Merge branch 'next/devel-exynos5250-1' of...

Merge branch 'next/devel-exynos5250-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc2

* 'next/devel-exynos5250-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: Add AUXDATA for i2c controllers
  ARM: dts: Update device tree source files for EXYNOS5250
  ARM: EXYNOS: Add device tree support for interrupt combiner
  ARM: EXYNOS: Add irq_domain support for interrupt combiner
  ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5
  ARM: EXYNOS: update irqs for EXYNOS5250 SoC
  ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll
  ARM: EXYNOS: add GPC4 bank instance
  ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition
  ARM: EXYNOS: Modify the GIC physical address for static io-mapping
  ARM: EXYNOS: Add watchdog timer clock instance
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt

+* Samsung Exynos Interrupt Combiner Controller
+
+Samsung's Exynos4 architecture includes a interrupt combiner controller which
+can combine interrupt sources as a group and provide a single interrupt request
+for the group. The interrupt request from each group are connected to a parent
+interrupt controller, such as GIC in case of Exynos4210.
+
+The interrupt combiner controller consists of multiple combiners. Upto eight
+interrupt sources can be connected to a combiner. The combiner outputs one
+combined interrupt for its eight interrupt sources. The combined interrupt
+is usually connected to a parent interrupt controller.
+
+A single node in the device tree is used to describe the interrupt combiner
+controller module (which includes multiple combiners). A combiner in the
+interrupt controller module shares config/control registers with other
+combiners. For example, a 32-bit interrupt enable/disable config register
+can accommodate upto 4 interrupt combiners (with each combiner supporting
+upto 8 interrupt sources).
+
+Required properties:
+- compatible: should be "samsung,exynos4210-combiner".
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: should be <2>. The meaning of the cells are
+	* First Cell: Combiner Group Number.
+	* Second Cell: Interrupt number within the group.
+- reg: Base address and size of interrupt combiner registers.
+- interrupts: The list of interrupts generated by the combiners which are then
+    connected to a parent interrupt controller. The format of the interrupt
+    specifier depends in the interrupt parent controller.
+
+Optional properties:
+- samsung,combiner-nr: The number of interrupt combiners supported. If this
+  property is not specified, the default number of combiners is assumed
+  to be 16.
+- interrupt-parent: pHandle of the parent interrupt controller, if not
+  inherited from the parent node.
+
+
+Example:
+
+	The following is a an example from the Exynos4210 SoC dtsi file.
+
+	combiner:interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reg = <0x10440000 0x1000>;
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+	};

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -23,4 +23,52 @@ memory {
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
 	};
+
+	i2c@12C60000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		gpios = <&gpb3 0 2 3 0>,
+			<&gpb3 1 2 3 0>;
+
+		eeprom@50 {
+			compatible = "samsung,s524ad0xd1";
+			reg = <0x50>;
+		};
+	};
+
+	i2c@12C70000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		gpios = <&gpb3 2 2 3 0>,
+			<&gpb3 3 2 3 0>;
+
+		eeprom@51 {
+			compatible = "samsung,s524ad0xd1";
+			reg = <0x51>;
+		};
+	};
+
+	i2c@12C80000 {
+		status = "disabled";
+	};
+
+	i2c@12C90000 {
+		status = "disabled";
+	};
+
+	i2c@12CA0000 {
+		status = "disabled";
+	};
+
+	i2c@12CB0000 {
+		status = "disabled";
+	};
+
+	i2c@12CC0000 {
+		status = "disabled";
+	};
+
+	i2c@12CD0000 {
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/exynos5250.dtsi

@@ -23,11 +23,11 @@ / {
 	compatible = "samsung,exynos5250";
 	interrupt-parent = <&gic>;
 
-	gic:interrupt-controller@10490000 {
+	gic:interrupt-controller@10481000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+		reg = <0x10481000 0x1000>, <0x10482000 0x2000>;
 	};
 
 	watchdog {
@@ -42,30 +42,6 @@ rtc {
 		interrupts = <0 43 0>, <0 44 0>;
 	};
 
-	sdhci@12200000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12200000 0x100>;
-		interrupts = <0 75 0>;
-	};
-
-	sdhci@12210000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12210000 0x100>;
-		interrupts = <0 76 0>;
-	};
-
-	sdhci@12220000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12220000 0x100>;
-		interrupts = <0 77 0>;
-	};
-
-	sdhci@12230000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12230000 0x100>;
-		interrupts = <0 78 0>;
-	};
-
 	serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
@@ -94,48 +70,64 @@ i2c@12C60000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C60000 0x100>;
 		interrupts = <0 56 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C70000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C70000 0x100>;
 		interrupts = <0 57 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C80000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C80000 0x100>;
 		interrupts = <0 58 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C90000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C90000 0x100>;
 		interrupts = <0 59 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CA0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CA0000 0x100>;
 		interrupts = <0 60 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CB0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CB0000 0x100>;
 		interrupts = <0 61 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CC0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CC0000 0x100>;
 		interrupts = <0 62 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CD0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CD0000 0x100>;
 		interrupts = <0 63 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	amba {
@@ -157,13 +149,13 @@ pdma1: pdma@121B0000 {
 			interrupts = <0 35 0>;
 		};
 
-		mdma0: pdma@10800000 {
+		mdma0: mdma@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
 		};
 
-		mdma1: pdma@11C10000 {
+		mdma1: mdma@11C10000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <0 124 0>;
@@ -242,6 +234,12 @@ gpc3: gpio-controller@11400140 {
 			#gpio-cells = <4>;
 		};
 
+		gpc4: gpio-controller@114002E0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x114002E0 0x20>;
+			#gpio-cells = <4>;
+		};
+
 		gpd0: gpio-controller@11400160 {
 			compatible = "samsung,exynos4-gpio";
 			reg = <0x11400160 0x20>;
@@ -388,19 +386,19 @@ gpv1: gpio-controller@10D10020 {
 
 		gpv2: gpio-controller@10D10040 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10040 0x20>;
+			reg = <0x10D10060 0x20>;
 			#gpio-cells = <4>;
 		};
 
 		gpv3: gpio-controller@10D10060 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10060 0x20>;
+			reg = <0x10D10080 0x20>;
 			#gpio-cells = <4>;
 		};
 
 		gpv4: gpio-controller@10D10080 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10080 0x20>;
+			reg = <0x10D100C0 0x20>;
 			#gpio-cells = <4>;
 		};
 

arch/arm/mach-exynos/clock-exynos5.c

@@ -165,11 +165,29 @@ static struct clksrc_clk exynos5_clk_sclk_apll = {
 	.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
 };
 
+static struct clksrc_clk exynos5_clk_mout_bpll_fout = {
+	.clk	= {
+		.name		= "mout_bpll_fout",
+	},
+	.sources = &clk_src_bpll_fout,
+	.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_bpll_list[] = {
+	[0] = &clk_fin_bpll,
+	[1] = &exynos5_clk_mout_bpll_fout.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_bpll = {
+	.sources	= exynos5_clk_src_bpll_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_bpll_list),
+};
+
 static struct clksrc_clk exynos5_clk_mout_bpll = {
 	.clk	= {
 		.name		= "mout_bpll",
 	},
-	.sources = &clk_src_bpll,
+	.sources = &exynos5_clk_src_bpll,
 	.reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
 };
 
@@ -207,11 +225,29 @@ static struct clksrc_clk exynos5_clk_mout_epll = {
 	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
 };
 
+static struct clksrc_clk exynos5_clk_mout_mpll_fout = {
+	.clk	= {
+		.name		= "mout_mpll_fout",
+	},
+	.sources = &clk_src_mpll_fout,
+	.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 4, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &exynos5_clk_mout_mpll_fout.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_mpll = {
+	.sources	= exynos5_clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_mpll_list),
+};
+
 struct clksrc_clk exynos5_clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
 	},
-	.sources = &clk_src_mpll,
+	.sources = &exynos5_clk_src_mpll,
 	.reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
 };
 
@@ -473,6 +509,11 @@ static struct clk exynos5_init_clocks_off[] = {
 		.parent		= &exynos5_clk_aclk_66.clk,
 		.enable		= exynos5_clk_ip_peris_ctrl,
 		.ctrlbit	= (1 << 20),
+	}, {
+		.name		= "watchdog",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peris_ctrl,
+		.ctrlbit	= (1 << 19),
 	}, {
 		.name		= "hsmmc",
 		.devname	= "exynos4-sdhci.0",
@@ -1031,10 +1072,12 @@ static struct clksrc_clk *exynos5_sysclks[] = {
 	&exynos5_clk_mout_apll,
 	&exynos5_clk_sclk_apll,
 	&exynos5_clk_mout_bpll,
+	&exynos5_clk_mout_bpll_fout,
 	&exynos5_clk_mout_bpll_user,
 	&exynos5_clk_mout_cpll,
 	&exynos5_clk_mout_epll,
 	&exynos5_clk_mout_mpll,
+	&exynos5_clk_mout_mpll_fout,
 	&exynos5_clk_mout_mpll_user,
 	&exynos5_clk_vpllsrc,
 	&exynos5_clk_sclk_vpll,
@@ -1098,7 +1141,9 @@ static struct clk *exynos5_clks[] __initdata = {
 	&exynos5_clk_sclk_hdmi27m,
 	&exynos5_clk_sclk_hdmiphy,
 	&clk_fout_bpll,
+	&clk_fout_bpll_div2,
 	&clk_fout_cpll,
+	&clk_fout_mpll_div2,
 	&exynos5_clk_armclk,
 };
 
@@ -1263,8 +1308,10 @@ void __init_or_cpufreq exynos5_setup_clocks(void)
 
 	clk_fout_apll.ops = &exynos5_fout_apll_ops;
 	clk_fout_bpll.rate = bpll;
+	clk_fout_bpll_div2.rate = bpll >> 1;
 	clk_fout_cpll.rate = cpll;
 	clk_fout_mpll.rate = mpll;
+	clk_fout_mpll_div2.rate = mpll >> 1;
 	clk_fout_epll.rate = epll;
 	clk_fout_vpll.rate = vpll;
 

arch/arm/mach-exynos/common.c

@@ -19,6 +19,9 @@
 #include <linux/serial_core.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
+#include <linux/export.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
 
 #include <asm/proc-fns.h>
 #include <asm/exception.h>
@@ -265,12 +268,12 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 	}, {
 		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
-		.length		= SZ_64K,
+		.length		= SZ_8K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
-		.length		= SZ_64K,
+		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	},
 };
@@ -399,6 +402,7 @@ struct combiner_chip_data {
 	void __iomem *base;
 };
 
+static struct irq_domain *combiner_irq_domain;
 static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
 
 static inline void __iomem *combiner_base(struct irq_data *data)
@@ -411,14 +415,14 @@ static inline void __iomem *combiner_base(struct irq_data *data)
 
 static void combiner_mask_irq(struct irq_data *data)
 {
-	u32 mask = 1 << (data->irq % 32);
+	u32 mask = 1 << (data->hwirq % 32);
 
 	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
 }
 
 static void combiner_unmask_irq(struct irq_data *data)
 {
-	u32 mask = 1 << (data->irq % 32);
+	u32 mask = 1 << (data->hwirq % 32);
 
 	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
 }
@@ -474,49 +478,127 @@ static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int i
 	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
 }
 
-static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
-			  unsigned int irq_start)
+static void __init combiner_init_one(unsigned int combiner_nr,
+				     void __iomem *base)
 {
-	unsigned int i;
-	unsigned int max_nr;
-
-	if (soc_is_exynos5250())
-		max_nr = EXYNOS5_MAX_COMBINER_NR;
-	else
-		max_nr = EXYNOS4_MAX_COMBINER_NR;
-
-	if (combiner_nr >= max_nr)
-		BUG();
-
 	combiner_data[combiner_nr].base = base;
-	combiner_data[combiner_nr].irq_offset = irq_start;
+	combiner_data[combiner_nr].irq_offset = irq_find_mapping(
+		combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
 	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
 
 	/* Disable all interrupts */
-
 	__raw_writel(combiner_data[combiner_nr].irq_mask,
 		     base + COMBINER_ENABLE_CLEAR);
+}
+
+#ifdef CONFIG_OF
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+				     struct device_node *controller,
+				     const u32 *intspec, unsigned int intsize,
+				     unsigned long *out_hwirq,
+				     unsigned int *out_type)
+{
+	if (d->of_node != controller)
+		return -EINVAL;
+
+	if (intsize < 2)
+		return -EINVAL;
+
+	*out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
+	*out_type = 0;
+
+	return 0;
+}
+#else
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+				     struct device_node *controller,
+				     const u32 *intspec, unsigned int intsize,
+				     unsigned long *out_hwirq,
+				     unsigned int *out_type)
+{
+	return -EINVAL;
+}
+#endif
+
+static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
+				   irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
+	irq_set_chip_data(irq, &combiner_data[hw >> 3]);
+	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 
-	/* Setup the Linux IRQ subsystem */
+	return 0;
+}
+
+static struct irq_domain_ops combiner_irq_domain_ops = {
+	.xlate	= combiner_irq_domain_xlate,
+	.map	= combiner_irq_domain_map,
+};
 
-	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
-				+ MAX_IRQ_IN_COMBINER; i++) {
-		irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
-		irq_set_chip_data(i, &combiner_data[combiner_nr]);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+void __init combiner_init(void __iomem *combiner_base, struct device_node *np)
+{
+	int i, irq, irq_base;
+	unsigned int max_nr, nr_irq;
+
+	if (np) {
+		if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
+			pr_warning("%s: number of combiners not specified, "
+				"setting default as %d.\n",
+				__func__, EXYNOS4_MAX_COMBINER_NR);
+			max_nr = EXYNOS4_MAX_COMBINER_NR;
+		}
+	} else {
+		max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
+						EXYNOS4_MAX_COMBINER_NR;
+	}
+	nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
+
+	irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
+	if (IS_ERR_VALUE(irq_base)) {
+		irq_base = COMBINER_IRQ(0, 0);
+		pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
+	}
+
+	combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
+				&combiner_irq_domain_ops, &combiner_data);
+	if (WARN_ON(!combiner_irq_domain)) {
+		pr_warning("%s: irq domain init failed\n", __func__);
+		return;
+	}
+
+	for (i = 0; i < max_nr; i++) {
+		combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
+		irq = np ? irq_of_parse_and_map(np, i) : IRQ_SPI(i);
+		combiner_cascade_irq(i, irq);
 	}
 }
 
 #ifdef CONFIG_OF
+int __init combiner_of_init(struct device_node *np, struct device_node *parent)
+{
+	void __iomem *combiner_base;
+
+	combiner_base = of_iomap(np, 0);
+	if (!combiner_base) {
+		pr_err("%s: failed to map combiner registers\n", __func__);
+		return -ENXIO;
+	}
+
+	combiner_init(combiner_base, np);
+
+	return 0;
+}
+
 static const struct of_device_id exynos4_dt_irq_match[] = {
 	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{ .compatible = "samsung,exynos4210-combiner",
+			.data = combiner_of_init, },
 	{},
 };
 #endif
 
 void __init exynos4_init_irq(void)
 {
-	int irq;
 	unsigned int gic_bank_offset;
 
 	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
@@ -528,12 +610,8 @@ void __init exynos4_init_irq(void)
 		of_irq_init(exynos4_dt_irq_match);
 #endif
 
-	for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) {
-
-		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
-				COMBINER_IRQ(irq, 0));
-		combiner_cascade_irq(irq, IRQ_SPI(irq));
-	}
+	if (!of_have_populated_dt())
+		combiner_init(S5P_VA_COMBINER_BASE, NULL);
 
 	/*
 	 * The parameters of s5p_init_irq() are for VIC init.
@@ -545,18 +623,9 @@ void __init exynos4_init_irq(void)
 
 void __init exynos5_init_irq(void)
 {
-	int irq;
-
 #ifdef CONFIG_OF
 	of_irq_init(exynos4_dt_irq_match);
 #endif
-
-	for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
-		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
-				COMBINER_IRQ(irq, 0));
-		combiner_cascade_irq(irq, IRQ_SPI(irq));
-	}
-
 	/*
 	 * The parameters of s5p_init_irq() are for VIC init.
 	 * Theses parameters should be NULL and 0 because EXYNOS4
@@ -565,30 +634,18 @@ void __init exynos5_init_irq(void)
 	s5p_init_irq(NULL, 0);
 }
 
-struct bus_type exynos4_subsys = {
-	.name		= "exynos4-core",
-	.dev_name	= "exynos4-core",
-};
-
-struct bus_type exynos5_subsys = {
-	.name		= "exynos5-core",
-	.dev_name	= "exynos5-core",
+struct bus_type exynos_subsys = {
+	.name		= "exynos-core",
+	.dev_name	= "exynos-core",
 };
 
 static struct device exynos4_dev = {
-	.bus	= &exynos4_subsys,
-};
-
-static struct device exynos5_dev = {
-	.bus	= &exynos5_subsys,
+	.bus	= &exynos_subsys,
 };
 
 static int __init exynos_core_init(void)
 {
-	if (soc_is_exynos5250())
-		return subsys_system_register(&exynos5_subsys, NULL);
-	else
-		return subsys_system_register(&exynos4_subsys, NULL);
+	return subsys_system_register(&exynos_subsys, NULL);
 }
 core_initcall(exynos_core_init);
 
@@ -675,9 +732,6 @@ static int __init exynos_init(void)
 {
 	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
 
-	if (soc_is_exynos5250())
-		return device_register(&exynos5_dev);
-	else
 	return device_register(&exynos4_dev);
 }
 

arch/arm/mach-exynos/include/mach/gpio.h

@@ -153,10 +153,11 @@ enum exynos4_gpio_number {
 #define EXYNOS5_GPIO_B2_NR	(4)
 #define EXYNOS5_GPIO_B3_NR	(4)
 #define EXYNOS5_GPIO_C0_NR	(7)
-#define EXYNOS5_GPIO_C1_NR	(7)
+#define EXYNOS5_GPIO_C1_NR	(4)
 #define EXYNOS5_GPIO_C2_NR	(7)
 #define EXYNOS5_GPIO_C3_NR	(7)
-#define EXYNOS5_GPIO_D0_NR	(8)
+#define EXYNOS5_GPIO_C4_NR	(7)
+#define EXYNOS5_GPIO_D0_NR	(4)
 #define EXYNOS5_GPIO_D1_NR	(8)
 #define EXYNOS5_GPIO_Y0_NR	(6)
 #define EXYNOS5_GPIO_Y1_NR	(4)
@@ -199,7 +200,8 @@ enum exynos5_gpio_number {
 	EXYNOS5_GPIO_C1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0),
 	EXYNOS5_GPIO_C2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1),
 	EXYNOS5_GPIO_C3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2),
-	EXYNOS5_GPIO_D0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
+	EXYNOS5_GPIO_C4_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
+	EXYNOS5_GPIO_D0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C4),
 	EXYNOS5_GPIO_D1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0),
 	EXYNOS5_GPIO_Y0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1),
 	EXYNOS5_GPIO_Y1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0),
@@ -242,6 +244,7 @@ enum exynos5_gpio_number {
 #define EXYNOS5_GPC1(_nr)	(EXYNOS5_GPIO_C1_START + (_nr))
 #define EXYNOS5_GPC2(_nr)	(EXYNOS5_GPIO_C2_START + (_nr))
 #define EXYNOS5_GPC3(_nr)	(EXYNOS5_GPIO_C3_START + (_nr))
+#define EXYNOS5_GPC4(_nr)	(EXYNOS5_GPIO_C4_START + (_nr))
 #define EXYNOS5_GPD0(_nr)	(EXYNOS5_GPIO_D0_START + (_nr))
 #define EXYNOS5_GPD1(_nr)	(EXYNOS5_GPIO_D1_START + (_nr))
 #define EXYNOS5_GPY0(_nr)	(EXYNOS5_GPIO_Y0_START + (_nr))

arch/arm/mach-exynos/include/mach/irqs.h

@@ -286,6 +286,7 @@
 #define EXYNOS5_IRQ_MIPICSI1		IRQ_SPI(80)
 #define EXYNOS5_IRQ_EFNFCON_DMA_ABORT	IRQ_SPI(81)
 #define EXYNOS5_IRQ_MIPIDSI0		IRQ_SPI(82)
+#define EXYNOS5_IRQ_WDT_IOP		IRQ_SPI(83)
 #define EXYNOS5_IRQ_ROTATOR		IRQ_SPI(84)
 #define EXYNOS5_IRQ_GSC0		IRQ_SPI(85)
 #define EXYNOS5_IRQ_GSC1		IRQ_SPI(86)
@@ -294,8 +295,8 @@
 #define EXYNOS5_IRQ_JPEG		IRQ_SPI(89)
 #define EXYNOS5_IRQ_EFNFCON_DMA		IRQ_SPI(90)
 #define EXYNOS5_IRQ_2D			IRQ_SPI(91)
-#define EXYNOS5_IRQ_SFMC0		IRQ_SPI(92)
-#define EXYNOS5_IRQ_SFMC1		IRQ_SPI(93)
+#define EXYNOS5_IRQ_EFNFCON_0		IRQ_SPI(92)
+#define EXYNOS5_IRQ_EFNFCON_1		IRQ_SPI(93)
 #define EXYNOS5_IRQ_MIXER		IRQ_SPI(94)
 #define EXYNOS5_IRQ_HDMI		IRQ_SPI(95)
 #define EXYNOS5_IRQ_MFC			IRQ_SPI(96)
@@ -309,7 +310,7 @@
 #define EXYNOS5_IRQ_PCM2		IRQ_SPI(104)
 #define EXYNOS5_IRQ_SPDIF		IRQ_SPI(105)
 #define EXYNOS5_IRQ_ADC0		IRQ_SPI(106)
-
+#define EXYNOS5_IRQ_ADC1		IRQ_SPI(107)
 #define EXYNOS5_IRQ_SATA_PHY		IRQ_SPI(108)
 #define EXYNOS5_IRQ_SATA_PMEMREQ	IRQ_SPI(109)
 #define EXYNOS5_IRQ_CAM_C		IRQ_SPI(110)
@@ -318,8 +319,9 @@
 #define EXYNOS5_IRQ_DP1_INTP1		IRQ_SPI(113)
 #define EXYNOS5_IRQ_CEC			IRQ_SPI(114)
 #define EXYNOS5_IRQ_SATA		IRQ_SPI(115)
-#define EXYNOS5_IRQ_NFCON		IRQ_SPI(116)
 
+#define EXYNOS5_IRQ_MCT_L0		IRQ_SPI(120)
+#define EXYNOS5_IRQ_MCT_L1		IRQ_SPI(121)
 #define EXYNOS5_IRQ_MMC44		IRQ_SPI(123)
 #define EXYNOS5_IRQ_MDMA1		IRQ_SPI(124)
 #define EXYNOS5_IRQ_FIMC_LITE0		IRQ_SPI(125)
@@ -327,7 +329,6 @@
 #define EXYNOS5_IRQ_RP_TIMER		IRQ_SPI(127)
 
 #define EXYNOS5_IRQ_PMU			COMBINER_IRQ(1, 2)
-#define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(1, 6)
 
 #define EXYNOS5_IRQ_SYSMMU_GSC0_0	COMBINER_IRQ(2, 0)
 #define EXYNOS5_IRQ_SYSMMU_GSC0_1	COMBINER_IRQ(2, 1)
@@ -338,6 +339,8 @@
 #define EXYNOS5_IRQ_SYSMMU_GSC3_0	COMBINER_IRQ(2, 6)
 #define EXYNOS5_IRQ_SYSMMU_GSC3_1	COMBINER_IRQ(2, 7)
 
+#define EXYNOS5_IRQ_SYSMMU_LITE2_0	COMBINER_IRQ(3, 0)
+#define EXYNOS5_IRQ_SYSMMU_LITE2_1	COMBINER_IRQ(3, 1)
 #define EXYNOS5_IRQ_SYSMMU_FIMD1_0	COMBINER_IRQ(3, 2)
 #define EXYNOS5_IRQ_SYSMMU_FIMD1_1	COMBINER_IRQ(3, 3)
 #define EXYNOS5_IRQ_SYSMMU_LITE0_0	COMBINER_IRQ(3, 4)
@@ -361,8 +364,8 @@
 
 #define EXYNOS5_IRQ_SYSMMU_ARM_0	COMBINER_IRQ(6, 0)
 #define EXYNOS5_IRQ_SYSMMU_ARM_1	COMBINER_IRQ(6, 1)
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_0	COMBINER_IRQ(6, 2)
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_1	COMBINER_IRQ(6, 3)
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_0	COMBINER_IRQ(6, 2)
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_1	COMBINER_IRQ(6, 3)
 #define EXYNOS5_IRQ_SYSMMU_RTIC_0	COMBINER_IRQ(6, 4)
 #define EXYNOS5_IRQ_SYSMMU_RTIC_1	COMBINER_IRQ(6, 5)
 #define EXYNOS5_IRQ_SYSMMU_SSS_0	COMBINER_IRQ(6, 6)
@@ -374,11 +377,9 @@
 #define EXYNOS5_IRQ_SYSMMU_MDMA1_1	COMBINER_IRQ(7, 3)
 #define EXYNOS5_IRQ_SYSMMU_TV_0		COMBINER_IRQ(7, 4)
 #define EXYNOS5_IRQ_SYSMMU_TV_1		COMBINER_IRQ(7, 5)
-#define EXYNOS5_IRQ_SYSMMU_GPSX_0	COMBINER_IRQ(7, 6)
-#define EXYNOS5_IRQ_SYSMMU_GPSX_1	COMBINER_IRQ(7, 7)
 
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_0	COMBINER_IRQ(8, 5)
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_1	COMBINER_IRQ(8, 6)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_0	COMBINER_IRQ(8, 5)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_1	COMBINER_IRQ(8, 6)
 
 #define EXYNOS5_IRQ_SYSMMU_DIS1_0	COMBINER_IRQ(9, 4)
 #define EXYNOS5_IRQ_SYSMMU_DIS1_1	COMBINER_IRQ(9, 5)
@@ -394,17 +395,24 @@
 #define EXYNOS5_IRQ_SYSMMU_DRC_0	COMBINER_IRQ(11, 6)
 #define EXYNOS5_IRQ_SYSMMU_DRC_1	COMBINER_IRQ(11, 7)
 
+#define EXYNOS5_IRQ_MDMA1_ABORT		COMBINER_IRQ(13, 1)
+
+#define EXYNOS5_IRQ_MDMA0_ABORT		COMBINER_IRQ(15, 3)
+
 #define EXYNOS5_IRQ_FIMD1_FIFO		COMBINER_IRQ(18, 4)
 #define EXYNOS5_IRQ_FIMD1_VSYNC		COMBINER_IRQ(18, 5)
 #define EXYNOS5_IRQ_FIMD1_SYSTEM	COMBINER_IRQ(18, 6)
 
+#define EXYNOS5_IRQ_ARMIOP_GIC		COMBINER_IRQ(19, 0)
+#define EXYNOS5_IRQ_ARMISP_GIC		COMBINER_IRQ(19, 1)
+#define EXYNOS5_IRQ_IOP_GIC		COMBINER_IRQ(19, 3)
+#define EXYNOS5_IRQ_ISP_GIC		COMBINER_IRQ(19, 4)
+
+#define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(22, 4)
+
 #define EXYNOS5_IRQ_EINT0		COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_L0		COMBINER_IRQ(23, 1)
-#define EXYNOS5_IRQ_MCT_L1		COMBINER_IRQ(23, 2)
 #define EXYNOS5_IRQ_MCT_G0		COMBINER_IRQ(23, 3)
 #define EXYNOS5_IRQ_MCT_G1		COMBINER_IRQ(23, 4)
-#define EXYNOS5_IRQ_MCT_G2		COMBINER_IRQ(23, 5)
-#define EXYNOS5_IRQ_MCT_G3		COMBINER_IRQ(23, 6)
 
 #define EXYNOS5_IRQ_EINT1		COMBINER_IRQ(24, 0)
 #define EXYNOS5_IRQ_SYSMMU_LITE1_0	COMBINER_IRQ(24, 1)
@@ -435,7 +443,7 @@
 
 #define EXYNOS5_MAX_COMBINER_NR		32
 
-#define EXYNOS5_IRQ_GPIO1_NR_GROUPS	13
+#define EXYNOS5_IRQ_GPIO1_NR_GROUPS	14
 #define EXYNOS5_IRQ_GPIO2_NR_GROUPS	9
 #define EXYNOS5_IRQ_GPIO3_NR_GROUPS	5
 #define EXYNOS5_IRQ_GPIO4_NR_GROUPS	1

arch/arm/mach-exynos/include/mach/map.h

@@ -81,8 +81,8 @@
 
 #define EXYNOS4_PA_GIC_CPU		0x10480000
 #define EXYNOS4_PA_GIC_DIST		0x10490000
-#define EXYNOS5_PA_GIC_CPU		0x10480000
-#define EXYNOS5_PA_GIC_DIST		0x10490000
+#define EXYNOS5_PA_GIC_CPU		0x10482000
+#define EXYNOS5_PA_GIC_DIST		0x10481000
 
 #define EXYNOS4_PA_COREPERI		0x10500000
 #define EXYNOS4_PA_TWD			0x10500600

arch/arm/mach-exynos/include/mach/regs-clock.h

@@ -322,6 +322,8 @@
 #define EXYNOS5_CLKSRC_CDREX			EXYNOS_CLKREG(0x20200)
 #define EXYNOS5_CLKDIV_CDREX			EXYNOS_CLKREG(0x20500)
 
+#define EXYNOS5_PLL_DIV2_SEL			EXYNOS_CLKREG(0x20A24)
+
 #define EXYNOS5_EPLL_LOCK			EXYNOS_CLKREG(0x10030)
 
 #define EXYNOS5_EPLLCON0_LOCKED_SHIFT		(29)

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -43,6 +43,10 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"exynos4210-uart.2", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
 				"exynos4210-uart.3", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0),
+				"s3c2440-i2c.0", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
+				"s3c2440-i2c.1", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),

arch/arm/mach-exynos/mct.c

@@ -388,6 +388,7 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 {
 	struct mct_clock_event_device *mevt;
 	unsigned int cpu = smp_processor_id();
+	int mct_lx_irq;
 
 	mevt = this_cpu_ptr(&percpu_mct_tick);
 	mevt->evt = evt;
@@ -414,14 +415,18 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 
 	if (mct_int_type == MCT_INT_SPI) {
 		if (cpu == 0) {
+			mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 :
+						EXYNOS5_IRQ_MCT_L0;
 			mct_tick0_event_irq.dev_id = mevt;
-			evt->irq = EXYNOS4_IRQ_MCT_L0;
-			setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq);
+			evt->irq = mct_lx_irq;
+			setup_irq(mct_lx_irq, &mct_tick0_event_irq);
 		} else {
+			mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 :
+						EXYNOS5_IRQ_MCT_L1;
 			mct_tick1_event_irq.dev_id = mevt;
-			evt->irq = EXYNOS4_IRQ_MCT_L1;
-			setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq);
-			irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1));
+			evt->irq = mct_lx_irq;
+			setup_irq(mct_lx_irq, &mct_tick1_event_irq);
+			irq_set_affinity(mct_lx_irq, cpumask_of(1));
 		}
 	} else {
 		enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
@@ -473,7 +478,7 @@ static void __init exynos4_timer_resources(void)
 
 static void __init exynos4_timer_init(void)
 {
-	if (soc_is_exynos4210())
+	if ((soc_is_exynos4210()) || (soc_is_exynos5250()))
 		mct_int_type = MCT_INT_SPI;
 	else
 		mct_int_type = MCT_INT_PPI;

arch/arm/mach-exynos/pm.c

@@ -275,7 +275,7 @@ static void exynos4_restore_pll(void)
 
 static struct subsys_interface exynos4_pm_interface = {
 	.name		= "exynos4_pm",
-	.subsys		= &exynos4_subsys,
+	.subsys		= &exynos_subsys,
 	.add_dev	= exynos4_pm_add,
 };
 

arch/arm/plat-samsung/include/plat/cpu.h

@@ -202,7 +202,7 @@ extern struct bus_type s3c2443_subsys;
 extern struct bus_type s3c6410_subsys;
 extern struct bus_type s5p64x0_subsys;
 extern struct bus_type s5pv210_subsys;
-extern struct bus_type exynos4_subsys;
+extern struct bus_type exynos_subsys;
 
 extern void (*s5pc1xx_idle)(void);
 

arch/arm/plat-samsung/include/plat/s5p-clock.h

@@ -32,8 +32,10 @@ extern struct clk clk_48m;
 extern struct clk s5p_clk_27m;
 extern struct clk clk_fout_apll;
 extern struct clk clk_fout_bpll;
+extern struct clk clk_fout_bpll_div2;
 extern struct clk clk_fout_cpll;
 extern struct clk clk_fout_mpll;
+extern struct clk clk_fout_mpll_div2;
 extern struct clk clk_fout_epll;
 extern struct clk clk_fout_dpll;
 extern struct clk clk_fout_vpll;
@@ -42,8 +44,10 @@ extern struct clk clk_vpll;
 
 extern struct clksrc_sources clk_src_apll;
 extern struct clksrc_sources clk_src_bpll;
+extern struct clksrc_sources clk_src_bpll_fout;
 extern struct clksrc_sources clk_src_cpll;
 extern struct clksrc_sources clk_src_mpll;
+extern struct clksrc_sources clk_src_mpll_fout;
 extern struct clksrc_sources clk_src_epll;
 extern struct clksrc_sources clk_src_dpll;
 

arch/arm/plat-samsung/s5p-clock.c

@@ -67,6 +67,11 @@ struct clk clk_fout_bpll = {
 	.id		= -1,
 };
 
+struct clk clk_fout_bpll_div2 = {
+	.name		= "fout_bpll_div2",
+	.id		= -1,
+};
+
 /* CPLL clock output */
 
 struct clk clk_fout_cpll = {
@@ -82,6 +87,11 @@ struct clk clk_fout_mpll = {
 	.id		= -1,
 };
 
+struct clk clk_fout_mpll_div2 = {
+	.name		= "fout_mpll_div2",
+	.id		= -1,
+};
+
 /* EPLL clock output */
 struct clk clk_fout_epll = {
 	.name		= "fout_epll",
@@ -125,6 +135,16 @@ struct clksrc_sources clk_src_bpll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_bpll_list),
 };
 
+static struct clk *clk_src_bpll_fout_list[] = {
+	[0] = &clk_fout_bpll_div2,
+	[1] = &clk_fout_bpll,
+};
+
+struct clksrc_sources clk_src_bpll_fout = {
+	.sources	= clk_src_bpll_fout_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_bpll_fout_list),
+};
+
 /* Possible clock sources for CPLL Mux */
 static struct clk *clk_src_cpll_list[] = {
 	[0] = &clk_fin_cpll,
@@ -147,6 +167,16 @@ struct clksrc_sources clk_src_mpll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
 };
 
+static struct clk *clk_src_mpll_fout_list[] = {
+	[0] = &clk_fout_mpll_div2,
+	[1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll_fout = {
+	.sources	= clk_src_mpll_fout_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_fout_list),
+};
+
 /* Possible clock sources for EPLL Mux */
 static struct clk *clk_src_epll_list[] = {
 	[0] = &clk_fin_epll,

drivers/gpio/gpio-samsung.c

@@ -2452,6 +2452,12 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = {
 			.ngpio	= EXYNOS5_GPIO_C3_NR,
 			.label	= "GPC3",
 		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPC4(0),
+			.ngpio	= EXYNOS5_GPIO_C4_NR,
+			.label	= "GPC4",
+		},
 	}, {
 		.chip	= {
 			.base	= EXYNOS5_GPD0(0),
@@ -2878,8 +2884,11 @@ static __init int samsung_gpiolib_init(void)
 			goto err_ioremap1;
 		}
 
+		/* need to set base address for gpc4 */
+		exynos5_gpios_1[11].base = gpio_base1 + 0x2E0;
+
 		/* need to set base address for gpx */
-		chip = &exynos5_gpios_1[20];
+		chip = &exynos5_gpios_1[21];
 		gpx_base = gpio_base1 + 0xC00;
 		for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
 			chip->base = gpx_base;