Commit 71812af7 authored by David S. Miller's avatar David S. Miller

Merge branch 'mctp-i2c-driver'

Matt Johnston says:

====================
MCTP I2C driver

This patch series adds a netdev driver providing MCTP transport over
I2C.

It applies against net-next using recent MCTP changes there, though also
has I2C core changes for review. I'll leave it to maintainers where it
should be applied - please let me know if it needs to be submitted
differently.

The I2C patches were previously sent as RFC though the only feedback
there was an ack to 255 bytes for aspeed.

The dt-bindings patch went through review on the list.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents cc0be1ad 80be9b2c
......@@ -95,6 +95,10 @@ wants to support one of the below features, it should adapt these bindings.
- smbus-alert
states that the optional SMBus-Alert feature apply to this bus.
- mctp-controller
indicates that the system is accessible via this bus as an endpoint for
MCTP over I2C transport.
Required properties (per child device)
--------------------------------------
......
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/mctp-i2c-controller.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MCTP I2C transport binding
maintainers:
- Matt Johnston <matt@codeconstruct.com.au>
description: |
An mctp-i2c-controller defines a local MCTP endpoint on an I2C controller.
MCTP I2C is specified by DMTF DSP0237.
An mctp-i2c-controller must be attached to an I2C adapter which supports
slave functionality. I2C busses (either directly or as subordinate mux
busses) are attached to the mctp-i2c-controller with a 'mctp-controller'
property on each used bus. Each mctp-controller I2C bus will be presented
to the host system as a separate MCTP I2C instance.
properties:
compatible:
const: mctp-i2c-controller
reg:
minimum: 0x40000000
maximum: 0x4000007f
description: |
7 bit I2C address of the local endpoint.
I2C_OWN_SLAVE_ADDRESS (1<<30) flag must be set.
additionalProperties: false
required:
- compatible
- reg
examples:
- |
// Basic case of a single I2C bus
#include <dt-bindings/i2c/i2c.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
mctp-controller;
mctp@30 {
compatible = "mctp-i2c-controller";
reg = <(0x30 | I2C_OWN_SLAVE_ADDRESS)>;
};
};
- |
// Mux topology with multiple MCTP-handling busses under
// a single mctp-i2c-controller.
// i2c1 and i2c6 can have MCTP devices, i2c5 does not.
#include <dt-bindings/i2c/i2c.h>
i2c1: i2c {
#address-cells = <1>;
#size-cells = <0>;
mctp-controller;
mctp@50 {
compatible = "mctp-i2c-controller";
reg = <(0x50 | I2C_OWN_SLAVE_ADDRESS)>;
};
};
i2c-mux {
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c1>;
i2c5: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
eeprom@33 {
reg = <0x33>;
};
};
i2c6: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
mctp-controller;
};
};
......@@ -533,7 +533,7 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
msg->buf[bus->buf_index++] = recv_byte;
if (msg->flags & I2C_M_RECV_LEN) {
if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) {
if (unlikely(recv_byte > I2C_SMBUS_V3_BLOCK_MAX)) {
bus->cmd_err = -EPROTO;
aspeed_i2c_do_stop(bus);
goto out_no_complete;
......@@ -718,7 +718,8 @@ static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_V3_BLOCK;
}
#if IS_ENABLED(CONFIG_I2C_SLAVE)
......
......@@ -1399,7 +1399,7 @@ static void npcm_i2c_irq_master_handler_read(struct npcm_i2c *bus)
if (bus->read_block_use) {
/* first byte in block protocol is the size: */
data = npcm_i2c_rd_byte(bus);
data = clamp_val(data, 1, I2C_SMBUS_BLOCK_MAX);
data = clamp_val(data, 1, I2C_SMBUS_V3_BLOCK_MAX);
bus->rd_size = data + block_extra_bytes_size;
bus->rd_buf[bus->rd_ind++] = data;
......@@ -2187,6 +2187,7 @@ static u32 npcm_i2c_functionality(struct i2c_adapter *adap)
I2C_FUNC_SMBUS_EMUL |
I2C_FUNC_SMBUS_BLOCK_DATA |
I2C_FUNC_SMBUS_PEC |
I2C_FUNC_SMBUS_V3_BLOCK |
I2C_FUNC_SLAVE;
}
......
......@@ -303,7 +303,8 @@ static void i2c_smbus_try_get_dmabuf(struct i2c_msg *msg, u8 init_val)
bool is_read = msg->flags & I2C_M_RD;
unsigned char *dma_buf;
dma_buf = kzalloc(I2C_SMBUS_BLOCK_MAX + (is_read ? 2 : 3), GFP_KERNEL);
dma_buf = kzalloc(I2C_SMBUS_V3_BLOCK_MAX + (is_read ? 2 : 3),
GFP_KERNEL);
if (!dma_buf)
return;
......@@ -329,9 +330,10 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
* initialize most things with sane defaults, to keep the code below
* somewhat simpler.
*/
unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
unsigned char msgbuf0[I2C_SMBUS_V3_BLOCK_MAX+3];
unsigned char msgbuf1[I2C_SMBUS_V3_BLOCK_MAX+2];
int nmsgs = read_write == I2C_SMBUS_READ ? 2 : 1;
u16 block_max;
u8 partial_pec = 0;
int status;
struct i2c_msg msg[2] = {
......@@ -350,6 +352,10 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
bool wants_pec = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK
&& size != I2C_SMBUS_I2C_BLOCK_DATA);
/* Drivers must opt in to 255 byte max block size */
block_max = i2c_check_functionality(adapter, I2C_FUNC_SMBUS_V3_BLOCK)
? I2C_SMBUS_V3_BLOCK_MAX : I2C_SMBUS_BLOCK_MAX;
msgbuf0[0] = command;
switch (size) {
case I2C_SMBUS_QUICK:
......@@ -399,7 +405,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
i2c_smbus_try_get_dmabuf(&msg[1], 0);
} else {
msg[0].len = data->block[0] + 2;
if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) {
if (msg[0].len > block_max + 2) {
dev_err(&adapter->dev,
"Invalid block write size %d\n",
data->block[0]);
......@@ -413,7 +419,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
case I2C_SMBUS_BLOCK_PROC_CALL:
nmsgs = 2; /* Another special case */
read_write = I2C_SMBUS_READ;
if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
if (data->block[0] > block_max) {
dev_err(&adapter->dev,
"Invalid block write size %d\n",
data->block[0]);
......@@ -430,7 +436,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
i2c_smbus_try_get_dmabuf(&msg[1], 0);
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
if (data->block[0] > block_max) {
dev_err(&adapter->dev, "Invalid block %s size %d\n",
read_write == I2C_SMBUS_READ ? "read" : "write",
data->block[0]);
......@@ -498,7 +504,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
break;
case I2C_SMBUS_BLOCK_DATA:
case I2C_SMBUS_BLOCK_PROC_CALL:
if (msg[1].buf[0] > I2C_SMBUS_BLOCK_MAX) {
if (msg[1].buf[0] > block_max) {
dev_err(&adapter->dev,
"Invalid block size returned: %d\n",
msg[1].buf[0]);
......
......@@ -46,6 +46,24 @@ struct i2c_dev {
struct cdev cdev;
};
/* The userspace union i2c_smbus_data for I2C_SMBUS ioctl is limited
* to 32 bytes (I2C_SMBUS_BLOCK_MAX) for compatibility.
*/
union compat_i2c_smbus_data {
__u8 byte;
__u16 word;
__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
/* and one more for user-space compatibility */
};
/* Must match i2c-dev.h definition with compat .data member */
struct i2c_smbus_ioctl_data {
__u8 read_write;
__u8 command;
__u32 size;
union compat_i2c_smbus_data __user *data;
};
#define I2C_MINORS (MINORMASK + 1)
static LIST_HEAD(i2c_dev_list);
static DEFINE_SPINLOCK(i2c_dev_list_lock);
......@@ -235,14 +253,17 @@ static int i2cdev_check_addr(struct i2c_adapter *adapter, unsigned int addr)
static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client,
unsigned nmsgs, struct i2c_msg *msgs)
{
u8 __user **data_ptrs;
u8 __user **data_ptrs = NULL;
u16 *orig_lens = NULL;
int i, res;
res = -ENOMEM;
data_ptrs = kmalloc_array(nmsgs, sizeof(u8 __user *), GFP_KERNEL);
if (data_ptrs == NULL) {
kfree(msgs);
return -ENOMEM;
}
if (data_ptrs == NULL)
goto out;
orig_lens = kmalloc_array(nmsgs, sizeof(u16), GFP_KERNEL);
if (orig_lens == NULL)
goto out;
res = 0;
for (i = 0; i < nmsgs; i++) {
......@@ -253,12 +274,30 @@ static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client,
}
data_ptrs[i] = (u8 __user *)msgs[i].buf;
msgs[i].buf = memdup_user(data_ptrs[i], msgs[i].len);
msgs[i].buf = NULL;
if (msgs[i].len < 1) {
/* Sanity check */
res = -EINVAL;
break;
}
/* Allocate a larger buffer to accommodate possible 255 byte
* blocks. Read results will be dropped later
* if they are too large for the original length.
*/
orig_lens[i] = msgs[i].len;
msgs[i].buf = kmalloc(msgs[i].len + I2C_SMBUS_V3_BLOCK_MAX,
GFP_USER | __GFP_NOWARN);
if (IS_ERR(msgs[i].buf)) {
res = PTR_ERR(msgs[i].buf);
break;
}
/* memdup_user allocates with GFP_KERNEL, so DMA is ok */
if (copy_from_user(msgs[i].buf, data_ptrs[i], msgs[i].len)) {
kfree(msgs[i].buf);
res = -EFAULT;
break;
}
/* Buffer from kmalloc, so DMA is ok */
msgs[i].flags |= I2C_M_DMA_SAFE;
/*
......@@ -274,7 +313,7 @@ static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client,
*/
if (msgs[i].flags & I2C_M_RECV_LEN) {
if (!(msgs[i].flags & I2C_M_RD) ||
msgs[i].len < 1 || msgs[i].buf[0] < 1 ||
msgs[i].buf[0] < 1 ||
msgs[i].len < msgs[i].buf[0] +
I2C_SMBUS_BLOCK_MAX) {
i++;
......@@ -297,12 +336,16 @@ static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client,
res = i2c_transfer(client->adapter, msgs, nmsgs);
while (i-- > 0) {
if (res >= 0 && (msgs[i].flags & I2C_M_RD)) {
if (copy_to_user(data_ptrs[i], msgs[i].buf,
msgs[i].len))
if (orig_lens[i] < msgs[i].len)
res = -EINVAL;
else if (copy_to_user(data_ptrs[i], msgs[i].buf,
msgs[i].len))
res = -EFAULT;
}
kfree(msgs[i].buf);
}
out:
kfree(orig_lens);
kfree(data_ptrs);
kfree(msgs);
return res;
......@@ -310,7 +353,7 @@ static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client,
static noinline int i2cdev_ioctl_smbus(struct i2c_client *client,
u8 read_write, u8 command, u32 size,
union i2c_smbus_data __user *data)
union compat_i2c_smbus_data __user *data)
{
union i2c_smbus_data temp = {};
int datasize, res;
......@@ -371,6 +414,16 @@ static noinline int i2cdev_ioctl_smbus(struct i2c_client *client,
if (copy_from_user(&temp, data, datasize))
return -EFAULT;
}
if ((size == I2C_SMBUS_BLOCK_PROC_CALL ||
size == I2C_SMBUS_I2C_BLOCK_DATA ||
size == I2C_SMBUS_BLOCK_DATA) &&
read_write == I2C_SMBUS_WRITE &&
temp.block[0] > I2C_SMBUS_BLOCK_MAX) {
/* Don't accept writes larger than the buffer size */
dev_dbg(&client->adapter->dev, "block write is too large");
return -EINVAL;
}
if (size == I2C_SMBUS_I2C_BLOCK_BROKEN) {
/* Convert old I2C block commands to the new
convention. This preserves binary compatibility. */
......@@ -380,9 +433,21 @@ static noinline int i2cdev_ioctl_smbus(struct i2c_client *client,
}
res = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
read_write, command, size, &temp);
if (!res && ((size == I2C_SMBUS_PROC_CALL) ||
(size == I2C_SMBUS_BLOCK_PROC_CALL) ||
(read_write == I2C_SMBUS_READ))) {
if (res)
return res;
if ((size == I2C_SMBUS_BLOCK_PROC_CALL ||
size == I2C_SMBUS_I2C_BLOCK_DATA ||
size == I2C_SMBUS_BLOCK_DATA) &&
read_write == I2C_SMBUS_READ &&
temp.block[0] > I2C_SMBUS_BLOCK_MAX) {
/* Don't accept reads larger than the buffer size */
dev_dbg(&client->adapter->dev, "block read is too large");
return -EINVAL;
}
if ((size == I2C_SMBUS_PROC_CALL) ||
(size == I2C_SMBUS_BLOCK_PROC_CALL) ||
(read_write == I2C_SMBUS_READ)) {
if (copy_to_user(data, &temp, datasize))
return -EFAULT;
}
......
......@@ -3,6 +3,18 @@ if MCTP
menu "MCTP Device Drivers"
config MCTP_TRANSPORT_I2C
tristate "MCTP SMBus/I2C transport"
# i2c-mux is optional, but we must build as a module if i2c-mux is a module
depends on I2C_MUX || !I2C_MUX
depends on I2C
depends on I2C_SLAVE
select MCTP_FLOWS
help
Provides a driver to access MCTP devices over SMBus/I2C transport,
from DMTF specification DSP0237. A MCTP protocol network device is
created for each I2C bus that has been assigned a mctp-i2c device.
endmenu
endif
obj-$(CONFIG_MCTP_TRANSPORT_I2C) += mctp-i2c.o
// SPDX-License-Identifier: GPL-2.0
/*
* Management Controller Transport Protocol (MCTP)
*
* Copyright (c) 2021 Code Construct
* Copyright (c) 2021 Google
*/
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
#include <linux/if_arp.h>
#include <net/mctp.h>
#include <net/mctpdevice.h>
/* SMBus 3.0 allows 255 data bytes (plus PEC), but the
* first byte is taken for source slave address.
*/
#define MCTP_I2C_MAXBLOCK 255
#define MCTP_I2C_MAXMTU (MCTP_I2C_MAXBLOCK - 1)
#define MCTP_I2C_MINMTU (64 + 4)
/* Allow space for address, command, byte_count, databytes, PEC */
#define MCTP_I2C_RXBUFSZ (3 + MCTP_I2C_MAXBLOCK + 1)
#define MCTP_I2C_MINLEN 8
#define MCTP_I2C_COMMANDCODE 0x0f
#define MCTP_I2C_TX_WORK_LEN 100
// sufficient for 64kB at min mtu
#define MCTP_I2C_TX_QUEUE_LEN 1100
#define MCTP_I2C_OF_PROP "mctp-controller"
enum {
MCTP_I2C_FLOW_STATE_NEW = 0,
MCTP_I2C_FLOW_STATE_ACTIVE,
};
static struct {
/* lock protects clients and also prevents adding/removing adapters
* during mctp_i2c_client probe/remove.
*/
struct mutex lock;
// list of struct mctp_i2c_client
struct list_head clients;
} mi_driver_state;
struct mctp_i2c_client;
// The netdev structure. One of these per I2C adapter.
struct mctp_i2c_dev {
struct net_device *ndev;
struct i2c_adapter *adapter;
struct mctp_i2c_client *client;
struct list_head list; // for mctp_i2c_client.devs
size_t pos;
u8 buffer[MCTP_I2C_RXBUFSZ];
struct task_struct *tx_thread;
wait_queue_head_t tx_wq;
struct sk_buff_head tx_queue;
// a fake entry in our tx queue to perform an unlock operation
struct sk_buff unlock_marker;
spinlock_t flow_lock; // protects i2c_lock_count and release_count
int i2c_lock_count;
int release_count;
};
/* The i2c client structure. One per hardware i2c bus at the top of the
* mux tree, shared by multiple netdevs
*/
struct mctp_i2c_client {
struct i2c_client *client;
u8 lladdr;
struct mctp_i2c_dev *sel;
struct list_head devs;
spinlock_t curr_lock; // protects sel
struct list_head list; // for mi_driver_state.clients
};
// Header on the wire
struct mctp_i2c_hdr {
u8 dest_slave;
u8 command;
u8 byte_count;
u8 source_slave;
};
static int mctp_i2c_recv(struct mctp_i2c_dev *midev);
static int mctp_i2c_slave_cb(struct i2c_client *client,
enum i2c_slave_event event, u8 *val);
static struct i2c_adapter *mux_root_adapter(struct i2c_adapter *adap)
{
#if IS_ENABLED(CONFIG_I2C_MUX)
return i2c_root_adapter(&adap->dev);
#else
/* In non-mux config all i2c adapters are root adapters */
return adap;
#endif
}
static ssize_t mctp_current_mux_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct mctp_i2c_client *mcli = i2c_get_clientdata(to_i2c_client(dev));
struct net_device *ndev = NULL;
unsigned long flags;
ssize_t l;
spin_lock_irqsave(&mcli->curr_lock, flags);
if (mcli->sel) {
ndev = mcli->sel->ndev;
dev_hold(ndev);
}
spin_unlock_irqrestore(&mcli->curr_lock, flags);
l = scnprintf(buf, PAGE_SIZE, "%s\n", ndev ? ndev->name : "(none)");
if (ndev)
dev_put(ndev);
return l;
}
static DEVICE_ATTR_RO(mctp_current_mux);
/* Creates a new i2c slave device attached to the root adapter.
* Sets up the slave callback.
* Must be called with a client on a root adapter.
*/
static struct mctp_i2c_client *mctp_i2c_new_client(struct i2c_client *client)
{
struct mctp_i2c_client *mcli = NULL;
struct i2c_adapter *root = NULL;
int rc;
if (client->flags & I2C_CLIENT_TEN) {
dev_err(&client->dev, "%s failed, MCTP requires a 7-bit I2C address, addr=0x%x",
__func__, client->addr);
rc = -EINVAL;
goto err;
}
root = mux_root_adapter(client->adapter);
if (!root) {
dev_err(&client->dev, "%s failed to find root adapter\n", __func__);
rc = -ENOENT;
goto err;
}
if (root != client->adapter) {
dev_err(&client->dev,
"A mctp-i2c-controller client cannot be placed on an I2C mux adapter.\n"
" It should be placed on the mux tree root adapter\n"
" then set mctp-controller property on adapters to attach\n");
rc = -EINVAL;
goto err;
}
mcli = kzalloc(sizeof(*mcli), GFP_KERNEL);
if (!mcli) {
rc = -ENOMEM;
goto err;
}
spin_lock_init(&mcli->curr_lock);
INIT_LIST_HEAD(&mcli->devs);
INIT_LIST_HEAD(&mcli->list);
mcli->lladdr = client->addr & 0xff;
mcli->client = client;
i2c_set_clientdata(client, mcli);
rc = i2c_slave_register(mcli->client, mctp_i2c_slave_cb);
if (rc) {
dev_err(&client->dev, "%s i2c register failed %d\n", __func__, rc);
mcli->client = NULL;
i2c_set_clientdata(client, NULL);
goto err;
}
rc = device_create_file(&client->dev, &dev_attr_mctp_current_mux);
if (rc) {
dev_err(&client->dev, "%s adding sysfs \"%s\" failed %d\n", __func__,
dev_attr_mctp_current_mux.attr.name, rc);
// continue anyway
}
return mcli;
err:
if (mcli) {
if (mcli->client) {
device_remove_file(&mcli->client->dev, &dev_attr_mctp_current_mux);
i2c_unregister_device(mcli->client);
}
kfree(mcli);
}
return ERR_PTR(rc);
}
static void mctp_i2c_free_client(struct mctp_i2c_client *mcli)
{
int rc;
WARN_ON(!mutex_is_locked(&mi_driver_state.lock));
WARN_ON(!list_empty(&mcli->devs));
WARN_ON(mcli->sel); // sanity check, no locking
device_remove_file(&mcli->client->dev, &dev_attr_mctp_current_mux);
rc = i2c_slave_unregister(mcli->client);
// leak if it fails, we can't propagate errors upwards
if (rc)
dev_err(&mcli->client->dev, "%s i2c unregister failed %d\n", __func__, rc);
else
kfree(mcli);
}
/* Switch the mctp i2c device to receive responses.
* Call with curr_lock held
*/
static void __mctp_i2c_device_select(struct mctp_i2c_client *mcli,
struct mctp_i2c_dev *midev)
{
assert_spin_locked(&mcli->curr_lock);
if (midev)
dev_hold(midev->ndev);
if (mcli->sel)
dev_put(mcli->sel->ndev);
mcli->sel = midev;
}
// Switch the mctp i2c device to receive responses
static void mctp_i2c_device_select(struct mctp_i2c_client *mcli,
struct mctp_i2c_dev *midev)
{
unsigned long flags;
spin_lock_irqsave(&mcli->curr_lock, flags);
__mctp_i2c_device_select(mcli, midev);
spin_unlock_irqrestore(&mcli->curr_lock, flags);
}
static int mctp_i2c_slave_cb(struct i2c_client *client,
enum i2c_slave_event event, u8 *val)
{
struct mctp_i2c_client *mcli = i2c_get_clientdata(client);
struct mctp_i2c_dev *midev = NULL;
unsigned long flags;
int rc = 0;
spin_lock_irqsave(&mcli->curr_lock, flags);
midev = mcli->sel;
if (midev)
dev_hold(midev->ndev);
spin_unlock_irqrestore(&mcli->curr_lock, flags);
if (!midev)
return 0;
switch (event) {
case I2C_SLAVE_WRITE_RECEIVED:
if (midev->pos < MCTP_I2C_RXBUFSZ) {
midev->buffer[midev->pos] = *val;
midev->pos++;
} else {
midev->ndev->stats.rx_over_errors++;
}
break;
case I2C_SLAVE_WRITE_REQUESTED:
/* dest_slave as first byte */
midev->buffer[0] = mcli->lladdr << 1;
midev->pos = 1;
break;
case I2C_SLAVE_STOP:
rc = mctp_i2c_recv(midev);
break;
default:
break;
}
dev_put(midev->ndev);
return rc;
}
// Processes incoming data that has been accumulated by the slave cb
static int mctp_i2c_recv(struct mctp_i2c_dev *midev)
{
struct net_device *ndev = midev->ndev;
struct mctp_i2c_hdr *hdr;
struct mctp_skb_cb *cb;
struct sk_buff *skb;
u8 pec, calc_pec;
size_t recvlen;
/* + 1 for the PEC */
if (midev->pos < MCTP_I2C_MINLEN + 1) {
ndev->stats.rx_length_errors++;
return -EINVAL;
}
recvlen = midev->pos - 1;
hdr = (void *)midev->buffer;
if (hdr->command != MCTP_I2C_COMMANDCODE) {
ndev->stats.rx_dropped++;
return -EINVAL;
}
pec = midev->buffer[midev->pos - 1];
calc_pec = i2c_smbus_pec(0, midev->buffer, recvlen);
if (pec != calc_pec) {
ndev->stats.rx_crc_errors++;
return -EINVAL;
}
skb = netdev_alloc_skb(ndev, recvlen);
if (!skb) {
ndev->stats.rx_dropped++;
return -ENOMEM;
}
skb->protocol = htons(ETH_P_MCTP);
skb_put_data(skb, midev->buffer, recvlen);
skb_reset_mac_header(skb);
skb_pull(skb, sizeof(struct mctp_i2c_hdr));
skb_reset_network_header(skb);
cb = __mctp_cb(skb);
cb->halen = 1;
cb->haddr[0] = hdr->source_slave;
if (netif_rx(skb) == NET_RX_SUCCESS) {
ndev->stats.rx_packets++;
ndev->stats.rx_bytes += skb->len;
} else {
ndev->stats.rx_dropped++;
}
return 0;
}
enum mctp_i2c_flow_state {
MCTP_I2C_TX_FLOW_INVALID,
MCTP_I2C_TX_FLOW_NONE,
MCTP_I2C_TX_FLOW_NEW,
MCTP_I2C_TX_FLOW_EXISTING,
};
static enum mctp_i2c_flow_state
mctp_i2c_get_tx_flow_state(struct mctp_i2c_dev *midev, struct sk_buff *skb)
{
enum mctp_i2c_flow_state state;
struct mctp_sk_key *key;
struct mctp_flow *flow;
unsigned long flags;
flow = skb_ext_find(skb, SKB_EXT_MCTP);
if (!flow)
return MCTP_I2C_TX_FLOW_NONE;
key = flow->key;
if (!key)
return MCTP_I2C_TX_FLOW_NONE;
spin_lock_irqsave(&key->lock, flags);
/* if the key is present but invalid, we're unlikely to be able
* to handle the flow at all; just drop now
*/
if (!key->valid) {
state = MCTP_I2C_TX_FLOW_INVALID;
} else if (key->dev_flow_state == MCTP_I2C_FLOW_STATE_NEW) {
key->dev_flow_state = MCTP_I2C_FLOW_STATE_ACTIVE;
state = MCTP_I2C_TX_FLOW_NEW;
} else {
state = MCTP_I2C_TX_FLOW_EXISTING;
}
spin_unlock_irqrestore(&key->lock, flags);
return state;
}
/* We're not contending with ourselves here; we only need to exclude other
* i2c clients from using the bus. refcounts are simply to prevent
* recursive locking.
*/
static void mctp_i2c_lock_nest(struct mctp_i2c_dev *midev)
{
unsigned long flags;
bool lock;
spin_lock_irqsave(&midev->flow_lock, flags);
lock = midev->i2c_lock_count == 0;
midev->i2c_lock_count++;
spin_unlock_irqrestore(&midev->flow_lock, flags);
if (lock)
i2c_lock_bus(midev->adapter, I2C_LOCK_SEGMENT);
}
static void mctp_i2c_unlock_nest(struct mctp_i2c_dev *midev)
{
unsigned long flags;
bool unlock;
spin_lock_irqsave(&midev->flow_lock, flags);
if (!WARN_ONCE(midev->i2c_lock_count == 0, "lock count underflow!"))
midev->i2c_lock_count--;
unlock = midev->i2c_lock_count == 0;
spin_unlock_irqrestore(&midev->flow_lock, flags);
if (unlock)
i2c_unlock_bus(midev->adapter, I2C_LOCK_SEGMENT);
}
static void mctp_i2c_xmit(struct mctp_i2c_dev *midev, struct sk_buff *skb)
{
struct net_device_stats *stats = &midev->ndev->stats;
enum mctp_i2c_flow_state fs;
union i2c_smbus_data *data;
struct mctp_i2c_hdr *hdr;
unsigned int len;
u16 daddr;
int rc;
fs = mctp_i2c_get_tx_flow_state(midev, skb);
len = skb->len;
hdr = (void *)skb_mac_header(skb);
data = (void *)&hdr->byte_count;
daddr = hdr->dest_slave >> 1;
switch (fs) {
case MCTP_I2C_TX_FLOW_NONE:
/* no flow: full lock & unlock */
mctp_i2c_lock_nest(midev);
mctp_i2c_device_select(midev->client, midev);
rc = __i2c_smbus_xfer(midev->adapter, daddr, I2C_CLIENT_PEC,
I2C_SMBUS_WRITE, hdr->command,
I2C_SMBUS_BLOCK_DATA, data);
mctp_i2c_unlock_nest(midev);
break;
case MCTP_I2C_TX_FLOW_NEW:
/* new flow: lock, tx, but don't unlock; that will happen
* on flow release
*/
mctp_i2c_lock_nest(midev);
mctp_i2c_device_select(midev->client, midev);
fallthrough;
case MCTP_I2C_TX_FLOW_EXISTING:
/* existing flow: we already have the lock; just tx */
rc = __i2c_smbus_xfer(midev->adapter, daddr, I2C_CLIENT_PEC,
I2C_SMBUS_WRITE, hdr->command,
I2C_SMBUS_BLOCK_DATA, data);
break;
case MCTP_I2C_TX_FLOW_INVALID:
return;
}
if (rc) {
dev_warn_ratelimited(&midev->adapter->dev,
"%s i2c_smbus_xfer failed %d", __func__, rc);
stats->tx_errors++;
} else {
stats->tx_bytes += len;
stats->tx_packets++;
}
}
static void mctp_i2c_flow_release(struct mctp_i2c_dev *midev)
{
unsigned long flags;
bool unlock;
spin_lock_irqsave(&midev->flow_lock, flags);
if (midev->release_count > midev->i2c_lock_count) {
WARN_ONCE(1, "release count overflow");
midev->release_count = midev->i2c_lock_count;
}
midev->i2c_lock_count -= midev->release_count;
unlock = midev->i2c_lock_count == 0 && midev->release_count > 0;
midev->release_count = 0;
spin_unlock_irqrestore(&midev->flow_lock, flags);
if (unlock)
i2c_unlock_bus(midev->adapter, I2C_LOCK_SEGMENT);
}
static int mctp_i2c_header_create(struct sk_buff *skb, struct net_device *dev,
unsigned short type, const void *daddr,
const void *saddr, unsigned int len)
{
struct mctp_i2c_hdr *hdr;
struct mctp_hdr *mhdr;
u8 lldst, llsrc;
lldst = *((u8 *)daddr);
llsrc = *((u8 *)saddr);
skb_push(skb, sizeof(struct mctp_i2c_hdr));
skb_reset_mac_header(skb);
hdr = (void *)skb_mac_header(skb);
mhdr = mctp_hdr(skb);
hdr->dest_slave = (lldst << 1) & 0xff;
hdr->command = MCTP_I2C_COMMANDCODE;
hdr->byte_count = len + 1;
if (hdr->byte_count > MCTP_I2C_MAXBLOCK)
return -EMSGSIZE;
hdr->source_slave = ((llsrc << 1) & 0xff) | 0x01;
mhdr->ver = 0x01;
return 0;
}
static int mctp_i2c_tx_thread(void *data)
{
struct mctp_i2c_dev *midev = data;
struct sk_buff *skb;
unsigned long flags;
for (;;) {
if (kthread_should_stop())
break;
spin_lock_irqsave(&midev->tx_queue.lock, flags);
skb = __skb_dequeue(&midev->tx_queue);
if (netif_queue_stopped(midev->ndev))
netif_wake_queue(midev->ndev);
spin_unlock_irqrestore(&midev->tx_queue.lock, flags);
if (skb == &midev->unlock_marker) {
mctp_i2c_flow_release(midev);
} else if (skb) {
mctp_i2c_xmit(midev, skb);
kfree_skb(skb);
} else {
wait_event(midev->tx_wq,
!skb_queue_empty(&midev->tx_queue) ||
kthread_should_stop());
}
}
return 0;
}
static netdev_tx_t mctp_i2c_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct mctp_i2c_dev *midev = netdev_priv(dev);
unsigned long flags;
spin_lock_irqsave(&midev->tx_queue.lock, flags);
if (skb_queue_len(&midev->tx_queue) >= MCTP_I2C_TX_WORK_LEN) {
netif_stop_queue(dev);
spin_unlock_irqrestore(&midev->tx_queue.lock, flags);
netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
return NETDEV_TX_BUSY;
}
__skb_queue_tail(&midev->tx_queue, skb);
if (skb_queue_len(&midev->tx_queue) == MCTP_I2C_TX_WORK_LEN)
netif_stop_queue(dev);
spin_unlock_irqrestore(&midev->tx_queue.lock, flags);
wake_up(&midev->tx_wq);
return NETDEV_TX_OK;
}
static void mctp_i2c_release_flow(struct mctp_dev *mdev,
struct mctp_sk_key *key)
{
struct mctp_i2c_dev *midev = netdev_priv(mdev->dev);
unsigned long flags;
spin_lock_irqsave(&midev->flow_lock, flags);
midev->release_count++;
spin_unlock_irqrestore(&midev->flow_lock, flags);
/* Ensure we have a release operation queued, through the fake
* marker skb
*/
spin_lock(&midev->tx_queue.lock);
if (!midev->unlock_marker.next)
__skb_queue_tail(&midev->tx_queue, &midev->unlock_marker);
spin_unlock(&midev->tx_queue.lock);
wake_up(&midev->tx_wq);
}
static const struct net_device_ops mctp_i2c_ops = {
.ndo_start_xmit = mctp_i2c_start_xmit,
};
static const struct header_ops mctp_i2c_headops = {
.create = mctp_i2c_header_create,
};
static const struct mctp_netdev_ops mctp_i2c_mctp_ops = {
.release_flow = mctp_i2c_release_flow,
};
static void mctp_i2c_net_setup(struct net_device *dev)
{
dev->type = ARPHRD_MCTP;
dev->mtu = MCTP_I2C_MAXMTU;
dev->min_mtu = MCTP_I2C_MINMTU;
dev->max_mtu = MCTP_I2C_MAXMTU;
dev->tx_queue_len = MCTP_I2C_TX_QUEUE_LEN;
dev->hard_header_len = sizeof(struct mctp_i2c_hdr);
dev->addr_len = 1;
dev->netdev_ops = &mctp_i2c_ops;
dev->header_ops = &mctp_i2c_headops;
dev->needs_free_netdev = true;
}
static int mctp_i2c_add_netdev(struct mctp_i2c_client *mcli,
struct i2c_adapter *adap)
{
unsigned long flags;
struct mctp_i2c_dev *midev = NULL;
struct net_device *ndev = NULL;
struct i2c_adapter *root;
char namebuf[30];
int rc;
root = mux_root_adapter(adap);
if (root != mcli->client->adapter) {
dev_err(&mcli->client->dev,
"I2C adapter %s is not a child bus of %s",
mcli->client->adapter->name, root->name);
return -EINVAL;
}
WARN_ON(!mutex_is_locked(&mi_driver_state.lock));
snprintf(namebuf, sizeof(namebuf), "mctpi2c%d", adap->nr);
ndev = alloc_netdev(sizeof(*midev), namebuf, NET_NAME_ENUM, mctp_i2c_net_setup);
if (!ndev) {
dev_err(&mcli->client->dev, "%s alloc netdev failed\n", __func__);
rc = -ENOMEM;
goto err;
}
dev_net_set(ndev, current->nsproxy->net_ns);
SET_NETDEV_DEV(ndev, &adap->dev);
ndev->dev_addr = &mcli->lladdr;
midev = netdev_priv(ndev);
skb_queue_head_init(&midev->tx_queue);
INIT_LIST_HEAD(&midev->list);
midev->adapter = adap;
midev->client = mcli;
spin_lock_init(&midev->flow_lock);
midev->i2c_lock_count = 0;
midev->release_count = 0;
/* Hold references */
get_device(&midev->adapter->dev);
get_device(&midev->client->client->dev);
midev->ndev = ndev;
init_waitqueue_head(&midev->tx_wq);
midev->tx_thread = kthread_create(mctp_i2c_tx_thread, midev,
"%s/tx", namebuf);
if (IS_ERR_OR_NULL(midev->tx_thread)) {
rc = -ENOMEM;
goto err_free;
}
rc = mctp_register_netdev(ndev, &mctp_i2c_mctp_ops);
if (rc) {
dev_err(&mcli->client->dev,
"%s register netdev \"%s\" failed %d\n", __func__,
ndev->name, rc);
goto err_stop_kthread;
}
spin_lock_irqsave(&mcli->curr_lock, flags);
list_add(&midev->list, &mcli->devs);
// Select a device by default
if (!mcli->sel)
__mctp_i2c_device_select(mcli, midev);
spin_unlock_irqrestore(&mcli->curr_lock, flags);
wake_up_process(midev->tx_thread);
return 0;
err_stop_kthread:
kthread_stop(midev->tx_thread);
err_free:
free_netdev(ndev);
err:
return rc;
}
// Removes and unregisters a mctp-i2c netdev
static void mctp_i2c_free_netdev(struct mctp_i2c_dev *midev)
{
struct mctp_i2c_client *mcli = midev->client;
unsigned long flags;
netif_stop_queue(midev->ndev);
kthread_stop(midev->tx_thread);
skb_queue_purge(&midev->tx_queue);
/* Release references, used only for TX which has stopped */
put_device(&midev->adapter->dev);
put_device(&mcli->client->dev);
/* Remove it from the parent mcli */
spin_lock_irqsave(&mcli->curr_lock, flags);
list_del(&midev->list);
if (mcli->sel == midev) {
struct mctp_i2c_dev *first;
first = list_first_entry_or_null(&mcli->devs, struct mctp_i2c_dev, list);
__mctp_i2c_device_select(mcli, first);
}
spin_unlock_irqrestore(&mcli->curr_lock, flags);
/* Remove netdev. mctp_i2c_slave_cb() takes a dev_hold() so removing
* it now is safe. unregister_netdev() frees ndev and midev.
*/
mctp_unregister_netdev(midev->ndev);
}
// Removes any netdev for adap. mcli is the parent root i2c client
static void mctp_i2c_remove_netdev(struct mctp_i2c_client *mcli,
struct i2c_adapter *adap)
{
unsigned long flags;
struct mctp_i2c_dev *midev = NULL, *m = NULL;
WARN_ON(!mutex_is_locked(&mi_driver_state.lock));
spin_lock_irqsave(&mcli->curr_lock, flags);
// list size is limited by number of MCTP netdevs on a single hardware bus
list_for_each_entry(m, &mcli->devs, list)
if (m->adapter == adap) {
midev = m;
break;
}
spin_unlock_irqrestore(&mcli->curr_lock, flags);
if (midev)
mctp_i2c_free_netdev(midev);
}
/* Determines whether a device is an i2c adapter.
* Optionally returns the root i2c_adapter
*/
static struct i2c_adapter *mctp_i2c_get_adapter(struct device *dev,
struct i2c_adapter **ret_root)
{
struct i2c_adapter *root, *adap;
if (dev->type != &i2c_adapter_type)
return NULL;
adap = to_i2c_adapter(dev);
root = mux_root_adapter(adap);
WARN_ONCE(!root, "%s failed to find root adapter for %s\n",
__func__, dev_name(dev));
if (!root)
return NULL;
if (ret_root)
*ret_root = root;
return adap;
}
/* Determines whether a device is an i2c adapter with the "mctp-controller"
* devicetree property set. If adap is not an OF node, returns match_no_of
*/
static bool mctp_i2c_adapter_match(struct i2c_adapter *adap, bool match_no_of)
{
if (!adap->dev.of_node)
return match_no_of;
return of_property_read_bool(adap->dev.of_node, MCTP_I2C_OF_PROP);
}
/* Called for each existing i2c device (adapter or client) when a
* new mctp-i2c client is probed.
*/
static int mctp_i2c_client_try_attach(struct device *dev, void *data)
{
struct i2c_adapter *adap = NULL, *root = NULL;
struct mctp_i2c_client *mcli = data;
adap = mctp_i2c_get_adapter(dev, &root);
if (!adap)
return 0;
if (mcli->client->adapter != root)
return 0;
// Must either have mctp-controller property on the adapter, or
// be a root adapter if it's non-devicetree
if (!mctp_i2c_adapter_match(adap, adap == root))
return 0;
return mctp_i2c_add_netdev(mcli, adap);
}
static void mctp_i2c_notify_add(struct device *dev)
{
struct mctp_i2c_client *mcli = NULL, *m = NULL;
struct i2c_adapter *root = NULL, *adap = NULL;
int rc;
adap = mctp_i2c_get_adapter(dev, &root);
if (!adap)
return;
// Check for mctp-controller property on the adapter
if (!mctp_i2c_adapter_match(adap, false))
return;
/* Find an existing mcli for adap's root */
mutex_lock(&mi_driver_state.lock);
list_for_each_entry(m, &mi_driver_state.clients, list) {
if (m->client->adapter == root) {
mcli = m;
break;
}
}
if (mcli) {
rc = mctp_i2c_add_netdev(mcli, adap);
if (rc)
dev_warn(dev, "%s Failed adding mctp-i2c device",
__func__);
}
mutex_unlock(&mi_driver_state.lock);
}
static void mctp_i2c_notify_del(struct device *dev)
{
struct i2c_adapter *root = NULL, *adap = NULL;
struct mctp_i2c_client *mcli = NULL;
adap = mctp_i2c_get_adapter(dev, &root);
if (!adap)
return;
mutex_lock(&mi_driver_state.lock);
list_for_each_entry(mcli, &mi_driver_state.clients, list) {
if (mcli->client->adapter == root) {
mctp_i2c_remove_netdev(mcli, adap);
break;
}
}
mutex_unlock(&mi_driver_state.lock);
}
static int mctp_i2c_probe(struct i2c_client *client)
{
struct mctp_i2c_client *mcli = NULL;
int rc;
/* Check for >32 byte block support required for MCTP */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_V3_BLOCK)) {
dev_err(&client->dev,
"%s failed, I2C bus driver does not support 255 byte block transfer\n",
__func__);
return -EOPNOTSUPP;
}
mutex_lock(&mi_driver_state.lock);
mcli = mctp_i2c_new_client(client);
if (IS_ERR(mcli)) {
rc = PTR_ERR(mcli);
mcli = NULL;
goto out;
} else {
list_add(&mcli->list, &mi_driver_state.clients);
}
// Add a netdev for adapters that have a 'mctp-controller' property
i2c_for_each_dev(mcli, mctp_i2c_client_try_attach);
rc = 0;
out:
mutex_unlock(&mi_driver_state.lock);
return rc;
}
static int mctp_i2c_remove(struct i2c_client *client)
{
struct mctp_i2c_client *mcli = i2c_get_clientdata(client);
struct mctp_i2c_dev *midev = NULL, *tmp = NULL;
mutex_lock(&mi_driver_state.lock);
list_del(&mcli->list);
// Remove all child adapter netdevs
list_for_each_entry_safe(midev, tmp, &mcli->devs, list)
mctp_i2c_free_netdev(midev);
mctp_i2c_free_client(mcli);
mutex_unlock(&mi_driver_state.lock);
// Callers ignore return code
return 0;
}
/* We look for a 'mctp-controller' property on I2C busses as they are
* added/deleted, creating/removing netdevs as required.
*/
static int mctp_i2c_notifier_call(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
switch (action) {
case BUS_NOTIFY_ADD_DEVICE:
mctp_i2c_notify_add(dev);
break;
case BUS_NOTIFY_DEL_DEVICE:
mctp_i2c_notify_del(dev);
break;
}
return NOTIFY_DONE;
}
static struct notifier_block mctp_i2c_notifier = {
.notifier_call = mctp_i2c_notifier_call,
};
static const struct i2c_device_id mctp_i2c_id[] = {
{ "mctp-i2c", 0 },
{},
};
MODULE_DEVICE_TABLE(i2c, mctp_i2c_id);
static const struct of_device_id mctp_i2c_of_match[] = {
{ .compatible = "mctp-i2c-controller" },
{},
};
MODULE_DEVICE_TABLE(of, mctp_i2c_of_match);
static struct i2c_driver mctp_i2c_driver = {
.driver = {
.name = "mctp-i2c",
.of_match_table = mctp_i2c_of_match,
},
.probe_new = mctp_i2c_probe,
.remove = mctp_i2c_remove,
.id_table = mctp_i2c_id,
};
static __init int mctp_i2c_init(void)
{
int rc;
INIT_LIST_HEAD(&mi_driver_state.clients);
mutex_init(&mi_driver_state.lock);
pr_info("MCTP SMBus/I2C transport driver\n");
rc = i2c_add_driver(&mctp_i2c_driver);
if (rc)
return rc;
rc = bus_register_notifier(&i2c_bus_type, &mctp_i2c_notifier);
if (rc) {
i2c_del_driver(&mctp_i2c_driver);
return rc;
}
return 0;
}
static __exit void mctp_i2c_exit(void)
{
int rc;
rc = bus_unregister_notifier(&i2c_bus_type, &mctp_i2c_notifier);
if (rc)
pr_warn("%s Could not unregister notifier, %d", __func__, rc);
i2c_del_driver(&mctp_i2c_driver);
}
module_init(mctp_i2c_init);
module_exit(mctp_i2c_exit);
MODULE_DESCRIPTION("MCTP SMBus/I2C device");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Matt Johnston <matt@codeconstruct.com.au>");
......@@ -52,6 +52,19 @@ typedef int (*i2c_slave_cb_t)(struct i2c_client *client,
struct module;
struct property_entry;
/* SMBus 3.0 extends the maximum block read/write size to 255 (from 32).
* The larger size is only supported by some drivers, indicated by
* the I2C_FUNC_SMBUS_V3_BLOCK functionality bit.
*/
#define I2C_SMBUS_V3_BLOCK_MAX 255 /* As specified in SMBus 3.0 standard */
/* Note compatibility definition in uapi header with 32 byte block */
union i2c_smbus_data {
__u8 byte;
__u16 word;
__u8 block[I2C_SMBUS_V3_BLOCK_MAX + 1]; /* block[0] is used for length */
};
#if IS_ENABLED(CONFIG_I2C)
/* Return the Frequency mode string based on the bus frequency */
const char *i2c_freq_mode_string(u32 bus_freq_hz);
......
......@@ -39,12 +39,14 @@
/* This is the structure as used in the I2C_SMBUS ioctl call */
#ifndef __KERNEL__
struct i2c_smbus_ioctl_data {
__u8 read_write;
__u8 command;
__u32 size;
union i2c_smbus_data __user *data;
};
#endif
/* This is the structure as used in the I2C_RDWR ioctl call */
struct i2c_rdwr_ioctl_data {
......
......@@ -108,6 +108,9 @@ struct i2c_msg {
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
#define I2C_FUNC_SMBUS_HOST_NOTIFY 0x10000000 /* SMBus 2.0 or later */
#define I2C_FUNC_SMBUS_V3_BLOCK 0x20000000 /* Device supports 255 byte block */
/* Note that I2C_SMBUS ioctl only */
/* supports a 32 byte block */
#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
I2C_FUNC_SMBUS_WRITE_BYTE)
......@@ -137,13 +140,15 @@ struct i2c_msg {
/*
* Data for SMBus Messages
*/
#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus 2.0 standard */
#ifndef __KERNEL__
union i2c_smbus_data {
__u8 byte;
__u16 word;
__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
/* and one more for user-space compatibility */
};
#endif
/* i2c_smbus_xfer read or write markers */
#define I2C_SMBUS_READ 1
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment