Skip to content

L
linux
Commit 7a372650 authored by David Lin's avatar David Lin Committed by Mark Brown
Browse files
Options

ASoC: nau8825: Add a manually mechanism for detection failure 

This patch is to use saradc to check the jack type when auto
detection is still failure.
Signed-off-by: default avatarDavid Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20221122073855.43024-2-CTLIN0@nuvoton.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent fa0fb073
Show whitespace changes
Inline Side-by-side
Showing with 148 additions and 3 deletions
sound/soc/codecs/nau8825.c
View file @ 7a372650
......@@ -1736,6 +1736,121 @@ static int nau8825_button_decode(int value)
return buttons;
}
static int nau8825_high_imped_detection(struct nau8825 *nau8825)
{
struct regmap *regmap = nau8825->regmap;
struct snd_soc_dapm_context *dapm = nau8825->dapm;
unsigned int adc_mg1, adc_mg2;
/* Initial phase */
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R |
NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2);
regmap_update_bits(regmap, NAU8825_REG_ANALOG_CONTROL_1,
NAU8825_TESTDACIN_MASK, NAU8825_TESTDACIN_GND);
regmap_write(regmap, NAU8825_REG_TRIM_SETTINGS, 0x6);
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
NAU8825_MICBIAS_LOWNOISE_MASK | NAU8825_MICBIAS_VOLTAGE_MASK,
NAU8825_MICBIAS_LOWNOISE_EN);
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_INPUT_MASK | NAU8825_SAR_TRACKING_GAIN_MASK |
NAU8825_SAR_HV_SEL_MASK | NAU8825_SAR_RES_SEL_MASK |
NAU8825_SAR_COMPARE_TIME_MASK | NAU8825_SAR_SAMPLING_TIME_MASK,
NAU8825_SAR_HV_SEL_VDDMIC | NAU8825_SAR_RES_SEL_70K);
snd_soc_dapm_force_enable_pin(dapm, "MICBIAS");
snd_soc_dapm_force_enable_pin(dapm, "SAR");
snd_soc_dapm_sync(dapm);
/* Configure settings for first reading of SARADC */
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R |
NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND2);
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
NAU8825_MICBIAS_JKR2);
regmap_read(regmap, NAU8825_REG_SARDOUT_RAM_STATUS, &adc_mg1);
/* Configure settings for second reading of SARADC */
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0);
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R |
NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 |
NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L);
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R |
NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND1);
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
NAU8825_MICBIAS_JKSLV);
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_INPUT_MASK, NAU8825_SAR_INPUT_JKSLV);
regmap_read(regmap, NAU8825_REG_SARDOUT_RAM_STATUS, &adc_mg2);
/* Disable phase */
snd_soc_dapm_disable_pin(dapm, "SAR");
snd_soc_dapm_disable_pin(dapm, "MICBIAS");
snd_soc_dapm_sync(dapm);
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_LOWNOISE_MASK |
NAU8825_MICBIAS_VOLTAGE_MASK, nau8825->micbias_voltage);
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R |
NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 |
NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L);
regmap_update_bits(regmap, NAU8825_REG_ANALOG_CONTROL_1,
NAU8825_TESTDACIN_MASK, NAU8825_TESTDACIN_GND);
regmap_write(regmap, NAU8825_REG_TRIM_SETTINGS, 0);
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_TRACKING_GAIN_MASK | NAU8825_SAR_HV_SEL_MASK,
nau8825->sar_voltage << NAU8825_SAR_TRACKING_GAIN_SFT);
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_COMPARE_TIME_MASK | NAU8825_SAR_SAMPLING_TIME_MASK,
(nau8825->sar_compare_time << NAU8825_SAR_COMPARE_TIME_SFT) |
(nau8825->sar_sampling_time << NAU8825_SAR_SAMPLING_TIME_SFT));
dev_dbg(nau8825->dev, "adc_mg1:%x, adc_mg2:%x\n", adc_mg1, adc_mg2);
/* Confirmation phase */
if (adc_mg1 > adc_mg2) {
dev_dbg(nau8825->dev, "OMTP (micgnd1) mic connected\n");
/* Unground MICGND1 */
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2,
NAU8825_SPKR_ENGND2);
/* Attach 2kOhm Resistor from MICBIAS to MICGND1 */
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
NAU8825_MICBIAS_JKR2);
/* Attach SARADC to MICGND1 */
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_INPUT_MASK,
NAU8825_SAR_INPUT_JKR2);
} else if (adc_mg1 < adc_mg2) {
dev_dbg(nau8825->dev, "CTIA (micgnd2) mic connected\n");
/* Unground MICGND2 */
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2,
NAU8825_SPKR_ENGND1);
/* Attach 2kOhm Resistor from MICBIAS to MICGND2 */
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
NAU8825_MICBIAS_JKSLV);
/* Attach SARADC to MICGND2 */
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
NAU8825_SAR_INPUT_MASK,
NAU8825_SAR_INPUT_JKSLV);
} else {
dev_err(nau8825->dev, "Jack broken.\n");
return -EINVAL;
}
return 0;
}
static int nau8825_jack_insert(struct nau8825 *nau8825)
{
struct regmap *regmap = nau8825->regmap;
......@@ -1797,8 +1912,15 @@ static int nau8825_jack_insert(struct nau8825 *nau8825)
snd_soc_dapm_sync(dapm);
break;
case 3:
/* detect error case */
dev_err(nau8825->dev, "detection error; disable mic function\n");
/* Detection failure case */
dev_warn(nau8825->dev,
"Detection failure. Try the manually mechanism for jack type checking.\n");
if (!nau8825_high_imped_detection(nau8825)) {
type = SND_JACK_HEADSET;
snd_soc_dapm_force_enable_pin(dapm, "MICBIAS");
snd_soc_dapm_force_enable_pin(dapm, "SAR");
snd_soc_dapm_sync(dapm);
} else
type = SND_JACK_HEADPHONE;
break;
}
......
sound/soc/codecs/nau8825.h
View file @ 7a372650
......@@ -155,6 +155,8 @@
/* HSD_CTRL (0xc) */
#define NAU8825_HSD_AUTO_MODE (1 << 6)
/* 0 - open, 1 - short to GND */
#define NAU8825_SPKR_ENGND1 (1 << 3)
#define NAU8825_SPKR_ENGND2 (1 << 2)
#define NAU8825_SPKR_DWN1R (1 << 1)
#define NAU8825_SPKR_DWN1L (1 << 0)
......@@ -207,6 +209,17 @@
#define NAU8825_SAR_INPUT_JKR2 (0 << 11)
#define NAU8825_SAR_TRACKING_GAIN_SFT 8
#define NAU8825_SAR_TRACKING_GAIN_MASK (0x7 << NAU8825_SAR_TRACKING_GAIN_SFT)
#define NAU8825_SAR_HV_SEL_SFT 7
#define NAU8825_SAR_HV_SEL_MASK (1 << NAU8825_SAR_HV_SEL_SFT)
#define NAU8825_SAR_HV_SEL_MICBIAS (0 << NAU8825_SAR_HV_SEL_SFT)
#define NAU8825_SAR_HV_SEL_VDDMIC (1 << NAU8825_SAR_HV_SEL_SFT)
#define NAU8825_SAR_RES_SEL_SFT 4
#define NAU8825_SAR_RES_SEL_MASK (0x7 << NAU8825_SAR_RES_SEL_SFT)
#define NAU8825_SAR_RES_SEL_35K (0 << NAU8825_SAR_RES_SEL_SFT)
#define NAU8825_SAR_RES_SEL_70K (1 << NAU8825_SAR_RES_SEL_SFT)
#define NAU8825_SAR_RES_SEL_170K (2 << NAU8825_SAR_RES_SEL_SFT)
#define NAU8825_SAR_RES_SEL_360K (3 << NAU8825_SAR_RES_SEL_SFT)
#define NAU8825_SAR_RES_SEL_SHORTED (4 << NAU8825_SAR_RES_SEL_SFT)
#define NAU8825_SAR_COMPARE_TIME_SFT 2
#define NAU8825_SAR_COMPARE_TIME_MASK (3 << 2)
#define NAU8825_SAR_SAMPLING_TIME_SFT 0
......@@ -385,6 +398,13 @@
#define NAU8825_BIAS_VMID_SEL_SFT 4
#define NAU8825_BIAS_VMID_SEL_MASK (3 << NAU8825_BIAS_VMID_SEL_SFT)
/* ANALOG_CONTROL_1 (0x69) */
#define NAU8825_TESTDACIN_SFT 14
#define NAU8825_TESTDACIN_MASK (0x3 << NAU8825_TESTDACIN_SFT)
#define NAU8825_TESTDACIN_HIGH (1 << NAU8825_TESTDACIN_SFT)
#define NAU8825_TESTDACIN_LOW (2 << NAU8825_TESTDACIN_SFT)
#define NAU8825_TESTDACIN_GND (3 << NAU8825_TESTDACIN_SFT)
/* ANALOG_CONTROL_2 (0x6a) */
#define NAU8825_HP_NON_CLASSG_CURRENT_2xADJ (1 << 12)
#define NAU8825_DAC_CAPACITOR_MSB (1 << 1)
......@@ -412,6 +432,9 @@
/* MIC_BIAS (0x74) */
#define NAU8825_MICBIAS_JKSLV (1 << 14)
#define NAU8825_MICBIAS_JKR2 (1 << 12)
#define NAU8825_MICBIAS_LOWNOISE_SFT 10
#define NAU8825_MICBIAS_LOWNOISE_MASK (0x1 << NAU8825_MICBIAS_LOWNOISE_SFT)
#define NAU8825_MICBIAS_LOWNOISE_EN (0x1 << NAU8825_MICBIAS_LOWNOISE_SFT)
#define NAU8825_MICBIAS_POWERUP_SFT 8
#define NAU8825_MICBIAS_VOLTAGE_SFT 0
#define NAU8825_MICBIAS_VOLTAGE_MASK 0x7
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7