ARM: plat-iop: instantiate GPIO from platform device

This converts the IOP32x and IOP33x platforms to pass their
base address offset by a resource attached to a platform device
instead of using static offset macros implicitly passed
through <linux/gpio.h> including <mach/gpio.h>. Delete the
local <mach/gpio.h> and <asm/hardware/iop3xx-gpio.h> headers
and remove the selection of NEED_MACH_GPIO_H.

Pass the virtual address as a resource in the platform device
at this point for bisectability, next patch will pass the
physical address as is custom.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/Kconfig

@@ -458,7 +458,6 @@ config ARCH_IOP32X
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select GPIO_IOP
-	select NEED_MACH_GPIO_H
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@@ -472,7 +471,6 @@ config ARCH_IOP33X
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select GPIO_IOP
-	select NEED_MACH_GPIO_H
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP

arch/arm/include/asm/hardware/iop3xx-gpio.h

-/*
- * arch/arm/include/asm/hardware/iop3xx-gpio.h
- *
- * IOP3xx GPIO wrappers
- *
- * Copyright (c) 2008 Arnaud Patard <arnaud.patard@rtp-net.org>
- * Based on IXP4XX gpio.h file
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-
-#include <mach/hardware.h>
-#include <asm-generic/gpio.h>
-
-#endif
-

arch/arm/include/asm/hardware/iop3xx.h

@@ -18,10 +18,6 @@
 /*
  * IOP3XX GPIO handling
  */
-#define GPIO_IN			0
-#define GPIO_OUT		1
-#define GPIO_LOW		0
-#define GPIO_HIGH		1
 #define IOP3XX_GPIO_LINE(x)	(x)
 
 #ifndef __ASSEMBLY__
@@ -165,11 +161,6 @@ extern int iop3xx_get_init_atu(void);
 /* PERCR0 DOESN'T EXIST - index from 1! */
 #define IOP3XX_PERCR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
 
-/* General Purpose I/O  */
-#define IOP3XX_GPOE		(volatile u32 *)IOP3XX_GPIO_REG(0x0000)
-#define IOP3XX_GPID		(volatile u32 *)IOP3XX_GPIO_REG(0x0004)
-#define IOP3XX_GPOD		(volatile u32 *)IOP3XX_GPIO_REG(0x0008)
-
 /* Timers  */
 #define IOP3XX_TU_TMR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0000)
 #define IOP3XX_TU_TMR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0004)

arch/arm/mach-iop32x/em7210.c

@@ -32,6 +32,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 static void __init em7210_timer_init(void)
 {
@@ -183,6 +184,7 @@ void em7210_power_off(void)
 
 static void __init em7210_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&em7210_serial_device);
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);

arch/arm/mach-iop32x/glantank.c

@@ -34,6 +34,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * GLAN Tank timer tick configuration.
@@ -187,6 +188,7 @@ static void glantank_power_off(void)
 
 static void __init glantank_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&glantank_flash_device);

arch/arm/mach-iop32x/gpio-iop32x.h

+static struct resource iop32x_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4), 0x10),
+};
+
+static inline void register_iop32x_gpio(void)
+{
+	platform_device_register_simple("gpio-iop", 0,
+					iop32x_gpio_res,
+					ARRAY_SIZE(iop32x_gpio_res));
+}

arch/arm/mach-iop32x/include/mach/gpio.h

-#ifndef __ASM_ARCH_IOP32X_GPIO_H
-#define __ASM_ARCH_IOP32X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif

arch/arm/mach-iop32x/include/mach/iop32x.h

@@ -19,7 +19,6 @@
  * Peripherals that are shared between the iop32x and iop33x but
  * located at different addresses.
  */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
 #define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
 
 #include <asm/hardware/iop3xx.h>

arch/arm/mach-iop32x/iq31244.c

@@ -37,6 +37,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
@@ -283,6 +284,7 @@ void ep80219_power_off(void)
 
 static void __init iq31244_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iq31244_flash_device);

arch/arm/mach-iop32x/iq80321.c

@@ -33,6 +33,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * IQ80321 timer tick configuration.
@@ -170,6 +171,7 @@ static struct platform_device iq80321_serial_device = {
 
 static void __init iq80321_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iq80321_flash_device);

arch/arm/mach-iop32x/n2100.c

@@ -41,6 +41,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <mach/time.h>
+#include "gpio-iop32x.h"
 
 /*
  * N2100 timer tick configuration.
@@ -345,6 +346,7 @@ device_initcall(n2100_request_gpios);
 
 static void __init n2100_init_machine(void)
 {
+	register_iop32x_gpio();
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&n2100_flash_device);
 	platform_device_register(&n2100_serial_device);

arch/arm/mach-iop33x/include/mach/gpio.h

-#ifndef __ASM_ARCH_IOP33X_GPIO_H
-#define __ASM_ARCH_IOP33X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif

arch/arm/mach-iop33x/include/mach/iop33x.h

@@ -18,7 +18,6 @@
  * Peripherals that are shared between the iop32x and iop33x but
  * located at different addresses.
  */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
 #define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
 
 #include <asm/hardware/iop3xx.h>

arch/arm/mach-iop33x/iq80331.c

@@ -122,8 +122,15 @@ static struct platform_device iq80331_flash_device = {
 	.resource	= &iq80331_flash_resource,
 };
 
+static struct resource iq80331_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780), 0x10),
+};
+
 static void __init iq80331_init_machine(void)
 {
+	platform_device_register_simple("gpio-iop", 0,
+					iq80331_gpio_res,
+					ARRAY_SIZE(iq80331_gpio_res));
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iop33x_uart0_device);

arch/arm/mach-iop33x/iq80332.c

@@ -122,8 +122,15 @@ static struct platform_device iq80332_flash_device = {
 	.resource	= &iq80332_flash_resource,
 };
 
+static struct resource iq80332_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780), 0x10),
+};
+
 static void __init iq80332_init_machine(void)
 {
+	platform_device_register_simple("gpio-iop", 0,
+					iq80332_gpio_res,
+					ARRAY_SIZE(iq80332_gpio_res));
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&iop3xx_i2c1_device);
 	platform_device_register(&iop33x_uart0_device);

drivers/gpio/gpio-iop.c

@@ -16,9 +16,23 @@
 #include <linux/errno.h>
 #include <linux/gpio.h>
 #include <linux/export.h>
+#include <linux/platform_device.h>
 
 #define IOP3XX_N_GPIOS	8
 
+#define GPIO_IN			0
+#define GPIO_OUT		1
+#define GPIO_LOW		0
+#define GPIO_HIGH		1
+
+/* Memory base offset */
+static void __iomem *base;
+
+#define IOP3XX_GPIO_REG(reg)	(base + (reg))
+#define IOP3XX_GPOE		(volatile u32 *)IOP3XX_GPIO_REG(0x0000)
+#define IOP3XX_GPID		(volatile u32 *)IOP3XX_GPIO_REG(0x0004)
+#define IOP3XX_GPOD		(volatile u32 *)IOP3XX_GPIO_REG(0x0008)
+
 static void gpio_line_config(int line, int direction)
 {
 	unsigned long flags;
@@ -83,8 +97,26 @@ static struct gpio_chip iop3xx_chip = {
 	.ngpio			= IOP3XX_N_GPIOS,
 };
 
-static int __init iop3xx_gpio_setup(void)
+static int iop3xx_gpio_probe(struct platform_device *pdev)
 {
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = (void *) res->start;
+
 	return gpiochip_add(&iop3xx_chip);
 }
-arch_initcall(iop3xx_gpio_setup);
+
+static struct platform_driver iop3xx_gpio_driver = {
+	.driver = {
+		.name = "gpio-iop",
+		.owner = THIS_MODULE,
+	},
+	.probe = iop3xx_gpio_probe,
+};
+
+static int __init iop3xx_gpio_init(void)
+{
+	return platform_driver_register(&iop3xx_gpio_driver);
+}
+arch_initcall(iop3xx_gpio_init);