Skip to content

L
linux
Commit 6da2e9ba authored by Andi Kleen's avatar Andi Kleen Committed by Linus Torvalds
Browse files
Options

[PATCH] x86-64: add apic={verbose,quiet,debug} 

Ported from i386

Allow to quieten apic boot output on the command line using
apic={verbose,debug,quiet}

Make it quiet by default

Add extra #define for making apic print functions __init or not
__init (for easier debugging)
Signed-off-by: default avatarAndi Kleen <ak@suse.de>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 66c6d67d
Hide whitespace changes
Inline Side-by-side
Showing with 109 additions and 66 deletions
arch/x86_64/kernel/apic.c
View file @ 6da2e9ba
......@@ -33,6 +33,8 @@
#include <asm/mpspec.h>
#include <asm/pgalloc.h>
int apic_verbosity;
int disable_apic_timer __initdata;
/* Using APIC to generate smp_local_timer_interrupt? */
......@@ -123,7 +125,7 @@ void __init connect_bsp_APIC(void)
* PIC mode, enable APIC mode in the IMCR, i.e.
* connect BSP's local APIC to INT and NMI lines.
*/
printk(KERN_INFO "leaving PIC mode, enabling APIC mode.\n");
apic_printk(APIC_VERBOSE, "leaving PIC mode, enabling APIC mode.\n");
outb(0x70, 0x22);
outb(0x01, 0x23);
}
......@@ -138,7 +140,7 @@ void disconnect_bsp_APIC(void)
* interrupts, including IPIs, won't work beyond
* this point! The only exception are INIT IPIs.
*/
printk(KERN_INFO "disabling APIC mode, entering PIC mode.\n");
apic_printk(APIC_QUIET, "disabling APIC mode, entering PIC mode.\n");
outb(0x70, 0x22);
outb(0x00, 0x23);
}
......@@ -172,10 +174,10 @@ int __init verify_local_APIC(void)
* The version register is read-only in a real APIC.
*/
reg0 = apic_read(APIC_LVR);
Dprintk("Getting VERSION: %x\n", reg0);
apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
reg1 = apic_read(APIC_LVR);
Dprintk("Getting VERSION: %x\n", reg1);
apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
/*
* The two version reads above should print the same
......@@ -199,10 +201,10 @@ int __init verify_local_APIC(void)
* The ID register is read/write in a real APIC.
*/
reg0 = apic_read(APIC_ID);
Dprintk("Getting ID: %x\n", reg0);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
reg1 = apic_read(APIC_ID);
Dprintk("Getting ID: %x\n", reg1);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
apic_write(APIC_ID, reg0);
if (reg1 != (reg0 ^ APIC_ID_MASK))
return 0;
......@@ -213,9 +215,9 @@ int __init verify_local_APIC(void)
* compatibility mode, but most boxes are anymore.
*/
reg0 = apic_read(APIC_LVT0);
Dprintk("Getting LVT0: %x\n", reg0);
apic_printk(APIC_DEBUG,"Getting LVT0: %x\n", reg0);
reg1 = apic_read(APIC_LVT1);
Dprintk("Getting LVT1: %x\n", reg1);
apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
return 1;
}
......@@ -227,7 +229,7 @@ void __init sync_Arb_IDs(void)
*/
apic_wait_icr_idle();
Dprintk("Synchronizing Arb IDs.\n");
apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
| APIC_DM_INIT);
}
......@@ -388,10 +390,10 @@ void __init setup_local_APIC (void)
value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
if (!smp_processor_id() && (pic_mode || !value)) {
value = APIC_DM_EXTINT;
Dprintk(KERN_INFO "enabled ExtINT on CPU#%d\n", smp_processor_id());
apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", smp_processor_id());
} else {
value = APIC_DM_EXTINT | APIC_LVT_MASKED;
Dprintk(KERN_INFO "masked ExtINT on CPU#%d\n", smp_processor_id());
apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", smp_processor_id());
}
apic_write_around(APIC_LVT0, value);
......@@ -407,12 +409,11 @@ void __init setup_local_APIC (void)
apic_write_around(APIC_LVT1, value);
if (APIC_INTEGRATED(ver) && !esr_disable) { /* !82489DX */
unsigned oldvalue;
maxlvt = get_maxlvt();
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
value = apic_read(APIC_ESR);
Dprintk("ESR value before enabling vector: %08x\n", value);
oldvalue = apic_read(APIC_ESR);
value = ERROR_APIC_VECTOR; // enables sending errors
apic_write_around(APIC_LVTERR, value);
/*
......@@ -421,7 +422,10 @@ void __init setup_local_APIC (void)
if (maxlvt > 3)
apic_write(APIC_ESR, 0);
value = apic_read(APIC_ESR);
Dprintk("ESR value after enabling vector: %08x\n", value);
if (value != oldvalue)
apic_printk(APIC_VERBOSE,
"ESR value after enabling vector: %08x, after %08x\n",
oldvalue, value);
} else {
if (esr_disable)
/*
......@@ -430,9 +434,9 @@ void __init setup_local_APIC (void)
* ESR disabled - we can't do anything useful with the
* errors anyway - mbligh
*/
printk("Leaving ESR disabled.\n");
apic_printk(APIC_DEBUG, "Leaving ESR disabled.\n");
else
printk("No ESR for 82489DX.\n");
apic_printk(APIC_DEBUG, "No ESR for 82489DX.\n");
}
nmi_watchdog_default();
......@@ -564,6 +568,21 @@ static void apic_pm_activate(void) { }
#endif /* CONFIG_PM */
static int __init apic_set_verbosity(char *str)
{
if (strcmp("debug", str) == 0)
apic_verbosity = APIC_DEBUG;
else if (strcmp("verbose", str) == 0)
apic_verbosity = APIC_VERBOSE;
else
printk(KERN_WARNING "APIC Verbosity level %s not recognised"
" use apic=verbose or apic=debug", str);
return 0;
}
__setup("apic=", apic_set_verbosity);
/*
* Detect and enable local APICs on non-SMP boards.
* Original code written by Keir Fraser.
......@@ -599,7 +618,7 @@ void __init init_apic_mappings(void)
apic_phys = mp_lapic_addr;
set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
Dprintk("mapped APIC to %16lx (%16lx)\n", APIC_BASE, apic_phys);
apic_printk(APIC_VERBOSE,"mapped APIC to %16lx (%16lx)\n", APIC_BASE, apic_phys);
/*
* Fetch the APIC ID of the BSP in case we have a
......@@ -621,7 +640,7 @@ void __init init_apic_mappings(void)
ioapic_phys = __pa(ioapic_phys);
}
set_fixmap_nocache(idx, ioapic_phys);
Dprintk("mapped IOAPIC to %016lx (%016lx)\n",
apic_printk(APIC_VERBOSE,"mapped IOAPIC to %016lx (%016lx)\n",
__fix_to_virt(idx), ioapic_phys);
idx++;
}
......
arch/x86_64/kernel/io_apic.c
View file @ 6da2e9ba
......@@ -36,6 +36,8 @@
#include <asm/desc.h>
#include <asm/proto.h>
#define __apicdebuginit __init
int sis_apic_bug; /* not actually supported, dummy for compile */
#undef APIC_LOCKUP_DEBUG
......@@ -292,13 +294,13 @@ static int __init ioapic_pirq_setup(char *str)
pirq_entries[i] = -1;
pirqs_enabled = 1;
printk(KERN_INFO "PIRQ redirection, working around broken MP-BIOS.\n");
apic_printk(APIC_VERBOSE, "PIRQ redirection, working around broken MP-BIOS.\n");
max = MAX_PIRQS;
if (ints[0] < MAX_PIRQS)
max = ints[0];
for (i = 0; i < max; i++) {
printk(KERN_DEBUG "... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
apic_printk(APIC_VERBOSE, "... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
/*
* PIRQs are mapped upside down, usually.
*/
......@@ -357,10 +359,10 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
{
int apic, i, best_guess = -1;
Dprintk("querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
bus, slot, pin);
if (mp_bus_id_to_pci_bus[bus] == -1) {
printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
return -1;
}
for (i = 0; i < mp_irq_entries; i++) {
......@@ -402,7 +404,7 @@ static int __init EISA_ELCR(unsigned int irq)
unsigned int port = 0x4d0 + (irq >> 3);
return (inb(port) >> (irq & 7)) & 1;
}
printk(KERN_INFO "Broken MPtable reports ISA irq %d\n", irq);
apic_printk(APIC_VERBOSE, "Broken MPtable reports ISA irq %d\n", irq);
return 0;
}
......@@ -625,10 +627,10 @@ static int pin_2_irq(int idx, int apic, int pin)
if ((pin >= 16) && (pin <= 23)) {
if (pirq_entries[pin-16] != -1) {
if (!pirq_entries[pin-16]) {
printk(KERN_DEBUG "disabling PIRQ%d\n", pin-16);
apic_printk(APIC_VERBOSE, "disabling PIRQ%d\n", pin-16);
} else {
irq = pirq_entries[pin-16];
printk(KERN_DEBUG "using PIRQ%d -> IRQ %d\n",
apic_printk(APIC_VERBOSE, "using PIRQ%d -> IRQ %d\n",
pin-16, irq);
}
}
......@@ -719,7 +721,7 @@ void __init setup_IO_APIC_irqs(void)
int apic, pin, idx, irq, first_notcon = 1, vector;
unsigned long flags;
printk(KERN_DEBUG "init IO_APIC IRQs\n");
apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
for (apic = 0; apic < nr_ioapics; apic++) {
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
......@@ -737,10 +739,10 @@ void __init setup_IO_APIC_irqs(void)
idx = find_irq_entry(apic,pin,mp_INT);
if (idx == -1) {
if (first_notcon) {
printk(KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin);
apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin);
first_notcon = 0;
} else
printk(", %d-%d", mp_ioapics[apic].mpc_apicid, pin);
apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin);
continue;
}
......@@ -775,7 +777,7 @@ void __init setup_IO_APIC_irqs(void)
}
if (!first_notcon)
printk(" not connected.\n");
apic_printk(APIC_VERBOSE," not connected.\n");
}
/*
......@@ -825,13 +827,9 @@ void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
void __init UNEXPECTED_IO_APIC(void)
{
#if 0
printk(KERN_WARNING " WARNING: unexpected IO-APIC, please mail\n");
printk(KERN_WARNING " to linux-smp@vger.kernel.org\n");
#endif
}
void __init print_IO_APIC(void)
void __apicdebuginit print_IO_APIC(void)
{
int apic, i;
union IO_APIC_reg_00 reg_00;
......@@ -839,7 +837,10 @@ void __init print_IO_APIC(void)
union IO_APIC_reg_02 reg_02;
unsigned long flags;
printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
if (apic_verbosity == APIC_QUIET)
return;
printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
for (i = 0; i < nr_ioapics; i++)
printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
......@@ -955,11 +956,14 @@ void __init print_IO_APIC(void)
return;
}
static void print_APIC_bitfield (int base)
static __apicdebuginit void print_APIC_bitfield (int base)
{
unsigned int v;
int i, j;
if (apic_verbosity == APIC_QUIET)
return;
printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
for (i = 0; i < 8; i++) {
v = apic_read(base + i*0x10);
......@@ -973,10 +977,13 @@ static void print_APIC_bitfield (int base)
}
}
void /*__init*/ print_local_APIC(void * dummy)
void __apicdebuginit print_local_APIC(void * dummy)
{
unsigned int v, ver, maxlvt;
if (apic_verbosity == APIC_QUIET)
return;
printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
v = apic_read(APIC_ID);
......@@ -1058,12 +1065,15 @@ void print_all_local_APICs (void)
on_each_cpu(print_local_APIC, NULL, 1, 1);
}
void /*__init*/ print_PIC(void)
void __apicdebuginit print_PIC(void)
{
extern spinlock_t i8259A_lock;
unsigned int v;
unsigned long flags;
if (apic_verbosity == APIC_QUIET)
return;
printk(KERN_DEBUG "\nprinting PIC contents\n");
spin_lock_irqsave(&i8259A_lock, flags);
......@@ -1160,9 +1170,9 @@ static void __init setup_ioapic_ids_from_mpc (void)
old_id = mp_ioapics[apic].mpc_apicid;
if (mp_ioapics[apic].mpc_apicid >= 0xf) {
printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
apic_printk(APIC_QUIET,KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
apic, mp_ioapics[apic].mpc_apicid);
printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
apic_printk(APIC_QUIET,KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
reg_00.bits.ID);
mp_ioapics[apic].mpc_apicid = reg_00.bits.ID;
}
......@@ -1205,7 +1215,7 @@ static void __init setup_ioapic_ids_from_mpc (void)
* Read the right value from the MPC table and
* write it into the ID register.
*/
printk(KERN_INFO "...changing IO-APIC physical APIC ID to %d ...",
apic_printk(APIC_VERBOSE,KERN_INFO "...changing IO-APIC physical APIC ID to %d ...",
mp_ioapics[apic].mpc_apicid);
reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
......@@ -1222,7 +1232,7 @@ static void __init setup_ioapic_ids_from_mpc (void)
if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
panic("could not set ID!\n");
else
printk(" ok.\n");
apic_printk(APIC_VERBOSE," ok.\n");
}
}
......@@ -1671,7 +1681,7 @@ static inline void check_timer(void)
pin1 = find_isa_irq_pin(0, mp_INT);
pin2 = find_isa_irq_pin(0, mp_ExtINT);
printk(KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector, pin1, pin2);
apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector, pin1, pin2);
if (pin1 != -1) {
/*
......@@ -1689,12 +1699,12 @@ static inline void check_timer(void)
return;
}
clear_IO_APIC_pin(0, pin1);
printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to IO-APIC\n");
apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not connected to IO-APIC\n");
}
printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
if (pin2 != -1) {
printk("\n..... (found pin %d) ...", pin2);
apic_printk(APIC_VERBOSE,"\n..... (found pin %d) ...", pin2);
/*
* legacy devices should be connected to IO APIC #0
*/
......@@ -1720,7 +1730,7 @@ static inline void check_timer(void)
nmi_watchdog = 0;
}
printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
disable_8259A_irq(0);
irq_desc[0].handler = &lapic_irq_type;
......@@ -1728,13 +1738,13 @@ static inline void check_timer(void)
enable_8259A_irq(0);
if (timer_irq_works()) {
printk(" works.\n");
apic_printk(APIC_QUIET, " works.\n");
return;
}
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
printk(" failed.\n");
apic_printk(APIC_VERBOSE," failed.\n");
printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
init_8259A(0);
make_8259A_irq(0);
......@@ -1743,10 +1753,10 @@ static inline void check_timer(void)
unlock_ExtINT_logic();
if (timer_irq_works()) {
printk(" works.\n");
apic_printk(APIC_VERBOSE," works.\n");
return;
}
printk(" failed :(.\n");
apic_printk(APIC_VERBOSE," failed :(.\n");
panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
}
......@@ -1768,7 +1778,7 @@ void __init setup_IO_APIC(void)
else
io_apic_irqs = ~PIC_IRQS;
printk("ENABLING IO-APIC IRQs\n");
apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
/*
* Set up the IO-APIC IRQ routing table.
......@@ -1815,7 +1825,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
spin_unlock_irqrestore(&ioapic_lock, flags);
if (apic_id >= IO_APIC_MAX_ID) {
printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
apic_printk(APIC_QUIET, KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
"%d\n", ioapic, apic_id, reg_00.bits.ID);
apic_id = reg_00.bits.ID;
}
......@@ -1834,7 +1844,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
if (i == IO_APIC_MAX_ID)
panic("Max apic_id exceeded!\n");
printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
apic_printk(APIC_VERBOSE, KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
"trying %d\n", ioapic, apic_id, i);
apic_id = i;
......@@ -1855,7 +1865,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
}
printk(KERN_INFO "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
apic_printk(APIC_VERBOSE,KERN_INFO "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
return apic_id;
}
......@@ -1893,7 +1903,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
unsigned long flags;
if (!IO_APIC_IRQ(irq)) {
printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
ioapic);
return -EINVAL;
}
......@@ -1921,7 +1931,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
entry.vector = assign_irq_vector(irq);
printk(KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
"IRQ %d Mode:%i Active:%i)\n", ioapic,
mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
edge_level, active_high_low);
......
include/asm-x86_64/apic.h
View file @ 6da2e9ba
......@@ -7,15 +7,29 @@
#include <asm/apicdef.h>
#include <asm/system.h>
#ifdef CONFIG_X86_LOCAL_APIC
#define Dprintk(x...)
#define APIC_DEBUG 0
/*
* Debugging macros
*/
#define APIC_QUIET 0
#define APIC_VERBOSE 1
#define APIC_DEBUG 2
#if APIC_DEBUG
#define Dprintk(x...) printk(x)
#else
#define Dprintk(x...)
#endif
extern int apic_verbosity;
/*
* Define the default level of output to be very little
* This can be turned up by using apic=verbose for more
* information and apic=debug for _lots_ of information.
* apic_verbosity is defined in apic.c
*/
#define apic_printk(v, s, a...) do { \
if ((v) <= apic_verbosity) \
printk(s, ##a); \
} while (0)
#ifdef CONFIG_X86_LOCAL_APIC
struct pt_regs;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7