Commit 719dbb2d authored by Michael Ellerman's avatar Michael Ellerman

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next

Freescale updates from Scott:

"Highlights include more 8xx optimizations, device tree updates,
and MVME7100 support."
parents fbef66f0 9f595fd8
......@@ -41,3 +41,84 @@ Example:
fsl,mdio-pin = <12>;
fsl,mdc-pin = <13>;
};
* HDLC
Currently defined compatibles:
- fsl,ucc-hdlc
Properties for fsl,ucc-hdlc:
- rx-clock-name
- tx-clock-name
Usage: required
Value type: <string>
Definition : Must be "brg1"-"brg16" for internal clock source,
Must be "clk1"-"clk24" for external clock source.
- fsl,tdm-interface
Usage: optional
Value type: <empty>
Definition : Specify that hdlc is based on tdm-interface
The property below is dependent on fsl,tdm-interface:
- fsl,rx-sync-clock
Usage: required
Value type: <string>
Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15".
- fsl,tx-sync-clock
Usage: required
Value type: <string>
Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15".
- fsl,tdm-framer-type
Usage: required for tdm interface
Value type: <string>
Definition : "e1" or "t1".Now e1 and t1 are used, other framer types
are not supported.
- fsl,tdm-id
Usage: required for tdm interface
Value type: <u32>
Definition : number of TDM ID
- fsl,tx-timeslot-mask
- fsl,rx-timeslot-mask
Usage: required for tdm interface
Value type: <u32>
Definition : time slot mask for TDM operation. Indicates which time
slots used for transmitting and receiving.
- fsl,siram-entry-id
Usage: required for tdm interface
Value type: <u32>
Definition : Must be 0,2,4...64. the number of TDM entry.
- fsl,tdm-internal-loopback
usage: optional for tdm interface
value type: <empty>
Definition : Internal loopback connecting on TDM layer.
Example for tdm interface:
ucc@2000 {
compatible = "fsl,ucc-hdlc";
rx-clock-name = "clk8";
tx-clock-name = "clk9";
fsl,rx-sync-clock = "rsync_pin";
fsl,tx-sync-clock = "tsync_pin";
fsl,tx-timeslot-mask = <0xfffffffe>;
fsl,rx-timeslot-mask = <0xfffffffe>;
fsl,tdm-framer-type = "e1";
fsl,tdm-id = <0>;
fsl,siram-entry-id = <0>;
fsl,tdm-interface;
};
Example for hdlc without tdm interface:
ucc@2000 {
compatible = "fsl,ucc-hdlc";
rx-clock-name = "brg1";
tx-clock-name = "brg1";
};
......@@ -69,6 +69,58 @@ Example:
};
};
* Interrupt Controller (IC)
Required properties:
- compatible : should be "fsl,qe-ic".
- reg : Address range of IC register set.
- interrupts : interrupts generated by the device.
- interrupt-controller : this device is a interrupt controller.
Example:
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <95 2 0 0 94 2 0 0>;
};
* Serial Interface Block (SI)
The SI manages the routing of eight TDM lines to the QE block serial drivers
, the MCC and the UCCs, for receive and transmit.
Required properties:
- compatible : must be "fsl,<chip>-qe-si". For t1040, must contain
"fsl,t1040-qe-si".
- reg : Address range of SI register set.
Example:
si1: si@700 {
compatible = "fsl,t1040-qe-si";
reg = <0x700 0x80>;
};
* Serial Interface Block RAM(SIRAM)
store the routing entries of SI
Required properties:
- compatible : should be "fsl,<chip>-qe-siram". For t1040, must contain
"fsl,t1040-qe-siram".
- reg : Address range of SI RAM.
Example:
siram1: siram@1000 {
compatible = "fsl,t1040-qe-siram";
reg = <0x1000 0x800>;
};
* QE Firmware Node
This node defines a firmware binary that is embedded in the device tree, for
......
* Serial
Required Properties:
compatible : must be "fsl,<chip>-ucc-uart". For t1040, must be
"fsl,t1040-ucc-uart".
port-number : port number of UCC-UART
tx/rx-clock-name : should be "brg1"-"brg16" for internal clock source,
should be "clk1"-"clk28" for external clock source.
Example:
ucc_serial: ucc@2200 {
compatible = "fsl,t1040-ucc-uart";
port-number = <0>;
rx-clock-name = "brg2";
tx-clock-name = "brg2";
};
......@@ -166,6 +166,7 @@ config PPC
select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS
select GENERIC_CPU_AUTOPROBE
select HAVE_VIRT_CPU_ACCOUNTING
config GENERIC_CSUM
def_bool CPU_LITTLE_ENDIAN
......@@ -1056,6 +1057,11 @@ config CONSISTENT_SIZE
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
config PIN_TLB_IMMR
bool "Pinned TLB for IMMR"
depends on PIN_TLB
default y
endmenu
if PPC64
......
......@@ -212,7 +212,6 @@ config PPC_EARLY_DEBUG_40x
config PPC_EARLY_DEBUG_CPM
bool "Early serial debugging for Freescale CPM-based serial ports"
depends on SERIAL_CPM
select PIN_TLB if PPC_8xx
help
Select this to enable early debugging for Freescale chips
using a CPM-based serial port. This assumes that the bootwrapper
......
......@@ -113,6 +113,7 @@ src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
src-wlib := $(sort $(src-wlib-y))
src-plat := $(sort $(src-plat-y))
......@@ -296,6 +297,9 @@ image-$(CONFIG_TQM8560) += cuImage.tqm8560
image-$(CONFIG_SBC8548) += cuImage.sbc8548
image-$(CONFIG_KSI8560) += cuImage.ksi8560
# Board ports in arch/powerpc/platform/86xx/Kconfig
image-$(CONFIG_MVME7100) += dtbImage.mvme7100
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
image-$(CONFIG_STORCENTER) += cuImage.storcenter
image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
......
......@@ -51,6 +51,7 @@ aliases {
serial2 = &serial2;
serial3 = &serial3;
pci0 = &pci0;
usb0 = &usb0;
dma0 = &dma0;
dma1 = &dma1;
sdhc = &sdhc;
......
......@@ -51,6 +51,7 @@ aliases {
serial2 = &serial2;
serial3 = &serial3;
pci0 = &pci0;
usb0 = &usb0;
dma0 = &dma0;
dma1 = &dma1;
sdhc = &sdhc;
......
......@@ -106,6 +106,43 @@ sata@220000 {
sata@221000 {
status = "disabled";
};
fman0: fman@400000 {
enet0: ethernet@e0000 {
phy-connection-type = "sgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
mdio0: mdio@e1120 {
front_phy: ethernet-phy@11 {
reg = <0x11>;
};
};
enet1: ethernet@e2000 {
phy-connection-type = "sgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
enet2: ethernet@e4000 {
status = "disabled";
};
enet3: ethernet@e6000 {
status = "disabled";
};
enet4: ethernet@e8000 {
phy-handle = <&front_phy>;
phy-connection-type = "rgmii";
};
enet5: ethernet@f0000 {
status = "disabled";
};
};
};
rio: rapidio@ffe0c0000 {
......
/*
* Device tree source for the Emerson/Artesyn MVME7100
*
* Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
*
* Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
/include/ "mpc8641si-pre.dtsi"
/ {
model = "MVME7100";
compatible = "artesyn,MVME7100";
memory {
device_type = "memory";
reg = <0x00000000 0x80000000>;
};
soc: soc@f1000000 {
ranges = <0x00000000 0xf1000000 0x00100000>;
i2c@3000 {
hwmon@4c {
compatible = "dallas,max6649";
reg = <0x4c>;
};
rtc@68 {
status = "disabled";
};
};
enet0: ethernet@24000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
mdio@24520 {
phy0: ethernet-phy@1 {
reg = <1>;
};
phy1: ethernet-phy@2 {
reg = <2>;
};
phy2: ethernet-phy@3 {
reg = <3>;
};
phy3: ethernet-phy@4 {
reg = <4>;
};
};
enet1: ethernet@25000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
mdio@25520 {
status = "disabled";
};
enet2: ethernet@26000 {
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
};
mdio@26520 {
status = "disabled";
};
enet3: ethernet@27000 {
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
};
mdio@27520 {
status = "disabled";
};
serial1: serial@4600 {
status = "disabled";
};
};
lbc: localbus@f1005000 {
reg = <0xf1005000 0x1000>;
ranges = <0 0 0xf8000000 0x08000000 // NOR Flash (128MB)
2 0 0xf2030000 0x00010000 // NAND Flash (8GB)
3 0 0xf2400000 0x00080000 // MRAM (512KB)
4 0 0xf2000000 0x00010000 // BCSR
5 0 0xf2010000 0x00010000>; // QUART
bcsr@4,0 {
compatible = "artesyn,mvme7100-bcsr";
reg = <4 0 0x10000>;
};
serial@5,1000 {
device_type = "serial";
compatible = "ns16550";
reg = <5 0x1000 0x100>;
clock-frequency = <1843200>;
interrupts = <11 1 0 0>;
};
serial@5,2000 {
device_type = "serial";
compatible = "ns16550";
reg = <5 0x2000 0x100>;
clock-frequency = <1843200>;
interrupts = <11 1 0 0>;
};
serial@5,3000 {
device_type = "serial";
compatible = "ns16550";
reg = <5 0x3000 0x100>;
clock-frequency = <1843200>;
interrupts = <11 1 0 0>;
};
serial@5,4000 {
device_type = "serial";
compatible = "ns16550";
reg = <5 0x4000 0x100>;
clock-frequency = <1843200>;
interrupts = <11 1 0 0>;
};
};
pci0: pcie@f1008000 {
status = "disabled";
};
pci1: pcie@f1009000 {
status = "disabled";
};
chosen {
linux,stdout-path = &serial0;
};
};
/include/ "mpc8641si-post.dtsi"
......@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
usb@210000 {
usb0: usb@210000 {
compatible = "fsl-usb2-dr";
reg = <0x210000 0x1000>;
#address-cells = <1>;
......
......@@ -607,7 +607,7 @@ sdhc@114000 {
/include/ "qoriq-gpio-3.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
fsl,iommu-parent = <&pamu0>;
fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
phy_type = "utmi";
......@@ -615,7 +615,7 @@ usb0: usb@210000 {
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
fsl,iommu-parent = <&pamu0>;
fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
dr_mode = "host";
......@@ -673,3 +673,48 @@ mdio@fd000 {
};
};
};
&qe {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
fsl,qe-num-riscs = <1>;
fsl,qe-num-snums = <28>;
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78
};
ucc@2000 {
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
};
ucc@2200 {
cell-index = <3>;
reg = <0x2200 0x200>;
interrupts = <34>;
interrupt-parent = <&qeic>;
};
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x10000 0x6000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x6000>;
};
};
};
......@@ -212,4 +212,42 @@ pcie@0 {
0 0x00010000>;
};
};
qe: qe@ffe140000 {
ranges = <0x0 0xf 0xfe140000 0x40000>;
reg = <0xf 0xfe140000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
si1: si@700 {
compatible = "fsl,t1040-qe-si";
reg = <0x700 0x80>;
};
siram1: siram@1000 {
compatible = "fsl,t1040-qe-siram";
reg = <0x1000 0x800>;
};
ucc_hdlc: ucc@2000 {
compatible = "fsl,ucc-hdlc";
rx-clock-name = "clk8";
tx-clock-name = "clk9";
fsl,rx-sync-clock = "rsync_pin";
fsl,tx-sync-clock = "tsync_pin";
fsl,tx-timeslot-mask = <0xfffffffe>;
fsl,rx-timeslot-mask = <0xfffffffe>;
fsl,tdm-framer-type = "e1";
fsl,tdm-id = <0>;
fsl,siram-entry-id = <0>;
fsl,tdm-interface;
};
ucc_serial: ucc@2200 {
compatible = "fsl,t1040-ucc-uart";
port-number = <0>;
rx-clock-name = "brg2";
tx-clock-name = "brg2";
};
};
};
......@@ -366,4 +366,42 @@ pcie@0 {
0 0x00010000>;
};
};
qe: qe@ffe140000 {
ranges = <0x0 0xf 0xfe140000 0x40000>;
reg = <0xf 0xfe140000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
si1: si@700 {
compatible = "fsl,t1040-qe-si";
reg = <0x700 0x80>;
};
siram1: siram@1000 {
compatible = "fsl,t1040-qe-siram";
reg = <0x1000 0x800>;
};
ucc_hdlc: ucc@2000 {
compatible = "fsl,ucc-hdlc";
rx-clock-name = "clk8";
tx-clock-name = "clk9";
fsl,rx-sync-clock = "rsync_pin";
fsl,tx-sync-clock = "tsync_pin";
fsl,tx-timeslot-mask = <0xfffffffe>;
fsl,rx-timeslot-mask = <0xfffffffe>;
fsl,tdm-framer-type = "e1";
fsl,tdm-id = <0>;
fsl,siram-entry-id = <0>;
fsl,tdm-interface;
};
ucc_serial: ucc@2200 {
compatible = "fsl,t1040-ucc-uart";
port-number = <0>;
rx-clock-name = "brg2";
tx-clock-name = "brg2";
};
};
};
......@@ -222,4 +222,42 @@ pcie@0 {
0 0x00010000>;
};
};
qe: qe@ffe140000 {
ranges = <0x0 0xf 0xfe140000 0x40000>;
reg = <0xf 0xfe140000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
si1: si@700 {
compatible = "fsl,t1040-qe-si";
reg = <0x700 0x80>;
};
siram1: siram@1000 {
compatible = "fsl,t1040-qe-siram";
reg = <0x1000 0x800>;
};
ucc_hdlc: ucc@2000 {
compatible = "fsl,ucc-hdlc";
rx-clock-name = "clk8";
tx-clock-name = "clk9";
fsl,rx-sync-clock = "rsync_pin";
fsl,tx-sync-clock = "tsync_pin";
fsl,tx-timeslot-mask = <0xfffffffe>;
fsl,rx-timeslot-mask = <0xfffffffe>;
fsl,tdm-framer-type = "e1";
fsl,tdm-id = <0>;
fsl,siram-entry-id = <0>;
fsl,tdm-interface;
};
ucc_serial: ucc@2200 {
compatible = "fsl,t1040-ucc-uart";
port-number = <0>;
rx-clock-name = "brg2";
tx-clock-name = "brg2";
};
};
};
......@@ -56,6 +56,8 @@ aliases {
pci1 = &pci1;
pci2 = &pci2;
pci3 = &pci3;
usb0 = &usb0;
usb1 = &usb1;
dma0 = &dma0;
dma1 = &dma1;
dma2 = &dma2;
......
#include "ppc_asm.h"
.text
.globl _zimage_start
_zimage_start:
mfmsr r10
rlwinm r10,r10,0,~(1<<15) /* Clear MSR_EE */
sync
mtmsr r10
isync
b _zimage_start_lib
/*
* Motload compatibility for the Emerson/Artesyn MVME7100
*
* Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
*
* Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include "ops.h"
#include "stdio.h"
#include "cuboot.h"
#define TARGET_86xx
#define TARGET_HAS_ETH1
#define TARGET_HAS_ETH2
#define TARGET_HAS_ETH3
#include "ppcboot.h"
static bd_t bd;
BSS_STACK(16384);
static void mvme7100_fixups(void)
{
void *devp;
unsigned long busfreq = bd.bi_busfreq * 1000000;
dt_fixup_cpu_clocks(bd.bi_intfreq * 1000000, busfreq / 4, busfreq);
devp = finddevice("/soc@f1000000");
if (devp)
setprop(devp, "bus-frequency", &busfreq, sizeof(busfreq));
devp = finddevice("/soc/serial@4500");
if (devp)
setprop(devp, "clock-frequency", &busfreq, sizeof(busfreq));
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr);
dt_fixup_mac_address_by_alias("ethernet3", bd.bi_enet3addr);
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
CUBOOT_INIT();
fdt_init(_dtb_start);
serial_console_init();
platform_ops.fixups = mvme7100_fixups;
}
......@@ -43,7 +43,7 @@ typedef struct bd_info {
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
defined(TARGET_83xx)
defined(TARGET_83xx) || defined(TARGET_86xx)
unsigned long bi_immr_base; /* base of IMMR register */
#endif
#if defined(TARGET_PPC_MPC52xx)
......
......@@ -302,6 +302,11 @@ mvme5100)
platformo="$object/fixed-head.o $object/mvme5100.o"
binary=y
;;
mvme7100)
platformo="$object/motload-head.o $object/mvme7100.o"
link_address='0x4000000'
binary=y
;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
......
......@@ -74,9 +74,9 @@ CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_NR_UARTS=5
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=5
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250=y
CONFIG_SERIO_LIBPS2=y
......
......@@ -8,3 +8,4 @@ CONFIG_GEF_SBC610=y
CONFIG_MPC8610_HPCD=y
CONFIG_MPC8641_HPCN=y
CONFIG_SBC8641D=y
CONFIG_MVME7100=y
......@@ -39,7 +39,6 @@ CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_IDE=y
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_FS_ENET=y
......
/*
* Common time accounting prototypes and such for all ppc machines.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef __POWERPC_ACCOUNTING_H
#define __POWERPC_ACCOUNTING_H
/* Stuff for accurate time accounting */
struct cpu_accounting_data {
unsigned long user_time; /* accumulated usermode TB ticks */
unsigned long system_time; /* accumulated system TB ticks */
unsigned long user_time_scaled; /* accumulated usermode SPURR ticks */
unsigned long starttime; /* TB value snapshot */
unsigned long starttime_user; /* TB value on exit to usermode */
unsigned long startspurr; /* SPURR value snapshot */
unsigned long utime_sspurr; /* ->user_time when ->startspurr set */
};
#endif
......@@ -90,11 +90,10 @@ static inline void setup_cputime_one_jiffy(void)
static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
{
u64 ct;
u64 sec;
u64 sec = jif;
/* have to be a little careful about overflow */
ct = jif % HZ;
sec = jif / HZ;
ct = do_div(sec, HZ);
if (ct) {
ct *= tb_ticks_per_sec;
do_div(ct, HZ);
......@@ -230,7 +229,16 @@ static inline cputime_t clock_t_to_cputime(const unsigned long clk)
#define cputime64_to_clock_t(ct) cputime_to_clock_t((cputime_t)(ct))
/*
* PPC64 uses PACA which is task independent for storing accounting data while
* PPC32 uses struct thread_info, therefore at task switch the accounting data
* has to be populated in the new task
*/
#ifdef CONFIG_PPC64
static inline void arch_vtime_task_switch(struct task_struct *tsk) { }
#else
void arch_vtime_task_switch(struct task_struct *tsk);
#endif
#endif /* __KERNEL__ */
#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
......
......@@ -287,7 +287,7 @@ do_kvm_##n: \
std r0,GPR0(r1); /* save r0 in stackframe */ \
std r10,GPR1(r1); /* save r1 in stackframe */ \
beq 4f; /* if from kernel mode */ \
ACCOUNT_CPU_USER_ENTRY(r9, r10); \
ACCOUNT_CPU_USER_ENTRY(r13, r9, r10); \
SAVE_PPR(area, r9, r10); \
4: EXCEPTION_PROLOG_COMMON_2(area) \
EXCEPTION_PROLOG_COMMON_3(n) \
......
......@@ -50,6 +50,13 @@ enum fixed_addresses {
#ifdef CONFIG_HIGHMEM
FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
#endif
#ifdef CONFIG_PPC_8xx
/* For IMMR we need an aligned 512K area */
#define FIX_IMMR_SIZE (512 * 1024 / PAGE_SIZE)
FIX_IMMR_START,
FIX_IMMR_BASE = __ALIGN_MASK(FIX_IMMR_START, FIX_IMMR_SIZE - 1) - 1 +
FIX_IMMR_SIZE,
#endif
/* FIX_PCIE_MCFG, */
__end_of_fixed_addresses
......
......@@ -169,6 +169,9 @@ typedef struct {
unsigned int active;
unsigned long vdso_base;
} mm_context_t;
#define PHYS_IMMR_BASE (mfspr(SPRN_IMMR) & 0xfff80000)
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
#endif /* !__ASSEMBLY__ */
#if defined(CONFIG_PPC_4K_PAGES)
......
......@@ -25,6 +25,7 @@
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
#include <asm/kvm_book3s_asm.h>
#endif
#include <asm/accounting.h>
register struct paca_struct *local_paca asm("r13");
......@@ -184,13 +185,7 @@ struct paca_struct {
#endif
/* Stuff for accurate time accounting */
u64 user_time; /* accumulated usermode TB ticks */
u64 system_time; /* accumulated system TB ticks */
u64 user_time_scaled; /* accumulated usermode SPURR ticks */
u64 starttime; /* TB value snapshot */
u64 starttime_user; /* TB value on exit to usermode */
u64 startspurr; /* SPURR value snapshot */
u64 utime_sspurr; /* ->user_time when ->startspurr set */
struct cpu_accounting_data accounting;
u64 stolen_time; /* TB ticks taken by hypervisor */
u64 dtl_ridx; /* read index in dispatch log */
struct dtl_entry *dtl_curr; /* pointer corresponding to dtl_ridx */
......
......@@ -24,27 +24,27 @@
*/
#ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
#define ACCOUNT_CPU_USER_ENTRY(ra, rb)
#define ACCOUNT_CPU_USER_EXIT(ra, rb)
#define ACCOUNT_CPU_USER_ENTRY(ptr, ra, rb)
#define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb)
#define ACCOUNT_STOLEN_TIME
#else
#define ACCOUNT_CPU_USER_ENTRY(ra, rb) \
#define ACCOUNT_CPU_USER_ENTRY(ptr, ra, rb) \
MFTB(ra); /* get timebase */ \
ld rb,PACA_STARTTIME_USER(r13); \
std ra,PACA_STARTTIME(r13); \
PPC_LL rb, ACCOUNT_STARTTIME_USER(ptr); \
PPC_STL ra, ACCOUNT_STARTTIME(ptr); \
subf rb,rb,ra; /* subtract start value */ \
ld ra,PACA_USER_TIME(r13); \
PPC_LL ra, ACCOUNT_USER_TIME(ptr); \
add ra,ra,rb; /* add on to user time */ \
std ra,PACA_USER_TIME(r13); \
PPC_STL ra, ACCOUNT_USER_TIME(ptr); \
#define ACCOUNT_CPU_USER_EXIT(ra, rb) \
#define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb) \
MFTB(ra); /* get timebase */ \
ld rb,PACA_STARTTIME(r13); \
std ra,PACA_STARTTIME_USER(r13); \
PPC_LL rb, ACCOUNT_STARTTIME(ptr); \
PPC_STL ra, ACCOUNT_STARTTIME_USER(ptr); \
subf rb,rb,ra; /* subtract start value */ \
ld ra,PACA_SYSTEM_TIME(r13); \
PPC_LL ra, ACCOUNT_SYSTEM_TIME(ptr); \
add ra,ra,rb; /* add on to system time */ \
std ra,PACA_SYSTEM_TIME(r13)
PPC_STL ra, ACCOUNT_SYSTEM_TIME(ptr)
#ifdef CONFIG_PPC_SPLPAR
#define ACCOUNT_STOLEN_TIME \
......
......@@ -1307,6 +1307,7 @@ static inline unsigned long mfvtb (void)
asm volatile("mfspr %0, %1" : "=r" (rval) : \
"i" (SPRN_TBRU)); rval;})
#endif
#define mftb() mftbl()
#endif /* !__powerpc64__ */
#define mttbl(v) asm volatile("mttbl %0":: "r"(v))
......
......@@ -33,6 +33,7 @@
#include <asm/processor.h>
#include <asm/page.h>
#include <linux/stringify.h>
#include <asm/accounting.h>
/*
* low level task data.
......@@ -45,6 +46,9 @@ struct thread_info {
unsigned long local_flags; /* private flags for thread */
#ifdef CONFIG_LIVEPATCH
unsigned long *livepatch_sp;
#endif
#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(CONFIG_PPC32)
struct cpu_accounting_data accounting;
#endif
/* low level flags - has atomic operations done on it */
unsigned long flags ____cacheline_aligned_in_smp;
......
......@@ -68,6 +68,10 @@
#include "../mm/mmu_decl.h"
#endif
#ifdef CONFIG_PPC_8xx
#include <asm/fixmap.h>
#endif
int main(void)
{
DEFINE(THREAD, offsetof(struct task_struct, thread));
......@@ -240,13 +244,28 @@ int main(void)
DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state));
DEFINE(PACA_DSCR_DEFAULT, offsetof(struct paca_struct, dscr_default));
DEFINE(PACA_STARTTIME, offsetof(struct paca_struct, starttime));
DEFINE(PACA_STARTTIME_USER, offsetof(struct paca_struct, starttime_user));
DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
DEFINE(ACCOUNT_STARTTIME,
offsetof(struct paca_struct, accounting.starttime));
DEFINE(ACCOUNT_STARTTIME_USER,
offsetof(struct paca_struct, accounting.starttime_user));
DEFINE(ACCOUNT_USER_TIME,
offsetof(struct paca_struct, accounting.user_time));
DEFINE(ACCOUNT_SYSTEM_TIME,
offsetof(struct paca_struct, accounting.system_time));
DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
DEFINE(PACA_NAPSTATELOST, offsetof(struct paca_struct, nap_state_lost));
DEFINE(PACA_SPRG_VDSO, offsetof(struct paca_struct, sprg_vdso));
#else /* CONFIG_PPC64 */
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
DEFINE(ACCOUNT_STARTTIME,
offsetof(struct thread_info, accounting.starttime));
DEFINE(ACCOUNT_STARTTIME_USER,
offsetof(struct thread_info, accounting.starttime_user));
DEFINE(ACCOUNT_USER_TIME,
offsetof(struct thread_info, accounting.user_time));
DEFINE(ACCOUNT_SYSTEM_TIME,
offsetof(struct thread_info, accounting.system_time));
#endif
#endif /* CONFIG_PPC64 */
/* RTAS */
......@@ -734,5 +753,9 @@ int main(void)
DEFINE(PPC_DBELL_SERVER, PPC_DBELL_SERVER);
#ifdef CONFIG_PPC_8xx
DEFINE(VIRT_IMMR_BASE, (u64)__fix_to_virt(FIX_IMMR_BASE));
#endif
return 0;
}
......@@ -175,6 +175,12 @@ transfer_to_handler:
addi r12,r12,-1
stw r12,4(r11)
#endif
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
CURRENT_THREAD_INFO(r9, r1)
tophys(r9, r9)
ACCOUNT_CPU_USER_ENTRY(r9, r11, r12)
#endif
b 3f
2: /* if from kernel, check interrupted DOZE/NAP mode and
......@@ -398,6 +404,13 @@ BEGIN_FTR_SECTION
lwarx r7,0,r1
END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
stwcx. r0,0,r1 /* to clear the reservation */
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
andi. r4,r8,MSR_PR
beq 3f
CURRENT_THREAD_INFO(r4, r1)
ACCOUNT_CPU_USER_EXIT(r4, r5, r7)
3:
#endif
lwz r4,_LINK(r1)
lwz r5,_CCR(r1)
mtlr r4
......@@ -769,6 +782,10 @@ restore_user:
andis. r10,r0,DBCR0_IDM@h
bnel- load_dbcr0
#endif
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
CURRENT_THREAD_INFO(r9, r1)
ACCOUNT_CPU_USER_EXIT(r9, r10, r11)
#endif
b restore
......
......@@ -72,7 +72,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM)
std r0,GPR0(r1)
std r10,GPR1(r1)
beq 2f /* if from kernel mode */
ACCOUNT_CPU_USER_ENTRY(r10, r11)
ACCOUNT_CPU_USER_ENTRY(r13, r10, r11)
2: std r2,GPR2(r1)
std r3,GPR3(r1)
mfcr r2
......@@ -246,7 +246,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
ld r4,_LINK(r1)
beq- 1f
ACCOUNT_CPU_USER_EXIT(r11, r12)
ACCOUNT_CPU_USER_EXIT(r13, r11, r12)
BEGIN_FTR_SECTION
HMT_MEDIUM_LOW
......@@ -859,7 +859,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
BEGIN_FTR_SECTION
mtspr SPRN_PPR,r2 /* Restore PPR */
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ACCOUNT_CPU_USER_EXIT(r2, r4)
ACCOUNT_CPU_USER_EXIT(r13, r2, r4)
REST_GPR(13, r1)
1:
mtspr SPRN_SRR1,r3
......
......@@ -386,7 +386,7 @@ exc_##n##_common: \
std r10,_NIP(r1); /* save SRR0 to stackframe */ \
std r11,_MSR(r1); /* save SRR1 to stackframe */ \
beq 2f; /* if from kernel mode */ \
ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */ \
ACCOUNT_CPU_USER_ENTRY(r13,r10,r11);/* accounting (uses cr0+eq) */ \
2: ld r3,excf+EX_R10(r13); /* get back r10 */ \
ld r4,excf+EX_R11(r13); /* get back r11 */ \
mfspr r5,scratch; /* get back r13 */ \
......@@ -1059,7 +1059,7 @@ fast_exception_return:
andi. r6,r10,MSR_PR
REST_2GPRS(6, r1)
beq 1f
ACCOUNT_CPU_USER_EXIT(r10, r11)
ACCOUNT_CPU_USER_EXIT(r13, r10, r11)
ld r0,GPR13(r1)
1: stdcx. r0,0,r1 /* to clear the reservation */
......
......@@ -30,6 +30,7 @@
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/ptrace.h>
#include <asm/fixmap.h>
/* Macro to make the code more readable. */
#ifdef CONFIG_8xx_CPU6
......@@ -383,28 +384,57 @@ InstructionTLBMiss:
EXCEPTION_EPILOG_0
rfi
/*
* Bottom part of DataStoreTLBMiss handler for IMMR area
* not enough space in the DataStoreTLBMiss area
*/
DTLBMissIMMR:
mtcr r10
/* Set 512k byte guarded page and mark it valid */
li r10, MD_PS512K | MD_GUARDED | MD_SVALID
MTSPR_CPU6(SPRN_MD_TWC, r10, r11)
mfspr r10, SPRN_IMMR /* Get current IMMR */
rlwinm r10, r10, 0, 0xfff80000 /* Get 512 kbytes boundary */
ori r10, r10, 0xf0 | MD_SPS16K | _PAGE_SHARED | _PAGE_DIRTY | \
_PAGE_PRESENT | _PAGE_NO_CACHE
MTSPR_CPU6(SPRN_MD_RPN, r10, r11) /* Update TLB entry */
li r11, RPN_PATTERN
mtspr SPRN_DAR, r11 /* Tag DAR */
EXCEPTION_EPILOG_0
rfi
. = 0x1200
DataStoreTLBMiss:
mtspr SPRN_SPRG_SCRATCH2, r3
EXCEPTION_PROLOG_0
mfcr r3
mfcr r10
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
mfspr r10, SPRN_MD_EPN
IS_KERNEL(r11, r10)
mfspr r11, SPRN_MD_EPN
rlwinm r11, r11, 16, 0xfff8
#ifndef CONFIG_PIN_TLB_IMMR
cmpli cr0, r11, VIRT_IMMR_BASE@h
#endif
cmpli cr7, r11, PAGE_OFFSET@h
#ifndef CONFIG_PIN_TLB_IMMR
_ENTRY(DTLBMiss_jmp)
beq- DTLBMissIMMR
#endif
bge- cr7, 4f
mfspr r11, SPRN_M_TW /* Get level 1 table */
BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3:
mtcr r10
#ifdef CONFIG_8xx_CPU6
mtspr SPRN_SPRG_SCRATCH2, r3
#endif
mfspr r10, SPRN_MD_EPN
/* Insert level 1 index */
rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */
mtcr r11
bt- 28,DTLBMiss8M /* bit 28 = Large page (8M) */
mtcr r3
/* We have a pte table, so load fetch the pte from the table.
*/
......@@ -452,29 +482,30 @@ DataStoreTLBMiss:
MTSPR_CPU6(SPRN_MD_RPN, r10, r3) /* Update TLB entry */
/* Restore registers */
#ifdef CONFIG_8xx_CPU6
mfspr r3, SPRN_SPRG_SCRATCH2
#endif
mtspr SPRN_DAR, r11 /* Tag DAR */
EXCEPTION_EPILOG_0
rfi
DTLBMiss8M:
mtcr r3
ori r11, r11, MD_SVALID
MTSPR_CPU6(SPRN_MD_TWC, r11, r3)
#ifdef CONFIG_PPC_16K_PAGES
/*
* In 16k pages mode, each PGD entry defines a 64M block.
* Here we select the 8M page within the block.
*/
rlwimi r11, r10, 0, 0x03800000
#endif
rlwinm r10, r11, 0, 0xff800000
4:
_ENTRY(DTLBMiss_cmp)
cmpli cr0, r11, (PAGE_OFFSET + 0x1800000)@h
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
bge- 3b
mtcr r10
/* Set 8M byte page and mark it valid */
li r10, MD_PS8MEG | MD_SVALID
MTSPR_CPU6(SPRN_MD_TWC, r10, r11)
mfspr r10, SPRN_MD_EPN
rlwinm r10, r10, 0, 0x0f800000 /* 8xx supports max 256Mb RAM */
ori r10, r10, 0xf0 | MD_SPS16K | _PAGE_SHARED | _PAGE_DIRTY | \
_PAGE_PRESENT
MTSPR_CPU6(SPRN_MD_RPN, r10, r3) /* Update TLB entry */
MTSPR_CPU6(SPRN_MD_RPN, r10, r11) /* Update TLB entry */
li r11, RPN_PATTERN
mfspr r3, SPRN_SPRG_SCRATCH2
mtspr SPRN_DAR, r11 /* Tag DAR */
EXCEPTION_EPILOG_0
rfi
......@@ -553,12 +584,14 @@ FixupDAR:/* Entry point for dcbx workaround. */
IS_KERNEL(r11, r10)
mfspr r11, SPRN_M_TW /* Get level 1 table */
BRANCH_UNLESS_KERNEL(3f)
rlwinm r11, r10, 16, 0xfff8
_ENTRY(FixupDAR_cmp)
cmpli cr7, r11, (PAGE_OFFSET + 0x1800000)@h
blt- cr7, 200f
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
/* Insert level 1 index */
3: rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */
mtcr r11
bt 28,200f /* bit 28 = Large page (8M) */
rlwinm r11, r11,0,0,19 /* Extract page descriptor page address */
/* Insert level 2 index */
rlwimi r11, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
......@@ -584,8 +617,8 @@ FixupDAR:/* Entry point for dcbx workaround. */
141: mfspr r10,SPRN_SPRG_SCRATCH2
b DARFixed /* Nope, go back to normal TLB processing */
/* concat physical page address(r11) and page offset(r10) */
200: rlwimi r11, r10, 0, 32 - (PAGE_SHIFT << 1), 31
/* create physical page address from effective address */
200: tophys(r11, r10)
b 201b
144: mfspr r10, SPRN_DSISR
......@@ -763,10 +796,18 @@ start_here:
* virtual to physical. Also, set the cache mode since that is defined
* by TLB entries and perform any additional mapping (like of the IMMR).
* If configured to pin some TLBs, we pin the first 8 Mbytes of kernel,
* 24 Mbytes of data, and the 8M IMMR space. Anything not covered by
* 24 Mbytes of data, and the 512k IMMR space. Anything not covered by
* these mappings is mapped by page tables.
*/
initial_mmu:
li r8, 0
mtspr SPRN_MI_CTR, r8 /* remove PINNED ITLB entries */
lis r10, MD_RESETVAL@h
#ifndef CONFIG_8xx_COPYBACK
oris r10, r10, MD_WTDEF@h
#endif
mtspr SPRN_MD_CTR, r10 /* remove PINNED DTLB entries */
tlbia /* Invalidate all TLB entries */
/* Always pin the first 8 MB ITLB to prevent ITLB
misses while mucking around with SRR0/SRR1 in asm
......@@ -777,34 +818,20 @@ initial_mmu:
mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */
#ifdef CONFIG_PIN_TLB
lis r10, (MD_RSV4I | MD_RESETVAL)@h
ori r10, r10, 0x1c00
mr r8, r10
#else
lis r10, MD_RESETVAL@h
#endif
#ifndef CONFIG_8xx_COPYBACK
oris r10, r10, MD_WTDEF@h
#endif
oris r10, r10, MD_RSV4I@h
mtspr SPRN_MD_CTR, r10 /* Set data TLB control */
#endif
/* Now map the lower 8 Meg into the TLBs. For this quick hack,
* we can load the instruction and data TLB registers with the
* same values.
*/
/* Now map the lower 8 Meg into the ITLB. */
lis r8, KERNELBASE@h /* Create vaddr for TLB */
ori r8, r8, MI_EVALID /* Mark it valid */
mtspr SPRN_MI_EPN, r8
mtspr SPRN_MD_EPN, r8
li r8, MI_PS8MEG | (2 << 5) /* Set 8M byte page, APG 2 */
ori r8, r8, MI_SVALID /* Make it valid */
mtspr SPRN_MI_TWC, r8
li r8, MI_PS8MEG /* Set 8M byte page, APG 0 */
ori r8, r8, MI_SVALID /* Make it valid */
mtspr SPRN_MD_TWC, r8
li r8, MI_BOOTINIT /* Create RPN for address 0 */
mtspr SPRN_MI_RPN, r8 /* Store TLB entry */
mtspr SPRN_MD_RPN, r8
lis r8, MI_APG_INIT@h /* Set protection modes */
ori r8, r8, MI_APG_INIT@l
mtspr SPRN_MI_AP, r8
......@@ -812,51 +839,25 @@ initial_mmu:
ori r8, r8, MD_APG_INIT@l
mtspr SPRN_MD_AP, r8
/* Map another 8 MByte at the IMMR to get the processor
/* Map a 512k page for the IMMR to get the processor
* internal registers (among other things).
*/
#ifdef CONFIG_PIN_TLB
addi r10, r10, 0x0100
#ifdef CONFIG_PIN_TLB_IMMR
ori r10, r10, 0x1c00
mtspr SPRN_MD_CTR, r10
#endif
mfspr r9, 638 /* Get current IMMR */
andis. r9, r9, 0xff80 /* Get 8Mbyte boundary */
andis. r9, r9, 0xfff8 /* Get 512 kbytes boundary */
mr r8, r9 /* Create vaddr for TLB */
lis r8, VIRT_IMMR_BASE@h /* Create vaddr for TLB */
ori r8, r8, MD_EVALID /* Mark it valid */
mtspr SPRN_MD_EPN, r8
li r8, MD_PS8MEG /* Set 8M byte page */
li r8, MD_PS512K | MD_GUARDED /* Set 512k byte page */
ori r8, r8, MD_SVALID /* Make it valid */
mtspr SPRN_MD_TWC, r8
mr r8, r9 /* Create paddr for TLB */
ori r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
mtspr SPRN_MD_RPN, r8
#ifdef CONFIG_PIN_TLB
/* Map two more 8M kernel data pages.
*/
addi r10, r10, 0x0100
mtspr SPRN_MD_CTR, r10
lis r8, KERNELBASE@h /* Create vaddr for TLB */
addis r8, r8, 0x0080 /* Add 8M */
ori r8, r8, MI_EVALID /* Mark it valid */
mtspr SPRN_MD_EPN, r8
li r9, MI_PS8MEG /* Set 8M byte page */
ori r9, r9, MI_SVALID /* Make it valid */
mtspr SPRN_MD_TWC, r9
li r11, MI_BOOTINIT /* Create RPN for address 0 */
addis r11, r11, 0x0080 /* Add 8M */
mtspr SPRN_MD_RPN, r11
addi r10, r10, 0x0100
mtspr SPRN_MD_CTR, r10
addis r8, r8, 0x0080 /* Add 8M */
mtspr SPRN_MD_EPN, r8
mtspr SPRN_MD_TWC, r9
addis r11, r11, 0x0080 /* Add 8M */
mtspr SPRN_MD_RPN, r11
#endif
/* Since the cache is enabled according to the information we
......
......@@ -167,7 +167,15 @@ DEFINE_PER_CPU(unsigned long, cputime_scaled_last_delta);
cputime_t cputime_one_jiffy;
#ifdef CONFIG_PPC_SPLPAR
void (*dtl_consumer)(struct dtl_entry *, u64);
#endif
#ifdef CONFIG_PPC64
#define get_accounting(tsk) (&get_paca()->accounting)
#else
#define get_accounting(tsk) (&task_thread_info(tsk)->accounting)
#endif
static void calc_cputime_factors(void)
{
......@@ -187,7 +195,7 @@ static void calc_cputime_factors(void)
* Read the SPURR on systems that have it, otherwise the PURR,
* or if that doesn't exist return the timebase value passed in.
*/
static u64 read_spurr(u64 tb)
static unsigned long read_spurr(unsigned long tb)
{
if (cpu_has_feature(CPU_FTR_SPURR))
return mfspr(SPRN_SPURR);
......@@ -250,8 +258,8 @@ static u64 scan_dispatch_log(u64 stop_tb)
void accumulate_stolen_time(void)
{
u64 sst, ust;
u8 save_soft_enabled = local_paca->soft_enabled;
struct cpu_accounting_data *acct = &local_paca->accounting;
/* We are called early in the exception entry, before
* soft/hard_enabled are sync'ed to the expected state
......@@ -261,10 +269,10 @@ void accumulate_stolen_time(void)
*/
local_paca->soft_enabled = 0;
sst = scan_dispatch_log(local_paca->starttime_user);
ust = scan_dispatch_log(local_paca->starttime);
local_paca->system_time -= sst;
local_paca->user_time -= ust;
sst = scan_dispatch_log(acct->starttime_user);
ust = scan_dispatch_log(acct->starttime);
acct->system_time -= sst;
acct->user_time -= ust;
local_paca->stolen_time += ust + sst;
local_paca->soft_enabled = save_soft_enabled;
......@@ -276,7 +284,7 @@ static inline u64 calculate_stolen_time(u64 stop_tb)
if (get_paca()->dtl_ridx != be64_to_cpu(get_lppaca()->dtl_idx)) {
stolen = scan_dispatch_log(stop_tb);
get_paca()->system_time -= stolen;
get_paca()->accounting.system_time -= stolen;
}
stolen += get_paca()->stolen_time;
......@@ -296,27 +304,29 @@ static inline u64 calculate_stolen_time(u64 stop_tb)
* Account time for a transition between system, hard irq
* or soft irq state.
*/
static u64 vtime_delta(struct task_struct *tsk,
u64 *sys_scaled, u64 *stolen)
static unsigned long vtime_delta(struct task_struct *tsk,
unsigned long *sys_scaled,
unsigned long *stolen)
{
u64 now, nowscaled, deltascaled;
u64 udelta, delta, user_scaled;
unsigned long now, nowscaled, deltascaled;
unsigned long udelta, delta, user_scaled;
struct cpu_accounting_data *acct = get_accounting(tsk);
WARN_ON_ONCE(!irqs_disabled());
now = mftb();
nowscaled = read_spurr(now);
get_paca()->system_time += now - get_paca()->starttime;
get_paca()->starttime = now;
deltascaled = nowscaled - get_paca()->startspurr;
get_paca()->startspurr = nowscaled;
acct->system_time += now - acct->starttime;
acct->starttime = now;
deltascaled = nowscaled - acct->startspurr;
acct->startspurr = nowscaled;
*stolen = calculate_stolen_time(now);
delta = get_paca()->system_time;
get_paca()->system_time = 0;
udelta = get_paca()->user_time - get_paca()->utime_sspurr;
get_paca()->utime_sspurr = get_paca()->user_time;
delta = acct->system_time;
acct->system_time = 0;
udelta = acct->user_time - acct->utime_sspurr;
acct->utime_sspurr = acct->user_time;
/*
* Because we don't read the SPURR on every kernel entry/exit,
......@@ -338,14 +348,14 @@ static u64 vtime_delta(struct task_struct *tsk,
*sys_scaled = deltascaled;
}
}
get_paca()->user_time_scaled += user_scaled;
acct->user_time_scaled += user_scaled;
return delta;
}
void vtime_account_system(struct task_struct *tsk)
{
u64 delta, sys_scaled, stolen;
unsigned long delta, sys_scaled, stolen;
delta = vtime_delta(tsk, &sys_scaled, &stolen);
account_system_time(tsk, 0, delta, sys_scaled);
......@@ -356,7 +366,7 @@ EXPORT_SYMBOL_GPL(vtime_account_system);
void vtime_account_idle(struct task_struct *tsk)
{
u64 delta, sys_scaled, stolen;
unsigned long delta, sys_scaled, stolen;
delta = vtime_delta(tsk, &sys_scaled, &stolen);
account_idle_time(delta + stolen);
......@@ -374,15 +384,32 @@ void vtime_account_idle(struct task_struct *tsk)
void vtime_account_user(struct task_struct *tsk)
{
cputime_t utime, utimescaled;
struct cpu_accounting_data *acct = get_accounting(tsk);
utime = get_paca()->user_time;
utimescaled = get_paca()->user_time_scaled;
get_paca()->user_time = 0;
get_paca()->user_time_scaled = 0;
get_paca()->utime_sspurr = 0;
utime = acct->user_time;
utimescaled = acct->user_time_scaled;
acct->user_time = 0;
acct->user_time_scaled = 0;
acct->utime_sspurr = 0;
account_user_time(tsk, utime, utimescaled);
}
#ifdef CONFIG_PPC32
/*
* Called from the context switch with interrupts disabled, to charge all
* accumulated times to the current process, and to prepare accounting on
* the next process.
*/
void arch_vtime_task_switch(struct task_struct *prev)
{
struct cpu_accounting_data *acct = get_accounting(current);
acct->starttime = get_accounting(prev)->starttime;
acct->system_time = 0;
acct->user_time = 0;
}
#endif /* CONFIG_PPC32 */
#else /* ! CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
#define calc_cputime_factors()
#endif
......
......@@ -13,62 +13,115 @@
*/
#include <linux/memblock.h>
#include <asm/fixmap.h>
#include <asm/code-patching.h>
#include "mmu_decl.h"
#define IMMR_SIZE (FIX_IMMR_SIZE << PAGE_SHIFT)
extern int __map_without_ltlbs;
/*
* MMU_init_hw does the chip-specific initialization of the MMU hardware.
* Return PA for this VA if it is in IMMR area, or 0
*/
void __init MMU_init_hw(void)
phys_addr_t v_block_mapped(unsigned long va)
{
unsigned long p = PHYS_IMMR_BASE;
if (__map_without_ltlbs)
return 0;
if (va >= VIRT_IMMR_BASE && va < VIRT_IMMR_BASE + IMMR_SIZE)
return p + va - VIRT_IMMR_BASE;
return 0;
}
/*
* Return VA for a given PA or 0 if not mapped
*/
unsigned long p_block_mapped(phys_addr_t pa)
{
/* Nothing to do for the time being but keep it similar to other PPC */
unsigned long p = PHYS_IMMR_BASE;
if (__map_without_ltlbs)
return 0;
if (pa >= p && pa < p + IMMR_SIZE)
return VIRT_IMMR_BASE + pa - p;
return 0;
}
#define LARGE_PAGE_SIZE_4M (1<<22)
#define LARGE_PAGE_SIZE_8M (1<<23)
#define LARGE_PAGE_SIZE_64M (1<<26)
unsigned long __init mmu_mapin_ram(unsigned long top)
/*
* MMU_init_hw does the chip-specific initialization of the MMU hardware.
*/
void __init MMU_init_hw(void)
{
unsigned long v, s, mapped;
phys_addr_t p;
/* PIN up to the 3 first 8Mb after IMMR in DTLB table */
#ifdef CONFIG_PIN_TLB
unsigned long ctr = mfspr(SPRN_MD_CTR) & 0xfe000000;
unsigned long flags = 0xf0 | MD_SPS16K | _PAGE_SHARED | _PAGE_DIRTY;
#ifdef CONFIG_PIN_TLB_IMMR
int i = 29;
#else
int i = 28;
#endif
unsigned long addr = 0;
unsigned long mem = total_lowmem;
for (; i < 32 && mem >= LARGE_PAGE_SIZE_8M; i++) {
mtspr(SPRN_MD_CTR, ctr | (i << 8));
mtspr(SPRN_MD_EPN, (unsigned long)__va(addr) | MD_EVALID);
mtspr(SPRN_MD_TWC, MD_PS8MEG | MD_SVALID);
mtspr(SPRN_MD_RPN, addr | flags | _PAGE_PRESENT);
addr += LARGE_PAGE_SIZE_8M;
mem -= LARGE_PAGE_SIZE_8M;
}
#endif
}
v = KERNELBASE;
p = 0;
s = top;
static void mmu_mapin_immr(void)
{
unsigned long p = PHYS_IMMR_BASE;
unsigned long v = VIRT_IMMR_BASE;
unsigned long f = pgprot_val(PAGE_KERNEL_NCG);
int offset;
if (__map_without_ltlbs)
return 0;
for (offset = 0; offset < IMMR_SIZE; offset += PAGE_SIZE)
map_page(v + offset, p + offset, f);
}
#ifdef CONFIG_PPC_4K_PAGES
while (s >= LARGE_PAGE_SIZE_8M) {
pmd_t *pmdp;
unsigned long val = p | MD_PS8MEG;
/* Address of instructions to patch */
#ifndef CONFIG_PIN_TLB_IMMR
extern unsigned int DTLBMiss_jmp;
#endif
extern unsigned int DTLBMiss_cmp, FixupDAR_cmp;
pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
*pmdp++ = __pmd(val);
*pmdp++ = __pmd(val + LARGE_PAGE_SIZE_4M);
void mmu_patch_cmp_limit(unsigned int *addr, unsigned long mapped)
{
unsigned int instr = *addr;
v += LARGE_PAGE_SIZE_8M;
p += LARGE_PAGE_SIZE_8M;
s -= LARGE_PAGE_SIZE_8M;
}
#else /* CONFIG_PPC_16K_PAGES */
while (s >= LARGE_PAGE_SIZE_64M) {
pmd_t *pmdp;
unsigned long val = p | MD_PS8MEG;
instr &= 0xffff0000;
instr |= (unsigned long)__va(mapped) >> 16;
patch_instruction(addr, instr);
}
pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
*pmdp++ = __pmd(val);
unsigned long __init mmu_mapin_ram(unsigned long top)
{
unsigned long mapped;
v += LARGE_PAGE_SIZE_64M;
p += LARGE_PAGE_SIZE_64M;
s -= LARGE_PAGE_SIZE_64M;
}
if (__map_without_ltlbs) {
mapped = 0;
mmu_mapin_immr();
#ifndef CONFIG_PIN_TLB_IMMR
patch_instruction(&DTLBMiss_jmp, PPC_INST_NOP);
#endif
} else {
mapped = top & ~(LARGE_PAGE_SIZE_8M - 1);
}
mapped = top - s;
mmu_patch_cmp_limit(&DTLBMiss_cmp, mapped);
mmu_patch_cmp_limit(&FixupDAR_cmp, mapped);
/* If the size of RAM is not an exact power of two, we may not
* have covered RAM in its entirety with 8 MiB
......@@ -77,6 +130,7 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
* coverage with normal-sized pages (or other reasons) do not
* attempt to allocate outside the allowed range.
*/
if (mapped)
memblock_set_current_limit(mapped);
return mapped;
......@@ -90,13 +144,8 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
*/
BUG_ON(first_memblock_base != 0);
#ifdef CONFIG_PIN_TLB
/* 8xx can only access 24MB at the moment */
memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000));
#else
/* 8xx can only access 8MB at the moment */
memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
#endif
}
/*
......
......@@ -154,9 +154,10 @@ struct tlbcam {
};
#endif
#if defined(CONFIG_6xx) || defined(CONFIG_FSL_BOOKE)
#if defined(CONFIG_6xx) || defined(CONFIG_FSL_BOOKE) || defined(CONFIG_PPC_8xx)
/* 6xx have BATS */
/* FSL_BOOKE have TLBCAM */
/* 8xx have LTLB */
phys_addr_t v_block_mapped(unsigned long va);
unsigned long p_block_mapped(phys_addr_t pa);
#else
......
......@@ -61,6 +61,11 @@ config GEF_SBC610
help
This option enables support for the GE SBC610.
config MVME7100
bool "Artesyn MVME7100"
help
This option enables support for the Emerson/Artesyn MVME7100 board.
endif
config MPC8641
......@@ -69,7 +74,8 @@ config MPC8641
select FSL_PCI if PCI
select PPC_UDBG_16550
select MPIC
default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 || GEF_PPC9A \
|| MVME7100
config MPC8610
bool
......
......@@ -10,3 +10,4 @@ obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o
obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o
obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o
obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o
obj-$(CONFIG_MVME7100) += mvme7100.o
/*
* Board setup routines for the Emerson/Artesyn MVME7100
*
* Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
*
* Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
*
* Based on earlier code by:
*
* Ajit Prem <ajit.prem@emerson.com>
* Copyright 2008 Emerson
*
* USB host fixup is borrowed by:
*
* Martyn Welch <martyn.welch@ge.com>
* Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/pci.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include "mpc86xx.h"
#define MVME7100_INTERRUPT_REG_2_OFFSET 0x05
#define MVME7100_DS1375_MASK 0x40
#define MVME7100_MAX6649_MASK 0x20
#define MVME7100_ABORT_MASK 0x10
/*
* Setup the architecture
*/
static void __init mvme7100_setup_arch(void)
{
struct device_node *bcsr_node;
void __iomem *mvme7100_regs = NULL;
u8 reg;
if (ppc_md.progress)
ppc_md.progress("mvme7100_setup_arch()", 0);
#ifdef CONFIG_SMP
mpc86xx_smp_init();
#endif
fsl_pci_assign_primary();
/* Remap BCSR registers */
bcsr_node = of_find_compatible_node(NULL, NULL,
"artesyn,mvme7100-bcsr");
if (bcsr_node) {
mvme7100_regs = of_iomap(bcsr_node, 0);
of_node_put(bcsr_node);
}
if (mvme7100_regs) {
/* Disable ds1375, max6649, and abort interrupts */
reg = readb(mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET);
reg |= MVME7100_DS1375_MASK | MVME7100_MAX6649_MASK
| MVME7100_ABORT_MASK;
writeb(reg, mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET);
} else
pr_warn("Unable to map board registers\n");
pr_info("MVME7100 board from Artesyn\n");
}
/*
* Called very early, device-tree isn't unflattened
*/
static int __init mvme7100_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "artesyn,MVME7100");
}
static void mvme7100_usb_host_fixup(struct pci_dev *pdev)
{
unsigned int val;
if (!machine_is(mvme7100))
return;
/* Ensure only ports 1 & 2 are enabled */
pci_read_config_dword(pdev, 0xe0, &val);
pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2);
/* System clock is 48-MHz Oscillator and EHCI Enabled. */
pci_write_config_dword(pdev, 0xe4, 1 << 5);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
mvme7100_usb_host_fixup);
machine_arch_initcall(mvme7100, mpc86xx_common_publish_devices);
define_machine(mvme7100) {
.name = "MVME7100",
.probe = mvme7100_probe,
.setup_arch = mvme7100_setup_arch,
.init_IRQ = mpc86xx_init_irq,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.time_init = mpc86xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};
config PPC64
bool "64-bit kernel"
default n
select HAVE_VIRT_CPU_ACCOUNTING
select ZLIB_DEFLATE
help
This option selects whether a 32-bit or a 64-bit kernel
......
......@@ -28,6 +28,7 @@
#include <asm/udbg.h>
#include <asm/io.h>
#include <asm/cpm.h>
#include <asm/fixmap.h>
#include <soc/fsl/qe/qe.h>
#include <mm/mmu_decl.h>
......@@ -37,25 +38,36 @@
#endif
#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
static u32 __iomem *cpm_udbg_txdesc =
(u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
static u32 __iomem *cpm_udbg_txdesc;
static u8 __iomem *cpm_udbg_txbuf;
static void udbg_putc_cpm(char c)
{
u8 __iomem *txbuf = (u8 __iomem __force *)in_be32(&cpm_udbg_txdesc[1]);
if (c == '\n')
udbg_putc_cpm('\r');
while (in_be32(&cpm_udbg_txdesc[0]) & 0x80000000)
;
out_8(txbuf, c);
out_8(cpm_udbg_txbuf, c);
out_be32(&cpm_udbg_txdesc[0], 0xa0000001);
}
void __init udbg_init_cpm(void)
{
#ifdef CONFIG_PPC_8xx
cpm_udbg_txdesc = (u32 __iomem __force *)
(CONFIG_PPC_EARLY_DEBUG_CPM_ADDR - PHYS_IMMR_BASE +
VIRT_IMMR_BASE);
cpm_udbg_txbuf = (u8 __iomem __force *)
(in_be32(&cpm_udbg_txdesc[1]) - PHYS_IMMR_BASE +
VIRT_IMMR_BASE);
#else
cpm_udbg_txdesc = (u32 __iomem __force *)
CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
cpm_udbg_txbuf = (u8 __iomem __force *)in_be32(&cpm_udbg_txdesc[1]);
#endif
if (cpm_udbg_txdesc) {
#ifdef CONFIG_CPM2
setbat(1, 0xf0000000, 0xf0000000, 1024*1024, PAGE_KERNEL_NCG);
......
......@@ -90,12 +90,8 @@ static int mpc85xx_l2ctlr_of_probe(struct platform_device *dev)
}
l2cache_size = *prop;
if (get_cache_sram_params(&sram_params)) {
dev_err(&dev->dev,
"Entire L2 as cache, provide valid sram offset and size\n");
return -EINVAL;
}
if (get_cache_sram_params(&sram_params))
return 0; /* fall back to L2 cache only */
rem = l2cache_size % sram_params.sram_size;
ways = LOCK_WAYS_FULL * sram_params.sram_size / l2cache_size;
......
......@@ -2284,13 +2284,13 @@ static void dump_one_paca(int cpu)
DUMP(p, subcore_sibling_mask, "x");
#endif
DUMP(p, user_time, "llx");
DUMP(p, system_time, "llx");
DUMP(p, user_time_scaled, "llx");
DUMP(p, starttime, "llx");
DUMP(p, starttime_user, "llx");
DUMP(p, startspurr, "llx");
DUMP(p, utime_sspurr, "llx");
DUMP(p, accounting.user_time, "llx");
DUMP(p, accounting.system_time, "llx");
DUMP(p, accounting.user_time_scaled, "llx");
DUMP(p, accounting.starttime, "llx");
DUMP(p, accounting.starttime_user, "llx");
DUMP(p, accounting.startspurr, "llx");
DUMP(p, accounting.utime_sspurr, "llx");
DUMP(p, stolen_time, "llx");
#undef DUMP
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment