sh: sh_mobile usb clock framework support

Add clock framework support to the usb/r8a66597 driver and
adjust the cpu specific code accordingly.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/kernel/cpu/sh4a/setup-sh7366.c

@@ -185,7 +185,6 @@ static int __init sh7366_devices_setup(void)
 	clk_always_enable("mstp023"); /* INTC3 */
 	clk_always_enable("mstp022"); /* INTC */
 	clk_always_enable("mstp020"); /* SuperHyway */
-	clk_always_enable("mstp211"); /* USB */
 	clk_always_enable("mstp207"); /* VEU-2 */
 	clk_always_enable("mstp202"); /* VEU-1 */
 	clk_always_enable("mstp201"); /* VPU */

arch/sh/kernel/cpu/sh4a/setup-sh7723.c

@@ -240,7 +240,6 @@ static int __init sh7723_devices_setup(void)
 	clk_always_enable("mstp020"); /* SuperHyway */
 	clk_always_enable("mstp000"); /* MERAM */
 	clk_always_enable("mstp108"); /* RTC */
-	clk_always_enable("mstp211"); /* USB */
 	clk_always_enable("mstp206"); /* VEU2H1 */
 	clk_always_enable("mstp202"); /* VEU2H0 */
 	clk_always_enable("mstp201"); /* VPU */

drivers/usb/host/r8a66597-hcd.c

@@ -114,6 +114,9 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
 	int i = 0;
 
 #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+#if defined(CONFIG_HAVE_CLK)
+	clk_enable(r8a66597->clk);
+#endif
 	do {
 		r8a66597_write(r8a66597, SCKE, SYSCFG0);
 		tmp = r8a66597_read(r8a66597, SYSCFG0);
@@ -154,7 +157,11 @@ static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
 {
 	r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
 	udelay(1);
-#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+#if defined(CONFIG_HAVE_CLK)
+	clk_disable(r8a66597->clk);
+#endif
+#else
 	r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
 	r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
 	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
@@ -2261,6 +2268,9 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
 	del_timer_sync(&r8a66597->rh_timer);
 	usb_remove_hcd(hcd);
 	iounmap((void *)r8a66597->reg);
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+	clk_put(r8a66597->clk);
+#endif
 	usb_put_hcd(hcd);
 	return 0;
 }
@@ -2268,6 +2278,9 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
 #define resource_len(r) (((r)->end - (r)->start) + 1)
 static int __init r8a66597_probe(struct platform_device *pdev)
 {
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+	char clk_name[8];
+#endif
 	struct resource *res = NULL, *ires;
 	int irq = -1;
 	void __iomem *reg = NULL;
@@ -2320,6 +2333,16 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	memset(r8a66597, 0, sizeof(struct r8a66597));
 	dev_set_drvdata(&pdev->dev, r8a66597);
 
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+	snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
+	r8a66597->clk = clk_get(&pdev->dev, clk_name);
+	if (IS_ERR(r8a66597->clk)) {
+		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+		ret = PTR_ERR(r8a66597->clk);
+		goto clean_up2;
+	}
+#endif
+
 	spin_lock_init(&r8a66597->lock);
 	init_timer(&r8a66597->rh_timer);
 	r8a66597->rh_timer.function = r8a66597_timer;
@@ -2365,11 +2388,19 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to add hcd\n");
-		goto clean_up;
+		goto clean_up3;
 	}
 
 	return 0;
 
+clean_up3:
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+	clk_put(r8a66597->clk);
+#endif
+
+clean_up2:
+	usb_put_hcd(hcd);
+
 clean_up:
 	if (reg)
 		iounmap(reg);

drivers/usb/host/r8a66597.h

@@ -26,6 +26,10 @@
 #ifndef __R8A66597_H__
 #define __R8A66597_H__
 
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#include <linux/clk.h>
+#endif
+
 #define SYSCFG0		0x00
 #define SYSCFG1		0x02
 #define SYSSTS0		0x04
@@ -481,7 +485,9 @@ struct r8a66597_root_hub {
 struct r8a66597 {
 	spinlock_t lock;
 	unsigned long reg;
-
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+	struct clk *clk;
+#endif
 	struct r8a66597_device		device0;
 	struct r8a66597_root_hub	root_hub[R8A66597_MAX_ROOT_HUB];
 	struct list_head		pipe_queue[R8A66597_MAX_NUM_PIPE];