net: stmmac: stmmac interrupt treatment prepared for multiple queues

This patch prepares the main ISR for multiple queues.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -3115,6 +3115,12 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 {
 	struct net_device *dev = (struct net_device *)dev_id;
 	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 rx_cnt = priv->plat->rx_queues_to_use;
+	u32 tx_cnt = priv->plat->tx_queues_to_use;
+	u32 queues_count;
+	u32 queue;
+
+	queues_count = (rx_cnt > tx_cnt) ? rx_cnt : tx_cnt;
 
 	if (priv->irq_wake)
 		pm_wakeup_event(priv->device, 0);
@@ -3129,20 +3135,26 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 		int status = priv->hw->mac->host_irq_status(priv->hw,
 							    &priv->xstats);
 
-		if (priv->synopsys_id >= DWMAC_CORE_4_00)
-			status |= priv->hw->mac->host_mtl_irq_status(priv->hw,
-								STMMAC_CHAN0);
-
 		if (unlikely(status)) {
 			/* For LPI we need to save the tx status */
 			if (status & CORE_IRQ_TX_PATH_IN_LPI_MODE)
 				priv->tx_path_in_lpi_mode = true;
 			if (status & CORE_IRQ_TX_PATH_EXIT_LPI_MODE)
 				priv->tx_path_in_lpi_mode = false;
-			if (status & CORE_IRQ_MTL_RX_OVERFLOW && priv->hw->dma->set_rx_tail_ptr)
+		}
+
+		if (priv->synopsys_id >= DWMAC_CORE_4_00) {
+			for (queue = 0; queue < queues_count; queue++) {
+				status |=
+				priv->hw->mac->host_mtl_irq_status(priv->hw,
+								   queue);
+
+				if (status & CORE_IRQ_MTL_RX_OVERFLOW &&
+				    priv->hw->dma->set_rx_tail_ptr)
 					priv->hw->dma->set_rx_tail_ptr(priv->ioaddr,
 								priv->rx_tail_addr,
-							STMMAC_CHAN0);
+								queue);
+			}
 		}
 
 		/* PCS link status */