Commit 75a0ef14 authored by Jade Bilkey's avatar Jade Bilkey Committed by Greg Kroah-Hartman

staging: silicom: 80 character and tab formatting in libbp_sd.h

Fixes 80+ character limit warnings from checkpatch.pl
Changes aesthetics of spaces and tabs where appropriate.
Signed-off-by: default avatarJade Bilkey <herself@thefumon.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent c509fdd9
......@@ -39,53 +39,70 @@ int get_bypass_slave_sd(int if_index);
* @if_index: network device index
*
* Output:
* flags word on success;flag word is a 32-bit mask word with each bit defines different
* capability as described bellow.
* flags word on success;flag word is a 32-bit mask word with each bit defines
* different capability as described bellow.
* Value of 1 for supporting this feature. 0 for not supporting this feature.
* -1 - on failure (if the device is not capable of the operation or not a Bypass device)
* -1 - on failure (if the device is not capable of the operation or not a
* Bypass device)
* Bit feature description
*
* 0 BP_CAP The interface is Bypass capable in general
*
* 1 BP_STATUS_CAP The interface can report of the current Bypass mode
* 1 BP_STATUS_CAP The interface can report of the current Bypass
* mode
*
* 2 BP_STATUS_CHANGE_CAP The interface can report on a change to bypass mode from
* the last time the mode was defined
* 2 BP_STATUS_CHANGE_CAP The interface can report on a change to bypass
* mode from the last time the mode was defined
*
* 3 SW_CTL_CAP The interface is Software controlled capable for bypass/non bypass modes.
* 3 SW_CTL_CAP The interface is Software controlled capable for
* bypass/non bypass modes.
*
* 4 BP_DIS_CAP The interface is capable of disabling the Bypass mode at all times.
* This mode will retain its mode even during power loss and also after
* power recovery. This will overcome on any bypass operation due to
* watchdog timeout or set bypass command.
* 4 BP_DIS_CAP The interface is capable of disabling the Bypass
* mode at all times. This mode will retain its
* mode even during power loss and also after power
* recovery. This will overcome on any bypass
* operation due to watchdog timeout or set bypass
* command.
*
* 5 BP_DIS_STATUS_CAP The interface can report of the current DIS_BP_CAP
* 5 BP_DIS_STATUS_CAP The interface can report of the current
* DIS_BP_CAP
*
* 6 STD_NIC_CAP The interface is capable to be configured to operate as standard, non Bypass,
* NIC interface (have direct connection to interfaces at all power modes)
* 6 STD_NIC_CAP The interface is capable to be configured to
* operate as standard, non Bypass, NIC interface
* (have direct connection to interfaces at all
* power modes)
*
* 7 BP_PWOFF_NO_CAP The interface can be in Bypass mode at power off state
* 7 BP_PWOFF_NO_CAP The interface can be in Bypass mode at power off
* state
*
* 8 BP_PWOFF_OFF_CAP The interface can disconnect the Bypass mode at power off state without
* effecting all the other states of operation
* 8 BP_PWOFF_OFF_CAP The interface can disconnect the Bypass mode at
* power off state without effecting all the other
* states of operation
*
* 9 BP_PWOFF_CTL_CAP The behavior of the Bypass mode at Power-off state can be controlled by
* software without effecting any other state
* 9 BP_PWOFF_CTL_CAP The behavior of the Bypass mode at Power-off
* state can be controlled by software without
* effecting any other state
*
*10 BP_PWUP_ON_CAP The interface can be in Bypass mode when power is turned on
* (until the system take control of the bypass functionality)
*10 BP_PWUP_ON_CAP The interface can be in Bypass mode when power
* is turned on (until the system take control of
* the bypass functionality)
*
*11 BP_PWUP_OFF_CAP The interface can disconnect from Bypass mode when power is turned on
* (until the system take control of the bypass functionality)
*11 BP_PWUP_OFF_CAP The interface can disconnect from Bypass mode
* when power is turned on (until the system take
* control of the bypass functionality)
*
*12 BP_PWUP_CTL_CAP The behavior of the Bypass mode at Power-up can be controlled by software
*12 BP_PWUP_CTL_CAP The behavior of the Bypass mode at Power-up can
* be controlled by software
*
*13 WD_CTL_CAP The interface has watchdog capabilities to turn to Bypass mode when not reset
* for defined period of time.
*13 WD_CTL_CAP The interface has watchdog capabilities to turn
* to Bypass mode when not reset for defined period
* of time.
*
*14 WD_STATUS_CAP The interface can report on the watchdog status (Active/inactive)
*14 WD_STATUS_CAP The interface can report on the watchdog status
* (Active/inactive)
*
*15 WD_TIMEOUT_CAP The interface can report the time left till watchdog triggers to Bypass mode.
*15 WD_TIMEOUT_CAP The interface can report the time left till
* watchdog triggers to Bypass mode.
*
*16-31 RESERVED
*
......@@ -108,7 +125,8 @@ int get_bypass_caps_sd(int if_index);
*
* 4 WD_STEP_TIME The steps of the WD timer in
* 0 - for linear steps (WD_MIN_TIME * X)
* 1 - for multiply by 2 from previous step (WD_MIN_TIME * 2^X)
* 1 - for multiply by 2 from previous step
* (WD_MIN_TIME * 2^X)
*
* 5-8 WD_STEP_COUNT Number of steps the WD timer supports in 2^X
* (X bit available for defining the value)
......@@ -152,8 +170,8 @@ int get_bypass_change_sd(int if_index);
* @dis_bypass: disable bypass(1=dis, 0=en)
* Output:
* 0 - on success
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not support
* Bypass or it's a slave device)
**/
int set_dis_bypass_sd(int if_index, int dis_bypass);
......@@ -162,8 +180,8 @@ int set_dis_bypass_sd(int if_index, int dis_bypass);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - on success (normal Bypass mode/ Disable bypass)
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not support
* Bypass or it's a slave device)
**/
int get_dis_bypass_sd(int if_index);
......@@ -173,8 +191,8 @@ int get_dis_bypass_sd(int if_index);
* @bypass_mode: bypass mode setting at power off state (1=BP en, 0=BP Dis)
* Output:
* 0 - on success
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not support
* Bypass or it's a slave device)
**/
int set_bypass_pwoff_sd(int if_index, int bypass_mode);
......@@ -183,8 +201,8 @@ int set_bypass_pwoff_sd(int if_index, int bypass_mode);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - on success (Disable bypass at power off state / normal Bypass mode)
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not support
* Bypass or it's a slave device)
**/
int get_bypass_pwoff_sd(int if_index);
......@@ -194,8 +212,8 @@ int get_bypass_pwoff_sd(int if_index);
* @bypass_mode: bypass mode setting at power up state (1=BP en, 0=BP Dis)
* Output:
* 0 - on success
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not support
* Bypass or it's a slave device)
**/
int set_bypass_pwup_sd(int if_index, int bypass_mode);
......@@ -204,21 +222,22 @@ int set_bypass_pwup_sd(int if_index, int bypass_mode);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - on success (Disable bypass at power up state / normal Bypass mode)
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not support
* Bypass or it's a slave device)
**/
int get_bypass_pwup_sd(int if_index);
/**
* set_bypass_wd - Set watchdog state
* @if_index: network device index of the controlling device
* @ms_timeout: requested timeout (in ms units), 0 for disabling the watchdog timer
* @ms_timeout_set(output): requested timeout (in ms units),
* that the adapter supports and will be used by the watchdog
* @ms_timeout: requested timeout (in ms units), 0 for disabling the watchdog
* timer
* @ms_timeout_set(output): requested timeout (in ms units), that the adapter
* supports and will be used by the watchdog
* Output:
* 0 - on success
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not support
* Bypass or it's a slave device)
**/
int set_bypass_wd_sd(int if_index, int ms_timeout, int *ms_timeout_set);
......@@ -230,8 +249,8 @@ int set_bypass_wd_sd(int if_index, int ms_timeout, int *ms_timeout_set);
* 0 if WDT is disabled
* Output:
* 0 - on success
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not support
* Bypass or it's a slave device)
**/
int get_bypass_wd_sd(int if_index, int *ms_timeout_set);
......@@ -243,8 +262,8 @@ int get_bypass_wd_sd(int if_index, int *ms_timeout_set);
* 0 if WDT is disabled
* Output:
* 0 - on success
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device or unknown wdt status)
* -1 - on failure (device is not capable of the operation or device not support
* Bypass or it's a slave device or unknown wdt status)
**/
int get_wd_expire_time_sd(int if_index, int *ms_time_left);
......@@ -255,8 +274,8 @@ int get_wd_expire_time_sd(int if_index, int *ms_time_left);
* Output:
* 1 - on success
* 0 - watchdog is not configured
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device or unknown wdt status)
* -1 - on failure (device is not capable of the operation or device not support
* Bypass or it's a slave device or unknown wdt status)
**/
int reset_bypass_wd_timer_sd(int if_index);
......@@ -267,8 +286,8 @@ int reset_bypass_wd_timer_sd(int if_index);
*
* Output:
* 0 - on success
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not support
* Bypass or it's a slave device)
**/
int set_std_nic_sd(int if_index, int nic_mode);
......@@ -278,8 +297,8 @@ int set_std_nic_sd(int if_index, int nic_mode);
*
* Output:
* 0/1 (Default Bypass mode / Standard NIC mode) on success
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not support
* Bypass or it's a slave device)
**/
int get_std_nic_sd(int if_index);
......@@ -300,7 +319,8 @@ int set_tx_sd(int if_index, int tx_state);
*
* Output:
* 0/1 (ransmit Disable / Transmit Enable) on success
* -1 - on failure (device is not capable of the operation ordevice not support Bypass)
* -1 - on failure (device is not capable of the operation or device not support
* Bypass)
**/
int get_tx_sd(int if_index);
......@@ -338,8 +358,8 @@ int get_tap_change_sd(int if_index);
* @dis_tap: disable tap(1=dis, 0=en)
* Output:
* 0 - on success
* -1 - on failure (device is not capable of the operation ordevice not support TAP
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not support
* TAP or it's a slave device)
**/
int set_dis_tap_sd(int if_index, int dis_tap);
......@@ -348,8 +368,8 @@ int set_dis_tap_sd(int if_index, int dis_tap);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - on success (normal TAP mode/ Disable TAP)
* -1 - on failure (device is not capable of the operation ordevice not support TAP
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not support
* TAP or it's a slave device)
**/
int get_dis_tap_sd(int if_index);
......@@ -359,8 +379,8 @@ int get_dis_tap_sd(int if_index);
* @bypass_mode: tap mode setting at power up state (1=TAP en, 0=TAP Dis)
* Output:
* 0 - on success
* -1 - on failure (device is not capable of the operation ordevice not support TAP
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not
* support TAP or it's a slave device)
**/
int set_tap_pwup_sd(int if_index, int tap_mode);
......@@ -369,8 +389,8 @@ int set_tap_pwup_sd(int if_index, int tap_mode);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - on success (Disable TAP at power up state / normal TAP mode)
* -1 - on failure (device is not capable of the operation ordevice not support TAP
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not
* support TAP or it's a slave device)
**/
int get_tap_pwup_sd(int if_index);
......@@ -408,8 +428,8 @@ int get_bp_disc_change_sd(int if_index);
* @dis_tap: disable tap(1=dis, 0=en)
* Output:
* 0 - on success
* -1 - on failure (device is not capable ofthe operation ordevice not support Disconnect
* or it's a slave device)
* -1 - on failure (device is not capable ofthe operation or device not
* support Disconnect or it's a slave device)
**/
int set_bp_dis_disc_sd(int if_index, int dis_disc);
......@@ -418,8 +438,8 @@ int set_bp_dis_disc_sd(int if_index, int dis_disc);
* @if_index: network device index of the controlling device
* Output:
* 0/1 - on success (normal Disconnect mode/ Disable Disconnect)
* -1 - on failure (device is not capable of the operation ordevice not support Disconnect
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not
* support Disconnect or it's a slave device)
**/
int get_bp_dis_disc_sd(int if_index);
......@@ -429,8 +449,8 @@ int get_bp_dis_disc_sd(int if_index);
* @disc_mode: tap mode setting at power up state (1=Disc en, 0=Disc Dis)
* Output:
* 0 - on success
* -1 - on failure (device is not capable of the operation ordevice not support Disconnect
* or it's a slave device)
* -1 - on failure (device is not capable of the operation or device not
* support Disconnect or it's a slave device)
**/
int set_bp_disc_pwup_sd(int if_index, int disc_mode);
......@@ -438,9 +458,10 @@ int set_bp_disc_pwup_sd(int if_index, int disc_mode);
* get_bp_disc_pwup - Get Disconnect mode state at power-up state
* @if_index: network device index of the controlling device
* Output:
* 0/1 - on success (Disable Disconnect at power up state / normal Disconnect mode)
* -1 - on failure (device is not capable of the operation ordevice not support TAP
* or it's a slave device)
* 0/1 - on success (Disable Disconnect at power up state / normal Disconnect
* mode)
* -1 - on failure (device is not capable of the operation or device not
* support TAP or it's a slave device)
**/
int get_bp_disc_pwup_sd(int if_index);
......@@ -469,8 +490,9 @@ int get_wd_exp_mode_sd(int if_index);
* @bypass_mode: adapter mode (1=tap mode, 0=bypass mode)
* Output:
* 1 - on success
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device or unknown wdt status)
* -1 - on failure (device is not capable of the operation or device not
* support Bypass or it's a slave device or unknown wdt
* status)
**/
int set_wd_autoreset_sd(int if_index, int time);
......@@ -480,8 +502,9 @@ int set_wd_autoreset_sd(int if_index, int time);
* @bypass_mode: adapter mode (1=tap mode, 0=bypass mode)
* Output:
* 1 - on success
* -1 - on failure (device is not capable of the operation ordevice not support Bypass
* or it's a slave device or unknown wdt status)
* -1 - on failure (device is not capable of the operation or device not
* support Bypass or it's a slave device or unknown wdt
* status)
**/
int get_wd_autoreset_sd(int if_index);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment