Commit 70beaed2 authored by Jiri Slaby's avatar Jiri Slaby Committed by Linus Torvalds

serial: refactor ASYNC_ flags

Define ASYNCB_* flags which are bit numbers of the ASYNC_* flags.
This is useful for {test,set,clear}_bit.

Also convert each ASYNC_% to be (1 << ASYNCB_%) and define masks
with the macros, not constants.

Tested with:
#include "PATH_TO_KERNEL/include/linux/serial.h"
static struct {
        unsigned int new, old;
} as[] = {
        { ASYNC_HUP_NOTIFY, 0x0001 },
        { ASYNC_FOURPORT, 0x0002 },
...
	{ ASYNC_BOOT_ONLYMCA, 0x00400000 },
        { ASYNC_INTERNAL_FLAGS, 0xFFC00000 }
};
...
        for (a = 0; a < ARRAY_SIZE(as); a++)
                if (as[a].old != as[a].new)
                        printf("%.8x != %.8x\n", as[a].old, as[a].new);
Signed-off-by: default avatarJiri Slaby <jirislaby@gmail.com>
Signed-off-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 6e47e069
...@@ -96,54 +96,76 @@ struct serial_uart_config { ...@@ -96,54 +96,76 @@ struct serial_uart_config {
/* /*
* Definitions for async_struct (and serial_struct) flags field * Definitions for async_struct (and serial_struct) flags field
*
* Define ASYNCB_* for convenient use with {test,set,clear}_bit.
*/ */
#define ASYNC_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes #define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes
on the callout port */ * on the callout port */
#define ASYNC_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */ #define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */
#define ASYNC_SAK 0x0004 /* Secure Attention Key (Orange book) */ #define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */
#define ASYNC_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */ #define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */
#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */
#define ASYNC_SPD_MASK 0x1030 #define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */
#define ASYNC_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */ #define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */
#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during
#define ASYNC_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */ * autoconfiguration */
#define ASYNC_SPD_CUST 0x0030 /* Use user-specified divisor */ #define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */
#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */
#define ASYNC_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */ #define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */
#define ASYNC_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */ #define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */
#define ASYNC_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */ #define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */
#define ASYNC_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */ #define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */
#define ASYNC_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */ #define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety
#define ASYNC_HARDPPS_CD 0x0800 /* Call hardpps when CD goes high */
#define ASYNC_SPD_SHI 0x1000 /* Use 230400 instead of 38400 bps */
#define ASYNC_SPD_WARP 0x1010 /* Use 460800 instead of 38400 bps */
#define ASYNC_LOW_LATENCY 0x2000 /* Request low latency behaviour */
#define ASYNC_BUGGY_UART 0x4000 /* This is a buggy UART, skip some safety
* checks. Note: can be dangerous! */ * checks. Note: can be dangerous! */
#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */
#define ASYNC_AUTOPROBE 0x8000 /* Port was autoprobed by PCI or PNP code */ #define ASYNCB_LAST_USER 15
#define ASYNC_FLAGS 0x7FFF /* Possible legal async flags */ /* Internal flags used only by kernel */
#define ASYNC_USR_MASK 0x3430 /* Legal flags that non-privileged #define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
* users can set or reset */ #define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
/* Internal flags used only by kernel/chr_drv/serial.c */ #define ASYNCB_CLOSING 27 /* Serial port is closing */
#define ASYNC_INITIALIZED 0x80000000 /* Serial port was initialized */ #define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */
#define ASYNC_NORMAL_ACTIVE 0x20000000 /* Normal device is active */ #define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */
#define ASYNC_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */ #define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */
#define ASYNC_CLOSING 0x08000000 /* Serial port is closing */ #define ASYNCB_CONS_FLOW 23 /* flow control for console */
#define ASYNC_CTS_FLOW 0x04000000 /* Do CTS flow control */ #define ASYNCB_BOOT_ONLYMCA 22 /* Probe only if MCA bus */
#define ASYNC_CHECK_CD 0x02000000 /* i.e., CLOCAL */ #define ASYNCB_FIRST_KERNEL 22
#define ASYNC_SHARE_IRQ 0x01000000 /* for multifunction cards
--- no longer used */ #define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
#define ASYNC_CONS_FLOW 0x00800000 /* flow control for console */ #define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
#define ASYNC_SAK (1U << ASYNCB_SAK)
#define ASYNC_BOOT_ONLYMCA 0x00400000 /* Probe only if MCA bus */ #define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
#define ASYNC_INTERNAL_FLAGS 0xFFC00000 /* Internal flags */ #define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI)
#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI)
#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST)
#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ)
#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT)
#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT)
#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP)
#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD)
#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI)
#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY)
#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
#define ASYNC_FLAGS ((1U << ASYNCB_LAST_USER) - 1)
#define ASYNC_USR_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI| \
ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY)
#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF)
#define ASYNC_CLOSING (1U << ASYNCB_CLOSING)
#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW)
#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD)
#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ)
#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW)
#define ASYNC_BOOT_ONLYMCA (1U << ASYNCB_BOOT_ONLYMCA)
#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1))
/* /*
* Multiport serial configuration structure --- external structure * Multiport serial configuration structure --- external structure
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment