Commit 79f2056b authored by David S. Miller's avatar David S. Miller

Merge branch 'phy-dp83867-enable-robust-auto-mdix'

Grygorii Strashko says:

====================
net: phy: dp83867: enable robust auto-mdix

Patch 1 - improves link detection when dp83867 PHY is configured in manual mode
by enabling CFG3[9] Robust Auto-MDIX option.

Patch 2 - is minor optimization.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 546b85bb ef87f7da
......@@ -95,6 +95,10 @@
#define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK (0x1f << 8)
#define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT 8
/* CFG3 bits */
#define DP83867_CFG3_INT_OE BIT(7)
#define DP83867_CFG3_ROBUST_AUTO_MDIX BIT(9)
/* CFG4 bits */
#define DP83867_CFG4_PORT_MIRROR_EN BIT(0)
......@@ -295,7 +299,7 @@ static int dp83867_probe(struct phy_device *phydev)
phydev->priv = dp83867;
return 0;
return dp83867_of_init(phydev);
}
static int dp83867_config_init(struct phy_device *phydev)
......@@ -304,10 +308,6 @@ static int dp83867_config_init(struct phy_device *phydev)
int ret, val, bs;
u16 delay;
ret = dp83867_of_init(phydev);
if (ret)
return ret;
/* RX_DV/RX_CTRL strapped in mode 1 or mode 2 workaround */
if (dp83867->rxctrl_strap_quirk)
phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
......@@ -410,12 +410,13 @@ static int dp83867_config_init(struct phy_device *phydev)
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL, val);
}
/* Enable Interrupt output INT_OE in CFG3 register */
if (phy_interrupt_is_valid(phydev)) {
val = phy_read(phydev, DP83867_CFG3);
val |= BIT(7);
/* Enable Interrupt output INT_OE in CFG3 register */
if (phy_interrupt_is_valid(phydev))
val |= DP83867_CFG3_INT_OE;
val |= DP83867_CFG3_ROBUST_AUTO_MDIX;
phy_write(phydev, DP83867_CFG3, val);
}
if (dp83867->port_mirroring != DP83867_PORT_MIRROING_KEEP)
dp83867_config_port_mirroring(phydev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment