tulip: remove __dev* attributes

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/ethernet/dec/tulip/de2104x.c

@@ -1700,7 +1700,7 @@ static const struct ethtool_ops de_ethtool_ops = {
 	.get_regs		= de_get_regs,
 };
 
-static void __devinit de21040_get_mac_address (struct de_private *de)
+static void de21040_get_mac_address(struct de_private *de)
 {
 	unsigned i;
 
@@ -1721,7 +1721,7 @@ static void __devinit de21040_get_mac_address (struct de_private *de)
 	}
 }
 
-static void __devinit de21040_get_media_info(struct de_private *de)
+static void de21040_get_media_info(struct de_private *de)
 {
 	unsigned int i;
 
@@ -1748,7 +1748,8 @@ static void __devinit de21040_get_media_info(struct de_private *de)
 }
 
 /* Note: this routine returns extra data bits for size detection. */
-static unsigned __devinit tulip_read_eeprom(void __iomem *regs, int location, int addr_len)
+static unsigned tulip_read_eeprom(void __iomem *regs, int location,
+				  int addr_len)
 {
 	int i;
 	unsigned retval = 0;
@@ -1783,7 +1784,7 @@ static unsigned __devinit tulip_read_eeprom(void __iomem *regs, int location, in
 	return retval;
 }
 
-static void __devinit de21041_get_srom_info (struct de_private *de)
+static void de21041_get_srom_info(struct de_private *de)
 {
 	unsigned i, sa_offset = 0, ofs;
 	u8 ee_data[DE_EEPROM_SIZE + 6] = {};
@@ -1961,7 +1962,7 @@ static const struct net_device_ops de_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-static int __devinit de_init_one (struct pci_dev *pdev,
+static int de_init_one(struct pci_dev *pdev,
 		       const struct pci_device_id *ent)
 {
 	struct net_device *dev;
@@ -2099,7 +2100,7 @@ static int __devinit de_init_one (struct pci_dev *pdev,
 	return rc;
 }
 
-static void __devexit de_remove_one (struct pci_dev *pdev)
+static void de_remove_one(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct de_private *de = netdev_priv(dev);
@@ -2184,7 +2185,7 @@ static struct pci_driver de_driver = {
 	.name		= DRV_NAME,
 	.id_table	= de_pci_tbl,
 	.probe		= de_init_one,
-	.remove		= __devexit_p(de_remove_one),
+	.remove		= de_remove_one,
 #ifdef CONFIG_PM
 	.suspend	= de_suspend,
 	.resume		= de_resume,

drivers/net/ethernet/dec/tulip/de4x5.c

@@ -479,7 +479,7 @@
 
 #include "de4x5.h"
 
-static const char version[] __devinitconst =
+static const char version[] =
 	KERN_INFO "de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com\n";
 
 #define c_char const char
@@ -1092,7 +1092,7 @@ static const struct net_device_ops de4x5_netdev_ops = {
 };
 
 
-static int __devinit
+static int
 de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
 {
     char name[DE4X5_NAME_LENGTH + 1];
@@ -2077,7 +2077,7 @@ static int __init de4x5_eisa_probe (struct device *gendev)
 	return status;
 }
 
-static int __devexit de4x5_eisa_remove (struct device *device)
+static int de4x5_eisa_remove(struct device *device)
 {
 	struct net_device *dev;
 	u_long iobase;
@@ -2104,7 +2104,7 @@ static struct eisa_driver de4x5_eisa_driver = {
         .driver   = {
                 .name    = "de4x5",
                 .probe   = de4x5_eisa_probe,
-                .remove  = __devexit_p (de4x5_eisa_remove),
+		.remove	 = de4x5_eisa_remove,
         }
 };
 MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
@@ -2118,7 +2118,7 @@ MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
 ** DECchips, we can find the base SROM irrespective of the BIOS scan direction.
 ** For single port cards this is a time waster...
 */
-static void __devinit
+static void
 srom_search(struct net_device *dev, struct pci_dev *pdev)
 {
     u_char pb;
@@ -2192,7 +2192,7 @@ srom_search(struct net_device *dev, struct pci_dev *pdev)
 ** kernels use the V0.535[n] drivers.
 */
 
-static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
+static int de4x5_pci_probe(struct pci_dev *pdev,
 			   const struct pci_device_id *ent)
 {
 	u_char pb, pbus = 0, dev_num, dnum = 0, timer;
@@ -2314,7 +2314,7 @@ static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
 	return error;
 }
 
-static void __devexit de4x5_pci_remove (struct pci_dev *pdev)
+static void de4x5_pci_remove(struct pci_dev *pdev)
 {
 	struct net_device *dev;
 	u_long iobase;
@@ -2344,7 +2344,7 @@ static struct pci_driver de4x5_pci_driver = {
         .name           = "de4x5",
         .id_table       = de4x5_pci_tbl,
         .probe          = de4x5_pci_probe,
-	.remove         = __devexit_p (de4x5_pci_remove),
+	.remove         = de4x5_pci_remove,
 };
 
 #endif

drivers/net/ethernet/dec/tulip/dmfe.c

@@ -291,8 +291,8 @@ enum dmfe_CR6_bits {
 };
 
 /* Global variable declaration ----------------------------- */
-static int __devinitdata printed_version;
-static const char version[] __devinitconst =
+static int printed_version;
+static const char version[] =
 	"Davicom DM9xxx net driver, version " DRV_VERSION " (" DRV_RELDATE ")";
 
 static int dmfe_debug;
@@ -367,7 +367,7 @@ static const struct net_device_ops netdev_ops = {
  *	Search DM910X board ,allocate space and register it
  */
 
-static int __devinit dmfe_init_one (struct pci_dev *pdev,
+static int dmfe_init_one(struct pci_dev *pdev,
 			 const struct pci_device_id *ent)
 {
 	struct dmfe_board_info *db;	/* board information structure */
@@ -531,7 +531,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 }
 
 
-static void __devexit dmfe_remove_one (struct pci_dev *pdev)
+static void dmfe_remove_one(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct dmfe_board_info *db = netdev_priv(dev);
@@ -2187,7 +2187,7 @@ static struct pci_driver dmfe_driver = {
 	.name		= "dmfe",
 	.id_table	= dmfe_pci_tbl,
 	.probe		= dmfe_init_one,
-	.remove		= __devexit_p(dmfe_remove_one),
+	.remove		= dmfe_remove_one,
 	.suspend        = dmfe_suspend,
 	.resume         = dmfe_resume
 };

drivers/net/ethernet/dec/tulip/eeprom.c

@@ -26,7 +26,7 @@
    */
 
 /* Known cards that have old-style EEPROMs. */
-static struct eeprom_fixup eeprom_fixups[] __devinitdata = {
+static struct eeprom_fixup eeprom_fixups[] = {
   {"Asante", 0, 0, 0x94, {0x1e00, 0x0000, 0x0800, 0x0100, 0x018c,
 			  0x0000, 0x0000, 0xe078, 0x0001, 0x0050, 0x0018 }},
   {"SMC9332DST", 0, 0, 0xC0, { 0x1e00, 0x0000, 0x0800, 0x041f,
@@ -79,7 +79,7 @@ static struct eeprom_fixup eeprom_fixups[] __devinitdata = {
   {NULL}};
 
 
-static const char *const block_name[] __devinitconst = {
+static const char *const block_name[] = {
 	"21140 non-MII",
 	"21140 MII PHY",
 	"21142 Serial PHY",
@@ -102,7 +102,7 @@ static const char *const block_name[] __devinitconst = {
  * #ifdef __hppa__ should completely optimize this function away for
  * non-parisc hardware.
  */
-static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
+static void tulip_build_fake_mediatable(struct tulip_private *tp)
 {
 #ifdef CONFIG_GSC
 	if (tp->flags & NEEDS_FAKE_MEDIA_TABLE) {
@@ -140,7 +140,7 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
 #endif
 }
 
-void __devinit tulip_parse_eeprom(struct net_device *dev)
+void tulip_parse_eeprom(struct net_device *dev)
 {
 	/*
 	  dev is not registered at this point, so logging messages can't
@@ -339,7 +339,7 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
 #define EE_READ_CMD		(6)
 
 /* Note: this routine returns extra data bits for size detection. */
-int __devinit tulip_read_eeprom(struct net_device *dev, int location, int addr_len)
+int tulip_read_eeprom(struct net_device *dev, int location, int addr_len)
 {
 	int i;
 	unsigned retval = 0;

drivers/net/ethernet/dec/tulip/media.c

@@ -447,7 +447,7 @@ int tulip_check_duplex(struct net_device *dev)
 	return 0;
 }
 
-void __devinit tulip_find_mii (struct net_device *dev, int board_idx)
+void tulip_find_mii(struct net_device *dev, int board_idx)
 {
 	struct tulip_private *tp = netdev_priv(dev);
 	int phyn, phy_idx = 0;

drivers/net/ethernet/dec/tulip/tulip_core.c

@@ -37,7 +37,7 @@
 #include <asm/prom.h>
 #endif
 
-static char version[] __devinitdata =
+static char version[] =
 	"Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n";
 
 /* A few user-configurable values. */
@@ -1191,7 +1191,7 @@ static void set_rx_mode(struct net_device *dev)
 }
 
 #ifdef CONFIG_TULIP_MWI
-static void __devinit tulip_mwi_config (struct pci_dev *pdev,
+static void tulip_mwi_config(struct pci_dev *pdev,
 			     struct net_device *dev)
 {
 	struct tulip_private *tp = netdev_priv(dev);
@@ -1301,7 +1301,7 @@ DEFINE_PCI_DEVICE_TABLE(early_486_chipsets) = {
 	{ },
 };
 
-static int __devinit tulip_init_one (struct pci_dev *pdev,
+static int tulip_init_one(struct pci_dev *pdev,
 			  const struct pci_device_id *ent)
 {
 	struct tulip_private *tp;
@@ -1927,7 +1927,7 @@ static int tulip_resume(struct pci_dev *pdev)
 #endif /* CONFIG_PM */
 
 
-static void __devexit tulip_remove_one (struct pci_dev *pdev)
+static void tulip_remove_one(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata (pdev);
 	struct tulip_private *tp;
@@ -1974,7 +1974,7 @@ static struct pci_driver tulip_driver = {
 	.name		= DRV_NAME,
 	.id_table	= tulip_pci_tbl,
 	.probe		= tulip_init_one,
-	.remove		= __devexit_p(tulip_remove_one),
+	.remove		= tulip_remove_one,
 #ifdef CONFIG_PM
 	.suspend	= tulip_suspend,
 	.resume		= tulip_resume,

drivers/net/ethernet/dec/tulip/uli526x.c

@@ -204,8 +204,8 @@ enum uli526x_CR6_bits {
 };
 
 /* Global variable declaration ----------------------------- */
-static int __devinitdata printed_version;
-static const char version[] __devinitconst =
+static int printed_version;
+static const char version[] =
 	"ULi M5261/M5263 net driver, version " DRV_VERSION " (" DRV_RELDATE ")";
 
 static int uli526x_debug;
@@ -281,7 +281,7 @@ static const struct net_device_ops netdev_ops = {
  *	Search ULI526X board, allocate space and register it
  */
 
-static int __devinit uli526x_init_one (struct pci_dev *pdev,
+static int uli526x_init_one(struct pci_dev *pdev,
 			    const struct pci_device_id *ent)
 {
 	struct uli526x_board_info *db;	/* board information structure */
@@ -436,7 +436,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
 }
 
 
-static void __devexit uli526x_remove_one (struct pci_dev *pdev)
+static void uli526x_remove_one(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct uli526x_board_info *db = netdev_priv(dev);
@@ -1788,7 +1788,7 @@ static struct pci_driver uli526x_driver = {
 	.name		= "uli526x",
 	.id_table	= uli526x_pci_tbl,
 	.probe		= uli526x_init_one,
-	.remove		= __devexit_p(uli526x_remove_one),
+	.remove		= uli526x_remove_one,
 	.suspend	= uli526x_suspend,
 	.resume		= uli526x_resume,
 };

drivers/net/ethernet/dec/tulip/winbond-840.c

@@ -236,7 +236,7 @@ struct pci_id_info {
         int drv_flags;		/* Driver use, intended as capability flags. */
 };
 
-static const struct pci_id_info pci_id_tbl[] __devinitconst = {
+static const struct pci_id_info pci_id_tbl[] = {
 	{ 				/* Sometime a Level-One switch card. */
 	  "Winbond W89c840",	CanHaveMII | HasBrokenTx | FDXOnNoMII},
 	{ "Winbond W89c840",	CanHaveMII | HasBrokenTx},
@@ -358,7 +358,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-static int __devinit w840_probe1 (struct pci_dev *pdev,
+static int w840_probe1(struct pci_dev *pdev,
 		       const struct pci_device_id *ent)
 {
 	struct net_device *dev;
@@ -1532,7 +1532,7 @@ static int netdev_close(struct net_device *dev)
 	return 0;
 }
 
-static void __devexit w840_remove1 (struct pci_dev *pdev)
+static void w840_remove1(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 
@@ -1647,7 +1647,7 @@ static struct pci_driver w840_driver = {
 	.name		= DRV_NAME,
 	.id_table	= w840_pci_tbl,
 	.probe		= w840_probe1,
-	.remove		= __devexit_p(w840_remove1),
+	.remove		= w840_remove1,
 #ifdef CONFIG_PM
 	.suspend	= w840_suspend,
 	.resume		= w840_resume,

drivers/net/ethernet/dec/tulip/xircom_cb.c

@@ -148,7 +148,7 @@ static struct pci_driver xircom_ops = {
 	.name		= "xircom_cb",
 	.id_table	= xircom_pci_table,
 	.probe		= xircom_probe,
-	.remove		= __devexit_p(xircom_remove),
+	.remove		= xircom_remove,
 };
 
 
@@ -190,7 +190,7 @@ static const struct net_device_ops netdev_ops = {
          first two packets that get send, and pump hates that.
 
  */
-static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct device *d = &pdev->dev;
 	struct net_device *dev = NULL;
@@ -312,7 +312,7 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
  Interrupts and such are already stopped in the "ifconfig ethX down"
  code.
  */
-static void __devexit xircom_remove(struct pci_dev *pdev)
+static void xircom_remove(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct xircom_private *card = netdev_priv(dev);