Skip to content

L
linux
Commit 703cc5df authored by Tomi Valkeinen's avatar Tomi Valkeinen
Browse files
Options

Merge branch '3.15/dss-dt-dts' into 3.15/fbdev 

OMAP DSS related .dts changes
parents 17d5ca91 1133420f
Show whitespace changes
Inline Side-by-side
Showing with 3793 additions and 245 deletions
Documentation/devicetree/bindings/arm/omap/dmm.txt 0 → 100644
View file @ 703cc5df
OMAP Dynamic Memory Manager (DMM) bindings
The dynamic memory manager (DMM) is a module located immediately in front of the
SDRAM controllers (called EMIFs on OMAP). DMM manages various aspects of memory
accesses such as priority generation amongst initiators, configuration of SDRAM
interleaving, optimizing transfer of 2D block objects, and provide MMU-like page
translation for initiators which need contiguous dma bus addresses.
Required properties:
- compatible: Should contain "ti,omap4-dmm" for OMAP4 family
Should contain "ti,omap5-dmm" for OMAP5 and DRA7x family
- reg: Contains DMM register address range (base address and length)
- interrupts: Should contain an interrupt-specifier for DMM_IRQ.
- ti,hwmods: Name of the hwmod associated to DMM, which is typically "dmm"
Example:
dmm@4e000000 {
compatible = "ti,omap4-dmm";
reg = <0x4e000000 0x800>;
ti,hwmods = "dmm";
};
Documentation/devicetree/bindings/arm/omap/omap.txt
View file @ 703cc5df
......@@ -99,6 +99,9 @@ Boards:
- OMAP4 PandaBoard : Low cost community board
compatible = "ti,omap4-panda", "ti,omap4430"
- OMAP4 DuoVero with Parlor : Commercial expansion board with daughter board
compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
compatible = "ti,omap3-evm", "ti,omap3"
......@@ -114,5 +117,8 @@ Boards:
- AM43x EPOS EVM
compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
- AM437x GP EVM
compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43"
- DRA7 EVM: Software Developement Board for DRA7XX
compatible = "ti,dra7-evm", "ti,dra7"
Documentation/devicetree/bindings/usb/ehci-omap.txt
View file @ 703cc5df
......@@ -21,7 +21,7 @@ Documentation/devicetree/bindings/mfd/omap-usb-host.txt
Example for OMAP4:
usbhsehci: ehci@4a064c00 {
compatible = "ti,ehci-omap", "usb-ehci";
compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupts = <0 77 0x4>;
};
......
Documentation/devicetree/bindings/usb/ohci-omap3.txt
View file @ 703cc5df
......@@ -9,7 +9,7 @@ Required properties:
Example for OMAP4:
usbhsohci: ohci@4a064800 {
compatible = "ti,ohci-omap3", "usb-ohci";
compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupts = <0 76 0x4>;
};
arch/arm/boot/dts/Makefile
View file @ 703cc5df
......@@ -199,6 +199,10 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap2420-n810-wimax.dtb \
omap3430-sdp.dtb \
omap3-beagle.dtb \
omap3-cm-t3517.dtb \
omap3-sbc-t3517.dtb \
omap3-cm-t3530.dtb \
omap3-sbc-t3530.dtb \
omap3-cm-t3730.dtb \
omap3-sbc-t3730.dtb \
omap3-devkit8000.dtb \
......@@ -214,7 +218,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-gta04.dtb \
omap3-igep0020.dtb \
omap3-igep0030.dtb \
omap3-lilly-dbb056.dtb \
omap3-zoom3.dtb \
omap4-duovero-parlor.dtb \
omap4-panda.dtb \
omap4-panda-a4.dtb \
omap4-panda-es.dtb \
......@@ -228,9 +234,11 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
am335x-boneblack.dtb \
am335x-nano.dtb \
am335x-base0033.dtb \
am3517-craneboard.dtb \
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
am43x-epos-evm.dtb \
am437x-gp-evm.dtb \
dra7-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
......
arch/arm/boot/dts/am335x-evm.dts
View file @ 703cc5df
......@@ -260,6 +260,12 @@ davinci_mdio_sleep: davinci_mdio_sleep {
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
lcd_pins_s0: lcd_pins_s0 {
pinctrl-single,pins = <
0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
......@@ -434,9 +440,9 @@ &gpmc {
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
nand@0,0 {
reg = <0 0 0>; /* CS0, offset 0 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
gpmc,device-nand = "true";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
......@@ -460,50 +466,51 @@ nand@0,0 {
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
/* MTD partition table */
/* All SPL-* partitions are sized to minimal length
* which can be independently programmable. For
* NAND flash this is equal to size of erase-block */
#address-cells = <1>;
#size-cells = <1>;
elm_id = <&elm>;
/* MTD partition table */
partition@0 {
label = "SPL1";
label = "NAND.SPL";
reg = <0x00000000 0x000020000>;
};
partition@1 {
label = "SPL2";
label = "NAND.SPL.backup1";
reg = <0x00020000 0x00020000>;
};
partition@2 {
label = "SPL3";
label = "NAND.SPL.backup2";
reg = <0x00040000 0x00020000>;
};
partition@3 {
label = "SPL4";
label = "NAND.SPL.backup3";
reg = <0x00060000 0x00020000>;
};
partition@4 {
label = "U-boot";
reg = <0x00080000 0x001e0000>;
label = "NAND.u-boot-spl";
reg = <0x00080000 0x00040000>;
};
partition@5 {
label = "environment";
reg = <0x00260000 0x00020000>;
label = "NAND.u-boot";
reg = <0x000C0000 0x00100000>;
};
partition@6 {
label = "Kernel";
reg = <0x00280000 0x00500000>;
label = "NAND.u-boot-env";
reg = <0x001C0000 0x00020000>;
};
partition@7 {
label = "File-System";
reg = <0x00780000 0x0F880000>;
label = "NAND.u-boot-env.backup1";
reg = <0x001E0000 0x00020000>;
};
partition@8 {
label = "NAND.kernel";
reg = <0x00200000 0x00800000>;
};
partition@9 {
label = "NAND.file-system";
reg = <0x00A00000 0x0F600000>;
};
};
};
......@@ -643,6 +650,9 @@ &mmc1 {
status = "okay";
vmmc-supply = <&vmmc_reg>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
&sham {
......
arch/arm/boot/dts/am335x-evmsk.dts
View file @ 703cc5df
......@@ -45,6 +45,18 @@ lis3_reg: fixedregulator@1 {
regulator-boot-on;
};
wl12xx_vmmc: fixedregulator@2 {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_gpio>;
compatible = "regulator-fixed";
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 29 0>;
startup-delay-us = <70000>;
enable-active-high;
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&user_leds_s0>;
......@@ -270,6 +282,24 @@ mcasp1_pins: mcasp1_pins {
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
>;
};
};
&uart0 {
......@@ -342,9 +372,22 @@ usb-phy@47401300 {
status = "okay";
};
usb-phy@47401b00 {
status = "okay";
};
usb@47401000 {
status = "okay";
};
usb@47401800 {
status = "okay";
dr_mode = "host";
};
dma-controller@07402000 {
status = "okay";
};
};
&epwmss2 {
......@@ -440,6 +483,7 @@ &mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
dual_emac = <1>;
};
&davinci_mdio {
......@@ -451,11 +495,13 @@ &davinci_mdio {
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <2>;
};
&mmc1 {
......@@ -479,6 +525,16 @@ &gpio0 {
ti,no-reset-on-init;
};
&mmc2 {
status = "okay";
vmmc-supply = <&wl12xx_vmmc>;
ti,non-removable;
bus-width = <4>;
cap-power-off-card;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
};
&mcasp1 {
pinctrl-names = "default";
pinctrl-0 = <&mcasp1_pins>;
......
arch/arm/boot/dts/am33xx.dtsi
View file @ 703cc5df
......@@ -58,6 +58,10 @@ cpu@0 {
275000 1125000
>;
voltage-tolerance = <2>; /* 2 percentage */
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
clock-latency = <300000>; /* From omap-cpufreq driver */
};
};
......@@ -318,6 +322,7 @@ hwspinlock: spinlock@480ca000 {
compatible = "ti,omap4-hwspinlock";
reg = <0x480ca000 0x1000>;
ti,hwmods = "spinlock";
#hwlock-cells = <1>;
};
wdt2: wdt@44e35000 {
......@@ -399,7 +404,7 @@ timer7: timer@4804a000 {
ti,timer-pwm;
};
rtc@44e3e000 {
rtc: rtc@44e3e000 {
compatible = "ti,da830-rtc";
reg = <0x44e3e000 0x1000>;
interrupts = <75
......@@ -582,6 +587,8 @@ ecap0: ecap@48300100 {
compatible = "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
interrupts = <31>;
interrupt-names = "ecap0";
ti,hwmods = "ecap0";
status = "disabled";
};
......@@ -610,6 +617,8 @@ ecap1: ecap@48302100 {
compatible = "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
interrupts = <47>;
interrupt-names = "ecap1";
ti,hwmods = "ecap1";
status = "disabled";
};
......@@ -638,6 +647,8 @@ ecap2: ecap@48304100 {
compatible = "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
interrupts = <61>;
interrupt-names = "ecap2";
ti,hwmods = "ecap2";
status = "disabled";
};
......
arch/arm/boot/dts/am3517-craneboard.dts 0 → 100644
View file @ 703cc5df
/*
* See craneboard.org for more details
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "am3517.dtsi"
/ {
model = "TI AM3517 CraneBoard (TMDSEVM3517)";
compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
vbat: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
};
&davinci_emac {
status = "okay";
};
&davinci_mdio {
status = "okay";
};
&i2c1 {
clock-frequency = <2600000>;
tps: tps@2d {
reg = <0x2d>;
};
};
&i2c2 {
clock-frequency = <400000>;
/* goes to expansion connector */
status = "disabled";
};
&i2c3 {
clock-frequency = <400000>;
/* goes to expansion connector */
status = "disabled";
};
&mmc1 {
vmmc-supply = <&vdd2_reg>;
bus-width = <8>;
};
&mmc2 {
/* goes to expansion connector */
status = "disabled";
};
&mmc3 {
/* goes to expansion connector */
status = "disabled";
};
#include "tps65910.dtsi"
&omap3_pmx_core {
tps_pins: pinmux_tps_pins {
pinctrl-single,pins = <
0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
>;
};
};
&tps {
pinctrl-names = "default";
pinctrl-0 = <&tps_pins>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
ti,en-ck32k-xtal;
vcc1-supply = <&vbat>;
vcc2-supply = <&vbat>;
vcc3-supply = <&vbat>;
vcc4-supply = <&vbat>;
vcc5-supply = <&vbat>;
vcc6-supply = <&vbat>;
vcc7-supply = <&vbat>;
vccio-supply = <&vbat>;
regulators {
vrtc_reg: regulator@0 {
regulator-always-on;
};
vio_reg: regulator@1 {
regulator-always-on;
};
/*
* Unused:
* VDIG1=2.7V,300mA max
* VDIG2=1.8V,300mA max
*/
vpll_reg: regulator@7 {
/* VDDS_DPLL_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vaux1_reg: regulator@9 {
/* VDDS_SRAM_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vaux2_reg: regulator@10 {
/* VDDA1P8V_USBPHY */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
/* VAUX33 unused */
vdac_reg: regulator@8 {
/* VDDA_DAC_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vmmc_reg: regulator@12 {
/* VDDA3P3V_USBPHY */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd1_reg: regulator@2 {
/* VDD_CORE */
regulator-name = "vdd_core";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
};
vdd2_reg: regulator@3 {
/* VDDSHV_3V3 */
regulator-name = "vdd_shv";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
/* VDD3 unused */
};
};
arch/arm/boot/dts/am4372.dtsi
View file @ 703cc5df
......@@ -8,6 +8,7 @@
* kind, whether express or implied.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
......@@ -33,6 +34,11 @@ cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
clock-latency = <300000>; /* From omap-cpufreq driver */
};
};
......@@ -351,6 +357,13 @@ gpio5: gpio@48322000 {
status = "disabled";
};
hwspinlock: spinlock@480ca000 {
compatible = "ti,omap4-hwspinlock";
reg = <0x480ca000 0x1000>;
ti,hwmods = "spinlock";
#hwlock-cells = <1>;
};
i2c0: i2c@44e0b000 {
compatible = "ti,am4372-i2c","ti,omap4-i2c";
reg = <0x44e0b000 0x1000>;
......@@ -521,6 +534,7 @@ epwmss0: epwmss@48300000 {
ecap0: ecap@48300100 {
compatible = "ti,am4372-ecap","ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
ti,hwmods = "ecap0";
status = "disabled";
......@@ -528,6 +542,7 @@ ecap0: ecap@48300100 {
ehrpwm0: ehrpwm@48300200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
ti,hwmods = "ehrpwm0";
status = "disabled";
......@@ -545,6 +560,7 @@ epwmss1: epwmss@48302000 {
ecap1: ecap@48302100 {
compatible = "ti,am4372-ecap","ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
ti,hwmods = "ecap1";
status = "disabled";
......@@ -552,6 +568,7 @@ ecap1: ecap@48302100 {
ehrpwm1: ehrpwm@48302200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
ti,hwmods = "ehrpwm1";
status = "disabled";
......@@ -569,6 +586,7 @@ epwmss2: epwmss@48304000 {
ecap2: ecap@48304100 {
compatible = "ti,am4372-ecap","ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
ti,hwmods = "ecap2";
status = "disabled";
......@@ -576,6 +594,7 @@ ecap2: ecap@48304100 {
ehrpwm2: ehrpwm@48304200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
ti,hwmods = "ehrpwm2";
status = "disabled";
......@@ -593,6 +612,7 @@ epwmss3: epwmss@48306000 {
ehrpwm3: ehrpwm@48306200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48306200 0x80>;
ti,hwmods = "ehrpwm3";
status = "disabled";
......@@ -610,6 +630,7 @@ epwmss4: epwmss@48308000 {
ehrpwm4: ehrpwm@48308200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48308200 0x80>;
ti,hwmods = "ehrpwm4";
status = "disabled";
......@@ -627,6 +648,7 @@ epwmss5: epwmss@4830a000 {
ehrpwm5: ehrpwm@4830a200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x4830a200 0x80>;
ti,hwmods = "ehrpwm5";
status = "disabled";
......@@ -689,6 +711,30 @@ mcasp1: mcasp@4803C000 {
<&edma 11>;
dma-names = "tx", "rx";
};
elm: elm@48080000 {
compatible = "ti,am3352-elm";
reg = <0x48080000 0x2000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "elm";
clocks = <&l4ls_gclk>;
clock-names = "fck";
status = "disabled";
};
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
clocks = <&l3s_gclk>;
clock-names = "fck";
reg = <0x50000000 0x2000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
gpmc,num-cs = <7>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
status = "disabled";
};
};
};
......
arch/arm/boot/dts/am437x-gp-evm.dts 0 → 100644
View file @ 703cc5df
/*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* AM437x GP EVM */
/dts-v1/;
#include "am4372.dtsi"
#include <dt-bindings/pinctrl/am43xx.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/gpio/gpio.h>
/ {
model = "TI AM437x GP EVM";
compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
vmmcsd_fixed: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
};
backlight {
compatible = "pwm-backlight";
pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
matrix_keypad: matrix_keypad@0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
linux,keymap = <0x00000201 /* P1 */
0x00010202 /* P2 */
0x01000067 /* UP */
0x0101006a /* RIGHT */
0x02000069 /* LEFT */
0x0201006c>; /* DOWN */
};
};
&am43xx_pinmux {
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: i2c1_pins {
pinctrl-single,pins = <
0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
>;
};
};
&i2c0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
};
&i2c1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
};
&epwmss0 {
status = "okay";
};
&ecap0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ecap0_pins>;
};
&gpio0 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&gpio4 {
status = "okay";
};
&mmc1 {
status = "okay";
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
arch/arm/boot/dts/am43x-epos-evm.dts
View file @ 703cc5df
......@@ -13,6 +13,7 @@
#include "am4372.dtsi"
#include <dt-bindings/pinctrl/am43xx.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
/ {
model = "TI AM43x EPOS EVM";
......@@ -79,6 +80,64 @@ i2c0_pins: pinmux_i2c0_pins {
0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
nand_flash_x8: nand_flash_x8 {
pinctrl-single,pins = <
0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */
0x0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
0x4 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
0x8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
0xc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */
0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */
>;
};
spi0_pins: pinmux_spi0_pins {
pinctrl-single,pins = <
0x150 (PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */
0x154 (PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
0x158 (PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
0x15c (PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
>;
};
spi1_pins: pinmux_spi1_pins {
pinctrl-single,pins = <
0x190 (PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */
0x194 (PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
0x198 (PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
0x19c (PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
};
matrix_keypad: matrix_keypad@0 {
......@@ -113,12 +172,22 @@ &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */
0x0203006c /* DOWN */
0x03030069>; /* LEFT */
};
backlight {
compatible = "pwm-backlight";
pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
};
&mmc1 {
status = "okay";
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
&mac {
......@@ -169,6 +238,12 @@ pixcir_ts@5c {
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay";
};
&gpio0 {
status = "okay";
};
......@@ -184,3 +259,111 @@ &gpio2 {
&gpio3 {
status = "okay";
};
&elm {
status = "okay";
};
&gpmc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nand_flash_x8>;
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
nand@0,0 {
reg = <0 0 0>; /* CS0, offset 0 */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
gpmc,cs-wr-off-ns = <40>;
gpmc,adv-on-ns = <0>; /* cs-on-ns */
gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
gpmc,we-on-ns = <0>; /* cs-on-ns */
gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
gpmc,oe-on-ns = <3>; /* cs-on-ns + tRR + 2 */
gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
gpmc,access-ns = <30>; /* tCEA + 4*/
gpmc,rd-cycle-ns = <40>;
gpmc,wr-cycle-ns = <40>;
gpmc,wait-on-read = "true";
gpmc,wait-on-write = "true";
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
/* MTD partition table */
/* All SPL-* partitions are sized to minimal length
* which can be independently programmable. For
* NAND flash this is equal to size of erase-block */
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "NAND.SPL";
reg = <0x00000000 0x00040000>;
};
partition@1 {
label = "NAND.SPL.backup1";
reg = <0x00040000 0x00040000>;
};
partition@2 {
label = "NAND.SPL.backup2";
reg = <0x00080000 0x00040000>;
};
partition@3 {
label = "NAND.SPL.backup3";
reg = <0x000C0000 0x00040000>;
};
partition@4 {
label = "NAND.u-boot-spl-os";
reg = <0x00100000 0x00080000>;
};
partition@5 {
label = "NAND.u-boot";
reg = <0x00180000 0x00100000>;
};
partition@6 {
label = "NAND.u-boot-env";
reg = <0x00280000 0x00040000>;
};
partition@7 {
label = "NAND.u-boot-env.backup1";
reg = <0x002C0000 0x00040000>;
};
partition@8 {
label = "NAND.kernel";
reg = <0x00300000 0x00700000>;
};
partition@9 {
label = "NAND.file-system";
reg = <0x00800000 0x1F600000>;
};
};
};
&epwmss0 {
status = "okay";
};
&ecap0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ecap0_pins>;
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
status = "okay";
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
status = "okay";
};
arch/arm/boot/dts/dra7.dtsi
View file @ 703cc5df
......@@ -47,6 +47,11 @@ cpu0: cpu@0 {
1000000 1060000
1176000 1160000
>;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
clock-latency = <300000>; /* From omap-cpufreq driver */
};
cpu@1 {
device_type = "cpu";
......@@ -464,6 +469,20 @@ wdt2: wdt@4ae14000 {
ti,hwmods = "wd_timer2";
};
hwspinlock: spinlock@4a0f6000 {
compatible = "ti,omap4-hwspinlock";
reg = <0x4a0f6000 0x1000>;
ti,hwmods = "spinlock";
#hwlock-cells = <1>;
};
dmm@4e000000 {
compatible = "ti,omap5-dmm";
reg = <0x4e000000 0x800>;
interrupts = <0 113 0x4>;
ti,hwmods = "dmm";
};
i2c1: i2c@48070000 {
compatible = "ti,omap4-i2c";
reg = <0x48070000 0x100>;
......@@ -559,6 +578,138 @@ mmc4: mmc@480d1000 {
status = "disabled";
};
abb_mpu: regulator-abb-mpu {
compatible = "ti,abb-v3";
regulator-name = "abb_mpu";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
<0x4ae06014 0x4>, <0x4a003b20 0x8>,
<0x4ae0c158 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x80>;
/* LDOVBBMPU_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBMPU_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1060000 0 0x0 0 0x02000000 0x01F00000
1160000 0 0x4 0 0x02000000 0x01F00000
1210000 0 0x8 0 0x02000000 0x01F00000
>;
};
abb_ivahd: regulator-abb-ivahd {
compatible = "ti,abb-v3";
regulator-name = "abb_ivahd";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
<0x4ae06010 0x4>, <0x4a0025cc 0x8>,
<0x4a002470 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x40000000>;
/* LDOVBBIVA_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBIVA_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1055000 0 0x0 0 0x02000000 0x01F00000
1150000 0 0x4 0 0x02000000 0x01F00000
1250000 0 0x8 0 0x02000000 0x01F00000
>;
};
abb_dspeve: regulator-abb-dspeve {
compatible = "ti,abb-v3";
regulator-name = "abb_dspeve";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
<0x4ae06010 0x4>, <0x4a0025e0 0x8>,
<0x4a00246c 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x20000000>;
/* LDOVBBDSPEVE_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBDSPEVE_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1055000 0 0x0 0 0x02000000 0x01F00000
1150000 0 0x4 0 0x02000000 0x01F00000
1250000 0 0x8 0 0x02000000 0x01F00000
>;
};
abb_gpu: regulator-abb-gpu {
compatible = "ti,abb-v3";
regulator-name = "abb_gpu";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
<0x4ae06010 0x4>, <0x4a003b08 0x8>,
<0x4ae0c154 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x10000000>;
/* LDOVBBGPU_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBGPU_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1090000 0 0x0 0 0x02000000 0x01F00000
1210000 0 0x4 0 0x02000000 0x01F00000
1280000 0 0x8 0 0x02000000 0x01F00000
>;
};
mcspi1: spi@48098000 {
compatible = "ti,omap4-mcspi";
reg = <0x48098000 0x200>;
......
arch/arm/boot/dts/omap2.dtsi
View file @ 703cc5df
......@@ -271,5 +271,36 @@ timer12: timer@4808a000 {
ti,hwmods = "timer12";
ti,timer-pwm;
};
dss: dss@48050000 {
compatible = "ti,omap2-dss";
reg = <0x48050000 0x400>;
status = "disabled";
ti,hwmods = "dss_core";
#address-cells = <1>;
#size-cells = <1>;
ranges;
dispc@48050400 {
compatible = "ti,omap2-dispc";
reg = <0x48050400 0x400>;
interrupts = <25>;
ti,hwmods = "dss_dispc";
};
rfbi: encoder@48050800 {
compatible = "ti,omap2-rfbi";
reg = <0x48050800 0x400>;
status = "disabled";
ti,hwmods = "dss_rfbi";
};
venc: encoder@48050c00 {
compatible = "ti,omap2-venc";
reg = <0x48050c00 0x400>;
status = "disabled";
ti,hwmods = "dss_venc";
};
};
};
};
arch/arm/boot/dts/omap2420.dtsi
View file @ 703cc5df
......@@ -99,6 +99,7 @@ mcbsp1: mcbsp@48074000 {
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp2: mcbsp@48076000 {
......@@ -112,6 +113,7 @@ mcbsp2: mcbsp@48076000 {
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
status = "disabled";
};
msdi1: mmc@4809c000 {
......
arch/arm/boot/dts/omap2430.dtsi
View file @ 703cc5df
......@@ -113,6 +113,7 @@ mcbsp1: mcbsp@48074000 {
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp2: mcbsp@48076000 {
......@@ -128,6 +129,7 @@ mcbsp2: mcbsp@48076000 {
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp3: mcbsp@4808c000 {
......@@ -143,6 +145,7 @@ mcbsp3: mcbsp@4808c000 {
dmas = <&sdma 17>,
<&sdma 18>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp4: mcbsp@4808e000 {
......@@ -158,6 +161,7 @@ mcbsp4: mcbsp@4808e000 {
dmas = <&sdma 19>,
<&sdma 20>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp5: mcbsp@48096000 {
......@@ -173,6 +177,7 @@ mcbsp5: mcbsp@48096000 {
dmas = <&sdma 21>,
<&sdma 22>;
dma-names = "tx", "rx";
status = "disabled";
};
mmc1: mmc@4809c000 {
......
arch/arm/boot/dts/omap3-beagle-xm.dts
View file @ 703cc5df
......@@ -24,6 +24,11 @@ memory {
reg = <0x80000000 0x20000000>; /* 512 MB */
};
aliases {
display0 = &dvi0;
display1 = &tv0;
};
leds {
compatible = "gpio-leds";
......@@ -86,6 +91,60 @@ hsusb2_phy: hsusb2_phy {
reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
vcc-supply = <&hsusb2_power>;
};
tfp410: encoder@0 {
compatible = "ti,tfp410";
powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
/* XXX pinctrl from twl */
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tfp410_in: endpoint@0 {
remote-endpoint = <&dpi_out>;
};
};
port@1 {
reg = <1>;
tfp410_out: endpoint@0 {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
dvi0: connector@0 {
compatible = "dvi-connector";
label = "dvi";
digital;
ddc-i2c-bus = <&i2c3>;
port {
dvi_connector_in: endpoint {
remote-endpoint = <&tfp410_out>;
};
};
};
tv0: connector@1 {
compatible = "svideo-connector";
label = "tv";
port {
tv_connector_in: endpoint {
remote-endpoint = <&venc_out>;
};
};
};
};
&omap3_pmx_wkup {
......@@ -94,6 +153,17 @@ gpio1_pins: pinmux_gpio1_pins {
0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
>;
};
dss_dpi_pins2: pinmux_dss_dpi_pins1 {
pinctrl-single,pins = <
0x0a (PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
0x0c (PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
0x10 (PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
0x12 (PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
0x14 (PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
0x16 (PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
>;
};
};
&omap3_pmx_core {
......@@ -119,6 +189,35 @@ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_d
OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
>;
};
dss_dpi_pins1: pinmux_dss_dpi_pins2 {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */
>;
};
};
&omap3_pmx_core2 {
......@@ -164,15 +263,6 @@ &i2c2 {
&i2c3 {
clock-frequency = <100000>;
/*
* Display monitor features are burnt in the EEPROM
* as EDID data.
*/
eeprom@50 {
compatible = "ti,eeprom";
reg = <0x50>;
};
};
&mmc1 {
......@@ -234,3 +324,37 @@ &vaux2 {
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
&mcbsp2 {
status = "okay";
};
&dss {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <
&dss_dpi_pins1
&dss_dpi_pins2
>;
port {
dpi_out: endpoint {
remote-endpoint = <&tfp410_in>;
data-lines = <24>;
};
};
};
&venc {
status = "ok";
vdda-supply = <&vdac>;
port {
venc_out: endpoint {
remote-endpoint = <&tv_connector_in>;
ti,channels = <2>;
};
};
};
arch/arm/boot/dts/omap3-beagle.dts
View file @ 703cc5df
......@@ -24,6 +24,11 @@ memory {
reg = <0x80000000 0x10000000>; /* 256 MB */
};
aliases {
display0 = &dvi0;
display1 = &tv0;
};
leds {
compatible = "gpio-leds";
pmu_stat {
......@@ -80,6 +85,61 @@ user {
};
};
tfp410: encoder@0 {
compatible = "ti,tfp410";
powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
pinctrl-names = "default";
pinctrl-0 = <&tfp410_pins>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tfp410_in: endpoint@0 {
remote-endpoint = <&dpi_out>;
};
};
port@1 {
reg = <1>;
tfp410_out: endpoint@0 {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
dvi0: connector@0 {
compatible = "dvi-connector";
label = "dvi";
digital;
ddc-i2c-bus = <&i2c3>;
port {
dvi_connector_in: endpoint {
remote-endpoint = <&tfp410_out>;
};
};
};
tv0: connector@1 {
compatible = "svideo-connector";
label = "tv";
port {
tv_connector_in: endpoint {
remote-endpoint = <&venc_out>;
};
};
};
};
&omap3_pmx_wkup {
......@@ -113,6 +173,45 @@ uart3_pins: pinmux_uart3_pins {
0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
tfp410_pins: pinmux_tfp410_pins {
pinctrl-single,pins = <
0x194 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
>;
};
dss_dpi_pins: pinmux_dss_dpi_pins {
pinctrl-single,pins = <
0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
>;
};
};
&omap3_pmx_core2 {
......@@ -152,6 +251,10 @@ codec {
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
&i2c3 {
clock-frequency = <100000>;
};
&mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
......@@ -211,3 +314,39 @@ &vaux2 {
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
&mcbsp2 {
status = "okay";
};
/* Needed to power the DPI pins */
&vpll2 {
regulator-always-on;
};
&dss {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins>;
port {
dpi_out: endpoint {
remote-endpoint = <&tfp410_in>;
data-lines = <24>;
};
};
};
&venc {
status = "ok";
vdda-supply = <&vdac>;
port {
venc_out: endpoint {
remote-endpoint = <&tv_connector_in>;
ti,channels = <2>;
};
};
};
arch/arm/boot/dts/omap3-cm-t3517.dts 0 → 100644
View file @ 703cc5df
/*
* Support for CompuLab CM-T3517
*/
/dts-v1/;
#include "am3517.dtsi"
#include "omap3-cm-t3x.dtsi"
/ {
model = "CompuLab CM-T3517";
compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
vmmc: regulator-vmmc {
compatible = "regulator-fixed";
regulator-name = "vmmc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
wl12xx_vmmc2: wl12xx_vmmc2 {
compatible = "regulator-fixed";
regulator-name = "vw1271";
pinctrl-names = "default";
pinctrl-0 = <
&wl12xx_wkup_pins
&wl12xx_core_pins
>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 6 GPIO_ACTIVE_HIGH >; /* gpio6 */
startup-delay-us = <20000>;
enable-active-high;
};
wl12xx_vaux2: wl12xx_vaux2 {
compatible = "regulator-fixed";
regulator-name = "vwl1271_vaux2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
&omap3_pmx_wkup {
wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */
OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE4) /* sys_boot4.gpio_6 */
>;
};
};
&omap3_pmx_core {
phy1_reset_pins: pinmux_hsusb1_phy_reset_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE4) /* uart2_tx.gpio_146 */
>;
};
phy2_reset_pins: pinmux_hsusb2_phy_reset_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x217a, PIN_OUTPUT | MUX_MODE4) /* uart2_rx.gpio_147 */
>;
};
otg_drv_vbus: pinmux_otg_drv_vbus {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
wl12xx_core_pins: pinmux_wl12xx_core_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs5.gpio_56 */
OMAP3_CORE1_IOPAD(0x2176, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_rts.gpio_145 */
>;
};
usb_hub_pins: pinmux_usb_hub_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4) /* mcbsp4_clkx.gpio_152 - USB HUB RST */
>;
};
};
&hsusb1_phy {
pinctrl-names = "default";
pinctrl-0 = <&phy1_reset_pins>;
reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
};
&hsusb2_phy {
pinctrl-names = "default";
pinctrl-0 = <&phy2_reset_pins>;
reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
};
&davinci_emac {
status = "okay";
};
&davinci_mdio {
status = "okay";
};
&am35x_otg_hs {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&otg_drv_vbus>;
};
&mmc1 {
vmmc-supply = <&vmmc>;
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&wl12xx_vmmc2>;
vmmc_aux-supply = <&wl12xx_vaux2>;
non-removable;
bus-width = <4>;
cap-power-off-card;
};
arch/arm/boot/dts/omap3-cm-t3530.dts 0 → 100644
View file @ 703cc5df
/*
* Support for CompuLab CM-T3530
*/
/dts-v1/;
#include "omap34xx.dtsi"
#include "omap3-cm-t3x30.dtsi"
/ {
model = "CompuLab CM-T3530";
compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
/* Regulator to trigger the reset signal of the Wifi module */
mmc2_sdio_reset: regulator-mmc2-sdio-reset {
compatible = "regulator-fixed";
regulator-name = "regulator-mmc2-sdio-reset";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&omap3_pmx_core {
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */
OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */
OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
>;
};
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&mmc2_sdio_reset>;
non-removable;
bus-width = <4>;
cap-power-off-card;
};
arch/arm/boot/dts/omap3-cm-t3730.dts
View file @ 703cc5df
......@@ -32,57 +32,26 @@ wl12xx_vaux2: wl12xx_vaux2 {
};
&omap3_pmx_core {
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
smsc1_pins: pinmux_smsc1_pins {
pinctrl-single,pins = <
0x88 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
0x16a (PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
0xb2 (PIN_OUTPUT | MUX_MODE4) /* dss_data3.gpio_73 */
0x134 (PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 */
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* dss_data3.gpio_73 */
OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 */
>;
};
};
&mmc1 {
vmmc-supply = <&vmmc1>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
......@@ -92,13 +61,3 @@ &mmc2 {
bus-width = <4>;
cap-power-off-card;
};
&smsc1 {
pinctrl-names = "default";
pinctrl-0 = <&smsc1_pins>;
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
arch/arm/boot/dts/omap3-cm-t3x.dtsi 0 → 100644
View file @ 703cc5df
/*
* Common support for CompuLab CM-T3x CoMs
*/
/ {
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&green_led_pins>;
ledb {
label = "cm-t3x:green";
gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */
linux,default-trigger = "heartbeat";
};
};
/* HS USB Port 1 Power */
hsusb1_power: hsusb1_power_reg {
compatible = "regulator-fixed";
regulator-name = "hsusb1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <70000>;
};
/* HS USB Port 2 Power */
hsusb2_power: hsusb2_power_reg {
compatible = "regulator-fixed";
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <70000>;
};
/* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&hsusb1_power>;
};
/* HS USB Host PHY on PORT 2 */
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&hsusb2_power>;
};
};
&omap3_pmx_core {
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
green_led_pins: pinmux_green_led_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4) /* sys_clkout2.gpio_186 */
>;
};
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
bus-width = <4>;
};
&mmc3 {
status = "disabled";
};
&i2c1 {
clock-frequency = <400000>;
};
&i2c3 {
clock-frequency = <400000>;
};
&usbhshost {
port1-mode = "ehci-phy";
port2-mode = "ehci-phy";
};
&usbhsehci {
phys = <&hsusb1_phy &hsusb2_phy>;
};
arch/arm/boot/dts/omap3-cm-t3x30.dtsi
View file @ 703cc5df
/*
* Common support for CompuLab CM-T3530 and CM-T3730
* Common support for CompuLab CM-T3x30 CoMs
*/
/ {
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
#include "omap3-cm-t3x.dtsi"
/ {
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
};
};
leds {
compatible = "gpio-leds";
ledb {
label = "cm-t35:green";
gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */
linux,default-trigger = "heartbeat";
};
};
vddvario: regulator-vddvario {
compatible = "regulator-fixed";
regulator-name = "vddvario";
......@@ -36,11 +24,40 @@ vdd33a: regulator-vdd33a {
};
};
&omap3_pmx_core {
smsc1_pins: pinmux_smsc1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
>;
};
hsusb0_pins: pinmux_hsusb0_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
OMAP3_CORE1_IOPAD(0x21a4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */
OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */
OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */
OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */
OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
>;
};
};
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>;
smsc1: ethernet@5,0 {
compatible = "smsc,lan9221", "smsc,lan9115";
pinctrl-names = "default";
pinctrl-0 = <&smsc1_pins>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
reg = <5 0 0xff>;
......@@ -74,8 +91,6 @@ smsc1: ethernet@5,0 {
};
&i2c1 {
clock-frequency = <400000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
......@@ -86,10 +101,31 @@ twl: twl@48 {
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
&i2c3 {
clock-frequency = <400000>;
&mmc1 {
vmmc-supply = <&vmmc1>;
};
&twl_gpio {
ti,use-leds;
/* pullups: BIT(0) */
ti,pullups = <0x000001>;
};
&hsusb1_phy {
reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
};
&hsusb2_phy {
reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
};
&usb_otg_hs {
pinctrl-names = "default";
pinctrl-0 = <&hsusb0_pins>;
interface-type = <0>;
usb-phy = <&usb2_phy>;
phys = <&usb2_phy>;
phy-names = "usb2-phy";
mode = <3>;
power = <50>;
};
arch/arm/boot/dts/omap3-devkit8000.dts
View file @ 703cc5df
......@@ -101,20 +101,8 @@ &wdt2 {
status = "disabled";
};
&mcbsp1 {
status = "disabled";
};
&mcbsp3 {
status = "disabled";
};
&mcbsp4 {
status = "disabled";
};
&mcbsp5 {
status = "disabled";
&mcbsp2 {
status = "okay";
};
&gpmc {
......
arch/arm/boot/dts/omap3-gta04.dts
View file @ 703cc5df
......@@ -36,6 +36,14 @@ aux-button {
gpio-key,wakeup;
};
};
sound {
compatible = "ti,omap-twl4030";
ti,model = "gta04";
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
};
&omap3_pmx_core {
......@@ -80,6 +88,12 @@ twl: twl@48 {
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
};
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
};
};
};
#include "twl4030.dtsi"
......@@ -96,6 +110,14 @@ bmp085@77 {
interrupts = <17 IRQ_TYPE_EDGE_RISING>;
};
/* accelerometer */
bma180@41 {
compatible = "bosch,bma180";
reg = <0x41>;
interrupt-parent = <&gpio3>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
};
/* leds */
tca6507@45 {
compatible = "ti,tca6507";
......@@ -124,6 +146,22 @@ gta04_led4: green_power@4 {
reg = <0x4>;
};
};
/* compass aka magnetometer */
hmc5843@1e {
compatible = "honeywell,hmc5843";
reg = <0x1e>;
};
/* touchscreen */
tsc2007@48 {
compatible = "ti,tsc2007";
reg = <0x48>;
interrupt-parent = <&gpio6>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = <600>;
};
};
&i2c3 {
......@@ -148,7 +186,9 @@ &mmc1 {
};
&mmc2 {
status = "disabled";
vmmc-supply = <&vaux4>;
bus-width = <4>;
ti,non-removable;
};
&mmc3 {
......@@ -170,3 +210,12 @@ &uart3 {
pinctrl-0 = <&uart3_pins>;
};
&charger {
bb_uvolt = <3200000>;
bb_uamp = <150>;
};
&vaux4 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
};
arch/arm/boot/dts/omap3-igep.dtsi
View file @ 703cc5df
......@@ -170,6 +170,7 @@ &i2c3 {
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
status = "okay";
};
&mmc1 {
......
arch/arm/boot/dts/omap3-igep0020.dts
View file @ 703cc5df
......@@ -61,22 +61,63 @@ hsusb1_phy: hsusb1_phy {
reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
vcc-supply = <&hsusb1_power>;
};
tfp410: encoder@0 {
compatible = "ti,tfp410";
powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tfp410_in: endpoint@0 {
remote-endpoint = <&dpi_out>;
};
};
port@1 {
reg = <1>;
tfp410_out: endpoint@0 {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
dvi0: connector@0 {
compatible = "dvi-connector";
label = "dvi";
digital;
ddc-i2c-bus = <&i2c3>;
port {
dvi_connector_in: endpoint {
remote-endpoint = <&tfp410_out>;
};
};
};
};
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
&tfp410_pins
&dss_pins
&dss_dpi_pins
>;
tfp410_pins: tfp410_dvi_pins {
tfp410_pins: pinmux_tfp410_pins {
pinctrl-single,pins = <
0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
>;
};
dss_pins: pinmux_dss_dvi_pins {
dss_dpi_pins: pinmux_dss_dpi_pins {
pinctrl-single,pins = <
0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
......@@ -226,3 +267,14 @@ &vpll2 {
/* Needed for DSS */
regulator-name = "vdds_dsi";
};
&dss {
status = "ok";
port {
dpi_out: endpoint {
remote-endpoint = <&tfp410_in>;
data-lines = <24>;
};
};
};
arch/arm/boot/dts/omap3-lilly-a83x.dtsi 0 → 100644
View file @ 703cc5df
/*
* Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "omap36xx.dtsi"
/ {
model = "INCOstartec LILLY-A83X module (DM3730)";
compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
chosen {
bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
};
memory {
device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128 MB */
};
leds {
compatible = "gpio-leds";
led1 {
label = "lilly-a83x::led1";
gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
};
sound {
compatible = "ti,omap-twl4030";
ti,model = "lilly-a83x";
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
reg_vcc3: vcc3 {
compatible = "regulator-fixed";
regulator-name = "VCC3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_vcc3>;
};
};
&omap3_pmx_wkup {
pinctrl-names = "default";
lan9221_pins: pinmux_lan9221_pins {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
>;
};
tsc2048_pins: pinmux_tsc2048_pins {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot6.gpio_8 */
>;
};
mmc1cd_pins: pinmux_mmc1cd_pins {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 */
>;
};
};
&omap3_pmx_core {
pinctrl-names = "default";
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clkx.uart2_tx */
OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */
OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
>;
};
hsusb1_pins: pinmux_hsusb1_pins {
pinctrl-single,pins = <
/* GPIO 182 controls USB-Hub reset. But USB-Phy its
* reset can't be controlled. So we clamp this GPIO to
* high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
*/
OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
>;
};
hsusb_otg_pins: pinmux_hsusb_otg_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
spi2_pins: pinmux_spi2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_clk.mcspi2_clk */
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_simo.mcspi2_simo */
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_somi.mcspi2_somi */
OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0.mcspi2_cs0 */
>;
};
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <
&hsusb1_2_pins
>;
hsusb1_2_pins: pinmux_hsusb1_2_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */
OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */
OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */
OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */
OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */
OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */
OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */
OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */
OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */
>;
};
gpio1_pins: pinmux_gpio1_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d15.gpio_29 */
>;
};
};
&gpio1 {
pinctrl-names = "default";
pinctrl-0 = <&gpio1_pins>;
};
&gpio6 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_pins>;
};
&i2c1 {
clock-frequency = <2600000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
};
};
};
};
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
&twl {
vmmc1: regulator-vmmc1 {
regulator-always-on;
};
vdd1: regulator-vdd1 {
regulator-always-on;
};
vdd2: regulator-vdd2 {
regulator-always-on;
};
};
&i2c2 {
clock-frequency = <2600000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
};
&i2c3 {
clock-frequency = <2600000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
gpiom1: gpio@20 {
compatible = "mcp,mcp23017";
gpio-controller;
#gpio-cells = <2>;
reg = <0x20>;
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&uart4 {
status = "disabled";
};
&mmc1 {
cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
cd-inverted;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
cap-sdio-irq;
cap-sd-highspeed;
cap-mmc-highspeed;
};
&mmc2 {
status = "disabled";
};
&mmc3 {
status = "disabled";
};
&mcspi2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins>;
tsc2046@0 {
reg = <0>; /* CS0 */
compatible = "ti,tsc2046";
interrupt-parent = <&gpio1>;
interrupts = <8 0>; /* boot6 / gpio_8 */
spi-max-frequency = <1000000>;
pendown-gpio = <&gpio1 8 0>;
vcc-supply = <&reg_vcc3>;
pinctrl-names = "default";
pinctrl-0 = <&tsc2048_pins>;
ti,x-min = <300>;
ti,x-max = <3000>;
ti,y-min = <600>;
ti,y-max = <3600>;
ti,x-plate-ohms = <80>;
ti,pressure-max = <255>;
ti,swap-xy;
linux,wakeup;
};
};
&usbhsehci {
phys = <&hsusb1_phy>;
};
&usbhshost {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_2_pins>;
num-ports = <2>;
port1-mode = "ehci-phy";
};
&usb_otg_hs {
pinctrl-names = "default";
pinctrl-0 = <&hsusb_otg_pins>;
interface-type = <0>;
usb-phy = <&usb2_phy>;
phys = <&usb2_phy>;
phy-names = "usb2-phy";
mode = <3>;
power = <50>;
};
&gpmc {
ranges = <0 0 0x30000000 0x1000000>,
<7 0 0x15000000 0x01000000>;
nand@0,0 {
reg = <0 0 0x1000000>;
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
/* no elm on omap3 */
gpmc,mux-add-data = <0>;
gpmc,device-nand;
gpmc,device-width = <2>;
gpmc,wait-pin = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,burst-length= <4>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <100>;
gpmc,cs-wr-off-ns = <100>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <100>;
gpmc,adv-wr-off-ns = <100>;
gpmc,oe-on-ns = <5>;
gpmc,oe-off-ns = <75>;
gpmc,we-on-ns = <5>;
gpmc,we-off-ns = <75>;
gpmc,rd-cycle-ns = <100>;
gpmc,wr-cycle-ns = <100>;
gpmc,access-ns = <60>;
gpmc,page-burst-access-ns = <5>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-delay-ns = <50>;
gpmc,wr-data-mux-bus-ns = <75>;
gpmc,wr-access-ns = <155>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "MLO";
reg = <0 0x80000>;
};
partition@0x80000 {
label = "u-boot";
reg = <0x80000 0x1e0000>;
};
partition@0x260000 {
label = "u-boot-environment";
reg = <0x260000 0x20000>;
};
partition@0x280000 {
label = "kernel";
reg = <0x280000 0x500000>;
};
partition@0x780000 {
label = "filesystem";
reg = <0x780000 0xf880000>;
};
};
ethernet@7,0 {
compatible = "smsc,lan9221", "smsc,lan9115";
bank-width = <2>;
gpmc,mux-add-data = <2>;
gpmc,cs-on-ns = <10>;
gpmc,cs-rd-off-ns = <60>;
gpmc,cs-wr-off-ns = <60>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <10>;
gpmc,adv-wr-off-ns = <10>;
gpmc,oe-on-ns = <10>;
gpmc,oe-off-ns = <60>;
gpmc,we-on-ns = <10>;
gpmc,we-off-ns = <60>;
gpmc,rd-cycle-ns = <100>;
gpmc,wr-cycle-ns = <100>;
gpmc,access-ns = <50>;
gpmc,page-burst-access-ns = <5>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <75>;
gpmc,wr-data-mux-bus-ns = <15>;
gpmc,wr-access-ns = <75>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
vddvario-supply = <&reg_vcc3>;
vdd33a-supply = <&reg_vcc3>;
reg-io-width = <4>;
interrupt-parent = <&gpio5>;
interrupts = <1 0x2>;
reg = <7 0 0xff>;
pinctrl-names = "default";
pinctrl-0 = <&lan9221_pins>;
phy-mode = "mii";
};
};
arch/arm/boot/dts/omap3-lilly-dbb056.dts 0 → 100644
View file @ 703cc5df
/*
* Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/dts-v1/;
#include "omap3-lilly-a83x.dtsi"
/ {
model = "INCOstartec LILLY-DBB056 (DM3730)";
compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
};
&twl {
vaux2: regulator-vaux2 {
compatible = "ti,twl4030-vaux2";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
};
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <&lcd_pins>;
lan9117_pins: pinmux_lan9117_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* cam_fld.gpio_98 */
>;
};
gpio4_pins: pinmux_gpio4_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* cam_xclkb.gpio_111 -> sja1000 IRQ */
>;
};
gpio5_pins: pinmux_gpio5_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x218c, PIN_OUTPUT | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcbsp1_clk.gpio_156 -> enable DSS */
>;
};
lcd_pins: pinmux_lcd_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */
OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */
OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 -> wp */
OMAP3_CORE1_IOPAD(0x219c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_rts_sd.gpio_164 -> cd */
>;
};
spi1_pins: pinmux_spi1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
>;
};
};
&gpio4 {
pinctrl-names = "default";
pinctrl-0 = <&gpio4_pins>;
};
&gpio5 {
pinctrl-names = "default";
pinctrl-0 = <&gpio5_pins>;
};
&mmc2 {
status = "okay";
bus-width = <4>;
vmmc-supply = <&vmmc1>;
cd-gpios = <&gpio6 4 0>; /* gpio_164 */
wp-gpios = <&gpio6 3 0>; /* gpio_163 */
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
ti,dual-volt;
};
&mcspi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
};
&gpmc {
ranges = <0 0 0x30000000 0x1000000>, /* nand assigned by COM a83x */
<4 0 0x20000000 0x01000000>,
<7 0 0x15000000 0x01000000>; /* eth assigend by COM a83x */
ethernet@4,0 {
compatible = "smsc,lan9117", "smsc,lan9115";
bank-width = <2>;
gpmc,mux-add-data = <2>;
gpmc,cs-on-ns = <10>;
gpmc,cs-rd-off-ns = <65>;
gpmc,cs-wr-off-ns = <65>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <10>;
gpmc,adv-wr-off-ns = <10>;
gpmc,oe-on-ns = <10>;
gpmc,oe-off-ns = <65>;
gpmc,we-on-ns = <10>;
gpmc,we-off-ns = <65>;
gpmc,rd-cycle-ns = <100>;
gpmc,wr-cycle-ns = <100>;
gpmc,access-ns = <60>;
gpmc,page-burst-access-ns = <5>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <75>;
gpmc,wr-data-mux-bus-ns = <15>;
gpmc,wr-access-ns = <75>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
vddvario-supply = <&reg_vcc3>;
vdd33a-supply = <&reg_vcc3>;
reg-io-width = <4>;
interrupt-parent = <&gpio4>;
interrupts = <2 0x2>;
reg = <4 0 0xff>;
pinctrl-names = "default";
pinctrl-0 = <&lan9117_pins>;
phy-mode = "mii";
smsc,force-internal-phy;
};
};
arch/arm/boot/dts/omap3-n900.dts
View file @ 703cc5df
......@@ -74,6 +74,22 @@ proximity_sensor {
};
};
isp1704: isp1704 {
compatible = "nxp,isp1704";
nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
usb-phy = <&usb2_phy>;
};
tv: connector {
compatible = "composite-connector";
label = "tv";
port {
tv_connector_in: endpoint {
remote-endpoint = <&venc_out>;
};
};
};
};
&omap3_pmx_core {
......@@ -140,11 +156,23 @@ mmc2_pins: pinmux_mmc2_pins {
>;
};
display_pins: pinmux_display_pins {
acx565akm_pins: pinmux_acx565akm_pins {
pinctrl-single,pins = <
0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
>;
};
dss_sdi_pins: pinmux_dss_sdi_pins {
pinctrl-single,pins = <
0x0c0 (PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */
0x0c2 (PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */
0x0c4 (PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */
0x0c6 (PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */
0x0d8 (PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */
0x0da (PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */
>;
};
};
&i2c1 {
......@@ -254,6 +282,61 @@ twl_audio: audio {
};
};
&twl_keypad {
linux,keymap = < 0x00000010 /* KEY_Q */
0x00010018 /* KEY_O */
0x00020019 /* KEY_P */
0x00030033 /* KEY_COMMA */
0x0004000e /* KEY_BACKSPACE */
0x0006001e /* KEY_A */
0x0007001f /* KEY_S */
0x01000011 /* KEY_W */
0x01010020 /* KEY_D */
0x01020021 /* KEY_F */
0x01030022 /* KEY_G */
0x01040023 /* KEY_H */
0x01050024 /* KEY_J */
0x01060025 /* KEY_K */
0x01070026 /* KEY_L */
0x02000012 /* KEY_E */
0x02010034 /* KEY_DOT */
0x02020067 /* KEY_UP */
0x0203001c /* KEY_ENTER */
0x0205002c /* KEY_Z */
0x0206002d /* KEY_X */
0x0207002e /* KEY_C */
0x02080043 /* KEY_F9 */
0x03000013 /* KEY_R */
0x0301002f /* KEY_V */
0x03020030 /* KEY_B */
0x03030031 /* KEY_N */
0x03040032 /* KEY_M */
0x03050039 /* KEY_SPACE */
0x03060039 /* KEY_SPACE */
0x03070069 /* KEY_LEFT */
0x04000014 /* KEY_T */
0x0401006c /* KEY_DOWN */
0x0402006a /* KEY_RIGHT */
0x0404001d /* KEY_LEFTCTRL */
0x04050064 /* KEY_RIGHTALT */
0x0406002a /* KEY_LEFTSHIFT */
0x04080044 /* KEY_F10 */
0x05000015 /* KEY_Y */
0x05080057 /* KEY_F11 */
0x06000016 /* KEY_U */
0x07000017 /* KEY_I */
0x07010041 /* KEY_F7 */
0x07020042 /* KEY_F8 */
>;
};
&twl_gpio {
ti,pullups = <0x0>;
ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
......@@ -291,6 +374,13 @@ tlv320aic3x_aux: tlv320aic3x@19 {
DVDD-supply = <&vio>;
};
tsl2563: tsl2563@29 {
compatible = "amstaos,tsl2563";
reg = <0x29>;
amstaos,cover-comp-gain = <16>;
};
lp5523: lp5523@32 {
compatible = "national,lp5523";
reg = <0x32>;
......@@ -356,6 +446,29 @@ bq27200: bq27200@55 {
compatible = "ti,bq27200";
reg = <0x55>;
};
tpa6130a2: tpa6130a2@60 {
compatible = "ti,tpa6130a2";
reg = <0x60>;
Vdd-supply = <&vmmc2>;
power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
};
bq24150a: bq24150a@6b {
compatible = "ti,bq24150a";
reg = <0x6b>;
ti,current-limit = <100>;
ti,weak-battery-voltage = <3400>;
ti,battery-regulation-voltage = <4200>;
ti,charge-current = <650>;
ti,termination-current = <100>;
ti,resistor-sense = <68>;
ti,usb-charger-detection = <&isp1704>;
};
};
&i2c3 {
......@@ -471,13 +584,23 @@ tsc2005@0 {
spi-max-frequency = <6000000>;
reg = <0>;
};
mipid@2 {
compatible = "acx565akm";
acx565akm@2 {
compatible = "sony,acx565akm";
spi-max-frequency = <6000000>;
reg = <2>;
pinctrl-names = "default";
pinctrl-0 = <&display_pins>;
pinctrl-0 = <&acx565akm_pins>;
label = "lcd";
reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
port {
lcd_in: endpoint {
remote-endpoint = <&sdi_out>;
};
};
};
};
......@@ -503,3 +626,39 @@ &uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&dss {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&dss_sdi_pins>;
vdds_sdi-supply = <&vaux1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
sdi_out: endpoint {
remote-endpoint = <&lcd_in>;
datapairs = <2>;
};
};
};
};
&venc {
status = "ok";
vdda-supply = <&vdac>;
port {
venc_out: endpoint {
remote-endpoint = <&tv_connector_in>;
ti,channels = <1>;
};
};
};
arch/arm/boot/dts/omap3-overo.dtsi
View file @ 703cc5df
......@@ -92,3 +92,7 @@ &uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&mcbsp2 {
status = "okay";
};
arch/arm/boot/dts/omap3-sb-t35.dtsi
View file @ 703cc5df
......@@ -2,11 +2,36 @@
* Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
*/
/ {
vddvario_sb_t35: regulator-vddvario-sb-t35 {
compatible = "regulator-fixed";
regulator-name = "vddvario";
regulator-always-on;
};
vdd33a_sb_t35: regulator-vdd33a-sb-t35 {
compatible = "regulator-fixed";
regulator-name = "vdd33a";
regulator-always-on;
};
};
&omap3_pmx_core {
smsc2_pins: pinmux_smsc2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs4.gpmc_ncs4 */
OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
>;
};
};
&gpmc {
ranges = <4 0 0x2d000000 0x01000000>;
smsc2: ethernet@4,0 {
compatible = "smsc,lan9221", "smsc,lan9115";
pinctrl-names = "default";
pinctrl-0 = <&smsc2_pins>;
interrupt-parent = <&gpio3>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
reg = <4 0 0xff>;
......@@ -32,8 +57,8 @@ smsc2: ethernet@4,0 {
gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
vddvario-supply = <&vddvario>;
vdd33a-supply = <&vdd33a>;
vddvario-supply = <&vddvario_sb_t35>;
vdd33a-supply = <&vdd33a_sb_t35>;
reg-io-width = <4>;
smsc,save-mac-address;
};
......
arch/arm/boot/dts/omap3-sbc-t3517.dts 0 → 100644
View file @ 703cc5df
/*
* Suppport for CompuLab SBC-T3517 with CM-T3517
*/
#include "omap3-cm-t3517.dts"
#include "omap3-sb-t35.dtsi"
/ {
model = "CompuLab SBC-T3517 with CM-T3517";
compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
};
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
&sb_t35_usb_hub_pins
&usb_hub_pins
>;
mmc1_aux_pins: pinmux_mmc1_aux_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59 */
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
>;
};
sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
>;
};
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <
&mmc1_pins
&mmc1_aux_pins
>;
wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */
cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
};
arch/arm/boot/dts/omap3-sbc-t3530.dts 0 → 100644
View file @ 703cc5df
/*
* Suppport for CompuLab SBC-T3530 with CM-T3530
*/
#include "omap3-cm-t3530.dts"
#include "omap3-sb-t35.dtsi"
/ {
model = "CompuLab SBC-T3530 with CM-T3530";
compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
};
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <&sb_t35_usb_hub_pins>;
sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
>;
};
};
/*
* The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and
* SB-T35 baseboard respectively.
* This setting includes both chips in SBC-T3530 board device tree.
*/
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>,
<4 0 0x2d000000 0x01000000>;
};
&mmc1 {
cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
};
arch/arm/boot/dts/omap3-sbc-t3730.dts
View file @ 703cc5df
......@@ -10,21 +10,18 @@ / {
compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
};
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>,
<4 0 0x2d000000 0x01000000>;
};
&smsc2 {
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <&smsc2_pins>;
};
pinctrl-0 = <&sb_t35_usb_hub_pins>;
&omap3_pmx_core {
smsc2_pins: pinmux_smsc2_pins {
sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
pinctrl-single,pins = <
0x86 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs4.gpmc_ncs4 */
0xa2 (PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
>;
};
};
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>,
<4 0 0x2d000000 0x01000000>;
};
arch/arm/boot/dts/omap3.dtsi
View file @ 703cc5df
......@@ -35,6 +35,11 @@ cpu@0 {
compatible = "arm,cortex-a8";
device_type = "cpu";
reg = <0x0>;
clocks = <&dpll1_ck>;
clock-names = "cpu";
clock-latency = <300000>; /* From omap-cpufreq driver */
};
};
......@@ -411,10 +416,19 @@ mmc3: mmc@480ad000 {
};
mmu_isp: mmu@480bd400 {
compatible = "ti,omap3-mmu-isp";
ti,hwmods = "mmu_isp";
compatible = "ti,omap2-iommu";
reg = <0x480bd400 0x80>;
interrupts = <8>;
interrupts = <24>;
ti,hwmods = "mmu_isp";
ti,#tlb-entries = <8>;
};
mmu_iva: mmu@5d000000 {
compatible = "ti,omap2-iommu";
reg = <0x5d000000 0x80>;
interrupts = <28>;
ti,hwmods = "mmu_iva";
status = "disabled";
};
wdt2: wdt@48314000 {
......@@ -436,6 +450,7 @@ mcbsp1: mcbsp@48074000 {
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp2: mcbsp@49022000 {
......@@ -453,6 +468,7 @@ mcbsp2: mcbsp@49022000 {
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp3: mcbsp@49024000 {
......@@ -470,6 +486,7 @@ mcbsp3: mcbsp@49024000 {
dmas = <&sdma 17>,
<&sdma 18>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp4: mcbsp@49026000 {
......@@ -485,6 +502,7 @@ mcbsp4: mcbsp@49026000 {
dmas = <&sdma 19>,
<&sdma 20>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp5: mcbsp@48096000 {
......@@ -500,6 +518,7 @@ mcbsp5: mcbsp@48096000 {
dmas = <&sdma 21>,
<&sdma 22>;
dma-names = "tx", "rx";
status = "disabled";
};
sham: sham@480c3000 {
......@@ -634,14 +653,14 @@ usbhshost: usbhshost@48064000 {
ranges;
usbhsohci: ohci@48064400 {
compatible = "ti,ohci-omap3", "usb-ohci";
compatible = "ti,ohci-omap3";
reg = <0x48064400 0x400>;
interrupt-parent = <&intc>;
interrupts = <76>;
};
usbhsehci: ehci@48064800 {
compatible = "ti,ehci-omap", "usb-ehci";
compatible = "ti,ehci-omap";
reg = <0x48064800 0x400>;
interrupt-parent = <&intc>;
interrupts = <77>;
......@@ -669,6 +688,58 @@ usb_otg_hs: usb_otg_hs@480ab000 {
num-eps = <16>;
ram-bits = <12>;
};
dss: dss@48050000 {
compatible = "ti,omap3-dss";
reg = <0x48050000 0x200>;
status = "disabled";
ti,hwmods = "dss_core";
clocks = <&dss1_alwon_fck>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges;
dispc@48050400 {
compatible = "ti,omap3-dispc";
reg = <0x48050400 0x400>;
interrupts = <25>;
ti,hwmods = "dss_dispc";
clocks = <&dss1_alwon_fck>;
clock-names = "fck";
};
dsi: encoder@4804fc00 {
compatible = "ti,omap3-dsi";
reg = <0x4804fc00 0x200>,
<0x4804fe00 0x40>,
<0x4804ff00 0x20>;
reg-names = "proto", "phy", "pll";
interrupts = <25>;
status = "disabled";
ti,hwmods = "dss_dsi1";
clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
clock-names = "fck", "sys_clk";
};
rfbi: encoder@48050800 {
compatible = "ti,omap3-rfbi";
reg = <0x48050800 0x100>;
status = "disabled";
ti,hwmods = "dss_rfbi";
clocks = <&dss1_alwon_fck>, <&dss_ick>;
clock-names = "fck", "ick";
};
venc: encoder@48050c00 {
compatible = "ti,omap3-venc";
reg = <0x48050c00 0x100>;
status = "disabled";
ti,hwmods = "dss_venc";
clocks = <&dss_tv_fck>;
clock-names = "fck";
};
};
};
};
......
arch/arm/boot/dts/omap3430-sdp.dts
View file @ 703cc5df
......@@ -34,6 +34,10 @@ twl: twl@48 {
&mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
/*
* S6-3 must be in ON position for 8 bit mode to function
* Else, use 4 bit mode
*/
bus-width = <8>;
};
......@@ -103,9 +107,8 @@ nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <1 0 0x08000000>;
ti,nand-ecc-opt = "ham1";
nand-bus-width = <8>;
ti,nand-ecc-opt = "sw";
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <36>;
gpmc,cs-wr-off-ns = <36>;
......
arch/arm/boot/dts/omap3430es1-clocks.dtsi
View file @ 703cc5df
......@@ -82,16 +82,16 @@ ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1 {
ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
};
ssi_ssr_fck_3430es1: ssi_ssr_fck_3430es1 {
ssi_ssr_fck: ssi_ssr_fck_3430es1 {
#clock-cells = <0>;
compatible = "ti,composite-clock";
clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>;
};
ssi_sst_fck_3430es1: ssi_sst_fck_3430es1 {
ssi_sst_fck: ssi_sst_fck_3430es1 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&ssi_ssr_fck_3430es1>;
clocks = <&ssi_ssr_fck>;
clock-mult = <1>;
clock-div = <2>;
};
......@@ -120,7 +120,7 @@ ssi_l4_ick: ssi_l4_ick {
clock-div = <1>;
};
ssi_ick_3430es1: ssi_ick_3430es1 {
ssi_ick: ssi_ick_3430es1 {
#clock-cells = <0>;
compatible = "ti,omap3-no-wait-interface-clock";
clocks = <&ssi_l4_ick>;
......@@ -152,7 +152,7 @@ usb_l4_ick: usb_l4_ick {
clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
};
dss1_alwon_fck_3430es1: dss1_alwon_fck_3430es1 {
dss1_alwon_fck: dss1_alwon_fck_3430es1 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll4_m4x2_ck>;
......@@ -161,7 +161,7 @@ dss1_alwon_fck_3430es1: dss1_alwon_fck_3430es1 {
ti,set-rate-parent;
};
dss_ick_3430es1: dss_ick_3430es1 {
dss_ick: dss_ick_3430es1 {
#clock-cells = <0>;
compatible = "ti,omap3-no-wait-interface-clock";
clocks = <&l4_ick>;
......@@ -184,7 +184,7 @@ gfx_3430es1_clkdm: gfx_3430es1_clkdm {
dss_clkdm: dss_clkdm {
compatible = "ti,clockdomain";
clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
<&dss1_alwon_fck_3430es1>, <&dss_ick_3430es1>;
<&dss1_alwon_fck>, <&dss_ick>;
};
d2d_clkdm: d2d_clkdm {
......@@ -203,6 +203,6 @@ core_l4_clkdm: core_l4_clkdm {
<&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
<&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
<&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
<&fshostusb_fck>, <&fac_ick>, <&ssi_ick_3430es1>;
<&fshostusb_fck>, <&fac_ick>, <&ssi_ick>;
};
};
arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
View file @ 703cc5df
......@@ -160,7 +160,7 @@ mmchs3_fck: mmchs3_fck {
ti,bit-shift = <30>;
};
dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2 {
dss1_alwon_fck: dss1_alwon_fck_3430es2 {
#clock-cells = <0>;
compatible = "ti,dss-gate-clock";
clocks = <&dpll4_m4x2_ck>;
......@@ -169,7 +169,7 @@ dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2 {
ti,set-rate-parent;
};
dss_ick_3430es2: dss_ick_3430es2 {
dss_ick: dss_ick_3430es2 {
#clock-cells = <0>;
compatible = "ti,omap3-dss-interface-clock";
clocks = <&l4_ick>;
......@@ -216,7 +216,7 @@ sgx_clkdm: sgx_clkdm {
dss_clkdm: dss_clkdm {
compatible = "ti,clockdomain";
clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
<&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
<&dss1_alwon_fck>, <&dss_ick>;
};
core_l4_clkdm: core_l4_clkdm {
......
arch/arm/boot/dts/omap36xx-clocks.dtsi
View file @ 703cc5df
......@@ -70,6 +70,26 @@ uart4_fck: uart4_fck {
};
};
&dpll4_m2x2_mul_ck {
clock-mult = <1>;
};
&dpll4_m3x2_mul_ck {
clock-mult = <1>;
};
&dpll4_m4x2_mul_ck {
ti,clock-mult = <1>;
};
&dpll4_m5x2_mul_ck {
clock-mult = <1>;
};
&dpll4_m6x2_mul_ck {
clock-mult = <1>;
};
&cm_clockdomains {
dpll4_clkdm: dpll4_clkdm {
compatible = "ti,clockdomain";
......
arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
View file @ 703cc5df
......@@ -25,16 +25,16 @@ ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
};
ssi_ssr_fck_3430es2: ssi_ssr_fck_3430es2 {
ssi_ssr_fck: ssi_ssr_fck_3430es2 {
#clock-cells = <0>;
compatible = "ti,composite-clock";
clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
};
ssi_sst_fck_3430es2: ssi_sst_fck_3430es2 {
ssi_sst_fck: ssi_sst_fck_3430es2 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&ssi_ssr_fck_3430es2>;
clocks = <&ssi_ssr_fck>;
clock-mult = <1>;
clock-div = <2>;
};
......@@ -55,7 +55,7 @@ ssi_l4_ick: ssi_l4_ick {
clock-div = <1>;
};
ssi_ick_3430es2: ssi_ick_3430es2 {
ssi_ick: ssi_ick_3430es2 {
#clock-cells = <0>;
compatible = "ti,omap3-ssi-interface-clock";
clocks = <&ssi_l4_ick>;
......@@ -193,6 +193,6 @@ core_l4_clkdm: core_l4_clkdm {
<&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
<&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
<&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
<&ssi_ick_3430es2>;
<&ssi_ick>;
};
};
arch/arm/boot/dts/omap36xx.dtsi
View file @ 703cc5df
......@@ -39,6 +39,26 @@ uart4: serial@49042000 {
clock-frequency = <48000000>;
};
abb_mpu_iva: regulator-abb-mpu {
compatible = "ti,abb-v1";
regulator-name = "abb_mpu_iva";
#address-cell = <0>;
#size-cells = <0>;
reg = <0x483072f0 0x8>, <0x48306818 0x4>;
reg-names = "base-address", "int-address";
ti,tranxdone-status-mask = <0x4000000>;
clocks = <&sys_ck>;
ti,settling-time = <30>;
ti,clock-cycles = <8>;
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1012500 0 0 0 0 0
1200000 0 0 0 0 0
1325000 0 0 0 0 0
1375000 1 0 0 0 0
>;
};
omap3_pmx_core2: pinmux@480025a0 {
compatible = "ti,omap3-padconf", "pinctrl-single";
reg = <0x480025a0 0x5c>;
......@@ -52,7 +72,13 @@ omap3_pmx_core2: pinmux@480025a0 {
};
};
/include/ "omap36xx-clocks.dtsi"
/* OMAP3630 needs dss_96m_fck for VENC */
&venc {
clocks = <&dss_tv_fck>, <&dss_96m_fck>;
clock-names = "fck", "tv_dac_clk";
};
/include/ "omap34xx-omap36xx-clocks.dtsi"
/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
/include/ "omap36xx-clocks.dtsi"
arch/arm/boot/dts/omap3xxx-clocks.dtsi
View file @ 703cc5df
......@@ -425,10 +425,11 @@ dpll4_m4_ck: dpll4_m4_ck {
dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
compatible = "ti,fixed-factor-clock";
clocks = <&dpll4_m4_ck>;
clock-mult = <2>;
clock-div = <1>;
ti,clock-mult = <2>;
ti,clock-div = <1>;
ti,set-rate-parent;
};
dpll4_m4x2_ck: dpll4_m4x2_ck {
......@@ -438,6 +439,7 @@ dpll4_m4x2_ck: dpll4_m4x2_ck {
ti,bit-shift = <0x1d>;
reg = <0x0d00>;
ti,set-bit-to-disable;
ti,set-rate-parent;
};
dpll4_m5_ck: dpll4_m5_ck {
......
arch/arm/boot/dts/omap4-duovero-parlor.dts 0 → 100644
View file @ 703cc5df
/*
* Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "omap4-duovero.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "OMAP4430 Gumstix Duovero on Parlor";
compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
leds {
compatible = "gpio-leds";
led0 {
label = "duovero:blue:led0";
gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio_122 */
linux,default-trigger = "heartbeat";
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button0@121 {
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */
gpio-key,wakeup;
};
};
};
&omap4_pmx_core {
pinctrl-0 = <
&led_pins
&button_pins
&smsc_pins
>;
led_pins: pinmux_led_pins {
pinctrl-single,pins = <
0xd6 (PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */
>;
};
button_pins: pinmux_button_pins {
pinctrl-single,pins = <
0xd4 (PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
smsc_pins: pinmux_smsc_pins {
pinctrl-single,pins = <
0x28 (PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */
0x2a (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */
0x30 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48: amdix enabled */
>;
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <100000>;
/* optional 1K EEPROM with revision information */
eeprom@51 {
compatible = "atmel,24c01";
reg = <0x51>;
pagesize = <8>;
};
};
&mmc3 {
status = "disabled";
};
#include "omap-gpmc-smsc911x.dtsi"
&gpmc {
ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
ethernet@gpmc {
reg = <5 0 0xff>;
interrupt-parent = <&gpio2>;
interrupts = <12 IRQ_TYPE_LEVEL_LOW>; /* gpio_44 */
phy-mode = "mii";
gpmc,cs-on-ns = <10>;
gpmc,cs-rd-off-ns = <50>;
gpmc,cs-wr-off-ns = <50>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <10>;
gpmc,adv-wr-off-ns = <10>;
gpmc,oe-on-ns = <15>;
gpmc,oe-off-ns = <50>;
gpmc,we-on-ns = <15>;
gpmc,we-off-ns = <50>;
gpmc,rd-cycle-ns = <50>;
gpmc,wr-cycle-ns = <50>;
gpmc,access-ns = <50>;
gpmc,page-burst-access-ns = <0>;
gpmc,bus-turnaround-ns = <35>;
gpmc,cycle2cycle-delay-ns = <35>;
gpmc,wr-data-mux-bus-ns = <35>;
gpmc,wr-access-ns = <50>;
gpmc,mux-add-data = <2>;
gpmc,sync-read;
gpmc,sync-write;
gpmc,clk-activation-ns = <5>;
gpmc,sync-clk-ps = <20000>;
};
};
arch/arm/boot/dts/omap4-duovero.dtsi 0 → 100644
View file @ 703cc5df
/*
* Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "omap443x.dtsi"
/ {
model = "Gumstix Duovero";
compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
sound {
compatible = "ti,abe-twl6040";
ti,model = "DuoVero";
ti,mclk-freq = <38400000>;
ti,mcpdm = <&mcpdm>;
ti,twl6040 = <&twl6040>;
/* Audio routing */
ti,audio-routing =
"Headset Stereophone", "HSOL",
"Headset Stereophone", "HSOR",
"HSMIC", "Headset Mic",
"Headset Mic", "Headset Mic Bias";
};
/* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
pinctrl-names = "default";
pinctrl-0 = <&hsusb1phy_pins>;
clocks = <&auxclk3_ck>;
clock-names = "main_clk";
clock-frequency = <19200000>;
};
/* regulator for w2cbw0015 on sdio5 */
w2cbw0015_vmmc: w2cbw0015_vmmc {
pinctrl-names = "default";
pinctrl-0 = <&w2cbw0015_pins>;
compatible = "regulator-fixed";
regulator-name = "w2cbw0015";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; /* gpio_43 */
startup-delay-us = <70000>;
enable-active-high;
regulator-boot-on;
};
};
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
&twl6040_pins
&mcpdm_pins
&mcbsp1_pins
&hsusbb1_pins
>;
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
0x126 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */
0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
>;
};
hsusbb1_pins: pinmux_hsusbb1_pins {
pinctrl-single,pins = <
0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
>;
};
hsusb1phy_pins: pinmux_hsusb1phy_pins {
pinctrl-single,pins = <
0x4c (PIN_OUTPUT | MUX_MODE3) /* gpmc_wait1.gpio_62 */
>;
};
w2cbw0015_pins: pinmux_w2cbw0015_pins {
pinctrl-single,pins = <
0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
0xa2 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
0xa4 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_cmd */
0xa6 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_dat0 */
0xa8 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
0xaa (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
0xac (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
>;
};
mmc5_pins: pinmux_mmc5_pins {
pinctrl-single,pins = <
0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1 */
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2 */
0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3 */
>;
};
};
/* PMIC */
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
enable-active-high;
};
};
#include "twl6030.dtsi"
#include "twl6030_omap4.dtsi"
/* on-board bluetooth / WiFi module */
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins>;
clock-frequency = <400000>;
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc>;
ti,bus-width = <4>;
ti,non-removable; /* FIXME: use PMIC_MMC detect */
};
&mmc2 {
status = "disabled";
};
/* mmc3 is available to the expansion board */
&mmc4 {
status = "disabled";
};
/* on-board WiFi module */
&mmc5 {
pinctrl-names = "default";
pinctrl-0 = <&mmc5_pins>;
vmmc-supply = <&w2cbw0015_vmmc>;
ti,bus-width = <4>;
ti,non-removable;
cap-power-off-card;
};
&twl_usb_comparator {
usb-supply = <&vusb>;
};
&usb_otg_hs {
interface-type = <1>;
mode = <3>;
power = <50>;
};
&usbhshost {
port1-mode = "ehci-phy";
};
&usbhsehci {
phys = <&hsusb1_phy>;
};
arch/arm/boot/dts/omap4-panda-common.dtsi
View file @ 703cc5df
......@@ -16,6 +16,11 @@ memory {
reg = <0x80000000 0x40000000>; /* 1 GB */
};
aliases {
display0 = &dvi0;
display1 = &hdmi0;
};
leds: leds {
compatible = "gpio-leds";
pinctrl-names = "default";
......@@ -83,12 +88,8 @@ hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
vcc-supply = <&hsusb1_power>;
/**
* FIXME:
* put the right clock phandle here when available
* clocks = <&auxclk3>;
* clock-names = "main_clk";
*/
clocks = <&auxclk3_ck>;
clock-names = "main_clk";
clock-frequency = <19200000>;
};
......@@ -104,14 +105,94 @@ wl12xx_vmmc: wl12xx_vmmc {
startup-delay-us = <70000>;
enable-active-high;
};
tfp410: encoder@0 {
compatible = "ti,tfp410";
powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tfp410_in: endpoint@0 {
remote-endpoint = <&dpi_out>;
};
};
port@1 {
reg = <1>;
tfp410_out: endpoint@0 {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
dvi0: connector@0 {
compatible = "dvi-connector";
label = "dvi";
digital;
ddc-i2c-bus = <&i2c3>;
port {
dvi_connector_in: endpoint {
remote-endpoint = <&tfp410_out>;
};
};
};
tpd12s015: encoder@1 {
compatible = "ti,tpd12s015";
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
<&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
<&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tpd12s015_in: endpoint@0 {
remote-endpoint = <&hdmi_out>;
};
};
port@1 {
reg = <1>;
tpd12s015_out: endpoint@0 {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
hdmi0: connector@1 {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&tpd12s015_out>;
};
};
};
};
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
&twl6040_pins
&mcpdm_pins
&mcbsp1_pins
&dss_dpi_pins
&tfp410_pins
&dss_hdmi_pins
......@@ -300,6 +381,10 @@ twl: twl@48 {
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&twl6040_pins>;
/* IRQ# = 119 */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
......@@ -380,16 +465,16 @@ &emif2 {
device-handle = <&elpida_ECB240ABACN>;
};
&mcbsp2 {
status = "disabled";
};
&mcbsp3 {
status = "disabled";
&mcbsp1 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp1_pins>;
status = "okay";
};
&dmic {
status = "disabled";
&mcpdm {
pinctrl-names = "default";
pinctrl-0 = <&mcpdm_pins>;
status = "okay";
};
&twl_usb_comparator {
......@@ -409,3 +494,30 @@ &usbhshost {
&usbhsehci {
phys = <&hsusb1_phy>;
};
&dss {
status = "ok";
port {
dpi_out: endpoint {
remote-endpoint = <&tfp410_in>;
data-lines = <24>;
};
};
};
&dsi2 {
status = "ok";
vdd-supply = <&vcxio>;
};
&hdmi {
status = "ok";
vdda-supply = <&vdac>;
port {
hdmi_out: endpoint {
remote-endpoint = <&tpd12s015_in>;
};
};
};
arch/arm/boot/dts/omap4-sdp.dts
View file @ 703cc5df
......@@ -19,6 +19,12 @@ memory {
reg = <0x80000000 0x40000000>; /* 1 GB */
};
aliases {
display0 = &lcd0;
display1 = &lcd1;
display2 = &hdmi0;
};
vdd_eth: fixedregulator-vdd-eth {
compatible = "regulator-fixed";
regulator-name = "VDD_ETH";
......@@ -153,16 +159,53 @@ wl12xx_vmmc: wl12xx_vmmc {
startup-delay-us = <70000>;
enable-active-high;
};
tpd12s015: encoder@0 {
compatible = "ti,tpd12s015";
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
<&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
<&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tpd12s015_in: endpoint@0 {
remote-endpoint = <&hdmi_out>;
};
};
port@1 {
reg = <1>;
tpd12s015_out: endpoint@0 {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
hdmi0: connector@0 {
compatible = "hdmi-connector";
label = "hdmi";
type = "c";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&tpd12s015_out>;
};
};
};
};
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
&twl6040_pins
&mcpdm_pins
&dmic_pins
&mcbsp1_pins
&mcbsp2_pins
&dss_hdmi_pins
&tpd12s015_pins
>;
......@@ -326,6 +369,10 @@ twl: twl@48 {
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&twl6040_pins>;
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
......@@ -537,8 +584,28 @@ &uart4 {
pinctrl-0 = <&uart4_pins>;
};
&mcbsp3 {
status = "disabled";
&mcbsp1 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp1_pins>;
status = "okay";
};
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
status = "okay";
};
&dmic {
pinctrl-names = "default";
pinctrl-0 = <&dmic_pins>;
status = "okay";
};
&mcpdm {
pinctrl-names = "default";
pinctrl-0 = <&mcpdm_pins>;
status = "okay";
};
&twl_usb_comparator {
......@@ -550,3 +617,68 @@ &usb_otg_hs {
mode = <3>;
power = <50>;
};
&dss {
status = "ok";
};
&dsi1 {
status = "ok";
vdd-supply = <&vcxio>;
port {
dsi1_out_ep: endpoint {
remote-endpoint = <&lcd0_in>;
lanes = <0 1 2 3 4 5>;
};
};
lcd0: display {
compatible = "tpo,taal", "panel-dsi-cm";
label = "lcd0";
reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
port {
lcd0_in: endpoint {
remote-endpoint = <&dsi1_out_ep>;
};
};
};
};
&dsi2 {
status = "ok";
vdd-supply = <&vcxio>;
port {
dsi2_out_ep: endpoint {
remote-endpoint = <&lcd1_in>;
lanes = <0 1 2 3 4 5>;
};
};
lcd1: display {
compatible = "tpo,taal", "panel-dsi-cm";
label = "lcd1";
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
port {
lcd1_in: endpoint {
remote-endpoint = <&dsi2_out_ep>;
};
};
};
};
&hdmi {
status = "ok";
vdda-supply = <&vdac>;
port {
hdmi_out: endpoint {
remote-endpoint = <&tpd12s015_in>;
};
};
};
arch/arm/boot/dts/omap4.dtsi
View file @ 703cc5df
......@@ -36,6 +36,11 @@ cpu@0 {
device_type = "cpu";
next-level-cache = <&L2>;
reg = <0x0>;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
clock-latency = <300000>; /* From omap-cpufreq driver */
};
cpu@1 {
compatible = "arm,cortex-a9";
......@@ -313,6 +318,7 @@ hwspinlock: spinlock@4a0f6000 {
compatible = "ti,omap4-hwspinlock";
reg = <0x4a0f6000 0x1000>;
ti,hwmods = "spinlock";
#hwlock-cells = <1>;
};
i2c1: i2c@48070000 {
......@@ -461,6 +467,21 @@ mmc5: mmc@480d5000 {
dma-names = "tx", "rx";
};
mmu_dsp: mmu@4a066000 {
compatible = "ti,omap4-iommu";
reg = <0x4a066000 0x100>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_dsp";
};
mmu_ipu: mmu@55082000 {
compatible = "ti,omap4-iommu";
reg = <0x55082000 0x100>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_ipu";
ti,iommu-bus-err-back;
};
wdt2: wdt@4a314000 {
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
reg = <0x4a314000 0x80>;
......@@ -478,6 +499,7 @@ mcpdm: mcpdm@40132000 {
dmas = <&sdma 65>,
<&sdma 66>;
dma-names = "up_link", "dn_link";
status = "disabled";
};
dmic: dmic@4012e000 {
......@@ -489,6 +511,7 @@ dmic: dmic@4012e000 {
ti,hwmods = "dmic";
dmas = <&sdma 67>;
dma-names = "up_link";
status = "disabled";
};
mcbsp1: mcbsp@40122000 {
......@@ -503,6 +526,7 @@ mcbsp1: mcbsp@40122000 {
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp2: mcbsp@40124000 {
......@@ -517,6 +541,7 @@ mcbsp2: mcbsp@40124000 {
dmas = <&sdma 17>,
<&sdma 18>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp3: mcbsp@40126000 {
......@@ -531,6 +556,7 @@ mcbsp3: mcbsp@40126000 {
dmas = <&sdma 19>,
<&sdma 20>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp4: mcbsp@48096000 {
......@@ -544,6 +570,7 @@ mcbsp4: mcbsp@48096000 {
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
status = "disabled";
};
keypad: keypad@4a31c000 {
......@@ -554,6 +581,13 @@ keypad: keypad@4a31c000 {
ti,hwmods = "kbd";
};
dmm@4e000000 {
compatible = "ti,omap4-dmm";
reg = <0x4e000000 0x800>;
interrupts = <0 113 0x4>;
ti,hwmods = "dmm";
};
emif1: emif@4c000000 {
compatible = "ti,emif-4d";
reg = <0x4c000000 0x100>;
......@@ -699,14 +733,14 @@ usbhshost: usbhshost@4a064000 {
ranges;
usbhsohci: ohci@4a064800 {
compatible = "ti,ohci-omap3", "usb-ohci";
compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
};
usbhsehci: ehci@4a064c00 {
compatible = "ti,ehci-omap", "usb-ehci";
compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
......@@ -757,6 +791,111 @@ des: des@480a5000 {
dmas = <&sdma 117>, <&sdma 116>;
dma-names = "tx", "rx";
};
abb_mpu: regulator-abb-mpu {
compatible = "ti,abb-v2";
regulator-name = "abb_mpu";
#address-cells = <0>;
#size-cells = <0>;
ti,tranxdone-status-mask = <0x80>;
clocks = <&sys_clkin_ck>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
status = "disabled";
};
abb_iva: regulator-abb-iva {
compatible = "ti,abb-v2";
regulator-name = "abb_iva";
#address-cells = <0>;
#size-cells = <0>;
ti,tranxdone-status-mask = <0x80000000>;
clocks = <&sys_clkin_ck>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
status = "disabled";
};
dss: dss@58000000 {
compatible = "ti,omap4-dss";
reg = <0x58000000 0x80>;
status = "disabled";
ti,hwmods = "dss_core";
clocks = <&dss_dss_clk>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges;
dispc@58001000 {
compatible = "ti,omap4-dispc";
reg = <0x58001000 0x1000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "dss_dispc";
clocks = <&dss_dss_clk>;
clock-names = "fck";
};
rfbi: encoder@58002000 {
compatible = "ti,omap4-rfbi";
reg = <0x58002000 0x1000>;
status = "disabled";
ti,hwmods = "dss_rfbi";
clocks = <&dss_dss_clk>, <&dss_fck>;
clock-names = "fck", "ick";
};
venc: encoder@58003000 {
compatible = "ti,omap4-venc";
reg = <0x58003000 0x1000>;
status = "disabled";
ti,hwmods = "dss_venc";
clocks = <&dss_tv_clk>;
clock-names = "fck";
};
dsi1: encoder@58004000 {
compatible = "ti,omap4-dsi";
reg = <0x58004000 0x200>,
<0x58004200 0x40>,
<0x58004300 0x20>;
reg-names = "proto", "phy", "pll";
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
ti,hwmods = "dss_dsi1";
clocks = <&dss_dss_clk>, <&dss_sys_clk>;
clock-names = "fck", "sys_clk";
};
dsi2: encoder@58005000 {
compatible = "ti,omap4-dsi";
reg = <0x58005000 0x200>,
<0x58005200 0x40>,
<0x58005300 0x20>;
reg-names = "proto", "phy", "pll";
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
ti,hwmods = "dss_dsi2";
clocks = <&dss_dss_clk>, <&dss_sys_clk>;
clock-names = "fck", "sys_clk";
};
hdmi: encoder@58006000 {
compatible = "ti,omap4-hdmi";
reg = <0x58006000 0x200>,
<0x58006200 0x100>,
<0x58006300 0x100>,
<0x58006400 0x1000>;
reg-names = "wp", "pll", "phy", "core";
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
ti,hwmods = "dss_hdmi";
clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
clock-names = "fck", "sys_clk";
};
};
};
};
......
arch/arm/boot/dts/omap443x.dtsi
View file @ 703cc5df
......@@ -43,6 +43,32 @@ bandgap: bandgap {
#thermal-sensor-cells = <0>;
};
};
ocp {
abb_mpu: regulator-abb-mpu {
status = "okay";
reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>;
reg-names = "base-address", "int-address";
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1025000 0 0 0 0 0
1200000 0 0 0 0 0
1313000 0 0 0 0 0
1375000 1 0 0 0 0
1389000 1 0 0 0 0
>;
};
/* Default unused, just provide register info for record */
abb_iva: regulator-abb-iva {
reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>;
reg-names = "base-address", "int-address";
};
};
};
/include/ "omap443x-clocks.dtsi"
arch/arm/boot/dts/omap4460.dtsi
View file @ 703cc5df
......@@ -50,7 +50,44 @@ bandgap: bandgap {
#thermal-sensor-cells = <0>;
};
abb_mpu: regulator-abb-mpu {
status = "okay";
reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
<0x4A002268 0x4>;
reg-names = "base-address", "int-address",
"efuse-address";
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1025000 0 0 0 0 0
1200000 0 0 0 0 0
1313000 0 0 0x100000 0x40000 0
1375000 1 0 0 0 0
1389000 1 0 0 0 0
>;
};
abb_iva: regulator-abb-iva {
status = "okay";
reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
<0x4A002268 0x4>;
reg-names = "base-address", "int-address",
"efuse-address";
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
950000 0 0 0 0 0
1140000 0 0 0 0 0
1291000 0 0 0x200000 0 0
1375000 1 0 0 0 0
1376000 1 0 0 0 0
>;
};
};
};
/include/ "omap446x-clocks.dtsi"
arch/arm/boot/dts/omap5-uevm.dts
View file @ 703cc5df
......@@ -31,12 +31,8 @@ vmmcsd_fixed: fixedregulator-mmcsd {
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
/**
* FIXME
* Put the right clock phandle here when available
* clocks = <&auxclk1>;
* clock-names = "main_clk";
*/
clocks = <&auxclk1_ck>;
clock-names = "main_clk";
clock-frequency = <19200000>;
};
......
arch/arm/boot/dts/omap5.dtsi
View file @ 703cc5df
......@@ -49,6 +49,12 @@ cpu0: cpu@0 {
1000000 1060000
1500000 1250000
>;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
clock-latency = <300000>; /* From omap-cpufreq driver */
/* cooling options */
cooling-min-level = <0>;
cooling-max-level = <2>;
......@@ -353,6 +359,7 @@ hwspinlock: spinlock@4a0f6000 {
compatible = "ti,omap4-hwspinlock";
reg = <0x4a0f6000 0x1000>;
ti,hwmods = "spinlock";
#hwlock-cells = <1>;
};
mcspi1: spi@48098000 {
......@@ -513,6 +520,21 @@ mmc5: mmc@480d5000 {
dma-names = "tx", "rx";
};
mmu_dsp: mmu@4a066000 {
compatible = "ti,omap4-iommu";
reg = <0x4a066000 0x100>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_dsp";
};
mmu_ipu: mmu@55082000 {
compatible = "ti,omap4-iommu";
reg = <0x55082000 0x100>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_ipu";
ti,iommu-bus-err-back;
};
keypad: keypad@4ae1c000 {
compatible = "ti,omap4-keypad";
reg = <0x4ae1c000 0x400>;
......@@ -529,6 +551,7 @@ mcpdm: mcpdm@40132000 {
dmas = <&sdma 65>,
<&sdma 66>;
dma-names = "up_link", "dn_link";
status = "disabled";
};
dmic: dmic@4012e000 {
......@@ -540,6 +563,7 @@ dmic: dmic@4012e000 {
ti,hwmods = "dmic";
dmas = <&sdma 67>;
dma-names = "up_link";
status = "disabled";
};
mcbsp1: mcbsp@40122000 {
......@@ -554,6 +578,7 @@ mcbsp1: mcbsp@40122000 {
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp2: mcbsp@40124000 {
......@@ -568,6 +593,7 @@ mcbsp2: mcbsp@40124000 {
dmas = <&sdma 17>,
<&sdma 18>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp3: mcbsp@40126000 {
......@@ -582,6 +608,7 @@ mcbsp3: mcbsp@40126000 {
dmas = <&sdma 19>,
<&sdma 20>;
dma-names = "tx", "rx";
status = "disabled";
};
timer1: timer@4ae18000 {
......@@ -683,6 +710,13 @@ wdt2: wdt@4ae14000 {
ti,hwmods = "wd_timer2";
};
dmm@4e000000 {
compatible = "ti,omap5-dmm";
reg = <0x4e000000 0x800>;
interrupts = <0 113 0x4>;
ti,hwmods = "dmm";
};
emif1: emif@4c000000 {
compatible = "ti,emif-4d5";
ti,hwmods = "emif1";
......@@ -732,7 +766,8 @@ dwc3@4a030000 {
compatible = "snps,dwc3";
reg = <0x4a030000 0x10000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
usb-phy = <&usb2_phy>, <&usb3_phy>;
phys = <&usb2_phy>, <&usb3_phy>;
phy-names = "usb2-phy", "usb3-phy";
dr_mode = "peripheral";
tx-fifo-resize;
};
......@@ -749,6 +784,7 @@ usb2_phy: usb2phy@4a084000 {
compatible = "ti,omap-usb2";
reg = <0x4a084000 0x7c>;
ctrl-module = <&omap_control_usb2phy>;
#phy-cells = <0>;
};
usb3_phy: usb3phy@4a084400 {
......@@ -758,6 +794,7 @@ usb3_phy: usb3phy@4a084400 {
<0x4a084c00 0x40>;
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_usb3phy>;
#phy-cells = <0>;
};
};
......@@ -777,14 +814,14 @@ usbhshost: usbhshost@4a064000 {
ranges;
usbhsohci: ohci@4a064800 {
compatible = "ti,ohci-omap3", "usb-ohci";
compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
};
usbhsehci: ehci@4a064c00 {
compatible = "ti,ehci-omap", "usb-ehci";
compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
......
arch/arm/boot/dts/tps65910.dtsi
View file @ 703cc5df
......@@ -82,5 +82,10 @@ vmmc_reg: regulator@12 {
reg = <12>;
regulator-compatible = "vmmc";
};
vbb_reg: regulator@13 {
reg = <13>;
regulator-compatible = "vbb";
};
};
};
arch/arm/boot/dts/twl4030.dtsi
View file @ 703cc5df
......@@ -145,4 +145,11 @@ twl_pwrbutton: pwrbutton {
compatible = "ti,twl4030-pwrbutton";
interrupts = <8>;
};
twl_keypad: keypad {
compatible = "ti,twl4030-keypad";
interrupts = <1>;
keypad,num-rows = <8>;
keypad,num-columns = <8>;
};
};
arch/arm/mach-omap2/clockdomains3xxx_data.c
View file @ 703cc5df
......@@ -247,7 +247,7 @@ static struct clockdomain neon_clkdm = {
static struct clockdomain iva2_clkdm = {
.name = "iva2_clkdm",
.pwrdm = { .name = "iva2_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.flags = CLKDM_CAN_SWSUP,
.dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
.wkdep_srcs = iva2_wkdeps,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
......
arch/arm/mach-omap2/devices.c
View file @ 703cc5df
......@@ -229,6 +229,9 @@ static struct omap_iommu_arch_data omap3_isp_iommu = {
int omap3_init_camera(struct isp_platform_data *pdata)
{
if (of_have_populated_dt())
omap3_isp_iommu.name = "480bd400.mmu";
omap3isp_device.dev.platform_data = pdata;
omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu;
......
arch/arm/mach-omap2/gpmc-nand.c
View file @ 703cc5df
......@@ -45,24 +45,31 @@ static struct platform_device gpmc_nand_device = {
static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
{
/* support only OMAP3 class */
if (!cpu_is_omap34xx() && !soc_is_am33xx()) {
pr_err("BCH ecc is not supported on this CPU\n");
/* platforms which support all ECC schemes */
if (soc_is_am33xx() || cpu_is_omap44xx() ||
soc_is_omap54xx() || soc_is_dra7xx())
return 1;
/* OMAP3xxx do not have ELM engine, so cannot support ECC schemes
* which require H/W based ECC error detection */
if ((cpu_is_omap34xx() || cpu_is_omap3630()) &&
((ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
(ecc_opt == OMAP_ECC_BCH8_CODE_HW)))
return 0;
}
/*
* For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1
* and AM33xx derivates. Other chips may be added if confirmed to work.
*/
if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) &&
(!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)) &&
(!soc_is_am33xx())) {
pr_err("BCH 4-bit mode is not supported on this CPU\n");
if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) &&
(!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)))
return 0;
}
/* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
if (ecc_opt == OMAP_ECC_HAM1_CODE_HW)
return 1;
else
return 0;
}
/* This function will go away once the device-tree convertion is complete */
......@@ -133,8 +140,10 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt))
if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
dev_err(dev, "Unsupported NAND ECC scheme selected\n");
return -EINVAL;
}
err = platform_device_register(&gpmc_nand_device);
if (err < 0) {
......
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View file @ 703cc5df
......@@ -3029,8 +3029,6 @@ static struct omap_hwmod omap3xxx_mmu_isp_hwmod = {
.flags = HWMOD_NO_IDLEST,
};
#ifdef CONFIG_OMAP_IOMMU_IVA2
/* mmu iva */
static struct omap_mmu_dev_attr mmu_iva_dev_attr = {
......@@ -3070,20 +3068,22 @@ static struct omap_hwmod omap3xxx_mmu_iva_hwmod = {
.name = "mmu_iva",
.class = &omap3xxx_mmu_hwmod_class,
.mpu_irqs = omap3xxx_mmu_iva_irqs,
.clkdm_name = "iva2_clkdm",
.rst_lines = omap3xxx_mmu_iva_resets,
.rst_lines_cnt = ARRAY_SIZE(omap3xxx_mmu_iva_resets),
.main_clk = "iva2_ck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_IVA2_MOD,
.module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
},
},
.dev_attr = &mmu_iva_dev_attr,
.flags = HWMOD_NO_IDLEST,
};
#endif
/* l4_per -> gpio4 */
static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
{
......@@ -3855,9 +3855,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__hdq1w,
&omap3xxx_sad2d__l3,
&omap3xxx_l4_core__mmu_isp,
#ifdef CONFIG_OMAP_IOMMU_IVA2
&omap3xxx_l3_main__mmu_iva,
#endif
&omap34xx_l4_core__ssi,
NULL
};
......@@ -3881,9 +3879,7 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__hdq1w,
&omap3xxx_sad2d__l3,
&omap3xxx_l4_core__mmu_isp,
#ifdef CONFIG_OMAP_IOMMU_IVA2
&omap3xxx_l3_main__mmu_iva,
#endif
NULL
};
......
arch/arm/mach-omap2/omap_hwmod_54xx_data.c
View file @ 703cc5df
......@@ -1121,6 +1121,71 @@ static struct omap_hwmod omap54xx_mmc5_hwmod = {
},
};
/*
* 'mmu' class
* The memory management unit performs virtual to physical address translation
* for its requestors.
*/
static struct omap_hwmod_class_sysconfig omap54xx_mmu_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap54xx_mmu_hwmod_class = {
.name = "mmu",
.sysc = &omap54xx_mmu_sysc,
};
static struct omap_hwmod_rst_info omap54xx_mmu_dsp_resets[] = {
{ .name = "mmu_cache", .rst_shift = 1 },
};
static struct omap_hwmod omap54xx_mmu_dsp_hwmod = {
.name = "mmu_dsp",
.class = &omap54xx_mmu_hwmod_class,
.clkdm_name = "dsp_clkdm",
.rst_lines = omap54xx_mmu_dsp_resets,
.rst_lines_cnt = ARRAY_SIZE(omap54xx_mmu_dsp_resets),
.main_clk = "dpll_iva_h11x2_ck",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP54XX_CM_DSP_DSP_CLKCTRL_OFFSET,
.rstctrl_offs = OMAP54XX_RM_DSP_RSTCTRL_OFFSET,
.context_offs = OMAP54XX_RM_DSP_DSP_CONTEXT_OFFSET,
.modulemode = MODULEMODE_HWCTRL,
},
},
};
/* mmu ipu */
static struct omap_hwmod_rst_info omap54xx_mmu_ipu_resets[] = {
{ .name = "mmu_cache", .rst_shift = 2 },
};
static struct omap_hwmod omap54xx_mmu_ipu_hwmod = {
.name = "mmu_ipu",
.class = &omap54xx_mmu_hwmod_class,
.clkdm_name = "ipu_clkdm",
.rst_lines = omap54xx_mmu_ipu_resets,
.rst_lines_cnt = ARRAY_SIZE(omap54xx_mmu_ipu_resets),
.main_clk = "dpll_core_h22x2_ck",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP54XX_CM_IPU_IPU_CLKCTRL_OFFSET,
.rstctrl_offs = OMAP54XX_RM_IPU_RSTCTRL_OFFSET,
.context_offs = OMAP54XX_RM_IPU_IPU_CONTEXT_OFFSET,
.modulemode = MODULEMODE_HWCTRL,
},
},
};
/*
* 'mpu' class
* mpu sub-system
......@@ -1763,6 +1828,14 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_1 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_cfg -> mmu_dsp */
static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mmu_dsp = {
.master = &omap54xx_l4_cfg_hwmod,
.slave = &omap54xx_mmu_dsp_hwmod,
.clk = "l4_root_clk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* mpu -> l3_main_1 */
static struct omap_hwmod_ocp_if omap54xx_mpu__l3_main_1 = {
.master = &omap54xx_mpu_hwmod,
......@@ -1787,6 +1860,14 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_2 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3_main_2 -> mmu_ipu */
static struct omap_hwmod_ocp_if omap54xx_l3_main_2__mmu_ipu = {
.master = &omap54xx_l3_main_2_hwmod,
.slave = &omap54xx_mmu_ipu_hwmod,
.clk = "l3_iclk_div",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3_main_1 -> l3_main_3 */
static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_3 = {
.master = &omap54xx_l3_main_1_hwmod,
......@@ -2345,6 +2426,7 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
&omap54xx_l4_wkup__counter_32k,
&omap54xx_l4_cfg__dma_system,
&omap54xx_l4_abe__dmic,
&omap54xx_l4_cfg__mmu_dsp,
&omap54xx_mpu__emif1,
&omap54xx_mpu__emif2,
&omap54xx_l4_wkup__gpio1,
......@@ -2360,6 +2442,7 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
&omap54xx_l4_per__i2c3,
&omap54xx_l4_per__i2c4,
&omap54xx_l4_per__i2c5,
&omap54xx_l3_main_2__mmu_ipu,
&omap54xx_l4_wkup__kbd,
&omap54xx_l4_cfg__mailbox,
&omap54xx_l4_abe__mcbsp1,
......
arch/arm/mach-omap2/pdata-quirks.c
View file @ 703cc5df
......@@ -16,12 +16,14 @@
#include <linux/wl12xx.h>
#include <linux/platform_data/pinctrl-single.h>
#include <linux/platform_data/iommu-omap.h>
#include "am35xx.h"
#include "common.h"
#include "common-board-devices.h"
#include "dss-common.h"
#include "control.h"
#include "omap_device.h"
struct pdata_init {
const char *compatible;
......@@ -31,20 +33,6 @@ struct pdata_init {
struct of_dev_auxdata omap_auxdata_lookup[];
static struct twl4030_gpio_platform_data twl_gpio_auxdata;
/*
* Create alias for USB host PHY clock.
* Remove this when clock phandle can be provided via DT
*/
static void __init __used legacy_init_ehci_clk(char *clkname)
{
int ret;
ret = clk_add_alias("main_clk", NULL, clkname, NULL);
if (ret)
pr_err("%s:Failed to add main_clk alias to %s :%d\n",
__func__, clkname, ret);
}
#if IS_ENABLED(CONFIG_WL12XX)
static struct wl12xx_platform_data wl12xx __initdata;
......@@ -92,6 +80,12 @@ static void __init hsmmc2_internal_input_clk(void)
omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1);
}
static struct iommu_platform_data omap3_iommu_pdata = {
.reset_name = "mmu",
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
static int omap3_sbc_t3730_twl_callback(struct device *dev,
unsigned gpio,
unsigned ngpio)
......@@ -99,7 +93,7 @@ static int omap3_sbc_t3730_twl_callback(struct device *dev,
int res;
res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
"wlan rst");
"wlan pwr");
if (res)
return res;
......@@ -108,6 +102,23 @@ static int omap3_sbc_t3730_twl_callback(struct device *dev,
return 0;
}
static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
{
int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name);
if (err) {
pr_err("SBC-T3x: %s reset gpio request failed: %d\n",
hub_name, err);
return;
}
gpio_export(gpio, 0);
udelay(10);
gpio_set_value(gpio, 1);
msleep(1);
}
static void __init omap3_sbc_t3730_twl_init(void)
{
twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
......@@ -115,10 +126,17 @@ static void __init omap3_sbc_t3730_twl_init(void)
static void __init omap3_sbc_t3730_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136);
omap_ads7846_init(1, 57, 0, NULL);
}
static void __init omap3_sbc_t3530_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
omap_ads7846_init(1, 57, 0, NULL);
}
static void __init omap3_igep0020_legacy_init(void)
{
omap3_igep2_display_init_of();
......@@ -160,7 +178,7 @@ static struct emac_platform_data am35xx_emac_pdata = {
.interrupt_disable = am35xx_disable_emac_int,
};
static void __init am3517_evm_legacy_init(void)
static void __init am35xx_emac_reset(void)
{
u32 v;
......@@ -169,6 +187,43 @@ static void __init am3517_evm_legacy_init(void)
omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
}
static struct gpio cm_t3517_wlan_gpios[] __initdata = {
{ 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" },
{ 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" },
};
static void __init omap3_sbc_t3517_wifi_init(void)
{
int err = gpio_request_array(cm_t3517_wlan_gpios,
ARRAY_SIZE(cm_t3517_wlan_gpios));
if (err) {
pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err);
return;
}
gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
msleep(100);
gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
}
static void __init omap3_sbc_t3517_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub");
omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub");
am35xx_emac_reset();
hsmmc2_internal_input_clk();
omap3_sbc_t3517_wifi_init();
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145);
omap_ads7846_init(1, 57, 0, NULL);
}
static void __init am3517_evm_legacy_init(void)
{
am35xx_emac_reset();
}
#endif /* CONFIG_ARCH_OMAP3 */
#ifdef CONFIG_ARCH_OMAP4
......@@ -182,15 +237,28 @@ static void __init omap4_sdp_legacy_init(void)
static void __init omap4_panda_legacy_init(void)
{
omap4_panda_display_init_of();
legacy_init_ehci_clk("auxclk3_ck");
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
}
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
static struct iommu_platform_data omap4_iommu_pdata = {
.reset_name = "mmu_cache",
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
#endif
#ifdef CONFIG_SOC_AM33XX
static void __init am335x_evmsk_legacy_init(void)
{
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 31);
}
#endif
#ifdef CONFIG_SOC_OMAP5
static void __init omap5_uevm_legacy_init(void)
{
legacy_init_ehci_clk("auxclk1_ck");
}
#endif
......@@ -240,6 +308,8 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
&omap3_iommu_pdata),
/* Only on am3517 */
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
......@@ -248,6 +318,12 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#ifdef CONFIG_ARCH_OMAP4
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
&omap4_iommu_pdata),
OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
&omap4_iommu_pdata),
#endif
{ /* sentinel */ },
};
......@@ -258,6 +334,8 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
*/
static struct pdata_init pdata_quirks[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3517", omap3_sbc_t3517_legacy_init, },
{ "compulab,omap3-sbc-t3530", omap3_sbc_t3530_legacy_init, },
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
......@@ -271,6 +349,9 @@ static struct pdata_init pdata_quirks[] __initdata = {
{ "ti,omap4-sdp", omap4_sdp_legacy_init, },
{ "ti,omap4-panda", omap4_panda_legacy_init, },
#endif
#ifdef CONFIG_SOC_AM33XX
{ "ti,am335x-evmsk", am335x_evmsk_legacy_init, },
#endif
#ifdef CONFIG_SOC_OMAP5
{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
#endif
......
arch/arm/plat-omap/Kconfig
View file @ 703cc5df
......@@ -86,9 +86,6 @@ config OMAP_MUX_WARNINGS
to change the pin multiplexing setup. When there are no warnings
printed, it's safe to deselect OMAP_MUX for your product.
config OMAP_IOMMU_IVA2
bool
config OMAP_MPU_TIMER
bool "Use mpu timer"
depends on ARCH_OMAP1
......
include/dt-bindings/pinctrl/am43xx.h
View file @ 703cc5df
......@@ -13,6 +13,7 @@
#define MUX_MODE5 5
#define MUX_MODE6 6
#define MUX_MODE7 7
#define MUX_MODE8 8
#define PULL_DISABLE (1 << 16)
#define PULL_UP (1 << 17)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7