[PATCH] idefloppy: suppress media not present errors

Below is a patch to suppress printing uninformative errors from
ide-floppy.c in response to commands to floppy drives in which no media is
present.

Without this patch, commands sent to ide-floppy devices without media
inserted cause error messages on the console (KERN_ERR level) such as:

ide-floppy: ide: I/O error, pc = 0 key = 2, asc = 3a asq = 0
ide-floppy: ide: I/O error, pc = 1b key = 2, asc = 3a asq = 0
ide-floppy: ide: I/O error, pc = 23 key = 2, asc = 3a asq = 0
ide-floppy: ide: I/O error, pc = 1e key = 2, asc = 3a asq = 0
ide-floppy: ide: I/O error, pc = 1e key = 2, asc = 3a asq = 0

Dell's Virtual Floppy (system management presents to the local system an
IDE floppy device, which is actually a floppy device in a remote system
connected over an IP link) exhibits this also, when connecting to a remote
floppy drive with no media present.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/ide/ide-floppy.c

@@ -989,6 +989,20 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive)
 	return ide_started;
 }
 
+/**
+ * idefloppy_should_report_error()
+ *
+ * Supresses error messages resulting from Medium not present
+ */
+static inline int idefloppy_should_report_error(idefloppy_floppy_t *floppy)
+{
+	if (floppy->sense_key == 0x02 &&
+	    floppy->asc       == 0x3a &&
+	    floppy->ascq      == 0x00)
+		return 0;
+	return 1;
+}
+
 /*
  *	Issue a packet command
  */
@@ -1022,6 +1036,7 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p
 		 */
 		if (!test_bit(PC_ABORT, &pc->flags)) {
 			if (!test_bit(PC_SUPPRESS_ERROR, &pc->flags)) {
+				if (idefloppy_should_report_error(floppy))
 					printk(KERN_ERR "ide-floppy: %s: I/O error, "
 					       "pc = %2x, key = %2x, "
 					       "asc = %2x, ascq = %2x\n",
@@ -1238,11 +1253,13 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request
 			rq->nr_sectors, rq->current_nr_sectors);
 
 	if (rq->errors >= ERROR_MAX) {
-		if (floppy->failed_pc != NULL)
+		if (floppy->failed_pc != NULL) {
+			if (idefloppy_should_report_error(floppy))
 				printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x,"
 				       " key = %2x, asc = %2x, ascq = %2x\n",
 				       drive->name, floppy->failed_pc->c[0],
 				       floppy->sense_key, floppy->asc, floppy->ascq);
+		}
 		else
 			printk(KERN_ERR "ide-floppy: %s: I/O error\n",
 				drive->name);