asm/bfin5xx_spi.h>
#include <asm/dma.h> #include <asm/dma.h>
#include <asm/gpio.h> #include <asm/gpio.h>
...@@ -241,6 +244,13 @@ static struct resource bfin_uart0_resources[] = { ...@@ -241,6 +244,13 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_RBR+2, .end = UART0_RBR+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
#ifdef CONFIG_EARLY_PRINTK
{
.start = PORTE_FER,
.end = PORTE_FER+2,
.flags = IORESOURCE_REG,
},
#endif
{ {
.start = IRQ_UART0_TX, .start = IRQ_UART0_TX,
.end = IRQ_UART0_TX, .end = IRQ_UART0_TX,
...@@ -289,6 +299,13 @@ static struct resource bfin_uart1_resources[] = { ...@@ -289,6 +299,13 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_RBR+2, .end = UART1_RBR+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
#ifdef CONFIG_EARLY_PRINTK
{
.start = PORTH_FER,
.end = PORTH_FER+2,
.flags = IORESOURCE_REG,
},
#endif
{ {
.start = IRQ_UART1_TX, .start = IRQ_UART1_TX,
.end = IRQ_UART1_TX, .end = IRQ_UART1_TX,
...@@ -353,6 +370,13 @@ static struct resource bfin_uart2_resources[] = { ...@@ -353,6 +370,13 @@ static struct resource bfin_uart2_resources[] = {
.end = UART2_RBR+2, .end = UART2_RBR+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
#ifdef CONFIG_EARLY_PRINTK
{
.start = PORTB_FER,
.end = PORTB_FER+2,
.flags = IORESOURCE_REG,
},
#endif
{ {
.start = IRQ_UART2_TX, .start = IRQ_UART2_TX,
.end = IRQ_UART2_TX, .end = IRQ_UART2_TX,
...@@ -401,6 +425,13 @@ static struct resource bfin_uart3_resources[] = { ...@@ -401,6 +425,13 @@ static struct resource bfin_uart3_resources[] = {
.end = UART3_RBR+2, .end = UART3_RBR+2,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
#ifdef CONFIG_EARLY_PRINTK
{
.start = PORTB_FER,
.end = PORTB_FER+2,
.flags = IORESOURCE_REG,
},
#endif
{ {
.start = IRQ_UART3_TX, .start = IRQ_UART3_TX,
.end = IRQ_UART3_TX, .end = IRQ_UART3_TX,
...@@ -1058,6 +1089,411 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { ...@@ -1058,6 +1089,411 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
}; };
#endif #endif
#ifdef CONFIG_PINCTRL_ADI2
# define ADI_PINT_DEVNAME "adi-gpio-pint"
# define ADI_GPIO_DEVNAME "adi-gpio"
# define ADI_PINCTRL_DEVNAME "pinctrl-adi2"
static struct platform_device bfin_pinctrl_device = {
.name = ADI_PINCTRL_DEVNAME,
.id = 0,
};
static struct resource bfin_pint0_resources[] = {
{
.start = PINT0_MASK_SET,
.end = PINT0_LATCH + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PINT0,
.end = IRQ_PINT0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_pint0_device = {
.name = ADI_PINT_DEVNAME,
.id = 0,
.num_resources = ARRAY_SIZE(bfin_pint0_resources),
.resource = bfin_pint0_resources,
};
static struct resource bfin_pint1_resources[] = {
{
.start = PINT1_MASK_SET,
.end = PINT1_LATCH + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PINT1,
.end = IRQ_PINT1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_pint1_device = {
.name = ADI_PINT_DEVNAME,
.id = 1,
.num_resources = ARRAY_SIZE(bfin_pint1_resources),
.resource = bfin_pint1_resources,
};
static struct resource bfin_pint2_resources[] = {
{
.start = PINT2_MASK_SET,
.end = PINT2_LATCH + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PINT2,
.end = IRQ_PINT2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_pint2_device = {
.name = ADI_PINT_DEVNAME,
.id = 2,
.num_resources = ARRAY_SIZE(bfin_pint2_resources),
.resource = bfin_pint2_resources,
};
static struct resource bfin_pint3_resources[] = {
{
.start = PINT3_MASK_SET,
.end = PINT3_LATCH + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PINT3,
.end = IRQ_PINT3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_pint3_device = {
.name = ADI_PINT_DEVNAME,
.id = 3,
.num_resources = ARRAY_SIZE(bfin_pint3_resources),
.resource = bfin_pint3_resources,
};
static struct resource bfin_gpa_resources[] = {
{
.start = PORTA_FER,
.end = PORTA_MUX + 3,
.flags = IORESOURCE_MEM,
},
{ /* optional */
.start = IRQ_PA0,
.end = IRQ_PA0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = {
.port_gpio_base = GPIO_PA0, /* Optional */
.port_pin_base = GPIO_PA0,
.port_width = GPIO_BANKSIZE,
.pint_id = 0, /* PINT0 */
.pint_assign = true, /* PINT upper 16 bit */
.pint_map = 0, /* mapping mask in PINT */
};
static struct platform_device bfin_gpa_device = {
.name = ADI_GPIO_DEVNAME,
.id = 0,
.num_resources = ARRAY_SIZE(bfin_gpa_resources),
.resource = bfin_gpa_resources,
.dev = {
.platform_data = &bfin_gpa_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpb_resources[] = {
{
.start = PORTB_FER,
.end = PORTB_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PB0,
.end = IRQ_PB0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = {
.port_gpio_base = GPIO_PB0,
.port_pin_base = GPIO_PB0,
.port_width = 15,
.pint_id = 0,
.pint_assign = true,
.pint_map = 1,
};
static struct platform_device bfin_gpb_device = {
.name = ADI_GPIO_DEVNAME,
.id = 1,
.num_resources = ARRAY_SIZE(bfin_gpb_resources),
.resource = bfin_gpb_resources,
.dev = {
.platform_data = &bfin_gpb_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpc_resources[] = {
{
.start = PORTC_FER,
.end = PORTC_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PC0,
.end = IRQ_PC0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = {
.port_gpio_base = GPIO_PC0,
.port_pin_base = GPIO_PC0,
.port_width = 14,
.pint_id = 2,
.pint_assign = true,
.pint_map = 0,
};
static struct platform_device bfin_gpc_device = {
.name = ADI_GPIO_DEVNAME,
.id = 2,
.num_resources = ARRAY_SIZE(bfin_gpc_resources),
.resource = bfin_gpc_resources,
.dev = {
.platform_data = &bfin_gpc_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpd_resources[] = {
{
.start = PORTD_FER,
.end = PORTD_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PD0,
.end = IRQ_PD0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = {
.port_gpio_base = GPIO_PD0,
.port_pin_base = GPIO_PD0,
.port_width = GPIO_BANKSIZE,
.pint_id = 2,
.pint_assign = false,
.pint_map = 1,
};
static struct platform_device bfin_gpd_device = {
.name = ADI_GPIO_DEVNAME,
.id = 3,
.num_resources = ARRAY_SIZE(bfin_gpd_resources),
.resource = bfin_gpd_resources,
.dev = {
.platform_data = &bfin_gpd_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpe_resources[] = {
{
.start = PORTE_FER,
.end = PORTE_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PE0,
.end = IRQ_PE0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = {
.port_gpio_base = GPIO_PE0,
.port_pin_base = GPIO_PE0,
.port_width = GPIO_BANKSIZE,
.pint_id = 3,
.pint_assign = true,
.pint_map = 2,
};
static struct platform_device bfin_gpe_device = {
.name = ADI_GPIO_DEVNAME,
.id = 4,
.num_resources = ARRAY_SIZE(bfin_gpe_resources),
.resource = bfin_gpe_resources,
.dev = {
.platform_data = &bfin_gpe_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpf_resources[] = {
{
.start = PORTF_FER,
.end = PORTF_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PF0,
.end = IRQ_PF0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = {
.port_gpio_base = GPIO_PF0,
.port_pin_base = GPIO_PF0,
.port_width = GPIO_BANKSIZE,
.pint_id = 3,
.pint_assign = false,
.pint_map = 3,
};
static struct platform_device bfin_gpf_device = {
.name = ADI_GPIO_DEVNAME,
.id = 5,
.num_resources = ARRAY_SIZE(bfin_gpf_resources),
.resource = bfin_gpf_resources,
.dev = {
.platform_data = &bfin_gpf_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpg_resources[] = {
{
.start = PORTG_FER,
.end = PORTG_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PG0,
.end = IRQ_PG0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = {
.port_gpio_base = GPIO_PG0,
.port_pin_base = GPIO_PG0,
.port_width = GPIO_BANKSIZE,
.pint_id = -1,
};
static struct platform_device bfin_gpg_device = {
.name = ADI_GPIO_DEVNAME,
.id = 6,
.num_resources = ARRAY_SIZE(bfin_gpg_resources),
.resource = bfin_gpg_resources,
.dev = {
.platform_data = &bfin_gpg_pdata, /* Passed to driver */
},
};
static struct resource bfin_gph_resources[] = {
{
.start = PORTH_FER,
.end = PORTH_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PH0,
.end = IRQ_PH0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gph_pdata = {
.port_gpio_base = GPIO_PH0,
.port_pin_base = GPIO_PH0,
.port_width = 14,
.pint_id = -1,
};
static struct platform_device bfin_gph_device = {
.name = ADI_GPIO_DEVNAME,
.id = 7,
.num_resources = ARRAY_SIZE(bfin_gph_resources),
.resource = bfin_gph_resources,
.dev = {
.platform_data = &bfin_gph_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpi_resources[] = {
{
.start = PORTI_FER,
.end = PORTI_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PI0,
.end = IRQ_PI0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpi_pdata = {
.port_gpio_base = GPIO_PI0,
.port_pin_base = GPIO_PI0,
.port_width = GPIO_BANKSIZE,
.pint_id = -1,
};
static struct platform_device bfin_gpi_device = {
.name = ADI_GPIO_DEVNAME,
.id = 8,
.num_resources = ARRAY_SIZE(bfin_gpi_resources),
.resource = bfin_gpi_resources,
.dev = {
.platform_data = &bfin_gpi_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpj_resources[] = {
{
.start = PORTJ_FER,
.end = PORTJ_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PJ0,
.end = IRQ_PJ0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpj_pdata = {
.port_gpio_base = GPIO_PJ0,
.port_pin_base = GPIO_PJ0,
.port_width = 14,
.pint_id = -1,
};
static struct platform_device bfin_gpj_device = {
.name = ADI_GPIO_DEVNAME,
.id = 9,
.num_resources = ARRAY_SIZE(bfin_gpj_resources),
.resource = bfin_gpj_resources,
.dev = {
.platform_data = &bfin_gpj_pdata, /* Passed to driver */
},
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = { static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \ #if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE) || defined(CONFIG_MTD_M25P80_MODULE)
...@@ -1066,7 +1502,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -1066,7 +1502,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.modalias = "m25p80", /* Name of spi_driver for this device */ .modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, /* Framework bus number */ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* SPI_SSEL1*/ .chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1*/
.platform_data = &bfin_spi_flash_data, .platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info, .controller_data = &spi_flash_chip_info,
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
...@@ -1078,7 +1514,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -1078,7 +1514,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.modalias = "ad183x", .modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 1, .bus_num = 1,
.chip_select = 4, .chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */
}, },
#endif #endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
...@@ -1088,7 +1524,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -1088,7 +1524,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */ .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = 2, .chip_select = MAX_CTRL_CS + GPIO_PE5, /* SPI_SSEL2 */
}, },
#endif #endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
...@@ -1096,7 +1532,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -1096,7 +1532,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.modalias = "spidev", .modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = 1, .chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1 */
}, },
#endif #endif
#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
...@@ -1106,7 +1542,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -1106,7 +1542,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.irq = IRQ_PC5, .irq = IRQ_PC5,
.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 1, .bus_num = 1,
.chip_select = 2, .chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
...@@ -1152,7 +1588,7 @@ static struct resource bfin_spi1_resource[] = { ...@@ -1152,7 +1588,7 @@ static struct resource bfin_spi1_resource[] = {
/* SPI controller data */ /* SPI controller data */
static struct bfin5xx_spi_master bf54x_spi_master_info0 = { static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
.num_chipselect = 4, .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.enable_dma = 1, /* master has the ability to do dma transfer */ .enable_dma = 1, /* master has the ability to do dma transfer */
.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
}; };
...@@ -1168,7 +1604,7 @@ static struct platform_device bf54x_spi_master0 = { ...@@ -1168,7 +1604,7 @@ static struct platform_device bf54x_spi_master0 = {
}; };
static struct bfin5xx_spi_master bf54x_spi_master_info1 = { static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
.num_chipselect = 4, .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.enable_dma = 1, /* master has the ability to do dma transfer */ .enable_dma = 1, /* master has the ability to do dma transfer */
.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
}; };
...@@ -1508,6 +1944,23 @@ static struct platform_device bfin_ac97 = { ...@@ -1508,6 +1944,23 @@ static struct platform_device bfin_ac97 = {
static struct platform_device *ezkit_devices[] __initdata = { static struct platform_device *ezkit_devices[] __initdata = {
&bfin_dpmc, &bfin_dpmc,
#if defined(CONFIG_PINCTRL_ADI2)
&bfin_pinctrl_device,
&bfin_pint0_device,
&bfin_pint1_device,
&bfin_pint2_device,
&bfin_pint3_device,
&bfin_gpa_device,
&bfin_gpb_device,
&bfin_gpc_device,
&bfin_gpd_device,
&bfin_gpe_device,
&bfin_gpf_device,
&bfin_gpg_device,
&bfin_gph_device,
&bfin_gpi_device,
&bfin_gpj_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device, &rtc_device,
...@@ -1644,10 +2097,66 @@ static struct platform_device *ezkit_devices[] __initdata = { ...@@ -1644,10 +2097,66 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif #endif
}; };
/* Pin control settings */
static struct pinctrl_map __initdata bfin_pinmux_map[] = {
/* per-device maps */
PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0", "pinctrl-adi2.0", NULL, "uart0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1"),
#ifdef CONFIG_BFIN_UART1_CTSRTS
PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1_ctsrts"),
#endif
PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.2", "pinctrl-adi2.0", NULL, "uart2"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3", "pinctrl-adi2.0", NULL, "uart3"),
#ifdef CONFIG_BFIN_UART3_CTSRTS
PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3", "pinctrl-adi2.0", NULL, "uart3_ctsrts"),
#endif
PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0", "pinctrl-adi2.0", NULL, "uart0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.2", "pinctrl-adi2.0", NULL, "uart2"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.3", "pinctrl-adi2.0", NULL, "uart3"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.0", "pinctrl-adi2.0", NULL, "spi0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.1", "pinctrl-adi2.0", NULL, "spi1"),
PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"),
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"),
#endif
PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.1", "pinctrl-adi2.0", NULL, "can1"),
PIN_MAP_MUX_GROUP_DEFAULT("bf54x-lq043", "pinctrl-adi2.0", NULL, "ppi0_24b"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.0", "pinctrl-adi2.0", NULL, "sport0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1", "pinctrl-adi2.0", NULL, "sport1"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1", "pinctrl-adi2.0", NULL, "sport1"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.1", "pinctrl-adi2.0", NULL, "sport1"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2", "pinctrl-adi2.0", NULL, "sport2"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2", "pinctrl-adi2.0", NULL, "sport2"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.2", "pinctrl-adi2.0", NULL, "sport2"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.3", "pinctrl-adi2.0", NULL, "sport3"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.3", "pinctrl-adi2.0", NULL, "sport3"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.3", "pinctrl-adi2.0", NULL, "sport3"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.0", "pinctrl-adi2.0", NULL, "sport0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.1", "pinctrl-adi2.0", NULL, "sport1"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.2", "pinctrl-adi2.0", NULL, "sport2"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.3", "pinctrl-adi2.0", NULL, "sport3"),
PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x", "pinctrl-adi2.0", NULL, "atapi"),
#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT
PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x", "pinctrl-adi2.0", NULL, "atapi_alter"),
#endif
PIN_MAP_MUX_GROUP_DEFAULT("bf5xx-nand.0", "pinctrl-adi2.0", NULL, "nfc0"),
PIN_MAP_MUX_GROUP_DEFAULT("bf54x-keys", "pinctrl-adi2.0", NULL, "keys_4x4"),
};
static int __init ezkit_init(void) static int __init ezkit_init(void)
{ {
printk(KERN_INFO "%s(): registering device resources\n", __func__); printk(KERN_INFO "%s(): registering device resources\n", __func__);
/* Initialize pinmuxing */
pinctrl_register_mappings(bfin_pinmux_map,
ARRAY_SIZE(bfin_pinmux_map));
i2c_register_board_info(0, bfin_i2c_board_info0, i2c_register_board_info(0, bfin_i2c_board_info0,
ARRAY_SIZE(bfin_i2c_board_info0)); ARRAY_SIZE(bfin_i2c_board_info0));
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
...@@ -1679,21 +2188,6 @@ static struct platform_device *ezkit_early_devices[] __initdata = { ...@@ -1679,21 +2188,6 @@ static struct platform_device *ezkit_early_devices[] __initdata = {
&bfin_uart3_device, &bfin_uart3_device,
#endif #endif
#endif #endif
#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
&bfin_sport1_uart_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
&bfin_sport2_uart_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
&bfin_sport3_uart_device,
#endif
#endif
}; };
void __init native_machine_early_platform_add_devices(void) void __init native_machine_early_platform_add_devices(void)
......
arch/blackfin/mach-bf548/include/mach/gpio.h
View file @ 6c0514dd
...@@ -194,14 +194,6 @@ struct gpio_port_t { ...@@ -194,14 +194,6 @@ struct gpio_port_t {
unsigned int port_mux; unsigned int port_mux;
}; };
struct gpio_port_s {
unsigned short fer;
unsigned short data;
unsigned short dir;
unsigned short inen;
unsigned int mux;
};
#endif #endif
#include <mach-common/ports-a.h> #include <mach-common/ports-a.h>
......
arch/blackfin/mach-bf548/include/mach/irq.h
View file @ 6c0514dd
...@@ -433,7 +433,7 @@ ...@@ -433,7 +433,7 @@
#include <linux/types.h> #include <linux/types.h>
/* /*
* bfin pint registers layout * gpio pint registers layout
*/ */
struct bfin_pint_regs { struct bfin_pint_regs {
u32 mask_set; u32 mask_set;
......
arch/blackfin/mach-bf609/Kconfig
View file @ 6c0514dd
...@@ -9,48 +9,6 @@ source "arch/blackfin/mach-bf609/boards/Kconfig" ...@@ -9,48 +9,6 @@ source "arch/blackfin/mach-bf609/boards/Kconfig"
menu "BF609 Specific Configuration" menu "BF609 Specific Configuration"
comment "Pin Interrupt to Port Assignment"
menu "Assignment"
config PINTx_REASSIGN
bool "Reprogram PINT Assignment"
default y
help
The interrupt assignment registers controls the pin-to-interrupt
assignment in a byte-wide manner. Each option allows you to select
a set of pins (High/Low Byte) of an specific Port being mapped
to one of the four PIN Interrupts IRQ_PINTx.
You shouldn't change any of these unless you know exactly what you're doing.
Please consult the Blackfin BF60x Processor Hardware Reference Manual.
config PINT0_ASSIGN
hex "PINT0_ASSIGN"
depends on PINTx_REASSIGN
default 0x00000101
config PINT1_ASSIGN
hex "PINT1_ASSIGN"
depends on PINTx_REASSIGN
default 0x00000101
config PINT2_ASSIGN
hex "PINT2_ASSIGN"
depends on PINTx_REASSIGN
default 0x00000101
config PINT3_ASSIGN
hex "PINT3_ASSIGN"
depends on PINTx_REASSIGN
default 0x00000101
config PINT4_ASSIGN
hex "PINT3_ASSIGN"
depends on PINTx_REASSIGN
default 0x00000101
config PINT5_ASSIGN
hex "PINT3_ASSIGN"
depends on PINTx_REASSIGN
default 0x00000101
endmenu
config SEC_IRQ_PRIORITY_LEVELS config SEC_IRQ_PRIORITY_LEVELS
int "SEC interrupt priority levels" int "SEC interrupt priority levels"
default 7 default 7
......
arch/blackfin/mach-bf609/boards/ezkit.c
View file @ 6c0514dd
...@@ -17,6 +17,9 @@ ...@@ -17,6 +17,9 @@
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/usb/musb.h> #include <linux/usb/musb.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_data/pinctrl-adi2.h>
#include <asm/bfin_spi3.h> #include <asm/bfin_spi3.h>
#include <asm/dma.h> #include <asm/dma.h>
#include <asm/gpio.h> #include <asm/gpio.h>
...@@ -106,8 +109,6 @@ static struct platform_device bfin_rotary_device = { ...@@ -106,8 +109,6 @@ static struct platform_device bfin_rotary_device = {
#include <linux/stmmac.h> #include <linux/stmmac.h>
#include <linux/phy.h> #include <linux/phy.h>
static unsigned short pins[] = P_RMII0;
static struct stmmac_mdio_bus_data phy_private_data = { static struct stmmac_mdio_bus_data phy_private_data = {
.phy_mask = 1, .phy_mask = 1,
}; };
...@@ -212,6 +213,18 @@ static struct resource bfin_uart0_resources[] = { ...@@ -212,6 +213,18 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_RXDIV+4, .end = UART0_RXDIV+4,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
#ifdef CONFIG_EARLY_PRINTK
{
.start = PORTD_FER,
.end = PORTD_FER+2,
.flags = IORESOURCE_REG,
},
{
.start = PORTD_MUX,
.end = PORTD_MUX+3,
.flags = IORESOURCE_REG,
},
#endif
{ {
.start = IRQ_UART0_TX, .start = IRQ_UART0_TX,
.end = IRQ_UART0_TX, .end = IRQ_UART0_TX,
...@@ -276,6 +289,13 @@ static struct resource bfin_uart1_resources[] = { ...@@ -276,6 +289,13 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_RXDIV+4, .end = UART1_RXDIV+4,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, },
#ifdef CONFIG_EARLY_PRINTK
{
.start = PORTG_FER_SET,
.end = PORTG_FER_SET+2,
.flags = IORESOURCE_REG,
},
#endif
{ {
.start = IRQ_UART1_TX, .start = IRQ_UART1_TX,
.end = IRQ_UART1_TX, .end = IRQ_UART1_TX,
...@@ -674,17 +694,12 @@ static struct mtd_partition ezkit_partitions[] = { ...@@ -674,17 +694,12 @@ static struct mtd_partition ezkit_partitions[] = {
}, },
}; };
int bf609_nor_flash_init(struct platform_device *dev) int bf609_nor_flash_init(struct platform_device *pdev)
{ {
#define CONFIG_SMC_GCTL_VAL 0x00000010 #define CONFIG_SMC_GCTL_VAL 0x00000010
const unsigned short pins[] = {
P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
P_A22, P_A23, P_A24, P_A25, P_NORCK, 0,
};
peripheral_request_list(pins, "smc0");
if (!devm_pinctrl_get_select_default(&pdev->dev))
return -EBUSY;
bfin_write32(SMC_GCTL, CONFIG_SMC_GCTL_VAL); bfin_write32(SMC_GCTL, CONFIG_SMC_GCTL_VAL);
bfin_write32(SMC_B0CTL, 0x01002011); bfin_write32(SMC_B0CTL, 0x01002011);
bfin_write32(SMC_B0TIM, 0x08170977); bfin_write32(SMC_B0TIM, 0x08170977);
...@@ -692,16 +707,9 @@ int bf609_nor_flash_init(struct platform_device *dev) ...@@ -692,16 +707,9 @@ int bf609_nor_flash_init(struct platform_device *dev)
return 0; return 0;
} }
void bf609_nor_flash_exit(struct platform_device *dev) void bf609_nor_flash_exit(struct platform_device *pdev)
{ {
const unsigned short pins[] = { devm_pinctrl_put(pdev->dev.pins->p);
P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
P_A22, P_A23, P_A24, P_A25, P_NORCK, 0,
};
peripheral_free_list(pins);
bfin_write32(SMC_GCTL, 0); bfin_write32(SMC_GCTL, 0);
} }
...@@ -1319,6 +1327,356 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { ...@@ -1319,6 +1327,356 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
}; };
#endif #endif
#ifdef CONFIG_PINCTRL_ADI2
# define ADI_PINT_DEVNAME "adi-gpio-pint"
# define ADI_GPIO_DEVNAME "adi-gpio"
# define ADI_PINCTRL_DEVNAME "pinctrl-adi2"
static struct platform_device bfin_pinctrl_device = {
.name = ADI_PINCTRL_DEVNAME,
.id = 0,
};
static struct resource bfin_pint0_resources[] = {
{
.start = PINT0_MASK_SET,
.end = PINT0_LATCH + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PINT0,
.end = IRQ_PINT0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_pint0_device = {
.name = ADI_PINT_DEVNAME,
.id = 0,
.num_resources = ARRAY_SIZE(bfin_pint0_resources),
.resource = bfin_pint0_resources,
};
static struct resource bfin_pint1_resources[] = {
{
.start = PINT1_MASK_SET,
.end = PINT1_LATCH + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PINT1,
.end = IRQ_PINT1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_pint1_device = {
.name = ADI_PINT_DEVNAME,
.id = 1,
.num_resources = ARRAY_SIZE(bfin_pint1_resources),
.resource = bfin_pint1_resources,
};
static struct resource bfin_pint2_resources[] = {
{
.start = PINT2_MASK_SET,
.end = PINT2_LATCH + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PINT2,
.end = IRQ_PINT2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_pint2_device = {
.name = ADI_PINT_DEVNAME,
.id = 2,
.num_resources = ARRAY_SIZE(bfin_pint2_resources),
.resource = bfin_pint2_resources,
};
static struct resource bfin_pint3_resources[] = {
{
.start = PINT3_MASK_SET,
.end = PINT3_LATCH + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PINT3,
.end = IRQ_PINT3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_pint3_device = {
.name = ADI_PINT_DEVNAME,
.id = 3,
.num_resources = ARRAY_SIZE(bfin_pint3_resources),
.resource = bfin_pint3_resources,
};
static struct resource bfin_pint4_resources[] = {
{
.start = PINT4_MASK_SET,
.end = PINT4_LATCH + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PINT4,
.end = IRQ_PINT4,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_pint4_device = {
.name = ADI_PINT_DEVNAME,
.id = 4,
.num_resources = ARRAY_SIZE(bfin_pint4_resources),
.resource = bfin_pint4_resources,
};
static struct resource bfin_pint5_resources[] = {
{
.start = PINT5_MASK_SET,
.end = PINT5_LATCH + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PINT5,
.end = IRQ_PINT5,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_pint5_device = {
.name = ADI_PINT_DEVNAME,
.id = 5,
.num_resources = ARRAY_SIZE(bfin_pint5_resources),
.resource = bfin_pint5_resources,
};
static struct resource bfin_gpa_resources[] = {
{
.start = PORTA_FER,
.end = PORTA_MUX + 3,
.flags = IORESOURCE_MEM,
},
{ /* optional */
.start = IRQ_PA0,
.end = IRQ_PA0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = {
.port_pin_base = GPIO_PA0,
.port_width = GPIO_BANKSIZE,
.pint_id = 0, /* PINT0 */
.pint_assign = true, /* PINT upper 16 bit */
.pint_map = 0, /* mapping mask in PINT */
};
static struct platform_device bfin_gpa_device = {
.name = ADI_GPIO_DEVNAME,
.id = 0,
.num_resources = ARRAY_SIZE(bfin_gpa_resources),
.resource = bfin_gpa_resources,
.dev = {
.platform_data = &bfin_gpa_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpb_resources[] = {
{
.start = PORTB_FER,
.end = PORTB_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PB0,
.end = IRQ_PB0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = {
.port_pin_base = GPIO_PB0,
.port_width = GPIO_BANKSIZE,
.pint_id = 0,
.pint_assign = false,
.pint_map = 1,
};
static struct platform_device bfin_gpb_device = {
.name = ADI_GPIO_DEVNAME,
.id = 1,
.num_resources = ARRAY_SIZE(bfin_gpb_resources),
.resource = bfin_gpb_resources,
.dev = {
.platform_data = &bfin_gpb_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpc_resources[] = {
{
.start = PORTC_FER,
.end = PORTC_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PC0,
.end = IRQ_PC0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = {
.port_pin_base = GPIO_PC0,
.port_width = GPIO_BANKSIZE,
.pint_id = 1,
.pint_assign = false,
.pint_map = 1,
};
static struct platform_device bfin_gpc_device = {
.name = ADI_GPIO_DEVNAME,
.id = 2,
.num_resources = ARRAY_SIZE(bfin_gpc_resources),
.resource = bfin_gpc_resources,
.dev = {
.platform_data = &bfin_gpc_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpd_resources[] = {
{
.start = PORTD_FER,
.end = PORTD_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PD0,
.end = IRQ_PD0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = {
.port_pin_base = GPIO_PD0,
.port_width = GPIO_BANKSIZE,
.pint_id = 2,
.pint_assign = false,
.pint_map = 1,
};
static struct platform_device bfin_gpd_device = {
.name = ADI_GPIO_DEVNAME,
.id = 3,
.num_resources = ARRAY_SIZE(bfin_gpd_resources),
.resource = bfin_gpd_resources,
.dev = {
.platform_data = &bfin_gpd_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpe_resources[] = {
{
.start = PORTE_FER,
.end = PORTE_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PE0,
.end = IRQ_PE0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = {
.port_pin_base = GPIO_PE0,
.port_width = GPIO_BANKSIZE,
.pint_id = 3,
.pint_assign = false,
.pint_map = 1,
};
static struct platform_device bfin_gpe_device = {
.name = ADI_GPIO_DEVNAME,
.id = 4,
.num_resources = ARRAY_SIZE(bfin_gpe_resources),
.resource = bfin_gpe_resources,
.dev = {
.platform_data = &bfin_gpe_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpf_resources[] = {
{
.start = PORTF_FER,
.end = PORTF_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PF0,
.end = IRQ_PF0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = {
.port_pin_base = GPIO_PF0,
.port_width = GPIO_BANKSIZE,
.pint_id = 4,
.pint_assign = false,
.pint_map = 1,
};
static struct platform_device bfin_gpf_device = {
.name = ADI_GPIO_DEVNAME,
.id = 5,
.num_resources = ARRAY_SIZE(bfin_gpf_resources),
.resource = bfin_gpf_resources,
.dev = {
.platform_data = &bfin_gpf_pdata, /* Passed to driver */
},
};
static struct resource bfin_gpg_resources[] = {
{
.start = PORTG_FER,
.end = PORTG_MUX + 3,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_PG0,
.end = IRQ_PG0,
.flags = IORESOURCE_IRQ,
},
};
static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = {
.port_pin_base = GPIO_PG0,
.port_width = GPIO_BANKSIZE,
.pint_id = 5,
.pint_assign = false,
.pint_map = 1,
};
static struct platform_device bfin_gpg_device = {
.name = ADI_GPIO_DEVNAME,
.id = 6,
.num_resources = ARRAY_SIZE(bfin_gpg_resources),
.resource = bfin_gpg_resources,
.dev = {
.platform_data = &bfin_gpg_pdata, /* Passed to driver */
},
};
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h> #include <linux/input.h>
#include <linux/gpio_keys.h> #include <linux/gpio_keys.h>
...@@ -1349,7 +1707,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -1349,7 +1707,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.modalias = "m25p80", /* Name of spi_driver for this device */ .modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, /* Framework bus number */ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* SPI_SSEL1*/ .chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/
.platform_data = &bfin_spi_flash_data, .platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info, .controller_data = &spi_flash_chip_info,
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
...@@ -1362,7 +1720,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -1362,7 +1720,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.irq = IRQ_PD9, .irq = IRQ_PD9,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = 4, .chip_select = MAX_CTRL_CS + GPIO_PC15, /* SPI_SSEL4 */
}, },
#endif #endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
...@@ -1370,7 +1728,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -1370,7 +1728,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.modalias = "spidev", .modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = 1, .chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/
.controller_data = &spidev_chip_info, .controller_data = &spidev_chip_info,
}, },
#endif #endif
...@@ -1565,6 +1923,22 @@ static struct platform_device bfin_dpmc = { ...@@ -1565,6 +1923,22 @@ static struct platform_device bfin_dpmc = {
static struct platform_device *ezkit_devices[] __initdata = { static struct platform_device *ezkit_devices[] __initdata = {
&bfin_dpmc, &bfin_dpmc,
#if defined(CONFIG_PINCTRL_ADI2)
&bfin_pinctrl_device,
&bfin_pint0_device,
&bfin_pint1_device,
&bfin_pint2_device,
&bfin_pint3_device,
&bfin_pint4_device,
&bfin_pint5_device,
&bfin_gpa_device,
&bfin_gpb_device,
&bfin_gpc_device,
&bfin_gpd_device,
&bfin_gpe_device,
&bfin_gpf_device,
&bfin_gpg_device,
#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device, &rtc_device,
...@@ -1681,20 +2055,52 @@ static struct platform_device *ezkit_devices[] __initdata = { ...@@ -1681,20 +2055,52 @@ static struct platform_device *ezkit_devices[] __initdata = {
}; };
/* Pin control settings */
static struct pinctrl_map __initdata bfin_pinmux_map[] = {
/* per-device maps */
PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0", "pinctrl-adi2.0", NULL, "uart0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0", "pinctrl-adi2.0", NULL, "uart0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"),
PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0", "pinctrl-adi2.0", NULL, "eth0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.0", "pinctrl-adi2.0", NULL, "spi0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.1", "pinctrl-adi2.0", NULL, "spi1"),
PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"),
PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"),
PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0", "pinctrl-adi2.0", NULL, "smc0"),
PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2", "pinctrl-adi2.0", NULL, "ppi2_16b"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0", "pinctrl-adi2.0", NULL, "ppi0_16b"),
#if defined(CONFIG_VIDEO_MT9M114) || defined(CONFIG_VIDEO_MT9M114_MODULE)
PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_8b"),
#elif defined(CONFIG_VIDEO_VS6624) || defined(CONFIG_VIDEO_VS6624_MODULE)
PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_16b"),
#else
PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_24b"),
#endif
PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1", "pinctrl-adi2.0", NULL, "sport1"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1", "pinctrl-adi2.0", NULL, "sport1"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2", "pinctrl-adi2.0", NULL, "sport2"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2", "pinctrl-adi2.0", NULL, "sport2"),
};
static int __init ezkit_init(void) static int __init ezkit_init(void)
{ {
printk(KERN_INFO "%s(): registering device resources\n", __func__); printk(KERN_INFO "%s(): registering device resources\n", __func__);
/* Initialize pinmuxing */
pinctrl_register_mappings(bfin_pinmux_map,
ARRAY_SIZE(bfin_pinmux_map));
i2c_register_board_info(0, bfin_i2c_board_info0, i2c_register_board_info(0, bfin_i2c_board_info0,
ARRAY_SIZE(bfin_i2c_board_info0)); ARRAY_SIZE(bfin_i2c_board_info0));
i2c_register_board_info(1, bfin_i2c_board_info1, i2c_register_board_info(1, bfin_i2c_board_info1,
ARRAY_SIZE(bfin_i2c_board_info1)); ARRAY_SIZE(bfin_i2c_board_info1));
#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE)
if (!peripheral_request_list(pins, "emac0"))
printk(KERN_ERR "%s(): request emac pins failed\n", __func__);
#endif
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
...@@ -1713,18 +2119,6 @@ static struct platform_device *ezkit_early_devices[] __initdata = { ...@@ -1713,18 +2119,6 @@ static struct platform_device *ezkit_early_devices[] __initdata = {
&bfin_uart1_device, &bfin_uart1_device,
#endif #endif
#endif #endif
#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
&bfin_sport1_uart_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
&bfin_sport2_uart_device,
#endif
#endif
}; };
void __init native_machine_early_platform_add_devices(void) void __init native_machine_early_platform_add_devices(void)
......
arch/blackfin/mach-bf609/include/mach/gpio.h
View file @ 6c0514dd
...@@ -152,14 +152,6 @@ struct gpio_port_t { ...@@ -152,14 +152,6 @@ struct gpio_port_t {
unsigned long revid; unsigned long revid;
}; };
struct gpio_port_s {
unsigned short fer;
unsigned short data;
unsigned short dir;
unsigned short inen;
unsigned int mux;
};
#endif #endif
#include <mach-common/ports-a.h> #include <mach-common/ports-a.h>
......
arch/blackfin/mach-bf609/include/mach/irq.h
View file @ 6c0514dd
...@@ -298,7 +298,7 @@ ...@@ -298,7 +298,7 @@
extern u8 sec_int_priority[]; extern u8 sec_int_priority[];
/* /*
* bfin pint registers layout * gpio pint registers layout
*/ */
struct bfin_pint_regs { struct bfin_pint_regs {
u32 mask_set; u32 mask_set;
......
arch/blackfin/mach-bf609/include/mach/portmux.h
View file @ 6c0514dd
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0)) #define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0))
#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0)) #define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0))
#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0)) #define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0))
#define P_MII0_PTPPPS (P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(0))
#define P_RMII0 {\ #define P_RMII0 {\
P_MII0_ETxD0, \ P_MII0_ETxD0, \
...@@ -30,6 +31,7 @@ ...@@ -30,6 +31,7 @@
P_MII0_TxCLK, \ P_MII0_TxCLK, \
P_MII0_PHYINT, \ P_MII0_PHYINT, \
P_MII0_CRS, \ P_MII0_CRS, \
P_MII0_PTPPPS, \
P_MII0_MDC, \ P_MII0_MDC, \
P_MII0_MDIO, 0} P_MII0_MDIO, 0}
...@@ -44,6 +46,7 @@ ...@@ -44,6 +46,7 @@
#define P_MII1_CRS (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0)) #define P_MII1_CRS (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0))
#define P_MII1_ERxER (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0)) #define P_MII1_ERxER (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0))
#define P_MII1_TxCLK (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) #define P_MII1_TxCLK (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
#define P_MII1_PTPPPS (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0))
#define P_RMII1 {\ #define P_RMII1 {\
P_MII1_ETxD0, \ P_MII1_ETxD0, \
...@@ -55,6 +58,7 @@ ...@@ -55,6 +58,7 @@
P_MII1_TxCLK, \ P_MII1_TxCLK, \
P_MII1_PHYINT, \ P_MII1_PHYINT, \
P_MII1_CRS, \ P_MII1_CRS, \
P_MII1_PTPPPS, \
P_MII1_MDC, \ P_MII1_MDC, \
P_MII1_MDIO, 0} P_MII1_MDIO, 0}
......
arch/blackfin/mach-common/ints-priority.c
View file @ 6c0514dd
...@@ -704,10 +704,9 @@ static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle) ...@@ -704,10 +704,9 @@ static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
__irq_set_handler_locked(irq, handle); __irq_set_handler_locked(irq, handle);
} }
static DECLARE_BITMAP(gpio_enabled, MAX_BLACKFIN_GPIOS); #ifdef CONFIG_GPIO_ADI
extern void bfin_gpio_irq_prepare(unsigned gpio);
#if !BFIN_GPIO_PINT static DECLARE_BITMAP(gpio_enabled, MAX_BLACKFIN_GPIOS);
static void bfin_gpio_ack_irq(struct irq_data *d) static void bfin_gpio_ack_irq(struct irq_data *d)
{ {
...@@ -821,15 +820,6 @@ static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type) ...@@ -821,15 +820,6 @@ static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type)
return 0; return 0;
} }
#ifdef CONFIG_PM
static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state)
{
return gpio_pm_wakeup_ctrl(irq_to_gpio(d->irq), state);
}
#else
# define bfin_gpio_set_wake NULL
#endif
static void bfin_demux_gpio_block(unsigned int irq) static void bfin_demux_gpio_block(unsigned int irq)
{ {
unsigned int gpio, mask; unsigned int gpio, mask;
...@@ -896,279 +886,40 @@ void bfin_demux_gpio_irq(unsigned int inta_irq, ...@@ -896,279 +886,40 @@ void bfin_demux_gpio_irq(unsigned int inta_irq,
bfin_demux_gpio_block(irq); bfin_demux_gpio_block(irq);
} }
#else
#define NR_PINT_BITS 32
#define IRQ_NOT_AVAIL 0xFF
#define PINT_2_BANK(x) ((x) >> 5)
#define PINT_2_BIT(x) ((x) & 0x1F)
#define PINT_BIT(x) (1 << (PINT_2_BIT(x)))
static unsigned char irq2pint_lut[NR_PINTS];
static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS];
static struct bfin_pint_regs * const pint[NR_PINT_SYS_IRQS] = {
(struct bfin_pint_regs *)PINT0_MASK_SET,
(struct bfin_pint_regs *)PINT1_MASK_SET,
(struct bfin_pint_regs *)PINT2_MASK_SET,
(struct bfin_pint_regs *)PINT3_MASK_SET,
#ifdef CONFIG_BF60x
(struct bfin_pint_regs *)PINT4_MASK_SET,
(struct bfin_pint_regs *)PINT5_MASK_SET,
#endif
};
inline unsigned int get_irq_base(u32 bank, u8 bmap)
{
unsigned int irq_base;
#ifndef CONFIG_BF60x
if (bank < 2) { /*PA-PB */
irq_base = IRQ_PA0 + bmap * 16;
} else { /*PC-PJ */
irq_base = IRQ_PC0 + bmap * 16;
}
#else
irq_base = IRQ_PA0 + bank * 16 + bmap * 16;
#endif
return irq_base;
}
/* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
void init_pint_lut(void)
{
u16 bank, bit, irq_base, bit_pos;
u32 pint_assign;
u8 bmap;
memset(irq2pint_lut, IRQ_NOT_AVAIL, sizeof(irq2pint_lut));
for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) {
pint_assign = pint[bank]->assign;
for (bit = 0; bit < NR_PINT_BITS; bit++) {
bmap = (pint_assign >> ((bit / 8) * 8)) & 0xFF;
irq_base = get_irq_base(bank, bmap);
irq_base += (bit % 8) + ((bit / 8) & 1 ? 8 : 0);
bit_pos = bit + bank * NR_PINT_BITS;
pint2irq_lut[bit_pos] = irq_base - SYS_IRQS;
irq2pint_lut[irq_base - SYS_IRQS] = bit_pos;
}
}
}
static void bfin_gpio_ack_irq(struct irq_data *d)
{
u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS];
u32 pintbit = PINT_BIT(pint_val);
u32 bank = PINT_2_BANK(pint_val);
if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
if (pint[bank]->invert_set & pintbit)
pint[bank]->invert_clear = pintbit;
else
pint[bank]->invert_set = pintbit;
}
pint[bank]->request = pintbit;
}
static void bfin_gpio_mask_ack_irq(struct irq_data *d)
{
u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS];
u32 pintbit = PINT_BIT(pint_val);
u32 bank = PINT_2_BANK(pint_val);
if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
if (pint[bank]->invert_set & pintbit)
pint[bank]->invert_clear = pintbit;
else
pint[bank]->invert_set = pintbit;
}
pint[bank]->request = pintbit;
pint[bank]->mask_clear = pintbit;
}
static void bfin_gpio_mask_irq(struct irq_data *d)
{
u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS];
pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val);
}
static void bfin_gpio_unmask_irq(struct irq_data *d)
{
u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS];
u32 pintbit = PINT_BIT(pint_val);
u32 bank = PINT_2_BANK(pint_val);
pint[bank]->mask_set = pintbit;
}
static unsigned int bfin_gpio_irq_startup(struct irq_data *d)
{
unsigned int irq = d->irq;
u32 gpionr = irq_to_gpio(irq);
u32 pint_val = irq2pint_lut[irq - SYS_IRQS];
if (pint_val == IRQ_NOT_AVAIL) {
printk(KERN_ERR
"GPIO IRQ %d :Not in PINT Assign table "
"Reconfigure Interrupt to Port Assignemt\n", irq);
return -ENODEV;
}
if (__test_and_set_bit(gpionr, gpio_enabled))
bfin_gpio_irq_prepare(gpionr);
bfin_gpio_unmask_irq(d);
return 0;
}
static void bfin_gpio_irq_shutdown(struct irq_data *d)
{
u32 gpionr = irq_to_gpio(d->irq);
bfin_gpio_mask_irq(d);
__clear_bit(gpionr, gpio_enabled);
bfin_gpio_irq_free(gpionr);
}
static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type)
{
unsigned int irq = d->irq;
int ret;
char buf[16];
u32 gpionr = irq_to_gpio(irq);
u32 pint_val = irq2pint_lut[irq - SYS_IRQS];
u32 pintbit = PINT_BIT(pint_val);
u32 bank = PINT_2_BANK(pint_val);
if (pint_val == IRQ_NOT_AVAIL)
return -ENODEV;
if (type == IRQ_TYPE_PROBE) {
/* only probe unenabled GPIO interrupt lines */
if (test_bit(gpionr, gpio_enabled))
return 0;
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
}
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
snprintf(buf, 16, "gpio-irq%d", irq);
ret = bfin_gpio_irq_request(gpionr, buf);
if (ret)
return ret;
if (__test_and_set_bit(gpionr, gpio_enabled))
bfin_gpio_irq_prepare(gpionr);
} else {
__clear_bit(gpionr, gpio_enabled);
return 0;
}
if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */
else
pint[bank]->invert_clear = pintbit; /* high or rising edge denoted by zero */
if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
== (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
if (gpio_get_value(gpionr))
pint[bank]->invert_set = pintbit;
else
pint[bank]->invert_clear = pintbit;
}
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
pint[bank]->edge_set = pintbit;
bfin_set_irq_handler(irq, handle_edge_irq);
} else {
pint[bank]->edge_clear = pintbit;
bfin_set_irq_handler(irq, handle_level_irq);
}
return 0;
}
#ifdef CONFIG_PM #ifdef CONFIG_PM
static struct bfin_pm_pint_save save_pint_reg[NR_PINT_SYS_IRQS];
static u32 save_pint_sec_ctl[NR_PINT_SYS_IRQS];
static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state)
{ {
u32 pint_irq; return bfin_gpio_pm_wakeup_ctrl(irq_to_gpio(d->irq), state);
u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; }
u32 bank = PINT_2_BANK(pint_val);
switch (bank) {
case 0:
pint_irq = IRQ_PINT0;
break;
case 2:
pint_irq = IRQ_PINT2;
break;
case 3:
pint_irq = IRQ_PINT3;
break;
case 1:
pint_irq = IRQ_PINT1;
break;
#ifdef CONFIG_BF60x
case 4:
pint_irq = IRQ_PINT4;
break;
case 5:
pint_irq = IRQ_PINT5;
break;
#endif
default:
return -EINVAL;
}
#ifndef SEC_GCTL #else
bfin_internal_set_wake(pint_irq, state);
#endif
return 0; # define bfin_gpio_set_wake NULL
}
void bfin_pint_suspend(void) #endif
{
u32 bank;
for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) { static struct irq_chip bfin_gpio_irqchip = {
save_pint_reg[bank].mask_set = pint[bank]->mask_set; .name = "GPIO",
save_pint_reg[bank].assign = pint[bank]->assign; .irq_ack = bfin_gpio_ack_irq,
save_pint_reg[bank].edge_set = pint[bank]->edge_set; .irq_mask = bfin_gpio_mask_irq,
save_pint_reg[bank].invert_set = pint[bank]->invert_set; .irq_mask_ack = bfin_gpio_mask_ack_irq,
} .irq_unmask = bfin_gpio_unmask_irq,
} .irq_disable = bfin_gpio_mask_irq,
.irq_enable = bfin_gpio_unmask_irq,
.irq_set_type = bfin_gpio_irq_type,
.irq_startup = bfin_gpio_irq_startup,
.irq_shutdown = bfin_gpio_irq_shutdown,
.irq_set_wake = bfin_gpio_set_wake,
};
void bfin_pint_resume(void) #endif
{
u32 bank;
for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) { #ifdef CONFIG_PM
pint[bank]->mask_set = save_pint_reg[bank].mask_set;
pint[bank]->assign = save_pint_reg[bank].assign;
pint[bank]->edge_set = save_pint_reg[bank].edge_set;
pint[bank]->invert_set = save_pint_reg[bank].invert_set;
}
}
#ifdef SEC_GCTL #ifdef SEC_GCTL
static u32 save_pint_sec_ctl[NR_PINT_SYS_IRQS];
static int sec_suspend(void) static int sec_suspend(void)
{ {
u32 bank; u32 bank;
...@@ -1195,92 +946,10 @@ static struct syscore_ops sec_pm_syscore_ops = { ...@@ -1195,92 +946,10 @@ static struct syscore_ops sec_pm_syscore_ops = {
.suspend = sec_suspend, .suspend = sec_suspend,
.resume = sec_resume, .resume = sec_resume,
}; };
#endif
#else
# define bfin_gpio_set_wake NULL
#endif
void bfin_demux_gpio_irq(unsigned int inta_irq,
struct irq_desc *desc)
{
u32 bank, pint_val;
u32 request, irq;
u32 level_mask;
int umask = 0;
struct irq_chip *chip = irq_desc_get_chip(desc);
if (chip->irq_mask_ack) {
chip->irq_mask_ack(&desc->irq_data);
} else {
chip->irq_mask(&desc->irq_data);
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
}
switch (inta_irq) {
case IRQ_PINT0:
bank = 0;
break;
case IRQ_PINT2:
bank = 2;
break;
case IRQ_PINT3:
bank = 3;
break;
case IRQ_PINT1:
bank = 1;
break;
#ifdef CONFIG_BF60x
case IRQ_PINT4:
bank = 4;
break;
case IRQ_PINT5:
bank = 5;
break;
#endif #endif
default:
return;
}
pint_val = bank * NR_PINT_BITS;
request = pint[bank]->request;
level_mask = pint[bank]->edge_set & request;
while (request) {
if (request & 1) {
irq = pint2irq_lut[pint_val] + SYS_IRQS;
if (level_mask & PINT_BIT(pint_val)) {
umask = 1;
chip->irq_unmask(&desc->irq_data);
}
bfin_handle_irq(irq);
}
pint_val++;
request >>= 1;
}
if (!umask)
chip->irq_unmask(&desc->irq_data);
}
#endif #endif
static struct irq_chip bfin_gpio_irqchip = {
.name = "GPIO",
.irq_ack = bfin_gpio_ack_irq,
.irq_mask = bfin_gpio_mask_irq,
.irq_mask_ack = bfin_gpio_mask_ack_irq,
.irq_unmask = bfin_gpio_unmask_irq,
.irq_disable = bfin_gpio_mask_irq,
.irq_enable = bfin_gpio_unmask_irq,
.irq_set_type = bfin_gpio_irq_type,
.irq_startup = bfin_gpio_irq_startup,
.irq_shutdown = bfin_gpio_irq_shutdown,
.irq_set_wake = bfin_gpio_set_wake,
};
void init_exception_vectors(void) void init_exception_vectors(void)
{ {
/* cannot program in software: /* cannot program in software:
...@@ -1331,17 +1000,6 @@ int __init init_arch_irq(void) ...@@ -1331,17 +1000,6 @@ int __init init_arch_irq(void)
local_irq_disable(); local_irq_disable();
#if BFIN_GPIO_PINT
# ifdef CONFIG_PINTx_REASSIGN
pint[0]->assign = CONFIG_PINT0_ASSIGN;
pint[1]->assign = CONFIG_PINT1_ASSIGN;
pint[2]->assign = CONFIG_PINT2_ASSIGN;
pint[3]->assign = CONFIG_PINT3_ASSIGN;
# endif
/* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
init_pint_lut();
#endif
for (irq = 0; irq <= SYS_IRQS; irq++) { for (irq = 0; irq <= SYS_IRQS; irq++) {
if (irq <= IRQ_CORETMR) if (irq <= IRQ_CORETMR)
irq_set_chip(irq, &bfin_core_irqchip); irq_set_chip(irq, &bfin_core_irqchip);
...@@ -1349,12 +1007,8 @@ int __init init_arch_irq(void) ...@@ -1349,12 +1007,8 @@ int __init init_arch_irq(void)
irq_set_chip(irq, &bfin_internal_irqchip); irq_set_chip(irq, &bfin_internal_irqchip);
switch (irq) { switch (irq) {
#if BFIN_GPIO_PINT #if !BFIN_GPIO_PINT
case IRQ_PINT0: #if defined(BF537_FAMILY)
case IRQ_PINT1:
case IRQ_PINT2:
case IRQ_PINT3:
#elif defined(BF537_FAMILY)
case IRQ_PH_INTA_MAC_RX: case IRQ_PH_INTA_MAC_RX:
case IRQ_PF_INTA_PG_INTA: case IRQ_PF_INTA_PG_INTA:
#elif defined(BF533_FAMILY) #elif defined(BF533_FAMILY)
...@@ -1372,6 +1026,7 @@ int __init init_arch_irq(void) ...@@ -1372,6 +1026,7 @@ int __init init_arch_irq(void)
#endif #endif
irq_set_chained_handler(irq, bfin_demux_gpio_irq); irq_set_chained_handler(irq, bfin_demux_gpio_irq);
break; break;
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
case IRQ_MAC_ERROR: case IRQ_MAC_ERROR:
irq_set_chained_handler(irq, irq_set_chained_handler(irq,
...@@ -1419,10 +1074,12 @@ int __init init_arch_irq(void) ...@@ -1419,10 +1074,12 @@ int __init init_arch_irq(void)
handle_level_irq); handle_level_irq);
#endif #endif
/* if configured as edge, then will be changed to do_edge_IRQ */ /* if configured as edge, then will be changed to do_edge_IRQ */
#ifdef CONFIG_GPIO_ADI
for (irq = GPIO_IRQ_BASE; for (irq = GPIO_IRQ_BASE;
irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++) irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++)
irq_set_chip_and_handler(irq, &bfin_gpio_irqchip, irq_set_chip_and_handler(irq, &bfin_gpio_irqchip,
handle_level_irq); handle_level_irq);
#endif
bfin_write_IMASK(0); bfin_write_IMASK(0);
CSYNC(); CSYNC();
ilat = bfin_read_ILAT(); ilat = bfin_read_ILAT();
...@@ -1525,19 +1182,6 @@ int __init init_arch_irq(void) ...@@ -1525,19 +1182,6 @@ int __init init_arch_irq(void)
local_irq_disable(); local_irq_disable();
#if BFIN_GPIO_PINT
# ifdef CONFIG_PINTx_REASSIGN
pint[0]->assign = CONFIG_PINT0_ASSIGN;
pint[1]->assign = CONFIG_PINT1_ASSIGN;
pint[2]->assign = CONFIG_PINT2_ASSIGN;
pint[3]->assign = CONFIG_PINT3_ASSIGN;
pint[4]->assign = CONFIG_PINT4_ASSIGN;
pint[5]->assign = CONFIG_PINT5_ASSIGN;
# endif
/* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
init_pint_lut();
#endif
for (irq = 0; irq <= SYS_IRQS; irq++) { for (irq = 0; irq <= SYS_IRQS; irq++) {
if (irq <= IRQ_CORETMR) { if (irq <= IRQ_CORETMR) {
irq_set_chip_and_handler(irq, &bfin_core_irqchip, irq_set_chip_and_handler(irq, &bfin_core_irqchip,
...@@ -1546,9 +1190,6 @@ int __init init_arch_irq(void) ...@@ -1546,9 +1190,6 @@ int __init init_arch_irq(void)
if (irq == IRQ_CORETMR) if (irq == IRQ_CORETMR)
irq_set_handler(irq, handle_percpu_irq); irq_set_handler(irq, handle_percpu_irq);
#endif #endif
} else if (irq >= BFIN_IRQ(21) && irq <= BFIN_IRQ(26)) {
irq_set_chip(irq, &bfin_sec_irqchip);
irq_set_chained_handler(irq, bfin_demux_gpio_irq);
} else if (irq >= BFIN_IRQ(34) && irq <= BFIN_IRQ(37)) { } else if (irq >= BFIN_IRQ(34) && irq <= BFIN_IRQ(37)) {
irq_set_chip_and_handler(irq, &bfin_sec_irqchip, irq_set_chip_and_handler(irq, &bfin_sec_irqchip,
handle_percpu_irq); handle_percpu_irq);
...@@ -1563,10 +1204,6 @@ int __init init_arch_irq(void) ...@@ -1563,10 +1204,6 @@ int __init init_arch_irq(void)
__irq_set_preflow_handler(irq, bfin_sec_preflow_handler); __irq_set_preflow_handler(irq, bfin_sec_preflow_handler);
} }
} }
for (irq = GPIO_IRQ_BASE;
irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++)
irq_set_chip_and_handler(irq, &bfin_gpio_irqchip,
handle_level_irq);
bfin_write_IMASK(0); bfin_write_IMASK(0);
CSYNC(); CSYNC();
......
arch/blackfin/mach-common/pm.c
View file @ 6c0514dd
...@@ -27,7 +27,7 @@ struct bfin_cpu_pm_fns *bfin_cpu_pm; ...@@ -27,7 +27,7 @@ struct bfin_cpu_pm_fns *bfin_cpu_pm;
void bfin_pm_suspend_standby_enter(void) void bfin_pm_suspend_standby_enter(void)
{ {
#ifndef CONFIG_BF60x #if !BFIN_GPIO_PINT
bfin_pm_standby_setup(); bfin_pm_standby_setup();
#endif #endif
...@@ -41,7 +41,7 @@ void bfin_pm_suspend_standby_enter(void) ...@@ -41,7 +41,7 @@ void bfin_pm_suspend_standby_enter(void)
# endif # endif
#endif #endif
#ifndef CONFIG_BF60x #if !BFIN_GPIO_PINT
bfin_pm_standby_restore(); bfin_pm_standby_restore();
#endif #endif
...@@ -128,6 +128,7 @@ static void flushinv_all_dcache(void) ...@@ -128,6 +128,7 @@ static void flushinv_all_dcache(void)
if ((status & 0x3) != 0x3) if ((status & 0x3) != 0x3)
continue; continue;
/* construct the address using the tag */ /* construct the address using the tag */
addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5); addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
...@@ -140,11 +141,14 @@ static void flushinv_all_dcache(void) ...@@ -140,11 +141,14 @@ static void flushinv_all_dcache(void)
int bfin_pm_suspend_mem_enter(void) int bfin_pm_suspend_mem_enter(void)
{ {
int wakeup, ret; int ret;
#ifndef CONFIG_BF60x
int wakeup;
#endif
unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH
+ L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH, + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH,
GFP_KERNEL); GFP_ATOMIC);
if (memptr == NULL) { if (memptr == NULL) {
panic("bf53x_suspend_l1_mem malloc failed"); panic("bf53x_suspend_l1_mem malloc failed");
...@@ -170,10 +174,8 @@ int bfin_pm_suspend_mem_enter(void) ...@@ -170,10 +174,8 @@ int bfin_pm_suspend_mem_enter(void)
return ret; return ret;
} }
#ifdef CONFIG_GPIO_ADI
bfin_gpio_pm_hibernate_suspend(); bfin_gpio_pm_hibernate_suspend();
#if BFIN_GPIO_PINT
bfin_pint_suspend();
#endif #endif
#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) #if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
...@@ -194,11 +196,9 @@ int bfin_pm_suspend_mem_enter(void) ...@@ -194,11 +196,9 @@ int bfin_pm_suspend_mem_enter(void)
_enable_icplb(); _enable_icplb();
_enable_dcplb(); _enable_dcplb();
#if BFIN_GPIO_PINT #ifdef CONFIG_GPIO_ADI
bfin_pint_resume();
#endif
bfin_gpio_pm_hibernate_restore(); bfin_gpio_pm_hibernate_restore();
#endif
blackfin_dma_resume(); blackfin_dma_resume();
kfree(memptr); kfree(memptr);
......
arch/blackfin/mach-common/smp.c
View file @ 6c0514dd
...@@ -146,6 +146,7 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) ...@@ -146,6 +146,7 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
platform_clear_ipi(cpu, IRQ_SUPPLE_1); platform_clear_ipi(cpu, IRQ_SUPPLE_1);
smp_rmb();
bfin_ipi_data = &__get_cpu_var(bfin_ipi); bfin_ipi_data = &__get_cpu_var(bfin_ipi);
while ((pending = atomic_xchg(&bfin_ipi_data->bits, 0)) != 0) { while ((pending = atomic_xchg(&bfin_ipi_data->bits, 0)) != 0) {
msg = 0; msg = 0;
...@@ -161,18 +162,20 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) ...@@ -161,18 +162,20 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
case BFIN_IPI_CALL_FUNC: case BFIN_IPI_CALL_FUNC:
generic_smp_call_function_interrupt(); generic_smp_call_function_interrupt();
break; break;
case BFIN_IPI_CALL_FUNC_SINGLE: case BFIN_IPI_CALL_FUNC_SINGLE:
generic_smp_call_function_single_interrupt(); generic_smp_call_function_single_interrupt();
break; break;
case BFIN_IPI_CPU_STOP: case BFIN_IPI_CPU_STOP:
ipi_cpu_stop(cpu); ipi_cpu_stop(cpu);
break; break;
default:
goto out;
} }
atomic_dec(&bfin_ipi_data->count); atomic_dec(&bfin_ipi_data->count);
} while (msg < BITS_PER_LONG); } while (msg < BITS_PER_LONG);
} }
out:
return IRQ_HANDLED; return IRQ_HANDLED;
} }
...@@ -198,10 +201,11 @@ void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg) ...@@ -198,10 +201,11 @@ void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg)
bfin_ipi_data = &per_cpu(bfin_ipi, cpu); bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
atomic_set_mask((1 << msg), &bfin_ipi_data->bits); atomic_set_mask((1 << msg), &bfin_ipi_data->bits);
atomic_inc(&bfin_ipi_data->count); atomic_inc(&bfin_ipi_data->count);
platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1);
} }
local_irq_restore(flags); local_irq_restore(flags);
smp_wmb();
for_each_cpu(cpu, cpumask)
platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1);
} }
void arch_send_call_function_single_ipi(int cpu) void arch_send_call_function_single_ipi(int cpu)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7