V4L/DVB (11650): gspca - m5602: Sort out macro conflict by adding a prefix

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/gspca/m5602/m5602_mt9m111.c

@@ -86,7 +86,7 @@ const static struct ctrl mt9m111_ctrls[] = {
 			.minimum        = 0,
 			.maximum        = (INITIAL_MAX_GAIN - 1) * 2 * 2 * 2,
 			.step           = 1,
-			.default_value  = DEFAULT_GAIN,
+			.default_value  = MT9M111_DEFAULT_GAIN,
 			.flags          = V4L2_CTRL_FLAG_SLIDER
 		},
 		.set = mt9m111_set_gain,

drivers/media/video/gspca/m5602/m5602_mt9m111.h

@@ -97,7 +97,7 @@
 #define MT9M111_2D_DEFECT_CORRECTION_ENABLE	(1 << 0)
 
 #define INITIAL_MAX_GAIN			64
-#define DEFAULT_GAIN 				283
+#define MT9M111_DEFAULT_GAIN 			283
 #define MT9M111_GREEN_GAIN_DEFAULT		0x20
 #define MT9M111_BLUE_GAIN_DEFAULT		0x20
 #define MT9M111_RED_GAIN_DEFAULT		0x20

drivers/media/video/gspca/m5602/m5602_ov7660.c

@@ -31,7 +31,7 @@ const static struct ctrl ov7660_ctrls[] = {
 			.minimum	= 0x00,
 			.maximum	= 0xff,
 			.step		= 0x1,
-			.default_value	= DEFAULT_GAIN,
+			.default_value	= OV7660_DEFAULT_GAIN,
 			.flags		= V4L2_CTRL_FLAG_SLIDER
 		},
 		.set = ov7660_set_gain,

drivers/media/video/gspca/m5602/m5602_ov7660.h

@@ -78,11 +78,11 @@
 #define OV7660_HV 		0x69
 #define OV7660_RSVDA1 		0xa1
 
-#define DEFAULT_GAIN		0x0e
-#define DEFAULT_RED_GAIN	0x80
-#define DEFAULT_BLUE_GAIN 	0x80
-#define DEFAULT_SATURATION	0x00
-#define DEFAULT_EXPOSURE	0x20
+#define OV7660_DEFAULT_GAIN		0x0e
+#define OV7660_DEFAULT_RED_GAIN	0x80
+#define OV7660_DEFAULT_BLUE_GAIN 	0x80
+#define OV7660_DEFAULT_SATURATION	0x00
+#define OV7660_DEFAULT_EXPOSURE	0x20
 
 /* Kernel module parameters */
 extern int force_sensor;
@@ -177,7 +177,7 @@ static const unsigned char init_ov7660[][4] =
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x02},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
 
-	{SENSOR, OV7660_AECH, DEFAULT_EXPOSURE},
+	{SENSOR, OV7660_AECH, OV7660_DEFAULT_EXPOSURE},
 	{SENSOR, OV7660_COM1, 0x00},
 
 	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},