scsi: hisi_sas: Make sg_tablesize consistent value

Sht->sg_tablesize is set in the driver, and it will be assigned to
shost->sg_tablesize in SCSI mid-layer. So it is not necessary to assign
shost->sg_table one more time in the driver.

In addition to the change, change each scsi_host_template.sg_tablesize
to HISI_SAS_SGE_PAGE_CNT instead of SG_ALL.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/hisi_sas/hisi_sas_main.c

@@ -2410,7 +2410,6 @@ int hisi_sas_probe(struct platform_device *pdev,
 	shost->max_lun = ~0;
 	shost->max_channel = 1;
 	shost->max_cmd_len = 16;
-	shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
 	if (hisi_hba->hw->slot_index_alloc) {
 		shost->can_queue = hisi_hba->hw->max_command_entries;
 		shost->cmd_per_lun = hisi_hba->hw->max_command_entries;

drivers/scsi/hisi_sas/hisi_sas_v1_hw.c

@@ -1816,7 +1816,7 @@ static struct scsi_host_template sht_v1_hw = {
 	.change_queue_depth	= sas_change_queue_depth,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,

drivers/scsi/hisi_sas/hisi_sas_v2_hw.c

@@ -3578,7 +3578,7 @@ static struct scsi_host_template sht_v2_hw = {
 	.change_queue_depth	= sas_change_queue_depth,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,

drivers/scsi/hisi_sas/hisi_sas_v3_hw.c

@@ -2231,7 +2231,7 @@ static struct scsi_host_template sht_v3_hw = {
 	.change_queue_depth	= sas_change_queue_depth,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
@@ -2373,7 +2373,6 @@ hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	shost->max_lun = ~0;
 	shost->max_channel = 1;
 	shost->max_cmd_len = 16;
-	shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
 	shost->can_queue = hisi_hba->hw->max_command_entries -
 		HISI_SAS_RESERVED_IPTT_CNT;
 	shost->cmd_per_lun = hisi_hba->hw->max_command_entries -