qlcnic: enable LRO on IPv6 without dest ip check

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qlcnic/qlcnic.h

@@ -436,6 +436,7 @@ struct qlcnic_hardware_context {
 	u16 act_pci_func;
 
 	u32 capabilities;
+	u32 capabilities2;
 	u32 temp;
 	u32 int_vec_bit;
 	u32 fw_hal_version;
@@ -798,6 +799,7 @@ struct qlcnic_mac_list_s {
 #define QLCNIC_FW_CAPABILITY_MORE_CAPS		BIT_31
 
 #define QLCNIC_FW_CAPABILITY_2_LRO_MAX_TCP_SEG	BIT_2
+#define QLCNIC_FW_CAP2_HW_LRO_IPV6		BIT_3
 #define QLCNIC_FW_CAPABILITY_2_OCBB		BIT_5
 
 /* module types */

drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c

@@ -687,6 +687,11 @@ void qlcnic_82xx_config_intr_coalesce(struct qlcnic_adapter *adapter)
 			"Could not send interrupt coalescing parameters\n");
 }
 
+#define QLCNIC_ENABLE_IPV4_LRO		1
+#define QLCNIC_ENABLE_IPV6_LRO		2
+#define QLCNIC_NO_DEST_IPV4_CHECK	(1 << 8)
+#define QLCNIC_NO_DEST_IPV6_CHECK	(2 << 8)
+
 int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int enable)
 {
 	struct qlcnic_nic_req req;
@@ -703,7 +708,15 @@ int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int enable)
 	word = QLCNIC_H2C_OPCODE_CONFIG_HW_LRO | ((u64)adapter->portnum << 16);
 	req.req_hdr = cpu_to_le64(word);
 
-	req.words[0] = cpu_to_le64(enable);
+	word = 0;
+	if (enable) {
+		word = QLCNIC_ENABLE_IPV4_LRO | QLCNIC_NO_DEST_IPV4_CHECK;
+		if (adapter->ahw->capabilities2 & QLCNIC_FW_CAP2_HW_LRO_IPV6)
+			word |= QLCNIC_ENABLE_IPV6_LRO |
+				QLCNIC_NO_DEST_IPV6_CHECK;
+	}
+
+	req.words[0] = cpu_to_le64(word);
 
 	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 	if (rv != 0)

drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c

@@ -973,6 +973,7 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter,
 	struct sk_buff *skb;
 	struct qlcnic_host_rds_ring *rds_ring;
 	struct iphdr *iph;
+	struct ipv6hdr *ipv6h;
 	struct tcphdr *th;
 	bool push, timestamp;
 	int index, l2_hdr_offset, l4_hdr_offset;
@@ -1016,12 +1017,21 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter,
 	}
 
 	skb->protocol = eth_type_trans(skb, netdev);
+
+	if (htons(skb->protocol) == ETH_P_IPV6) {
+		ipv6h = (struct ipv6hdr *)skb->data;
+		th = (struct tcphdr *)(skb->data + sizeof(struct ipv6hdr));
+		length = (th->doff << 2) + lro_length;
+		ipv6h->payload_len = htons(length);
+	} else {
 		iph = (struct iphdr *)skb->data;
 		th = (struct tcphdr *)(skb->data + (iph->ihl << 2));
 		length = (iph->ihl << 2) + (th->doff << 2) + lro_length;
 		iph->tot_len = htons(length);
 		iph->check = 0;
 		iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl);
+	}
+
 	th->psh = push;
 	th->seq = htonl(seq_number);
 	length = skb->len;

drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c

@@ -781,6 +781,12 @@ qlcnic_initialize_nic(struct qlcnic_adapter *adapter)
 	adapter->ahw->max_tx_ques = nic_info.max_tx_ques;
 	adapter->ahw->max_rx_ques = nic_info.max_rx_ques;
 	adapter->ahw->capabilities = nic_info.capabilities;
+
+	if (adapter->ahw->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS) {
+		u32 temp;
+		temp = QLCRD32(adapter, CRB_FW_CAPABILITIES_2);
+		adapter->ahw->capabilities2 = temp;
+	}
 	adapter->ahw->max_mac_filters = nic_info.max_mac_filters;
 	adapter->ahw->max_mtu = nic_info.max_mtu;