arm64: dts: qcom: replace status value "ok" by "okay"

While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Link: https://lore.kernel.org/r/20200830200845.1771-1-freifunk@adrianschmutzler.deSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

@@ -585,7 +585,7 @@ button@0 {
 };
 
 &camss {
-	status = "ok";
+	status = "okay";
 	ports {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -602,7 +602,7 @@ csiphy0_ep: endpoint {
 };
 
 &cci {
-	status = "ok";
+	status = "okay";
 };
 
 &cci_i2c0 {

arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts

@@ -26,18 +26,18 @@ chosen {
 &blsp1_uart3 {
 	pinctrl-0 = <&serial_3_pins>;
 	pinctrl-names = "default";
-	status = "ok";
+	status = "okay";
 };
 
 &i2c_1 {
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
-	status = "ok";
+	status = "okay";
 };
 
 &spi_0 {
 	cs-select = <0>;
-	status = "ok";
+	status = "okay";
 
 	m25p80@0 {
 		#address-cells = <1>;

arch/arm64/boot/dts/qcom/ipq8074-hk01.dts

@@ -27,11 +27,11 @@ memory {
 };
 
 &blsp1_i2c2 {
-	status = "ok";
+	status = "okay";
 };
 
 &blsp1_spi1 {
-	status = "ok";
+	status = "okay";
 
 	m25p80@0 {
 		#address-cells = <1>;
@@ -43,37 +43,37 @@ m25p80@0 {
 };
 
 &blsp1_uart3 {
-	status = "ok";
+	status = "okay";
 };
 
 &blsp1_uart5 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 	perst-gpio = <&tlmm 61 0x1>;
 };
 
 &pcie1 {
-	status = "ok";
+	status = "okay";
 	perst-gpio = <&tlmm 58 0x1>;
 };
 
 &pcie_phy0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie_phy1 {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_bam {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_nand {
-	status = "ok";
+	status = "okay";
 
 	nand@0 {
 		reg = <0>;
@@ -84,29 +84,29 @@ nand@0 {
 };
 
 &sdhc_1 {
-	status = "ok";
+	status = "okay";
 };
 
 &qusb_phy_0 {
-	status = "ok";
+	status = "okay";
 };
 
 &qusb_phy_1 {
-	status = "ok";
+	status = "okay";
 };
 
 &ssphy_0 {
-	status = "ok";
+	status = "okay";
 };
 
 &ssphy_1 {
-	status = "ok";
+	status = "okay";
 };
 
 &usb_0 {
-	status = "ok";
+	status = "okay";
 };
 
 &usb_1 {
-	status = "ok";
+	status = "okay";
 };

arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts

@@ -13,7 +13,7 @@ / {
 };
 
 &ethernet {
-	status = "ok";
+	status = "okay";
 
 	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;

arch/arm64/boot/dts/qcom/qcs404-evb.dtsi

@@ -97,7 +97,7 @@ pms405_s3: s3 {
 };
 
 &pcie {
-	status = "ok";
+	status = "okay";
 
 	perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>;
 
@@ -106,22 +106,22 @@ &pcie {
 };
 
 &pcie_phy {
-	status = "ok";
+	status = "okay";
 
 	vdda-vp-supply = <&vreg_l3_1p05>;
 	vdda-vph-supply = <&vreg_l5_1p8>;
 };
 
 &remoteproc_adsp {
-	status = "ok";
+	status = "okay";
 };
 
 &remoteproc_cdsp {
-	status = "ok";
+	status = "okay";
 };
 
 &remoteproc_wcss {
-	status = "ok";
+	status = "okay";
 };
 
 &rpm_requests {
@@ -215,7 +215,7 @@ vreg_l13_3p3: l13 {
 };
 
 &sdcc1 {
-	status = "ok";
+	status = "okay";
 
 	supports-cqe;
 	mmc-ddr-1_8v;

arch/arm64/boot/dts/qcom/sdm845-db845c.dts

@@ -1103,7 +1103,7 @@ &pm8998_gpio {
 };
 
 &cci {
-	status = "ok";
+	status = "okay";
 };
 
 &cci_i2c0 {