[SCSI] qla4xxx: Added support for ISP83XX

Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla4xxx/Kconfig

@@ -4,5 +4,5 @@ config SCSI_QLA_ISCSI
 	select SCSI_ISCSI_ATTRS
 	select ISCSI_BOOT_SYSFS
 	---help---
-	This driver supports the QLogic 40xx (ISP4XXX) and 8022 (ISP82XX)
-	iSCSI host adapter family.
+	This driver supports the QLogic 40xx (ISP4XXX), 8022 (ISP82XX)
+	and 8032 (ISP83XX) iSCSI host adapter family.

drivers/scsi/qla4xxx/Makefile

 qla4xxx-y := ql4_os.o ql4_init.o ql4_mbx.o ql4_iocb.o ql4_isr.o \
-		ql4_nx.o ql4_nvram.o ql4_dbg.o ql4_attr.o ql4_bsg.o
+		ql4_nx.o ql4_nvram.o ql4_dbg.o ql4_attr.o ql4_bsg.o ql4_83xx.o
 
 obj-$(CONFIG_SCSI_QLA_ISCSI) += qla4xxx.o
 

drivers/scsi/qla4xxx/ql4_83xx.h

+/*
+ * QLogic iSCSI HBA Driver
+ * Copyright (c)  2003-2012 QLogic Corporation
+ *
+ * See LICENSE.qla4xxx for copyright and licensing details.
+ */
+
+#ifndef __QL483XX_H
+#define __QL483XX_H
+
+/* Indirectly Mapped Registers */
+#define QLA83XX_FLASH_SPI_STATUS	0x2808E010
+#define QLA83XX_FLASH_SPI_CONTROL	0x2808E014
+#define QLA83XX_FLASH_STATUS		0x42100004
+#define QLA83XX_FLASH_CONTROL		0x42110004
+#define QLA83XX_FLASH_ADDR		0x42110008
+#define QLA83XX_FLASH_WRDATA		0x4211000C
+#define QLA83XX_FLASH_RDDATA		0x42110018
+#define QLA83XX_FLASH_DIRECT_WINDOW	0x42110030
+#define QLA83XX_FLASH_DIRECT_DATA(DATA) (0x42150000 | (0x0000FFFF&DATA))
+
+/* Directly Mapped Registers in 83xx register table */
+
+/* Flash access regs */
+#define QLA83XX_FLASH_LOCK		0x3850
+#define QLA83XX_FLASH_UNLOCK		0x3854
+#define QLA83XX_FLASH_LOCK_ID		0x3500
+
+/* Driver Lock regs */
+#define QLA83XX_DRV_LOCK		0x3868
+#define QLA83XX_DRV_UNLOCK		0x386C
+#define QLA83XX_DRV_LOCK_ID		0x3504
+#define QLA83XX_DRV_LOCKRECOVERY	0x379C
+
+/* IDC version */
+#define QLA83XX_IDC_VER_MAJ_VALUE       0x1
+#define QLA83XX_IDC_VER_MIN_VALUE       0x0
+
+/* IDC Registers : Driver Coexistence Defines */
+#define QLA83XX_CRB_IDC_VER_MAJOR	0x3780
+#define QLA83XX_CRB_IDC_VER_MINOR	0x3798
+#define QLA83XX_IDC_DRV_CTRL		0x3790
+#define QLA83XX_IDC_DRV_AUDIT		0x3794
+
+/* qla_83xx_reg_tbl registers */
+#define QLA83XX_PEG_HALT_STATUS1	0x34A8
+#define QLA83XX_PEG_HALT_STATUS2	0x34AC
+#define QLA83XX_PEG_ALIVE_COUNTER	0x34B0 /* FW_HEARTBEAT */
+#define QLA83XX_FW_CAPABILITIES		0x3528
+#define QLA83XX_CRB_DRV_ACTIVE		0x3788 /* IDC_DRV_PRESENCE */
+#define QLA83XX_CRB_DEV_STATE		0x3784 /* IDC_DEV_STATE */
+#define QLA83XX_CRB_DRV_STATE		0x378C /* IDC_DRV_ACK */
+#define QLA83XX_CRB_DRV_SCRATCH		0x3548
+#define QLA83XX_CRB_DEV_PART_INFO1	0x37E0
+#define QLA83XX_CRB_DEV_PART_INFO2	0x37E4
+
+#define QLA83XX_FW_VER_MAJOR		0x3550
+#define QLA83XX_FW_VER_MINOR		0x3554
+#define QLA83XX_FW_VER_SUB		0x3558
+#define QLA83XX_NPAR_STATE		0x359C
+#define QLA83XX_FW_IMAGE_VALID		0x35FC
+#define QLA83XX_CMDPEG_STATE		0x3650
+#define QLA83XX_ASIC_TEMP		0x37B4
+#define QLA83XX_FW_API			0x356C
+#define QLA83XX_DRV_OP_MODE		0x3570
+
+static const uint32_t qla4_83xx_reg_tbl[] = {
+	QLA83XX_PEG_HALT_STATUS1,
+	QLA83XX_PEG_HALT_STATUS2,
+	QLA83XX_PEG_ALIVE_COUNTER,
+	QLA83XX_CRB_DRV_ACTIVE,
+	QLA83XX_CRB_DEV_STATE,
+	QLA83XX_CRB_DRV_STATE,
+	QLA83XX_CRB_DRV_SCRATCH,
+	QLA83XX_CRB_DEV_PART_INFO1,
+	QLA83XX_CRB_IDC_VER_MAJOR,
+	QLA83XX_FW_VER_MAJOR,
+	QLA83XX_FW_VER_MINOR,
+	QLA83XX_FW_VER_SUB,
+	QLA83XX_CMDPEG_STATE,
+	QLA83XX_ASIC_TEMP,
+};
+
+#define QLA83XX_CRB_WIN_BASE		0x3800
+#define QLA83XX_CRB_WIN_FUNC(f)		(QLA83XX_CRB_WIN_BASE+((f)*4))
+#define QLA83XX_SEM_LOCK_BASE		0x3840
+#define QLA83XX_SEM_UNLOCK_BASE		0x3844
+#define QLA83XX_SEM_LOCK_FUNC(f)	(QLA83XX_SEM_LOCK_BASE+((f)*8))
+#define QLA83XX_SEM_UNLOCK_FUNC(f)	(QLA83XX_SEM_UNLOCK_BASE+((f)*8))
+#define QLA83XX_LINK_STATE(f)		(0x3698+((f) > 7 ? 4 : 0))
+#define QLA83XX_LINK_SPEED(f)		(0x36E0+(((f) >> 2) * 4))
+#define QLA83XX_MAX_LINK_SPEED(f)       (0x36F0+(((f) / 4) * 4))
+#define QLA83XX_LINK_SPEED_FACTOR	10
+
+/* FLASH API Defines */
+#define QLA83xx_FLASH_MAX_WAIT_USEC	100
+#define QLA83XX_FLASH_LOCK_TIMEOUT	10000
+#define QLA83XX_FLASH_SECTOR_SIZE	65536
+#define QLA83XX_DRV_LOCK_TIMEOUT	2000
+#define QLA83XX_FLASH_SECTOR_ERASE_CMD	0xdeadbeef
+#define QLA83XX_FLASH_WRITE_CMD		0xdacdacda
+#define QLA83XX_FLASH_BUFFER_WRITE_CMD	0xcadcadca
+#define QLA83XX_FLASH_READ_RETRY_COUNT	2000
+#define QLA83XX_FLASH_STATUS_READY	0x6
+#define QLA83XX_FLASH_BUFFER_WRITE_MIN	2
+#define QLA83XX_FLASH_BUFFER_WRITE_MAX	64
+#define QLA83XX_FLASH_STATUS_REG_POLL_DELAY 1
+#define QLA83XX_ERASE_MODE		1
+#define QLA83XX_WRITE_MODE		2
+#define QLA83XX_DWORD_WRITE_MODE	3
+
+#define QLA83XX_GLOBAL_RESET		0x38CC
+#define QLA83XX_WILDCARD		0x38F0
+#define QLA83XX_INFORMANT		0x38FC
+#define QLA83XX_HOST_MBX_CTRL		0x3038
+#define QLA83XX_FW_MBX_CTRL		0x303C
+#define QLA83XX_BOOTLOADER_ADDR		0x355C
+#define QLA83XX_BOOTLOADER_SIZE		0x3560
+#define QLA83XX_FW_IMAGE_ADDR		0x3564
+#define QLA83XX_MBX_INTR_ENABLE		0x1000
+#define QLA83XX_MBX_INTR_MASK		0x1200
+
+/* IDC Control Register bit defines */
+#define DONTRESET_BIT0		0x1
+#define GRACEFUL_RESET_BIT1	0x2
+
+#define QLA83XX_HALT_STATUS_INFORMATIONAL	(0x1 << 29)
+#define QLA83XX_HALT_STATUS_FW_RESET		(0x2 << 29)
+#define QLA83XX_HALT_STATUS_UNRECOVERABLE	(0x4 << 29)
+
+/* Firmware image definitions */
+#define QLA83XX_BOOTLOADER_FLASH_ADDR	0x10000
+#define QLA83XX_BOOT_FROM_FLASH		0
+
+#define QLA83XX_IDC_PARAM_ADDR		0x3e8020
+/* Reset template definitions */
+#define QLA83XX_MAX_RESET_SEQ_ENTRIES	16
+#define QLA83XX_RESTART_TEMPLATE_SIZE	0x2000
+#define QLA83XX_RESET_TEMPLATE_ADDR	0x4F0000
+#define QLA83XX_RESET_SEQ_VERSION	0x0101
+
+/* Reset template entry opcodes */
+#define OPCODE_NOP			0x0000
+#define OPCODE_WRITE_LIST		0x0001
+#define OPCODE_READ_WRITE_LIST		0x0002
+#define OPCODE_POLL_LIST		0x0004
+#define OPCODE_POLL_WRITE_LIST		0x0008
+#define OPCODE_READ_MODIFY_WRITE	0x0010
+#define OPCODE_SEQ_PAUSE		0x0020
+#define OPCODE_SEQ_END			0x0040
+#define OPCODE_TMPL_END			0x0080
+#define OPCODE_POLL_READ_LIST		0x0100
+
+/* Template Header */
+#define RESET_TMPLT_HDR_SIGNATURE	0xCAFE
+struct qla4_83xx_reset_template_hdr {
+	__le16	version;
+	__le16	signature;
+	__le16	size;
+	__le16	entries;
+	__le16	hdr_size;
+	__le16	checksum;
+	__le16	init_seq_offset;
+	__le16	start_seq_offset;
+} __packed;
+
+/* Common Entry Header. */
+struct qla4_83xx_reset_entry_hdr {
+	__le16 cmd;
+	__le16 size;
+	__le16 count;
+	__le16 delay;
+} __packed;
+
+/* Generic poll entry type. */
+struct qla4_83xx_poll {
+	__le32  test_mask;
+	__le32  test_value;
+} __packed;
+
+/* Read modify write entry type. */
+struct qla4_83xx_rmw {
+	__le32  test_mask;
+	__le32  xor_value;
+	__le32  or_value;
+	uint8_t shl;
+	uint8_t shr;
+	uint8_t index_a;
+	uint8_t rsvd;
+} __packed;
+
+/* Generic Entry Item with 2 DWords. */
+struct qla4_83xx_entry {
+	__le32 arg1;
+	__le32 arg2;
+} __packed;
+
+/* Generic Entry Item with 4 DWords.*/
+struct qla4_83xx_quad_entry {
+	__le32 dr_addr;
+	__le32 dr_value;
+	__le32 ar_addr;
+	__le32 ar_value;
+} __packed;
+
+struct qla4_83xx_reset_template {
+	int seq_index;
+	int seq_error;
+	int array_index;
+	uint32_t array[QLA83XX_MAX_RESET_SEQ_ENTRIES];
+	uint8_t *buff;
+	uint8_t *stop_offset;
+	uint8_t *start_offset;
+	uint8_t *init_offset;
+	struct qla4_83xx_reset_template_hdr *hdr;
+	uint8_t seq_end;
+	uint8_t template_end;
+};
+
+/* POLLRD Entry */
+struct qla83xx_minidump_entry_pollrd {
+	struct qla8xxx_minidump_entry_hdr h;
+	uint32_t select_addr;
+	uint32_t read_addr;
+	uint32_t select_value;
+	uint16_t select_value_stride;
+	uint16_t op_count;
+	uint32_t poll_wait;
+	uint32_t poll_mask;
+	uint32_t data_size;
+	uint32_t rsvd_1;
+};
+
+/* RDMUX2 Entry */
+struct qla83xx_minidump_entry_rdmux2 {
+	struct qla8xxx_minidump_entry_hdr h;
+	uint32_t select_addr_1;
+	uint32_t select_addr_2;
+	uint32_t select_value_1;
+	uint32_t select_value_2;
+	uint32_t op_count;
+	uint32_t select_value_mask;
+	uint32_t read_addr;
+	uint8_t select_value_stride;
+	uint8_t data_size;
+	uint8_t rsvd[2];
+};
+
+/* POLLRDMWR Entry */
+struct qla83xx_minidump_entry_pollrdmwr {
+	struct qla8xxx_minidump_entry_hdr h;
+	uint32_t addr_1;
+	uint32_t addr_2;
+	uint32_t value_1;
+	uint32_t value_2;
+	uint32_t poll_wait;
+	uint32_t poll_mask;
+	uint32_t modify_mask;
+	uint32_t data_size;
+};
+
+#endif

drivers/scsi/qla4xxx/ql4_attr.c

@@ -150,7 +150,7 @@ qla4xxx_fw_version_show(struct device *dev,
 {
 	struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev));
 
-	if (is_qla8022(ha))
+	if (is_qla80XX(ha))
 		return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d (%x)\n",
 				ha->firmware_version[0],
 				ha->firmware_version[1],

drivers/scsi/qla4xxx/ql4_dbg.c

@@ -131,3 +131,31 @@ void qla4xxx_dump_registers(struct scsi_qla_host *ha)
 		    &ha->reg->ctrl_status);
 	}
 }
+
+void qla4_8xxx_dump_peg_reg(struct scsi_qla_host *ha)
+{
+	uint32_t halt_status1, halt_status2;
+
+	halt_status1 = qla4_8xxx_rd_direct(ha, QLA8XXX_PEG_HALT_STATUS1);
+	halt_status2 = qla4_8xxx_rd_direct(ha, QLA8XXX_PEG_HALT_STATUS2);
+
+	if (is_qla8022(ha)) {
+		ql4_printk(KERN_INFO, ha,
+			   "scsi(%ld): %s, ISP8022 Dumping hw/fw registers:\n"
+			   " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,\n"
+			   " PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,\n"
+			   " PEG_NET_2_PC: 0x%x, PEG_NET_3_PC: 0x%x,\n"
+			   " PEG_NET_4_PC: 0x%x\n", ha->host_no,
+			   __func__, halt_status1, halt_status2,
+			   qla4_82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x3c),
+			   qla4_82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_1 + 0x3c),
+			   qla4_82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_2 + 0x3c),
+			   qla4_82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_3 + 0x3c),
+			   qla4_82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_4 + 0x3c));
+	} else if (is_qla8032(ha)) {
+		ql4_printk(KERN_INFO, ha,
+			   "scsi(%ld): %s, ISP8324 Dumping hw/fw registers:\n"
+			   " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,\n",
+			   ha->host_no, __func__, halt_status1, halt_status2);
+	}
+}

drivers/scsi/qla4xxx/ql4_def.h

@@ -42,6 +42,7 @@
 #include "ql4_nx.h"
 #include "ql4_fw.h"
 #include "ql4_nvram.h"
+#include "ql4_83xx.h"
 
 #ifndef PCI_DEVICE_ID_QLOGIC_ISP4010
 #define PCI_DEVICE_ID_QLOGIC_ISP4010	0x4010
@@ -59,6 +60,10 @@
 #define PCI_DEVICE_ID_QLOGIC_ISP8022	0x8022
 #endif
 
+#ifndef PCI_DEVICE_ID_QLOGIC_ISP8324
+#define PCI_DEVICE_ID_QLOGIC_ISP8324	0x8032
+#endif
+
 #define ISP4XXX_PCI_FN_1	0x1
 #define ISP4XXX_PCI_FN_2	0x3
 
@@ -510,6 +515,7 @@ struct scsi_qla_host {
 #define AF_82XX_FW_DUMPED		24 /* 0x01000000 */
 #define AF_8XXX_RST_OWNER		25 /* 0x02000000 */
 #define AF_82XX_DUMP_READING		26 /* 0x04000000 */
+#define AF_83XX_NO_FW_DUMP		27 /* 0x08000000 */
 
 	unsigned long dpc_flags;
 
@@ -746,6 +752,10 @@ struct scsi_qla_host {
 	uint32_t mrb_index;
 
 	uint32_t *reg_tbl;
+	struct qla4_83xx_reset_template reset_tmplt;
+	struct device_reg_83xx  __iomem *qla4_83xx_reg; /* Base I/O address
+							   for ISP8324 */
+	uint32_t pf_bit;
 };
 
 struct ql4_task_data {
@@ -808,13 +818,20 @@ static inline int is_qla8022(struct scsi_qla_host *ha)
 	return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8022;
 }
 
-/* Note: Currently AER/EEH is now supported only for 8022 cards
- * This function needs to be updated when AER/EEH is enabled
- * for other cards.
- */
+static inline int is_qla8032(struct scsi_qla_host *ha)
+{
+	return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8324;
+}
+
+static inline int is_qla80XX(struct scsi_qla_host *ha)
+{
+	return is_qla8022(ha) || is_qla8032(ha);
+}
+
 static inline int is_aer_supported(struct scsi_qla_host *ha)
 {
-	return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8022;
+	return ((ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8022) ||
+		(ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8324));
 }
 
 static inline int adapter_up(struct scsi_qla_host *ha)

drivers/scsi/qla4xxx/ql4_fw.h

@@ -65,6 +65,40 @@ struct device_reg_82xx {
 #define ISRX_82XX_RISC_INT	BIT_0 /* RISC interrupt. */
 };
 
+/* ISP 83xx I/O Register Set structure */
+struct device_reg_83xx {
+	__le32 mailbox_in[16];	/* 0x0000 */
+	__le32 reserve1[496];	/* 0x0040 */
+	__le32 mailbox_out[16];	/* 0x0800 */
+	__le32 reserve2[496];
+	__le32 mbox_int;	/* 0x1000 */
+	__le32 reserve3[63];
+	__le32 req_q_out;	/* 0x1100 */
+	__le32 reserve4[63];
+
+	__le32 rsp_q_in;	/* 0x1200 */
+	__le32 reserve5[1919];
+
+	__le32 req_q_in;	/* 0x3000 */
+	__le32 reserve6[3];
+	__le32 iocb_int_mask;	/* 0x3010 */
+	__le32 reserve7[3];
+	__le32 rsp_q_out;	/* 0x3020 */
+	__le32 reserve8[3];
+	__le32 anonymousbuff;	/* 0x3030 */
+	__le32 mb_int_mask;	/* 0x3034 */
+
+	__le32 host_intr;	/* 0x3038 - Host Interrupt Register */
+	__le32 risc_intr;	/* 0x303C - RISC Interrupt Register */
+	__le32 reserve9[544];
+	__le32 leg_int_ptr;	/* 0x38C0 - Legacy Interrupt Pointer Register */
+	__le32 leg_int_trig;	/* 0x38C4 - Legacy Interrupt Trigger Control */
+	__le32 leg_int_mask;	/* 0x38C8 - Legacy Interrupt Mask Register */
+};
+
+#define INT_ENABLE_FW_MB	(1 << 2)
+#define INT_MASK_FW_MB		(1 << 2)
+
 /*  remote register set (access via PCI memory read/write) */
 struct isp_reg {
 #define MBOX_REG_COUNT 8
@@ -1198,6 +1232,9 @@ struct ql_iscsi_stats {
 #define QLA8XXX_DBG_STATE_ARRAY_LEN		16
 #define QLA8XXX_DBG_CAP_SIZE_ARRAY_LEN		8
 #define QLA8XXX_DBG_RSVD_ARRAY_LEN		8
+#define QLA83XX_DBG_OCM_WNDREG_ARRAY_LEN	16
+#define QLA83XX_SS_OCM_WNDREG_INDEX		3
+#define QLA83XX_SS_PCI_INDEX			0
 
 struct qla4_8xxx_minidump_template_hdr {
 	uint32_t entry_type;
@@ -1216,6 +1253,7 @@ struct qla4_8xxx_minidump_template_hdr {
 
 	uint32_t saved_state_array[QLA8XXX_DBG_STATE_ARRAY_LEN];
 	uint32_t capture_size_array[QLA8XXX_DBG_CAP_SIZE_ARRAY_LEN];
+	uint32_t ocm_window_reg[QLA83XX_DBG_OCM_WNDREG_ARRAY_LEN];
 };
 
 #endif /*  _QLA4X_FW_H */

drivers/scsi/qla4xxx/ql4_glbl.h

@@ -214,6 +214,47 @@ void qla4_82xx_process_mbox_intr(struct scsi_qla_host *ha, int outcount);
 void qla4xxx_queue_mbox_cmd(struct scsi_qla_host *ha, uint32_t *mbx_cmd,
 			    int incount);
 void qla4xxx_process_mbox_intr(struct scsi_qla_host *ha, int outcount);
+void qla4_8xxx_dump_peg_reg(struct scsi_qla_host *ha);
+void qla4_83xx_disable_intrs(struct scsi_qla_host *ha);
+void qla4_83xx_enable_intrs(struct scsi_qla_host *ha);
+int qla4_83xx_start_firmware(struct scsi_qla_host *ha);
+irqreturn_t qla4_83xx_intr_handler(int irq, void *dev_id);
+void qla4_83xx_interrupt_service_routine(struct scsi_qla_host *ha,
+					 uint32_t intr_status);
+int qla4_83xx_isp_reset(struct scsi_qla_host *ha);
+void qla4_83xx_queue_iocb(struct scsi_qla_host *ha);
+void qla4_83xx_complete_iocb(struct scsi_qla_host *ha);
+uint16_t qla4_83xx_rd_shdw_req_q_out(struct scsi_qla_host *ha);
+uint16_t qla4_83xx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha);
+uint32_t qla4_83xx_rd_reg(struct scsi_qla_host *ha, ulong addr);
+void qla4_83xx_wr_reg(struct scsi_qla_host *ha, ulong addr, uint32_t val);
+int qla4_83xx_rd_reg_indirect(struct scsi_qla_host *ha, uint32_t addr,
+			      uint32_t *data);
+int qla4_83xx_wr_reg_indirect(struct scsi_qla_host *ha, uint32_t addr,
+			      uint32_t data);
+int qla4_83xx_drv_lock(struct scsi_qla_host *ha);
+void qla4_83xx_drv_unlock(struct scsi_qla_host *ha);
+void qla4_83xx_rom_lock_recovery(struct scsi_qla_host *ha);
+void qla4_83xx_queue_mbox_cmd(struct scsi_qla_host *ha, uint32_t *mbx_cmd,
+			      int incount);
+void qla4_83xx_process_mbox_intr(struct scsi_qla_host *ha, int outcount);
+void qla4_83xx_read_reset_template(struct scsi_qla_host *ha);
+void qla4_83xx_set_idc_dontreset(struct scsi_qla_host *ha);
+int qla4_83xx_idc_dontreset(struct scsi_qla_host *ha);
+int qla4_83xx_lockless_flash_read_u32(struct scsi_qla_host *ha,
+				      uint32_t flash_addr, uint8_t *p_data,
+				      int u32_word_count);
+void qla4_83xx_clear_idc_dontreset(struct scsi_qla_host *ha);
+void qla4_83xx_need_reset_handler(struct scsi_qla_host *ha);
+int qla4_83xx_flash_read_u32(struct scsi_qla_host *ha, uint32_t flash_addr,
+			     uint8_t *p_data, int u32_word_count);
+void qla4_83xx_get_idc_param(struct scsi_qla_host *ha);
+void qla4_8xxx_set_rst_ready(struct scsi_qla_host *ha);
+void qla4_8xxx_clear_rst_ready(struct scsi_qla_host *ha);
+int qla4_8xxx_device_bootstrap(struct scsi_qla_host *ha);
+void qla4_8xxx_get_minidump(struct scsi_qla_host *ha);
+int qla4_8xxx_mbx_intr_disable(struct scsi_qla_host *ha);
+int qla4_8xxx_mbx_intr_enable(struct scsi_qla_host *ha);
 
 extern int ql4xextended_error_logging;
 extern int ql4xdontresethba;

drivers/scsi/qla4xxx/ql4_init.c

@@ -107,6 +107,13 @@ int qla4xxx_init_rings(struct scsi_qla_host *ha)
 		    (unsigned long  __iomem *)&ha->qla4_82xx_reg->rsp_q_in);
 		writel(0,
 		    (unsigned long  __iomem *)&ha->qla4_82xx_reg->rsp_q_out);
+	} else if (is_qla8032(ha)) {
+		writel(0,
+		       (unsigned long __iomem *)&ha->qla4_83xx_reg->req_q_in);
+		writel(0,
+		       (unsigned long __iomem *)&ha->qla4_83xx_reg->rsp_q_in);
+		writel(0,
+		       (unsigned long __iomem *)&ha->qla4_83xx_reg->rsp_q_out);
 	} else {
 		/*
 		 * Initialize DMA Shadow registers.  The firmware is really
@@ -524,7 +531,7 @@ static int qla4xxx_init_firmware(struct scsi_qla_host *ha)
 	/* For 82xx, stop firmware before initializing because if BIOS
 	 * has previously initialized firmware, then driver's initialize
 	 * firmware will fail. */
-	if (is_qla8022(ha))
+	if (is_qla80XX(ha))
 		qla4_8xxx_stop_firmware(ha);
 
 	ql4_printk(KERN_INFO, ha, "Initializing firmware..\n");
@@ -537,7 +544,7 @@ static int qla4xxx_init_firmware(struct scsi_qla_host *ha)
 	if (!qla4xxx_fw_ready(ha))
 		return status;
 
-	if (is_qla8022(ha) && !test_bit(AF_INIT_DONE, &ha->flags))
+	if (is_qla80XX(ha) && !test_bit(AF_INIT_DONE, &ha->flags))
 		qla4xxx_alloc_fw_dump(ha);
 
 	return qla4xxx_get_firmware_status(ha);
@@ -946,9 +953,9 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int is_reset)
 
 	set_bit(AF_ONLINE, &ha->flags);
 exit_init_hba:
-	if (is_qla8022(ha) && (status == QLA_ERROR)) {
+	if (is_qla80XX(ha) && (status == QLA_ERROR)) {
 		/* Since interrupts are registered in start_firmware for
-		 * 82xx, release them here if initialize_adapter fails */
+		 * 80XX, release them here if initialize_adapter fails */
 		qla4xxx_free_irqs(ha);
 	}
 

drivers/scsi/qla4xxx/ql4_iocb.c

@@ -192,6 +192,18 @@ static void qla4xxx_build_scsi_iocbs(struct srb *srb,
 	}
 }
 
+void qla4_83xx_queue_iocb(struct scsi_qla_host *ha)
+{
+	writel(ha->request_in, &ha->qla4_83xx_reg->req_q_in);
+	readl(&ha->qla4_83xx_reg->req_q_in);
+}
+
+void qla4_83xx_complete_iocb(struct scsi_qla_host *ha)
+{
+	writel(ha->response_out, &ha->qla4_83xx_reg->rsp_q_out);
+	readl(&ha->qla4_83xx_reg->rsp_q_out);
+}
+
 /**
  * qla4_82xx_queue_iocb - Tell ISP it's got new request(s)
  * @ha: pointer to host adapter structure.

drivers/scsi/qla4xxx/ql4_isr.c

@@ -126,7 +126,7 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha,
 		ql4_printk(KERN_WARNING, ha, "%s invalid status entry: "
 			   "handle=0x%0x, srb=%p\n", __func__,
 			   sts_entry->handle, srb);
-		if (is_qla8022(ha))
+		if (is_qla80XX(ha))
 			set_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags);
 		else
 			set_bit(DPC_RESET_HA, &ha->dpc_flags);
@@ -594,6 +594,14 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 {
 	int i;
 	uint32_t mbox_sts[MBOX_AEN_REG_COUNT];
+	__le32 __iomem *mailbox_out;
+
+	if (is_qla8032(ha))
+		mailbox_out = &ha->qla4_83xx_reg->mailbox_out[0];
+	else if (is_qla8022(ha))
+		mailbox_out = &ha->qla4_82xx_reg->mailbox_out[0];
+	else
+		mailbox_out = &ha->reg->mailbox[0];
 
 	if ((mbox_status == MBOX_STS_BUSY) ||
 	    (mbox_status == MBOX_STS_INTERMEDIATE_COMPLETION) ||
@@ -606,9 +614,7 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 			 * location and set mailbox command done flag
 			 */
 			for (i = 0; i < ha->mbox_status_count; i++)
-				ha->mbox_status[i] = is_qla8022(ha)
-				    ? readl(&ha->qla4_82xx_reg->mailbox_out[i])
-				    : readl(&ha->reg->mailbox[i]);
+				ha->mbox_status[i] = readl(&mailbox_out[i]);
 
 			set_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
 
@@ -617,9 +623,7 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 		}
 	} else if (mbox_status >> 12 == MBOX_ASYNC_EVENT_STATUS) {
 		for (i = 0; i < MBOX_AEN_REG_COUNT; i++)
-			mbox_sts[i] = is_qla8022(ha)
-			    ? readl(&ha->qla4_82xx_reg->mailbox_out[i])
-			    : readl(&ha->reg->mailbox[i]);
+			mbox_sts[i] = readl(&mailbox_out[i]);
 
 		/* Immediately process the AENs that don't require much work.
 		 * Only queue the database_changed AENs */
@@ -635,7 +639,8 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 			ql4_printk(KERN_INFO, ha, "%s: System Err\n", __func__);
 			qla4xxx_dump_registers(ha);
 
-			if (ql4xdontresethba) {
+			if ((is_qla8022(ha) && ql4xdontresethba) ||
+			    (is_qla8032(ha) && qla4_83xx_idc_dontreset(ha))) {
 				DEBUG2(printk("scsi%ld: %s:Don't Reset HBA\n",
 				    ha->host_no, __func__));
 			} else {
@@ -651,7 +656,7 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 		case MBOX_ASTS_DHCP_LEASE_EXPIRED:
 			DEBUG2(printk("scsi%ld: AEN %04x, ERROR Status, "
 				      "Reset HA\n", ha->host_no, mbox_status));
-			if (is_qla8022(ha))
+			if (is_qla80XX(ha))
 				set_bit(DPC_RESET_HA_FW_CONTEXT,
 					&ha->dpc_flags);
 			else
@@ -716,7 +721,7 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 				set_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags);
 			else if ((mbox_sts[3] == ACB_STATE_ACQUIRING) &&
 				 (mbox_sts[2] == ACB_STATE_VALID)) {
-				if (is_qla8022(ha))
+				if (is_qla80XX(ha))
 					set_bit(DPC_RESET_HA_FW_CONTEXT,
 						&ha->dpc_flags);
 				else
@@ -815,6 +820,23 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 	}
 }
 
+void qla4_83xx_interrupt_service_routine(struct scsi_qla_host *ha,
+					 uint32_t intr_status)
+{
+	/* Process mailbox/asynch event interrupt.*/
+	if (intr_status) {
+		qla4xxx_isr_decode_mailbox(ha,
+				readl(&ha->qla4_83xx_reg->mailbox_out[0]));
+		/* clear the interrupt */
+		writel(0, &ha->qla4_83xx_reg->risc_intr);
+	} else {
+		qla4xxx_process_response_queue(ha);
+	}
+
+	/* clear the interrupt */
+	writel(0, &ha->qla4_83xx_reg->mb_int_mask);
+}
+
 /**
  * qla4_82xx_interrupt_service_routine - isr
  * @ha: pointer to host adapter structure.
@@ -1045,6 +1067,59 @@ irqreturn_t qla4_82xx_intr_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+#define LEG_INT_PTR_B31		(1 << 31)
+#define LEG_INT_PTR_B30		(1 << 30)
+#define PF_BITS_MASK		(0xF << 16)
+
+/**
+ * qla4_83xx_intr_handler - hardware interrupt handler.
+ * @irq: Unused
+ * @dev_id: Pointer to host adapter structure
+ **/
+irqreturn_t qla4_83xx_intr_handler(int irq, void *dev_id)
+{
+	struct scsi_qla_host *ha = dev_id;
+	uint32_t leg_int_ptr = 0;
+	unsigned long flags = 0;
+
+	ha->isr_count++;
+	leg_int_ptr = readl(&ha->qla4_83xx_reg->leg_int_ptr);
+
+	/* Legacy interrupt is valid if bit31 of leg_int_ptr is set */
+	if (!(leg_int_ptr & LEG_INT_PTR_B31)) {
+		ql4_printk(KERN_ERR, ha,
+			   "%s: Legacy Interrupt Bit 31 not set, spurious interrupt!\n",
+			   __func__);
+		return IRQ_NONE;
+	}
+
+	/* Validate the PCIE function ID set in leg_int_ptr bits [19..16] */
+	if ((leg_int_ptr & PF_BITS_MASK) != ha->pf_bit) {
+		ql4_printk(KERN_ERR, ha,
+			   "%s: Incorrect function ID 0x%x in legacy interrupt register, ha->pf_bit = 0x%x\n",
+			   __func__, (leg_int_ptr & PF_BITS_MASK), ha->pf_bit);
+		return IRQ_NONE;
+	}
+
+	/* To de-assert legacy interrupt, write 0 to Legacy Interrupt Trigger
+	 * Control register and poll till Legacy Interrupt Pointer register
+	 * bit30 is 0.
+	 */
+	writel(0, &ha->qla4_83xx_reg->leg_int_trig);
+	do {
+		leg_int_ptr = readl(&ha->qla4_83xx_reg->leg_int_ptr);
+		if ((leg_int_ptr & PF_BITS_MASK) != ha->pf_bit)
+			break;
+	} while (leg_int_ptr & LEG_INT_PTR_B30);
+
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+	leg_int_ptr = readl(&ha->qla4_83xx_reg->risc_intr);
+	ha->isp_ops->interrupt_service_routine(ha, leg_int_ptr);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	return IRQ_HANDLED;
+}
+
 irqreturn_t
 qla4_8xxx_msi_handler(int irq, void *dev_id)
 {
@@ -1068,6 +1143,37 @@ qla4_8xxx_msi_handler(int irq, void *dev_id)
 	return qla4_8xxx_default_intr_handler(irq, dev_id);
 }
 
+static irqreturn_t qla4_83xx_mailbox_intr_handler(int irq, void *dev_id)
+{
+	struct scsi_qla_host *ha = dev_id;
+	unsigned long flags;
+	uint32_t ival = 0;
+
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+
+	ival = readl(&ha->qla4_83xx_reg->risc_intr);
+	if (ival == 0) {
+		ql4_printk(KERN_INFO, ha,
+			   "%s: It is a spurious mailbox interrupt!\n",
+			   __func__);
+		ival = readl(&ha->qla4_83xx_reg->mb_int_mask);
+		ival &= ~INT_MASK_FW_MB;
+		writel(ival, &ha->qla4_83xx_reg->mb_int_mask);
+		goto exit;
+	}
+
+	qla4xxx_isr_decode_mailbox(ha,
+				   readl(&ha->qla4_83xx_reg->mailbox_out[0]));
+	writel(0, &ha->qla4_83xx_reg->risc_intr);
+	ival = readl(&ha->qla4_83xx_reg->mb_int_mask);
+	ival &= ~INT_MASK_FW_MB;
+	writel(ival, &ha->qla4_83xx_reg->mb_int_mask);
+	ha->isr_count++;
+exit:
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	return IRQ_HANDLED;
+}
+
 /**
  * qla4_8xxx_default_intr_handler - hardware interrupt handler.
  * @irq: Unused
@@ -1084,6 +1190,9 @@ qla4_8xxx_default_intr_handler(int irq, void *dev_id)
 	uint32_t intr_status;
 	uint8_t reqs_count = 0;
 
+	if (is_qla8032(ha)) {
+		qla4_83xx_mailbox_intr_handler(irq, dev_id);
+	} else {
 		spin_lock_irqsave(&ha->hardware_lock, flags);
 		while (1) {
 			if (!(readl(&ha->qla4_82xx_reg->host_int) &
@@ -1104,9 +1213,9 @@ qla4_8xxx_default_intr_handler(int irq, void *dev_id)
 			if (++reqs_count == MAX_REQS_SERVICED_PER_INTR)
 				break;
 		}
-
 		ha->isr_count++;
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	}
 	return IRQ_HANDLED;
 }
 
@@ -1115,13 +1224,25 @@ qla4_8xxx_msix_rsp_q(int irq, void *dev_id)
 {
 	struct scsi_qla_host *ha = dev_id;
 	unsigned long flags;
+	uint32_t ival = 0;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
+	if (is_qla8032(ha)) {
+		ival = readl(&ha->qla4_83xx_reg->iocb_int_mask);
+		if (ival == 0) {
+			ql4_printk(KERN_INFO, ha, "%s: It is a spurious iocb interrupt!\n",
+				   __func__);
+			goto exit_msix_rsp_q;
+		}
+		qla4xxx_process_response_queue(ha);
+		writel(0, &ha->qla4_83xx_reg->iocb_int_mask);
+	} else {
 		qla4xxx_process_response_queue(ha);
 		writel(0, &ha->qla4_82xx_reg->host_int);
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
-
+	}
 	ha->isr_count++;
+exit_msix_rsp_q:
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -1196,8 +1317,15 @@ int qla4xxx_request_irqs(struct scsi_qla_host *ha)
 	if (is_qla40XX(ha))
 		goto try_intx;
 
-	if (ql4xenablemsix == 2)
+	if (ql4xenablemsix == 2) {
+		/* Note: MSI Interrupts not supported for ISP8324 */
+		if (is_qla8032(ha)) {
+			ql4_printk(KERN_INFO, ha, "%s: MSI Interrupts not supported for ISP8324, Falling back-to INTx mode\n",
+				   __func__);
+			goto try_intx;
+		}
 		goto try_msi;
+	}
 
 	if (ql4xenablemsix == 0 || ql4xenablemsix != 1)
 		goto try_intx;
@@ -1208,6 +1336,12 @@ int qla4xxx_request_irqs(struct scsi_qla_host *ha)
 		DEBUG2(ql4_printk(KERN_INFO, ha,
 		    "MSI-X: Enabled (0x%X).\n", ha->revision_id));
 		goto irq_attached;
+	} else {
+		if (is_qla8032(ha)) {
+			ql4_printk(KERN_INFO, ha, "%s: ISP8324: MSI-X: Falling back-to INTx mode. ret = %d\n",
+				   __func__, ret);
+			goto try_intx;
+		}
 	}
 
 	ql4_printk(KERN_WARNING, ha,

drivers/scsi/qla4xxx/ql4_mbx.c

@@ -107,7 +107,7 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
 		msleep(10);
 	}
 
-	if (is_qla8022(ha)) {
+	if (is_qla80XX(ha)) {
 		if (test_bit(AF_FW_RECOVERY, &ha->flags)) {
 			DEBUG2(ql4_printk(KERN_WARNING, ha,
 					  "scsi%ld: %s: prematurely completing mbx cmd as firmware recovery detected\n",
@@ -183,7 +183,7 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
 
 	/* Check for mailbox timeout. */
 	if (!test_bit(AF_MBOX_COMMAND_DONE, &ha->flags)) {
-		if (is_qla8022(ha) &&
+		if (is_qla80XX(ha) &&
 		    test_bit(AF_FW_RECOVERY, &ha->flags)) {
 			DEBUG2(ql4_printk(KERN_INFO, ha,
 			    "scsi%ld: %s: prematurely completing mbx cmd as "
@@ -544,7 +544,7 @@ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
 		__constant_cpu_to_le16(FWOPT_SESSION_MODE |
 				       FWOPT_INITIATOR_MODE);
 
-	if (is_qla8022(ha))
+	if (is_qla80XX(ha))
 		init_fw_cb->fw_options |=
 		    __constant_cpu_to_le16(FWOPT_ENABLE_CRBDB);
 

drivers/scsi/qla4xxx/ql4_nx.h

@@ -25,6 +25,8 @@
 #define CRB_RCVPEG_STATE		QLA82XX_REG(0x13c)
 #define CRB_DMA_SHIFT			QLA82XX_REG(0xcc)
 #define CRB_TEMP_STATE			QLA82XX_REG(0x1b4)
+#define CRB_CMDPEG_CHECK_RETRY_COUNT	60
+#define CRB_CMDPEG_CHECK_DELAY		500
 
 #define qla82xx_get_temp_val(x)		((x) >> 16)
 #define qla82xx_get_temp_state(x)	((x) & 0xffff)
@@ -508,6 +510,7 @@ enum {
 
 #define QLA82XX_P2_ADDR_QDR_NET_MAX	(0x00000003001fffffULL)
 #define QLA82XX_P3_ADDR_QDR_NET_MAX	(0x0000000303ffffffULL)
+#define QLA8XXX_ADDR_QDR_NET_MAX	(0x0000000307ffffffULL)
 
 #define QLA82XX_PCI_CRBSPACE		(unsigned long)0x06000000
 #define QLA82XX_PCI_DIRECT_CRB		(unsigned long)0x04400000
@@ -852,9 +855,13 @@ struct crb_addr_pair {
 #define QLA8XXX_L2ITG	22
 #define QLA8XXX_L2DAT	23
 #define QLA8XXX_L2INS	24
+#define QLA83XX_POLLRD	35
+#define QLA83XX_RDMUX2	36
+#define QLA83XX_POLLRDMWR  37
 #define QLA8XXX_RDROM	71
 #define QLA8XXX_RDMEM	72
 #define QLA8XXX_CNTRL	98
+#define QLA83XX_TLHDR	99
 #define QLA8XXX_RDEND	255
 
 /* Opcodes for Control Entries.
@@ -1007,6 +1014,16 @@ struct qla8xxx_minidump_entry_queue {
 #define MD_MIU_TEST_AGT_ADDR_LO			0x41000094
 #define MD_MIU_TEST_AGT_ADDR_HI			0x41000098
 
+#define MD_MIU_TEST_AGT_WRDATA_LO		0x410000A0
+#define MD_MIU_TEST_AGT_WRDATA_HI		0x410000A4
+#define MD_MIU_TEST_AGT_WRDATA_ULO		0x410000B0
+#define MD_MIU_TEST_AGT_WRDATA_UHI		0x410000B4
+
+#define MD_MIU_TEST_AGT_RDDATA_LO		0x410000A8
+#define MD_MIU_TEST_AGT_RDDATA_HI		0x410000AC
+#define MD_MIU_TEST_AGT_RDDATA_ULO		0x410000B8
+#define MD_MIU_TEST_AGT_RDDATA_UHI		0x410000BC
+
 static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8,
 				0x410000AC, 0x410000B8, 0x410000BC };
 #endif