Commit 72ba48be authored by Andrew Lunn's avatar Andrew Lunn Committed by David S. Miller

phy: Add phydev_err() and phydev_dbg() macros

In preparation for moving some of the phy_device structure members,
add macros for printing errors and debug information.
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent cd690e48
......@@ -281,7 +281,7 @@ static void at803x_link_change_notify(struct phy_device *phydev)
at803x_context_restore(phydev, &context);
dev_dbg(&phydev->dev, "%s(): phy was reset\n",
phydev_dbg(phydev, "%s(): phy was reset\n",
__func__);
priv->phy_reset = true;
}
......
......@@ -163,8 +163,9 @@ static int bcm87xx_did_interrupt(struct phy_device *phydev)
reg = phy_read(phydev, BCM87XX_LASI_STATUS);
if (reg < 0) {
dev_err(&phydev->dev,
"Error: Read of BCM87XX_LASI_STATUS failed: %d\n", reg);
phydev_err(phydev,
"Error: Read of BCM87XX_LASI_STATUS failed: %d\n",
reg);
return 0;
}
return (reg & 1) != 0;
......
......@@ -224,7 +224,7 @@ static int kszphy_setup_led(struct phy_device *phydev, u32 reg, int val)
rc = phy_write(phydev, reg, temp);
out:
if (rc < 0)
dev_err(&phydev->dev, "failed to set led mode\n");
phydev_err(phydev, "failed to set led mode\n");
return rc;
}
......@@ -243,7 +243,7 @@ static int kszphy_broadcast_disable(struct phy_device *phydev)
ret = phy_write(phydev, MII_KSZPHY_OMSO, ret | KSZPHY_OMSO_B_CAST_OFF);
out:
if (ret)
dev_err(&phydev->dev, "failed to disable broadcast address\n");
phydev_err(phydev, "failed to disable broadcast address\n");
return ret;
}
......@@ -263,7 +263,7 @@ static int kszphy_nand_tree_disable(struct phy_device *phydev)
ret & ~KSZPHY_OMSO_NAND_TREE_ON);
out:
if (ret)
dev_err(&phydev->dev, "failed to disable NAND tree mode\n");
phydev_err(phydev, "failed to disable NAND tree mode\n");
return ret;
}
......@@ -288,7 +288,8 @@ static int kszphy_config_init(struct phy_device *phydev)
if (priv->rmii_ref_clk_sel) {
ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
if (ret) {
dev_err(&phydev->dev, "failed to set rmii reference clock\n");
phydev_err(phydev,
"failed to set rmii reference clock\n");
return ret;
}
}
......@@ -649,7 +650,7 @@ static int kszphy_probe(struct phy_device *phydev)
priv->led_mode = -1;
if (priv->led_mode > 3) {
dev_err(&phydev->dev, "invalid led mode: 0x%02x\n",
phydev_err(phydev, "invalid led mode: 0x%02x\n",
priv->led_mode);
priv->led_mode = -1;
}
......@@ -672,7 +673,8 @@ static int kszphy_probe(struct phy_device *phydev)
} else if (rate > 49500000 && rate < 50500000) {
priv->rmii_ref_clk_sel_val = !rmii_ref_clk_sel_25_mhz;
} else {
dev_err(&phydev->dev, "Clock rate out of range: %ld\n", rate);
phydev_err(phydev, "Clock rate out of range: %ld\n",
rate);
return -EINVAL;
}
}
......
......@@ -995,8 +995,9 @@ void phy_state_machine(struct work_struct *work)
if (err < 0)
phy_error(phydev);
dev_dbg(&phydev->dev, "PHY state change %s -> %s\n",
phy_state_to_str(old_state), phy_state_to_str(phydev->state));
phydev_dbg(phydev, "PHY state change %s -> %s\n",
phy_state_to_str(old_state),
phy_state_to_str(phydev->state));
queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
PHY_STATE_TIME * HZ);
......
......@@ -777,6 +777,12 @@ static inline int phy_read_status(struct phy_device *phydev)
return phydev->drv->read_status(phydev);
}
#define phydev_err(_phydev, format, args...) \
dev_err(&_phydev->dev, format, ##args)
#define phydev_dbg(_phydev, format, args...) \
dev_dbg(&_phydev->dev, format, ##args)
int genphy_config_init(struct phy_device *phydev);
int genphy_setup_forced(struct phy_device *phydev);
int genphy_restart_aneg(struct phy_device *phydev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment