Merge bk://linux-scsi.bkbits.net/scsi-dledford

into home.transmeta.com:/home/torvalds/v2.5/linux

drivers/scsi/aic7xxx_old.c

@@ -6736,12 +6736,12 @@ aic7xxx_device_queue_depth(struct aic7xxx_host *p, Scsi_Device *device)
  *   prepare for this device to go away
  *-F*************************************************************************/
 static void
-aic7xxx_slave_destroy(Scsi_Device *sdpnt)
+aic7xxx_slave_destroy(Scsi_Device *SDptr)
 {
-  struct aic_dev_data *aic_dev = sdpnt->hostdata;
+  struct aic_dev_data *aic_dev = SDptr->hostdata;
 
   list_del(&aic_dev->list);
-  sdpnt->hostdata = NULL;
+  SDptr->hostdata = NULL;
   kfree(aic_dev);
   return;
 }
@@ -6756,16 +6756,16 @@ aic7xxx_slave_destroy(Scsi_Device *sdpnt)
  *   depths, allocate command structs, etc.
  *-F*************************************************************************/
 static int
-aic7xxx_slave_configure(Scsi_Device *sdpnt)
+aic7xxx_slave_configure(Scsi_Device *SDptr)
 {
-  struct aic7xxx_host *p = (struct aic7xxx_host *) sdpnt->host->hostdata;
+  struct aic7xxx_host *p = (struct aic7xxx_host *) SDptr->host->hostdata;
   struct aic_dev_data *aic_dev;
   int scbnum;
 
-  aic_dev = (struct aic_dev_data *)sdpnt->hostdata;
+  aic_dev = (struct aic_dev_data *)SDptr->hostdata;
 
   aic7xxx_init_transinfo(p, aic_dev);
-  aic7xxx_device_queue_depth(p, sdpnt);
+  aic7xxx_device_queue_depth(p, SDptr);
   if(list_empty(&aic_dev->list))
     list_add_tail(&aic_dev->list, &p->aic_devs);
 
@@ -9024,7 +9024,6 @@ aic7xxx_detect(Scsi_Host_Template *template)
 
   template->proc_name = "aic7xxx";
   template->sg_tablesize = AIC7XXX_MAX_SG;
-  template->max_sectors = 2048;
 
 
 #ifdef CONFIG_PCI
@@ -9246,12 +9245,22 @@ aic7xxx_detect(Scsi_Host_Template *template)
 	    {
               /* duplicate PCI entry, skip it */
 	      kfree(temp_p);
-	      temp_p = NULL;
+              continue;
 	    }
 	    current_p = current_p->next;
 	  }
-	  if ( temp_p == NULL )
+          if(pci_request_regions(temp_p->pdev, "aic7xxx"))
+          {
+            printk("aic7xxx: <%s> at PCI %d/%d/%d\n", 
+              board_names[aic_pdevs[i].board_name_index],
+              temp_p->pci_bus,
+              PCI_SLOT(temp_p->pci_device_fn),
+              PCI_FUNC(temp_p->pci_device_fn));
+            printk("aic7xxx: I/O ports already in use, ignoring.\n");
+            kfree(temp_p);
             continue;
+          }
+
           if (aic7xxx_verbose & VERBOSE_PROBE2)
             printk("aic7xxx: <%s> at PCI %d/%d\n", 
               board_names[aic_pdevs[i].board_name_index],
@@ -9283,20 +9292,6 @@ aic7xxx_detect(Scsi_Host_Template *template)
           pci_write_config_dword(pdev, DEVCONFIG, devconfig);
 #endif /* AIC7XXX_STRICT_PCI_SETUP */
 
-          if(temp_p->base && !request_region(temp_p->base, MAXREG - MINREG,
-				  "aic7xxx"))
-          {
-            printk("aic7xxx: <%s> at PCI %d/%d/%d\n", 
-              board_names[aic_pdevs[i].board_name_index],
-              temp_p->pci_bus,
-              PCI_SLOT(temp_p->pci_device_fn),
-              PCI_FUNC(temp_p->pci_device_fn));
-            printk("aic7xxx: I/O ports already in use, ignoring.\n");
-            kfree(temp_p);
-            temp_p = NULL;
-            continue;
-          }
-
           temp_p->unpause = INTEN;
           temp_p->pause = temp_p->unpause | PAUSE;
           if ( ((temp_p->base == 0) &&
@@ -9309,9 +9304,7 @@ aic7xxx_detect(Scsi_Host_Template *template)
               PCI_SLOT(temp_p->pci_device_fn),
               PCI_FUNC(temp_p->pci_device_fn));
             printk("aic7xxx: Controller disabled by BIOS, ignoring.\n");
-            kfree(temp_p);
-            temp_p = NULL;
-            continue;
+            goto skip_pci_controller;
           }
 
 #ifdef MMAPIO
@@ -9353,9 +9346,7 @@ aic7xxx_detect(Scsi_Host_Template *template)
                     PCI_SLOT(temp_p->pci_device_fn),
                     PCI_FUNC(temp_p->pci_device_fn));
                   printk("aic7xxx: Controller disabled by BIOS, ignoring.\n");
-                  kfree(temp_p);
-                  temp_p = NULL;
-                  continue;
+                  goto skip_pci_controller;
                 }
               }
             }
@@ -9398,10 +9389,7 @@ aic7xxx_detect(Scsi_Host_Template *template)
 
           if (aic7xxx_chip_reset(temp_p) == -1)
           {
-            release_region(temp_p->base, MAXREG - MINREG);
-            kfree(temp_p);
-            temp_p = NULL;
-            continue;
+            goto skip_pci_controller;
           }
           /*
            * Very quickly put the term setting back into the register since
@@ -9687,6 +9675,10 @@ aic7xxx_detect(Scsi_Host_Template *template)
           }
           temp_p->next = NULL;
           found++;
+	  continue;
+skip_pci_controller:
+	  pci_release_regions(temp_p->pdev);
+	  kfree(temp_p);
         }  /* Found an Adaptec PCI device. */
         else /* Well, we found one, but we couldn't get any memory */
         {
@@ -10969,14 +10961,16 @@ aic7xxx_release(struct Scsi_Host *host)
 
   if(p->irq)
     free_irq(p->irq, p);
-  if(p->base)
-    release_region(p->base, MAXREG - MINREG);
 #ifdef MMAPIO
   if(p->maddr)
   {
     iounmap((void *) (((unsigned long) p->maddr) & PAGE_MASK));
   }
 #endif /* MMAPIO */
+  if(!p->pdev)
+    release_region(p->base, MAXREG - MINREG);
+  else
+    pci_release_regions(p->pdev);
   prev = NULL;
   next = first_aic7xxx;
   while(next != NULL)

drivers/scsi/aic7xxx_old/aic7xxx.h

@@ -45,6 +45,7 @@
 	can_queue: 255,		/* max simultaneous cmds      */\
 	this_id: -1,		/* scsi id of host adapter    */\
 	sg_tablesize: 0,	/* max scatter-gather cmds    */\
+	max_sectors: 2048,	/* max physical sectors in 1 cmd */\
 	cmd_per_lun: 3,		/* cmds per lun (linked cmds) */\
 	present: 0,		/* number of 7xxx's present   */\
 	unchecked_isa_dma: 0,	/* no memory DMA restrictions */\

drivers/scsi/scsi.c

@@ -160,15 +160,13 @@ void scsi_build_commandblocks(Scsi_Device * SDpnt);
  */
 void  scsi_initialize_queue(Scsi_Device * SDpnt, struct Scsi_Host * SHpnt)
 {
-	request_queue_t *q = &SDpnt->request_queue;
+	request_queue_t *q = SDpnt->request_queue;
 
 	/*
 	 * tell block layer about assigned host_lock for this host
 	 */
 	blk_init_queue(q, scsi_request_fn, SHpnt->host_lock);
 
-	q->queuedata = (void *) SDpnt;
-
 	/* Hardware imposed limit. */
 	blk_queue_max_hw_segments(q, SHpnt->sg_tablesize);
 
@@ -223,7 +221,7 @@ __setup("scsi_logging=", scsi_logging_setup);
 static void scsi_wait_done(Scsi_Cmnd * SCpnt)
 {
 	struct request *req = SCpnt->request;
-        struct request_queue *q = &SCpnt->device->request_queue;
+        struct request_queue *q = SCpnt->device->request_queue;
         unsigned long flags;
 
         ASSERT_LOCK(q->queue_lock, 0);
@@ -656,17 +654,14 @@ int scsi_mlqueue_insert(Scsi_Cmnd * cmd, int reason)
  */
 void scsi_release_command(Scsi_Cmnd * SCpnt)
 {
-        request_queue_t *q = &SCpnt->device->request_queue;
-
         __scsi_release_command(SCpnt);
-
         /*
          * Finally, hit the queue request function to make sure that
          * the device is actually busy if there are requests present.
          * This won't block - if the device cannot take any more, life
          * will go on.  
          */
-        scsi_queue_next_request(q, NULL);                
+        scsi_queue_next_request(SCpnt->device->request_queue, NULL);
 }
 
 /*
@@ -810,13 +805,12 @@ void scsi_wait_req (Scsi_Request * SRpnt, const void *cmnd ,
  		  int timeout, int retries)
 {
 	DECLARE_COMPLETION(wait);
-	request_queue_t *q = &SRpnt->sr_device->request_queue;
 	
 	SRpnt->sr_request->waiting = &wait;
 	SRpnt->sr_request->rq_status = RQ_SCSI_BUSY;
 	scsi_do_req (SRpnt, (void *) cmnd,
 		buffer, bufflen, scsi_wait_done, timeout, retries);
-	generic_unplug_device(q);
+	generic_unplug_device(SRpnt->sr_device->request_queue);
 	wait_for_completion(&wait);
 	SRpnt->sr_request->waiting = NULL;
 	if( SRpnt->sr_command != NULL )
@@ -1912,10 +1906,8 @@ void scsi_device_put(struct scsi_device *sdev)
  */
 int scsi_slave_attach(struct scsi_device *sdev)
 {
+	/* all this code is now handled elsewhere 
 	if (sdev->attached++ == 0) {
-		/*
-		 * No one was attached.
-		 */
 		scsi_build_commandblocks(sdev);
 		if (sdev->current_queue_depth == 0) {
 			printk(KERN_ERR "scsi: Allocation failure during"
@@ -1935,6 +1927,8 @@ int scsi_slave_attach(struct scsi_device *sdev)
 			scsi_adjust_queue_depth(sdev, 0,
 						sdev->host->cmd_per_lun);
 	}
+		 */
+	sdev->attached++;
 	return 0;
 }
 
@@ -1950,9 +1944,12 @@ int scsi_slave_attach(struct scsi_device *sdev)
  */
 void scsi_slave_detach(struct scsi_device *sdev)
 {
+	/*
 	if (--sdev->attached == 0) {
 		scsi_release_commandblocks(sdev);
 	}
+	*/
+	sdev->attached--;
 }
 /*
  * This entry point should be called by a loadable module if it is trying

drivers/scsi/scsi.h

@@ -569,14 +569,12 @@ struct scsi_device {
 	/*
 	 * This information is private to the scsi mid-layer.
 	 */
-	struct scsi_device *next;	/* Used for linked list */
-	struct scsi_device *prev;	/* Used for linked list */
 	struct list_head    siblings;   /* list of all devices on this host */
 	struct list_head    same_target_siblings; /* just the devices sharing same target id */
 	wait_queue_head_t   scpnt_wait;	/* Used to wait if
 					   device is busy */
 	struct Scsi_Host *host;
-	request_queue_t request_queue;
+	request_queue_t *request_queue;
         atomic_t                device_active; /* commands checked out for device */
 	volatile unsigned short device_busy;	/* commands actually active on low-level */
 	struct list_head free_cmnds;    /* list of available Scsi_Cmnd structs */
@@ -894,11 +892,9 @@ extern int scsi_reset_provider(Scsi_Device *, int);
  *	would be adjustable from 0 to depth.
  **/
 static inline void scsi_activate_tcq(Scsi_Device *SDpnt, int depth) {
-        request_queue_t *q = &SDpnt->request_queue;
-
         if(SDpnt->tagged_supported) {
-		if(!blk_queue_tagged(q))
-			blk_queue_init_tags(q, depth);
+		if(!blk_queue_tagged(SDpnt->request_queue))
+			blk_queue_init_tags(SDpnt->request_queue, depth);
 		scsi_adjust_queue_depth(SDpnt, MSG_ORDERED_TAG, depth);
         }
 }
@@ -908,10 +904,8 @@ static inline void scsi_activate_tcq(Scsi_Device *SDpnt, int depth) {
  * @SDpnt:	device to turn off TCQ for
  **/
 static inline void scsi_deactivate_tcq(Scsi_Device *SDpnt, int depth) {
-	request_queue_t *q = &SDpnt->request_queue;
-
-	if(blk_queue_tagged(q))
-		blk_queue_free_tags(q);
+	if(blk_queue_tagged(SDpnt->request_queue))
+		blk_queue_free_tags(SDpnt->request_queue);
 	scsi_adjust_queue_depth(SDpnt, 0, depth);
 }
 
@@ -957,7 +951,7 @@ static inline Scsi_Cmnd *scsi_find_tag(Scsi_Device *SDpnt, int tag) {
                 /* single command, look in space */
                 return SDpnt->current_cmnd;
 
-        req = blk_queue_find_tag(&SDpnt->request_queue, tag);
+        req = blk_queue_find_tag(SDpnt->request_queue, tag);
 
         if(req == NULL)
                 return NULL;

drivers/scsi/scsi_error.c

@@ -1487,7 +1487,7 @@ static void scsi_restart_operations(struct Scsi_Host *shost)
 			break;
 		}
 
-		__blk_run_queue(&sdev->request_queue);
+		__blk_run_queue(sdev->request_queue);
 	}
 	spin_unlock_irqrestore(shost->host_lock, flags);
 }

drivers/scsi/scsi_lib.c

@@ -57,9 +57,8 @@ struct scsi_host_sg_pool scsi_sg_pools[SG_MEMPOOL_NR] = {
  */
 int scsi_insert_special_cmd(Scsi_Cmnd * SCpnt, int at_head)
 {
-	request_queue_t *q = &SCpnt->device->request_queue;
-
-	blk_insert_request(q, SCpnt->request, at_head, SCpnt);
+	blk_insert_request(SCpnt->device->request_queue, SCpnt->request,
+		       	   at_head, SCpnt);
 	return 0;
 }
 
@@ -85,16 +84,13 @@ int scsi_insert_special_cmd(Scsi_Cmnd * SCpnt, int at_head)
  */
 int scsi_insert_special_req(Scsi_Request * SRpnt, int at_head)
 {
-	request_queue_t *q = &SRpnt->sr_device->request_queue;
-
 	/* This is used to insert SRpnt specials.  Because users of
 	 * this function are apt to reuse requests with no modification,
 	 * we have to sanitise the request flags here
 	 */
-
 	SRpnt->sr_request->flags &= ~REQ_DONTPREP;
-
-	blk_insert_request(q, SRpnt->sr_request, at_head, SRpnt);
+	blk_insert_request(SRpnt->sr_device->request_queue, SRpnt->sr_request,
+		       	   at_head, SRpnt);
 	return 0;
 }
 
@@ -215,7 +211,7 @@ void scsi_queue_next_request(request_queue_t * q, Scsi_Cmnd * SCpnt)
 {
 	int all_clear;
 	unsigned long flags;
-	Scsi_Device *SDpnt;
+	Scsi_Device *SDpnt, *SDpnt2;
 	struct Scsi_Host *SHpnt;
 
 	ASSERT_LOCK(q->queue_lock, 0);
@@ -256,17 +252,17 @@ void scsi_queue_next_request(request_queue_t * q, Scsi_Cmnd * SCpnt)
 	 * with special case code, then spin off separate versions and
 	 * use function pointers to pick the right one.
 	 */
-	if (SDpnt->single_lun && blk_queue_empty(q) && SDpnt->device_busy ==0) {
-		list_for_each_entry(SDpnt, &SHpnt->my_devices, siblings) {
-			if (((SHpnt->can_queue > 0)
-			     && (SHpnt->host_busy >= SHpnt->can_queue))
-			    || (SHpnt->host_blocked)
-			    || (SHpnt->host_self_blocked)
-			    || (SDpnt->device_blocked)) {
+	if (SDpnt->single_lun && blk_queue_empty(q) && SDpnt->device_busy ==0 &&
+			!SHpnt->host_blocked && !SHpnt->host_self_blocked &&
+			!((SHpnt->can_queue > 0) && (SHpnt->host_busy >=
+				       		     SHpnt->can_queue))) {
+		list_for_each_entry(SDpnt2, &SDpnt->same_target_siblings,
+			       same_target_siblings) {
+			if (!SDpnt2->device_blocked &&
+			    !blk_queue_empty(SDpnt2->request_queue)) {
+				__blk_run_queue(SDpnt2->request_queue);
 				break;
 			}
-
-			__blk_run_queue(&SDpnt->request_queue);
 		}
 	}
 
@@ -289,7 +285,7 @@ void scsi_queue_next_request(request_queue_t * q, Scsi_Cmnd * SCpnt)
 			if (SDpnt->device_blocked || !SDpnt->starved) {
 				continue;
 			}
-			__blk_run_queue(&SDpnt->request_queue);
+			__blk_run_queue(SDpnt->request_queue);
 			all_clear = 0;
 		}
 		if (SDpnt == NULL && all_clear) {
@@ -327,7 +323,7 @@ static Scsi_Cmnd *scsi_end_request(Scsi_Cmnd * SCpnt,
 				     int sectors,
 				     int requeue)
 {
-	request_queue_t *q = &SCpnt->device->request_queue;
+	request_queue_t *q = SCpnt->device->request_queue;
 	struct request *req = SCpnt->request;
 	unsigned long flags;
 
@@ -497,7 +493,7 @@ void scsi_io_completion(Scsi_Cmnd * SCpnt, int good_sectors,
 {
 	int result = SCpnt->result;
 	int this_count = SCpnt->bufflen >> 9;
-	request_queue_t *q = &SCpnt->device->request_queue;
+	request_queue_t *q = SCpnt->device->request_queue;
 	struct request *req = SCpnt->request;
 
 	/*
@@ -1094,7 +1090,7 @@ void scsi_unblock_requests(struct Scsi_Host * SHpnt)
 	SHpnt->host_self_blocked = FALSE;
 	/* Now that we are unblocked, try to start the queues. */
 	list_for_each_entry(SDloop, &SHpnt->my_devices, siblings)
-		scsi_queue_next_request(&SDloop->request_queue, NULL);
+		scsi_queue_next_request(SDloop->request_queue, NULL);
 }
 
 /*

drivers/scsi/scsi_scan.c

@@ -371,7 +371,7 @@ static void print_inquiry(unsigned char *inq_result)
  */
 static void scsi_initialize_merge_fn(struct scsi_device *sd)
 {
-	request_queue_t *q = &sd->request_queue;
+	request_queue_t *q = sd->request_queue;
 	struct Scsi_Host *sh = sd->host;
 	struct device *dev = scsi_get_device(sh);
 	u64 bounce_limit;
@@ -407,14 +407,12 @@ static void scsi_initialize_merge_fn(struct scsi_device *sd)
  *     Scsi_Device pointer, or NULL on failure.
  **/
 static struct scsi_device *scsi_alloc_sdev(struct Scsi_Host *shost,
-					   uint channel, uint id, uint lun)
+	       	struct request_queue **q, uint channel, uint id, uint lun)
 {
 	struct scsi_device *sdev, *device;
 
 	sdev = kmalloc(sizeof(*sdev), GFP_ATOMIC);
-	if (sdev == NULL)
-		printk(ALLOC_FAILURE_MSG, __FUNCTION__);
-	else {
+	if (sdev != NULL) {
 		memset(sdev, 0, sizeof(Scsi_Device));
 		sdev->vendor = scsi_null_device_strs;
 		sdev->model = scsi_null_device_strs;
@@ -436,18 +434,32 @@ static struct scsi_device *scsi_alloc_sdev(struct Scsi_Host *shost,
 		 * doesn't
 		 */
 		sdev->borken = 1;
-		if (shost->hostt->slave_alloc)
-			if (shost->hostt->slave_alloc(sdev)) {
-				kfree(sdev);
-				return NULL;
-			}
 
-		scsi_initialize_queue(sdev, shost);
-		sdev->request_queue.queuedata = (void *) sdev;
-
-		scsi_initialize_merge_fn(sdev);
+		if(!q || *q == NULL) {
+			sdev->request_queue = kmalloc(sizeof(struct request_queue), GFP_ATOMIC);
+			if(sdev->request_queue == NULL) {
+				goto out_bail;
+			}
+			memset(sdev->request_queue, 0,
+				       	sizeof(struct request_queue));
+			scsi_initialize_queue(sdev, shost);
+			scsi_initialize_merge_fn(sdev);
+		} else {
+			sdev->request_queue = *q;
+			*q = NULL;
+		}
+		sdev->request_queue->queuedata = sdev;
+		scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
+		scsi_build_commandblocks(sdev);
+		if (sdev->current_queue_depth == 0) {
+			goto out_bail;
+		}
 		init_waitqueue_head(&sdev->scpnt_wait);
 
+		if (shost->hostt->slave_alloc)
+			if (shost->hostt->slave_alloc(sdev)) {
+				goto out_bail;
+			}
 		/*
 		 * If there are any same target siblings, add this to the
 		 * sibling list
@@ -457,15 +469,35 @@ static struct scsi_device *scsi_alloc_sdev(struct Scsi_Host *shost,
 			   device->channel == sdev->channel) {
 				list_add_tail(&sdev->same_target_siblings,
 					      &device->same_target_siblings);
+				sdev->scsi_level = device->scsi_level;
 				break;
 			}
 		}
+		/*
+		 * If there wasn't another lun already configured at this
+		 * target, then default this device to SCSI_2 until we
+		 * know better
+		 */
+		if(!sdev->scsi_level)
+			sdev->scsi_level = SCSI_2;
 		/*
 		 * Add it to the end of the shost->my_devices list.
 		 */
 		list_add_tail(&sdev->siblings, &shost->my_devices);
+		return (sdev);
+	}
+out_bail:
+	printk(ALLOC_FAILURE_MSG, __FUNCTION__);
+	if(q && sdev->request_queue) {
+		*q = sdev->request_queue;
+		sdev->request_queue = NULL;
+	} else if(sdev->request_queue) {
+		blk_cleanup_queue(sdev->request_queue);
+		kfree(sdev->request_queue);
 	}
-	return (sdev);
+	scsi_release_commandblocks(sdev);
+	kfree(sdev);
+	return NULL;
 }
 
 /**
@@ -481,7 +513,10 @@ static void scsi_free_sdev(struct scsi_device *sdev)
 	list_del(&sdev->siblings);
 	list_del(&sdev->same_target_siblings);
 
-	blk_cleanup_queue(&sdev->request_queue);
+	if(sdev->request_queue != NULL) {
+		blk_cleanup_queue(sdev->request_queue);
+		kfree(sdev->request_queue);
+	}
 	scsi_release_commandblocks(sdev);
 	if (sdev->host->hostt->slave_destroy)
 		sdev->host->hostt->slave_destroy(sdev);
@@ -1188,18 +1223,11 @@ static void scsi_probe_lun(Scsi_Request *sreq, char *inq_result,
  *     SCSI_SCAN_NO_RESPONSE: could not allocate or setup a Scsi_Device
  *     SCSI_SCAN_LUN_PRESENT: a new Scsi_Device was allocated and initialized
  **/
-static int scsi_add_lun(Scsi_Device *sdevscan, Scsi_Device **sdevnew,
-			Scsi_Request *sreq, char *inq_result, int *bflags)
+static int scsi_add_lun(Scsi_Device *sdev, Scsi_Request *sreq,
+		char *inq_result, int *bflags)
 {
-	Scsi_Device *sdev;
 	char devname[64];
 
-	sdev = scsi_alloc_sdev(sdevscan->host, sdevscan->channel,
-				     sdevscan->id, sdevscan->lun);
-	if (sdev == NULL)
-		return SCSI_SCAN_NO_RESPONSE;
-
-	sdev->scsi_level = sdevscan->scsi_level;
 	/*
 	 * XXX do not save the inquiry, since it can change underneath us,
 	 * save just vendor/model/rev.
@@ -1210,10 +1238,8 @@ static int scsi_add_lun(Scsi_Device *sdevscan, Scsi_Device **sdevnew,
 	 * scanning run at their own risk, or supply a user level program
 	 * that can correctly scan.
 	 */
-	sdev->inquiry_len = sdevscan->inquiry_len;
 	sdev->inquiry = kmalloc(sdev->inquiry_len, GFP_ATOMIC);
 	if (sdev->inquiry == NULL) {
-		scsi_free_sdev(sdev);
 		return SCSI_SCAN_NO_RESPONSE;
 	}
 
@@ -1335,8 +1361,8 @@ static int scsi_add_lun(Scsi_Device *sdevscan, Scsi_Device **sdevnew,
 	 * function */
 	sdev->max_device_blocked = SCSI_DEFAULT_DEVICE_BLOCKED;
 
-	if (sdevnew != NULL)
-		*sdevnew = sdev;
+	if(sdev->host->hostt->slave_configure)
+		sdev->host->hostt->slave_configure(sdev);
 
 	return SCSI_SCAN_LUN_PRESENT;
 }
@@ -1365,8 +1391,9 @@ static void scsi_remove_lun(struct scsi_device *sdev)
  *         attached at the LUN
  *     SCSI_SCAN_LUN_PRESENT: a new Scsi_Device was allocated and initialized
  **/
-static int scsi_probe_and_add_lun(Scsi_Device *sdevscan, Scsi_Device **sdevnew,
-				  int *bflagsp)
+static int scsi_probe_and_add_lun(struct Scsi_Host *host,
+		struct request_queue **q, uint channel, uint id,
+	       	uint lun, int *bflagsp)
 {
 	Scsi_Device *sdev = NULL;
 	Scsi_Request *sreq = NULL;
@@ -1374,47 +1401,27 @@ static int scsi_probe_and_add_lun(Scsi_Device *sdevscan, Scsi_Device **sdevnew,
 	int bflags;
 	int res;
 
-	/*
-	 * Any command blocks allocated are fixed to use sdevscan->lun,
-	 * so they must be allocated and released if sdevscan->lun
-	 * changes.
-	 *
-	 * XXX optimize and don't call build/release commandblocks, instead
-	 * modify the LUN value of the existing command block - this means
-	 * the build/release calls would be moved to the alloc/free of
-	 * sdevscan, and the modifying function would be called here.
-	 *
-	 * XXX maybe change scsi_release_commandblocks to not reset
-	 * queue_depth to 0.
-	 */
-	sdevscan->new_queue_depth = 1;
-	scsi_build_commandblocks(sdevscan);
-	if (sdevscan->current_queue_depth == 0)
-		goto alloc_failed;
-
-	/*
-	 * Since we reuse the same sdevscan over and over with different
-	 * target and lun values, we have to destroy and then recreate
-	 * any possible low level attachments since they very will might
-	 * also store the id and lun numbers in some form and need updating
-	 * with each scan.
-	 */
-	if (sdevscan->host->hostt->slave_destroy)
-		sdevscan->host->hostt->slave_destroy(sdevscan);
-	if (sdevscan->host->hostt->slave_alloc)
-		sdevscan->host->hostt->slave_alloc(sdevscan);
-	sreq = scsi_allocate_request(sdevscan);
-	if (sreq == NULL)
-		goto alloc_failed;
+	sdev = scsi_alloc_sdev(host, q, channel, id, lun);
+	if (sdev == NULL)
+		return SCSI_SCAN_NO_RESPONSE;
+	sreq = scsi_allocate_request(sdev);
+	if (sreq == NULL) {
+		printk(ALLOC_FAILURE_MSG, __FUNCTION__);
+		res = SCSI_SCAN_NO_RESPONSE;
+		goto bail_out;
+	}
 	/*
 	 * The sreq is for use only with sdevscan.
 	 */
 
 	scsi_result = kmalloc(256, GFP_ATOMIC |
-			      (sdevscan->host->unchecked_isa_dma) ?
+			      (host->unchecked_isa_dma) ?
 			      GFP_DMA : 0);
-	if (scsi_result == NULL)
-		goto alloc_failed;
+	if (scsi_result == NULL) {
+		printk(ALLOC_FAILURE_MSG, __FUNCTION__);
+		res = SCSI_SCAN_NO_RESPONSE;
+		goto bail_out;
+	}
 
 	scsi_probe_lun(sreq, scsi_result, &bflags);
 	if (sreq->sr_result)
@@ -1439,10 +1446,8 @@ static int scsi_probe_and_add_lun(Scsi_Device *sdevscan, Scsi_Device **sdevnew,
 					" no device added\n"));
 			res = SCSI_SCAN_TARGET_PRESENT;
 		} else {
-			res = scsi_add_lun(sdevscan, &sdev, sreq, scsi_result,
-					   &bflags);
+			res = scsi_add_lun(sdev, sreq, scsi_result, &bflags);
 			if (res == SCSI_SCAN_LUN_PRESENT) {
-				BUG_ON(sdev == NULL);
 				if ((bflags & BLIST_KEY) != 0) {
 					sdev->lockable = 0;
 					scsi_unlock_floptical(sreq,
@@ -1452,31 +1457,25 @@ static int scsi_probe_and_add_lun(Scsi_Device *sdevscan, Scsi_Device **sdevnew,
 					 * the INQUIRY data.
 					 */
 				}
-				/*
-				 * "hardcoded" scans of a single LUN need
-				 * to know the sdev just allocated.
-				 */
-				if (sdevnew != NULL)
-					*sdevnew = sdev;
 				if (bflagsp != NULL)
 					*bflagsp = bflags;
 			}
 		}
 	}
-	kfree(scsi_result);
-	scsi_release_request(sreq);
-	scsi_release_commandblocks(sdevscan);
-	return res;
-
-alloc_failed:
-	printk(ALLOC_FAILURE_MSG, __FUNCTION__);
+bail_out:
 	if (scsi_result != NULL)
 		kfree(scsi_result);
 	if (sreq != NULL)
 		scsi_release_request(sreq);
-	if (sdevscan->current_queue_depth != 0)
-		scsi_release_commandblocks(sdevscan);
-	return SCSI_SCAN_NO_RESPONSE;
+	if (res != SCSI_SCAN_LUN_PRESENT) {
+		if(q) {
+			*q = sdev->request_queue;
+			sdev->request_queue = NULL;
+		}
+		scsi_free_sdev(sdev);
+	}
+	return res;
+
 }
 
 /**
@@ -1492,16 +1491,15 @@ static int scsi_probe_and_add_lun(Scsi_Device *sdevscan, Scsi_Device **sdevnew,
  *
  *     Modifies sdevscan->lun.
  **/
-static void scsi_sequential_lun_scan(Scsi_Device *sdevscan, int bflags,
-				     int lun0_res)
+static void scsi_sequential_lun_scan(struct Scsi_Host *shost,
+	       	struct request_queue **q, uint channel, uint id,
+	       	int bflags, int lun0_res, int scsi_level)
 {
-	struct Scsi_Host *shost = sdevscan->host;
-	unsigned int sparse_lun;
-	unsigned int max_dev_lun;
+	unsigned int sparse_lun, lun, max_dev_lun;
 
 	SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: Sequential scan of"
-			" host %d channel %d id %d\n", sdevscan->host->host_no,
-			sdevscan->channel, sdevscan->id));
+			" host %d channel %d id %d\n", shost->host_no,
+			channel, id));
 
 	max_dev_lun = min(max_scsi_luns, shost->max_lun);
 	/*
@@ -1526,11 +1524,19 @@ static void scsi_sequential_lun_scan(Scsi_Device *sdevscan, int bflags,
 	 * If less than SCSI_1_CSS, and no special lun scaning, stop
 	 * scanning; this matches 2.4 behaviour, but could just be a bug
 	 * (to continue scanning a SCSI_1_CSS device).
-	 */
+	 *
+	 * This test is broken.  We might not have any device on lun0 for
+	 * a sparselun device, and if that's the case then how would we
+	 * know the real scsi_level, eh?  It might make sense to just not
+	 * scan any SCSI_1 device for non-0 luns, but that check would best
+	 * go into scsi_alloc_sdev() and just have it return null when asked
+	 * to alloc an sdev for lun > 0 on an already found SCSI_1 device.
+	 *
 	if ((sdevscan->scsi_level < SCSI_1_CCS) &&
 	    ((bflags & (BLIST_FORCELUN | BLIST_SPARSELUN | BLIST_MAX5LUN))
 	     == 0))
 		return;
+	 */
 	/*
 	 * If this device is known to support multiple units, override
 	 * the other settings, and scan all of them.
@@ -1546,7 +1552,7 @@ static void scsi_sequential_lun_scan(Scsi_Device *sdevscan, int bflags,
 	 * Do not scan SCSI-2 or lower device past LUN 7, unless
 	 * BLIST_LARGELUN.
 	 */
-	if ((sdevscan->scsi_level < SCSI_3) && !(bflags & BLIST_LARGELUN))
+	if (scsi_level < SCSI_3 && !(bflags & BLIST_LARGELUN))
 		max_dev_lun = min(8U, max_dev_lun);
 
 	/*
@@ -1554,8 +1560,8 @@ static void scsi_sequential_lun_scan(Scsi_Device *sdevscan, int bflags,
 	 * until we reach the max, or no LUN is found and we are not
 	 * sparse_lun.
 	 */
-	for (sdevscan->lun = 1; sdevscan->lun < max_dev_lun; ++sdevscan->lun)
-		if ((scsi_probe_and_add_lun(sdevscan, NULL, NULL)
+	for (lun = 1; lun < max_dev_lun; ++lun)
+		if ((scsi_probe_and_add_lun(shost, q, channel, id, lun, NULL)
 		     != SCSI_SCAN_LUN_PRESENT) && !sparse_lun)
 			return;
 }
@@ -1608,7 +1614,8 @@ static int scsilun_to_int(ScsiLun *scsilun)
  *     0: scan completed (or no memory, so further scanning is futile)
  *     1: no report lun scan, or not configured
  **/
-static int scsi_report_lun_scan(Scsi_Device *sdevscan)
+static int scsi_report_lun_scan(Scsi_Device *sdev, struct request_queue **q,
+		int bflags)
 {
 #ifdef CONFIG_SCSI_REPORT_LUNS
 
@@ -1625,38 +1632,19 @@ static int scsi_report_lun_scan(Scsi_Device *sdevscan)
 	/*
 	 * Only support SCSI-3 and up devices.
 	 */
-	if (sdevscan->scsi_level < SCSI_3)
+	if (sdev->scsi_level < SCSI_3)
 		return 1;
+	if (bflags & BLIST_NOLUN)
+		return 0;
 
-	sdevscan->new_queue_depth = 1;
-	scsi_build_commandblocks(sdevscan);
-	if (sdevscan->current_queue_depth == 0) {
+	sreq = scsi_allocate_request(sdev);
+	if (sreq == NULL) {
 		printk(ALLOC_FAILURE_MSG, __FUNCTION__);
-		/*
-		 * We are out of memory, don't try scanning any further.
-		 */
 		return 0;
 	}
-	/*
-	 * Since we reuse the same sdevscan over and over with different
-	 * target and lun values, we have to destroy and then recreate
-	 * any possible low level attachments since they very will might
-	 * also store the id and lun numbers in some form and need updating
-	 * with each scan.
-	 *
-	 * This is normally handled in probe_and_add_lun, but since this
-	 * one particular function wants to scan lun 0 on each device
-	 * itself and will possibly pick up a resed sdevscan when doing
-	 * so, it also needs this hack.
-	 */
-	if (sdevscan->host->hostt->slave_destroy)
-		sdevscan->host->hostt->slave_destroy(sdevscan);
-	if (sdevscan->host->hostt->slave_alloc)
-		sdevscan->host->hostt->slave_alloc(sdevscan);
-	sreq = scsi_allocate_request(sdevscan);
-
-	sprintf(devname, "host %d channel %d id %d", sdevscan->host->host_no,
-		sdevscan->channel, sdevscan->id);
+
+	sprintf(devname, "host %d channel %d id %d", sdev->host->host_no,
+		sdev->channel, sdev->id);
 	/*
 	 * Allocate enough to hold the header (the same size as one ScsiLun)
 	 * plus the max number of luns we are requesting.
@@ -1669,11 +1657,11 @@ static int scsi_report_lun_scan(Scsi_Device *sdevscan)
 	 */
 	length = (max_scsi_report_luns + 1) * sizeof(ScsiLun);
 	lun_data = (ScsiLun *) kmalloc(length, GFP_ATOMIC |
-					   (sdevscan->host->unchecked_isa_dma ?
+					   (sdev->host->unchecked_isa_dma ?
 					    GFP_DMA : 0));
 	if (lun_data == NULL) {
 		printk(ALLOC_FAILURE_MSG, __FUNCTION__);
-		scsi_release_commandblocks(sdevscan);
+		scsi_release_request(sreq);
 		/*
 		 * We are out of memory, don't try scanning any further.
 		 */
@@ -1723,7 +1711,6 @@ static int scsi_report_lun_scan(Scsi_Device *sdevscan)
 		    || sreq->sr_sense_buffer[2] != UNIT_ATTENTION)
 			break;
 	}
-	scsi_release_commandblocks(sdevscan);
 
 	if (sreq->sr_result) {
 		/*
@@ -1751,8 +1738,8 @@ static int scsi_report_lun_scan(Scsi_Device *sdevscan)
 		num_luns = (length / sizeof(ScsiLun));
 
 	SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUN scan of"
-			" host %d channel %d id %d\n", sdevscan->host->host_no,
-			sdevscan->channel, sdevscan->id));
+			" host %d channel %d id %d\n", sdev->host->host_no,
+			sdev->channel, sdev->id));
 	/*
 	 * Scan the luns in lun_data. The entry at offset 0 is really
 	 * the header, so start at 1 and go up to and including num_luns.
@@ -1782,22 +1769,22 @@ static int scsi_report_lun_scan(Scsi_Device *sdevscan)
 			/*
 			 * LUN 0 has already been scanned.
 			 */
-		} else if (lun > sdevscan->host->max_lun) {
+		} else if (lun > sdev->host->max_lun) {
 			printk(KERN_WARNING "scsi: %s lun%d has a LUN larger"
 			       " than allowed by the host adapter\n",
 			       devname, lun);
 		} else {
 			int res;
 
-			sdevscan->lun = lun;
-			res = scsi_probe_and_add_lun(sdevscan, NULL, NULL);
+			res = scsi_probe_and_add_lun(sdev->host, q,
+				       	sdev->channel, sdev->id, lun, NULL);
 			if (res == SCSI_SCAN_NO_RESPONSE) {
 				/*
 				 * Got some results, but now none, abort.
 				 */
 				printk(KERN_ERR "scsi: Unexpected response"
 				       " from %s lun %d while scanning, scan"
-				       " aborted\n", devname, sdevscan->lun);
+				       " aborted\n", devname, lun);
 				break;
 			}
 		}
@@ -1814,38 +1801,22 @@ static int scsi_report_lun_scan(Scsi_Device *sdevscan)
 
 int scsi_add_single_device(uint host, uint channel, uint id, uint lun)
 {
-	struct scsi_device *sdevscan, *sdev;
 	struct Scsi_Host *shost;
 	int error = -ENODEV;
+	struct scsi_device *sdev;
 
 	shost = scsi_host_hn_get(host);
 	if (!shost)
 		return -ENODEV;
-	sdev = scsi_find_device(shost, channel, id, lun);
-	if (sdev)
-		goto out;
-
-	error = -ENOMEM;
-	sdevscan = scsi_alloc_sdev(shost, channel, id, lun);
-	if (!sdevscan)
+	if(scsi_find_device(shost, channel, id, lun) != NULL)
 		goto out;
 
-	if(!list_empty(&sdevscan->same_target_siblings)) {
-		sdev = list_entry(&sdevscan->same_target_siblings, Scsi_Device,
-					same_target_siblings);
-		sdevscan->scsi_level = sdev->scsi_level;
-		sdev = NULL;
-	} else
-		sdevscan->scsi_level = SCSI_2;
-	error = scsi_probe_and_add_lun(sdevscan, &sdev, NULL);
-	scsi_free_sdev(sdevscan);
-
-	if (error != SCSI_SCAN_LUN_PRESENT) 
-		goto out;
-
-	scsi_attach_device(sdev);
-	error = 0;
-
+	if (scsi_probe_and_add_lun(shost, NULL, channel, id, lun, NULL) ==
+			SCSI_SCAN_LUN_PRESENT) {
+		error = 0;
+		sdev = scsi_find_device(shost, channel, id, lun);
+		scsi_attach_device(sdev);
+	}
 out:
 	scsi_host_put(shost);
 	return error;
@@ -1898,11 +1869,12 @@ int scsi_remove_single_device(uint host, uint channel, uint id, uint lun)
  *     First try a REPORT LUN scan, if that does not scan the target, do a
  *     sequential scan of LUNs on the target id.
  **/
-static void scsi_scan_target(Scsi_Device *sdevscan, struct Scsi_Host *shost,
+static void scsi_scan_target(struct Scsi_Host *shost, struct request_queue **q,
 			     unsigned int channel, unsigned int id)
 {
-	int bflags;
+	int bflags = 0;
 	int res;
+	struct scsi_device *sdev;
 
 	if (shost->this_id == id)
 		/*
@@ -1910,36 +1882,29 @@ static void scsi_scan_target(Scsi_Device *sdevscan, struct Scsi_Host *shost,
 		 */
 		return;
 
-	sdevscan->host = shost;
-	sdevscan->id = id;
-	sdevscan->channel = channel;
 	/*
 	 * Scan LUN 0, if there is some response, scan further. Ideally, we
 	 * would not configure LUN 0 until all LUNs are scanned.
-	 *
-	 * The scsi_level is set (in scsi_probe_lun) if a target responds.
 	 */
-	sdevscan->lun = 0;
-	res = scsi_probe_and_add_lun(sdevscan, NULL, &bflags);
-	if (res != SCSI_SCAN_NO_RESPONSE) {
-		/*
-		 * Some scsi devices cannot properly handle a lun != 0.
-		 * BLIST_NOLUN also prevents a REPORT LUN from being sent.
-		 * Any multi-lun SCSI-3 device that hangs because of a
-		 * REPORT LUN command is seriously broken.
-		 */
-		if (!(bflags & BLIST_NOLUN))
+	res = scsi_probe_and_add_lun(shost, q, channel, id, 0, &bflags);
+	if (res == SCSI_SCAN_LUN_PRESENT) {
+		sdev = scsi_find_device(shost, channel, id, 0);
+		if (scsi_report_lun_scan(sdev, q, bflags) != 0)
 			/*
-			 * Ending the scan here if max_scsi_luns == 1
-			 * breaks scanning of SPARSE, FORCE, MAX5 LUN
-			 * devices, and the report lun scan.
+			 * The REPORT LUN did not scan the target,
+			 * do a sequential scan.
 			 */
-			if (scsi_report_lun_scan(sdevscan) != 0)
-				/*
-				 * The REPORT LUN did not scan the target,
-				 * do a sequential scan.
-				 */
-				scsi_sequential_lun_scan(sdevscan, bflags, res);
+			scsi_sequential_lun_scan(shost, q, channel, id, bflags,
+				       	res, sdev->scsi_level);
+	} else if (res == SCSI_SCAN_TARGET_PRESENT) {
+		/*
+		 * There's a target here, but lun 0 is offline so we
+		 * can't use the report_lun scan.  Fall back to a
+		 * sequential lun scan with a bflags of SPARSELUN and
+		 * a default scsi level of SCSI_2
+		 */
+		scsi_sequential_lun_scan(shost, q, channel, id, BLIST_SPARSELUN,
+				SCSI_SCAN_TARGET_PRESENT, SCSI_2);
 	}
 }
 
@@ -1953,22 +1918,9 @@ static void scsi_scan_target(Scsi_Device *sdevscan, struct Scsi_Host *shost,
  **/
 void scsi_scan_host(struct Scsi_Host *shost)
 {
-	struct scsi_device *sdevscan;
+	struct request_queue *q = NULL;
 	uint channel, id, order_id;
 
-	/*
-	 * The blk layer queue allocation is a bit expensive to
-	 * repeat for each channel and id - for FCP max_id is near
-	 * 255: each call to scsi_alloc_sdev() implies a call to
-	 * blk_init_queue, and then blk_init_free_list, where 2 *
-	 * queue_nr_requests requests are allocated. Don't do so
-	 * here for scsi_scan_selected_lun, since we end up
-	 * calling select_queue_depths with an extra Scsi_Device
-	 * on the host_queue list.
-	 */
-	sdevscan = scsi_alloc_sdev(shost, 0, 0, 0);
-	if (sdevscan == NULL)
-		return;
 	/*
 	 * The sdevscan host, channel, id and lun are filled in as
 	 * needed to scan.
@@ -1991,11 +1943,13 @@ void scsi_scan_host(struct Scsi_Host *shost)
 				order_id = shost->max_id - id - 1;
 			else
 				order_id = id;
-			scsi_scan_target(sdevscan, shost, channel,
-					 order_id);
+			scsi_scan_target(shost, &q, channel, order_id);
 		}
 	}
-	scsi_free_sdev(sdevscan);
+	if(q) {
+		blk_cleanup_queue(q);
+		kfree(q);
+	}
 }
 
 void scsi_forget_host(struct Scsi_Host *shost)
@@ -2030,19 +1984,11 @@ struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost)
 {
 	struct scsi_device *sdev;
 
-	sdev = scsi_alloc_sdev(shost, 0, shost->this_id, 0);
+	sdev = scsi_alloc_sdev(shost, NULL, 0, shost->this_id, 0);
 	if (sdev) {
-		scsi_build_commandblocks(sdev);
-		if (sdev->current_queue_depth == 0)
-			goto fail;
 		sdev->borken = 0;
 	}
-
 	return sdev;
-
-fail:
-	kfree(sdev);
-	return NULL;
 }
 
 /*

drivers/scsi/sd.c

@@ -301,10 +301,10 @@ static int sd_init_command(struct scsi_cmnd * SCpnt)
 	
 	if (block > 0xffffffff) {
 		SCpnt->cmnd[0] += READ_16 - READ_6;
-		SCpnt->cmnd[2] = (unsigned char) (block >> 56) & 0xff;
-		SCpnt->cmnd[3] = (unsigned char) (block >> 48) & 0xff;
-		SCpnt->cmnd[4] = (unsigned char) (block >> 40) & 0xff;
-		SCpnt->cmnd[5] = (unsigned char) (block >> 32) & 0xff;
+		SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
+		SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
+		SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
+		SCpnt->cmnd[5] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
 		SCpnt->cmnd[6] = (unsigned char) (block >> 24) & 0xff;
 		SCpnt->cmnd[7] = (unsigned char) (block >> 16) & 0xff;
 		SCpnt->cmnd[8] = (unsigned char) (block >> 8) & 0xff;
@@ -931,7 +931,7 @@ sd_read_capacity(struct scsi_disk *sdkp, char *diskname,
 		if (longrc) {
 			memset((void *) cmd, 0, 16);
 			cmd[0] = SERVICE_ACTION_IN;
-			cmd[1] = 0x10; /* READ CAPACITY (16) */
+			cmd[1] = SAI_READ_CAPACITY_16;
 			cmd[13] = 12;
 			memset((void *) buffer, 0, 12);
 		} else {
@@ -1002,21 +1002,25 @@ sd_read_capacity(struct scsi_disk *sdkp, char *diskname,
 		sector_size = (buffer[4] << 24) |
 			(buffer[5] << 16) | (buffer[6] << 8) | buffer[7];
 		if (buffer[0] == 0xff && buffer[1] == 0xff &&
-			buffer[2] == 0xff && buffer[3] == 0xff) {
-			printk(KERN_NOTICE "%s : very big device. try to use"
-				" READ CAPACITY(16).\n", diskname);
-			longrc = 1;
-			goto repeat;
+		    buffer[2] == 0xff && buffer[3] == 0xff) {
+			if(sizeof(sdkp->capacity) > 4) {
+				printk(KERN_NOTICE "%s : very big device. try to use"
+				       " READ CAPACITY(16).\n", diskname);
+				longrc = 1;
+				goto repeat;
+			} else {
+				printk(KERN_ERR "%s: too big for kernel.  Assuming maximum 2Tb\n", diskname);
+			}
 		}
 		sdkp->capacity = 1 + (((sector_t)buffer[0] << 24) |
 			(buffer[1] << 16) |
 			(buffer[2] << 8) |
 			buffer[3]);			
 	} else {
-		sdkp->capacity = 1 + (((sector_t)buffer[0] << 56) |
-			((sector_t)buffer[1] << 48) |
-			((sector_t)buffer[2] << 40) |
-			((sector_t)buffer[3] << 32) |
+		sdkp->capacity = 1 + (((u64)buffer[0] << 56) |
+			((u64)buffer[1] << 48) |
+			((u64)buffer[2] << 40) |
+			((u64)buffer[3] << 32) |
 			((sector_t)buffer[4] << 24) |
 			((sector_t)buffer[5] << 16) |
 			((sector_t)buffer[6] << 8)  |
@@ -1056,7 +1060,7 @@ sd_read_capacity(struct scsi_disk *sdkp, char *diskname,
 		 */
 		int hard_sector = sector_size;
 		sector_t sz = sdkp->capacity * (hard_sector/256);
-		request_queue_t *queue = &sdp->request_queue;
+		request_queue_t *queue = sdp->request_queue;
 		sector_t mb;
 
 		blk_queue_hardsect_size(queue, hard_sector);
@@ -1291,7 +1295,7 @@ static int sd_attach(struct scsi_device * sdp)
 	if (sdp->removable)
 		gd->flags |= GENHD_FL_REMOVABLE;
 	gd->private_data = &sdkp->driver;
-	gd->queue = &sdkp->device->request_queue;
+	gd->queue = sdkp->device->request_queue;
 
 	sd_devlist_insert(sdkp);
 	set_capacity(gd, sdkp->capacity);

drivers/scsi/sg.c

@@ -695,7 +695,7 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
 	}
 
 	srp->my_cmdp = SRpnt;
-	q = &SRpnt->sr_device->request_queue;
+	q = SRpnt->sr_device->request_queue;
 	SRpnt->sr_request->rq_disk = sdp->disk;
 	SRpnt->sr_sense_buffer[0] = 0;
 	SRpnt->sr_cmd_len = hp->cmd_len;

drivers/scsi/sr.c

@@ -563,7 +563,7 @@ static int sr_attach(struct scsi_device *sdev)
 	register_cdrom(&cd->cdi);
 	set_capacity(disk, cd->capacity);
 	disk->private_data = &cd->driver;
-	disk->queue = &sdev->request_queue;
+	disk->queue = sdev->request_queue;
 
 	add_disk(disk);
 	sr_devlist_insert(cd);
@@ -672,7 +672,7 @@ static void get_sectorsize(struct scsi_cd *cd)
 		set_capacity(cd->disk, cd->capacity);
 	}
 
-	queue = &cd->device->request_queue;
+	queue = cd->device->request_queue;
 	blk_queue_hardsect_size(queue, sector_size);
 out:
 	kfree(buffer);

include/scsi/scsi.h

@@ -99,6 +99,8 @@ extern const unsigned char scsi_command_size[8];
 #define READ_16               0x88
 #define WRITE_16              0x8a
 #define SERVICE_ACTION_IN     0x9e
+/* values for service action in */
+#define	SAI_READ_CAPACITY_16  0x10
 
 
 /*