Skip to content

L
linux
Commit 71354f77 authored by Joel Stanley's avatar Joel Stanley
Browse files
Options

ARM: dts: aspeed: rainier: Reorganise FSI description 

Use the P10 quad FSI CFAM description to reduce duplication.

Link: https://lore.kernel.org/r/20230809074921.116987-4-joel@jms.id.auSigned-off-by: default avatarJoel Stanley <joel@jms.id.au>
parent f868aab8
Show whitespace changes
Inline Side-by-side
Showing with 2 additions and 676 deletions
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
View file @ 71354f77
......@@ -12,39 +12,6 @@ / {
compatible = "ibm,rainier-bmc", "aspeed,ast2600";
aliases {
i2c100 = &cfam0_i2c0;
i2c101 = &cfam0_i2c1;
i2c110 = &cfam0_i2c10;
i2c111 = &cfam0_i2c11;
i2c112 = &cfam0_i2c12;
i2c113 = &cfam0_i2c13;
i2c114 = &cfam0_i2c14;
i2c115 = &cfam0_i2c15;
i2c202 = &cfam1_i2c2;
i2c203 = &cfam1_i2c3;
i2c210 = &cfam1_i2c10;
i2c211 = &cfam1_i2c11;
i2c214 = &cfam1_i2c14;
i2c215 = &cfam1_i2c15;
i2c216 = &cfam1_i2c16;
i2c217 = &cfam1_i2c17;
i2c300 = &cfam2_i2c0;
i2c301 = &cfam2_i2c1;
i2c310 = &cfam2_i2c10;
i2c311 = &cfam2_i2c11;
i2c312 = &cfam2_i2c12;
i2c313 = &cfam2_i2c13;
i2c314 = &cfam2_i2c14;
i2c315 = &cfam2_i2c15;
i2c402 = &cfam3_i2c2;
i2c403 = &cfam3_i2c3;
i2c410 = &cfam3_i2c10;
i2c411 = &cfam3_i2c11;
i2c414 = &cfam3_i2c14;
i2c415 = &cfam3_i2c15;
i2c416 = &cfam3_i2c16;
i2c417 = &cfam3_i2c17;
serial4 = &uart5;
i2c16 = &i2c2mux0;
i2c17 = &i2c2mux1;
......@@ -61,23 +28,6 @@ aliases {
i2c28 = &i2c6mux0chn3;
i2c29 = &i2c11mux0chn0;
i2c30 = &i2c11mux0chn1;
spi10 = &cfam0_spi0;
spi11 = &cfam0_spi1;
spi12 = &cfam0_spi2;
spi13 = &cfam0_spi3;
spi20 = &cfam1_spi0;
spi21 = &cfam1_spi1;
spi22 = &cfam1_spi2;
spi23 = &cfam1_spi3;
spi30 = &cfam2_spi0;
spi31 = &cfam2_spi1;
spi32 = &cfam2_spi2;
spi33 = &cfam2_spi3;
spi40 = &cfam3_spi0;
spi41 = &cfam3_spi1;
spi42 = &cfam3_spi2;
spi43 = &cfam3_spi3;
};
chosen {
......@@ -301,632 +251,6 @@ &emmc {
clk-phase-mmc-hs200 = <180>, <180>;
};
&fsim0 {
status = "okay";
#address-cells = <2>;
#size-cells = <0>;
/*
* CFAM Reset is supposed to be active low but pass1 hardware is wired
* active high.
*/
cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
cfam@0,0 {
reg = <0 0>;
#address-cells = <1>;
#size-cells = <1>;
chip-id = <0>;
scom@1000 {
compatible = "ibm,fsi2pib";
reg = <0x1000 0x400>;
};
i2c@1800 {
compatible = "ibm,fsi-i2c-master";
reg = <0x1800 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam0_i2c0: i2c-bus@0 {
reg = <0>; /* OMI01 */
};
cfam0_i2c1: i2c-bus@1 {
reg = <1>; /* OMI23 */
};
cfam0_i2c10: i2c-bus@a {
reg = <10>; /* OP3A */
};
cfam0_i2c11: i2c-bus@b {
reg = <11>; /* OP3B */
};
cfam0_i2c12: i2c-bus@c {
reg = <12>; /* OP4A */
};
cfam0_i2c13: i2c-bus@d {
reg = <13>; /* OP4B */
};
cfam0_i2c14: i2c-bus@e {
reg = <14>; /* OP5A */
};
cfam0_i2c15: i2c-bus@f {
reg = <15>; /* OP5B */
};
};
fsi2spi@1c00 {
compatible = "ibm,fsi2spi";
reg = <0x1c00 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam0_spi0: spi@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam0_spi1: spi@20 {
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam0_spi2: spi@40 {
reg = <0x40>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam0_spi3: spi@60 {
reg = <0x60>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
};
sbefifo@2400 {
compatible = "ibm,p9-sbefifo";
reg = <0x2400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
fsi_occ0: occ {
compatible = "ibm,p10-occ";
occ-hwmon {
compatible = "ibm,p10-occ-hwmon";
ibm,no-poll-on-init;
};
};
};
fsi_hub0: hub@3400 {
compatible = "fsi-master-hub";
reg = <0x3400 0x400>;
#address-cells = <2>;
#size-cells = <0>;
};
};
};
&fsi_hub0 {
cfam@1,0 {
reg = <1 0>;
#address-cells = <1>;
#size-cells = <1>;
chip-id = <1>;
scom@1000 {
compatible = "ibm,fsi2pib";
reg = <0x1000 0x400>;
};
i2c@1800 {
compatible = "ibm,fsi-i2c-master";
reg = <0x1800 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam1_i2c2: i2c-bus@2 {
reg = <2>; /* OMI45 */
};
cfam1_i2c3: i2c-bus@3 {
reg = <3>; /* OMI67 */
};
cfam1_i2c10: i2c-bus@a {
reg = <10>; /* OP3A */
};
cfam1_i2c11: i2c-bus@b {
reg = <11>; /* OP3B */
};
cfam1_i2c14: i2c-bus@e {
reg = <14>; /* OP5A */
};
cfam1_i2c15: i2c-bus@f {
reg = <15>; /* OP5B */
};
cfam1_i2c16: i2c-bus@10 {
reg = <16>; /* OP6A */
};
cfam1_i2c17: i2c-bus@11 {
reg = <17>; /* OP6B */
};
};
fsi2spi@1c00 {
compatible = "ibm,fsi2spi";
reg = <0x1c00 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam1_spi0: spi@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam1_spi1: spi@20 {
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam1_spi2: spi@40 {
reg = <0x40>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam1_spi3: spi@60 {
reg = <0x60>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
};
sbefifo@2400 {
compatible = "ibm,p9-sbefifo";
reg = <0x2400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
fsi_occ1: occ {
compatible = "ibm,p10-occ";
occ-hwmon {
compatible = "ibm,p10-occ-hwmon";
ibm,no-poll-on-init;
};
};
};
fsi_hub1: hub@3400 {
compatible = "fsi-master-hub";
reg = <0x3400 0x400>;
#address-cells = <2>;
#size-cells = <0>;
no-scan-on-init;
};
};
cfam@2,0 {
reg = <2 0>;
#address-cells = <1>;
#size-cells = <1>;
chip-id = <2>;
scom@1000 {
compatible = "ibm,fsi2pib";
reg = <0x1000 0x400>;
};
i2c@1800 {
compatible = "ibm,fsi-i2c-master";
reg = <0x1800 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam2_i2c0: i2c-bus@0 {
reg = <0>; /* OM01 */
};
cfam2_i2c1: i2c-bus@1 {
reg = <1>; /* OM23 */
};
cfam2_i2c10: i2c-bus@a {
reg = <10>; /* OP3A */
};
cfam2_i2c11: i2c-bus@b {
reg = <11>; /* OP3B */
};
cfam2_i2c12: i2c-bus@c {
reg = <12>; /* OP4A */
};
cfam2_i2c13: i2c-bus@d {
reg = <13>; /* OP4B */
};
cfam2_i2c14: i2c-bus@e {
reg = <14>; /* OP5A */
};
cfam2_i2c15: i2c-bus@f {
reg = <15>; /* OP5B */
};
};
fsi2spi@1c00 {
compatible = "ibm,fsi2spi";
reg = <0x1c00 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam2_spi0: spi@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam2_spi1: spi@20 {
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam2_spi2: spi@40 {
reg = <0x40>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam2_spi3: spi@60 {
reg = <0x60>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
};
sbefifo@2400 {
compatible = "ibm,p9-sbefifo";
reg = <0x2400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
fsi_occ2: occ {
compatible = "ibm,p10-occ";
occ-hwmon {
compatible = "ibm,p10-occ-hwmon";
ibm,no-poll-on-init;
};
};
};
fsi_hub2: hub@3400 {
compatible = "fsi-master-hub";
reg = <0x3400 0x400>;
#address-cells = <2>;
#size-cells = <0>;
no-scan-on-init;
};
};
cfam@3,0 {
reg = <3 0>;
#address-cells = <1>;
#size-cells = <1>;
chip-id = <3>;
scom@1000 {
compatible = "ibm,fsi2pib";
reg = <0x1000 0x400>;
};
i2c@1800 {
compatible = "ibm,fsi-i2c-master";
reg = <0x1800 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam3_i2c2: i2c-bus@2 {
reg = <2>; /* OM45 */
};
cfam3_i2c3: i2c-bus@3 {
reg = <3>; /* OM67 */
};
cfam3_i2c10: i2c-bus@a {
reg = <10>; /* OP3A */
};
cfam3_i2c11: i2c-bus@b {
reg = <11>; /* OP3B */
};
cfam3_i2c14: i2c-bus@e {
reg = <14>; /* OP5A */
};
cfam3_i2c15: i2c-bus@f {
reg = <15>; /* OP5B */
};
cfam3_i2c16: i2c-bus@10 {
reg = <16>; /* OP6A */
};
cfam3_i2c17: i2c-bus@11 {
reg = <17>; /* OP6B */
};
};
fsi2spi@1c00 {
compatible = "ibm,fsi2spi";
reg = <0x1c00 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam3_spi0: spi@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam3_spi1: spi@20 {
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam3_spi2: spi@40 {
reg = <0x40>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam3_spi3: spi@60 {
reg = <0x60>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
};
sbefifo@2400 {
compatible = "ibm,p9-sbefifo";
reg = <0x2400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
fsi_occ3: occ {
compatible = "ibm,p10-occ";
occ-hwmon {
compatible = "ibm,p10-occ-hwmon";
ibm,no-poll-on-init;
};
};
};
fsi_hub3: hub@3400 {
compatible = "fsi-master-hub";
reg = <0x3400 0x400>;
#address-cells = <2>;
#size-cells = <0>;
no-scan-on-init;
};
};
};
/* Legacy OCC numbering (to get rid of when userspace is fixed) */
&fsi_occ0 {
reg = <1>;
};
&fsi_occ1 {
reg = <2>;
};
&fsi_occ2 {
reg = <3>;
};
&fsi_occ3 {
reg = <4>;
};
&ibt {
status = "okay";
};
......@@ -2413,3 +1737,5 @@ &kcs3 {
aspeed,lpc-io-reg = <0xca2>;
aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
};
#include "ibm-power10-quad.dtsi"
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7