staging: fsl-dpaa2/eth: Add error message newlines

A few error/warning messages lacked a newline at the end
of the text. Add it for improved consistency and cosmetics.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c

@@ -975,7 +975,7 @@ static int link_state_update(struct dpaa2_eth_priv *priv)
 		netif_carrier_off(priv->net_dev);
 	}
 
-	netdev_info(priv->net_dev, "Link Event: state %s",
+	netdev_info(priv->net_dev, "Link Event: state %s\n",
 		    state.up ? "up" : "down");
 
 	return 0;
@@ -1806,7 +1806,7 @@ static int setup_dpni(struct fsl_mc_device *ls_dev)
 	}
 
 	if ((priv->tx_data_offset % 64) != 0)
-		dev_warn(dev, "Tx data offset (%d) not a multiple of 64B",
+		dev_warn(dev, "Tx data offset (%d) not a multiple of 64B\n",
 			 priv->tx_data_offset);
 
 	/* Accommodate software annotation space (SWA) */
@@ -2002,7 +2002,7 @@ static int dpaa2_eth_set_hash(struct net_device *net_dev, u64 flags)
 
 	err = dpni_prepare_key_cfg(&cls_cfg, dma_mem);
 	if (err) {
-		dev_err(dev, "dpni_prepare_key_cfg error %d", err);
+		dev_err(dev, "dpni_prepare_key_cfg error %d\n", err);
 		goto err_prep_key;
 	}
 
@@ -2261,7 +2261,7 @@ static irqreturn_t dpni_irq0_handler_thread(int irq_num, void *arg)
 	err = dpni_get_irq_status(dpni_dev->mc_io, 0, dpni_dev->mc_handle,
 				  DPNI_IRQ_INDEX, &status);
 	if (unlikely(err)) {
-		netdev_err(net_dev, "Can't get irq status (err %d)", err);
+		netdev_err(net_dev, "Can't get irq status (err %d)\n", err);
 		clear = 0xffffffff;
 		goto out;
 	}
@@ -2295,21 +2295,21 @@ static int setup_irqs(struct fsl_mc_device *ls_dev)
 					IRQF_NO_SUSPEND | IRQF_ONESHOT,
 					dev_name(&ls_dev->dev), &ls_dev->dev);
 	if (err < 0) {
-		dev_err(&ls_dev->dev, "devm_request_threaded_irq(): %d", err);
+		dev_err(&ls_dev->dev, "devm_request_threaded_irq(): %d\n", err);
 		goto free_mc_irq;
 	}
 
 	err = dpni_set_irq_mask(ls_dev->mc_io, 0, ls_dev->mc_handle,
 				DPNI_IRQ_INDEX, DPNI_IRQ_EVENT_LINK_CHANGED);
 	if (err < 0) {
-		dev_err(&ls_dev->dev, "dpni_set_irq_mask(): %d", err);
+		dev_err(&ls_dev->dev, "dpni_set_irq_mask(): %d\n", err);
 		goto free_irq;
 	}
 
 	err = dpni_set_irq_enable(ls_dev->mc_io, 0, ls_dev->mc_handle,
 				  DPNI_IRQ_INDEX, 1);
 	if (err < 0) {
-		dev_err(&ls_dev->dev, "dpni_set_irq_enable(): %d", err);
+		dev_err(&ls_dev->dev, "dpni_set_irq_enable(): %d\n", err);
 		goto free_irq;
 	}
 

drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c

@@ -94,7 +94,7 @@ dpaa2_eth_get_link_ksettings(struct net_device *net_dev,
 
 	err = dpni_get_link_state(priv->mc_io, 0, priv->mc_token, &state);
 	if (err) {
-		netdev_err(net_dev, "ERROR %d getting link state", err);
+		netdev_err(net_dev, "ERROR %d getting link state\n", err);
 		goto out;
 	}
 
@@ -147,7 +147,7 @@ dpaa2_eth_set_link_ksettings(struct net_device *net_dev,
 		/* ethtool will be loud enough if we return an error; no point
 		 * in putting our own error message on the console by default
 		 */
-		netdev_dbg(net_dev, "ERROR %d setting link cfg", err);
+		netdev_dbg(net_dev, "ERROR %d setting link cfg\n", err);
 
 	return err;
 }
@@ -206,7 +206,7 @@ static void dpaa2_eth_get_ethtool_stats(struct net_device *net_dev,
 		err = dpni_get_statistics(priv->mc_io, 0, priv->mc_token,
 					  j, &dpni_stats);
 		if (err != 0)
-			netdev_warn(net_dev, "dpni_get_stats(%d) failed", j);
+			netdev_warn(net_dev, "dpni_get_stats(%d) failed\n", j);
 		switch (j) {
 		case 0:
 			num_cnt = sizeof(dpni_stats.page_0) / sizeof(u64);