Commit 7786ab6a authored by Sreekanth Reddy's avatar Sreekanth Reddy Committed by Martin K. Petersen

mpt3sas: Ported WarpDrive product SSS6200 support

Ported the following list of WarpDrive-specific patches:

1. commit 0bdccdb0 ("mpt2sas: WarpDrive
   New product SSS6200 support added")

2. commit 82a45258 ("mpt2sas: WarpDrive
   Infinite command retries due to wrong scsi command entry in MPI
   message")

3. commit ba96bd0b ("mpt2sas: Support
   for greater than 2TB capacity WarpDrive")

4. commit 4da7af94 ("mpt2sas: Do not
   retry a timed out direct IO for Warpdrive")

5. commit daeaa9df ("mpt2sas: Avoid type
   casting for direct I/O commands").

Also set the mpt2_ioctl_iocinfo adapter_type to:

1. MPT3_IOCTL_INTERFACE_SAS3 for Gen3 HBAs

2. MPT2_IOCTL_INTERFACE_SAS2_SSS6200 for Warp Drive

3. MPT2_IOCTL_INTERFACE_SAS2  for other Gen2 HBAs
Signed-off-by: default avatarSreekanth Reddy <Sreekanth.Reddy@avagotech.com>
Acked-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarHannes Reinecke <hare@suse.de>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 16e179bd
/*
* Scsi Host Layer for MPT (Message Passing Technology) based controllers
*
* Copyright (C) 2012-2014 LSI Corporation
* Copyright (C) 2013-2015 Avago Technologies
* (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* NO WARRANTY
* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
* solely responsible for determining the appropriateness of using and
* distributing the Program and assumes all risks associated with its
* exercise of rights under this Agreement, including but not limited to
* the risks and costs of program errors, damage to or loss of data,
* programs or equipment, and unavailability or interruption of operations.
* DISCLAIMER OF LIABILITY
* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
* You should have received a copy of the GNU General Public License
* along with this program.
*/
/**
* _scsih_disable_ddio - Disable direct I/O for all the volumes
* @ioc: per adapter object
*/
static void
_scsih_disable_ddio(struct MPT3SAS_ADAPTER *ioc)
{
Mpi2RaidVolPage1_t vol_pg1;
Mpi2ConfigReply_t mpi_reply;
struct _raid_device *raid_device;
u16 handle;
u16 ioc_status;
unsigned long flags;
handle = 0xFFFF;
while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
&vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
break;
handle = le16_to_cpu(vol_pg1.DevHandle);
spin_lock_irqsave(&ioc->raid_device_lock, flags);
raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
if (raid_device)
raid_device->direct_io_enabled = 0;
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
}
return;
}
/**
* _scsih_get_num_volumes - Get number of volumes in the ioc
* @ioc: per adapter object
*/
static u8
_scsih_get_num_volumes(struct MPT3SAS_ADAPTER *ioc)
{
Mpi2RaidVolPage1_t vol_pg1;
Mpi2ConfigReply_t mpi_reply;
u16 handle;
u8 vol_cnt = 0;
u16 ioc_status;
handle = 0xFFFF;
while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
&vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
break;
vol_cnt++;
handle = le16_to_cpu(vol_pg1.DevHandle);
}
return vol_cnt;
}
/**
* _scsih_init_warpdrive_properties - Set properties for warpdrive direct I/O.
* @ioc: per adapter object
* @raid_device: the raid_device object
*/
static void
_scsih_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
struct _raid_device *raid_device)
{
Mpi2RaidVolPage0_t *vol_pg0;
Mpi2RaidPhysDiskPage0_t pd_pg0;
Mpi2ConfigReply_t mpi_reply;
u16 sz;
u8 num_pds, count;
unsigned long stripe_sz, block_sz;
u8 stripe_exp, block_exp;
u64 dev_max_lba;
if (!ioc->is_warpdrive)
return;
if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) {
pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
"globally as drives are exposed\n", ioc->name);
return;
}
if (_scsih_get_num_volumes(ioc) > 1) {
_scsih_disable_ddio(ioc);
pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
"globally as number of drives > 1\n", ioc->name);
return;
}
if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle,
&num_pds)) || !num_pds) {
pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
"Failure in computing number of drives\n", ioc->name);
return;
}
sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
sizeof(Mpi2RaidVol0PhysDisk_t));
vol_pg0 = kzalloc(sz, GFP_KERNEL);
if (!vol_pg0) {
pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
"Memory allocation failure for RVPG0\n", ioc->name);
return;
}
if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
"Failure in retrieving RVPG0\n", ioc->name);
kfree(vol_pg0);
return;
}
/*
* WARPDRIVE:If number of physical disks in a volume exceeds the max pds
* assumed for WARPDRIVE, disable direct I/O
*/
if (num_pds > MPT_MAX_WARPDRIVE_PDS) {
pr_warn(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
"for the drive with handle(0x%04x): num_mem=%d, "
"max_mem_allowed=%d\n", ioc->name, raid_device->handle,
num_pds, MPT_MAX_WARPDRIVE_PDS);
kfree(vol_pg0);
return;
}
for (count = 0; count < num_pds; count++) {
if (mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
&pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
vol_pg0->PhysDisk[count].PhysDiskNum) ||
pd_pg0.DevHandle == MPT3SAS_INVALID_DEVICE_HANDLE) {
pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is "
"disabled for the drive with handle(0x%04x) member"
"handle retrieval failed for member number=%d\n",
ioc->name, raid_device->handle,
vol_pg0->PhysDisk[count].PhysDiskNum);
goto out_error;
}
/* Disable direct I/O if member drive lba exceeds 4 bytes */
dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA);
if (dev_max_lba >> 32) {
pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is "
"disabled for the drive with handle(0x%04x) member"
" handle (0x%04x) unsupported max lba 0x%016llx\n",
ioc->name, raid_device->handle,
le16_to_cpu(pd_pg0.DevHandle),
(unsigned long long)dev_max_lba);
goto out_error;
}
raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle);
}
/*
* Assumption for WD: Direct I/O is not supported if the volume is
* not RAID0
*/
if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) {
pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
"for the drive with handle(0x%04x): type=%d, "
"s_sz=%uK, blk_size=%u\n", ioc->name,
raid_device->handle, raid_device->volume_type,
(le32_to_cpu(vol_pg0->StripeSize) *
le16_to_cpu(vol_pg0->BlockSize)) / 1024,
le16_to_cpu(vol_pg0->BlockSize));
goto out_error;
}
stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
stripe_exp = find_first_bit(&stripe_sz, 32);
if (stripe_exp == 32) {
pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
"for the drive with handle(0x%04x) invalid stripe sz %uK\n",
ioc->name, raid_device->handle,
(le32_to_cpu(vol_pg0->StripeSize) *
le16_to_cpu(vol_pg0->BlockSize)) / 1024);
goto out_error;
}
raid_device->stripe_exponent = stripe_exp;
block_sz = le16_to_cpu(vol_pg0->BlockSize);
block_exp = find_first_bit(&block_sz, 16);
if (block_exp == 16) {
pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
"for the drive with handle(0x%04x) invalid block sz %u\n",
ioc->name, raid_device->handle,
le16_to_cpu(vol_pg0->BlockSize));
goto out_error;
}
raid_device->block_exponent = block_exp;
raid_device->direct_io_enabled = 1;
pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is Enabled for the drive"
" with handle(0x%04x)\n", ioc->name, raid_device->handle);
/*
* WARPDRIVE: Though the following fields are not used for direct IO,
* stored for future purpose:
*/
raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA);
raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize);
kfree(vol_pg0);
return;
out_error:
raid_device->direct_io_enabled = 0;
for (count = 0; count < num_pds; count++)
raid_device->pd_handle[count] = 0;
kfree(vol_pg0);
return;
}
/**
* _scsih_scsi_direct_io_get - returns direct io flag
* @ioc: per adapter object
* @smid: system request message index
*
* Returns the smid stored scmd pointer.
*/
static inline u8
_scsih_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid)
{
return ioc->scsi_lookup[smid - 1].direct_io;
}
/**
* _scsih_scsi_direct_io_set - sets direct io flag
* @ioc: per adapter object
* @smid: system request message index
* @direct_io: Zero or non-zero value to set in the direct_io flag
*
* Returns Nothing.
*/
static inline void
_scsih_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io)
{
ioc->scsi_lookup[smid - 1].direct_io = direct_io;
}
/**
* _scsih_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O
* @ioc: per adapter object
* @scmd: pointer to scsi command object
* @raid_device: pointer to raid device data structure
* @mpi_request: pointer to the SCSI_IO reqest message frame
* @smid: system request message index
*
* Returns nothing
*/
static void
_scsih_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
u16 smid)
{
sector_t v_lba, p_lba, stripe_off, stripe_unit, column, io_size;
u32 stripe_sz, stripe_exp;
u8 num_pds, cmd = scmd->cmnd[0];
if (cmd != READ_10 && cmd != WRITE_10 &&
cmd != READ_16 && cmd != WRITE_16)
return;
if (cmd == READ_10 || cmd == WRITE_10)
v_lba = get_unaligned_be32(&mpi_request->CDB.CDB32[2]);
else
v_lba = get_unaligned_be64(&mpi_request->CDB.CDB32[2]);
io_size = scsi_bufflen(scmd) >> raid_device->block_exponent;
if (v_lba + io_size - 1 > raid_device->max_lba)
return;
stripe_sz = raid_device->stripe_sz;
stripe_exp = raid_device->stripe_exponent;
stripe_off = v_lba & (stripe_sz - 1);
/* Return unless IO falls within a stripe */
if (stripe_off + io_size > stripe_sz)
return;
num_pds = raid_device->num_pds;
p_lba = v_lba >> stripe_exp;
stripe_unit = p_lba / num_pds;
column = p_lba % num_pds;
p_lba = (stripe_unit << stripe_exp) + stripe_off;
mpi_request->DevHandle = cpu_to_le16(raid_device->pd_handle[column]);
if (cmd == READ_10 || cmd == WRITE_10)
put_unaligned_be32(lower_32_bits(p_lba),
&mpi_request->CDB.CDB32[2]);
else
put_unaligned_be64(p_lba, &mpi_request->CDB.CDB32[2]);
_scsih_scsi_direct_io_set(ioc, smid, 1);
}
...@@ -593,7 +593,8 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc, ...@@ -593,7 +593,8 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
desc = "Device Status Change"; desc = "Device Status Change";
break; break;
case MPI2_EVENT_IR_OPERATION_STATUS: case MPI2_EVENT_IR_OPERATION_STATUS:
desc = "IR Operation Status"; if (!ioc->hide_ir_msg)
desc = "IR Operation Status";
break; break;
case MPI2_EVENT_SAS_DISCOVERY: case MPI2_EVENT_SAS_DISCOVERY:
{ {
...@@ -624,16 +625,20 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc, ...@@ -624,16 +625,20 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
desc = "SAS Enclosure Device Status Change"; desc = "SAS Enclosure Device Status Change";
break; break;
case MPI2_EVENT_IR_VOLUME: case MPI2_EVENT_IR_VOLUME:
desc = "IR Volume"; if (!ioc->hide_ir_msg)
desc = "IR Volume";
break; break;
case MPI2_EVENT_IR_PHYSICAL_DISK: case MPI2_EVENT_IR_PHYSICAL_DISK:
desc = "IR Physical Disk"; if (!ioc->hide_ir_msg)
desc = "IR Physical Disk";
break; break;
case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
desc = "IR Configuration Change List"; if (!ioc->hide_ir_msg)
desc = "IR Configuration Change List";
break; break;
case MPI2_EVENT_LOG_ENTRY_ADDED: case MPI2_EVENT_LOG_ENTRY_ADDED:
desc = "Log Entry Added"; if (!ioc->hide_ir_msg)
desc = "Log Entry Added";
break; break;
case MPI2_EVENT_TEMP_THRESHOLD: case MPI2_EVENT_TEMP_THRESHOLD:
desc = "Temperature Threshold"; desc = "Temperature Threshold";
...@@ -689,7 +694,10 @@ _base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info) ...@@ -689,7 +694,10 @@ _base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info)
originator_str = "PL"; originator_str = "PL";
break; break;
case 2: case 2:
originator_str = "IR"; if (!ioc->hide_ir_msg)
originator_str = "IR";
else
originator_str = "WarpDrive";
break; break;
} }
...@@ -1023,6 +1031,12 @@ _base_interrupt(int irq, void *bus_id) ...@@ -1023,6 +1031,12 @@ _base_interrupt(int irq, void *bus_id)
} }
wmb(); wmb();
if (ioc->is_warpdrive) {
writel(reply_q->reply_post_host_index,
ioc->reply_post_host_index[msix_index]);
atomic_dec(&reply_q->busy);
return IRQ_HANDLED;
}
/* Update Reply Post Host Index. /* Update Reply Post Host Index.
* For those HBA's which support combined reply queue feature * For those HBA's which support combined reply queue feature
...@@ -2333,6 +2347,7 @@ mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid) ...@@ -2333,6 +2347,7 @@ mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
} }
ioc->scsi_lookup[i].cb_idx = 0xFF; ioc->scsi_lookup[i].cb_idx = 0xFF;
ioc->scsi_lookup[i].scmd = NULL; ioc->scsi_lookup[i].scmd = NULL;
ioc->scsi_lookup[i].direct_io = 0;
list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list); list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list);
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
...@@ -2683,10 +2698,12 @@ _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc) ...@@ -2683,10 +2698,12 @@ _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc)
pr_info("), "); pr_info("), ");
pr_info("Capabilities=("); pr_info("Capabilities=(");
if (ioc->facts.IOCCapabilities & if (!ioc->hide_ir_msg) {
if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) { MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
pr_info("Raid"); pr_info("Raid");
i++; i++;
}
} }
if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) { if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
...@@ -4834,6 +4851,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) ...@@ -4834,6 +4851,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
u32 reply_address; u32 reply_address;
u16 smid; u16 smid;
struct _tr_list *delayed_tr, *delayed_tr_next; struct _tr_list *delayed_tr, *delayed_tr_next;
u8 hide_flag;
struct adapter_reply_queue *reply_q; struct adapter_reply_queue *reply_q;
long reply_post_free; long reply_post_free;
u32 reply_post_free_sz, index = 0; u32 reply_post_free_sz, index = 0;
...@@ -4864,6 +4882,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) ...@@ -4864,6 +4882,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
ioc->scsi_lookup[i].cb_idx = 0xFF; ioc->scsi_lookup[i].cb_idx = 0xFF;
ioc->scsi_lookup[i].smid = smid; ioc->scsi_lookup[i].smid = smid;
ioc->scsi_lookup[i].scmd = NULL; ioc->scsi_lookup[i].scmd = NULL;
ioc->scsi_lookup[i].direct_io = 0;
list_add_tail(&ioc->scsi_lookup[i].tracker_list, list_add_tail(&ioc->scsi_lookup[i].tracker_list,
&ioc->free_list); &ioc->free_list);
} }
...@@ -4966,6 +4985,16 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) ...@@ -4966,6 +4985,16 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
if (ioc->is_driver_loading) { if (ioc->is_driver_loading) {
if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier
== 0x80) {
hide_flag = (u8) (
le32_to_cpu(ioc->manu_pg10.OEMSpecificFlags0) &
MFG_PAGE10_HIDE_SSDS_MASK);
if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK)
ioc->mfg_pg10_hide_flag = hide_flag;
}
ioc->wait_for_discovery_to_complete = ioc->wait_for_discovery_to_complete =
_base_determine_wait_on_discovery(ioc); _base_determine_wait_on_discovery(ioc);
...@@ -5032,12 +5061,33 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ...@@ -5032,12 +5061,33 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
goto out_free_resources; goto out_free_resources;
} }
if (ioc->is_warpdrive) {
ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz,
sizeof(resource_size_t *), GFP_KERNEL);
if (!ioc->reply_post_host_index) {
dfailprintk(ioc, pr_info(MPT3SAS_FMT "allocation "
"for cpu_msix_table failed!!!\n", ioc->name));
r = -ENOMEM;
goto out_free_resources;
}
}
ioc->rdpq_array_enable_assigned = 0; ioc->rdpq_array_enable_assigned = 0;
ioc->dma_mask = 0; ioc->dma_mask = 0;
r = mpt3sas_base_map_resources(ioc); r = mpt3sas_base_map_resources(ioc);
if (r) if (r)
goto out_free_resources; goto out_free_resources;
if (ioc->is_warpdrive) {
ioc->reply_post_host_index[0] = (resource_size_t __iomem *)
&ioc->chip->ReplyPostHostIndex;
for (i = 1; i < ioc->cpu_msix_table_sz; i++)
ioc->reply_post_host_index[i] =
(resource_size_t __iomem *)
((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1)
* 4)));
}
pci_set_drvdata(ioc->pdev, ioc->shost); pci_set_drvdata(ioc->pdev, ioc->shost);
r = _base_get_ioc_facts(ioc, CAN_SLEEP); r = _base_get_ioc_facts(ioc, CAN_SLEEP);
...@@ -5189,6 +5239,8 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ...@@ -5189,6 +5239,8 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
_base_release_memory_pools(ioc); _base_release_memory_pools(ioc);
pci_set_drvdata(ioc->pdev, NULL); pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->cpu_msix_table); kfree(ioc->cpu_msix_table);
if (ioc->is_warpdrive)
kfree(ioc->reply_post_host_index);
kfree(ioc->pd_handles); kfree(ioc->pd_handles);
kfree(ioc->blocking_handles); kfree(ioc->blocking_handles);
kfree(ioc->tm_cmds.reply); kfree(ioc->tm_cmds.reply);
...@@ -5228,6 +5280,8 @@ mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc) ...@@ -5228,6 +5280,8 @@ mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc)
_base_release_memory_pools(ioc); _base_release_memory_pools(ioc);
pci_set_drvdata(ioc->pdev, NULL); pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->cpu_msix_table); kfree(ioc->cpu_msix_table);
if (ioc->is_warpdrive)
kfree(ioc->reply_post_host_index);
kfree(ioc->pd_handles); kfree(ioc->pd_handles);
kfree(ioc->blocking_handles); kfree(ioc->blocking_handles);
kfree(ioc->pfacts); kfree(ioc->pfacts);
......
...@@ -134,6 +134,16 @@ ...@@ -134,6 +134,16 @@
*/ */
#define MPT3SAS_FMT "%s: " #define MPT3SAS_FMT "%s: "
/*
* WarpDrive Specific Log codes
*/
#define MPT2_WARPDRIVE_LOGENTRY (0x8002)
#define MPT2_WARPDRIVE_LC_SSDT (0x41)
#define MPT2_WARPDRIVE_LC_SSDLW (0x43)
#define MPT2_WARPDRIVE_LC_SSDLF (0x44)
#define MPT2_WARPDRIVE_LC_BRMF (0x4D)
/* /*
* per target private data * per target private data
*/ */
...@@ -257,6 +267,7 @@ struct Mpi2ManufacturingPage11_t { ...@@ -257,6 +267,7 @@ struct Mpi2ManufacturingPage11_t {
* struct MPT3SAS_TARGET - starget private hostdata * struct MPT3SAS_TARGET - starget private hostdata
* @starget: starget object * @starget: starget object
* @sas_address: target sas address * @sas_address: target sas address
* @raid_device: raid_device pointer to access volume data
* @handle: device handle * @handle: device handle
* @num_luns: number luns * @num_luns: number luns
* @flags: MPT_TARGET_FLAGS_XXX flags * @flags: MPT_TARGET_FLAGS_XXX flags
...@@ -266,6 +277,7 @@ struct Mpi2ManufacturingPage11_t { ...@@ -266,6 +277,7 @@ struct Mpi2ManufacturingPage11_t {
struct MPT3SAS_TARGET { struct MPT3SAS_TARGET {
struct scsi_target *starget; struct scsi_target *starget;
u64 sas_address; u64 sas_address;
struct _raid_device *raid_device;
u16 handle; u16 handle;
int num_luns; int num_luns;
u32 flags; u32 flags;
...@@ -280,6 +292,11 @@ struct MPT3SAS_TARGET { ...@@ -280,6 +292,11 @@ struct MPT3SAS_TARGET {
#define MPT_DEVICE_FLAGS_INIT 0x01 #define MPT_DEVICE_FLAGS_INIT 0x01
#define MPT_DEVICE_TLR_ON 0x02 #define MPT_DEVICE_TLR_ON 0x02
#define MFG_PAGE10_HIDE_SSDS_MASK (0x00000003)
#define MFG_PAGE10_HIDE_ALL_DISKS (0x00)
#define MFG_PAGE10_EXPOSE_ALL_DISKS (0x01)
#define MFG_PAGE10_HIDE_IF_VOL_PRESENT (0x02)
/** /**
* struct MPT3SAS_DEVICE - sdev private hostdata * struct MPT3SAS_DEVICE - sdev private hostdata
* @sas_target: starget private hostdata * @sas_target: starget private hostdata
...@@ -381,6 +398,7 @@ struct _sas_device { ...@@ -381,6 +398,7 @@ struct _sas_device {
* @sdev: scsi device struct (volumes are single lun) * @sdev: scsi device struct (volumes are single lun)
* @wwid: unique identifier for the volume * @wwid: unique identifier for the volume
* @handle: device handle * @handle: device handle
* @block_size: Block size of the volume
* @id: target id * @id: target id
* @channel: target channel * @channel: target channel
* @volume_type: the raid level * @volume_type: the raid level
...@@ -388,6 +406,13 @@ struct _sas_device { ...@@ -388,6 +406,13 @@ struct _sas_device {
* @num_pds: number of hidden raid components * @num_pds: number of hidden raid components
* @responding: used in _scsih_raid_device_mark_responding * @responding: used in _scsih_raid_device_mark_responding
* @percent_complete: resync percent complete * @percent_complete: resync percent complete
* @direct_io_enabled: Whether direct io to PDs are allowed or not
* @stripe_exponent: X where 2powX is the stripe sz in blocks
* @block_exponent: X where 2powX is the block sz in bytes
* @max_lba: Maximum number of LBA in the volume
* @stripe_sz: Stripe Size of the volume
* @device_info: Device info of the volume member disk
* @pd_handle: Array of handles of the physical drives for direct I/O in le16
*/ */
#define MPT_MAX_WARPDRIVE_PDS 8 #define MPT_MAX_WARPDRIVE_PDS 8
struct _raid_device { struct _raid_device {
...@@ -396,13 +421,20 @@ struct _raid_device { ...@@ -396,13 +421,20 @@ struct _raid_device {
struct scsi_device *sdev; struct scsi_device *sdev;
u64 wwid; u64 wwid;
u16 handle; u16 handle;
u16 block_sz;
int id; int id;
int channel; int channel;
u8 volume_type; u8 volume_type;
u8 num_pds; u8 num_pds;
u8 responding; u8 responding;
u8 percent_complete; u8 percent_complete;
u8 direct_io_enabled;
u8 stripe_exponent;
u8 block_exponent;
u64 max_lba;
u32 stripe_sz;
u32 device_info; u32 device_info;
u16 pd_handle[MPT_MAX_WARPDRIVE_PDS];
}; };
/** /**
...@@ -511,12 +543,14 @@ struct chain_tracker { ...@@ -511,12 +543,14 @@ struct chain_tracker {
* @smid: system message id * @smid: system message id
* @scmd: scsi request pointer * @scmd: scsi request pointer
* @cb_idx: callback index * @cb_idx: callback index
* @direct_io: To indicate whether I/O is direct (WARPDRIVE)
* @tracker_list: list of free request (ioc->free_list) * @tracker_list: list of free request (ioc->free_list)
*/ */
struct scsiio_tracker { struct scsiio_tracker {
u16 smid; u16 smid;
struct scsi_cmnd *scmd; struct scsi_cmnd *scmd;
u8 cb_idx; u8 cb_idx;
u8 direct_io;
struct list_head chain_list; struct list_head chain_list;
struct list_head tracker_list; struct list_head tracker_list;
}; };
...@@ -843,6 +877,7 @@ struct MPT3SAS_ADAPTER { ...@@ -843,6 +877,7 @@ struct MPT3SAS_ADAPTER {
u16 msix_vector_count; u16 msix_vector_count;
u8 *cpu_msix_table; u8 *cpu_msix_table;
u16 cpu_msix_table_sz; u16 cpu_msix_table_sz;
resource_size_t __iomem **reply_post_host_index;
u32 ioc_reset_count; u32 ioc_reset_count;
MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds; MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
u32 non_operational_loop; u32 non_operational_loop;
...@@ -1014,6 +1049,10 @@ struct MPT3SAS_ADAPTER { ...@@ -1014,6 +1049,10 @@ struct MPT3SAS_ADAPTER {
u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT]; u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
u32 ring_buffer_offset; u32 ring_buffer_offset;
u32 ring_buffer_sz; u32 ring_buffer_sz;
u8 is_warpdrive;
u8 hide_ir_msg;
u8 mfg_pg10_hide_flag;
u8 hide_drives;
spinlock_t diag_trigger_lock; spinlock_t diag_trigger_lock;
u8 diag_trigger_active; u8 diag_trigger_active;
struct SL_WH_MASTER_TRIGGER_T diag_trigger_master; struct SL_WH_MASTER_TRIGGER_T diag_trigger_master;
......
...@@ -1030,7 +1030,10 @@ _ctl_getiocinfo(struct MPT3SAS_ADAPTER *ioc, void __user *arg) ...@@ -1030,7 +1030,10 @@ _ctl_getiocinfo(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
strcat(karg.driver_version, "-"); strcat(karg.driver_version, "-");
switch (ioc->hba_mpi_version_belonged) { switch (ioc->hba_mpi_version_belonged) {
case MPI2_VERSION: case MPI2_VERSION:
karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2; if (ioc->is_warpdrive)
karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200;
else
karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION); strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
break; break;
case MPI25_VERSION: case MPI25_VERSION:
......
...@@ -141,6 +141,7 @@ struct mpt3_ioctl_pci_info { ...@@ -141,6 +141,7 @@ struct mpt3_ioctl_pci_info {
#define MPT2_IOCTL_INTERFACE_FC_IP (0x02) #define MPT2_IOCTL_INTERFACE_FC_IP (0x02)
#define MPT2_IOCTL_INTERFACE_SAS (0x03) #define MPT2_IOCTL_INTERFACE_SAS (0x03)
#define MPT2_IOCTL_INTERFACE_SAS2 (0x04) #define MPT2_IOCTL_INTERFACE_SAS2 (0x04)
#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200 (0x05)
#define MPT3_IOCTL_INTERFACE_SAS3 (0x06) #define MPT3_IOCTL_INTERFACE_SAS3 (0x06)
#define MPT2_IOCTL_VERSION_LENGTH (32) #define MPT2_IOCTL_VERSION_LENGTH (32)
......
...@@ -54,6 +54,7 @@ ...@@ -54,6 +54,7 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/aer.h> #include <linux/aer.h>
#include <linux/raid_class.h> #include <linux/raid_class.h>
#include <asm/unaligned.h>
#include "mpt3sas_base.h" #include "mpt3sas_base.h"
...@@ -70,6 +71,21 @@ static int _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, ...@@ -70,6 +71,21 @@ static int _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle,
static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid); static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid);
#ifdef SCSI_MPT2SAS
static void _scsih_disable_ddio(struct MPT3SAS_ADAPTER *ioc);
static u8 _scsih_get_num_volumes(struct MPT3SAS_ADAPTER *ioc);
static void
_scsih_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
struct _raid_device *raid_device);
static inline u8
_scsih_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid);
static inline void
_scsih_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io);
static void
_scsih_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
u16 smid);
#endif
/* global parameters */ /* global parameters */
LIST_HEAD(mpt3sas_ioc_list); LIST_HEAD(mpt3sas_ioc_list);
...@@ -1144,7 +1160,9 @@ scsih_target_alloc(struct scsi_target *starget) ...@@ -1144,7 +1160,9 @@ scsih_target_alloc(struct scsi_target *starget)
sas_target_priv_data->handle = raid_device->handle; sas_target_priv_data->handle = raid_device->handle;
sas_target_priv_data->sas_address = raid_device->wwid; sas_target_priv_data->sas_address = raid_device->wwid;
sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
raid_device->starget = starget; sas_target_priv_data->raid_device = raid_device;
if (ioc->is_warpdrive)
raid_device->starget = starget;
} }
spin_unlock_irqrestore(&ioc->raid_device_lock, flags); spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
return 0; return 0;
...@@ -1386,7 +1404,10 @@ int ...@@ -1386,7 +1404,10 @@ int
scsih_is_raid(struct device *dev) scsih_is_raid(struct device *dev)
{ {
struct scsi_device *sdev = to_scsi_device(dev); struct scsi_device *sdev = to_scsi_device(dev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
if (ioc->is_warpdrive)
return 0;
return (sdev->channel == RAID_CHANNEL) ? 1 : 0; return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
} }
...@@ -1409,6 +1430,9 @@ scsih_get_resync(struct device *dev) ...@@ -1409,6 +1430,9 @@ scsih_get_resync(struct device *dev)
percent_complete = 0; percent_complete = 0;
handle = 0; handle = 0;
if (ioc->is_warpdrive)
goto out;
spin_lock_irqsave(&ioc->raid_device_lock, flags); spin_lock_irqsave(&ioc->raid_device_lock, flags);
raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id, raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
sdev->channel); sdev->channel);
...@@ -1592,8 +1616,6 @@ _scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER *ioc, ...@@ -1592,8 +1616,6 @@ _scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER *ioc,
return 0; return 0;
} }
/** /**
* _scsih_enable_tlr - setting TLR flags * _scsih_enable_tlr - setting TLR flags
* @ioc: per adapter object * @ioc: per adapter object
...@@ -1672,6 +1694,12 @@ scsih_slave_configure(struct scsi_device *sdev) ...@@ -1672,6 +1694,12 @@ scsih_slave_configure(struct scsi_device *sdev)
return 1; return 1;
} }
#ifdef SCSI_MPT2SAS
/*
* WARPDRIVE: Initialize the required data for Direct IO
*/
_scsih_init_warpdrive_properties(ioc, raid_device);
#endif
/* RAID Queue Depth Support /* RAID Queue Depth Support
* IS volume = underlying qdepth of drive type, either * IS volume = underlying qdepth of drive type, either
...@@ -1720,17 +1748,19 @@ scsih_slave_configure(struct scsi_device *sdev) ...@@ -1720,17 +1748,19 @@ scsih_slave_configure(struct scsi_device *sdev)
break; break;
} }
sdev_printk(KERN_INFO, sdev, if (!ioc->hide_ir_msg)
"%s: handle(0x%04x), wwid(0x%016llx), pd_count(%d), type(%s)\n", sdev_printk(KERN_INFO, sdev,
r_level, raid_device->handle, "%s: handle(0x%04x), wwid(0x%016llx),"
(unsigned long long)raid_device->wwid, " pd_count(%d), type(%s)\n",
raid_device->num_pds, ds); r_level, raid_device->handle,
(unsigned long long)raid_device->wwid,
raid_device->num_pds, ds);
scsih_change_queue_depth(sdev, qdepth); scsih_change_queue_depth(sdev, qdepth);
/* raid transport support */ /* raid transport support */
_scsih_set_level(sdev, raid_device->volume_type); if (!ioc->is_warpdrive)
_scsih_set_level(sdev, raid_device->volume_type);
return 0; return 0;
} }
...@@ -2179,7 +2209,10 @@ _scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd) ...@@ -2179,7 +2209,10 @@ _scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
if (!priv_target) if (!priv_target)
return; return;
device_str = "volume"; if (ioc->hide_ir_msg)
device_str = "WarpDrive";
else
device_str = "volume";
scsi_print_command(scmd); scsi_print_command(scmd);
if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) { if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
...@@ -3368,6 +3401,9 @@ _scsih_check_ir_config_unhide_events(struct MPT3SAS_ADAPTER *ioc, ...@@ -3368,6 +3401,9 @@ _scsih_check_ir_config_unhide_events(struct MPT3SAS_ADAPTER *ioc,
a = 0; a = 0;
b = 0; b = 0;
if (ioc->is_warpdrive)
return;
/* Volume Resets for Deleted or Removed */ /* Volume Resets for Deleted or Removed */
element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
for (i = 0; i < event_data->NumElements; i++, element++) { for (i = 0; i < event_data->NumElements; i++, element++) {
...@@ -3604,6 +3640,7 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status) ...@@ -3604,6 +3640,7 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
} }
/** /**
* scsih_qcmd - main scsi request entry point * scsih_qcmd - main scsi request entry point
* @scmd: pointer to scsi command object * @scmd: pointer to scsi command object
...@@ -3621,6 +3658,9 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) ...@@ -3621,6 +3658,9 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
struct MPT3SAS_DEVICE *sas_device_priv_data; struct MPT3SAS_DEVICE *sas_device_priv_data;
struct MPT3SAS_TARGET *sas_target_priv_data; struct MPT3SAS_TARGET *sas_target_priv_data;
#ifdef SCSI_MPT2SAS
struct _raid_device *raid_device;
#endif
Mpi2SCSIIORequest_t *mpi_request; Mpi2SCSIIORequest_t *mpi_request;
u32 mpi_control; u32 mpi_control;
u16 smid; u16 smid;
...@@ -3677,7 +3717,11 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) ...@@ -3677,7 +3717,11 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
/* set tags */ /* set tags */
mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) && /* Make sure Device is not raid volume.
* We do not expose raid functionality to upper layer for warpdrive.
*/
if (!ioc->is_warpdrive && !scsih_is_raid(&scmd->device->sdev_gendev)
&& (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
scmd->cmd_len != 32) scmd->cmd_len != 32)
mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON; mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
...@@ -3720,6 +3764,13 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) ...@@ -3720,6 +3764,13 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
} else } else
ioc->build_zero_len_sge(ioc, &mpi_request->SGL); ioc->build_zero_len_sge(ioc, &mpi_request->SGL);
#ifdef SCSI_MPT2SAS
raid_device = sas_target_priv_data->raid_device;
if (raid_device && raid_device->direct_io_enabled)
_scsih_setup_direct_io(ioc, scmd, raid_device, mpi_request,
smid);
#endif
if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) { if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) {
#ifndef SCSI_MPT2SAS #ifndef SCSI_MPT2SAS
if (sas_target_priv_data->flags & MPT_TARGET_FASTPATH_IO) { if (sas_target_priv_data->flags & MPT_TARGET_FASTPATH_IO) {
...@@ -3728,7 +3779,8 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) ...@@ -3728,7 +3779,8 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
mpt3sas_base_put_smid_fast_path(ioc, smid, handle); mpt3sas_base_put_smid_fast_path(ioc, smid, handle);
} else } else
#endif #endif
mpt3sas_base_put_smid_scsi_io(ioc, smid, handle); mpt3sas_base_put_smid_scsi_io(ioc, smid,
le16_to_cpu(mpi_request->DevHandle));
} else } else
mpt3sas_base_put_smid_default(ioc, smid); mpt3sas_base_put_smid_default(ioc, smid);
return 0; return 0;
...@@ -3794,7 +3846,10 @@ _scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, ...@@ -3794,7 +3846,10 @@ _scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
if (!priv_target) if (!priv_target)
return; return;
device_str = "volume"; if (ioc->hide_ir_msg)
device_str = "WarpDrive";
else
device_str = "volume";
if (log_info == 0x31170000) if (log_info == 0x31170000)
return; return;
...@@ -4175,6 +4230,9 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) ...@@ -4175,6 +4230,9 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
u32 log_info; u32 log_info;
struct MPT3SAS_DEVICE *sas_device_priv_data; struct MPT3SAS_DEVICE *sas_device_priv_data;
u32 response_code = 0; u32 response_code = 0;
#ifdef SCSI_MPT2SAS
unsigned long flags;
#endif
mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
scmd = _scsih_scsi_lookup_get_clear(ioc, smid); scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
...@@ -4196,6 +4254,26 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) ...@@ -4196,6 +4254,26 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
} }
ioc_status = le16_to_cpu(mpi_reply->IOCStatus); ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
#ifdef SCSI_MPT2SAS
/*
* WARPDRIVE: If direct_io is set then it is directIO,
* the failed direct I/O should be redirected to volume
*/
if (_scsih_scsi_direct_io_get(ioc, smid) &&
((ioc_status & MPI2_IOCSTATUS_MASK)
!= MPI2_IOCSTATUS_SCSI_TASK_TERMINATED)) {
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
ioc->scsi_lookup[smid - 1].scmd = scmd;
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
_scsih_scsi_direct_io_set(ioc, smid, 0);
memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
mpi_request->DevHandle =
cpu_to_le16(sas_device_priv_data->sas_target->handle);
mpt3sas_base_put_smid_scsi_io(ioc, smid,
sas_device_priv_data->sas_target->handle);
return 0;
}
#endif
/* turning off TLR */ /* turning off TLR */
scsi_state = mpi_reply->SCSIState; scsi_state = mpi_reply->SCSIState;
if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
...@@ -4203,7 +4281,9 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) ...@@ -4203,7 +4281,9 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF; le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
if (!sas_device_priv_data->tlr_snoop_check) { if (!sas_device_priv_data->tlr_snoop_check) {
sas_device_priv_data->tlr_snoop_check++; sas_device_priv_data->tlr_snoop_check++;
if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) && if (!ioc->is_warpdrive &&
!scsih_is_raid(&scmd->device->sdev_gendev) &&
(sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME)
sas_device_priv_data->flags &= sas_device_priv_data->flags &=
~MPT_DEVICE_TLR_ON; ~MPT_DEVICE_TLR_ON;
...@@ -5110,7 +5190,9 @@ _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc, ...@@ -5110,7 +5190,9 @@ _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
sas_target_priv_data->handle = sas_target_priv_data->handle =
MPT3SAS_INVALID_DEVICE_HANDLE; MPT3SAS_INVALID_DEVICE_HANDLE;
} }
mpt3sas_transport_port_remove(ioc,
if (!ioc->hide_drives)
mpt3sas_transport_port_remove(ioc,
sas_device->sas_address, sas_device->sas_address,
sas_device->sas_address_parent); sas_device->sas_address_parent);
...@@ -6208,7 +6290,8 @@ _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc, ...@@ -6208,7 +6290,8 @@ _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc,
(Mpi2EventDataIrConfigChangeList_t *) (Mpi2EventDataIrConfigChangeList_t *)
fw_event->event_data; fw_event->event_data;
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) &&
(!ioc->hide_ir_msg))
_scsih_sas_ir_config_change_event_debug(ioc, event_data); _scsih_sas_ir_config_change_event_debug(ioc, event_data);
foreign_config = (le32_to_cpu(event_data->Flags) & foreign_config = (le32_to_cpu(event_data->Flags) &
...@@ -6226,6 +6309,7 @@ _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc, ...@@ -6226,6 +6309,7 @@ _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc,
#endif #endif
return; return;
} }
for (i = 0; i < event_data->NumElements; i++, element++) { for (i = 0; i < event_data->NumElements; i++, element++) {
switch (element->ReasonCode) { switch (element->ReasonCode) {
...@@ -6241,16 +6325,20 @@ _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc, ...@@ -6241,16 +6325,20 @@ _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc,
le16_to_cpu(element->VolDevHandle)); le16_to_cpu(element->VolDevHandle));
break; break;
case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
_scsih_sas_pd_hide(ioc, element); if (!ioc->is_warpdrive)
_scsih_sas_pd_hide(ioc, element);
break; break;
case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
_scsih_sas_pd_expose(ioc, element); if (!ioc->is_warpdrive)
_scsih_sas_pd_expose(ioc, element);
break; break;
case MPI2_EVENT_IR_CHANGE_RC_HIDE: case MPI2_EVENT_IR_CHANGE_RC_HIDE:
_scsih_sas_pd_add(ioc, element); if (!ioc->is_warpdrive)
_scsih_sas_pd_add(ioc, element);
break; break;
case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
_scsih_sas_pd_delete(ioc, element); if (!ioc->is_warpdrive)
_scsih_sas_pd_delete(ioc, element);
break; break;
} }
} }
...@@ -6285,10 +6373,11 @@ _scsih_sas_ir_volume_event(struct MPT3SAS_ADAPTER *ioc, ...@@ -6285,10 +6373,11 @@ _scsih_sas_ir_volume_event(struct MPT3SAS_ADAPTER *ioc,
handle = le16_to_cpu(event_data->VolDevHandle); handle = le16_to_cpu(event_data->VolDevHandle);
state = le32_to_cpu(event_data->NewValue); state = le32_to_cpu(event_data->NewValue);
dewtprintk(ioc, pr_info(MPT3SAS_FMT if (!ioc->hide_ir_msg)
"%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n", dewtprintk(ioc, pr_info(MPT3SAS_FMT
ioc->name, __func__, handle, "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
le32_to_cpu(event_data->PreviousValue), state)); ioc->name, __func__, handle,
le32_to_cpu(event_data->PreviousValue), state));
switch (state) { switch (state) {
case MPI2_RAID_VOL_STATE_MISSING: case MPI2_RAID_VOL_STATE_MISSING:
case MPI2_RAID_VOL_STATE_FAILED: case MPI2_RAID_VOL_STATE_FAILED:
...@@ -6371,10 +6460,12 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc, ...@@ -6371,10 +6460,12 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc,
handle = le16_to_cpu(event_data->PhysDiskDevHandle); handle = le16_to_cpu(event_data->PhysDiskDevHandle);
state = le32_to_cpu(event_data->NewValue); state = le32_to_cpu(event_data->NewValue);
dewtprintk(ioc, pr_info(MPT3SAS_FMT if (!ioc->hide_ir_msg)
"%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n", dewtprintk(ioc, pr_info(MPT3SAS_FMT
ioc->name, __func__, handle, "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
ioc->name, __func__, handle,
le32_to_cpu(event_data->PreviousValue), state)); le32_to_cpu(event_data->PreviousValue), state));
switch (state) { switch (state) {
case MPI2_RAID_PD_STATE_ONLINE: case MPI2_RAID_PD_STATE_ONLINE:
case MPI2_RAID_PD_STATE_DEGRADED: case MPI2_RAID_PD_STATE_DEGRADED:
...@@ -6382,7 +6473,8 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc, ...@@ -6382,7 +6473,8 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc,
case MPI2_RAID_PD_STATE_OPTIMAL: case MPI2_RAID_PD_STATE_OPTIMAL:
case MPI2_RAID_PD_STATE_HOT_SPARE: case MPI2_RAID_PD_STATE_HOT_SPARE:
set_bit(handle, ioc->pd_handles); if (!ioc->is_warpdrive)
set_bit(handle, ioc->pd_handles);
spin_lock_irqsave(&ioc->sas_device_lock, flags); spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle); sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags); spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
...@@ -6484,7 +6576,8 @@ _scsih_sas_ir_operation_status_event(struct MPT3SAS_ADAPTER *ioc, ...@@ -6484,7 +6576,8 @@ _scsih_sas_ir_operation_status_event(struct MPT3SAS_ADAPTER *ioc,
unsigned long flags; unsigned long flags;
u16 handle; u16 handle;
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) &&
(!ioc->hide_ir_msg))
_scsih_sas_ir_operation_status_event_debug(ioc, _scsih_sas_ir_operation_status_event_debug(ioc,
event_data); event_data);
...@@ -6655,7 +6748,7 @@ static void ...@@ -6655,7 +6748,7 @@ static void
_scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid, _scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
u16 handle) u16 handle)
{ {
struct MPT3SAS_TARGET *sas_target_priv_data; struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
struct scsi_target *starget; struct scsi_target *starget;
struct _raid_device *raid_device; struct _raid_device *raid_device;
unsigned long flags; unsigned long flags;
...@@ -6674,6 +6767,15 @@ _scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid, ...@@ -6674,6 +6767,15 @@ _scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
starget_printk(KERN_INFO, raid_device->starget, starget_printk(KERN_INFO, raid_device->starget,
"handle(0x%04x), wwid(0x%016llx)\n", handle, "handle(0x%04x), wwid(0x%016llx)\n", handle,
(unsigned long long)raid_device->wwid); (unsigned long long)raid_device->wwid);
#ifdef SCSI_MPT2SAS
/*
* WARPDRIVE: The handles of the PDs might have changed
* across the host reset so re-initialize the
* required data for Direct IO
*/
_scsih_init_warpdrive_properties(ioc, raid_device);
#endif
spin_lock_irqsave(&ioc->raid_device_lock, flags); spin_lock_irqsave(&ioc->raid_device_lock, flags);
if (raid_device->handle == handle) { if (raid_device->handle == handle) {
spin_unlock_irqrestore(&ioc->raid_device_lock, spin_unlock_irqrestore(&ioc->raid_device_lock,
...@@ -6743,6 +6845,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc) ...@@ -6743,6 +6845,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc)
} }
/* refresh the pd_handles */ /* refresh the pd_handles */
if (!ioc->is_warpdrive) {
phys_disk_num = 0xFF; phys_disk_num = 0xFF;
memset(ioc->pd_handles, 0, ioc->pd_handles_sz); memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply, while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
...@@ -6756,6 +6859,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc) ...@@ -6756,6 +6859,7 @@ _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc)
handle = le16_to_cpu(pd_pg0.DevHandle); handle = le16_to_cpu(pd_pg0.DevHandle);
set_bit(handle, ioc->pd_handles); set_bit(handle, ioc->pd_handles);
} }
}
out: out:
pr_info(MPT3SAS_FMT "search for responding raid volumes: complete\n", pr_info(MPT3SAS_FMT "search for responding raid volumes: complete\n",
ioc->name); ioc->name);
...@@ -7405,7 +7509,53 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, ...@@ -7405,7 +7509,53 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
(Mpi2EventDataIrVolume_t *) (Mpi2EventDataIrVolume_t *)
mpi_reply->EventData); mpi_reply->EventData);
break; break;
case MPI2_EVENT_LOG_ENTRY_ADDED:
{
Mpi2EventDataLogEntryAdded_t *log_entry;
u32 *log_code;
if (!ioc->is_warpdrive)
break;
log_entry = (Mpi2EventDataLogEntryAdded_t *)
mpi_reply->EventData;
log_code = (u32 *)log_entry->LogData;
if (le16_to_cpu(log_entry->LogEntryQualifier)
!= MPT2_WARPDRIVE_LOGENTRY)
break;
switch (le32_to_cpu(*log_code)) {
case MPT2_WARPDRIVE_LC_SSDT:
pr_warn(MPT3SAS_FMT "WarpDrive Warning: "
"IO Throttling has occurred in the WarpDrive "
"subsystem. Check WarpDrive documentation for "
"additional details.\n", ioc->name);
break;
case MPT2_WARPDRIVE_LC_SSDLW:
pr_warn(MPT3SAS_FMT "WarpDrive Warning: "
"Program/Erase Cycles for the WarpDrive subsystem "
"in degraded range. Check WarpDrive documentation "
"for additional details.\n", ioc->name);
break;
case MPT2_WARPDRIVE_LC_SSDLF:
pr_err(MPT3SAS_FMT "WarpDrive Fatal Error: "
"There are no Program/Erase Cycles for the "
"WarpDrive subsystem. The storage device will be "
"in read-only mode. Check WarpDrive documentation "
"for additional details.\n", ioc->name);
break;
case MPT2_WARPDRIVE_LC_BRMF:
pr_err(MPT3SAS_FMT "WarpDrive Fatal Error: "
"The Backup Rail Monitor has failed on the "
"WarpDrive subsystem. Check WarpDrive "
"documentation for additional details.\n",
ioc->name);
break;
}
break;
}
case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
case MPI2_EVENT_IR_OPERATION_STATUS: case MPI2_EVENT_IR_OPERATION_STATUS:
case MPI2_EVENT_SAS_DISCOVERY: case MPI2_EVENT_SAS_DISCOVERY:
...@@ -7535,7 +7685,8 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc) ...@@ -7535,7 +7685,8 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc)
mpi_request->Function = MPI2_FUNCTION_RAID_ACTION; mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED; mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
pr_info(MPT3SAS_FMT "IR shutdown (sending)\n", ioc->name); if (!ioc->hide_ir_msg)
pr_info(MPT3SAS_FMT "IR shutdown (sending)\n", ioc->name);
init_completion(&ioc->scsih_cmds.done); init_completion(&ioc->scsih_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid); mpt3sas_base_put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ); wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
...@@ -7548,10 +7699,11 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc) ...@@ -7548,10 +7699,11 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc)
if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) { if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
mpi_reply = ioc->scsih_cmds.reply; mpi_reply = ioc->scsih_cmds.reply;
pr_info(MPT3SAS_FMT if (!ioc->hide_ir_msg)
"IR shutdown (complete): ioc_status(0x%04x), loginfo(0x%08x)\n", pr_info(MPT3SAS_FMT "IR shutdown "
ioc->name, le16_to_cpu(mpi_reply->IOCStatus), "(complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
le32_to_cpu(mpi_reply->IOCLogInfo)); ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
le32_to_cpu(mpi_reply->IOCLogInfo));
} }
out: out:
...@@ -7716,6 +7868,8 @@ _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc) ...@@ -7716,6 +7868,8 @@ _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc)
list_move_tail(&sas_device->list, &ioc->sas_device_list); list_move_tail(&sas_device->list, &ioc->sas_device_list);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags); spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (ioc->hide_drives)
return;
if (!mpt3sas_transport_port_add(ioc, handle, if (!mpt3sas_transport_port_add(ioc, handle,
sas_address_parent)) { sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device); _scsih_sas_device_remove(ioc, sas_device);
...@@ -7769,6 +7923,9 @@ _scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc) ...@@ -7769,6 +7923,9 @@ _scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc)
list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list, list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
list) { list) {
if (ioc->hide_drives)
return;
if (!mpt3sas_transport_port_add(ioc, sas_device->handle, if (!mpt3sas_transport_port_add(ioc, sas_device->handle,
sas_device->sas_address_parent)) { sas_device->sas_address_parent)) {
list_del(&sas_device->list); list_del(&sas_device->list);
...@@ -7913,6 +8070,9 @@ void ...@@ -7913,6 +8070,9 @@ void
_scsih_determine_hba_mpi_version(struct MPT3SAS_ADAPTER *ioc) { _scsih_determine_hba_mpi_version(struct MPT3SAS_ADAPTER *ioc) {
switch (ioc->pdev->device) { switch (ioc->pdev->device) {
case MPI2_MFGPAGE_DEVID_SSS6200:
ioc->is_warpdrive = 1;
ioc->hide_ir_msg = 1;
case MPI2_MFGPAGE_DEVID_SAS2004: case MPI2_MFGPAGE_DEVID_SAS2004:
case MPI2_MFGPAGE_DEVID_SAS2008: case MPI2_MFGPAGE_DEVID_SAS2008:
case MPI2_MFGPAGE_DEVID_SAS2108_1: case MPI2_MFGPAGE_DEVID_SAS2108_1:
...@@ -7947,6 +8107,10 @@ _scsih_determine_hba_mpi_version(struct MPT3SAS_ADAPTER *ioc) { ...@@ -7947,6 +8107,10 @@ _scsih_determine_hba_mpi_version(struct MPT3SAS_ADAPTER *ioc) {
ioc->msix96_vector = 1; ioc->msix96_vector = 1;
break; break;
} }
if ((ioc->pdev->device != MPI2_MFGPAGE_DEVID_SSS6200) &&
(ioc->hba_mpi_version_belonged == MPI2_VERSION))
ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS;
} }
/** /**
...@@ -7969,7 +8133,6 @@ scsih_probe(struct pci_dev *pdev, struct Scsi_Host *shost) ...@@ -7969,7 +8133,6 @@ scsih_probe(struct pci_dev *pdev, struct Scsi_Host *shost)
list_add_tail(&ioc->list, &mpt3sas_ioc_list); list_add_tail(&ioc->list, &mpt3sas_ioc_list);
ioc->shost = shost; ioc->shost = shost;
ioc->id = mpt_ids++; ioc->id = mpt_ids++;
ioc->pdev = pdev; ioc->pdev = pdev;
ioc->scsi_io_cb_idx = scsi_io_cb_idx; ioc->scsi_io_cb_idx = scsi_io_cb_idx;
ioc->tm_cb_idx = tm_cb_idx; ioc->tm_cb_idx = tm_cb_idx;
...@@ -8062,6 +8225,23 @@ scsih_probe(struct pci_dev *pdev, struct Scsi_Host *shost) ...@@ -8062,6 +8225,23 @@ scsih_probe(struct pci_dev *pdev, struct Scsi_Host *shost)
rv = -ENODEV; rv = -ENODEV;
goto out_attach_fail; goto out_attach_fail;
} }
#ifdef SCSI_MPT2SAS
if (ioc->is_warpdrive) {
if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS)
ioc->hide_drives = 0;
else if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_HIDE_ALL_DISKS)
ioc->hide_drives = 1;
else {
if (_scsih_get_num_volumes(ioc))
ioc->hide_drives = 1;
else
ioc->hide_drives = 0;
}
} else
ioc->hide_drives = 0;
#endif
rv = scsi_add_host(shost, &pdev->dev); rv = scsi_add_host(shost, &pdev->dev);
if (rv) { if (rv) {
pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
...@@ -8334,3 +8514,7 @@ scsih_exit(void) ...@@ -8334,3 +8514,7 @@ scsih_exit(void)
raid_class_release(mpt3sas_raid_template); raid_class_release(mpt3sas_raid_template);
sas_release_transport(mpt3sas_transport_template); sas_release_transport(mpt3sas_transport_template);
} }
#ifdef SCSI_MPT2SAS
#include "../mpt2sas/mpt2sas_warpdrive.c"
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment