Merge tag 'v5.15-next-dts32' of...

Merge tag 'v5.15-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt7623: add USB nodes
mt7629: update PCIe node to new format

* tag 'v5.15-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  dt-bindings: arm: Add MT6589 Fairphone 1
  ARM: dts: mediatek: Update MT7629 PCIe node for new format
  arm: dts: mt7623: add otg nodes for bpi-r2
  arm: dts: mt7623: add musb device nodes

Link: https://lore.kernel.org/r/7135d46f-5fb9-b46d-96d4-3b38548fe23e@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/mediatek.yaml

@@ -32,6 +32,7 @@ properties:
           - const: mediatek,mt6580
       - items:
           - enum:
+              - fairphone,fp1
               - mundoreader,bq-aquaris5
           - const: mediatek,mt6589
       - items:

arch/arm/boot/dts/mt7623.dtsi

@@ -585,6 +585,39 @@ spi2: spi@11017000 {
 		status = "disabled";
 	};
 
+	usb0: usb@11200000 {
+		compatible = "mediatek,mt7623-musb",
+			     "mediatek,mtk-musb";
+		reg = <0 0x11200000 0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "mc";
+		phys = <&u2port2 PHY_TYPE_USB2>;
+		dr_mode = "otg";
+		clocks = <&pericfg CLK_PERI_USB0>,
+			 <&pericfg CLK_PERI_USB0_MCU>,
+			 <&pericfg CLK_PERI_USB_SLV>;
+		clock-names = "main","mcu","univpll";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		status = "disabled";
+	};
+
+	u2phy1: t-phy@11210000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x11210000 0 0x0800>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port2: usb-phy@11210800 {
+			reg = <0 0x11210800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+		};
+	};
+
 	audsys: clock-controller@11220000 {
 		compatible = "mediatek,mt7623-audsys",
 			     "mediatek,mt2701-audsys",

arch/arm/boot/dts/mt7623a.dtsi

@@ -35,6 +35,10 @@ &scpsys {
 	clock-names = "ethif";
 };
 
+&usb0 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
 &usb1 {
 	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
 };

arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts

@@ -366,6 +366,14 @@ &pcie1_phy {
 	status = "okay";
 };
 
+&pio {
+	musb_pins: musb {
+		pins-musb {
+			pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>;
+		};
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm_pins_a>;
@@ -396,6 +404,19 @@ &uart2 {
 	status = "okay";
 };
 
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&musb_pins>;
+	status = "okay";
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &usb1 {
 	vusb33-supply = <&reg_3p3v>;
 	vbus-supply = <&reg_5v>;
@@ -408,6 +429,10 @@ &usb2 {
 	status = "okay";
 };
 
+&u2phy1 {
+	status = "okay";
+};
+
 &u3phy1 {
 	status = "okay";
 };

arch/arm/boot/dts/mt7629-rfb.dts

@@ -140,9 +140,10 @@ partition@b0000 {
 	};
 };
 
-&pcie {
+&pcie1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
 };
 
 &pciephy1 {

arch/arm/boot/dts/mt7629.dtsi

@@ -361,16 +361,21 @@ pciesys: syscon@1a100800 {
 			#reset-cells = <1>;
 		};
 
-		pcie: pcie@1a140000 {
+		pciecfg: pciecfg@1a140000 {
+			compatible = "mediatek,generic-pciecfg", "syscon";
+			reg = <0x1a140000 0x1000>;
+		};
+
+		pcie1: pcie@1a145000 {
 			compatible = "mediatek,mt7629-pcie";
 			device_type = "pci";
-			reg = <0x1a140000 0x1000>,
-			      <0x1a145000 0x1000>;
-			reg-names = "subsys","port1";
+			reg = <0x1a145000 0x1000>;
+			reg-names = "port1";
+			linux,pci-domain = <1>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "pcie_irq";
 			clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
 				 <&pciesys CLK_PCIE_P0_AHB_EN>,
 				 <&pciesys CLK_PCIE_P1_AUX_EN>,
@@ -391,28 +396,20 @@ pcie: pcie@1a140000 {
 			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
 			bus-range = <0x00 0xff>;
 			ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+			status = "disabled";
 
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
 			#interrupt-cells = <1>;
-				ranges;
-				num-lanes = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
 					<0 0 0 2 &pcie_intc1 1>,
 					<0 0 0 3 &pcie_intc1 2>,
 					<0 0 0 4 &pcie_intc1 3>;
-
 			pcie_intc1: interrupt-controller {
 				interrupt-controller;
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
 			};
 		};
-		};
 
 		pciephy1: t-phy@1a14a000 {
 			compatible = "mediatek,mt7629-tphy",