Commit 746dca0a authored by Cheng-Yi Chiang's avatar Cheng-Yi Chiang Committed by Mark Brown

ASoC: rt5663: Fix error handling of regulator_set_load

The default implementation of regulator_set_load returns
REGULATOR_MODE_NORMAL, which is positive.  [This was a bug which is
being fixed but the change is valid anyway -- bronie]

rt5663_i2c_probe should only do error handling when return value of
regulator_set_load is negative.
In this case, rt5663_i2c_probe should return error.

Also, consolidate err_irq into err_enable.

Fix the missing goto for temporary regmap and rt5663->regmap.
Signed-off-by: default avatarCheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 00347e4e
......@@ -3525,10 +3525,11 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
for (i = 0; i < ARRAY_SIZE(rt5663->supplies); i++) {
ret = regulator_set_load(rt5663->supplies[i].consumer,
RT5663_SUPPLY_CURRENT_UA);
if (ret) {
if (ret < 0) {
dev_err(&i2c->dev,
"Failed to set regulator %s, ret: %d\n",
"Failed to set regulator load on %s, ret: %d\n",
rt5663->supplies[i].supply, ret);
return ret;
}
}
......@@ -3546,7 +3547,7 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
ret = PTR_ERR(regmap);
dev_err(&i2c->dev, "Failed to allocate temp register map: %d\n",
ret);
return ret;
goto err_enable;
}
ret = regmap_read(regmap, RT5663_VENDOR_ID_2, &val);
......@@ -3579,7 +3580,7 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
ret = PTR_ERR(rt5663->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
goto err_enable;
}
/* reset and calibrate */
......@@ -3689,17 +3690,19 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
rt5663_dai, ARRAY_SIZE(rt5663_dai));
if (ret)
goto err_irq;
goto err_enable;
return 0;
err_irq:
/*
* Error after enabling regulators should goto err_enable
* to disable regulators.
*/
err_enable:
if (i2c->irq)
free_irq(i2c->irq, rt5663);
err_enable:
dev_err(&i2c->dev,
"%s: Disable regulator after probe error\n", __func__);
regulator_bulk_disable(ARRAY_SIZE(rt5663->supplies), rt5663->supplies);
return ret;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment