Commit 79cc38de authored by Aneesh Kumar K.V's avatar Aneesh Kumar K.V Committed by Michael Ellerman

powerpc/mm/hugetlb: Add support for reserving gigantic huge pages via kernel command line

With commit aa888a74 ("hugetlb: support larger than MAX_ORDER") we added
support for allocating gigantic hugepages via kernel command line. Switch
ppc64 arch specific code to use that.

W.r.t FSL support, we now limit our allocation range using BOOTMEM_ALLOC_ACCESSIBLE.

We use the kernel command line to do reservation of hugetlb pages on powernv
platforms. On pseries hash mmu mode the supported gigantic huge page size is
16GB and that can only be allocated with hypervisor assist. For pseries the
command line option doesn't do the allocation. Instead pseries does gigantic
hugepage allocation based on hypervisor hint that is specified via
"ibm,expected#pages" property of the memory node.

Cc: Scott Wood <oss@buserror.net>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent e24a1307
...@@ -468,7 +468,7 @@ extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, ...@@ -468,7 +468,7 @@ extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
int psize, int ssize); int psize, int ssize);
int htab_remove_mapping(unsigned long vstart, unsigned long vend, int htab_remove_mapping(unsigned long vstart, unsigned long vend,
int psize, int ssize); int psize, int ssize);
extern void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages); extern void pseries_add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages);
extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr); extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
#ifdef CONFIG_PPC_PSERIES #ifdef CONFIG_PPC_PSERIES
......
...@@ -218,18 +218,4 @@ static inline pte_t *hugepte_offset(hugepd_t hpd, unsigned long addr, ...@@ -218,18 +218,4 @@ static inline pte_t *hugepte_offset(hugepd_t hpd, unsigned long addr,
} }
#endif /* CONFIG_HUGETLB_PAGE */ #endif /* CONFIG_HUGETLB_PAGE */
/*
* FSL Book3E platforms require special gpage handling - the gpages
* are reserved early in the boot process by memblock instead of via
* the .dts as on IBM platforms.
*/
#if defined(CONFIG_HUGETLB_PAGE) && (defined(CONFIG_PPC_FSL_BOOK3E) || \
defined(CONFIG_PPC_8xx))
extern void __init reserve_hugetlb_gpages(void);
#else
static inline void reserve_hugetlb_gpages(void)
{
}
#endif
#endif /* _ASM_POWERPC_HUGETLB_H */ #endif /* _ASM_POWERPC_HUGETLB_H */
...@@ -916,13 +916,6 @@ void __init setup_arch(char **cmdline_p) ...@@ -916,13 +916,6 @@ void __init setup_arch(char **cmdline_p)
/* Reserve large chunks of memory for use by CMA for KVM. */ /* Reserve large chunks of memory for use by CMA for KVM. */
kvm_cma_reserve(); kvm_cma_reserve();
/*
* Reserve any gigantic pages requested on the command line.
* memblock needs to have been initialized by the time this is
* called since this will reserve memory.
*/
reserve_hugetlb_gpages();
klp_init_thread_info(&init_thread_info); klp_init_thread_info(&init_thread_info);
init_mm.start_code = (unsigned long)_stext; init_mm.start_code = (unsigned long)_stext;
......
...@@ -509,7 +509,7 @@ static int __init htab_dt_scan_hugepage_blocks(unsigned long node, ...@@ -509,7 +509,7 @@ static int __init htab_dt_scan_hugepage_blocks(unsigned long node,
phys_addr, block_size, expected_pages); phys_addr, block_size, expected_pages);
if (phys_addr + block_size * expected_pages <= memblock_end_of_DRAM()) { if (phys_addr + block_size * expected_pages <= memblock_end_of_DRAM()) {
memblock_reserve(phys_addr, block_size * expected_pages); memblock_reserve(phys_addr, block_size * expected_pages);
add_gpage(phys_addr, block_size, expected_pages); pseries_add_gpage(phys_addr, block_size, expected_pages);
} }
return 0; return 0;
} }
......
...@@ -36,26 +36,6 @@ ...@@ -36,26 +36,6 @@
unsigned int HPAGE_SHIFT; unsigned int HPAGE_SHIFT;
EXPORT_SYMBOL(HPAGE_SHIFT); EXPORT_SYMBOL(HPAGE_SHIFT);
/*
* Tracks gpages after the device tree is scanned and before the
* huge_boot_pages list is ready. On non-Freescale implementations, this is
* just used to track 16G pages and so is a single array. FSL-based
* implementations may have more than one gpage size, so we need multiple
* arrays
*/
#if defined(CONFIG_PPC_FSL_BOOK3E) || defined(CONFIG_PPC_8xx)
#define MAX_NUMBER_GPAGES 128
struct psize_gpages {
u64 gpage_list[MAX_NUMBER_GPAGES];
unsigned int nr_gpages;
};
static struct psize_gpages gpage_freearray[MMU_PAGE_COUNT];
#else
#define MAX_NUMBER_GPAGES 1024
static u64 gpage_freearray[MAX_NUMBER_GPAGES];
static unsigned nr_gpages;
#endif
#define hugepd_none(hpd) (hpd_val(hpd) == 0) #define hugepd_none(hpd) (hpd_val(hpd) == 0)
pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr, unsigned long sz) pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr, unsigned long sz)
...@@ -210,145 +190,20 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz ...@@ -210,145 +190,20 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz
return hugepte_offset(*hpdp, addr, pdshift); return hugepte_offset(*hpdp, addr, pdshift);
} }
#if defined(CONFIG_PPC_FSL_BOOK3E) || defined(CONFIG_PPC_8xx) #ifdef CONFIG_PPC_BOOK3S_64
/* Build list of addresses of gigantic pages. This function is used in early
* boot before the buddy allocator is setup.
*/
void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages)
{
unsigned int idx = shift_to_mmu_psize(__ffs(page_size));
int i;
if (addr == 0)
return;
gpage_freearray[idx].nr_gpages = number_of_pages;
for (i = 0; i < number_of_pages; i++) {
gpage_freearray[idx].gpage_list[i] = addr;
addr += page_size;
}
}
/*
* Moves the gigantic page addresses from the temporary list to the
* huge_boot_pages list.
*/
int alloc_bootmem_huge_page(struct hstate *hstate)
{
struct huge_bootmem_page *m;
int idx = shift_to_mmu_psize(huge_page_shift(hstate));
int nr_gpages = gpage_freearray[idx].nr_gpages;
if (nr_gpages == 0)
return 0;
#ifdef CONFIG_HIGHMEM
/*
* If gpages can be in highmem we can't use the trick of storing the
* data structure in the page; allocate space for this
*/
m = memblock_virt_alloc(sizeof(struct huge_bootmem_page), 0);
m->phys = gpage_freearray[idx].gpage_list[--nr_gpages];
#else
m = phys_to_virt(gpage_freearray[idx].gpage_list[--nr_gpages]);
#endif
list_add(&m->list, &huge_boot_pages);
gpage_freearray[idx].nr_gpages = nr_gpages;
gpage_freearray[idx].gpage_list[nr_gpages] = 0;
m->hstate = hstate;
return 1;
}
/* /*
* Scan the command line hugepagesz= options for gigantic pages; store those in * Tracks gpages after the device tree is scanned and before the
* a list that we use to allocate the memory once all options are parsed. * huge_boot_pages list is ready on pseries.
*/
unsigned long gpage_npages[MMU_PAGE_COUNT];
static int __init do_gpage_early_setup(char *param, char *val,
const char *unused, void *arg)
{
static phys_addr_t size;
unsigned long npages;
/*
* The hugepagesz and hugepages cmdline options are interleaved. We
* use the size variable to keep track of whether or not this was done
* properly and skip over instances where it is incorrect. Other
* command-line parsing code will issue warnings, so we don't need to.
*
*/ */
if ((strcmp(param, "default_hugepagesz") == 0) || #define MAX_NUMBER_GPAGES 1024
(strcmp(param, "hugepagesz") == 0)) { __initdata static u64 gpage_freearray[MAX_NUMBER_GPAGES];
size = memparse(val, NULL); __initdata static unsigned nr_gpages;
} else if (strcmp(param, "hugepages") == 0) {
if (size != 0) {
if (sscanf(val, "%lu", &npages) <= 0)
npages = 0;
if (npages > MAX_NUMBER_GPAGES) {
pr_warn("MMU: %lu pages requested for page "
#ifdef CONFIG_PHYS_ADDR_T_64BIT
"size %llu KB, limiting to "
#else
"size %u KB, limiting to "
#endif
__stringify(MAX_NUMBER_GPAGES) "\n",
npages, size / 1024);
npages = MAX_NUMBER_GPAGES;
}
gpage_npages[shift_to_mmu_psize(__ffs(size))] = npages;
size = 0;
}
}
return 0;
}
/* /*
* This function allocates physical space for pages that are larger than the * Build list of addresses of gigantic pages. This function is used in early
* buddy allocator can handle. We want to allocate these in highmem because
* the amount of lowmem is limited. This means that this function MUST be
* called before lowmem_end_addr is set up in MMU_init() in order for the lmb
* allocate to grab highmem.
*/
void __init reserve_hugetlb_gpages(void)
{
static __initdata char cmdline[COMMAND_LINE_SIZE];
phys_addr_t size, base;
int i;
strlcpy(cmdline, boot_command_line, COMMAND_LINE_SIZE);
parse_args("hugetlb gpages", cmdline, NULL, 0, 0, 0,
NULL, &do_gpage_early_setup);
/*
* Walk gpage list in reverse, allocating larger page sizes first.
* Skip over unsupported sizes, or sizes that have 0 gpages allocated.
* When we reach the point in the list where pages are no longer
* considered gpages, we're done.
*/
for (i = MMU_PAGE_COUNT-1; i >= 0; i--) {
if (mmu_psize_defs[i].shift == 0 || gpage_npages[i] == 0)
continue;
else if (mmu_psize_to_shift(i) < (MAX_ORDER + PAGE_SHIFT))
break;
size = (phys_addr_t)(1ULL << mmu_psize_to_shift(i));
base = memblock_alloc_base(size * gpage_npages[i], size,
MEMBLOCK_ALLOC_ANYWHERE);
add_gpage(base, size, gpage_npages[i]);
}
}
#else /* !PPC_FSL_BOOK3E */
/* Build list of addresses of gigantic pages. This function is used in early
* boot before the buddy allocator is setup. * boot before the buddy allocator is setup.
*/ */
void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages) void __init pseries_add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages)
{ {
if (!addr) if (!addr)
return; return;
...@@ -360,10 +215,7 @@ void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages) ...@@ -360,10 +215,7 @@ void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages)
} }
} }
/* Moves the gigantic page addresses from the temporary list to the int __init pseries_alloc_bootmem_huge_page(struct hstate *hstate)
* huge_boot_pages list.
*/
int alloc_bootmem_huge_page(struct hstate *hstate)
{ {
struct huge_bootmem_page *m; struct huge_bootmem_page *m;
if (nr_gpages == 0) if (nr_gpages == 0)
...@@ -376,6 +228,17 @@ int alloc_bootmem_huge_page(struct hstate *hstate) ...@@ -376,6 +228,17 @@ int alloc_bootmem_huge_page(struct hstate *hstate)
} }
#endif #endif
int __init alloc_bootmem_huge_page(struct hstate *h)
{
#ifdef CONFIG_PPC_BOOK3S_64
if (firmware_has_feature(FW_FEATURE_LPAR) && !radix_enabled())
return pseries_alloc_bootmem_huge_page(h);
#endif
return __alloc_bootmem_huge_page(h);
}
#if defined(CONFIG_PPC_FSL_BOOK3E) || defined(CONFIG_PPC_8xx) #if defined(CONFIG_PPC_FSL_BOOK3E) || defined(CONFIG_PPC_8xx)
#define HUGEPD_FREELIST_SIZE \ #define HUGEPD_FREELIST_SIZE \
((PAGE_SIZE - sizeof(struct hugepd_freelist)) / sizeof(pte_t)) ((PAGE_SIZE - sizeof(struct hugepd_freelist)) / sizeof(pte_t))
......
...@@ -138,8 +138,6 @@ void __init MMU_init(void) ...@@ -138,8 +138,6 @@ void __init MMU_init(void)
* Reserve gigantic pages for hugetlb. This MUST occur before * Reserve gigantic pages for hugetlb. This MUST occur before
* lowmem_end_addr is initialized below. * lowmem_end_addr is initialized below.
*/ */
reserve_hugetlb_gpages();
if (memblock.memory.cnt > 1) { if (memblock.memory.cnt > 1) {
#ifndef CONFIG_WII #ifndef CONFIG_WII
memblock_enforce_memory_limit(memblock.memory.regions[0].size); memblock_enforce_memory_limit(memblock.memory.regions[0].size);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment