Commit 6da5ce17 authored by Sascha Hauer's avatar Sascha Hauer

Merge branches 'cleanups/assorted' and 'cleanups/mm-tzic' into imx-cleanup

Conflicts:
	arch/arm/mach-mx5/Makefile
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
......@@ -4,7 +4,6 @@
# Object file lists.
obj-y := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
obj-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
......
/*
* Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Create static mapping between physical to virtual memory.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-v3.h>
#include <mach/irqs.h>
/*
* Define the MX50 memory map.
*/
static struct map_desc mx50_io_desc[] __initdata = {
imx_map_entry(MX50, TZIC, MT_DEVICE),
imx_map_entry(MX50, SPBA0, MT_DEVICE),
imx_map_entry(MX50, AIPS1, MT_DEVICE),
imx_map_entry(MX50, AIPS2, MT_DEVICE),
};
/*
* This function initializes the memory map. It is called during the
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
void __init mx50_map_io(void)
{
iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
}
void __init imx50_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX50);
mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
}
void __init mx50_init_irq(void)
{
tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
}
void __init imx50_soc_init(void)
{
/* i.mx50 has the i.mx31 type gpio */
mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
}
......@@ -21,12 +21,22 @@
#include <mach/devices-common.h>
#include <mach/iomux-v3.h>
/*
* Define the MX50 memory map.
*/
static struct map_desc mx50_io_desc[] __initdata = {
imx_map_entry(MX50, TZIC, MT_DEVICE),
imx_map_entry(MX50, SPBA0, MT_DEVICE),
imx_map_entry(MX50, AIPS1, MT_DEVICE),
imx_map_entry(MX50, AIPS2, MT_DEVICE),
};
/*
* Define the MX51 memory map.
*/
static struct map_desc mx51_io_desc[] __initdata = {
imx_map_entry(MX51, TZIC, MT_DEVICE),
imx_map_entry(MX51, IRAM, MT_DEVICE),
imx_map_entry(MX51, DEBUG, MT_DEVICE),
imx_map_entry(MX51, AIPS1, MT_DEVICE),
imx_map_entry(MX51, SPBA0, MT_DEVICE),
imx_map_entry(MX51, AIPS2, MT_DEVICE),
......@@ -36,6 +46,7 @@ static struct map_desc mx51_io_desc[] __initdata = {
* Define the MX53 memory map.
*/
static struct map_desc mx53_io_desc[] __initdata = {
imx_map_entry(MX53, TZIC, MT_DEVICE),
imx_map_entry(MX53, AIPS1, MT_DEVICE),
imx_map_entry(MX53, SPBA0, MT_DEVICE),
imx_map_entry(MX53, AIPS2, MT_DEVICE),
......@@ -46,11 +57,28 @@ static struct map_desc mx53_io_desc[] __initdata = {
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
void __init mx50_map_io(void)
{
iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
}
void __init mx51_map_io(void)
{
iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
}
void __init mx53_map_io(void)
{
iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
}
void __init imx50_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX50);
mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
}
void __init imx51_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX51);
......@@ -58,11 +86,6 @@ void __init imx51_init_early(void)
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
}
void __init mx53_map_io(void)
{
iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
}
void __init imx53_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX53);
......@@ -70,35 +93,19 @@ void __init imx53_init_early(void)
mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
}
void __init mx51_init_irq(void)
void __init mx50_init_irq(void)
{
unsigned long tzic_addr;
void __iomem *tzic_virt;
if (mx51_revision() < IMX_CHIP_REVISION_2_0)
tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
else
tzic_addr = MX51_TZIC_BASE_ADDR;
tzic_virt = ioremap(tzic_addr, SZ_16K);
if (!tzic_virt)
panic("unable to map TZIC interrupt controller\n");
tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
}
tzic_init_irq(tzic_virt);
void __init mx51_init_irq(void)
{
tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
}
void __init mx53_init_irq(void)
{
unsigned long tzic_addr;
void __iomem *tzic_virt;
tzic_addr = MX53_TZIC_BASE_ADDR;
tzic_virt = ioremap(tzic_addr, SZ_16K);
if (!tzic_virt)
panic("unable to map TZIC interrupt controller\n");
tzic_init_irq(tzic_virt);
tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
}
static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
......@@ -138,6 +145,17 @@ static struct sdma_platform_data imx53_sdma_pdata __initdata = {
.script_addrs = &imx53_sdma_script,
};
void __init imx50_soc_init(void)
{
/* i.mx50 has the i.mx31 type gpio */
mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
}
void __init imx51_soc_init(void)
{
/* i.mx51 has the i.mx31 type gpio */
......
......@@ -351,6 +351,11 @@ static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
},
};
static struct gpio mx28evk_lcd_gpios[] = {
{ MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
{ MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
};
static void __init mx28evk_init(void)
{
int ret;
......@@ -377,18 +382,11 @@ static void __init mx28evk_init(void)
mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
}
ret = gpio_request_one(MX28EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
ret = gpio_request_array(mx28evk_lcd_gpios,
ARRAY_SIZE(mx28evk_lcd_gpios));
if (ret)
pr_warn("failed to request gpio lcd-enable: %d\n", ret);
pr_warn("failed to request gpio pins for lcd: %d\n", ret);
else
gpio_set_value(MX28EVK_LCD_ENABLE, 1);
ret = gpio_request_one(MX28EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
if (ret)
pr_warn("failed to request gpio bl-enable: %d\n", ret);
else
gpio_set_value(MX28EVK_BL_ENABLE, 1);
mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
/* power on mmc slot by writing 0 to the gpio */
......@@ -402,6 +400,7 @@ static void __init mx28evk_init(void)
"mmc1-slot-power");
if (ret)
pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
else
mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
gpio_led_register_device(0, &mx28evk_led_data);
......
......@@ -81,11 +81,16 @@
* AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
* mx51:
* TZIC 0xe0000000+0x004000 -> 0xf5000000+0x004000
* IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000
* DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000
* SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000
* mx53:
* TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
* SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
*/
#define IMX_IO_P2V(x) ( \
0xf4000000 + \
......
......@@ -18,18 +18,6 @@
#define MX51_GPU_CTRL_BASE_ADDR 0x30000000
#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
#define MX51_DEBUG_BASE_ADDR 0x60000000
#define MX51_DEBUG_SIZE SZ_1M
#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x01000)
#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x02000)
#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x03000)
#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x04000)
#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x05000)
#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x06000)
#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x07000)
#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x08000)
/*
* SPBA global module enabled #0
*/
......@@ -135,6 +123,7 @@
#define MX51_GPU2D_BASE_ADDR 0xd0000000
#define MX51_TZIC_BASE_ADDR 0xe0000000
#define MX51_TZIC_SIZE SZ_16K
#define MX51_IO_P2V(x) IMX_IO_P2V(x)
#define MX51_IO_ADDRESS(x) IOMEM(MX51_IO_P2V(x))
......@@ -353,7 +342,4 @@ extern int mx51_revision(void);
extern void mx51_display_revision(void);
#endif
/* tape-out 1 defines */
#define MX51_TZIC_BASE_ADDR_TO1 0x8fffc000
#endif /* ifndef __MACH_MX51_H__ */
......@@ -9,6 +9,7 @@
/* TZIC */
#define MX53_TZIC_BASE_ADDR 0x0FFFC000
#define MX53_TZIC_SIZE SZ_16K
/*
* AHCI SATA
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment