Commit 745b6847 authored by Xiang Chen's avatar Xiang Chen Committed by Martin K. Petersen

scsi: hisi_sas: Relocate some codes to avoid an unused check

In function hisi_sas_task_prep(), we check asd_sas_port, but in function
hisi_sas_task_exec(), we already refer to asd_sas_port by using function
dev_to_hisi_hba() implicitly. So to avoid this possible invalid
dereference, relocate the check to function hisi_sas_task_prep().
Signed-off-by: default avatarXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 37359798
...@@ -302,36 +302,19 @@ static int hisi_sas_task_prep(struct sas_task *task, ...@@ -302,36 +302,19 @@ static int hisi_sas_task_prep(struct sas_task *task,
int *pass) int *pass)
{ {
struct domain_device *device = task->dev; struct domain_device *device = task->dev;
struct hisi_hba *hisi_hba; struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
struct hisi_sas_device *sas_dev = device->lldd_dev; struct hisi_sas_device *sas_dev = device->lldd_dev;
struct hisi_sas_port *port; struct hisi_sas_port *port;
struct hisi_sas_slot *slot; struct hisi_sas_slot *slot;
struct hisi_sas_cmd_hdr *cmd_hdr_base; struct hisi_sas_cmd_hdr *cmd_hdr_base;
struct asd_sas_port *sas_port = device->port; struct asd_sas_port *sas_port = device->port;
struct device *dev; struct device *dev = hisi_hba->dev;
int dlvry_queue_slot, dlvry_queue, rc, slot_idx; int dlvry_queue_slot, dlvry_queue, rc, slot_idx;
int n_elem = 0, n_elem_req = 0, n_elem_resp = 0; int n_elem = 0, n_elem_req = 0, n_elem_resp = 0;
struct hisi_sas_dq *dq; struct hisi_sas_dq *dq;
unsigned long flags; unsigned long flags;
int wr_q_index; int wr_q_index;
if (!sas_port) {
struct task_status_struct *ts = &task->task_status;
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_PHY_DOWN;
/*
* libsas will use dev->port, should
* not call task_done for sata
*/
if (device->dev_type != SAS_SATA_DEV)
task->task_done(task);
return -ECOMM;
}
hisi_hba = dev_to_hisi_hba(device);
dev = hisi_hba->dev;
if (DEV_IS_GONE(sas_dev)) { if (DEV_IS_GONE(sas_dev)) {
if (sas_dev) if (sas_dev)
dev_info(dev, "task prep: device %d not ready\n", dev_info(dev, "task prep: device %d not ready\n",
...@@ -506,10 +489,29 @@ static int hisi_sas_task_exec(struct sas_task *task, gfp_t gfp_flags, ...@@ -506,10 +489,29 @@ static int hisi_sas_task_exec(struct sas_task *task, gfp_t gfp_flags,
u32 rc; u32 rc;
u32 pass = 0; u32 pass = 0;
unsigned long flags; unsigned long flags;
struct hisi_hba *hisi_hba = dev_to_hisi_hba(task->dev); struct hisi_hba *hisi_hba;
struct device *dev = hisi_hba->dev; struct device *dev;
struct domain_device *device = task->dev;
struct asd_sas_port *sas_port = device->port;
struct hisi_sas_dq *dq = NULL; struct hisi_sas_dq *dq = NULL;
if (!sas_port) {
struct task_status_struct *ts = &task->task_status;
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_PHY_DOWN;
/*
* libsas will use dev->port, should
* not call task_done for sata
*/
if (device->dev_type != SAS_SATA_DEV)
task->task_done(task);
return -ECOMM;
}
hisi_hba = dev_to_hisi_hba(device);
dev = hisi_hba->dev;
if (unlikely(test_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags))) { if (unlikely(test_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags))) {
if (in_softirq()) if (in_softirq())
return -EINVAL; return -EINVAL;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment