ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk

Pioneer DJ DJM-250MK2 is a mixer that acts like a USB sound card.
The MIDI controller part is standard but the PCM part is "vendor specific".
Output is enabled by this quirk: 8 channels, 48 000 Hz, S24_3LE.
Input is not working.
Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Link: https://lore.kernel.org/r/20200401095907.3387-1-konference@frantovo.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

sound/usb/quirks-table.h

@@ -3592,5 +3592,47 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
 		}
 	}
 },
+{
+	/*
+	 * Pioneer DJ DJM-250MK2
+	 * PCM is 8 channels out @ 48 fixed (endpoints 0x01).
+	 * The output from computer to the mixer is usable.
+	 *
+	 * The input (phono or line to computer) is not working.
+	 * It should be at endpoint 0x82 and probably also 8 channels,
+	 * but it seems that it works only with Pioneer proprietary software.
+	 * Even on officially supported OS, the Audacity was unable to record
+	 * and Mixxx to recognize the control vinyls.
+	 */
+	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0017),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
+					.channels = 8, // outputs
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x01,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC|
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) { 48000 }
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 
 #undef USB_DEVICE_VENDOR_SPEC