Merge tag 'usb-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: changes for v5.5

We have TI's glue layer for the Cadence USB3 controller going
upstream. Tegra's XUDC driver is also going upstream with this pull
request.

Apart from these two big features, we have a bunch of patches switching
over to devm_platform_ioremap_resource() in order to simplify code a
little; and a non-critical fix for DWC3 usage via kexec.

* tag 'usb-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (44 commits)
  usb: dwc3: of-simple: add a shutdown
  usb: cdns3: Add TI specific wrapper driver
  dt-bindings: usb: Add binding for the TI wrapper for Cadence USB3 controller
  usb: mtu3: fix race condition about delayed_status
  usb: gadget: Add UDC driver for tegra XUSB device mode controller
  usb: dwc3: debug: Remove newline printout
  usb: dwc2: use a longer core rest timeout in dwc2_core_reset()
  usb: gadget: udc: lpc32xx: Use devm_platform_ioremap_resource() in lpc32xx_udc_probe()
  USB: gadget: udc: clean up an indentation issue
  usb: gadget: Quieten gadget config message
  phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irq
  usb: gadget: Remove set but not used variable 'opts' in msg_do_config
  usb: gadget: Remove set but not used variable 'opts' in acm_ms_do_config
  usb: mtu3: add a new function to do status stage
  usb: gadget: configfs: fix concurrent issue between composite APIs
  usb: gadget: f_tcm: Provide support to get alternate setting in tcm function
  usb: gadget: Correct NULL pointer checking in fsl gadget
  usb: fsl: Remove unused variable
  USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein
  USB: dummy-hcd: increase max number of devices to 32
  ...

Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/ti,j721e-usb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Bindings for the TI wrapper module for the Cadence USBSS-DRD controller
+
+maintainers:
+  - Roger Quadros <rogerq@ti.com>
+
+properties:
+  compatible:
+    items:
+      - const: ti,j721e-usb
+
+  reg:
+    description: module registers
+
+  power-domains:
+    description:
+       PM domain provider node and an args specifier containing
+       the USB device id value. See,
+       Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+
+  clocks:
+    description: Clock phandles to usb2_refclk and lpm_clk
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ref
+      - const: lpm
+
+  ti,usb2-only:
+    description:
+      If present, it restricts the controller to USB2.0 mode of
+      operation. Must be present if USB3 PHY is not available
+      for USB.
+    type: boolean
+
+  ti,vbus-divider:
+    description:
+      Should be present if USB VBUS line is connected to the
+      VBUS pin of the SoC via a 1/3 voltage divider.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    cdns_usb@4104000 {
+          compatible = "ti,j721e-usb";
+          reg = <0x00 0x4104000 0x00 0x100>;
+          power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+          clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
+          clock-names = "ref", "lpm";
+          assigned-clocks = <&k3_clks 288 15>;	/* USB2_REFCLK */
+          assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
+          #address-cells = <2>;
+          #size-cells = <2>;
+
+          usb@6000000 {
+                compatible = "cdns,usb3";
+                reg = <0x00 0x6000000 0x00 0x10000>,
+                      <0x00 0x6010000 0x00 0x10000>,
+                      <0x00 0x6020000 0x00 0x10000>;
+                reg-names = "otg", "xhci", "dev";
+                interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
+                             <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
+                             <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
+                interrupt-names = "host",
+                                  "peripheral",
+                                  "otg";
+                maximum-speed = "super-speed";
+                dr_mode = "otg";
+        };
+    };

drivers/phy/renesas/phy-rcar-gen3-usb2.c

@@ -614,7 +614,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 		return PTR_ERR(channel->base);
 
 	/* call request_irq for OTG */
-	irq = platform_get_irq(pdev, 0);
+	irq = platform_get_irq_optional(pdev, 0);
 	if (irq >= 0) {
 		INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
 		irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,

drivers/usb/cdns3/Kconfig

@@ -43,4 +43,14 @@ config USB_CDNS3_PCI_WRAP
 	  If you choose to build this driver as module it will
 	  be dynamically linked and module will be called cdns3-pci.ko
 
+config USB_CDNS3_TI
+	tristate "Cadence USB3 support on TI platforms"
+	depends on ARCH_K3 || COMPILE_TEST
+	default USB_CDNS3
+	help
+	  Say 'Y' or 'M' here if you are building for Texas Instruments
+	  platforms that contain Cadence USB3 controller core.
+
+	  e.g. J721e.
+
 endif

drivers/usb/cdns3/Makefile

@@ -14,3 +14,4 @@ endif
 cdns3-$(CONFIG_USB_CDNS3_HOST)		+= host.o
 
 obj-$(CONFIG_USB_CDNS3_PCI_WRAP)	+= cdns3-pci-wrap.o
+obj-$(CONFIG_USB_CDNS3_TI)		+= cdns3-ti.o

drivers/usb/cdns3/cdns3-ti.c

+// SPDX-License-Identifier: GPL-2.0
+/**
+ * cdns3-ti.c - TI specific Glue layer for Cadence USB Controller
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+
+/* USB Wrapper register offsets */
+#define USBSS_PID		0x0
+#define	USBSS_W1		0x4
+#define USBSS_STATIC_CONFIG	0x8
+#define USBSS_PHY_TEST		0xc
+#define	USBSS_DEBUG_CTRL	0x10
+#define	USBSS_DEBUG_INFO	0x14
+#define	USBSS_DEBUG_LINK_STATE	0x18
+#define	USBSS_DEVICE_CTRL	0x1c
+
+/* Wrapper 1 register bits */
+#define USBSS_W1_PWRUP_RST		BIT(0)
+#define USBSS_W1_OVERCURRENT_SEL	BIT(8)
+#define USBSS_W1_MODESTRAP_SEL		BIT(9)
+#define USBSS_W1_OVERCURRENT		BIT(16)
+#define USBSS_W1_MODESTRAP_MASK		GENMASK(18, 17)
+#define USBSS_W1_MODESTRAP_SHIFT	17
+#define USBSS_W1_USB2_ONLY		BIT(19)
+
+/* Static config register bits */
+#define USBSS1_STATIC_PLL_REF_SEL_MASK	GENMASK(8, 5)
+#define USBSS1_STATIC_PLL_REF_SEL_SHIFT	5
+#define USBSS1_STATIC_LOOPBACK_MODE_MASK	GENMASK(4, 3)
+#define USBSS1_STATIC_LOOPBACK_MODE_SHIFT	3
+#define USBSS1_STATIC_VBUS_SEL_MASK	GENMASK(2, 1)
+#define USBSS1_STATIC_VBUS_SEL_SHIFT	1
+#define USBSS1_STATIC_LANE_REVERSE	BIT(0)
+
+/* Modestrap modes */
+enum modestrap_mode { USBSS_MODESTRAP_MODE_NONE,
+		      USBSS_MODESTRAP_MODE_HOST,
+		      USBSS_MODESTRAP_MODE_PERIPHERAL};
+
+struct cdns_ti {
+	struct device *dev;
+	void __iomem *usbss;
+	int usb2_only:1;
+	int vbus_divider:1;
+	struct clk *usb2_refclk;
+	struct clk *lpm_clk;
+};
+
+static const int cdns_ti_rate_table[] = {	/* in KHZ */
+	9600,
+	10000,
+	12000,
+	19200,
+	20000,
+	24000,
+	25000,
+	26000,
+	38400,
+	40000,
+	58000,
+	50000,
+	52000,
+};
+
+static inline u32 cdns_ti_readl(struct cdns_ti *data, u32 offset)
+{
+	return readl(data->usbss + offset);
+}
+
+static inline void cdns_ti_writel(struct cdns_ti *data, u32 offset, u32 value)
+{
+	writel(value, data->usbss + offset);
+}
+
+static int cdns_ti_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = pdev->dev.of_node;
+	struct cdns_ti *data;
+	int error;
+	u32 reg;
+	int rate_code, i;
+	unsigned long rate;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, data);
+
+	data->dev = dev;
+
+	data->usbss = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(data->usbss)) {
+		dev_err(dev, "can't map IOMEM resource\n");
+		return PTR_ERR(data->usbss);
+	}
+
+	data->usb2_refclk = devm_clk_get(dev, "ref");
+	if (IS_ERR(data->usb2_refclk)) {
+		dev_err(dev, "can't get usb2_refclk\n");
+		return PTR_ERR(data->usb2_refclk);
+	}
+
+	data->lpm_clk = devm_clk_get(dev, "lpm");
+	if (IS_ERR(data->lpm_clk)) {
+		dev_err(dev, "can't get lpm_clk\n");
+		return PTR_ERR(data->lpm_clk);
+	}
+
+	rate = clk_get_rate(data->usb2_refclk);
+	rate /= 1000;	/* To KHz */
+	for (i = 0; i < ARRAY_SIZE(cdns_ti_rate_table); i++) {
+		if (cdns_ti_rate_table[i] == rate)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(cdns_ti_rate_table)) {
+		dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate);
+		return -EINVAL;
+	}
+
+	rate_code = i;
+
+	pm_runtime_enable(dev);
+	error = pm_runtime_get_sync(dev);
+	if (error < 0) {
+		dev_err(dev, "pm_runtime_get_sync failed: %d\n", error);
+		goto err_get;
+	}
+
+	/* assert RESET */
+	reg = cdns_ti_readl(data, USBSS_W1);
+	reg &= ~USBSS_W1_PWRUP_RST;
+	cdns_ti_writel(data, USBSS_W1, reg);
+
+	/* set static config */
+	reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
+	reg &= ~USBSS1_STATIC_PLL_REF_SEL_MASK;
+	reg |= rate_code << USBSS1_STATIC_PLL_REF_SEL_SHIFT;
+
+	reg &= ~USBSS1_STATIC_VBUS_SEL_MASK;
+	data->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
+	if (data->vbus_divider)
+		reg |= 1 << USBSS1_STATIC_VBUS_SEL_SHIFT;
+
+	cdns_ti_writel(data, USBSS_STATIC_CONFIG, reg);
+	reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
+
+	/* set USB2_ONLY mode if requested */
+	reg = cdns_ti_readl(data, USBSS_W1);
+	data->usb2_only = device_property_read_bool(dev, "ti,usb2-only");
+	if (data->usb2_only)
+		reg |= USBSS_W1_USB2_ONLY;
+
+	/* set default modestrap */
+	reg |= USBSS_W1_MODESTRAP_SEL;
+	reg &= ~USBSS_W1_MODESTRAP_MASK;
+	reg |= USBSS_MODESTRAP_MODE_NONE << USBSS_W1_MODESTRAP_SHIFT;
+	cdns_ti_writel(data, USBSS_W1, reg);
+
+	/* de-assert RESET */
+	reg |= USBSS_W1_PWRUP_RST;
+	cdns_ti_writel(data, USBSS_W1, reg);
+
+	error = of_platform_populate(node, NULL, NULL, dev);
+	if (error) {
+		dev_err(dev, "failed to create children: %d\n", error);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	pm_runtime_put_sync(data->dev);
+err_get:
+	pm_runtime_disable(data->dev);
+
+	return error;
+}
+
+static int cdns_ti_remove_core(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static int cdns_ti_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	device_for_each_child(dev, NULL, cdns_ti_remove_core);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id cdns_ti_of_match[] = {
+	{ .compatible = "ti,j721e-usb", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cdns_ti_of_match);
+
+static struct platform_driver cdns_ti_driver = {
+	.probe		= cdns_ti_probe,
+	.remove		= cdns_ti_remove,
+	.driver		= {
+		.name	= "cdns3-ti",
+		.of_match_table	= cdns_ti_of_match,
+	},
+};
+
+module_platform_driver(cdns_ti_driver);
+
+MODULE_ALIAS("platform:cdns3-ti");
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USB3 TI Glue Layer");

drivers/usb/dwc2/core.c

@@ -524,7 +524,7 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait)
 	greset |= GRSTCTL_CSFTRST;
 	dwc2_writel(hsotg, greset, GRSTCTL);
 
-	if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_CSFTRST, 50)) {
+	if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_CSFTRST, 10000)) {
 		dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL GRSTCTL_CSFTRST\n",
 			 __func__);
 		return -EBUSY;

drivers/usb/dwc3/core.c

@@ -566,8 +566,11 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc)
  */
 static int dwc3_phy_setup(struct dwc3 *dwc)
 {
+	unsigned int hw_mode;
 	u32 reg;
 
+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
 
 	/*
@@ -585,6 +588,14 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
 	if (dwc->revision > DWC3_REVISION_194A)
 		reg |= DWC3_GUSB3PIPECTL_SUSPHY;
 
+	/*
+	 * For DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be cleared after
+	 * power-on reset, and it can be set after core initialization, which is
+	 * after device soft-reset during initialization.
+	 */
+	if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD)
+		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+
 	if (dwc->u2ss_inp3_quirk)
 		reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK;
 
@@ -668,6 +679,14 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
 	if (dwc->revision > DWC3_REVISION_194A)
 		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
 
+	/*
+	 * For DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared after
+	 * power-on reset, and it can be set after core initialization, which is
+	 * after device soft-reset during initialization.
+	 */
+	if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD)
+		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+
 	if (dwc->dis_u2_susphy_quirk)
 		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
 
@@ -902,9 +921,12 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc)
  */
 static int dwc3_core_init(struct dwc3 *dwc)
 {
+	unsigned int		hw_mode;
 	u32			reg;
 	int			ret;
 
+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+
 	/*
 	 * Write Linux Version Code to our GUID register so it's easy to figure
 	 * out which kernel version a bug was found.
@@ -940,6 +962,21 @@ static int dwc3_core_init(struct dwc3 *dwc)
 	if (ret)
 		goto err0a;
 
+	if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
+	    dwc->revision > DWC3_REVISION_194A) {
+		if (!dwc->dis_u3_susphy_quirk) {
+			reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+			reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+			dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+		}
+
+		if (!dwc->dis_u2_susphy_quirk) {
+			reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+			reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+		}
+	}
+
 	dwc3_core_setup_global_control(dwc);
 	dwc3_core_num_eps(dwc);
 

drivers/usb/dwc3/debug.h

@@ -112,7 +112,7 @@ dwc3_gadget_link_string(enum dwc3_link_state link_state)
 	case DWC3_LINK_STATE_RESUME:
 		return "Resume";
 	default:
-		return "UNKNOWN link state\n";
+		return "UNKNOWN link state";
 	}
 }
 
@@ -141,7 +141,7 @@ dwc3_gadget_hs_link_string(enum dwc3_link_state link_state)
 	case DWC3_LINK_STATE_RESUME:
 		return "Resume";
 	default:
-		return "UNKNOWN link state\n";
+		return "UNKNOWN link state";
 	}
 }
 

drivers/usb/dwc3/dwc3-of-simple.c

@@ -110,12 +110,9 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int dwc3_of_simple_remove(struct platform_device *pdev)
+static void __dwc3_of_simple_teardown(struct dwc3_of_simple *simple)
 {
-	struct dwc3_of_simple	*simple = platform_get_drvdata(pdev);
-	struct device		*dev = &pdev->dev;
-
-	of_platform_depopulate(dev);
+	of_platform_depopulate(simple->dev);
 
 	clk_bulk_disable_unprepare(simple->num_clocks, simple->clks);
 	clk_bulk_put_all(simple->num_clocks, simple->clks);
@@ -126,13 +123,27 @@ static int dwc3_of_simple_remove(struct platform_device *pdev)
 
 	reset_control_put(simple->resets);
 
-	pm_runtime_disable(dev);
-	pm_runtime_put_noidle(dev);
-	pm_runtime_set_suspended(dev);
+	pm_runtime_disable(simple->dev);
+	pm_runtime_put_noidle(simple->dev);
+	pm_runtime_set_suspended(simple->dev);
+}
+
+static int dwc3_of_simple_remove(struct platform_device *pdev)
+{
+	struct dwc3_of_simple	*simple = platform_get_drvdata(pdev);
+
+	__dwc3_of_simple_teardown(simple);
 
 	return 0;
 }
 
+static void dwc3_of_simple_shutdown(struct platform_device *pdev)
+{
+	struct dwc3_of_simple	*simple = platform_get_drvdata(pdev);
+
+	__dwc3_of_simple_teardown(simple);
+}
+
 static int __maybe_unused dwc3_of_simple_runtime_suspend(struct device *dev)
 {
 	struct dwc3_of_simple	*simple = dev_get_drvdata(dev);
@@ -190,6 +201,7 @@ MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);
 static struct platform_driver dwc3_of_simple_driver = {
 	.probe		= dwc3_of_simple_probe,
 	.remove		= dwc3_of_simple_remove,
+	.shutdown	= dwc3_of_simple_shutdown,
 	.driver		= {
 		.name	= "dwc3-of-simple",
 		.of_match_table = of_dwc3_simple_match,

drivers/usb/gadget/composite.c

@@ -794,7 +794,7 @@ static int set_config(struct usb_composite_dev *cdev,
 		result = 0;
 	}
 
-	INFO(cdev, "%s config #%d: %s\n",
+	DBG(cdev, "%s config #%d: %s\n",
 	    usb_speed_string(gadget->speed),
 	    number, c ? c->label : "unconfigured");
 

drivers/usb/gadget/function/f_acm.c

@@ -771,6 +771,24 @@ static struct configfs_item_operations acm_item_ops = {
 	.release                = acm_attr_release,
 };
 
+#ifdef CONFIG_U_SERIAL_CONSOLE
+
+static ssize_t f_acm_console_store(struct config_item *item,
+		const char *page, size_t count)
+{
+	return gserial_set_console(to_f_serial_opts(item)->port_num,
+				   page, count);
+}
+
+static ssize_t f_acm_console_show(struct config_item *item, char *page)
+{
+	return gserial_get_console(to_f_serial_opts(item)->port_num, page);
+}
+
+CONFIGFS_ATTR(f_acm_, console);
+
+#endif /* CONFIG_U_SERIAL_CONSOLE */
+
 static ssize_t f_acm_port_num_show(struct config_item *item, char *page)
 {
 	return sprintf(page, "%u\n", to_f_serial_opts(item)->port_num);
@@ -779,6 +797,9 @@ static ssize_t f_acm_port_num_show(struct config_item *item, char *page)
 CONFIGFS_ATTR_RO(f_acm_, port_num);
 
 static struct configfs_attribute *acm_attrs[] = {
+#ifdef CONFIG_U_SERIAL_CONSOLE
+	&f_acm_attr_console,
+#endif
 	&f_acm_attr_port_num,
 	NULL,
 };

drivers/usb/gadget/function/f_obex.c

@@ -432,7 +432,7 @@ static struct usb_function_instance *obex_alloc_inst(void)
 		return ERR_PTR(-ENOMEM);
 
 	opts->func_inst.free_func_inst = obex_free_inst;
-	ret = gserial_alloc_line(&opts->port_num);
+	ret = gserial_alloc_line_no_console(&opts->port_num);
 	if (ret) {
 		kfree(opts);
 		return ERR_PTR(ret);

drivers/usb/gadget/function/f_serial.c

@@ -266,6 +266,24 @@ static struct configfs_item_operations serial_item_ops = {
 	.release	= serial_attr_release,
 };
 
+#ifdef CONFIG_U_SERIAL_CONSOLE
+
+static ssize_t f_serial_console_store(struct config_item *item,
+		const char *page, size_t count)
+{
+	return gserial_set_console(to_f_serial_opts(item)->port_num,
+				   page, count);
+}
+
+static ssize_t f_serial_console_show(struct config_item *item, char *page)
+{
+	return gserial_get_console(to_f_serial_opts(item)->port_num, page);
+}
+
+CONFIGFS_ATTR(f_serial_, console);
+
+#endif /* CONFIG_U_SERIAL_CONSOLE */
+
 static ssize_t f_serial_port_num_show(struct config_item *item, char *page)
 {
 	return sprintf(page, "%u\n", to_f_serial_opts(item)->port_num);
@@ -274,6 +292,9 @@ static ssize_t f_serial_port_num_show(struct config_item *item, char *page)
 CONFIGFS_ATTR_RO(f_serial_, port_num);
 
 static struct configfs_attribute *acm_attrs[] = {
+#ifdef CONFIG_U_SERIAL_CONSOLE
+	&f_serial_attr_console,
+#endif
 	&f_serial_attr_port_num,
 	NULL,
 };

drivers/usb/gadget/function/f_tcm.c

@@ -846,7 +846,7 @@ static void uasp_set_alt(struct f_uas *fu)
 
 	fu->flags = USBG_IS_UAS;
 
-	if (gadget->speed == USB_SPEED_SUPER)
+	if (gadget->speed >= USB_SPEED_SUPER)
 		fu->flags |= USBG_USE_STREAMS;
 
 	config_ep_by_speed(gadget, f, fu->ep_in);
@@ -2093,6 +2093,16 @@ static void tcm_delayed_set_alt(struct work_struct *wq)
 	usb_composite_setup_continue(fu->function.config->cdev);
 }
 
+static int tcm_get_alt(struct usb_function *f, unsigned intf)
+{
+	if (intf == bot_intf_desc.bInterfaceNumber)
+		return USB_G_ALT_INT_BBB;
+	if (intf == uasp_intf_desc.bInterfaceNumber)
+		return USB_G_ALT_INT_UAS;
+
+	return -EOPNOTSUPP;
+}
+
 static int tcm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 {
 	struct f_uas *fu = to_f_uas(f);
@@ -2300,6 +2310,7 @@ static struct usb_function *tcm_alloc(struct usb_function_instance *fi)
 	fu->function.bind = tcm_bind;
 	fu->function.unbind = tcm_unbind;
 	fu->function.set_alt = tcm_set_alt;
+	fu->function.get_alt = tcm_get_alt;
 	fu->function.setup = tcm_setup;
 	fu->function.disable = tcm_disable;
 	fu->function.free_func = tcm_free;

drivers/usb/gadget/function/u_serial.h

@@ -54,9 +54,17 @@ struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t flags);
 void gs_free_req(struct usb_ep *, struct usb_request *req);
 
 /* management of individual TTY ports */
+int gserial_alloc_line_no_console(unsigned char *port_line);
 int gserial_alloc_line(unsigned char *port_line);
 void gserial_free_line(unsigned char port_line);
 
+#ifdef CONFIG_U_SERIAL_CONSOLE
+
+ssize_t gserial_set_console(unsigned char port_num, const char *page, size_t count);
+ssize_t gserial_get_console(unsigned char port_num, char *page);
+
+#endif /* CONFIG_U_SERIAL_CONSOLE */
+
 /* connect/disconnect is handled by individual functions */
 int gserial_connect(struct gserial *, u8 port_num);
 void gserial_disconnect(struct gserial *);

drivers/usb/gadget/legacy/serial.c

@@ -97,6 +97,36 @@ static unsigned n_ports = 1;
 module_param(n_ports, uint, 0);
 MODULE_PARM_DESC(n_ports, "number of ports to create, default=1");
 
+static bool enable = true;
+
+static int switch_gserial_enable(bool do_enable);
+
+static int enable_set(const char *s, const struct kernel_param *kp)
+{
+	bool do_enable;
+	int ret;
+
+	if (!s)	/* called for no-arg enable == default */
+		return 0;
+
+	ret = strtobool(s, &do_enable);
+	if (ret || enable == do_enable)
+		return ret;
+
+	ret = switch_gserial_enable(do_enable);
+	if (!ret)
+		enable = do_enable;
+
+	return ret;
+}
+
+static const struct kernel_param_ops enable_ops = {
+	.set = enable_set,
+	.get = param_get_bool,
+};
+
+module_param_cb(enable, &enable_ops, &enable, 0644);
+
 /*-------------------------------------------------------------------------*/
 
 static struct usb_configuration serial_config_driver = {
@@ -240,6 +270,19 @@ static struct usb_composite_driver gserial_driver = {
 	.unbind		= gs_unbind,
 };
 
+static int switch_gserial_enable(bool do_enable)
+{
+	if (!serial_config_driver.label)
+		/* init() was not called, yet */
+		return 0;
+
+	if (do_enable)
+		return usb_composite_probe(&gserial_driver);
+
+	usb_composite_unregister(&gserial_driver);
+	return 0;
+}
+
 static int __init init(void)
 {
 	/* We *could* export two configs; that'd be much cleaner...
@@ -266,12 +309,16 @@ static int __init init(void)
 	}
 	strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label;
 
+	if (!enable)
+		return 0;
+
 	return usb_composite_probe(&gserial_driver);
 }
 module_init(init);
 
 static void __exit cleanup(void)
 {
+	if (enable)
 		usb_composite_unregister(&gserial_driver);
 }
 module_exit(cleanup);

drivers/usb/gadget/udc/Kconfig

@@ -441,6 +441,17 @@ config USB_GADGET_XILINX
 	  dynamically linked module called "udc-xilinx" and force all
 	  gadget drivers to also be dynamically linked.
 
+config USB_TEGRA_XUDC
+	tristate "NVIDIA Tegra Superspeed USB 3.0 Device Controller"
+	depends on ARCH_TEGRA || COMPILE_TEST
+	depends on PHY_TEGRA_XUSB
+	help
+	 Enables NVIDIA Tegra USB 3.0 device mode controller driver.
+
+	 Say "y" to link the driver statically, or "m" to build a
+	 dynamically linked module called "tegra_xudc" and force all
+	 gadget drivers to also be dynamically linked.
+
 source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig"
 
 #

drivers/usb/gadget/udc/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_USB_BCM63XX_UDC)	+= bcm63xx_udc.o
 obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
 fsl_usb2_udc-y			:= fsl_udc_core.o
 fsl_usb2_udc-$(CONFIG_ARCH_MXC)	+= fsl_mxc_udc.o
+obj-$(CONFIG_USB_TEGRA_XUDC)	+= tegra-xudc.o
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
 obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
 obj-$(CONFIG_USB_RENESAS_USB3)	+= renesas_usb3.o

drivers/usb/gadget/udc/fsl_udc_core.c

@@ -1052,10 +1052,11 @@ static int fsl_ep_fifo_status(struct usb_ep *_ep)
 	u32 bitmask;
 	struct ep_queue_head *qh;
 
-	ep = container_of(_ep, struct fsl_ep, ep);
-	if (!_ep || (!ep->ep.desc && ep_index(ep) != 0))
+	if (!_ep || _ep->desc || !(_ep->desc->bEndpointAddress&0xF))
 		return -ENODEV;
 
+	ep = container_of(_ep, struct fsl_ep, ep);
+
 	udc = (struct fsl_udc *)ep->udc;
 
 	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
@@ -1595,14 +1596,13 @@ static int process_ep_req(struct fsl_udc *udc, int pipe,
 		struct fsl_req *curr_req)
 {
 	struct ep_td_struct *curr_td;
-	int	td_complete, actual, remaining_length, j, tmp;
+	int	actual, remaining_length, j, tmp;
 	int	status = 0;
 	int	errors = 0;
 	struct  ep_queue_head *curr_qh = &udc->ep_qh[pipe];
 	int direction = pipe % 2;
 
 	curr_td = curr_req->head;
-	td_complete = 0;
 	actual = curr_req->req.length;
 
 	for (j = 0; j < curr_req->dtd_count; j++) {
@@ -1647,11 +1647,9 @@ static int process_ep_req(struct fsl_udc *udc, int pipe,
 				status = -EPROTO;
 				break;
 			} else {
-				td_complete++;
 				break;
 			}
 		} else {
-			td_complete++;
 			VDBG("dTD transmitted successful");
 		}
 

drivers/usb/gadget/udc/lpc32xx_udc.c

@@ -3000,7 +3000,6 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct lpc32xx_udc *udc;
 	int retval, i;
-	struct resource *res;
 	dma_addr_t dma_handle;
 	struct device_node *isp1301_node;
 
@@ -3048,9 +3047,6 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
 	 *  IORESOURCE_IRQ, USB device interrupt number
 	 *  IORESOURCE_IRQ, USB transceiver interrupt number
 	 */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENXIO;
 
 	spin_lock_init(&udc->lock);
 
@@ -3061,7 +3057,7 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
 			return udc->udp_irq[i];
 	}
 
-	udc->udp_baseaddr = devm_ioremap_resource(dev, res);
+	udc->udp_baseaddr = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(udc->udp_baseaddr)) {
 		dev_err(udc->dev, "IO map failure\n");
 		return PTR_ERR(udc->udp_baseaddr);

drivers/usb/gadget/udc/renesas_usb3.c

@@ -775,6 +775,18 @@ static void usb3_irq_epc_int_1_resume(struct renesas_usb3 *usb3)
 	usb3_transition_to_default_state(usb3, false);
 }
 
+static void usb3_irq_epc_int_1_suspend(struct renesas_usb3 *usb3)
+{
+	usb3_disable_irq_1(usb3, USB_INT_1_B2_SPND);
+
+	if (usb3->gadget.speed != USB_SPEED_UNKNOWN &&
+	    usb3->gadget.state != USB_STATE_NOTATTACHED) {
+		if (usb3->driver && usb3->driver->suspend)
+			usb3->driver->suspend(&usb3->gadget);
+		usb_gadget_set_state(&usb3->gadget, USB_STATE_SUSPENDED);
+	}
+}
+
 static void usb3_irq_epc_int_1_disable(struct renesas_usb3 *usb3)
 {
 	usb3_stop_usb3_connection(usb3);
@@ -860,6 +872,9 @@ static void usb3_irq_epc_int_1(struct renesas_usb3 *usb3, u32 int_sta_1)
 	if (int_sta_1 & USB_INT_1_B2_RSUM)
 		usb3_irq_epc_int_1_resume(usb3);
 
+	if (int_sta_1 & USB_INT_1_B2_SPND)
+		usb3_irq_epc_int_1_suspend(usb3);
+
 	if (int_sta_1 & USB_INT_1_SPEED)
 		usb3_irq_epc_int_1_speed(usb3);