Commit 7344f494 authored by Matthew Dharm's avatar Matthew Dharm Committed by Greg Kroah-Hartman

[PATCH] USB storage: unusual_devs fixups

This patch implements US_PR_DEVICE and US_SC_DEVICE, which have the meaning
'use the device's value -- no override'.  This should make maintance
easier, and also allow for those few devices that change their descriptors
depending on what they are connected to.

This will also print a message to help us identify entries that can be
pruned.

Finally, it removes a couple of dead flags.
parent 169671a9
...@@ -57,6 +57,8 @@ ...@@ -57,6 +57,8 @@
#define US_SC_MIN US_SC_RBC #define US_SC_MIN US_SC_RBC
#define US_SC_MAX US_SC_ISD200 #define US_SC_MAX US_SC_ISD200
#define US_SC_DEVICE 0xff /* Use device's value */
extern void usb_stor_ATAPI_command(Scsi_Cmnd*, struct us_data*); extern void usb_stor_ATAPI_command(Scsi_Cmnd*, struct us_data*);
extern void usb_stor_qic157_command(Scsi_Cmnd*, struct us_data*); extern void usb_stor_qic157_command(Scsi_Cmnd*, struct us_data*);
extern void usb_stor_ufi_command(Scsi_Cmnd*, struct us_data*); extern void usb_stor_ufi_command(Scsi_Cmnd*, struct us_data*);
......
...@@ -74,6 +74,8 @@ ...@@ -74,6 +74,8 @@
#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */ #define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
#endif #endif
#define US_PR_DEVICE 0xff /* Use device's value */
/* /*
* Bulk only data structures * Bulk only data structures
*/ */
......
...@@ -75,28 +75,26 @@ UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, ...@@ -75,28 +75,26 @@ UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au> /* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
* Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
* always fails and confuses drive; without US_FL_START_STOP, drive accesses * always fails and confuses drive.
* (read or write) all fail.
*/ */
UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113,
"Buffalo", "Buffalo",
"DUB-P40G HDD", "DUB-P40G HDD",
US_SC_SCSI, US_PR_BULK, NULL, US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY | US_FL_START_STOP), US_FL_FIX_INQUIRY ),
#ifdef CONFIG_USB_STORAGE_DPCM #ifdef CONFIG_USB_STORAGE_DPCM
UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
"Microtech", "Microtech",
"CameraMate (DPCM_USB)", "CameraMate (DPCM_USB)",
US_SC_SCSI, US_PR_DPCM_USB, NULL, US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
US_FL_START_STOP ),
#endif #endif
/* Made with the help of Edd Dumbill <edd@usefulinc.com> */ /* Made with the help of Edd Dumbill <edd@usefulinc.com> */
UNUSUAL_DEV( 0x0451, 0x5409, 0x0001, 0x0001, UNUSUAL_DEV( 0x0451, 0x5409, 0x0001, 0x0001,
"Frontier Labs", "Frontier Labs",
"Nex II Digital", "Nex II Digital",
US_SC_SCSI, US_PR_BULK, NULL, US_FL_START_STOP), US_SC_SCSI, US_PR_BULK, NULL, 0),
/* Patch submitted by Philipp Friedrich <philipp@void.at> */ /* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100, UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
...@@ -124,15 +122,6 @@ UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110, ...@@ -124,15 +122,6 @@ UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110,
"785EPX Storage", "785EPX Storage",
US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN), US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),
/* Reported by Jan Willamowius <jan@willamowius.de>
* The device needs the flags only.
*/
UNUSUAL_DEV( 0x04c8, 0x0723, 0x0000, 0x9999,
"Konica",
"KD-200Z",
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_START_STOP),
UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210, UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
"Fujifilm", "Fujifilm",
"FinePix 1400Zoom", "FinePix 1400Zoom",
...@@ -144,7 +133,7 @@ UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210, ...@@ -144,7 +133,7 @@ UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
UNUSUAL_DEV( 0x04ce, 0x0002, 0x0074, 0x0074, UNUSUAL_DEV( 0x04ce, 0x0002, 0x0074, 0x0074,
"ScanLogic", "ScanLogic",
"SL11R-IDE", "SL11R-IDE",
US_SC_SCSI, US_PR_BULK, NULL, US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY), US_FL_FIX_INQUIRY),
/* Reported by Kriston Fincher <kriston@airmail.net> /* Reported by Kriston Fincher <kriston@airmail.net>
...@@ -183,14 +172,14 @@ UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999, ...@@ -183,14 +172,14 @@ UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999,
"Sandisk", "Sandisk",
"ImageMate SDDR09", "ImageMate SDDR09",
US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
US_FL_SINGLE_LUN | US_FL_START_STOP ), US_FL_SINGLE_LUN ),
/* This entry is from Andries.Brouwer@cwi.nl */ /* This entry is from Andries.Brouwer@cwi.nl */
UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
"SCM Microsystems", "SCM Microsystems",
"eUSB SmartMedia / CompactFlash Adapter", "eUSB SmartMedia / CompactFlash Adapter",
US_SC_SCSI, US_PR_DPCM_USB, sddr09_init, US_SC_SCSI, US_PR_DPCM_USB, sddr09_init,
US_FL_START_STOP), 0),
#endif #endif
UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0205, UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0205,
...@@ -247,40 +236,40 @@ UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100, ...@@ -247,40 +236,40 @@ UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100,
"Iomega", "Iomega",
"USB Clik! 40", "USB Clik! 40",
US_SC_8070, US_PR_BULK, NULL, US_SC_8070, US_PR_BULK, NULL,
US_FL_FIX_INQUIRY | US_FL_START_STOP ), US_FL_FIX_INQUIRY ),
/* This entry is needed because the device reports Sub=ff */ /* This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450, UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
"Sony", "Sony",
"DSC-S30/S70/S75/505V/F505/F707/F717/P8", "DSC-S30/S70/S75/505V/F505/F707/F717/P8",
US_SC_SCSI, US_PR_CB, NULL, US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN | US_FL_START_STOP | US_FL_MODE_XLATE ), US_FL_SINGLE_LUN | US_FL_MODE_XLATE ),
/* Reported by wim@geeks.nl */ /* Reported by wim@geeks.nl */
UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100, UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100,
"Sony", "Sony",
"Memorystick NW-MS7", "Memorystick NW-MS7",
US_SC_UFI, US_PR_CB, NULL, US_SC_UFI, US_PR_CB, NULL,
US_FL_SINGLE_LUN | US_FL_START_STOP ), US_FL_SINGLE_LUN ),
UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100, UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100,
"Sony", "Sony",
"Memorystick MSAC-US1", "Memorystick MSAC-US1",
US_SC_UFI, US_PR_CB, NULL, US_SC_UFI, US_PR_CB, NULL,
US_FL_SINGLE_LUN | US_FL_START_STOP ), US_FL_SINGLE_LUN ),
/* Submitted by Klaus Mueller <k.mueller@intershop.de> */ /* Submitted by Klaus Mueller <k.mueller@intershop.de> */
UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310, UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310,
"Sony", "Sony",
"Handycam", "Handycam",
US_SC_SCSI, US_PR_CB, NULL, US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN | US_FL_START_STOP | US_FL_MODE_XLATE), US_FL_SINGLE_LUN | US_FL_MODE_XLATE),
UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999, UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999,
"Sony", "Sony",
"Memorystick MSC-U01N", "Memorystick MSC-U01N",
US_SC_UFI, US_PR_CB, NULL, US_SC_UFI, US_PR_CB, NULL,
US_FL_SINGLE_LUN | US_FL_START_STOP ), US_FL_SINGLE_LUN ),
/* Submitted by Nathan Babb <nathan@lexi.com> */ /* Submitted by Nathan Babb <nathan@lexi.com> */
UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999, UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999,
...@@ -316,7 +305,7 @@ UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200, ...@@ -316,7 +305,7 @@ UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200,
UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000, UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
"Pentax", "Pentax",
"Optio 2/3/400", "Optio 2/3/400",
US_SC_8070, US_PR_CBI, NULL, US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ), US_FL_FIX_INQUIRY ),
/* Submitted by Per Winkvist <per.winkvist@uk.com> */ /* Submitted by Per Winkvist <per.winkvist@uk.com> */
...@@ -380,7 +369,7 @@ UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113, ...@@ -380,7 +369,7 @@ UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113,
UNUSUAL_DEV( 0x05e3, 0x0700, 0x0000, 0xffff, UNUSUAL_DEV( 0x05e3, 0x0700, 0x0000, 0xffff,
"SIIG", "SIIG",
"CompactFlash Card Reader", "CompactFlash Card Reader",
US_SC_SCSI, US_PR_BULK, NULL, US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ), US_FL_FIX_INQUIRY ),
/* Reported by Peter Marks <peter.marks@turner.com> /* Reported by Peter Marks <peter.marks@turner.com>
...@@ -393,7 +382,7 @@ UNUSUAL_DEV( 0x05e3, 0x0700, 0x0000, 0xffff, ...@@ -393,7 +382,7 @@ UNUSUAL_DEV( 0x05e3, 0x0700, 0x0000, 0xffff,
UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0x0001, UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0x0001,
"EagleTec", "EagleTec",
"External Hard Disk", "External Hard Disk",
US_SC_SCSI, US_PR_BULK, NULL, US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ), US_FL_FIX_INQUIRY ),
UNUSUAL_DEV( 0x05e3, 0x0700, 0x0000, 0x9999, UNUSUAL_DEV( 0x05e3, 0x0700, 0x0000, 0x9999,
...@@ -412,25 +401,9 @@ UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100, ...@@ -412,25 +401,9 @@ UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100,
"Olympus", "Olympus",
"Camedia MAUSB-2", "Camedia MAUSB-2",
US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
US_FL_SINGLE_LUN | US_FL_START_STOP ), US_FL_SINGLE_LUN ),
#endif #endif
/* Submitted by kedar@centillium
* Needed for START_STOP flag, but that is unconfirmed */
UNUSUAL_DEV( 0x0686, 0x4006, 0x0001, 0x0001,
"Minolta",
"Dimage S304",
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_START_STOP ),
/* Submitted by f.brugmans@hccnet.nl
* Needed for START_STOP flag */
UNUSUAL_DEV( 0x0686, 0x4007, 0x0001, 0x0001,
"Minolta",
"Dimage S304",
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_START_STOP ),
UNUSUAL_DEV( 0x0693, 0x0002, 0x0100, 0x0100, UNUSUAL_DEV( 0x0693, 0x0002, 0x0100, 0x0100,
"Hagiwara", "Hagiwara",
"FlashGate SmartMedia", "FlashGate SmartMedia",
...@@ -445,13 +418,12 @@ UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200, ...@@ -445,13 +418,12 @@ UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
"Sandisk", "Sandisk",
"ImageMate SDDR-05a", "ImageMate SDDR-05a",
US_SC_SCSI, US_PR_CB, NULL, US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN | US_FL_START_STOP), US_FL_SINGLE_LUN ),
UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009, UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009,
"Sandisk", "Sandisk",
"ImageMate SDDR-31", "ImageMate SDDR-31",
US_SC_SCSI, US_PR_BULK, NULL, US_SC_SCSI, US_PR_BULK, NULL, 0 ),
US_FL_IGNORE_SER),
UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
"Sandisk", "Sandisk",
...@@ -464,7 +436,7 @@ UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999, ...@@ -464,7 +436,7 @@ UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999,
"Sandisk", "Sandisk",
"ImageMate SDDR-09", "ImageMate SDDR-09",
US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
US_FL_SINGLE_LUN | US_FL_START_STOP ), US_FL_SINGLE_LUN ),
#endif #endif
#ifdef CONFIG_USB_STORAGE_FREECOM #ifdef CONFIG_USB_STORAGE_FREECOM
...@@ -490,8 +462,7 @@ UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, ...@@ -490,8 +462,7 @@ UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
"Microtech", "Microtech",
"CameraMate (DPCM_USB)", "CameraMate (DPCM_USB)",
US_SC_SCSI, US_PR_DPCM_USB, NULL, US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
US_FL_START_STOP ),
#endif #endif
#ifdef CONFIG_USB_STORAGE_DATAFAB #ifdef CONFIG_USB_STORAGE_DATAFAB
...@@ -568,7 +539,7 @@ UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999, ...@@ -568,7 +539,7 @@ UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff,
"Datafab", "Datafab",
"KECF-USB", "KECF-USB",
US_SC_SCSI, US_PR_BULK, NULL, US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ), US_FL_FIX_INQUIRY ),
/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
...@@ -629,20 +600,7 @@ UNUSUAL_DEV( 0x1065, 0x2136, 0x0000, 0x0001, ...@@ -629,20 +600,7 @@ UNUSUAL_DEV( 0x1065, 0x2136, 0x0000, 0x0001,
"Global Channel Solutions", "Global Channel Solutions",
"EasyDisk EDxxxx", "EasyDisk EDxxxx",
US_SC_SCSI, US_PR_BULK, NULL, US_SC_SCSI, US_PR_BULK, NULL,
US_FL_MODE_XLATE | US_FL_START_STOP | US_FL_FIX_INQUIRY ), US_FL_MODE_XLATE | US_FL_FIX_INQUIRY ),
/* Submitted by Brian Hall <brihall@pcisys.net>
* Needed for START_STOP flag */
UNUSUAL_DEV( 0x0c76, 0x0003, 0x0100, 0x0100,
"JMTek",
"USBDrive",
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_START_STOP ),
UNUSUAL_DEV( 0x0c76, 0x0005, 0x0100, 0x0100,
"JMTek",
"USBDrive",
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_START_STOP ),
/* Reported by Dan Pilone <pilone@slac.com> /* Reported by Dan Pilone <pilone@slac.com>
* The device needs the flags only. * The device needs the flags only.
...@@ -652,8 +610,8 @@ UNUSUAL_DEV( 0x0c76, 0x0005, 0x0100, 0x0100, ...@@ -652,8 +610,8 @@ UNUSUAL_DEV( 0x0c76, 0x0005, 0x0100, 0x0100,
UNUSUAL_DEV( 0x1065, 0x2136, 0x0000, 0x9999, UNUSUAL_DEV( 0x1065, 0x2136, 0x0000, 0x9999,
"CCYU TECHNOLOGY", "CCYU TECHNOLOGY",
"EasyDisk Portable Device", "EasyDisk Portable Device",
US_SC_SCSI, US_PR_BULK, NULL, US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MODE_XLATE | US_FL_START_STOP), US_FL_MODE_XLATE ),
#ifdef CONFIG_USB_STORAGE_SDDR55 #ifdef CONFIG_USB_STORAGE_SDDR55
UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999, UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999,
...@@ -670,5 +628,5 @@ UNUSUAL_DEV( 0x08ca, 0x2011, 0x0000, 0x9999, ...@@ -670,5 +628,5 @@ UNUSUAL_DEV( 0x08ca, 0x2011, 0x0000, 0x9999,
"AIPTEK", "AIPTEK",
"PocketCAM 3Mega", "PocketCAM 3Mega",
US_SC_SCSI, US_PR_BULK, NULL, US_SC_SCSI, US_PR_BULK, NULL,
US_FL_MODE_XLATE | US_FL_START_STOP), US_FL_MODE_XLATE ),
...@@ -102,8 +102,6 @@ static void storage_disconnect(struct usb_interface *iface); ...@@ -102,8 +102,6 @@ static void storage_disconnect(struct usb_interface *iface);
/* The entries in this table, except for final ones here /* The entries in this table, except for final ones here
* (USB_MASS_STORAGE_CLASS and the empty entry), correspond, * (USB_MASS_STORAGE_CLASS and the empty entry), correspond,
* line for line with the entries of us_unsuaul_dev_list[]. * line for line with the entries of us_unsuaul_dev_list[].
* For now, we duplicate idVendor and idProduct in us_unsual_dev_list,
* just to avoid alignment bugs.
*/ */
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
...@@ -353,7 +351,7 @@ static int usb_stor_control_thread(void * __us) ...@@ -353,7 +351,7 @@ static int usb_stor_control_thread(void * __us)
*/ */
else if (us->srb->device->id && else if (us->srb->device->id &&
!(us->flags & US_FL_SCM_MULT_TARG)) { !(us->flags & US_FL_SCM_MULT_TARG)) {
US_DEBUGP("Bad target number (%d/%d)\n", US_DEBUGP("Bad target number (%d:%d)\n",
us->srb->device->id, us->srb->device->lun); us->srb->device->id, us->srb->device->lun);
us->srb->result = DID_BAD_TARGET << 16; us->srb->result = DID_BAD_TARGET << 16;
} }
...@@ -424,10 +422,13 @@ static int usb_stor_control_thread(void * __us) ...@@ -424,10 +422,13 @@ static int usb_stor_control_thread(void * __us)
***********************************************************************/ ***********************************************************************/
/* Get the unusual_devs entries and the string descriptors */ /* Get the unusual_devs entries and the string descriptors */
static void get_device_info(struct us_data *us, static void get_device_info(struct us_data *us, int id_index)
struct us_unusual_dev *unusual_dev)
{ {
struct usb_device *dev = us->pusb_dev; struct usb_device *dev = us->pusb_dev;
struct usb_host_interface *altsetting =
&us->pusb_intf->altsetting[us->pusb_intf->act_altsetting];
struct us_unusual_dev *unusual_dev = &us_unusual_dev_list[id_index];
struct usb_device_id *id = &storage_usb_ids[id_index];
if (unusual_dev->vendorName) if (unusual_dev->vendorName)
US_DEBUGP("Vendor: %s\n", unusual_dev->vendorName); US_DEBUGP("Vendor: %s\n", unusual_dev->vendorName);
...@@ -436,10 +437,40 @@ static void get_device_info(struct us_data *us, ...@@ -436,10 +437,40 @@ static void get_device_info(struct us_data *us,
/* Store the entries */ /* Store the entries */
us->unusual_dev = unusual_dev; us->unusual_dev = unusual_dev;
us->subclass = unusual_dev->useProtocol; us->subclass = (unusual_dev->useProtocol == US_SC_DEVICE) ?
us->protocol = unusual_dev->useTransport; altsetting->desc.bInterfaceSubClass :
unusual_dev->useProtocol;
us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ?
altsetting->desc.bInterfaceProtocol :
unusual_dev->useTransport;
us->flags = unusual_dev->flags; us->flags = unusual_dev->flags;
/* Log a message if a non-generic unusual_dev entry contains an
* unnecessary subclass or protocol override. This may stimulate
* reports from users that will help us remove unneeded entries
* from the unusual_devs.h table.
*/
if (id->idVendor || id->idProduct) {
static char *msgs[3] = {
"an unneeded SubClass entry",
"an unneeded Protocol entry",
"unneeded SubClass and Protocol entries"};
int msg = -1;
if (unusual_dev->useProtocol != US_SC_DEVICE &&
us->subclass == altsetting->desc.bInterfaceSubClass)
msg += 1;
if (unusual_dev->useTransport != US_PR_DEVICE &&
us->protocol == altsetting->desc.bInterfaceProtocol)
msg += 2;
if (msg >= 0)
printk(KERN_NOTICE USB_STORAGE "This device "
"(%04x,%04x) has %s in unusual_devs.h\n"
" Please send a copy of this message to "
"<linux-usb-devel@lists.sourceforge.net>\n",
id->idVendor, id->idProduct, msgs[msg]);
}
/* Read the device's string descriptors */ /* Read the device's string descriptors */
if (dev->descriptor.iManufacturer) if (dev->descriptor.iManufacturer)
usb_string(dev, dev->descriptor.iManufacturer, usb_string(dev, dev->descriptor.iManufacturer,
...@@ -843,7 +874,7 @@ static int storage_probe(struct usb_interface *intf, ...@@ -843,7 +874,7 @@ static int storage_probe(struct usb_interface *intf,
* of the match from the usb_device_id table, so we can find the * of the match from the usb_device_id table, so we can find the
* corresponding entry in the private table. * corresponding entry in the private table.
*/ */
get_device_info(us, &us_unusual_dev_list[id_index]); get_device_info(us, id_index);
#ifdef CONFIG_USB_STORAGE_SDDR09 #ifdef CONFIG_USB_STORAGE_SDDR09
if (us->protocol == US_PR_EUSB_SDDR09 || if (us->protocol == US_PR_EUSB_SDDR09 ||
......
...@@ -71,8 +71,6 @@ struct us_unusual_dev { ...@@ -71,8 +71,6 @@ struct us_unusual_dev {
#define US_FL_SINGLE_LUN 0x00000001 /* allow access to only LUN 0 */ #define US_FL_SINGLE_LUN 0x00000001 /* allow access to only LUN 0 */
#define US_FL_MODE_XLATE 0x00000002 /* translate _6 to _10 commands for #define US_FL_MODE_XLATE 0x00000002 /* translate _6 to _10 commands for
Win/MacOS compatibility */ Win/MacOS compatibility */
#define US_FL_START_STOP 0x00000004 /* ignore START_STOP commands */
#define US_FL_IGNORE_SER 0x00000010 /* Ignore the serial number given */
#define US_FL_SCM_MULT_TARG 0x00000020 /* supports multiple targets */ #define US_FL_SCM_MULT_TARG 0x00000020 /* supports multiple targets */
#define US_FL_FIX_INQUIRY 0x00000040 /* INQUIRY response needs fixing */ #define US_FL_FIX_INQUIRY 0x00000040 /* INQUIRY response needs fixing */
#define US_FL_FIX_CAPACITY 0x00000080 /* READ CAPACITY response too big */ #define US_FL_FIX_CAPACITY 0x00000080 /* READ CAPACITY response too big */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment