Commit 6d416e61 authored by Boaz Harrosh's avatar Boaz Harrosh Committed by James Bottomley

[SCSI] usb: transport - convert to accessors and !use_sg code path removal

  - This patch depends on:
    usb: transport.c use scsi_eh API in REQUEST_SENSE execution

  - Use scsi data accessors and remove of !use_sg code path.
  - New usb_stor_bulk_srb() for use by drivers

[jejb: updated with corrective fix.

had a bug in residual handling in the new usb_stor_bulk_srb()
function.  Found by Gabriel C. in -mm tree.
Tested-by: default avatarGabriel C <nix.or.die@googlemail.com>
]
Signed-off-by: default avatarBoaz Harrosh <bharrosh@panasas.com>
Acked-by: default avatarMatthew Dharm <mdharm-scsi@one-eyed-alien.net>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent 4776e99e
......@@ -458,6 +458,22 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
us->current_sg.bytes);
}
/*
* Common used function. Transfer a complete command
* via usb_stor_bulk_transfer_sglist() above. Set cmnd resid
*/
int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
struct scsi_cmnd* srb)
{
unsigned int partial;
int result = usb_stor_bulk_transfer_sglist(us, pipe, scsi_sglist(srb),
scsi_sg_count(srb), scsi_bufflen(srb),
&partial);
scsi_set_resid(srb, scsi_bufflen(srb) - partial);
return result;
}
/*
* Transfer an entire SCSI command's worth of data payload over the bulk
* pipe.
......@@ -508,7 +524,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
int result;
/* send the command to the transport layer */
srb->resid = 0;
scsi_set_resid(srb, 0);
result = us->transport(srb, us);
/* if the command gets aborted by the higher layers, we need to
......@@ -568,7 +584,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
* A short transfer on a command where we don't expect it
* is unusual, but it doesn't mean we need to auto-sense.
*/
if ((srb->resid > 0) &&
if ((scsi_get_resid(srb) > 0) &&
!((srb->cmnd[0] == REQUEST_SENSE) ||
(srb->cmnd[0] == INQUIRY) ||
(srb->cmnd[0] == MODE_SENSE) ||
......@@ -593,7 +609,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
srb->cmd_len = 12;
/* issue the auto-sense command */
srb->resid = 0;
scsi_set_resid(srb, 0);
temp_result = us->transport(us->srb, us);
/* let's clean up right away */
......@@ -649,7 +665,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
/* Did we transfer less than the minimum amount required? */
if (srb->result == SAM_STAT_GOOD &&
srb->request_bufflen - srb->resid < srb->underflow)
scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow)
srb->result = (DID_ERROR << 16) | (SUGGEST_RETRY << 24);
return;
......@@ -708,7 +724,7 @@ void usb_stor_stop_transport(struct us_data *us)
int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us)
{
unsigned int transfer_length = srb->request_bufflen;
unsigned int transfer_length = scsi_bufflen(srb);
unsigned int pipe = 0;
int result;
......@@ -737,9 +753,7 @@ int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us)
if (transfer_length) {
pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
us->recv_bulk_pipe : us->send_bulk_pipe;
result = usb_stor_bulk_transfer_sg(us, pipe,
srb->request_buffer, transfer_length,
srb->use_sg, &srb->resid);
result = usb_stor_bulk_srb(us, pipe, srb);
US_DEBUGP("CBI data stage result is 0x%x\n", result);
/* if we stalled the data transfer it means command failed */
......@@ -808,7 +822,7 @@ int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us)
*/
int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
{
unsigned int transfer_length = srb->request_bufflen;
unsigned int transfer_length = scsi_bufflen(srb);
int result;
/* COMMAND STAGE */
......@@ -836,9 +850,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
if (transfer_length) {
unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
us->recv_bulk_pipe : us->send_bulk_pipe;
result = usb_stor_bulk_transfer_sg(us, pipe,
srb->request_buffer, transfer_length,
srb->use_sg, &srb->resid);
result = usb_stor_bulk_srb(us, pipe, srb);
US_DEBUGP("CB data stage result is 0x%x\n", result);
/* if we stalled the data transfer it means command failed */
......@@ -904,7 +916,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
unsigned int transfer_length = srb->request_bufflen;
unsigned int transfer_length = scsi_bufflen(srb);
unsigned int residue;
int result;
int fake_sense = 0;
......@@ -955,9 +967,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
if (transfer_length) {
unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
us->recv_bulk_pipe : us->send_bulk_pipe;
result = usb_stor_bulk_transfer_sg(us, pipe,
srb->request_buffer, transfer_length,
srb->use_sg, &srb->resid);
result = usb_stor_bulk_srb(us, pipe, srb);
US_DEBUGP("Bulk data transfer result 0x%x\n", result);
if (result == USB_STOR_XFER_ERROR)
return USB_STOR_TRANSPORT_ERROR;
......@@ -1036,7 +1046,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
if (residue) {
if (!(us->flags & US_FL_IGNORE_RESIDUE)) {
residue = min(residue, transfer_length);
srb->resid = max(srb->resid, (int) residue);
scsi_set_resid(srb, max(scsi_get_resid(srb),
(int) residue));
}
}
......
......@@ -139,6 +139,8 @@ extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
void *buf, unsigned int length, unsigned int *act_len);
extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe,
void *buf, unsigned int length, int use_sg, int *residual);
extern int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
struct scsi_cmnd* srb);
extern int usb_stor_port_reset(struct us_data *us);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment