Commit 7906dd52 authored by Andrew F. Davis's avatar Andrew F. Davis Committed by Jonathan Cameron

iio: ina2xx: Fix whitespace and re-order code

Group of probably overly rigorous whitespace and code cleanups.
 - Alphabetize includes
 - Assign to variables in the order they are defined
 - Alignment issues
 - Group alike statements together
 - Use helper macros
Signed-off-by: default avatarAndrew F. Davis <afd@ti.com>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 2edbd295
......@@ -19,17 +19,18 @@
*
* Configurable 7-bit I2C slave address from 0x40 to 0x4F
*/
#include <linux/module.h>
#include <linux/kthread.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/sysfs.h>
#include <linux/i2c.h>
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/platform_data/ina2xx.h>
#include <linux/util_macros.h>
#include <linux/platform_data/ina2xx.h>
/* INA2XX registers definition */
#define INA2XX_CONFIG 0x00
#define INA2XX_SHUNT_VOLTAGE 0x01 /* readonly */
......@@ -38,7 +39,7 @@
#define INA2XX_CURRENT 0x04 /* readonly */
#define INA2XX_CALIBRATION 0x05
#define INA226_ALERT_MASK 0x06
#define INA226_ALERT_MASK GENMASK(2, 1)
#define INA266_CVRF BIT(3)
#define INA2XX_MAX_REGISTERS 8
......@@ -113,7 +114,7 @@ struct ina2xx_chip_info {
struct mutex state_lock;
unsigned int shunt_resistor;
int avg;
s64 prev_ns; /* track buffer capture time, check for underruns*/
s64 prev_ns; /* track buffer capture time, check for underruns */
int int_time_vbus; /* Bus voltage integration time uS */
int int_time_vshunt; /* Shunt voltage integration time uS */
bool allow_async_readout;
......@@ -149,7 +150,7 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = regmap_read(chip->regmap, chan->address, &regval);
if (ret < 0)
if (ret)
return ret;
if (is_signed_reg(chan->address))
......@@ -285,8 +286,8 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev,
int val, int val2, long mask)
{
struct ina2xx_chip_info *chip = iio_priv(indio_dev);
int ret;
unsigned int config, tmp;
int ret;
if (iio_buffer_enabled(indio_dev))
return -EBUSY;
......@@ -294,8 +295,8 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev,
mutex_lock(&chip->state_lock);
ret = regmap_read(chip->regmap, INA2XX_CONFIG, &config);
if (ret < 0)
goto _err;
if (ret)
goto err;
tmp = config;
......@@ -310,19 +311,19 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev,
else
ret = ina226_set_int_time_vbus(chip, val2, &tmp);
break;
default:
ret = -EINVAL;
}
if (!ret && (tmp != config))
ret = regmap_write(chip->regmap, INA2XX_CONFIG, tmp);
_err:
err:
mutex_unlock(&chip->state_lock);
return ret;
}
static ssize_t ina2xx_allow_async_readout_show(struct device *dev,
struct device_attribute *attr,
char *buf)
......@@ -355,6 +356,7 @@ static int set_shunt_resistor(struct ina2xx_chip_info *chip, unsigned int val)
return -EINVAL;
chip->shunt_resistor = val;
return 0;
}
......@@ -500,7 +502,7 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev)
static int ina2xx_capture_thread(void *data)
{
struct iio_dev *indio_dev = (struct iio_dev *)data;
struct iio_dev *indio_dev = data;
struct ina2xx_chip_info *chip = iio_priv(indio_dev);
unsigned int sampling_us = SAMPLING_PERIOD(chip);
int buffer_us;
......@@ -575,8 +577,7 @@ static int ina2xx_debug_reg(struct iio_dev *indio_dev,
}
/* Possible integration times for vshunt and vbus */
static IIO_CONST_ATTR_INT_TIME_AVAIL \
("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244");
static IIO_CONST_ATTR_INT_TIME_AVAIL("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244");
static IIO_DEVICE_ATTR(in_allow_async_readout, S_IRUGO | S_IWUSR,
ina2xx_allow_async_readout_show,
......@@ -598,21 +599,23 @@ static const struct attribute_group ina2xx_attribute_group = {
};
static const struct iio_info ina2xx_info = {
.debugfs_reg_access = &ina2xx_debug_reg,
.read_raw = &ina2xx_read_raw,
.write_raw = &ina2xx_write_raw,
.attrs = &ina2xx_attribute_group,
.driver_module = THIS_MODULE,
.attrs = &ina2xx_attribute_group,
.read_raw = ina2xx_read_raw,
.write_raw = ina2xx_write_raw,
.debugfs_reg_access = ina2xx_debug_reg,
};
/* Initialize the configuration and calibration registers. */
static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config)
{
u16 regval;
int ret = regmap_write(chip->regmap, INA2XX_CONFIG, config);
int ret;
if (ret < 0)
ret = regmap_write(chip->regmap, INA2XX_CONFIG, config);
if (ret)
return ret;
/*
* Set current LSB to 1mA, shunt is in uOhms
* (equation 13 in datasheet). We hardcode a Current_LSB
......@@ -632,8 +635,8 @@ static int ina2xx_probe(struct i2c_client *client,
struct ina2xx_chip_info *chip;
struct iio_dev *indio_dev;
struct iio_buffer *buffer;
int ret;
unsigned int val;
int ret;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
if (!indio_dev)
......@@ -641,8 +644,19 @@ static int ina2xx_probe(struct i2c_client *client,
chip = iio_priv(indio_dev);
/* This is only used for device removal purposes. */
i2c_set_clientdata(client, indio_dev);
chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
if (IS_ERR(chip->regmap)) {
dev_err(&client->dev, "failed to allocate register map\n");
return PTR_ERR(chip->regmap);
}
chip->config = &ina2xx_config[id->driver_data];
mutex_init(&chip->state_lock);
if (of_property_read_u32(client->dev.of_node,
"shunt-resistor", &val) < 0) {
struct ina2xx_platform_data *pdata =
......@@ -658,25 +672,6 @@ static int ina2xx_probe(struct i2c_client *client,
if (ret)
return ret;
mutex_init(&chip->state_lock);
/* This is only used for device removal purposes. */
i2c_set_clientdata(client, indio_dev);
indio_dev->name = id->name;
indio_dev->channels = ina2xx_channels;
indio_dev->num_channels = ARRAY_SIZE(ina2xx_channels);
indio_dev->dev.parent = &client->dev;
indio_dev->info = &ina2xx_info;
indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
if (IS_ERR(chip->regmap)) {
dev_err(&client->dev, "failed to allocate register map\n");
return PTR_ERR(chip->regmap);
}
/* Patch the current config register with default. */
val = chip->config->config_default;
......@@ -687,24 +682,28 @@ static int ina2xx_probe(struct i2c_client *client,
}
ret = ina2xx_init(chip, val);
if (ret < 0) {
dev_err(&client->dev, "error configuring the device: %d\n",
ret);
return -ENODEV;
if (ret) {
dev_err(&client->dev, "error configuring the device\n");
return ret;
}
indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
indio_dev->dev.parent = &client->dev;
indio_dev->channels = ina2xx_channels;
indio_dev->num_channels = ARRAY_SIZE(ina2xx_channels);
indio_dev->name = id->name;
indio_dev->info = &ina2xx_info;
indio_dev->setup_ops = &ina2xx_setup_ops;
buffer = devm_iio_kfifo_allocate(&indio_dev->dev);
if (!buffer)
return -ENOMEM;
indio_dev->setup_ops = &ina2xx_setup_ops;
iio_device_attach_buffer(indio_dev, buffer);
return iio_device_register(indio_dev);
}
static int ina2xx_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
......@@ -717,7 +716,6 @@ static int ina2xx_remove(struct i2c_client *client)
INA2XX_MODE_MASK, 0);
}
static const struct i2c_device_id ina2xx_id[] = {
{"ina219", ina219},
{"ina220", ina219},
......@@ -726,7 +724,6 @@ static const struct i2c_device_id ina2xx_id[] = {
{"ina231", ina226},
{}
};
MODULE_DEVICE_TABLE(i2c, ina2xx_id);
static struct i2c_driver ina2xx_driver = {
......@@ -737,7 +734,6 @@ static struct i2c_driver ina2xx_driver = {
.remove = ina2xx_remove,
.id_table = ina2xx_id,
};
module_i2c_driver(ina2xx_driver);
MODULE_AUTHOR("Marc Titinger <marc.titinger@baylibre.com>");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment