Commit 6d7b42a4 authored by Jean-Christophe PLAGNIOL-VILLARD's avatar Jean-Christophe PLAGNIOL-VILLARD Committed by Artem Bityutskiy

mtd: fsmc_nand: pass the ale and cmd resource via resource

Do not use the platform_data to pass resource and be smart in the drivers.
Just pass it via resource

Switch to devm_request_and_ioremap at the sametime
Signed-off-by: default avatarJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Reviewed-By: default avatarVipin Kumar <vipin.kumar@st.com>
Signed-off-by: default avatarArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
parent fc05d5a3
...@@ -3,9 +3,7 @@ ...@@ -3,9 +3,7 @@
Required properties: Required properties:
- compatible : "st,spear600-fsmc-nand" - compatible : "st,spear600-fsmc-nand"
- reg : Address range of the mtd chip - reg : Address range of the mtd chip
- reg-names: Should contain the reg names "fsmc_regs" and "nand_data" - reg-names: Should contain the reg names "fsmc_regs", "nand_data", "nand_addr" and "nand_cmd"
- st,ale-off : Chip specific offset to ALE
- st,cle-off : Chip specific offset to CLE
Optional properties: Optional properties:
- bank-width : Width (in bytes) of the device. If not present, the width - bank-width : Width (in bytes) of the device. If not present, the width
...@@ -19,10 +17,10 @@ Example: ...@@ -19,10 +17,10 @@ Example:
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
reg = <0xd1800000 0x1000 /* FSMC Register */ reg = <0xd1800000 0x1000 /* FSMC Register */
0xd2000000 0x4000>; /* NAND Base */ 0xd2000000 0x0010 /* NAND Base DATA */
reg-names = "fsmc_regs", "nand_data"; 0xd2020000 0x0010 /* NAND Base ADDR */
st,ale-off = <0x20000>; 0xd2010000 0x0010>; /* NAND Base CMD */
st,cle-off = <0x10000>; reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
bank-width = <1>; bank-width = <1>;
nand-skip-bbtscan; nand-skip-bbtscan;
......
...@@ -104,15 +104,15 @@ fsmc: flash@b0000000 { ...@@ -104,15 +104,15 @@ fsmc: flash@b0000000 {
compatible = "st,spear600-fsmc-nand"; compatible = "st,spear600-fsmc-nand";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
reg = <0xb0000000 0x1000 /* FSMC Register */ reg = <0xb0000000 0x1000 /* FSMC Register*/
0xb0800000 0x0010>; /* NAND Base */ 0xb0800000 0x0010 /* NAND Base DATA */
reg-names = "fsmc_regs", "nand_data"; 0xb0820000 0x0010 /* NAND Base ADDR */
0xb0810000 0x0010>; /* NAND Base CMD */
reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
interrupts = <0 20 0x4 interrupts = <0 20 0x4
0 21 0x4 0 21 0x4
0 22 0x4 0 22 0x4
0 23 0x4>; 0 23 0x4>;
st,ale-off = <0x20000>;
st,cle-off = <0x10000>;
status = "disabled"; status = "disabled";
}; };
......
...@@ -38,10 +38,10 @@ fsmc: flash@94000000 { ...@@ -38,10 +38,10 @@ fsmc: flash@94000000 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
reg = <0x94000000 0x1000 /* FSMC Register */ reg = <0x94000000 0x1000 /* FSMC Register */
0x80000000 0x0010>; /* NAND Base */ 0x80000000 0x0010 /* NAND Base DATA */
reg-names = "fsmc_regs", "nand_data"; 0x80020000 0x0010 /* NAND Base ADDR */
st,ale-off = <0x20000>; 0x80010000 0x0010>; /* NAND Base CMD */
st,cle-off = <0x10000>; reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
status = "disabled"; status = "disabled";
}; };
......
...@@ -32,10 +32,10 @@ fsmc: flash@44000000 { ...@@ -32,10 +32,10 @@ fsmc: flash@44000000 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
reg = <0x44000000 0x1000 /* FSMC Register */ reg = <0x44000000 0x1000 /* FSMC Register */
0x40000000 0x0010>; /* NAND Base */ 0x40000000 0x0010 /* NAND Base DATA */
reg-names = "fsmc_regs", "nand_data"; 0x40020000 0x0010 /* NAND Base ADDR */
st,ale-off = <0x10000>; 0x40010000 0x0010>; /* NAND Base CMD */
st,cle-off = <0x20000>; reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
status = "disabled"; status = "disabled";
}; };
......
...@@ -38,10 +38,10 @@ fsmc: flash@4c000000 { ...@@ -38,10 +38,10 @@ fsmc: flash@4c000000 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
reg = <0x4c000000 0x1000 /* FSMC Register */ reg = <0x4c000000 0x1000 /* FSMC Register */
0x50000000 0x0010>; /* NAND Base */ 0x50000000 0x0010 /* NAND Base DATA */
reg-names = "fsmc_regs", "nand_data"; 0x50020000 0x0010 /* NAND Base ADDR */
st,ale-off = <0x20000>; 0x50010000 0x0010>; /* NAND Base CMD */
st,cle-off = <0x10000>; reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
status = "disabled"; status = "disabled";
}; };
......
...@@ -67,10 +67,10 @@ fsmc: flash@d1800000 { ...@@ -67,10 +67,10 @@ fsmc: flash@d1800000 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
reg = <0xd1800000 0x1000 /* FSMC Register */ reg = <0xd1800000 0x1000 /* FSMC Register */
0xd2000000 0x4000>; /* NAND Base */ 0xd2000000 0x0010 /* NAND Base DATA */
reg-names = "fsmc_regs", "nand_data"; 0xd2020000 0x0010 /* NAND Base ADDR */
st,ale-off = <0x20000>; 0xd2010000 0x0010>; /* NAND Base CMD */
st,cle-off = <0x10000>; reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
status = "disabled"; status = "disabled";
}; };
......
...@@ -251,6 +251,18 @@ static struct resource rtc_resources[] = { ...@@ -251,6 +251,18 @@ static struct resource rtc_resources[] = {
* but these are not yet used by the driver. * but these are not yet used by the driver.
*/ */
static struct resource fsmc_resources[] = { static struct resource fsmc_resources[] = {
{
.name = "nand_addr",
.start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE,
.end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "nand_cmd",
.start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE,
.end = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
{ {
.name = "nand_data", .name = "nand_data",
.start = U300_NAND_CS0_PHYS_BASE, .start = U300_NAND_CS0_PHYS_BASE,
...@@ -1496,8 +1508,6 @@ static struct fsmc_nand_platform_data nand_platform_data = { ...@@ -1496,8 +1508,6 @@ static struct fsmc_nand_platform_data nand_platform_data = {
.nr_partitions = ARRAY_SIZE(u300_partitions), .nr_partitions = ARRAY_SIZE(u300_partitions),
.options = NAND_SKIP_BBTSCAN, .options = NAND_SKIP_BBTSCAN,
.width = FSMC_NAND_BW8, .width = FSMC_NAND_BW8,
.ale_off = PLAT_NAND_ALE,
.cle_off = PLAT_NAND_CLE,
}; };
static struct platform_device nand_device = { static struct platform_device nand_device = {
......
...@@ -876,8 +876,6 @@ static int __devinit fsmc_nand_probe_config_dt(struct platform_device *pdev, ...@@ -876,8 +876,6 @@ static int __devinit fsmc_nand_probe_config_dt(struct platform_device *pdev,
return -EINVAL; return -EINVAL;
} }
} }
of_property_read_u32(np, "st,ale-off", &pdata->ale_off);
of_property_read_u32(np, "st,cle-off", &pdata->cle_off);
if (of_get_property(np, "nand-skip-bbtscan", NULL)) if (of_get_property(np, "nand-skip-bbtscan", NULL))
pdata->options = NAND_SKIP_BBTSCAN; pdata->options = NAND_SKIP_BBTSCAN;
...@@ -935,41 +933,28 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) ...@@ -935,41 +933,28 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
if (!res) if (!res)
return -EINVAL; return -EINVAL;
if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), host->data_va = devm_request_and_ioremap(&pdev->dev, res);
pdev->name)) {
dev_err(&pdev->dev, "Failed to get memory data resourse\n");
return -ENOENT;
}
host->data_pa = (dma_addr_t)res->start;
host->data_va = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
if (!host->data_va) { if (!host->data_va) {
dev_err(&pdev->dev, "data ioremap failed\n"); dev_err(&pdev->dev, "data ioremap failed\n");
return -ENOMEM; return -ENOMEM;
} }
host->data_pa = (dma_addr_t)res->start;
if (!devm_request_mem_region(&pdev->dev, res->start + pdata->ale_off, res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
resource_size(res), pdev->name)) { if (!res)
dev_err(&pdev->dev, "Failed to get memory ale resourse\n"); return -EINVAL;
return -ENOENT;
}
host->addr_va = devm_ioremap(&pdev->dev, res->start + pdata->ale_off, host->addr_va = devm_request_and_ioremap(&pdev->dev, res);
resource_size(res));
if (!host->addr_va) { if (!host->addr_va) {
dev_err(&pdev->dev, "ale ioremap failed\n"); dev_err(&pdev->dev, "ale ioremap failed\n");
return -ENOMEM; return -ENOMEM;
} }
if (!devm_request_mem_region(&pdev->dev, res->start + pdata->cle_off, res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
resource_size(res), pdev->name)) { if (!res)
dev_err(&pdev->dev, "Failed to get memory cle resourse\n"); return -EINVAL;
return -ENOENT;
}
host->cmd_va = devm_ioremap(&pdev->dev, res->start + pdata->cle_off, host->cmd_va = devm_request_and_ioremap(&pdev->dev, res);
resource_size(res));
if (!host->cmd_va) { if (!host->cmd_va) {
dev_err(&pdev->dev, "ale ioremap failed\n"); dev_err(&pdev->dev, "ale ioremap failed\n");
return -ENOMEM; return -ENOMEM;
...@@ -979,14 +964,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) ...@@ -979,14 +964,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
if (!res) if (!res)
return -EINVAL; return -EINVAL;
if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), host->regs_va = devm_request_and_ioremap(&pdev->dev, res);
pdev->name)) {
dev_err(&pdev->dev, "Failed to get memory regs resourse\n");
return -ENOENT;
}
host->regs_va = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
if (!host->regs_va) { if (!host->regs_va) {
dev_err(&pdev->dev, "regs ioremap failed\n"); dev_err(&pdev->dev, "regs ioremap failed\n");
return -ENOMEM; return -ENOMEM;
......
...@@ -155,9 +155,6 @@ struct fsmc_nand_platform_data { ...@@ -155,9 +155,6 @@ struct fsmc_nand_platform_data {
unsigned int width; unsigned int width;
unsigned int bank; unsigned int bank;
/* CLE, ALE offsets */
unsigned int cle_off;
unsigned int ale_off;
enum access_mode mode; enum access_mode mode;
void (*select_bank)(uint32_t bank, uint32_t busw); void (*select_bank)(uint32_t bank, uint32_t busw);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment