Commit 7bb2fe59 authored by Arnaud Ebalard's avatar Arnaud Ebalard Committed by Jason Cooper

arm: mvebu: Clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts file

On NETGEAR ReadyNAS 102, the two disks are connected to the external
Marvell 88SE9170 SATA Controller connected to the PCIe bus. The rear
eSATA port is connected to the native Armada 370 SATA controller.

This patch updates the comments in .dts file wrt SATA interfaces and
reduces the number of ports for native Armada 370 interface from 2
to 1.
Signed-off-by: default avatarArnaud Ebalard <arno@natisbad.org>
Acked-by: default avatarAndrew Lunn <andrew@lunn.ch>
Acked-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/4af680f9a68281755e31df2491f0590046138230.1414185031.git.arno@natisbad.orgSigned-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 3622daf8
...@@ -35,7 +35,7 @@ soc { ...@@ -35,7 +35,7 @@ soc {
pcie-controller { pcie-controller {
status = "okay"; status = "okay";
/* Connected to Marvell SATA controller */ /* Connected to Marvell 88SE9170 SATA controller */
pcie@1,0 { pcie@1,0 {
/* Port 0, Lane 0 */ /* Port 0, Lane 0 */
status = "okay"; status = "okay";
...@@ -53,8 +53,9 @@ serial@12000 { ...@@ -53,8 +53,9 @@ serial@12000 {
status = "okay"; status = "okay";
}; };
/* eSATA interface */
sata@a0000 { sata@a0000 {
nr-ports = <2>; nr-ports = <1>;
status = "okay"; status = "okay";
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment