[ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_*

IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1].
Remove them completely. Sed script for the reference:

s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g
s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g
s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g
s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g
s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g
s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g
s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g
s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_PROBE/IRQ_TYPE_PROBE/g
s/IRQT_NOEDGE/IRQ_TYPE_NONE/g
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Documentation/arm/Interrupts

@@ -138,14 +138,8 @@ So, what's changed?
 
                 Set active the IRQ edge(s)/level.  This replaces the
                 SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge()
-                function.  Type should be one of the following:
-
-                #define IRQT_NOEDGE     (0)
-                #define IRQT_RISING     (__IRQT_RISEDGE)
-                #define IRQT_FALLING    (__IRQT_FALEDGE)
-                #define IRQT_BOTHEDGE   (__IRQT_RISEDGE|__IRQT_FALEDGE)
-                #define IRQT_LOW        (__IRQT_LOWLVL)
-                #define IRQT_HIGH       (__IRQT_HIGHLVL)
+                function.  Type should be one of IRQ_TYPE_xxx defined in
+		<linux/irq.h>
 
 3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type.
 

arch/arm/common/locomo.c

@@ -331,17 +331,17 @@ static int locomo_gpio_type(unsigned int irq, unsigned int type)
 
 	mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
 			return 0;
-		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
-	if (type & __IRQT_RISEDGE)
+	if (type & IRQ_TYPE_EDGE_RISING)
 		GPIO_IRQ_rising_edge |= mask;
 	else
 		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & __IRQT_FALEDGE)
+	if (type & IRQ_TYPE_EDGE_FALLING)
 		GPIO_IRQ_falling_edge |= mask;
 	else
 		GPIO_IRQ_falling_edge &= ~mask;
@@ -473,7 +473,7 @@ static void locomo_setup_irq(struct locomo *lchip)
 	/*
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
-	set_irq_type(lchip->irq, IRQT_FALLING);
+	set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
 	set_irq_chip_data(lchip->irq, irqbase);
 	set_irq_chained_handler(lchip->irq, locomo_handler);
 

arch/arm/common/sa1111.c

@@ -241,14 +241,14 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip0;
 
-	if (flags == IRQT_PROBE)
+	if (flags == IRQ_TYPE_PROBE)
 		return 0;
 
-	if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0)
+	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 		return -EINVAL;
 
 	ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
-	if (flags & __IRQT_RISEDGE)
+	if (flags & IRQ_TYPE_EDGE_RISING)
 		ip0 &= ~mask;
 	else
 		ip0 |= mask;
@@ -338,14 +338,14 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip1;
 
-	if (flags == IRQT_PROBE)
+	if (flags == IRQ_TYPE_PROBE)
 		return 0;
 
-	if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0)
+	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 		return -EINVAL;
 
 	ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
-	if (flags & __IRQT_RISEDGE)
+	if (flags & IRQ_TYPE_EDGE_RISING)
 		ip1 &= ~mask;
 	else
 		ip1 |= mask;
@@ -427,7 +427,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 	/*
 	 * Register SA1111 interrupt
 	 */
-	set_irq_type(sachip->irq, IRQT_RISING);
+	set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
 	set_irq_data(sachip->irq, irqbase);
 	set_irq_chained_handler(sachip->irq, sa1111_irq_handler);
 }

arch/arm/mach-at91/board-cap9adk.c

@@ -330,10 +330,10 @@ static void __init cap9adk_board_init(void)
 	/* Serial */
 	at91_add_device_serial();
 	/* USB Host */
-	set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_usbh(&cap9adk_usbh_data);
 	/* USB HS */
-	set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_usba(&cap9adk_usba_udc_data);
 	/* SPI */
 	at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
@@ -350,7 +350,7 @@ static void __init cap9adk_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* LCD Controller */
-	set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_lcdc(&cap9adk_lcdc_data);
 	/* AC97 */
 	at91_add_device_ac97(&cap9adk_ac97_data);

arch/arm/mach-at91/irq.c

@@ -56,19 +56,19 @@ static int at91_aic_set_type(unsigned irq, unsigned type)
 	unsigned int smr, srctype;
 
 	switch (type) {
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		srctype = AT91_AIC_SRCTYPE_HIGH;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		srctype = AT91_AIC_SRCTYPE_RISING;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_LOW;
 		else
 			return -EINVAL;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_FALLING;
 		else

arch/arm/mach-ep93xx/core.c

@@ -226,7 +226,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq)
 	int port = line >> 3;
 	int port_mask = 1 << (line & 7);
 
-	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
 		ep93xx_gpio_update_int_params(port);
 	}
@@ -240,7 +240,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
 	int port = line >> 3;
 	int port_mask = 1 << (line & 7);
 
-	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE)
+	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
 
 	gpio_int_unmasked[port] &= ~port_mask;
@@ -283,27 +283,27 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 	gpio_direction_input(gpio);
 
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		gpio_int_type1[port] |= port_mask;
 		gpio_int_type2[port] |= port_mask;
 		desc->handle_irq = handle_edge_irq;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		gpio_int_type1[port] |= port_mask;
 		gpio_int_type2[port] &= ~port_mask;
 		desc->handle_irq = handle_edge_irq;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		gpio_int_type1[port] &= ~port_mask;
 		gpio_int_type2[port] |= port_mask;
 		desc->handle_irq = handle_level_irq;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		gpio_int_type1[port] &= ~port_mask;
 		gpio_int_type2[port] &= ~port_mask;
 		desc->handle_irq = handle_level_irq;
 		break;
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		gpio_int_type1[port] |= port_mask;
 		/* set initial polarity based on current input level */
 		if (gpio_get_value(gpio))

arch/arm/mach-imx/irq.c

@@ -111,7 +111,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 	reg = irq >> 5;
 	bit = 1 << (irq % 32);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		/* Don't mess with enabled GPIOs using preconfigured edges or
 		   GPIOs set to alternate function during probe */
 		/* TODO: support probe */
@@ -120,7 +120,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 //                      return 0;
 //              if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
 //                      return 0;
-//              type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+//              type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
 	GIUS(reg) |= bit;
@@ -128,19 +128,19 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 
 	DEBUG_IRQ("setting type of irq %d to ", _irq);
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		DEBUG_IRQ("rising edges\n");
 		irq_type = 0x0;
 	}
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		DEBUG_IRQ("falling edges\n");
 		irq_type = 0x1;
 	}
-	if (type & __IRQT_LOWLVL) {
+	if (type & IRQ_TYPE_LEVEL_LOW) {
 		DEBUG_IRQ("low level\n");
 		irq_type = 0x3;
 	}
-	if (type & __IRQT_HIGHLVL) {
+	if (type & IRQ_TYPE_LEVEL_HIGH) {
 		DEBUG_IRQ("high level\n");
 		irq_type = 0x2;
 	}

arch/arm/mach-ixp2000/core.c

@@ -329,19 +329,19 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
 	/*
 	 * Then, set the proper trigger type.
 	 */
-	if (type & IRQT_FALLING)
+	if (type & IRQ_TYPE_EDGE_FALLING)
 		GPIO_IRQ_falling_edge |= 1 << line;
 	else
 		GPIO_IRQ_falling_edge &= ~(1 << line);
-	if (type & IRQT_RISING)
+	if (type & IRQ_TYPE_EDGE_RISING)
 		GPIO_IRQ_rising_edge |= 1 << line;
 	else
 		GPIO_IRQ_rising_edge &= ~(1 << line);
-	if (type & IRQT_LOW)
+	if (type & IRQ_TYPE_LEVEL_LOW)
 		GPIO_IRQ_level_low |= 1 << line;
 	else
 		GPIO_IRQ_level_low &= ~(1 << line);
-	if (type & IRQT_HIGH)
+	if (type & IRQ_TYPE_LEVEL_HIGH)
 		GPIO_IRQ_level_high |= 1 << line;
 	else
 		GPIO_IRQ_level_high &= ~(1 << line);

arch/arm/mach-ixp23xx/core.c

@@ -126,23 +126,23 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	switch (type) {
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
 		irq_type = IXP23XX_IRQ_LEVEL;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP23XX_IRQ_LEVEL;
 		break;

arch/arm/mach-ixp23xx/roadrunner.c

@@ -110,8 +110,8 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 
 static void __init roadrunner_pci_preinit(void)
 {
-	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp23xx_pci_preinit();
 }

arch/arm/mach-ixp4xx/avila-pci.c

@@ -30,10 +30,10 @@
 
 void __init avila_pci_preinit(void)
 {
-	set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }

arch/arm/mach-ixp4xx/common.c

@@ -142,23 +142,23 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	switch (type){
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
 		irq_type = IXP4XX_IRQ_LEVEL;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP4XX_IRQ_LEVEL;
 		break;

arch/arm/mach-ixp4xx/coyote-pci.c

@@ -27,8 +27,8 @@
 
 void __init coyote_pci_preinit(void)
 {
-	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
-	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }

arch/arm/mach-ixp4xx/dsmg600-pci.c

@@ -25,12 +25,12 @@
 
 void __init dsmg600_pci_preinit(void)
 {
-	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }

arch/arm/mach-ixp4xx/fsg-pci.c

@@ -25,9 +25,9 @@
 
 void __init fsg_pci_preinit(void)
 {
-	set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }

arch/arm/mach-ixp4xx/gateway7001-pci.c

@@ -29,8 +29,8 @@
 
 void __init gateway7001_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }

arch/arm/mach-ixp4xx/gtwx5715-pci.c

@@ -41,10 +41,10 @@
  */
 void __init gtwx5715_pci_preinit(void)
 {
-	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }

arch/arm/mach-ixp4xx/ixdp425-pci.c

@@ -27,10 +27,10 @@
 
 void __init ixdp425_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }

arch/arm/mach-ixp4xx/ixdpg425-pci.c

@@ -25,8 +25,8 @@
 
 void __init ixdpg425_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }

arch/arm/mach-ixp4xx/nas100d-pci.c

@@ -24,11 +24,11 @@
 
 void __init nas100d_pci_preinit(void)
 {
-	set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }

arch/arm/mach-ixp4xx/nslu2-pci.c

@@ -24,9 +24,9 @@
 
 void __init nslu2_pci_preinit(void)
 {
-	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }

arch/arm/mach-ixp4xx/wg302v2-pci.c

@@ -29,8 +29,8 @@
 
 void __init wg302v2_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }

arch/arm/mach-ks8695/irq.c

@@ -72,21 +72,21 @@ static int ks8695_irq_set_type(unsigned int irqno, unsigned int type)
 	ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
 
 	switch (type) {
-		case IRQT_HIGH:
+		case IRQ_TYPE_LEVEL_HIGH:
 			mode = IOPC_TM_HIGH;
 			level_triggered = 1;
 			break;
-		case IRQT_LOW:
+		case IRQ_TYPE_LEVEL_LOW:
 			mode = IOPC_TM_LOW;
 			level_triggered = 1;
 			break;
-		case IRQT_RISING:
+		case IRQ_TYPE_EDGE_RISING:
 			mode = IOPC_TM_RISING;
 			break;
-		case IRQT_FALLING:
+		case IRQ_TYPE_EDGE_FALLING:
 			mode = IOPC_TM_FALLING;
 			break;
-		case IRQT_BOTHEDGE:
+		case IRQ_TYPE_EDGE_BOTH:
 			mode = IOPC_TM_EDGE;
 			break;
 		default:

arch/arm/mach-netx/generic.c

@@ -99,19 +99,19 @@ netx_hif_irq_type(unsigned int _irq, unsigned int type)
 
 	irq = _irq - NETX_IRQ_HIF_CHAINED(0);
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		DEBUG_IRQ("rising edges\n");
 		val |= (1 << 26) << irq;
 	}
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		DEBUG_IRQ("falling edges\n");
 		val &= ~((1 << 26) << irq);
 	}
-	if (type & __IRQT_LOWLVL) {
+	if (type & IRQ_TYPE_LEVEL_LOW) {
 		DEBUG_IRQ("low level\n");
 		val &= ~((1 << 26) << irq);
 	}
-	if (type & __IRQT_HIGHLVL) {
+	if (type & IRQ_TYPE_LEVEL_HIGH) {
 		DEBUG_IRQ("high level\n");
 		val |= (1 << 26) << irq;
 	}

arch/arm/mach-omap1/board-osk.c

@@ -288,7 +288,7 @@ static void __init osk_init_cf(void)
 		return;
 	}
 	/* the CF I/O IRQ is really active-low */
-	set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING);
+	set_irq_type(OMAP_GPIO_IRQ(62), IRQ_TYPE_EDGE_FALLING);
 }
 
 static void __init osk_init_irq(void)
@@ -483,7 +483,7 @@ static void __init osk_mistral_init(void)
 	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
 	gpio_request(4, "ts_int");
 	gpio_direction_input(4);
-	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+	set_irq_type(OMAP_GPIO_IRQ(4), IRQ_TYPE_EDGE_FALLING);
 
 	spi_register_board_info(mistral_boardinfo,
 			ARRAY_SIZE(mistral_boardinfo));
@@ -494,7 +494,7 @@ static void __init osk_mistral_init(void)
 		int ret = 0;
 
 		gpio_direction_input(OMAP_MPUIO(2));
-		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
+		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQ_TYPE_EDGE_RISING);
 #ifdef	CONFIG_PM
 		/* share the IRQ in case someone wants to use the
 		 * button for more than wakeup from system sleep.

arch/arm/mach-omap1/board-palmz71.c

@@ -298,11 +298,11 @@ palmz71_powercable(int irq, void *dev_id)
 	if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
 		printk(KERN_INFO "PM: Power cable connected\n");
 		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
-				IRQT_FALLING);
+				IRQ_TYPE_EDGE_FALLING);
 	} else {
 		printk(KERN_INFO "PM: Power cable disconnected\n");
 		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
-				IRQT_RISING);
+				IRQ_TYPE_EDGE_RISING);
 	}
 	return IRQ_HANDLED;
 }

arch/arm/mach-omap1/board-voiceblue.c

@@ -186,10 +186,10 @@ static void __init voiceblue_init(void)
 	omap_request_gpio(13);
 	omap_request_gpio(14);
 	omap_request_gpio(15);
-	set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(12), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(14), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(15), IRQ_TYPE_EDGE_RISING);
 
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
 	omap_board_config = voiceblue_config;

arch/arm/mach-omap1/fpga.c

@@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void)
 	 */
 	omap_request_gpio(13);
 	omap_set_gpio_direction(13, 1);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
 }
 

arch/arm/mach-omap2/board-apollon.c

@@ -337,17 +337,17 @@ static void __init apollon_sw_init(void)
 	omap_request_gpio(SW_DOWN_GPIO58);
 	omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
 
-	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
 				IRQF_SHARED, "enter sw",
 				&apollon_sw_interrupt))
 		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
 				IRQF_SHARED, "up sw",
 				&apollon_sw_interrupt))
 		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
 				IRQF_SHARED, "down sw",
 				&apollon_sw_interrupt))

arch/arm/mach-orion5x/db88f5281-setup.c

@@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void)
 	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void)
 	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int2") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit faield "
 					"to set_irq_type pin %d\n", pin);

arch/arm/mach-orion5x/irq.c

@@ -91,27 +91,27 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
 	desc = irq_desc + irq;
 
 	switch (type) {
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
 		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
 		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		/*
@@ -156,7 +156,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 		if (cause & (1 << pin)) {
 			irq = gpio_to_irq(pin);
 			desc = irq_desc + irq;
-			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
 				/* Swap polarity (race with GPIO line) */
 				u32 polarity = readl(GPIO_IN_POL);
 				polarity ^= 1 << pin;

arch/arm/mach-orion5x/rd88f5182-setup.c

@@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void)
 	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
 	if (gpio_request(pin, "PCI IntA") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void)
 	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
 	if (gpio_request(pin, "PCI IntB") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);

arch/arm/mach-orion5x/ts209-setup.c

@@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void)
 	pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
 					"set_irq_type pin %d\n", pin);
@@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void)
 	pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int2") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "qnap_ts209_pci_preinit failed "
 					"to set_irq_type pin %d\n", pin);

arch/arm/mach-pnx4008/irq.c

@@ -56,28 +56,28 @@ static void pnx4008_mask_ack_irq(unsigned int irq)
 static int pnx4008_set_irq_type(unsigned int irq, unsigned int type)
 {
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));	/*edge sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));	/*rising edge */
 		set_irq_handler(irq, handle_edge_irq);
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));	/*edge sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));	/*falling edge */
 		set_irq_handler(irq, handle_edge_irq);
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));	/*level sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));	/*low level */
 		set_irq_handler(irq, handle_level_irq);
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));	/*level sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));	/* high level */
 		set_irq_handler(irq, handle_level_irq);
 		break;
 
-	/* IRQT_BOTHEDGE is not supported */
+	/* IRQ_TYPE_EDGE_BOTH is not supported */
 	default:
 		printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
 		return -1;

arch/arm/mach-pxa/cm-x270-pci.c

@@ -71,7 +71,7 @@ void __cmx270_pci_init_irq(int irq_gpio)
 
 	cmx270_it8152_irq_gpio = irq_gpio;
 
-	set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING);
+	set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
 
 	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
 }

arch/arm/mach-pxa/lpd270.c

@@ -113,7 +113,7 @@ static void __init lpd270_init_irq(void)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 	set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 

arch/arm/mach-pxa/lubbock.c

@@ -152,7 +152,7 @@ static void __init lubbock_init_irq(void)
 	}
 
 	set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM

arch/arm/mach-pxa/mainstone.c

@@ -191,7 +191,7 @@ static void __init mainstone_init_irq(void)
 	MST_INTSETCLR = 0;
 
 	set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM

arch/arm/mach-pxa/sharpsl_pm.c

@@ -146,18 +146,18 @@ void sharpsl_pm_pxa_init(void)
 	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
 
 	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
 
 	if (sharpsl_pm.machinfo->gpio_fatal) {
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
 	}
 
 	if (sharpsl_pm.machinfo->batfull_irq)
@@ -166,7 +166,7 @@ void sharpsl_pm_pxa_init(void)
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
 	}
 }
 

arch/arm/mach-pxa/trizeps4.c

@@ -122,7 +122,7 @@ static struct resource dm9000_resources[] = {
 	[2] = {
 		.start	= TRIZEPS4_ETH_IRQ,
 		.end	= TRIZEPS4_ETH_IRQ,
-		.flags	= (IORESOURCE_IRQ | IRQT_RISING),
+		.flags	= (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING),
 	},
 };
 

arch/arm/mach-sa1100/cerf.c

@@ -96,7 +96,7 @@ static struct resource cerf_flash_resource = {
 static void __init cerf_init_irq(void)
 {
 	sa1100_init_irq();
-	set_irq_type(CERF_ETH_IRQ, IRQT_RISING);
+	set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING);
 }
 
 static struct map_desc cerf_io_desc[] __initdata = {

arch/arm/mach-sa1100/h3600.c

@@ -834,7 +834,7 @@ static void __init h3800_init_irq(void)
 		set_irq_chip(irq, &h3800_gpio_irqchip);
 	}
 #endif
-	set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING);
+	set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
 }
 

arch/arm/mach-sa1100/irq.c

@@ -46,17 +46,17 @@ static int sa1100_gpio_type(unsigned int irq, unsigned int type)
 	else
 		mask = GPIO11_27_MASK(irq);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
 			return 0;
-		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		GPIO_IRQ_rising_edge |= mask;
 	} else
 		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		GPIO_IRQ_falling_edge |= mask;
 	} else
 		GPIO_IRQ_falling_edge &= ~mask;

arch/arm/mach-sa1100/neponset.c

@@ -151,7 +151,7 @@ static int __devinit neponset_probe(struct platform_device *dev)
 	/*
 	 * Install handler for GPIO25.
 	 */
-	set_irq_type(IRQ_GPIO25, IRQT_RISING);
+	set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler);
 
 	/*

arch/arm/mach-sa1100/pleb.c

@@ -143,7 +143,7 @@ static void __init pleb_map_io(void)
 
 	GPDR &= ~GPIO_ETH0_IRQ;
 
-	set_irq_type(GPIO_ETH0_IRQ, IRQT_FALLING);
+	set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING);
 }
 
 MACHINE_START(PLEB, "PLEB")

arch/arm/plat-mxc/gpio.c

@@ -73,19 +73,19 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	void __iomem *reg = port->base;
 
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		edge = GPIO_INT_RISE_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		edge = GPIO_INT_FALL_EDGE;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		edge = GPIO_INT_LOW_LEV;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		edge = GPIO_INT_HIGH_LEV;
 		break;
-	default:	/* this includes IRQT_BOTHEDGE */
+	default:	/* this includes IRQ_TYPE_EDGE_BOTH */
 		return -EINVAL;
 	}
 

arch/arm/plat-omap/gpio.c

@@ -517,13 +517,13 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 	u32 gpio_bit = 1 << gpio;
 
 	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-		trigger & __IRQT_LOWLVL);
+		trigger & IRQ_TYPE_LEVEL_LOW);
 	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-		trigger & __IRQT_HIGHLVL);
+		trigger & IRQ_TYPE_LEVEL_HIGH);
 	MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-		trigger & __IRQT_RISEDGE);
+		trigger & IRQ_TYPE_EDGE_RISING);
 	MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-		trigger & __IRQT_FALEDGE);
+		trigger & IRQ_TYPE_EDGE_FALLING);
 
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
 		if (trigger != 0)
@@ -555,9 +555,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -567,9 +567,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -584,9 +584,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 		gpio &= 0x07;
 		l = __raw_readl(reg);
 		l &= ~(3 << (gpio << 1));
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 2 << (gpio << 1);
-		if (trigger & __IRQT_FALEDGE)
+		if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l |= 1 << (gpio << 1);
 		if (trigger)
 			/* Enable wake-up during idle for dynamic tick */
@@ -599,9 +599,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -887,7 +887,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio)
 	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
 	_set_gpio_irqenable(bank, gpio, 0);
 	_clear_gpio_irqstatus(bank, gpio);
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 }
 
 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
@@ -924,7 +924,7 @@ int omap_request_gpio(int gpio)
 	/* Set trigger to none. You need to enable the desired trigger with
 	 * request_irq() or set_irq_type().
 	 */
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (bank->method == METHOD_GPIO_1510) {

arch/arm/plat-s3c24xx/irq.c

@@ -292,27 +292,27 @@ s3c_irqext_type(unsigned int irq, unsigned int type)
 	/* Set the external interrupt to pointed trigger type */
 	switch (type)
 	{
-		case IRQT_NOEDGE:
+		case IRQ_TYPE_NONE:
 			printk(KERN_WARNING "No edge setting!\n");
 			break;
 
-		case IRQT_RISING:
+		case IRQ_TYPE_EDGE_RISING:
 			newvalue = S3C2410_EXTINT_RISEEDGE;
 			break;
 
-		case IRQT_FALLING:
+		case IRQ_TYPE_EDGE_FALLING:
 			newvalue = S3C2410_EXTINT_FALLEDGE;
 			break;
 
-		case IRQT_BOTHEDGE:
+		case IRQ_TYPE_EDGE_BOTH:
 			newvalue = S3C2410_EXTINT_BOTHEDGE;
 			break;
 
-		case IRQT_LOW:
+		case IRQ_TYPE_LEVEL_LOW:
 			newvalue = S3C2410_EXTINT_LOWLEV;
 			break;
 
-		case IRQT_HIGH:
+		case IRQ_TYPE_LEVEL_HIGH:
 			newvalue = S3C2410_EXTINT_HILEV;
 			break;
 

drivers/ata/pata_ixp4xx_cf.c

@@ -169,7 +169,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq)
-		set_irq_type(irq, IRQT_RISING);
+		set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
 
 	/* Setup expansion bus chip selects */
 	*data->cs0_cfg = data->cs0_bits;

drivers/input/touchscreen/corgi_ts.c

@@ -195,7 +195,7 @@ static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer)
 {
 	if ((GPLR(IRQ_TO_GPIO(corgi_ts->irq_gpio)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts->irq_gpio))) == 0) {
 		/* Disable Interrupt */
-		set_irq_type(corgi_ts->irq_gpio, IRQT_NOEDGE);
+		set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_NONE);
 		if (read_xydata(corgi_ts)) {
 			corgi_ts->pendown = 1;
 			new_data(corgi_ts);
@@ -214,7 +214,7 @@ static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer)
 		}
 
 		/* Enable Falling Edge */
-		set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
+		set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
 		corgi_ts->pendown = 0;
 	}
 }
@@ -258,7 +258,7 @@ static int corgits_resume(struct platform_device *dev)
 
 	corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
 	/* Enable Falling Edge */
-	set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
+	set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
 	corgi_ts->power_mode = PWR_MODE_ACTIVE;
 
 	return 0;
@@ -333,7 +333,7 @@ static int __init corgits_probe(struct platform_device *pdev)
 	corgi_ts->power_mode = PWR_MODE_ACTIVE;
 
 	/* Enable Falling Edge */
-	set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
+	set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
 
 	return 0;
 

drivers/input/touchscreen/mainstone-wm97xx.c

@@ -198,7 +198,7 @@ static int wm97xx_acc_startup(struct wm97xx *wm)
 		switch (wm->id) {
 		case WM9705_ID2:
 			wm->pen_irq = IRQ_GPIO(4);
-			set_irq_type(IRQ_GPIO(4), IRQT_BOTHEDGE);
+			set_irq_type(IRQ_GPIO(4), IRQ_TYPE_EDGE_BOTH);
 			break;
 		case WM9712_ID2:
 		case WM9713_ID2:

drivers/mfd/asic3.c

@@ -256,28 +256,28 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
 				      bank + ASIC3_GPIO_TRIGGER_TYPE);
 	asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit;
 
-	if (type == IRQT_RISING) {
+	if (type == IRQ_TYPE_EDGE_RISING) {
 		trigger |= bit;
 		edge |= bit;
-	} else if (type == IRQT_FALLING) {
+	} else if (type == IRQ_TYPE_EDGE_FALLING) {
 		trigger |= bit;
 		edge &= ~bit;
-	} else if (type == IRQT_BOTHEDGE) {
+	} else if (type == IRQ_TYPE_EDGE_BOTH) {
 		trigger |= bit;
 		if (asic3_gpio_get(&asic->gpio, irq - asic->irq_base))
 			edge &= ~bit;
 		else
 			edge |= bit;
 		asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit;
-	} else if (type == IRQT_LOW) {
+	} else if (type == IRQ_TYPE_LEVEL_LOW) {
 		trigger &= ~bit;
 		level &= ~bit;
-	} else if (type == IRQT_HIGH) {
+	} else if (type == IRQ_TYPE_LEVEL_HIGH) {
 		trigger &= ~bit;
 		level |= bit;
 	} else {
 		/*
-		 * if type == IRQT_NOEDGE, we should mask interrupts, but
+		 * if type == IRQ_TYPE_NONE, we should mask interrupts, but
 		 * be careful to not unmask them if mask was also called.
 		 * Probably need internal state for mask.
 		 */
@@ -343,7 +343,7 @@ static int __init asic3_irq_probe(struct platform_device *pdev)
 			     ASIC3_INTMASK_GINTMASK);
 
 	set_irq_chained_handler(asic->irq_nr, asic3_irq_demux);
-	set_irq_type(asic->irq_nr, IRQT_RISING);
+	set_irq_type(asic->irq_nr, IRQ_TYPE_EDGE_RISING);
 	set_irq_data(asic->irq_nr, asic);
 
 	return 0;

drivers/mfd/tc6393xb.c

@@ -324,7 +324,7 @@ static void tc6393xb_attach_irq(struct platform_device *dev)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	set_irq_type(tc6393xb->irq, IRQT_FALLING);
+	set_irq_type(tc6393xb->irq, IRQ_TYPE_EDGE_FALLING);
 	set_irq_data(tc6393xb->irq, tc6393xb);
 	set_irq_chained_handler(tc6393xb->irq, tc6393xb_irq);
 }

drivers/pcmcia/soc_common.c

@@ -149,10 +149,10 @@ soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *stat
 		 */
 		if (skt->irq_state != 1 && state->io_irq) {
 			skt->irq_state = 1;
-			set_irq_type(skt->irq, IRQT_FALLING);
+			set_irq_type(skt->irq, IRQ_TYPE_EDGE_FALLING);
 		} else if (skt->irq_state == 1 && state->io_irq == 0) {
 			skt->irq_state = 0;
-			set_irq_type(skt->irq, IRQT_NOEDGE);
+			set_irq_type(skt->irq, IRQ_TYPE_NONE);
 		}
 
 		skt->cs_state = *state;
@@ -527,7 +527,7 @@ int soc_pcmcia_request_irqs(struct soc_pcmcia_socket *skt,
 				  IRQF_DISABLED, irqs[i].str, skt);
 		if (res)
 			break;
-		set_irq_type(irqs[i].irq, IRQT_NOEDGE);
+		set_irq_type(irqs[i].irq, IRQ_TYPE_NONE);
 	}
 
 	if (res) {
@@ -560,7 +560,7 @@ void soc_pcmcia_disable_irqs(struct soc_pcmcia_socket *skt,
 
 	for (i = 0; i < nr; i++)
 		if (irqs[i].sock == skt->nr)
-			set_irq_type(irqs[i].irq, IRQT_NOEDGE);
+			set_irq_type(irqs[i].irq, IRQ_TYPE_NONE);
 }
 EXPORT_SYMBOL(soc_pcmcia_disable_irqs);
 
@@ -571,8 +571,8 @@ void soc_pcmcia_enable_irqs(struct soc_pcmcia_socket *skt,
 
 	for (i = 0; i < nr; i++)
 		if (irqs[i].sock == skt->nr) {
-			set_irq_type(irqs[i].irq, IRQT_RISING);
-			set_irq_type(irqs[i].irq, IRQT_BOTHEDGE);
+			set_irq_type(irqs[i].irq, IRQ_TYPE_EDGE_RISING);
+			set_irq_type(irqs[i].irq, IRQ_TYPE_EDGE_BOTH);
 		}
 }
 EXPORT_SYMBOL(soc_pcmcia_enable_irqs);

drivers/video/am200epd.c

@@ -221,7 +221,7 @@ static int am200_setup_irq(struct fb_info *info)
 		return retval;
 	}
 
-	return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQT_FALLING);
+	return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQ_TYPE_EDGE_FALLING);
 }
 
 static void am200_set_rst(struct metronomefb_par *par, int state)

drivers/video/omap/sossi.c

@@ -646,7 +646,7 @@ static int sossi_init(struct omapfb_device *fbdev)
 	sossi_write_reg(SOSSI_INIT1_REG, l);
 
 	if ((r = request_irq(INT_1610_SoSSI_MATCH, sossi_match_irq,
-			     IRQT_FALLING,
+			     IRQ_TYPE_EDGE_FALLING,
 	     "sossi_match", sossi.fbdev->dev)) < 0) {
 		dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n");
 		goto err;

include/asm-arm/arch-pnx4008/irqs.h

@@ -135,30 +135,30 @@
 
 #define PNX4008_IRQ_TYPES \
 {                                           /*IRQ #'s: */         \
-IRQT_LOW,  IRQT_LOW,  IRQT_LOW,  IRQT_HIGH, /*  0, 1, 2, 3 */     \
-IRQT_LOW,  IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /*  4, 5, 6, 7 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /*  8, 9,10,11 */     \
-IRQT_LOW,  IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 12,13,14,15 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 16,17,18,19 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 20,21,22,23 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 24,25,26,27 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_LOW,  IRQT_LOW,  /* 28,29,30,31 */     \
-IRQT_HIGH, IRQT_LOW,  IRQT_HIGH, IRQT_HIGH, /* 32,33,34,35 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_FALLING, IRQT_HIGH, /* 36,37,38,39 */  \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 40,41,42,43 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 44,45,46,47 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_LOW,  IRQT_LOW,  /* 48,49,50,51 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 52,53,54,55 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_LOW,  IRQT_HIGH, /* 56,57,58,59 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 60,61,62,63 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 64,65,66,67 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 68,69,70,71 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 72,73,74,75 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 76,77,78,79 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 80,81,82,83 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 84,85,86,87 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 88,89,90,91 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 92,93,94,95 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /*  0, 1, 2, 3 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  4, 5, 6, 7 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  8, 9,10,11 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 28,29,30,31 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */  \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 48,49,50,51 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */     \
 }
 
 /* Start Enable Pin Interrupts - table 58 page 66 */

include/asm-arm/arch-pxa/idp.h

@@ -138,18 +138,18 @@
 #define TOUCH_PANEL_IRQ			IRQ_GPIO(5)
 #define IDE_IRQ				IRQ_GPIO(21)
 
-#define TOUCH_PANEL_IRQ_EDGE		IRQT_FALLING
+#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
 
 #define ETHERNET_IRQ			IRQ_GPIO(4)
-#define ETHERNET_IRQ_EDGE		IRQT_RISING
+#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
 
-#define IDE_IRQ_EDGE			IRQT_RISING
+#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
 
 #define PCMCIA_S0_CD_VALID		IRQ_GPIO(7)
-#define PCMCIA_S0_CD_VALID_EDGE		IRQT_BOTHEDGE
+#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
 
 #define PCMCIA_S1_CD_VALID		IRQ_GPIO(8)
-#define PCMCIA_S1_CD_VALID_EDGE		IRQT_BOTHEDGE
+#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
 
 #define PCMCIA_S0_RDYINT		IRQ_GPIO(19)
 #define PCMCIA_S1_RDYINT		IRQ_GPIO(22)

include/asm-arm/arch-pxa/pcm990_baseboard.h

@@ -29,14 +29,14 @@
 /* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
 #define PCM990_CTRL_INT_IRQ_GPIO	9
 #define PCM990_CTRL_INT_IRQ		IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
-#define PCM990_CTRL_INT_IRQ_EDGE	IRQT_RISING
+#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 #define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
 #define PCM990_CTRL_BASE		0xea000000
 #define PCM990_CTRL_SIZE		(1*1024*1024)
 
 #define PCM990_CTRL_PWR_IRQ_GPIO	14
 #define PCM990_CTRL_PWR_IRQ		IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
-#define PCM990_CTRL_PWR_IRQ_EDGE	IRQT_RISING
+#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 
 /* visible CPLD (U7) registers */
 #define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
@@ -133,7 +133,7 @@
  */
 #define PCM990_IDE_IRQ_GPIO	13
 #define PCM990_IDE_IRQ		IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
-#define PCM990_IDE_IRQ_EDGE	IRQT_RISING
+#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 #define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
 #define PCM990_IDE_PLD_BASE	0xee000000
 #define PCM990_IDE_PLD_SIZE	(1*1024*1024)
@@ -189,11 +189,11 @@
  */
 #define PCM990_CF_IRQ_GPIO	11
 #define PCM990_CF_IRQ		IRQ_GPIO(PCM990_CF_IRQ_GPIO)
-#define PCM990_CF_IRQ_EDGE	IRQT_RISING
+#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 
 #define PCM990_CF_CD_GPIO	12
 #define PCM990_CF_CD		IRQ_GPIO(PCM990_CF_CD_GPIO)
-#define PCM990_CF_CD_EDGE	IRQT_RISING
+#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
 
 #define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
 #define PCM990_CF_PLD_BASE	0xef000000
@@ -259,14 +259,14 @@
  */
 #define PCM990_AC97_IRQ_GPIO	10
 #define PCM990_AC97_IRQ		IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
-#define PCM990_AC97_IRQ_EDGE	IRQT_RISING
+#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 
 /*
  * MMC phyCORE
  */
 #define PCM990_MMC0_IRQ_GPIO	9
 #define PCM990_MMC0_IRQ		IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
-#define PCM990_MMC0_IRQ_EDGE	IRQT_FALLING
+#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
 
 /*
  * USB phyCore

include/asm-arm/arch-sa1100/ide.h

@@ -61,7 +61,7 @@ ide_init_default_hwifs(void)
 
         /* Enable GPIO as interrupt line */
         GPDR &= ~LART_GPIO_IDE;
-	set_irq_type(LART_IRQ_IDE, IRQT_RISING);
+	set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
 
         /* set PCMCIA interface timing */
         MECR = 0x00060006;

include/asm-arm/irq.h

@@ -19,23 +19,6 @@
 #define NO_IRQ	((unsigned int)(-1))
 #endif
 
-
-/*
- * Migration helpers
- */
-#define __IRQT_FALEDGE	IRQ_TYPE_EDGE_FALLING
-#define __IRQT_RISEDGE	IRQ_TYPE_EDGE_RISING
-#define __IRQT_LOWLVL	IRQ_TYPE_LEVEL_LOW
-#define __IRQT_HIGHLVL	IRQ_TYPE_LEVEL_HIGH
-
-#define IRQT_NOEDGE	(0)
-#define IRQT_RISING	(__IRQT_RISEDGE)
-#define IRQT_FALLING	(__IRQT_FALEDGE)
-#define IRQT_BOTHEDGE	(__IRQT_RISEDGE|__IRQT_FALEDGE)
-#define IRQT_LOW	(__IRQT_LOWLVL)
-#define IRQT_HIGH	(__IRQT_HIGHLVL)
-#define IRQT_PROBE	IRQ_TYPE_PROBE
-
 #ifndef __ASSEMBLY__
 struct irqaction;
 extern void migrate_irqs(void);