Commit 79cbeeaf authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

USB: serial: ch341.c: remove dbg() usage

dbg() was a very old USB-serial-specific macro.
This patch removes it from being used in the
driver and uses dev_dbg() instead.

CC: Johan Hovold <jhovold@gmail.com>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent f80e866f
......@@ -93,8 +93,9 @@ static int ch341_control_out(struct usb_device *dev, u8 request,
u16 value, u16 index)
{
int r;
dbg("ch341_control_out(%02x,%02x,%04x,%04x)", USB_DIR_OUT|0x40,
(int)request, (int)value, (int)index);
dev_dbg(&dev->dev, "ch341_control_out(%02x,%02x,%04x,%04x)\n",
USB_DIR_OUT|0x40, (int)request, (int)value, (int)index);
r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
......@@ -108,8 +109,10 @@ static int ch341_control_in(struct usb_device *dev,
char *buf, unsigned bufsize)
{
int r;
dbg("ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)", USB_DIR_IN|0x40,
(int)request, (int)value, (int)index, buf, (int)bufsize);
dev_dbg(&dev->dev, "ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)\n",
USB_DIR_IN|0x40, (int)request, (int)value, (int)index, buf,
(int)bufsize);
r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
......@@ -320,7 +323,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
if (r)
goto out;
dbg("%s - submitting interrupt urb", __func__);
dev_dbg(&port->dev, "%s - submitting interrupt urb", __func__);
r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (r) {
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
......@@ -390,18 +393,18 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
__func__, r);
goto out;
}
dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x",
dev_dbg(&port->dev, "%s - initial ch341 break register contents - reg1: %x, reg2: %x\n",
__func__, break_reg[0], break_reg[1]);
if (break_state != 0) {
dbg("%s - Enter break state requested", __func__);
dev_dbg(&port->dev, "%s - Enter break state requested\n", __func__);
break_reg[0] &= ~CH341_NBREAK_BITS_REG1;
break_reg[1] &= ~CH341_NBREAK_BITS_REG2;
} else {
dbg("%s - Leave break state requested", __func__);
dev_dbg(&port->dev, "%s - Leave break state requested\n", __func__);
break_reg[0] |= CH341_NBREAK_BITS_REG1;
break_reg[1] |= CH341_NBREAK_BITS_REG2;
}
dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x",
dev_dbg(&port->dev, "%s - New ch341 break register contents - reg1: %x, reg2: %x\n",
__func__, break_reg[0], break_reg[1]);
reg_contents = get_unaligned_le16(break_reg);
r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
......@@ -451,12 +454,12 @@ static void ch341_read_int_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d", __func__,
urb->status);
dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
__func__, urb->status);
return;
default:
dbg("%s - nonzero urb status received: %d", __func__,
urb->status);
dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n",
__func__, urb->status);
goto exit;
}
......@@ -536,15 +539,16 @@ static int ch341_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__, port->number, cmd);
switch (cmd) {
case TIOCMIWAIT:
dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number);
return wait_modem_info(port, arg);
default:
dbg("%s not supported = 0x%04x", __func__, cmd);
dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd);
break;
}
......@@ -572,7 +576,7 @@ static int ch341_tiocmget(struct tty_struct *tty)
| ((status & CH341_BIT_RI) ? TIOCM_RI : 0)
| ((status & CH341_BIT_DCD) ? TIOCM_CD : 0);
dbg("%s - result = %x", __func__, result);
dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
return result;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment