Commit 6dde5ac5 authored by Shawn Guo's avatar Shawn Guo

ARM: imx: move debug macros to include/debug

Move imx debug-macro.S over to common debug macro directory.  It
removes the inclusion to hardware.h by hard-coding the physical
address of uart port and copying IMX_IO_P2V from hardware.h.

Since we will need a common solution, which might use a fixed virtual
address for uart port across platforms, we make a copy of IMX_IO_P2V
here as a temporary solution to enable low-level debug for imx
multi-platform build.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
Acked-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
parent e69dc9a9
...@@ -412,6 +412,14 @@ endchoice ...@@ -412,6 +412,14 @@ endchoice
config DEBUG_LL_INCLUDE config DEBUG_LL_INCLUDE
string string
default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
DEBUG_IMX21_IMX27_UART || \
DEBUG_IMX31_IMX35_UART || \
DEBUG_IMX51_UART || \
DEBUG_IMX50_IMX53_UART ||\
DEBUG_IMX6Q_UART2 || \
DEBUG_IMX6Q_UART4
default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/highbank.S" if DEBUG_HIGHBANK_UART
default "debug/mvebu.S" if DEBUG_MVEBU_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
......
...@@ -10,27 +10,38 @@ ...@@ -10,27 +10,38 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
* *
*/ */
#include <mach/hardware.h>
#ifdef CONFIG_DEBUG_IMX1_UART #ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR MX1_UART1_BASE_ADDR #define UART_PADDR 0x00206000
#elif defined (CONFIG_DEBUG_IMX25_UART) #elif defined (CONFIG_DEBUG_IMX25_UART)
#define UART_PADDR MX25_UART1_BASE_ADDR #define UART_PADDR 0x43f90000
#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART) #elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
#define UART_PADDR MX2x_UART1_BASE_ADDR #define UART_PADDR 0x1000a000
#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART) #elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
#define UART_PADDR MX3x_UART1_BASE_ADDR #define UART_PADDR 0x43f90000
#elif defined (CONFIG_DEBUG_IMX51_UART) #elif defined (CONFIG_DEBUG_IMX51_UART)
#define UART_PADDR MX51_UART1_BASE_ADDR #define UART_PADDR 0x73fbc000
#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART) #elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
#define UART_PADDR MX53_UART1_BASE_ADDR #define UART_PADDR 0x53fbc000
#elif defined (CONFIG_DEBUG_IMX6Q_UART2) #elif defined (CONFIG_DEBUG_IMX6Q_UART2)
#define UART_PADDR MX6Q_UART2_BASE_ADDR #define UART_PADDR 0x021e8000
#elif defined (CONFIG_DEBUG_IMX6Q_UART4) #elif defined (CONFIG_DEBUG_IMX6Q_UART4)
#define UART_PADDR MX6Q_UART4_BASE_ADDR #define UART_PADDR 0x021f0000
#endif #endif
#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) /*
* FIXME: This is a copy of IMX_IO_P2V in hardware.h, and needs to
* stay sync with that. It's hard to maintain, and should be fixed
* globally for multi-platform build to use a fixed virtual address
* for low-level debug uart port across platforms.
*/
#define IMX_IO_P2V(x) ( \
(((x) & 0x80000000) >> 7) | \
(0xf4000000 + \
(((x) & 0x50000000) >> 6) + \
(((x) & 0x0b000000) >> 4) + \
(((x) & 0x000fffff))))
#define UART_VADDR IMX_IO_P2V(UART_PADDR)
.macro addruart, rp, rv, tmp .macro addruart, rp, rv, tmp
ldr \rp, =UART_PADDR @ physical ldr \rp, =UART_PADDR @ physical
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment