Commit 74fe0305 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: Set flag DOCK_UNDOCKING when triggered via sysfs
  Revert "ACPI: video: Ignore devices that aren't present in hardware"
  asus_acpi: remove misleading mask
  Revert "ACPI: video: Ignore ACPI video devices that aren't present in hardware"
  thermal: delete "default y"
  thermal: re-document thermal units
  Revert "thermal: fix generic thermal I/F for hwmon"
  ACPI: fix ATA_ACPI build
  ACPI: battery: Don't return -EFAIL on broken packages.
  ACPI: lockdep warning on boot, 2.6.25-rc5
parents fb00f762 13d93924
......@@ -610,7 +610,7 @@ write_led(const char __user * buffer, unsigned long count,
(led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask);
if (invert) /* invert target value */
led_out = !led_out & 0x1;
led_out = !led_out;
if (!write_acpi_int(hotk->handle, ledname, led_out, NULL))
printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n",
......
......@@ -293,13 +293,12 @@ static int extract_package(struct acpi_battery *battery,
strncpy(ptr, (u8 *)&element->integer.value,
sizeof(acpi_integer));
ptr[sizeof(acpi_integer)] = 0;
} else return -EFAULT;
} else
*ptr = 0; /* don't have value */
} else {
if (element->type == ACPI_TYPE_INTEGER) {
int *x = (int *)((u8 *)battery +
offsets[i].offset);
*x = element->integer.value;
} else return -EFAULT;
int *x = (int *)((u8 *)battery + offsets[i].offset);
*x = (element->type == ACPI_TYPE_INTEGER) ?
element->integer.value : -1;
}
}
return 0;
......
......@@ -710,6 +710,7 @@ static ssize_t write_undock(struct device *dev, struct device_attribute *attr,
if (!count)
return -EINVAL;
begin_undock(dock_station);
ret = handle_eject_request(dock_station, ACPI_NOTIFY_EJECT_REQUEST);
return ret ? ret: count;
}
......
......@@ -216,8 +216,10 @@ static void acpi_safe_halt(void)
* test NEED_RESCHED:
*/
smp_mb();
if (!need_resched())
if (!need_resched()) {
safe_halt();
local_irq_disable();
}
current_thread_info()->status |= TS_POLLING;
}
......@@ -421,7 +423,9 @@ static void acpi_processor_idle(void)
else
acpi_safe_halt();
if (irqs_disabled())
local_irq_enable();
return;
}
......@@ -530,7 +534,9 @@ static void acpi_processor_idle(void)
* skew otherwise.
*/
sleep_ticks = 0xFFFFFFFF;
if (irqs_disabled())
local_irq_enable();
break;
case ACPI_STATE_C2:
......
......@@ -807,40 +807,11 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
static int acpi_video_bus_check(struct acpi_video_bus *video)
{
acpi_status status = -ENOENT;
long device_id;
struct device *dev;
struct acpi_device *device;
if (!video)
return -EINVAL;
device = video->device;
status =
acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id);
if (!ACPI_SUCCESS(status))
return -ENODEV;
/* We need to attempt to determine whether the _ADR refers to a
PCI device or not. There's no terribly good way to do this,
so the best we can hope for is to assume that there'll never
be a video device in the host bridge */
if (device_id >= 0x10000) {
/* It looks like a PCI device. Does it exist? */
dev = acpi_get_physical_device(device->handle);
} else {
/* It doesn't look like a PCI device. Does its parent
exist? */
acpi_handle phandle;
if (acpi_get_parent(device->handle, &phandle))
return -ENODEV;
dev = acpi_get_physical_device(phandle);
}
if (!dev)
return -ENODEV;
put_device(dev);
/* Since there is no HID, CID and so on for VGA driver, we have
* to check well known required nodes.
*/
......@@ -1366,37 +1337,8 @@ acpi_video_bus_write_DOS(struct file *file,
static int acpi_video_bus_add_fs(struct acpi_device *device)
{
long device_id;
int status;
struct proc_dir_entry *entry = NULL;
struct acpi_video_bus *video;
struct device *dev;
status =
acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id);
if (!ACPI_SUCCESS(status))
return -ENODEV;
/* We need to attempt to determine whether the _ADR refers to a
PCI device or not. There's no terribly good way to do this,
so the best we can hope for is to assume that there'll never
be a video device in the host bridge */
if (device_id >= 0x10000) {
/* It looks like a PCI device. Does it exist? */
dev = acpi_get_physical_device(device->handle);
} else {
/* It doesn't look like a PCI device. Does its parent
exist? */
acpi_handle phandle;
if (acpi_get_parent(device->handle, &phandle))
return -ENODEV;
dev = acpi_get_physical_device(phandle);
}
if (!dev)
return -ENODEV;
put_device(dev);
video = acpi_driver_data(device);
......
......@@ -30,6 +30,7 @@ config ATA_NONSTANDARD
config ATA_ACPI
bool
depends on ACPI && PCI
select ACPI_DOCK
default y
help
This option adds support for ATA-related ACPI objects.
......
......@@ -4,8 +4,6 @@
menuconfig THERMAL
bool "Generic Thermal sysfs driver"
select HWMON
default y
help
Generic Thermal Sysfs driver offers a generic mechanism for
thermal management. Usually it's made up of one or more thermal
......
......@@ -30,10 +30,8 @@
#include <linux/idr.h>
#include <linux/thermal.h>
#include <linux/spinlock.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
MODULE_AUTHOR("Zhang Rui");
MODULE_AUTHOR("Zhang Rui")
MODULE_DESCRIPTION("Generic thermal management sysfs support");
MODULE_LICENSE("GPL");
......@@ -58,9 +56,6 @@ static LIST_HEAD(thermal_tz_list);
static LIST_HEAD(thermal_cdev_list);
static DEFINE_MUTEX(thermal_list_lock);
static struct device *thermal_hwmon;
#define MAX_THERMAL_ZONES 10
static int get_idr(struct idr *idr, struct mutex *lock, int *id)
{
int err;
......@@ -92,67 +87,7 @@ static void release_idr(struct idr *idr, struct mutex *lock, int id)
mutex_unlock(lock);
}
/* hwmon sys I/F*/
static ssize_t
name_show(struct device *dev, struct device_attribute *attr, char *buf)
{
return sprintf(buf, "thermal_sys_class\n");
}
static ssize_t
temp_input_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz;
struct sensor_device_attribute *sensor_attr
= to_sensor_dev_attr(attr);
list_for_each_entry(tz, &thermal_tz_list, node)
if (tz->id == sensor_attr->index)
return tz->ops->get_temp(tz, buf);
return -ENODEV;
}
static ssize_t
temp_crit_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz;
struct sensor_device_attribute *sensor_attr
= to_sensor_dev_attr(attr);
list_for_each_entry(tz, &thermal_tz_list, node)
if (tz->id == sensor_attr->index)
return tz->ops->get_trip_temp(tz, 0, buf);
return -ENODEV;
}
static DEVICE_ATTR(name, 0444, name_show, NULL);
static struct sensor_device_attribute sensor_attrs[] = {
SENSOR_ATTR(temp1_input, 0444, temp_input_show, NULL, 0),
SENSOR_ATTR(temp1_crit, 0444, temp_crit_show, NULL, 0),
SENSOR_ATTR(temp2_input, 0444, temp_input_show, NULL, 1),
SENSOR_ATTR(temp2_crit, 0444, temp_crit_show, NULL, 1),
SENSOR_ATTR(temp3_input, 0444, temp_input_show, NULL, 2),
SENSOR_ATTR(temp3_crit, 0444, temp_crit_show, NULL, 2),
SENSOR_ATTR(temp4_input, 0444, temp_input_show, NULL, 3),
SENSOR_ATTR(temp4_crit, 0444, temp_crit_show, NULL, 3),
SENSOR_ATTR(temp5_input, 0444, temp_input_show, NULL, 4),
SENSOR_ATTR(temp5_crit, 0444, temp_crit_show, NULL, 4),
SENSOR_ATTR(temp6_input, 0444, temp_input_show, NULL, 5),
SENSOR_ATTR(temp6_crit, 0444, temp_crit_show, NULL, 5),
SENSOR_ATTR(temp7_input, 0444, temp_input_show, NULL, 6),
SENSOR_ATTR(temp7_crit, 0444, temp_crit_show, NULL, 6),
SENSOR_ATTR(temp8_input, 0444, temp_input_show, NULL, 7),
SENSOR_ATTR(temp8_crit, 0444, temp_crit_show, NULL, 7),
SENSOR_ATTR(temp9_input, 0444, temp_input_show, NULL, 8),
SENSOR_ATTR(temp9_crit, 0444, temp_crit_show, NULL, 8),
SENSOR_ATTR(temp10_input, 0444, temp_input_show, NULL, 9),
SENSOR_ATTR(temp10_crit, 0444, temp_crit_show, NULL, 9),
};
/* thermal zone sys I/F */
/* sys I/F for thermal zone */
#define to_thermal_zone(_dev) \
container_of(_dev, struct thermal_zone_device, device)
......@@ -279,7 +214,7 @@ do { \
device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]); \
} while (0)
/* cooling device sys I/F */
/* sys I/F for cooling device */
#define to_cooling_device(_dev) \
container_of(_dev, struct thermal_cooling_device, device)
......@@ -512,9 +447,6 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type,
struct thermal_zone_device *pos;
int result;
if (!type)
return ERR_PTR(-EINVAL);
if (strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
......@@ -545,9 +477,11 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type,
}
/* sys I/F */
if (type) {
result = device_create_file(&cdev->device, &dev_attr_cdev_type);
if (result)
goto unregister;
}
result = device_create_file(&cdev->device, &dev_attr_max_state);
if (result)
......@@ -613,7 +547,7 @@ void thermal_cooling_device_unregister(struct
tz->ops->unbind(tz, cdev);
}
mutex_unlock(&thermal_list_lock);
if (cdev->type[0])
device_remove_file(&cdev->device, &dev_attr_cdev_type);
device_remove_file(&cdev->device, &dev_attr_max_state);
device_remove_file(&cdev->device, &dev_attr_cur_state);
......@@ -646,9 +580,6 @@ struct thermal_zone_device *thermal_zone_device_register(char *type,
int result;
int count;
if (!type)
return ERR_PTR(-EINVAL);
if (strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
......@@ -670,13 +601,6 @@ struct thermal_zone_device *thermal_zone_device_register(char *type,
kfree(tz);
return ERR_PTR(result);
}
if (tz->id >= MAX_THERMAL_ZONES) {
printk(KERN_ERR PREFIX
"Too many thermal zones\n");
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
kfree(tz);
return ERR_PTR(-EINVAL);
}
strcpy(tz->type, type);
tz->ops = ops;
......@@ -691,27 +615,12 @@ struct thermal_zone_device *thermal_zone_device_register(char *type,
return ERR_PTR(result);
}
/* hwmon sys I/F */
result = device_create_file(thermal_hwmon,
&sensor_attrs[tz->id * 2].dev_attr);
if (result)
goto unregister;
if (trips > 0) {
char buf[40];
result = tz->ops->get_trip_type(tz, 0, buf);
if (result > 0 && !strcmp(buf, "critical\n")) {
result = device_create_file(thermal_hwmon,
&sensor_attrs[tz->id * 2 + 1].dev_attr);
if (result)
goto unregister;
}
}
/* sys I/F */
if (type) {
result = device_create_file(&tz->device, &dev_attr_type);
if (result)
goto unregister;
}
result = device_create_file(&tz->device, &dev_attr_temp);
if (result)
......@@ -778,16 +687,7 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
tz->ops->unbind(tz, cdev);
mutex_unlock(&thermal_list_lock);
device_remove_file(thermal_hwmon,
&sensor_attrs[tz->id * 2].dev_attr);
if (tz->trips > 0) {
char buf[40];
if (tz->ops->get_trip_type(tz, 0, buf) > 0)
if (!strcmp(buf, "critical\n"))
device_remove_file(thermal_hwmon,
&sensor_attrs[tz->id * 2 + 1].dev_attr);
}
if (tz->type[0])
device_remove_file(&tz->device, &dev_attr_type);
device_remove_file(&tz->device, &dev_attr_temp);
if (tz->ops->get_mode)
......@@ -805,19 +705,6 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
EXPORT_SYMBOL(thermal_zone_device_unregister);
static void thermal_exit(void)
{
if (thermal_hwmon) {
device_remove_file(thermal_hwmon, &dev_attr_name);
hwmon_device_unregister(thermal_hwmon);
}
class_unregister(&thermal_class);
idr_destroy(&thermal_tz_idr);
idr_destroy(&thermal_cdev_idr);
mutex_destroy(&thermal_idr_lock);
mutex_destroy(&thermal_list_lock);
}
static int __init thermal_init(void)
{
int result = 0;
......@@ -829,20 +716,16 @@ static int __init thermal_init(void)
mutex_destroy(&thermal_idr_lock);
mutex_destroy(&thermal_list_lock);
}
thermal_hwmon = hwmon_device_register(NULL);
if (IS_ERR(thermal_hwmon)) {
result = PTR_ERR(thermal_hwmon);
thermal_hwmon = NULL;
printk(KERN_ERR PREFIX
"unable to register hwmon device\n");
thermal_exit();
return result;
}
result = device_create_file(thermal_hwmon, &dev_attr_name);
}
return result;
static void __exit thermal_exit(void)
{
class_unregister(&thermal_class);
idr_destroy(&thermal_tz_idr);
idr_destroy(&thermal_cdev_idr);
mutex_destroy(&thermal_idr_lock);
mutex_destroy(&thermal_list_lock);
}
subsys_initcall(thermal_init);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment