Skip to content

L
linux
Commit 7c2db36e authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'akpm' (incoming from Andrew) 

Merge misc patches from Andrew Morton:

 - Florian has vanished so I appear to have become fbdev maintainer
   again :(

 - Joel and Mark are distracted to welcome to the new OCFS2 maintainer

 - The backlight queue

 - Small core kernel changes

 - lib/ updates

 - The rtc queue

 - Various random bits

* akpm: (164 commits)
  rtc: rtc-davinci: use devm_*() functions
  rtc: rtc-max8997: use devm_request_threaded_irq()
  rtc: rtc-max8907: use devm_request_threaded_irq()
  rtc: rtc-da9052: use devm_request_threaded_irq()
  rtc: rtc-wm831x: use devm_request_threaded_irq()
  rtc: rtc-tps80031: use devm_request_threaded_irq()
  rtc: rtc-lp8788: use devm_request_threaded_irq()
  rtc: rtc-coh901331: use devm_clk_get()
  rtc: rtc-vt8500: use devm_*() functions
  rtc: rtc-tps6586x: use devm_request_threaded_irq()
  rtc: rtc-imxdi: use devm_clk_get()
  rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug()
  rtc: rtc-pcf8583: use dev_warn() instead of printk()
  rtc: rtc-sun4v: use pr_warn() instead of printk()
  rtc: rtc-vr41xx: use dev_info() instead of printk()
  rtc: rtc-rs5c313: use pr_err() instead of printk()
  rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug()
  rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug()
  rtc: rtc-ds2404: use dev_err() instead of printk()
  rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk()
  ...
parents 8b5628ab a47a376f
Expand all Show whitespace changes
Inline Side-by-side
Showing with 9671 additions and 1297 deletions
Documentation/ABI/testing/sysfs-class-bdi
View file @ 7c2db36e
......@@ -48,3 +48,8 @@ max_ratio (read-write)
most of the write-back cache. For example in case of an NFS
mount that is prone to get stuck, or a FUSE mount which cannot
be trusted to play fair.
stable_pages_required (read-only)
If set, the backing device requires that all pages comprising a write
request must not be changed until writeout is complete.
Documentation/backlight/lp855x-driver.txt
View file @ 7c2db36e
......@@ -4,7 +4,7 @@ Kernel driver lp855x
Backlight driver for LP855x ICs
Supported chips:
Texas Instruments LP8550, LP8551, LP8552, LP8553 and LP8556
Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
Author: Milo(Woogyom) Kim <milo.kim@ti.com>
......@@ -24,7 +24,7 @@ Value : pwm based or register based
2) chip_id
The lp855x chip id.
Value : lp8550/lp8551/lp8552/lp8553/lp8556
Value : lp8550/lp8551/lp8552/lp8553/lp8556/lp8557
Platform data for lp855x
------------------------
......
Documentation/devicetree/booting-without-of.txt
View file @ 7c2db36e
......@@ -1228,7 +1228,7 @@ hierarchy and routing of interrupts in the hardware.
The interrupt tree model is fully described in the
document "Open Firmware Recommended Practice: Interrupt
Mapping Version 0.9". The document is available at:
<http://playground.sun.com/1275/practice>.
<http://www.openfirmware.org/ofwg/practice/>
1) interrupts property
----------------------
......
Documentation/printk-formats.txt
View file @ 7c2db36e
......@@ -53,6 +53,14 @@ Struct Resources:
For printing struct resources. The 'R' and 'r' specifiers result in a
printed resource with ('R') or without ('r') a decoded flags member.
Physical addresses:
%pa 0x01234567 or 0x0123456789abcdef
For printing a phys_addr_t type (and its derivatives, such as
resource_size_t) which can vary based on build options, regardless of
the width of the CPU data path. Passed by reference.
Raw buffer as a hex string:
%*ph 00 01 02 ... 3f
%*phC 00:01:02: ... :3f
......@@ -150,9 +158,9 @@ s64 SHOULD be printed with %lld/%llx, (long long):
printk("%lld", (long long)s64_var);
If <type> is dependent on a config option for its size (e.g., sector_t,
blkcnt_t, phys_addr_t, resource_size_t) or is architecture-dependent
for its size (e.g., tcflag_t), use a format specifier of its largest
possible type and explicitly cast to it. Example:
blkcnt_t) or is architecture-dependent for its size (e.g., tcflag_t), use a
format specifier of its largest possible type and explicitly cast to it.
Example:
printk("test: sector number/total blocks: %llu/%llu\n",
(unsigned long long)sector, (unsigned long long)blockcount);
......
MAINTAINERS
View file @ 7c2db36e
......@@ -1956,7 +1956,8 @@ F: drivers/misc/*
CHECKPATCH
M: Andy Whitcroft <apw@canonical.com>
S: Supported
M: Joe Perches <joe@perches.com>
S: Maintained
F: scripts/checkpatch.pl
CHINESE DOCUMENTATION
......@@ -5035,6 +5036,10 @@ L: linux-mm@kvack.org
W: http://www.linux-mm.org
S: Maintained
F: include/linux/mm.h
F: include/linux/gfp.h
F: include/linux/mmzone.h
F: include/linux/memory_hotplug.h
F: include/linux/vmalloc.h
F: mm/
MEMORY RESOURCE CONTROLLER
......
arch/alpha/kernel/osf_sys.c
View file @ 7c2db36e
......@@ -1300,17 +1300,15 @@ static unsigned long
arch_get_unmapped_area_1(unsigned long addr, unsigned long len,
unsigned long limit)
{
struct vm_area_struct *vma = find_vma(current->mm, addr);
while (1) {
/* At this point: (!vma || addr < vma->vm_end). */
if (limit - len < addr)
return -ENOMEM;
if (!vma || addr + len <= vma->vm_start)
return addr;
addr = vma->vm_end;
vma = vma->vm_next;
}
struct vm_unmapped_area_info info;
info.flags = 0;
info.length = len;
info.low_limit = addr;
info.high_limit = limit;
info.align_mask = 0;
info.align_offset = 0;
return vm_unmapped_area(&info);
}
unsigned long
......
arch/arm/boot/dts/armada-370-xp.dtsi
View file @ 7c2db36e
......@@ -131,6 +131,12 @@ i2c1: i2c@d0011100 {
clocks = <&coreclk 0>;
status = "disabled";
};
rtc@10300 {
compatible = "marvell,orion-rtc";
reg = <0xd0010300 0x20>;
interrupts = <50>;
};
};
};
arch/arm/configs/pxa910_defconfig
View file @ 7c2db36e
......@@ -42,6 +42,14 @@ CONFIG_SMC91X=y
# CONFIG_SERIO is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SPI=y
CONFIG_FB=y
CONFIG_MMP_DISP=y
CONFIG_MMP_DISP_CONTROLLER=y
CONFIG_MMP_SPI=y
CONFIG_MMP_PANEL_TPOHVGA=y
CONFIG_MMP_FB=y
CONFIG_LOGO=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
......
arch/arm/mach-mmp/include/mach/pxa910.h
View file @ 7c2db36e
......@@ -8,6 +8,7 @@ extern void __init pxa910_init_irq(void);
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include <video/mmp_disp.h>
extern struct pxa_device_desc pxa910_device_uart1;
extern struct pxa_device_desc pxa910_device_uart2;
......@@ -21,7 +22,9 @@ extern struct pxa_device_desc pxa910_device_nand;
extern struct platform_device pxa168_device_u2o;
extern struct platform_device pxa168_device_u2ootg;
extern struct platform_device pxa168_device_u2oehci;
extern struct pxa_device_desc pxa910_device_disp;
extern struct pxa_device_desc pxa910_device_fb;
extern struct pxa_device_desc pxa910_device_panel;
extern struct platform_device pxa910_device_gpio;
extern struct platform_device pxa910_device_rtc;
......
arch/arm/mach-mmp/pxa910.c
View file @ 7c2db36e
......@@ -134,6 +134,9 @@ PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec);
PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0);
PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0);
struct resource pxa910_resource_gpio[] = {
{
......
arch/arm/mach-mmp/ttc_dkb.c
View file @ 7c2db36e
......@@ -19,6 +19,8 @@
#include <linux/gpio.h>
#include <linux/mfd/88pm860x.h>
#include <linux/platform_data/mv_usb.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -184,6 +186,92 @@ static struct pxa3xx_nand_platform_data dkb_nand_info = {
};
#endif
#ifdef CONFIG_MMP_DISP
/* path config */
#define CFG_IOPADMODE(iopad) (iopad) /* 0x0 ~ 0xd */
#define SCLK_SOURCE_SELECT(x) (x << 30) /* 0x0 ~ 0x3 */
/* link config */
#define CFG_DUMBMODE(mode) (mode << 28) /* 0x0 ~ 0x6*/
#define CFG_GRA_SWAPRB(x) (x << 0) /* 1: rbswap enabled */
static struct mmp_mach_path_config dkb_disp_config[] = {
[0] = {
.name = "mmp-parallel",
.overlay_num = 2,
.output_type = PATH_OUT_PARALLEL,
.path_config = CFG_IOPADMODE(0x1)
| SCLK_SOURCE_SELECT(0x1),
.link_config = CFG_DUMBMODE(0x2)
| CFG_GRA_SWAPRB(0x1),
},
};
static struct mmp_mach_plat_info dkb_disp_info = {
.name = "mmp-disp",
.clk_name = "disp0",
.path_num = 1,
.paths = dkb_disp_config,
};
static struct mmp_buffer_driver_mach_info dkb_fb_info = {
.name = "mmp-fb",
.path_name = "mmp-parallel",
.overlay_id = 0,
.dmafetch_id = 1,
.default_pixfmt = PIXFMT_RGB565,
};
static void dkb_tpo_panel_power(int on)
{
int err;
u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106);
if (on) {
err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
if (err) {
pr_err("failed to request GPIO for TPO LCD RESET\n");
return;
}
gpio_direction_output(spi_reset, 0);
udelay(100);
gpio_set_value(spi_reset, 1);
gpio_free(spi_reset);
} else {
err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
if (err) {
pr_err("failed to request LCD RESET gpio\n");
return;
}
gpio_set_value(spi_reset, 0);
gpio_free(spi_reset);
}
}
static struct mmp_mach_panel_info dkb_tpo_panel_info = {
.name = "tpo-hvga",
.plat_path_name = "mmp-parallel",
.plat_set_onoff = dkb_tpo_panel_power,
};
static struct spi_board_info spi_board_info[] __initdata = {
{
.modalias = "tpo-hvga",
.platform_data = &dkb_tpo_panel_info,
.bus_num = 5,
}
};
static void __init add_disp(void)
{
pxa_register_device(&pxa910_device_disp,
&dkb_disp_info, sizeof(dkb_disp_info));
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
pxa_register_device(&pxa910_device_fb,
&dkb_fb_info, sizeof(dkb_fb_info));
pxa_register_device(&pxa910_device_panel,
&dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info));
}
#endif
static void __init ttc_dkb_init(void)
{
mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
......@@ -212,6 +300,10 @@ static void __init ttc_dkb_init(void)
pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
platform_device_register(&pxa168_device_u2ootg);
#endif
#ifdef CONFIG_MMP_DISP
add_disp();
#endif
}
MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
......
arch/cris/include/uapi/asm/posix_types.h
View file @ 7c2db36e
......@@ -22,11 +22,6 @@ typedef unsigned short __kernel_uid_t;
typedef unsigned short __kernel_gid_t;
#define __kernel_uid_t __kernel_uid_t
typedef __SIZE_TYPE__ __kernel_size_t;
typedef long __kernel_ssize_t;
typedef int __kernel_ptrdiff_t;
#define __kernel_size_t __kernel_size_t
typedef unsigned short __kernel_old_dev_t;
#define __kernel_old_dev_t __kernel_old_dev_t
......
arch/mn10300/unit-asb2305/pci-irq.c
View file @ 7c2db36e
......@@ -29,7 +29,7 @@ void __init pcibios_fixup_irqs(void)
struct pci_dev *dev = NULL;
u8 line, pin;
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
for_each_pci_dev(dev) {
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (pin) {
dev->irq = XIRQ1;
......
arch/tile/Kconfig
View file @ 7c2db36e
......@@ -413,12 +413,6 @@ config TILE_USB
Provides USB host adapter support for the built-in EHCI and OHCI
interfaces on TILE-Gx chips.
# USB OHCI needs the bounce pool since tilegx will often have more
# than 4GB of memory, but we don't currently use the IOTLB to present
# a 32-bit address to OHCI. So we need to use a bounce pool instead.
config NEED_BOUNCE_POOL
def_bool USB_OHCI_HCD
source "drivers/pci/hotplug/Kconfig"
endmenu
......
block/blk-core.c
View file @ 7c2db36e
......@@ -1474,6 +1474,11 @@ void blk_queue_bio(struct request_queue *q, struct bio *bio)
*/
blk_queue_bounce(q, &bio);
if (bio_integrity_enabled(bio) && bio_integrity_prep(bio)) {
bio_endio(bio, -EIO);
return;
}
if (bio->bi_rw & (REQ_FLUSH | REQ_FUA)) {
spin_lock_irq(q->queue_lock);
where = ELEVATOR_INSERT_FLUSH;
......@@ -1714,9 +1719,6 @@ generic_make_request_checks(struct bio *bio)
*/
blk_partition_remap(bio);
if (bio_integrity_enabled(bio) && bio_integrity_prep(bio))
goto end_io;
if (bio_check_eod(bio, nr_sectors))
goto end_io;
......
block/blk-integrity.c
View file @ 7c2db36e
......@@ -420,6 +420,8 @@ int blk_integrity_register(struct gendisk *disk, struct blk_integrity *template)
} else
bi->name = bi_unsupported_name;
disk->queue->backing_dev_info.capabilities |= BDI_CAP_STABLE_WRITES;
return 0;
}
EXPORT_SYMBOL(blk_integrity_register);
......@@ -438,6 +440,8 @@ void blk_integrity_unregister(struct gendisk *disk)
if (!disk || !disk->integrity)
return;
disk->queue->backing_dev_info.capabilities &= ~BDI_CAP_STABLE_WRITES;
bi = disk->integrity;
kobject_uevent(&bi->kobj, KOBJ_REMOVE);
......
drivers/net/ethernet/sun/Kconfig
View file @ 7c2db36e
......@@ -61,7 +61,7 @@ config SUNGEM
select SUNGEM_PHY
---help---
Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
<http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
<http://docs.oracle.com/cd/E19455-01/806-3985-10/806-3985-10.pdf>.
config CASSINI
tristate "Sun Cassini support"
......@@ -69,7 +69,7 @@ config CASSINI
select CRC32
---help---
Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
<http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
<http://docs.oracle.com/cd/E19113-01/giga.ether.pci/817-4341-10/817-4341-10.pdf>.
config SUNVNET
tristate "Sun Virtual Network support"
......
drivers/pcmcia/cs.c
View file @ 7c2db36e
......@@ -484,7 +484,7 @@ static int socket_early_resume(struct pcmcia_socket *skt)
static int socket_late_resume(struct pcmcia_socket *skt)
{
int ret;
int ret = 0;
mutex_lock(&skt->ops_mutex);
skt->state &= ~SOCKET_SUSPEND;
......@@ -511,19 +511,31 @@ static int socket_late_resume(struct pcmcia_socket *skt)
return socket_insert(skt);
}
if (!(skt->state & SOCKET_CARDBUS) && (skt->callback))
ret = skt->callback->early_resume(skt);
return ret;
}
/*
* Finalize the resume. In case of a cardbus socket, we have
* to rebind the devices as we can't be certain that it has been
* replaced, or not.
*/
static int socket_complete_resume(struct pcmcia_socket *skt)
{
int ret = 0;
#ifdef CONFIG_CARDBUS
if (skt->state & SOCKET_CARDBUS) {
/* We can't be sure the CardBus card is the same
* as the one previously inserted. Therefore, remove
* and re-add... */
cb_free(skt);
cb_alloc(skt);
return 0;
ret = cb_alloc(skt);
if (ret)
cb_free(skt);
}
#endif
if (!(skt->state & SOCKET_CARDBUS) && (skt->callback))
skt->callback->early_resume(skt);
return 0;
return ret;
}
/*
......@@ -533,11 +545,15 @@ static int socket_late_resume(struct pcmcia_socket *skt)
*/
static int socket_resume(struct pcmcia_socket *skt)
{
int err;
if (!(skt->state & SOCKET_SUSPEND))
return -EBUSY;
socket_early_resume(skt);
return socket_late_resume(skt);
err = socket_late_resume(skt);
if (!err)
err = socket_complete_resume(skt);
return err;
}
static void socket_remove(struct pcmcia_socket *skt)
......@@ -848,6 +864,12 @@ static int __used pcmcia_socket_dev_resume(struct device *dev)
return __pcmcia_pm_op(dev, socket_late_resume);
}
static void __used pcmcia_socket_dev_complete(struct device *dev)
{
WARN(__pcmcia_pm_op(dev, socket_complete_resume),
"failed to complete resume");
}
static const struct dev_pm_ops pcmcia_socket_pm_ops = {
/* dev_resume may be called with IRQs enabled */
SET_SYSTEM_SLEEP_PM_OPS(NULL,
......@@ -862,6 +884,7 @@ static const struct dev_pm_ops pcmcia_socket_pm_ops = {
.resume_noirq = pcmcia_socket_dev_resume_noirq,
.thaw_noirq = pcmcia_socket_dev_resume_noirq,
.restore_noirq = pcmcia_socket_dev_resume_noirq,
.complete = pcmcia_socket_dev_complete,
};
#define PCMCIA_SOCKET_CLASS_PM_OPS (&pcmcia_socket_pm_ops)
......
drivers/rtc/Kconfig
View file @ 7c2db36e
......@@ -204,6 +204,12 @@ config RTC_DRV_DS3232
This driver can also be built as a module. If so, the module
will be called rtc-ds3232.
config RTC_DRV_LP8788
tristate "TI LP8788 RTC driver"
depends on MFD_LP8788
help
Say Y to enable support for the LP8788 RTC/ALARM driver.
config RTC_DRV_MAX6900
tristate "Maxim MAX6900"
help
......@@ -243,6 +249,26 @@ config RTC_DRV_MAX8998
This driver can also be built as a module. If so, the module
will be called rtc-max8998.
config RTC_DRV_MAX8997
tristate "Maxim MAX8997"
depends on MFD_MAX8997
help
If you say yes here you will get support for the
RTC of Maxim MAX8997 PMIC.
This driver can also be built as a module. If so, the module
will be called rtc-max8997.
config RTC_DRV_MAX77686
tristate "Maxim MAX77686"
depends on MFD_MAX77686
help
If you say yes here you will get support for the
RTC of Maxim MAX77686 PMIC.
This driver can also be built as a module. If so, the module
will be called rtc-max77686.
config RTC_DRV_RS5C372
tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A"
help
......@@ -380,6 +406,14 @@ config RTC_DRV_TPS65910
This driver can also be built as a module. If so, the module
will be called rtc-tps65910.
config RTC_DRV_TPS80031
tristate "TI TPS80031/TPS80032 RTC driver"
depends on MFD_TPS80031
help
TI Power Managment IC TPS80031 supports RTC functionality
along with alarm. This driver supports the RTC driver for
the TPS80031 RTC module.
config RTC_DRV_RC5T583
tristate "RICOH 5T583 RTC driver"
depends on MFD_RC5T583
......@@ -537,6 +571,14 @@ config RTC_DRV_PCF2123
This driver can also be built as a module. If so, the module
will be called rtc-pcf2123.
config RTC_DRV_RX4581
tristate "Epson RX-4581"
help
If you say yes here you will get support for the Epson RX-4581.
This driver can also be built as a module. If so the module
will be called rtc-rx4581.
endif # SPI_MASTER
comment "Platform RTC drivers"
......
drivers/rtc/Makefile
View file @ 7c2db36e
......@@ -58,6 +58,7 @@ obj-$(CONFIG_RTC_DRV_IMXDI) += rtc-imxdi.o
obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
obj-$(CONFIG_RTC_DRV_ISL12022) += rtc-isl12022.o
obj-$(CONFIG_RTC_DRV_JZ4740) += rtc-jz4740.o
obj-$(CONFIG_RTC_DRV_LP8788) += rtc-lp8788.o
obj-$(CONFIG_RTC_DRV_LPC32XX) += rtc-lpc32xx.o
obj-$(CONFIG_RTC_DRV_LOONGSON1) += rtc-ls1x.o
obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o
......@@ -71,7 +72,9 @@ obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
obj-$(CONFIG_RTC_DRV_MAX8907) += rtc-max8907.o
obj-$(CONFIG_RTC_DRV_MAX8925) += rtc-max8925.o
obj-$(CONFIG_RTC_DRV_MAX8998) += rtc-max8998.o
obj-$(CONFIG_RTC_DRV_MAX8997) += rtc-max8997.o
obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
obj-$(CONFIG_RTC_DRV_MAX77686) += rtc-max77686.o
obj-$(CONFIG_RTC_DRV_MC13XXX) += rtc-mc13xxx.o
obj-$(CONFIG_RTC_DRV_MSM6242) += rtc-msm6242.o
obj-$(CONFIG_RTC_DRV_MPC5121) += rtc-mpc5121.o
......@@ -97,6 +100,7 @@ obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o
obj-$(CONFIG_RTC_DRV_RV3029C2) += rtc-rv3029c2.o
obj-$(CONFIG_RTC_DRV_RX4581) += rtc-rx4581.o
obj-$(CONFIG_RTC_DRV_RX8025) += rtc-rx8025.o
obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o
obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o
......@@ -115,6 +119,7 @@ obj-$(CONFIG_RTC_DRV_TILE) += rtc-tile.o
obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl.o
obj-$(CONFIG_RTC_DRV_TPS6586X) += rtc-tps6586x.o
obj-$(CONFIG_RTC_DRV_TPS65910) += rtc-tps65910.o
obj-$(CONFIG_RTC_DRV_TPS80031) += rtc-tps80031.o
obj-$(CONFIG_RTC_DRV_TX4939) += rtc-tx4939.o
obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o
obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o
......
drivers/rtc/class.c
View file @ 7c2db36e
......@@ -11,6 +11,8 @@
* published by the Free Software Foundation.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/kdev_t.h>
......@@ -261,7 +263,7 @@ static int __init rtc_init(void)
{
rtc_class = class_create(THIS_MODULE, "rtc");
if (IS_ERR(rtc_class)) {
printk(KERN_ERR "%s: couldn't create class\n", __FILE__);
pr_err("couldn't create class\n");
return PTR_ERR(rtc_class);
}
rtc_class->suspend = rtc_suspend;
......
drivers/rtc/rtc-at91rm9200.c
View file @ 7c2db36e
......@@ -86,7 +86,7 @@ static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
tm->tm_year = tm->tm_year - 1900;
pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
......@@ -100,7 +100,7 @@ static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
{
unsigned long cr;
pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
......@@ -145,7 +145,7 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
alrm->enabled = (at91_rtc_read(AT91_RTC_IMR) & AT91_RTC_ALARM)
? 1 : 0;
pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
......@@ -183,7 +183,7 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM);
}
pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
at91_alarm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour,
tm.tm_min, tm.tm_sec);
......@@ -192,7 +192,7 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
pr_debug("%s(): cmd=%08x\n", __func__, enabled);
dev_dbg(dev, "%s(): cmd=%08x\n", __func__, enabled);
if (enabled) {
at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
......@@ -240,7 +240,7 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id)
rtc_update_irq(rtc, 1, events);
pr_debug("%s(): num=%ld, events=0x%02lx\n", __func__,
dev_dbg(&pdev->dev, "%s(): num=%ld, events=0x%02lx\n", __func__,
events >> 8, events & 0x000000FF);
return IRQ_HANDLED;
......@@ -296,8 +296,7 @@ static int __init at91_rtc_probe(struct platform_device *pdev)
IRQF_SHARED,
"at91_rtc", pdev);
if (ret) {
printk(KERN_ERR "at91_rtc: IRQ %d already in use.\n",
irq);
dev_err(&pdev->dev, "IRQ %d already in use.\n", irq);
return ret;
}
......@@ -315,7 +314,7 @@ static int __init at91_rtc_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, rtc);
printk(KERN_INFO "AT91 Real Time Clock driver.\n");
dev_info(&pdev->dev, "AT91 Real Time Clock driver.\n");
return 0;
}
......
drivers/rtc/rtc-cmos.c
View file @ 7c2db36e
......@@ -706,7 +706,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
rtc_cmos_int_handler = hpet_rtc_interrupt;
err = hpet_register_irq_handler(cmos_interrupt);
if (err != 0) {
printk(KERN_WARNING "hpet_register_irq_handler "
dev_warn(dev, "hpet_register_irq_handler "
" failed in rtc_init().");
goto cleanup1;
}
......@@ -731,8 +731,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
goto cleanup2;
}
pr_info("%s: %s%s, %zd bytes nvram%s\n",
dev_name(&cmos_rtc.rtc->dev),
dev_info(dev, "%s%s, %zd bytes nvram%s\n",
!is_valid_irq(rtc_irq) ? "no alarms" :
cmos_rtc.mon_alrm ? "alarms up to one year" :
cmos_rtc.day_alrm ? "alarms up to one month" :
......@@ -820,8 +819,7 @@ static int cmos_suspend(struct device *dev)
enable_irq_wake(cmos->irq);
}
pr_debug("%s: suspend%s, ctrl %02x\n",
dev_name(&cmos_rtc.rtc->dev),
dev_dbg(dev, "suspend%s, ctrl %02x\n",
(tmp & RTC_AIE) ? ", alarm may wake" : "",
tmp);
......@@ -876,9 +874,7 @@ static int cmos_resume(struct device *dev)
spin_unlock_irq(&rtc_lock);
}
pr_debug("%s: resume, ctrl %02x\n",
dev_name(&cmos_rtc.rtc->dev),
tmp);
dev_dbg(dev, "resume, ctrl %02x\n", tmp);
return 0;
}
......@@ -1098,7 +1094,6 @@ static __init void cmos_of_init(struct platform_device *pdev)
}
#else
static inline void cmos_of_init(struct platform_device *pdev) {}
#define of_cmos_match NULL
#endif
/*----------------------------------------------------------------*/
......@@ -1140,7 +1135,7 @@ static struct platform_driver cmos_platform_driver = {
#ifdef CONFIG_PM
.pm = &cmos_pm_ops,
#endif
.of_match_table = of_cmos_match,
.of_match_table = of_match_ptr(of_cmos_match),
}
};
......
drivers/rtc/rtc-coh901331.c
View file @ 7c2db36e
......@@ -157,7 +157,6 @@ static int __exit coh901331_remove(struct platform_device *pdev)
if (rtap) {
rtc_device_unregister(rtap->rtc);
clk_unprepare(rtap->clk);
clk_put(rtap->clk);
platform_set_drvdata(pdev, NULL);
}
......@@ -196,7 +195,7 @@ static int __init coh901331_probe(struct platform_device *pdev)
"RTC COH 901 331 Alarm", rtap))
return -EIO;
rtap->clk = clk_get(&pdev->dev, NULL);
rtap->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(rtap->clk)) {
ret = PTR_ERR(rtap->clk);
dev_err(&pdev->dev, "could not get clock\n");
......@@ -207,7 +206,7 @@ static int __init coh901331_probe(struct platform_device *pdev)
ret = clk_prepare_enable(rtap->clk);
if (ret) {
dev_err(&pdev->dev, "could not enable clock\n");
goto out_no_clk_prepenable;
return ret;
}
clk_disable(rtap->clk);
......@@ -224,8 +223,6 @@ static int __init coh901331_probe(struct platform_device *pdev)
out_no_rtc:
platform_set_drvdata(pdev, NULL);
clk_unprepare(rtap->clk);
out_no_clk_prepenable:
clk_put(rtap->clk);
return ret;
}
......
drivers/rtc/rtc-da9052.c
View file @ 7c2db36e
......@@ -240,7 +240,8 @@ static int da9052_rtc_probe(struct platform_device *pdev)
rtc->da9052 = dev_get_drvdata(pdev->dev.parent);
platform_set_drvdata(pdev, rtc);
rtc->irq = platform_get_irq_byname(pdev, "ALM");
ret = request_threaded_irq(rtc->irq, NULL, da9052_rtc_irq,
ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
da9052_rtc_irq,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"ALM", rtc);
if (ret != 0) {
......@@ -250,16 +251,10 @@ static int da9052_rtc_probe(struct platform_device *pdev)
rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
&da9052_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rtc)) {
ret = PTR_ERR(rtc->rtc);
goto err_free_irq;
}
if (IS_ERR(rtc->rtc))
return PTR_ERR(rtc->rtc);
return 0;
err_free_irq:
free_irq(rtc->irq, rtc);
return ret;
}
static int da9052_rtc_remove(struct platform_device *pdev)
......@@ -267,7 +262,6 @@ static int da9052_rtc_remove(struct platform_device *pdev)
struct da9052_rtc *rtc = pdev->dev.platform_data;
rtc_device_unregister(rtc->rtc);
free_irq(rtc->irq, rtc);
platform_set_drvdata(pdev, NULL);
return 0;
......
drivers/rtc/rtc-davinci.c
View file @ 7c2db36e
......@@ -506,19 +506,19 @@ static int __init davinci_rtc_probe(struct platform_device *pdev)
davinci_rtc->pbase = res->start;
davinci_rtc->base_size = resource_size(res);
mem = request_mem_region(davinci_rtc->pbase, davinci_rtc->base_size,
pdev->name);
mem = devm_request_mem_region(dev, davinci_rtc->pbase,
davinci_rtc->base_size, pdev->name);
if (!mem) {
dev_err(dev, "RTC registers at %08x are not free\n",
davinci_rtc->pbase);
return -EBUSY;
}
davinci_rtc->base = ioremap(davinci_rtc->pbase, davinci_rtc->base_size);
davinci_rtc->base = devm_ioremap(dev, davinci_rtc->pbase,
davinci_rtc->base_size);
if (!davinci_rtc->base) {
dev_err(dev, "unable to ioremap MEM resource\n");
ret = -ENOMEM;
goto fail2;
return -ENOMEM;
}
platform_set_drvdata(pdev, davinci_rtc);
......@@ -529,7 +529,7 @@ static int __init davinci_rtc_probe(struct platform_device *pdev)
ret = PTR_ERR(davinci_rtc->rtc);
dev_err(dev, "unable to register RTC device, err %d\n",
ret);
goto fail3;
goto fail1;
}
rtcif_write(davinci_rtc, PRTCIF_INTFLG_RTCSS, PRTCIF_INTFLG);
......@@ -539,11 +539,11 @@ static int __init davinci_rtc_probe(struct platform_device *pdev)
rtcss_write(davinci_rtc, 0, PRTCSS_RTC_CTRL);
rtcss_write(davinci_rtc, 0, PRTCSS_RTC_CCTRL);
ret = request_irq(davinci_rtc->irq, davinci_rtc_interrupt,
ret = devm_request_irq(dev, davinci_rtc->irq, davinci_rtc_interrupt,
0, "davinci_rtc", davinci_rtc);
if (ret < 0) {
dev_err(dev, "unable to register davinci RTC interrupt\n");
goto fail4;
goto fail2;
}
/* Enable interrupts */
......@@ -557,13 +557,10 @@ static int __init davinci_rtc_probe(struct platform_device *pdev)
return 0;
fail4:
fail2:
rtc_device_unregister(davinci_rtc->rtc);
fail3:
fail1:
platform_set_drvdata(pdev, NULL);
iounmap(davinci_rtc->base);
fail2:
release_mem_region(davinci_rtc->pbase, davinci_rtc->base_size);
return ret;
}
......@@ -575,13 +572,8 @@ static int davinci_rtc_remove(struct platform_device *pdev)
rtcif_write(davinci_rtc, 0, PRTCIF_INTEN);
free_irq(davinci_rtc->irq, davinci_rtc);
rtc_device_unregister(davinci_rtc->rtc);
iounmap(davinci_rtc->base);
release_mem_region(davinci_rtc->pbase, davinci_rtc->base_size);
platform_set_drvdata(pdev, NULL);
return 0;
......
drivers/rtc/rtc-dev.c
View file @ 7c2db36e
......@@ -11,6 +11,8 @@
* published by the Free Software Foundation.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/sched.h>
......@@ -462,7 +464,7 @@ void rtc_dev_prepare(struct rtc_device *rtc)
return;
if (rtc->id >= RTC_DEV_MAX) {
pr_debug("%s: too many RTC devices\n", rtc->name);
dev_dbg(&rtc->dev, "%s: too many RTC devices\n", rtc->name);
return;
}
......@@ -480,10 +482,10 @@ void rtc_dev_prepare(struct rtc_device *rtc)
void rtc_dev_add_device(struct rtc_device *rtc)
{
if (cdev_add(&rtc->char_dev, rtc->dev.devt, 1))
printk(KERN_WARNING "%s: failed to add char device %d:%d\n",
dev_warn(&rtc->dev, "%s: failed to add char device %d:%d\n",
rtc->name, MAJOR(rtc_devt), rtc->id);
else
pr_debug("%s: dev (%d:%d)\n", rtc->name,
dev_dbg(&rtc->dev, "%s: dev (%d:%d)\n", rtc->name,
MAJOR(rtc_devt), rtc->id);
}
......@@ -499,8 +501,7 @@ void __init rtc_dev_init(void)
err = alloc_chrdev_region(&rtc_devt, 0, RTC_DEV_MAX, "rtc");
if (err < 0)
printk(KERN_ERR "%s: failed to allocate char dev region\n",
__FILE__);
pr_err("failed to allocate char dev region\n");
}
void __exit rtc_dev_exit(void)
......
drivers/rtc/rtc-ds1305.c
View file @ 7c2db36e
......@@ -635,9 +635,7 @@ static int ds1305_probe(struct spi_device *spi)
goto fail0;
}
dev_dbg(&spi->dev, "ctrl %s: %02x %02x %02x\n",
"read", ds1305->ctrl[0],
ds1305->ctrl[1], ds1305->ctrl[2]);
dev_dbg(&spi->dev, "ctrl %s: %3ph\n", "read", ds1305->ctrl);
/* Sanity check register values ... partially compensating for the
* fact that SPI has no device handshake. A pullup on MISO would
......@@ -723,9 +721,7 @@ static int ds1305_probe(struct spi_device *spi)
goto fail0;
}
dev_dbg(&spi->dev, "ctrl %s: %02x %02x %02x\n",
"write", ds1305->ctrl[0],
ds1305->ctrl[1], ds1305->ctrl[2]);
dev_dbg(&spi->dev, "ctrl %s: %3ph\n", "write", ds1305->ctrl);
}
/* see if non-Linux software set up AM/PM mode */
......
drivers/rtc/rtc-ds1307.c
View file @ 7c2db36e
......@@ -322,12 +322,7 @@ static int ds1307_get_time(struct device *dev, struct rtc_time *t)
return -EIO;
}
dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n",
"read",
ds1307->regs[0], ds1307->regs[1],
ds1307->regs[2], ds1307->regs[3],
ds1307->regs[4], ds1307->regs[5],
ds1307->regs[6]);
dev_dbg(dev, "%s: %7ph\n", "read", ds1307->regs);
t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f);
t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f);
......@@ -398,9 +393,7 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
break;
}
dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n",
"write", buf[0], buf[1], buf[2], buf[3],
buf[4], buf[5], buf[6]);
dev_dbg(dev, "%s: %7ph\n", "write", buf);
result = ds1307->write_block_data(ds1307->client,
ds1307->offset, 7, buf);
......
drivers/rtc/rtc-ds2404.c
View file @ 7c2db36e
......@@ -70,7 +70,7 @@ static int ds2404_gpio_map(struct ds2404 *chip, struct platform_device *pdev,
for (i = 0; i < ARRAY_SIZE(ds2404_gpio); i++) {
err = gpio_request(ds2404_gpio[i].gpio, ds2404_gpio[i].name);
if (err) {
printk(KERN_ERR "error mapping gpio %s: %d\n",
dev_err(&pdev->dev, "error mapping gpio %s: %d\n",
ds2404_gpio[i].name, err);
goto err_request;
}
......@@ -177,7 +177,7 @@ static void ds2404_write_memory(struct device *dev, u16 offset,
for (i = 0; i < length; i++) {
if (out[i] != ds2404_read_byte(dev)) {
printk(KERN_ERR "read invalid data\n");
dev_err(dev, "read invalid data\n");
return;
}
}
......@@ -283,19 +283,7 @@ static struct platform_driver rtc_device_driver = {
.owner = THIS_MODULE,
},
};
static __init int ds2404_init(void)
{
return platform_driver_register(&rtc_device_driver);
}
static __exit void ds2404_exit(void)
{
platform_driver_unregister(&rtc_device_driver);
}
module_init(ds2404_init);
module_exit(ds2404_exit);
module_platform_driver(rtc_device_driver);
MODULE_DESCRIPTION("DS2404 RTC");
MODULE_AUTHOR("Sven Schnelle");
......
drivers/rtc/rtc-efi.c
View file @ 7c2db36e
......@@ -13,6 +13,8 @@
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/time.h>
......@@ -47,7 +49,7 @@ compute_wday(efi_time_t *eft)
int ndays = 0;
if (eft->year < 1998) {
printk(KERN_ERR "efirtc: EFI year < 1998, invalid date\n");
pr_err("EFI year < 1998, invalid date\n");
return -1;
}
......@@ -142,7 +144,7 @@ static int efi_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
*/
status = efi.set_wakeup_time((efi_bool_t)wkalrm->enabled, &eft);
printk(KERN_WARNING "write status is %d\n", (int)status);
dev_warn(dev, "write status is %d\n", (int)status);
return status == EFI_SUCCESS ? 0 : -EINVAL;
}
......@@ -157,7 +159,7 @@ static int efi_read_time(struct device *dev, struct rtc_time *tm)
if (status != EFI_SUCCESS) {
/* should never happen */
printk(KERN_ERR "efitime: can't read time\n");
dev_err(dev, "can't read time\n");
return -EINVAL;
}
......
drivers/rtc/rtc-fm3130.c
View file @ 7c2db36e
......@@ -116,17 +116,7 @@ static int fm3130_get_time(struct device *dev, struct rtc_time *t)
fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x"
"%02x %02x %02x %02x %02x %02x %02x\n",
"read",
fm3130->regs[0], fm3130->regs[1],
fm3130->regs[2], fm3130->regs[3],
fm3130->regs[4], fm3130->regs[5],
fm3130->regs[6], fm3130->regs[7],
fm3130->regs[8], fm3130->regs[9],
fm3130->regs[0xa], fm3130->regs[0xb],
fm3130->regs[0xc], fm3130->regs[0xd],
fm3130->regs[0xe]);
dev_dbg(dev, "%s: %15ph\n", "read", fm3130->regs);
t->tm_sec = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
t->tm_min = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
......@@ -175,12 +165,7 @@ static int fm3130_set_time(struct device *dev, struct rtc_time *t)
tmp = t->tm_year - 100;
buf[FM3130_RTC_YEARS] = bin2bcd(tmp);
dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x"
"%02x %02x %02x %02x %02x %02x %02x %02x\n",
"write", buf[0], buf[1], buf[2], buf[3],
buf[4], buf[5], buf[6], buf[7],
buf[8], buf[9], buf[0xa], buf[0xb],
buf[0xc], buf[0xd], buf[0xe]);
dev_dbg(dev, "%s: %15ph\n", "write", buf);
fm3130_rtc_mode(dev, FM3130_MODE_WRITE);
......@@ -517,18 +502,8 @@ static int fm3130_probe(struct i2c_client *client,
bad_clock:
if (!fm3130->data_valid || !fm3130->alarm_valid)
dev_dbg(&client->dev,
"%s: %02x %02x %02x %02x %02x %02x %02x %02x"
"%02x %02x %02x %02x %02x %02x %02x\n",
"bogus registers",
fm3130->regs[0], fm3130->regs[1],
fm3130->regs[2], fm3130->regs[3],
fm3130->regs[4], fm3130->regs[5],
fm3130->regs[6], fm3130->regs[7],
fm3130->regs[8], fm3130->regs[9],
fm3130->regs[0xa], fm3130->regs[0xb],
fm3130->regs[0xc], fm3130->regs[0xd],
fm3130->regs[0xe]);
dev_dbg(&client->dev, "%s: %15ph\n", "bogus registers",
fm3130->regs);
/* We won't bail out here because we just got invalid data.
Time setting from u-boot doesn't work anyway */
......
drivers/rtc/rtc-imxdi.c
View file @ 7c2db36e
......@@ -406,7 +406,7 @@ static int dryice_rtc_probe(struct platform_device *pdev)
mutex_init(&imxdi->write_mutex);
imxdi->clk = clk_get(&pdev->dev, NULL);
imxdi->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(imxdi->clk))
return PTR_ERR(imxdi->clk);
clk_prepare_enable(imxdi->clk);
......@@ -475,7 +475,6 @@ static int dryice_rtc_probe(struct platform_device *pdev)
err:
clk_disable_unprepare(imxdi->clk);
clk_put(imxdi->clk);
return rc;
}
......@@ -492,7 +491,6 @@ static int dryice_rtc_remove(struct platform_device *pdev)
rtc_device_unregister(imxdi->rtc);
clk_disable_unprepare(imxdi->clk);
clk_put(imxdi->clk);
return 0;
}
......
drivers/rtc/rtc-isl12022.c
View file @ 7c2db36e
......@@ -227,7 +227,7 @@ static int isl12022_set_datetime(struct i2c_client *client, struct rtc_time *tm)
buf[ISL12022_REG_SC + i]);
if (ret)
return -EIO;
};
}
return 0;
}
......
drivers/rtc/rtc-lp8788.c 0 → 100644
View file @ 7c2db36e
/*
* TI LP8788 MFD - rtc driver
*
* Copyright 2012 Texas Instruments
*
* Author: Milo(Woogyom) Kim <milo.kim@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/err.h>
#include <linux/irqdomain.h>
#include <linux/mfd/lp8788.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
#include <linux/slab.h>
/* register address */
#define LP8788_INTEN_3 0x05
#define LP8788_RTC_UNLOCK 0x64
#define LP8788_RTC_SEC 0x70
#define LP8788_ALM1_SEC 0x77
#define LP8788_ALM1_EN 0x7D
#define LP8788_ALM2_SEC 0x7E
#define LP8788_ALM2_EN 0x84
/* mask/shift bits */
#define LP8788_INT_RTC_ALM1_M BIT(1) /* Addr 05h */
#define LP8788_INT_RTC_ALM1_S 1
#define LP8788_INT_RTC_ALM2_M BIT(2) /* Addr 05h */
#define LP8788_INT_RTC_ALM2_S 2
#define LP8788_ALM_EN_M BIT(7) /* Addr 7Dh or 84h */
#define LP8788_ALM_EN_S 7
#define DEFAULT_ALARM_SEL LP8788_ALARM_1
#define LP8788_MONTH_OFFSET 1
#define LP8788_BASE_YEAR 2000
#define MAX_WDAY_BITS 7
#define LP8788_WDAY_SET 1
#define RTC_UNLOCK 0x1
#define RTC_LATCH 0x2
#define ALARM_IRQ_FLAG (RTC_IRQF | RTC_AF)
enum lp8788_time {
LPTIME_SEC,
LPTIME_MIN,
LPTIME_HOUR,
LPTIME_MDAY,
LPTIME_MON,
LPTIME_YEAR,
LPTIME_WDAY,
LPTIME_MAX,
};
struct lp8788_rtc {
struct lp8788 *lp;
struct rtc_device *rdev;
enum lp8788_alarm_sel alarm;
int irq;
};
static const u8 addr_alarm_sec[LP8788_ALARM_MAX] = {
LP8788_ALM1_SEC,
LP8788_ALM2_SEC,
};
static const u8 addr_alarm_en[LP8788_ALARM_MAX] = {
LP8788_ALM1_EN,
LP8788_ALM2_EN,
};
static const u8 mask_alarm_en[LP8788_ALARM_MAX] = {
LP8788_INT_RTC_ALM1_M,
LP8788_INT_RTC_ALM2_M,
};
static const u8 shift_alarm_en[LP8788_ALARM_MAX] = {
LP8788_INT_RTC_ALM1_S,
LP8788_INT_RTC_ALM2_S,
};
static int _to_tm_wday(u8 lp8788_wday)
{
int i;
if (lp8788_wday == 0)
return 0;
/* lookup defined weekday from read register value */
for (i = 0; i < MAX_WDAY_BITS; i++) {
if ((lp8788_wday >> i) == LP8788_WDAY_SET)
break;
}
return i + 1;
}
static inline int _to_lp8788_wday(int tm_wday)
{
return LP8788_WDAY_SET << (tm_wday - 1);
}
static void lp8788_rtc_unlock(struct lp8788 *lp)
{
lp8788_write_byte(lp, LP8788_RTC_UNLOCK, RTC_UNLOCK);
lp8788_write_byte(lp, LP8788_RTC_UNLOCK, RTC_LATCH);
}
static int lp8788_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct lp8788_rtc *rtc = dev_get_drvdata(dev);
struct lp8788 *lp = rtc->lp;
u8 data[LPTIME_MAX];
int ret;
lp8788_rtc_unlock(lp);
ret = lp8788_read_multi_bytes(lp, LP8788_RTC_SEC, data, LPTIME_MAX);
if (ret)
return ret;
tm->tm_sec = data[LPTIME_SEC];
tm->tm_min = data[LPTIME_MIN];
tm->tm_hour = data[LPTIME_HOUR];
tm->tm_mday = data[LPTIME_MDAY];
tm->tm_mon = data[LPTIME_MON] - LP8788_MONTH_OFFSET;
tm->tm_year = data[LPTIME_YEAR] + LP8788_BASE_YEAR - 1900;
tm->tm_wday = _to_tm_wday(data[LPTIME_WDAY]);
return 0;
}
static int lp8788_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct lp8788_rtc *rtc = dev_get_drvdata(dev);
struct lp8788 *lp = rtc->lp;
u8 data[LPTIME_MAX - 1];
int ret, i, year;
year = tm->tm_year + 1900 - LP8788_BASE_YEAR;
if (year < 0) {
dev_err(lp->dev, "invalid year: %d\n", year);
return -EINVAL;
}
/* because rtc weekday is a readonly register, do not update */
data[LPTIME_SEC] = tm->tm_sec;
data[LPTIME_MIN] = tm->tm_min;
data[LPTIME_HOUR] = tm->tm_hour;
data[LPTIME_MDAY] = tm->tm_mday;
data[LPTIME_MON] = tm->tm_mon + LP8788_MONTH_OFFSET;
data[LPTIME_YEAR] = year;
for (i = 0; i < ARRAY_SIZE(data); i++) {
ret = lp8788_write_byte(lp, LP8788_RTC_SEC + i, data[i]);
if (ret)
return ret;
}
return 0;
}
static int lp8788_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
struct lp8788_rtc *rtc = dev_get_drvdata(dev);
struct lp8788 *lp = rtc->lp;
struct rtc_time *tm = &alarm->time;
u8 addr, data[LPTIME_MAX];
int ret;
addr = addr_alarm_sec[rtc->alarm];
ret = lp8788_read_multi_bytes(lp, addr, data, LPTIME_MAX);
if (ret)
return ret;
tm->tm_sec = data[LPTIME_SEC];
tm->tm_min = data[LPTIME_MIN];
tm->tm_hour = data[LPTIME_HOUR];
tm->tm_mday = data[LPTIME_MDAY];
tm->tm_mon = data[LPTIME_MON] - LP8788_MONTH_OFFSET;
tm->tm_year = data[LPTIME_YEAR] + LP8788_BASE_YEAR - 1900;
tm->tm_wday = _to_tm_wday(data[LPTIME_WDAY]);
alarm->enabled = data[LPTIME_WDAY] & LP8788_ALM_EN_M;
return 0;
}
static int lp8788_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
struct lp8788_rtc *rtc = dev_get_drvdata(dev);
struct lp8788 *lp = rtc->lp;
struct rtc_time *tm = &alarm->time;
u8 addr, data[LPTIME_MAX];
int ret, i, year;
year = tm->tm_year + 1900 - LP8788_BASE_YEAR;
if (year < 0) {
dev_err(lp->dev, "invalid year: %d\n", year);
return -EINVAL;
}
data[LPTIME_SEC] = tm->tm_sec;
data[LPTIME_MIN] = tm->tm_min;
data[LPTIME_HOUR] = tm->tm_hour;
data[LPTIME_MDAY] = tm->tm_mday;
data[LPTIME_MON] = tm->tm_mon + LP8788_MONTH_OFFSET;
data[LPTIME_YEAR] = year;
data[LPTIME_WDAY] = _to_lp8788_wday(tm->tm_wday);
for (i = 0; i < ARRAY_SIZE(data); i++) {
addr = addr_alarm_sec[rtc->alarm] + i;
ret = lp8788_write_byte(lp, addr, data[i]);
if (ret)
return ret;
}
alarm->enabled = 1;
addr = addr_alarm_en[rtc->alarm];
return lp8788_update_bits(lp, addr, LP8788_ALM_EN_M,
alarm->enabled << LP8788_ALM_EN_S);
}
static int lp8788_alarm_irq_enable(struct device *dev, unsigned int enable)
{
struct lp8788_rtc *rtc = dev_get_drvdata(dev);
struct lp8788 *lp = rtc->lp;
u8 mask, shift;
if (!rtc->irq)
return -EIO;
mask = mask_alarm_en[rtc->alarm];
shift = shift_alarm_en[rtc->alarm];
return lp8788_update_bits(lp, LP8788_INTEN_3, mask, enable << shift);
}
static const struct rtc_class_ops lp8788_rtc_ops = {
.read_time = lp8788_rtc_read_time,
.set_time = lp8788_rtc_set_time,
.read_alarm = lp8788_read_alarm,
.set_alarm = lp8788_set_alarm,
.alarm_irq_enable = lp8788_alarm_irq_enable,
};
static irqreturn_t lp8788_alarm_irq_handler(int irq, void *ptr)
{
struct lp8788_rtc *rtc = ptr;
rtc_update_irq(rtc->rdev, 1, ALARM_IRQ_FLAG);
return IRQ_HANDLED;
}
static int lp8788_alarm_irq_register(struct platform_device *pdev,
struct lp8788_rtc *rtc)
{
struct resource *r;
struct lp8788 *lp = rtc->lp;
struct irq_domain *irqdm = lp->irqdm;
int irq;
rtc->irq = 0;
/* even the alarm IRQ number is not specified, rtc time should work */
r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, LP8788_ALM_IRQ);
if (!r)
return 0;
if (rtc->alarm == LP8788_ALARM_1)
irq = r->start;
else
irq = r->end;
rtc->irq = irq_create_mapping(irqdm, irq);
return devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
lp8788_alarm_irq_handler,
0, LP8788_ALM_IRQ, rtc);
}
static int lp8788_rtc_probe(struct platform_device *pdev)
{
struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
struct lp8788_rtc *rtc;
struct device *dev = &pdev->dev;
rtc = devm_kzalloc(dev, sizeof(struct lp8788_rtc), GFP_KERNEL);
if (!rtc)
return -ENOMEM;
rtc->lp = lp;
rtc->alarm = lp->pdata ? lp->pdata->alarm_sel : DEFAULT_ALARM_SEL;
platform_set_drvdata(pdev, rtc);
device_init_wakeup(dev, 1);
rtc->rdev = rtc_device_register("lp8788_rtc", dev,
&lp8788_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rdev)) {
dev_err(dev, "can not register rtc device\n");
return PTR_ERR(rtc->rdev);
}
if (lp8788_alarm_irq_register(pdev, rtc))
dev_warn(lp->dev, "no rtc irq handler\n");
return 0;
}
static int lp8788_rtc_remove(struct platform_device *pdev)
{
struct lp8788_rtc *rtc = platform_get_drvdata(pdev);
rtc_device_unregister(rtc->rdev);
platform_set_drvdata(pdev, NULL);
return 0;
}
static struct platform_driver lp8788_rtc_driver = {
.probe = lp8788_rtc_probe,
.remove = lp8788_rtc_remove,
.driver = {
.name = LP8788_DEV_RTC,
.owner = THIS_MODULE,
},
};
module_platform_driver(lp8788_rtc_driver);
MODULE_DESCRIPTION("Texas Instruments LP8788 RTC Driver");
MODULE_AUTHOR("Milo Kim");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:lp8788-rtc");
drivers/rtc/rtc-max77686.c 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/rtc/rtc-max8907.c
View file @ 7c2db36e
......@@ -205,7 +205,8 @@ static int max8907_rtc_probe(struct platform_device *pdev)
goto err_unregister;
}
ret = request_threaded_irq(rtc->irq, NULL, max8907_irq_handler,
ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
max8907_irq_handler,
IRQF_ONESHOT, "max8907-alarm0", rtc);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to request IRQ%d: %d\n",
......@@ -224,7 +225,6 @@ static int max8907_rtc_remove(struct platform_device *pdev)
{
struct max8907_rtc *rtc = platform_get_drvdata(pdev);
free_irq(rtc->irq, rtc);
rtc_device_unregister(rtc->rtc_dev);
return 0;
......
drivers/rtc/rtc-max8997.c 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/rtc/rtc-mpc5121.c
View file @ 7c2db36e
......@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/io.h>
......@@ -403,17 +404,19 @@ static int mpc5121_rtc_remove(struct platform_device *op)
return 0;
}
#ifdef CONFIG_OF
static struct of_device_id mpc5121_rtc_match[] = {
{ .compatible = "fsl,mpc5121-rtc", },
{ .compatible = "fsl,mpc5200-rtc", },
{},
};
#endif
static struct platform_driver mpc5121_rtc_driver = {
.driver = {
.name = "mpc5121-rtc",
.owner = THIS_MODULE,
.of_match_table = mpc5121_rtc_match,
.of_match_table = of_match_ptr(mpc5121_rtc_match),
},
.probe = mpc5121_rtc_probe,
.remove = mpc5121_rtc_remove,
......
drivers/rtc/rtc-pcf8523.c
View file @ 7c2db36e
......@@ -23,6 +23,7 @@
#define REG_CONTROL3_PM_VDD (1 << 6) /* switch-over disabled */
#define REG_CONTROL3_PM_DSM (1 << 5) /* direct switching mode */
#define REG_CONTROL3_PM_MASK 0xe0
#define REG_CONTROL3_BLF (1 << 2) /* battery low bit, read-only */
#define REG_SECONDS 0x03
#define REG_SECONDS_OS (1 << 7)
......@@ -250,9 +251,39 @@ static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm)
return pcf8523_start_rtc(client);
}
#ifdef CONFIG_RTC_INTF_DEV
static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd,
unsigned long arg)
{
struct i2c_client *client = to_i2c_client(dev);
u8 value;
int ret = 0, err;
switch (cmd) {
case RTC_VL_READ:
err = pcf8523_read(client, REG_CONTROL3, &value);
if (err < 0)
return err;
if (value & REG_CONTROL3_BLF)
ret = 1;
if (copy_to_user((void __user *)arg, &ret, sizeof(int)))
return -EFAULT;
return 0;
default:
return -ENOIOCTLCMD;
}
}
#else
#define pcf8523_rtc_ioctl NULL
#endif
static const struct rtc_class_ops pcf8523_rtc_ops = {
.read_time = pcf8523_rtc_read_time,
.set_time = pcf8523_rtc_set_time,
.ioctl = pcf8523_rtc_ioctl,
};
static int pcf8523_probe(struct i2c_client *client,
......
drivers/rtc/rtc-pcf8563.c
View file @ 7c2db36e
......@@ -181,7 +181,7 @@ static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm)
__func__, err, data[0], data[1]);
return -EIO;
}
};
}
return 0;
}
......
drivers/rtc/rtc-pcf8583.c
View file @ 7c2db36e
......@@ -185,7 +185,7 @@ static int pcf8583_rtc_read_time(struct device *dev, struct rtc_time *tm)
if (ctrl & (CTRL_STOP | CTRL_HOLD)) {
unsigned char new_ctrl = ctrl & ~(CTRL_STOP | CTRL_HOLD);
printk(KERN_WARNING "RTC: resetting control %02x -> %02x\n",
dev_warn(dev, "resetting control %02x -> %02x\n",
ctrl, new_ctrl);
if ((err = pcf8583_set_ctrl(client, &new_ctrl)) < 0)
......
drivers/rtc/rtc-pl031.c
View file @ 7c2db36e
......@@ -384,6 +384,8 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id)
goto out_no_irq;
}
device_init_wakeup(&adev->dev, 1);
return 0;
out_no_irq:
......
drivers/rtc/rtc-pxa.c
View file @ 7c2db36e
......@@ -62,6 +62,10 @@
#define RYxR_MONTH_S 5
#define RYxR_MONTH_MASK (0xf << RYxR_MONTH_S)
#define RYxR_DAY_MASK 0x1f
#define RDxR_WOM_S 20
#define RDxR_WOM_MASK (0x7 << RDxR_WOM_S)
#define RDxR_DOW_S 17
#define RDxR_DOW_MASK (0x7 << RDxR_DOW_S)
#define RDxR_HOUR_S 12
#define RDxR_HOUR_MASK (0x1f << RDxR_HOUR_S)
#define RDxR_MIN_S 6
......@@ -91,6 +95,7 @@ struct pxa_rtc {
spinlock_t lock; /* Protects this structure */
};
static u32 ryxr_calc(struct rtc_time *tm)
{
return ((tm->tm_year + 1900) << RYxR_YEAR_S)
......@@ -100,7 +105,10 @@ static u32 ryxr_calc(struct rtc_time *tm)
static u32 rdxr_calc(struct rtc_time *tm)
{
return (tm->tm_hour << RDxR_HOUR_S) | (tm->tm_min << RDxR_MIN_S)
return ((((tm->tm_mday + 6) / 7) << RDxR_WOM_S) & RDxR_WOM_MASK)
| (((tm->tm_wday + 1) << RDxR_DOW_S) & RDxR_DOW_MASK)
| (tm->tm_hour << RDxR_HOUR_S)
| (tm->tm_min << RDxR_MIN_S)
| tm->tm_sec;
}
......@@ -109,6 +117,7 @@ static void tm_calc(u32 rycr, u32 rdcr, struct rtc_time *tm)
tm->tm_year = ((rycr & RYxR_YEAR_MASK) >> RYxR_YEAR_S) - 1900;
tm->tm_mon = (((rycr & RYxR_MONTH_MASK) >> RYxR_MONTH_S)) - 1;
tm->tm_mday = (rycr & RYxR_DAY_MASK);
tm->tm_wday = ((rycr & RDxR_DOW_MASK) >> RDxR_DOW_S) - 1;
tm->tm_hour = (rdcr & RDxR_HOUR_MASK) >> RDxR_HOUR_S;
tm->tm_min = (rdcr & RDxR_MIN_MASK) >> RDxR_MIN_S;
tm->tm_sec = rdcr & RDxR_SEC_MASK;
......@@ -300,8 +309,6 @@ static int pxa_rtc_proc(struct device *dev, struct seq_file *seq)
}
static const struct rtc_class_ops pxa_rtc_ops = {
.open = pxa_rtc_open,
.release = pxa_rtc_release,
.read_time = pxa_rtc_read_time,
.set_time = pxa_rtc_set_time,
.read_alarm = pxa_rtc_read_alarm,
......@@ -341,7 +348,7 @@ static int __init pxa_rtc_probe(struct platform_device *pdev)
dev_err(dev, "No alarm IRQ resource defined\n");
goto err_ress;
}
pxa_rtc_open(dev);
ret = -ENOMEM;
pxa_rtc->base = ioremap(pxa_rtc->ress->start,
resource_size(pxa_rtc->ress));
......@@ -387,6 +394,9 @@ static int __exit pxa_rtc_remove(struct platform_device *pdev)
{
struct pxa_rtc *pxa_rtc = platform_get_drvdata(pdev);
struct device *dev = &pdev->dev;
pxa_rtc_release(dev);
rtc_device_unregister(pxa_rtc->rtc);
spin_lock_irq(&pxa_rtc->lock);
......@@ -444,10 +454,7 @@ static struct platform_driver pxa_rtc_driver = {
static int __init pxa_rtc_init(void)
{
if (cpu_is_pxa27x() || cpu_is_pxa3xx())
return platform_driver_probe(&pxa_rtc_driver, pxa_rtc_probe);
return -ENODEV;
}
static void __exit pxa_rtc_exit(void)
......
drivers/rtc/rtc-rs5c313.c
View file @ 7c2db36e
......@@ -39,6 +39,8 @@
* 1.13 Nobuhiro Iwamatsu: Updata driver.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/err.h>
#include <linux/rtc.h>
......@@ -352,8 +354,7 @@ static void rs5c313_check_xstp_bit(void)
tm.tm_year = 2000 - 1900;
rs5c313_rtc_set_time(NULL, &tm);
printk(KERN_ERR "RICHO RS5C313: invalid value, resetting to "
"1 Jan 2000\n");
pr_err("invalid value, resetting to 1 Jan 2000\n");
}
RS5C313_CEDISABLE;
ndelay(700); /* CE:L */
......
drivers/rtc/rtc-rs5c372.c
View file @ 7c2db36e
......@@ -311,8 +311,7 @@ static int rs5c_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
buf &= ~RS5C_CTRL1_AALE;
if (i2c_smbus_write_byte_data(client, addr, buf) < 0) {
printk(KERN_WARNING "%s: can't update alarm\n",
rs5c->rtc->name);
dev_warn(dev, "can't update alarm\n");
status = -EIO;
} else
rs5c->regs[RS5C_REG_CTRL1] = buf;
......@@ -381,7 +380,7 @@ static int rs5c_set_alarm(struct device *dev, struct rtc_wkalrm *t)
addr = RS5C_ADDR(RS5C_REG_CTRL1);
buf[0] = rs5c->regs[RS5C_REG_CTRL1] & ~RS5C_CTRL1_AALE;
if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0) {
pr_debug("%s: can't disable alarm\n", rs5c->rtc->name);
dev_dbg(dev, "can't disable alarm\n");
return -EIO;
}
rs5c->regs[RS5C_REG_CTRL1] = buf[0];
......@@ -395,7 +394,7 @@ static int rs5c_set_alarm(struct device *dev, struct rtc_wkalrm *t)
for (i = 0; i < sizeof(buf); i++) {
addr = RS5C_ADDR(RS5C_REG_ALARM_A_MIN + i);
if (i2c_smbus_write_byte_data(client, addr, buf[i]) < 0) {
pr_debug("%s: can't set alarm time\n", rs5c->rtc->name);
dev_dbg(dev, "can't set alarm time\n");
return -EIO;
}
}
......@@ -405,8 +404,7 @@ static int rs5c_set_alarm(struct device *dev, struct rtc_wkalrm *t)
addr = RS5C_ADDR(RS5C_REG_CTRL1);
buf[0] = rs5c->regs[RS5C_REG_CTRL1] | RS5C_CTRL1_AALE;
if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0)
printk(KERN_WARNING "%s: can't enable alarm\n",
rs5c->rtc->name);
dev_warn(dev, "can't enable alarm\n");
rs5c->regs[RS5C_REG_CTRL1] = buf[0];
}
......
drivers/rtc/rtc-rx4581.c 0 → 100644
View file @ 7c2db36e
/* drivers/rtc/rtc-rx4581.c
*
* written by Torben Hohn <torbenh@linutronix.de>
*
* Based on:
* drivers/rtc/rtc-max6902.c
*
* Copyright (C) 2006 8D Technologies inc.
* Copyright (C) 2004 Compulab Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Driver for MAX6902 spi RTC
*
* and based on:
* drivers/rtc/rtc-rx8581.c
*
* An I2C driver for the Epson RX8581 RTC
*
* Author: Martyn Welch <martyn.welch@ge.com>
* Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC)
* Copyright 2005-06 Tower Technologies
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/rtc.h>
#include <linux/spi/spi.h>
#include <linux/bcd.h>
#define RX4581_REG_SC 0x00 /* Second in BCD */
#define RX4581_REG_MN 0x01 /* Minute in BCD */
#define RX4581_REG_HR 0x02 /* Hour in BCD */
#define RX4581_REG_DW 0x03 /* Day of Week */
#define RX4581_REG_DM 0x04 /* Day of Month in BCD */
#define RX4581_REG_MO 0x05 /* Month in BCD */
#define RX4581_REG_YR 0x06 /* Year in BCD */
#define RX4581_REG_RAM 0x07 /* RAM */
#define RX4581_REG_AMN 0x08 /* Alarm Min in BCD*/
#define RX4581_REG_AHR 0x09 /* Alarm Hour in BCD */
#define RX4581_REG_ADM 0x0A
#define RX4581_REG_ADW 0x0A
#define RX4581_REG_TMR0 0x0B
#define RX4581_REG_TMR1 0x0C
#define RX4581_REG_EXT 0x0D /* Extension Register */
#define RX4581_REG_FLAG 0x0E /* Flag Register */
#define RX4581_REG_CTRL 0x0F /* Control Register */
/* Flag Register bit definitions */
#define RX4581_FLAG_UF 0x20 /* Update */
#define RX4581_FLAG_TF 0x10 /* Timer */
#define RX4581_FLAG_AF 0x08 /* Alarm */
#define RX4581_FLAG_VLF 0x02 /* Voltage Low */
/* Control Register bit definitions */
#define RX4581_CTRL_UIE 0x20 /* Update Interrupt Enable */
#define RX4581_CTRL_TIE 0x10 /* Timer Interrupt Enable */
#define RX4581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */
#define RX4581_CTRL_STOP 0x02 /* STOP bit */
#define RX4581_CTRL_RESET 0x01 /* RESET bit */
static int rx4581_set_reg(struct device *dev, unsigned char address,
unsigned char data)
{
struct spi_device *spi = to_spi_device(dev);
unsigned char buf[2];
/* high nibble must be '0' to write */
buf[0] = address & 0x0f;
buf[1] = data;
return spi_write_then_read(spi, buf, 2, NULL, 0);
}
static int rx4581_get_reg(struct device *dev, unsigned char address,
unsigned char *data)
{
struct spi_device *spi = to_spi_device(dev);
/* Set MSB to indicate read */
*data = address | 0x80;
return spi_write_then_read(spi, data, 1, data, 1);
}
/*
* In the routines that deal directly with the rx8581 hardware, we use
* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
*/
static int rx4581_get_datetime(struct device *dev, struct rtc_time *tm)
{
struct spi_device *spi = to_spi_device(dev);
unsigned char date[7];
unsigned char data;
int err;
/* First we ensure that the "update flag" is not set, we read the
* time and date then re-read the "update flag". If the update flag
* has been set, we know that the time has changed during the read so
* we repeat the whole process again.
*/
err = rx4581_get_reg(dev, RX4581_REG_FLAG, &data);
if (err != 0) {
dev_err(dev, "Unable to read device flags\n");
return -EIO;
}
do {
/* If update flag set, clear it */
if (data & RX4581_FLAG_UF) {
err = rx4581_set_reg(dev,
RX4581_REG_FLAG, (data & ~RX4581_FLAG_UF));
if (err != 0) {
dev_err(dev, "Unable to write device "
"flags\n");
return -EIO;
}
}
/* Now read time and date */
date[0] = 0x80;
err = spi_write_then_read(spi, date, 1, date, 7);
if (err < 0) {
dev_err(dev, "Unable to read date\n");
return -EIO;
}
/* Check flag register */
err = rx4581_get_reg(dev, RX4581_REG_FLAG, &data);
if (err != 0) {
dev_err(dev, "Unable to read device flags\n");
return -EIO;
}
} while (data & RX4581_FLAG_UF);
if (data & RX4581_FLAG_VLF)
dev_info(dev,
"low voltage detected, date/time is not reliable.\n");
dev_dbg(dev,
"%s: raw data is sec=%02x, min=%02x, hr=%02x, "
"wday=%02x, mday=%02x, mon=%02x, year=%02x\n",
__func__,
date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
tm->tm_sec = bcd2bin(date[RX4581_REG_SC] & 0x7F);
tm->tm_min = bcd2bin(date[RX4581_REG_MN] & 0x7F);
tm->tm_hour = bcd2bin(date[RX4581_REG_HR] & 0x3F); /* rtc hr 0-23 */
tm->tm_wday = ilog2(date[RX4581_REG_DW] & 0x7F);
tm->tm_mday = bcd2bin(date[RX4581_REG_DM] & 0x3F);
tm->tm_mon = bcd2bin(date[RX4581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
tm->tm_year = bcd2bin(date[RX4581_REG_YR]);
if (tm->tm_year < 70)
tm->tm_year += 100; /* assume we are in 1970...2069 */
dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
err = rtc_valid_tm(tm);
if (err < 0)
dev_err(dev, "retrieved date/time is not valid.\n");
return err;
}
static int rx4581_set_datetime(struct device *dev, struct rtc_time *tm)
{
struct spi_device *spi = to_spi_device(dev);
int err;
unsigned char buf[8], data;
dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
buf[0] = 0x00;
/* hours, minutes and seconds */
buf[RX4581_REG_SC+1] = bin2bcd(tm->tm_sec);
buf[RX4581_REG_MN+1] = bin2bcd(tm->tm_min);
buf[RX4581_REG_HR+1] = bin2bcd(tm->tm_hour);
buf[RX4581_REG_DM+1] = bin2bcd(tm->tm_mday);
/* month, 1 - 12 */
buf[RX4581_REG_MO+1] = bin2bcd(tm->tm_mon + 1);
/* year and century */
buf[RX4581_REG_YR+1] = bin2bcd(tm->tm_year % 100);
buf[RX4581_REG_DW+1] = (0x1 << tm->tm_wday);
/* Stop the clock */
err = rx4581_get_reg(dev, RX4581_REG_CTRL, &data);
if (err != 0) {
dev_err(dev, "Unable to read control register\n");
return -EIO;
}
err = rx4581_set_reg(dev, RX4581_REG_CTRL,
(data | RX4581_CTRL_STOP));
if (err != 0) {
dev_err(dev, "Unable to write control register\n");
return -EIO;
}
/* write register's data */
err = spi_write_then_read(spi, buf, 8, NULL, 0);
if (err != 0) {
dev_err(dev, "Unable to write to date registers\n");
return -EIO;
}
/* get VLF and clear it */
err = rx4581_get_reg(dev, RX4581_REG_FLAG, &data);
if (err != 0) {
dev_err(dev, "Unable to read flag register\n");
return -EIO;
}
err = rx4581_set_reg(dev, RX4581_REG_FLAG,
(data & ~(RX4581_FLAG_VLF)));
if (err != 0) {
dev_err(dev, "Unable to write flag register\n");
return -EIO;
}
/* Restart the clock */
err = rx4581_get_reg(dev, RX4581_REG_CTRL, &data);
if (err != 0) {
dev_err(dev, "Unable to read control register\n");
return -EIO;
}
err = rx4581_set_reg(dev, RX4581_REG_CTRL,
(data & ~(RX4581_CTRL_STOP)));
if (err != 0) {
dev_err(dev, "Unable to write control register\n");
return -EIO;
}
return 0;
}
static const struct rtc_class_ops rx4581_rtc_ops = {
.read_time = rx4581_get_datetime,
.set_time = rx4581_set_datetime,
};
static int rx4581_probe(struct spi_device *spi)
{
struct rtc_device *rtc;
unsigned char tmp;
int res;
res = rx4581_get_reg(&spi->dev, RX4581_REG_SC, &tmp);
if (res != 0)
return res;
rtc = rtc_device_register("rx4581",
&spi->dev, &rx4581_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc))
return PTR_ERR(rtc);
dev_set_drvdata(&spi->dev, rtc);
return 0;
}
static int rx4581_remove(struct spi_device *spi)
{
struct rtc_device *rtc = dev_get_drvdata(&spi->dev);
rtc_device_unregister(rtc);
return 0;
}
static const struct spi_device_id rx4581_id[] = {
{ "rx4581", 0 },
{ }
};
MODULE_DEVICE_TABLE(spi, rx4581_id);
static struct spi_driver rx4581_driver = {
.driver = {
.name = "rtc-rx4581",
.owner = THIS_MODULE,
},
.probe = rx4581_probe,
.remove = rx4581_remove,
.id_table = rx4581_id,
};
module_spi_driver(rx4581_driver);
MODULE_DESCRIPTION("rx4581 spi RTC driver");
MODULE_AUTHOR("Torben Hohn");
MODULE_LICENSE("GPL");
MODULE_ALIAS("spi:rtc-rx4581");
drivers/rtc/rtc-s3c.c
View file @ 7c2db36e
......@@ -115,7 +115,7 @@ static int s3c_rtc_setaie(struct device *dev, unsigned int enabled)
{
unsigned int tmp;
pr_debug("%s: aie=%d\n", __func__, enabled);
dev_dbg(dev, "%s: aie=%d\n", __func__, enabled);
clk_enable(rtc_clk);
tmp = readb(s3c_rtc_base + S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN;
......@@ -203,7 +203,7 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
rtc_tm->tm_year += 100;
pr_debug("read time %04d.%02d.%02d %02d:%02d:%02d\n",
dev_dbg(dev, "read time %04d.%02d.%02d %02d:%02d:%02d\n",
1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
......@@ -218,7 +218,7 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm)
void __iomem *base = s3c_rtc_base;
int year = tm->tm_year - 100;
pr_debug("set time %04d.%02d.%02d %02d:%02d:%02d\n",
dev_dbg(dev, "set time %04d.%02d.%02d %02d:%02d:%02d\n",
1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
......@@ -259,7 +259,7 @@ static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
alrm->enabled = (alm_en & S3C2410_RTCALM_ALMEN) ? 1 : 0;
pr_debug("read alarm %d, %04d.%02d.%02d %02d:%02d:%02d\n",
dev_dbg(dev, "read alarm %d, %04d.%02d.%02d %02d:%02d:%02d\n",
alm_en,
1900 + alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec);
......@@ -310,7 +310,7 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
unsigned int alrm_en;
clk_enable(rtc_clk);
pr_debug("s3c_rtc_setalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n",
dev_dbg(dev, "s3c_rtc_setalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n",
alrm->enabled,
1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
......@@ -333,7 +333,7 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
writeb(bin2bcd(tm->tm_hour), base + S3C2410_ALMHOUR);
}
pr_debug("setting S3C2410_RTCALM to %08x\n", alrm_en);
dev_dbg(dev, "setting S3C2410_RTCALM to %08x\n", alrm_en);
writeb(alrm_en, base + S3C2410_RTCALM);
......@@ -459,7 +459,7 @@ static int s3c_rtc_probe(struct platform_device *pdev)
int ret;
int tmp;
pr_debug("%s: probe=%p\n", __func__, pdev);
dev_dbg(&pdev->dev, "%s: probe=%p\n", __func__, pdev);
/* find the IRQs */
......@@ -475,7 +475,7 @@ static int s3c_rtc_probe(struct platform_device *pdev)
return s3c_rtc_alarmno;
}
pr_debug("s3c2410_rtc: tick irq %d, alarm irq %d\n",
dev_dbg(&pdev->dev, "s3c2410_rtc: tick irq %d, alarm irq %d\n",
s3c_rtc_tickno, s3c_rtc_alarmno);
/* get the memory region */
......@@ -504,7 +504,7 @@ static int s3c_rtc_probe(struct platform_device *pdev)
s3c_rtc_enable(pdev, 1);
pr_debug("s3c2410_rtc: RTCCON=%02x\n",
dev_dbg(&pdev->dev, "s3c2410_rtc: RTCCON=%02x\n",
readw(s3c_rtc_base + S3C2410_RTCCON));
device_init_wakeup(&pdev->dev, 1);
......
drivers/rtc/rtc-sa1100.c
View file @ 7c2db36e
......@@ -108,9 +108,6 @@ static int sa1100_rtc_open(struct device *dev)
struct rtc_device *rtc = info->rtc;
int ret;
ret = clk_prepare_enable(info->clk);
if (ret)
goto fail_clk;
ret = request_irq(info->irq_1hz, sa1100_rtc_interrupt, 0, "rtc 1Hz", dev);
if (ret) {
dev_err(dev, "IRQ %d already in use.\n", info->irq_1hz);
......@@ -130,7 +127,6 @@ static int sa1100_rtc_open(struct device *dev)
free_irq(info->irq_1hz, dev);
fail_ui:
clk_disable_unprepare(info->clk);
fail_clk:
return ret;
}
......@@ -144,7 +140,6 @@ static void sa1100_rtc_release(struct device *dev)
free_irq(info->irq_alarm, dev);
free_irq(info->irq_1hz, dev);
clk_disable_unprepare(info->clk);
}
static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
......@@ -253,6 +248,9 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
spin_lock_init(&info->lock);
platform_set_drvdata(pdev, info);
ret = clk_prepare_enable(info->clk);
if (ret)
goto err_enable_clk;
/*
* According to the manual we should be able to let RTTR be zero
* and then a default diviser for a 32.768KHz clock is used.
......@@ -305,6 +303,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
return 0;
err_dev:
clk_disable_unprepare(info->clk);
err_enable_clk:
platform_set_drvdata(pdev, NULL);
clk_put(info->clk);
err_clk:
......@@ -318,6 +318,7 @@ static int sa1100_rtc_remove(struct platform_device *pdev)
if (info) {
rtc_device_unregister(info->rtc);
clk_disable_unprepare(info->clk);
clk_put(info->clk);
platform_set_drvdata(pdev, NULL);
kfree(info);
......@@ -349,12 +350,14 @@ static const struct dev_pm_ops sa1100_rtc_pm_ops = {
};
#endif
#ifdef CONFIG_OF
static struct of_device_id sa1100_rtc_dt_ids[] = {
{ .compatible = "mrvl,sa1100-rtc", },
{ .compatible = "mrvl,mmp-rtc", },
{}
};
MODULE_DEVICE_TABLE(of, sa1100_rtc_dt_ids);
#endif
static struct platform_driver sa1100_rtc_driver = {
.probe = sa1100_rtc_probe,
......@@ -364,7 +367,7 @@ static struct platform_driver sa1100_rtc_driver = {
#ifdef CONFIG_PM
.pm = &sa1100_rtc_pm_ops,
#endif
.of_match_table = sa1100_rtc_dt_ids,
.of_match_table = of_match_ptr(sa1100_rtc_dt_ids),
},
};
......
drivers/rtc/rtc-snvs.c
View file @ 7c2db36e
......@@ -338,7 +338,7 @@ static struct platform_driver snvs_rtc_driver = {
.name = "snvs_rtc",
.owner = THIS_MODULE,
.pm = &snvs_rtc_pm_ops,
.of_match_table = snvs_dt_ids,
.of_match_table = of_match_ptr(snvs_dt_ids),
},
.probe = snvs_rtc_probe,
.remove = snvs_rtc_remove,
......
drivers/rtc/rtc-stmp3xxx.c
View file @ 7c2db36e
......@@ -26,6 +26,7 @@
#include <linux/rtc.h>
#include <linux/slab.h>
#include <linux/of_device.h>
#include <linux/of.h>
#include <mach/common.h>
......@@ -280,7 +281,7 @@ static struct platform_driver stmp3xxx_rtcdrv = {
.driver = {
.name = "stmp3xxx-rtc",
.owner = THIS_MODULE,
.of_match_table = rtc_dt_ids,
.of_match_table = of_match_ptr(rtc_dt_ids),
},
};
......
drivers/rtc/rtc-sun4v.c
View file @ 7c2db36e
......@@ -3,6 +3,8 @@
* Copyright (C) 2008 David S. Miller <davem@davemloft.net>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
......@@ -26,10 +28,10 @@ static unsigned long hypervisor_get_time(void)
udelay(100);
goto retry;
}
printk(KERN_WARNING "SUN4V: tod_get() timed out.\n");
pr_warn("tod_get() timed out.\n");
return 0;
}
printk(KERN_WARNING "SUN4V: tod_get() not supported.\n");
pr_warn("tod_get() not supported.\n");
return 0;
}
......@@ -53,10 +55,10 @@ static int hypervisor_set_time(unsigned long secs)
udelay(100);
goto retry;
}
printk(KERN_WARNING "SUN4V: tod_set() timed out.\n");
pr_warn("tod_set() timed out.\n");
return -EAGAIN;
}
printk(KERN_WARNING "SUN4V: tod_set() not supported.\n");
pr_warn("tod_set() not supported.\n");
return -EOPNOTSUPP;
}
......
drivers/rtc/rtc-tps6586x.c
View file @ 7c2db36e
......@@ -282,7 +282,8 @@ static int tps6586x_rtc_probe(struct platform_device *pdev)
goto fail_rtc_register;
}
ret = request_threaded_irq(rtc->irq, NULL, tps6586x_rtc_irq,
ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
tps6586x_rtc_irq,
IRQF_ONESHOT | IRQF_EARLY_RESUME,
dev_name(&pdev->dev), rtc);
if (ret < 0) {
......@@ -311,7 +312,6 @@ static int tps6586x_rtc_remove(struct platform_device *pdev)
tps6586x_update(tps_dev, RTC_CTRL, 0,
RTC_ENABLE | OSC_SRC_SEL | PRE_BYPASS | CL_SEL_MASK);
rtc_device_unregister(rtc->rtc);
free_irq(rtc->irq, rtc);
return 0;
}
......
drivers/rtc/rtc-tps65910.c
View file @ 7c2db36e
......@@ -22,13 +22,13 @@
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/interrupt.h>
#include <linux/mfd/tps65910.h>
struct tps65910_rtc {
struct rtc_device *rtc;
/* To store the list of enabled interrupts */
u32 irqstat;
int irq;
};
/* Total number of RTC registers needed to set time*/
......@@ -267,13 +267,14 @@ static int tps65910_rtc_probe(struct platform_device *pdev)
}
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
tps65910_rtc_interrupt, IRQF_TRIGGER_LOW,
tps65910_rtc_interrupt, IRQF_TRIGGER_LOW | IRQF_EARLY_RESUME,
dev_name(&pdev->dev), &pdev->dev);
if (ret < 0) {
dev_err(&pdev->dev, "IRQ is not free.\n");
return ret;
}
device_init_wakeup(&pdev->dev, 1);
tps_rtc->irq = irq;
device_set_wakeup_capable(&pdev->dev, 1);
tps_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
&tps65910_rtc_ops, THIS_MODULE);
......@@ -304,49 +305,36 @@ static int tps65910_rtc_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM_SLEEP
static int tps65910_rtc_suspend(struct device *dev)
{
struct tps65910 *tps = dev_get_drvdata(dev->parent);
u8 alarm = TPS65910_RTC_INTERRUPTS_IT_ALARM;
int ret;
/* Store current list of enabled interrupts*/
ret = regmap_read(tps->regmap, TPS65910_RTC_INTERRUPTS,
&tps->rtc->irqstat);
if (ret < 0)
return ret;
struct tps65910_rtc *tps_rtc = dev_get_drvdata(dev);
/* Enable RTC ALARM interrupt only */
return regmap_write(tps->regmap, TPS65910_RTC_INTERRUPTS, alarm);
if (device_may_wakeup(dev))
enable_irq_wake(tps_rtc->irq);
return 0;
}
static int tps65910_rtc_resume(struct device *dev)
{
struct tps65910 *tps = dev_get_drvdata(dev->parent);
struct tps65910_rtc *tps_rtc = dev_get_drvdata(dev);
/* Restore list of enabled interrupts before suspend */
return regmap_write(tps->regmap, TPS65910_RTC_INTERRUPTS,
tps->rtc->irqstat);
if (device_may_wakeup(dev))
disable_irq_wake(tps_rtc->irq);
return 0;
}
#endif
static const struct dev_pm_ops tps65910_rtc_pm_ops = {
.suspend = tps65910_rtc_suspend,
.resume = tps65910_rtc_resume,
SET_SYSTEM_SLEEP_PM_OPS(tps65910_rtc_suspend, tps65910_rtc_resume)
};
#define DEV_PM_OPS (&tps65910_rtc_pm_ops)
#else
#define DEV_PM_OPS NULL
#endif
static struct platform_driver tps65910_rtc_driver = {
.probe = tps65910_rtc_probe,
.remove = tps65910_rtc_remove,
.driver = {
.owner = THIS_MODULE,
.name = "tps65910-rtc",
.pm = DEV_PM_OPS,
.pm = &tps65910_rtc_pm_ops,
},
};
......
drivers/rtc/rtc-tps80031.c 0 → 100644
View file @ 7c2db36e
/*
* rtc-tps80031.c -- TI TPS80031/TPS80032 RTC driver
*
* RTC driver for TI TPS80031/TPS80032 Fully Integrated
* Power Management with Power Path and Battery Charger
*
* Copyright (c) 2012, NVIDIA Corporation.
*
* Author: Laxman Dewangan <ldewangan@nvidia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
* whether express or implied; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
* 02111-1307, USA
*/
#include <linux/bcd.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mfd/tps80031.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/rtc.h>
#include <linux/slab.h>
#define ENABLE_ALARM_INT 0x08
#define ALARM_INT_STATUS 0x40
/**
* Setting bit to 1 in STOP_RTC will run the RTC and
* setting this bit to 0 will freeze RTC.
*/
#define STOP_RTC 0x1
/* Power on reset Values of RTC registers */
#define TPS80031_RTC_POR_YEAR 0
#define TPS80031_RTC_POR_MONTH 1
#define TPS80031_RTC_POR_DAY 1
/* Numbers of registers for time and alarms */
#define TPS80031_RTC_TIME_NUM_REGS 7
#define TPS80031_RTC_ALARM_NUM_REGS 6
/**
* PMU RTC have only 2 nibbles to store year information, so using an
* offset of 100 to set the base year as 2000 for our driver.
*/
#define RTC_YEAR_OFFSET 100
struct tps80031_rtc {
struct rtc_device *rtc;
int irq;
};
static int tps80031_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
u8 buff[TPS80031_RTC_TIME_NUM_REGS];
int ret;
ret = tps80031_reads(dev->parent, TPS80031_SLAVE_ID1,
TPS80031_SECONDS_REG, TPS80031_RTC_TIME_NUM_REGS, buff);
if (ret < 0) {
dev_err(dev, "reading RTC_SECONDS_REG failed, err = %d\n", ret);
return ret;
}
tm->tm_sec = bcd2bin(buff[0]);
tm->tm_min = bcd2bin(buff[1]);
tm->tm_hour = bcd2bin(buff[2]);
tm->tm_mday = bcd2bin(buff[3]);
tm->tm_mon = bcd2bin(buff[4]) - 1;
tm->tm_year = bcd2bin(buff[5]) + RTC_YEAR_OFFSET;
tm->tm_wday = bcd2bin(buff[6]);
return 0;
}
static int tps80031_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
u8 buff[7];
int ret;
buff[0] = bin2bcd(tm->tm_sec);
buff[1] = bin2bcd(tm->tm_min);
buff[2] = bin2bcd(tm->tm_hour);
buff[3] = bin2bcd(tm->tm_mday);
buff[4] = bin2bcd(tm->tm_mon + 1);
buff[5] = bin2bcd(tm->tm_year % RTC_YEAR_OFFSET);
buff[6] = bin2bcd(tm->tm_wday);
/* Stop RTC while updating the RTC time registers */
ret = tps80031_clr_bits(dev->parent, TPS80031_SLAVE_ID1,
TPS80031_RTC_CTRL_REG, STOP_RTC);
if (ret < 0) {
dev_err(dev->parent, "Stop RTC failed, err = %d\n", ret);
return ret;
}
ret = tps80031_writes(dev->parent, TPS80031_SLAVE_ID1,
TPS80031_SECONDS_REG,
TPS80031_RTC_TIME_NUM_REGS, buff);
if (ret < 0) {
dev_err(dev, "writing RTC_SECONDS_REG failed, err %d\n", ret);
return ret;
}
ret = tps80031_set_bits(dev->parent, TPS80031_SLAVE_ID1,
TPS80031_RTC_CTRL_REG, STOP_RTC);
if (ret < 0)
dev_err(dev->parent, "Start RTC failed, err = %d\n", ret);
return ret;
}
static int tps80031_rtc_alarm_irq_enable(struct device *dev,
unsigned int enable)
{
int ret;
if (enable)
ret = tps80031_set_bits(dev->parent, TPS80031_SLAVE_ID1,
TPS80031_RTC_INTERRUPTS_REG, ENABLE_ALARM_INT);
else
ret = tps80031_clr_bits(dev->parent, TPS80031_SLAVE_ID1,
TPS80031_RTC_INTERRUPTS_REG, ENABLE_ALARM_INT);
if (ret < 0) {
dev_err(dev, "Update on RTC_INT failed, err = %d\n", ret);
return ret;
}
return 0;
}
static int tps80031_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
u8 buff[TPS80031_RTC_ALARM_NUM_REGS];
int ret;
buff[0] = bin2bcd(alrm->time.tm_sec);
buff[1] = bin2bcd(alrm->time.tm_min);
buff[2] = bin2bcd(alrm->time.tm_hour);
buff[3] = bin2bcd(alrm->time.tm_mday);
buff[4] = bin2bcd(alrm->time.tm_mon + 1);
buff[5] = bin2bcd(alrm->time.tm_year % RTC_YEAR_OFFSET);
ret = tps80031_writes(dev->parent, TPS80031_SLAVE_ID1,
TPS80031_ALARM_SECONDS_REG,
TPS80031_RTC_ALARM_NUM_REGS, buff);
if (ret < 0) {
dev_err(dev, "Writing RTC_ALARM failed, err %d\n", ret);
return ret;
}
return tps80031_rtc_alarm_irq_enable(dev, alrm->enabled);
}
static int tps80031_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
u8 buff[6];
int ret;
ret = tps80031_reads(dev->parent, TPS80031_SLAVE_ID1,
TPS80031_ALARM_SECONDS_REG,
TPS80031_RTC_ALARM_NUM_REGS, buff);
if (ret < 0) {
dev_err(dev->parent,
"reading RTC_ALARM failed, err = %d\n", ret);
return ret;
}
alrm->time.tm_sec = bcd2bin(buff[0]);
alrm->time.tm_min = bcd2bin(buff[1]);
alrm->time.tm_hour = bcd2bin(buff[2]);
alrm->time.tm_mday = bcd2bin(buff[3]);
alrm->time.tm_mon = bcd2bin(buff[4]) - 1;
alrm->time.tm_year = bcd2bin(buff[5]) + RTC_YEAR_OFFSET;
return 0;
}
static int clear_alarm_int_status(struct device *dev, struct tps80031_rtc *rtc)
{
int ret;
u8 buf;
/**
* As per datasheet, A dummy read of this RTC_STATUS_REG register
* is necessary before each I2C read in order to update the status
* register value.
*/
ret = tps80031_read(dev->parent, TPS80031_SLAVE_ID1,
TPS80031_RTC_STATUS_REG, &buf);
if (ret < 0) {
dev_err(dev, "reading RTC_STATUS failed. err = %d\n", ret);
return ret;
}
/* clear Alarm status bits.*/
ret = tps80031_set_bits(dev->parent, TPS80031_SLAVE_ID1,
TPS80031_RTC_STATUS_REG, ALARM_INT_STATUS);
if (ret < 0) {
dev_err(dev, "clear Alarm INT failed, err = %d\n", ret);
return ret;
}
return 0;
}
static irqreturn_t tps80031_rtc_irq(int irq, void *data)
{
struct device *dev = data;
struct tps80031_rtc *rtc = dev_get_drvdata(dev);
int ret;
ret = clear_alarm_int_status(dev, rtc);
if (ret < 0)
return ret;
rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
return IRQ_HANDLED;
}
static const struct rtc_class_ops tps80031_rtc_ops = {
.read_time = tps80031_rtc_read_time,
.set_time = tps80031_rtc_set_time,
.set_alarm = tps80031_rtc_set_alarm,
.read_alarm = tps80031_rtc_read_alarm,
.alarm_irq_enable = tps80031_rtc_alarm_irq_enable,
};
static int tps80031_rtc_probe(struct platform_device *pdev)
{
struct tps80031_rtc *rtc;
struct rtc_time tm;
int ret;
rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
if (!rtc)
return -ENOMEM;
rtc->irq = platform_get_irq(pdev, 0);
platform_set_drvdata(pdev, rtc);
/* Start RTC */
ret = tps80031_set_bits(pdev->dev.parent, TPS80031_SLAVE_ID1,
TPS80031_RTC_CTRL_REG, STOP_RTC);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start RTC. err = %d\n", ret);
return ret;
}
/* If RTC have POR values, set time 01:01:2000 */
tps80031_rtc_read_time(&pdev->dev, &tm);
if ((tm.tm_year == RTC_YEAR_OFFSET + TPS80031_RTC_POR_YEAR) &&
(tm.tm_mon == (TPS80031_RTC_POR_MONTH - 1)) &&
(tm.tm_mday == TPS80031_RTC_POR_DAY)) {
tm.tm_year = 2000;
tm.tm_mday = 1;
tm.tm_mon = 1;
ret = tps80031_rtc_set_time(&pdev->dev, &tm);
if (ret < 0) {
dev_err(&pdev->dev,
"RTC set time failed, err = %d\n", ret);
return ret;
}
}
/* Clear alarm intretupt status if it is there */
ret = clear_alarm_int_status(&pdev->dev, rtc);
if (ret < 0) {
dev_err(&pdev->dev, "Clear alarm int failed, err = %d\n", ret);
return ret;
}
rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
&tps80031_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rtc)) {
ret = PTR_ERR(rtc->rtc);
dev_err(&pdev->dev, "RTC registration failed, err %d\n", ret);
return ret;
}
ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
tps80031_rtc_irq,
IRQF_ONESHOT | IRQF_EARLY_RESUME,
dev_name(&pdev->dev), rtc);
if (ret < 0) {
dev_err(&pdev->dev, "request IRQ:%d failed, err = %d\n",
rtc->irq, ret);
rtc_device_unregister(rtc->rtc);
return ret;
}
device_set_wakeup_capable(&pdev->dev, 1);
return 0;
}
static int tps80031_rtc_remove(struct platform_device *pdev)
{
struct tps80031_rtc *rtc = platform_get_drvdata(pdev);
rtc_device_unregister(rtc->rtc);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int tps80031_rtc_suspend(struct device *dev)
{
struct tps80031_rtc *rtc = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
enable_irq_wake(rtc->irq);
return 0;
}
static int tps80031_rtc_resume(struct device *dev)
{
struct tps80031_rtc *rtc = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
disable_irq_wake(rtc->irq);
return 0;
};
#endif
static const struct dev_pm_ops tps80031_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(tps80031_rtc_suspend, tps80031_rtc_resume)
};
static struct platform_driver tps80031_rtc_driver = {
.driver = {
.name = "tps80031-rtc",
.owner = THIS_MODULE,
.pm = &tps80031_pm_ops,
},
.probe = tps80031_rtc_probe,
.remove = tps80031_rtc_remove,
};
module_platform_driver(tps80031_rtc_driver);
MODULE_ALIAS("platform:tps80031-rtc");
MODULE_DESCRIPTION("TI TPS80031/TPS80032 RTC driver");
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
MODULE_LICENSE("GPL v2");
drivers/rtc/rtc-twl.c
View file @ 7c2db36e
......@@ -27,6 +27,7 @@
#include <linux/bcd.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/i2c/twl.h>
......@@ -588,11 +589,14 @@ static int twl_rtc_resume(struct platform_device *pdev)
#define twl_rtc_resume NULL
#endif
#ifdef CONFIG_OF
static const struct of_device_id twl_rtc_of_match[] = {
{.compatible = "ti,twl4030-rtc", },
{ },
};
MODULE_DEVICE_TABLE(of, twl_rtc_of_match);
#endif
MODULE_ALIAS("platform:twl_rtc");
static struct platform_driver twl4030rtc_driver = {
......@@ -604,7 +608,7 @@ static struct platform_driver twl4030rtc_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "twl_rtc",
.of_match_table = twl_rtc_of_match,
.of_match_table = of_match_ptr(twl_rtc_of_match),
},
};
......
drivers/rtc/rtc-vr41xx.c
View file @ 7c2db36e
......@@ -352,7 +352,7 @@ static int rtc_probe(struct platform_device *pdev)
disable_irq(aie_irq);
disable_irq(pie_irq);
printk(KERN_INFO "rtc: Real Time Clock of NEC VR4100 series\n");
dev_info(&pdev->dev, "Real Time Clock of NEC VR4100 series\n");
return 0;
......
drivers/rtc/rtc-vt8500.c
View file @ 7c2db36e
......@@ -231,7 +231,8 @@ static int vt8500_rtc_probe(struct platform_device *pdev)
return -ENXIO;
}
vt8500_rtc->res = request_mem_region(vt8500_rtc->res->start,
vt8500_rtc->res = devm_request_mem_region(&pdev->dev,
vt8500_rtc->res->start,
resource_size(vt8500_rtc->res),
"vt8500-rtc");
if (vt8500_rtc->res == NULL) {
......@@ -239,12 +240,12 @@ static int vt8500_rtc_probe(struct platform_device *pdev)
return -EBUSY;
}
vt8500_rtc->regbase = ioremap(vt8500_rtc->res->start,
vt8500_rtc->regbase = devm_ioremap(&pdev->dev, vt8500_rtc->res->start,
resource_size(vt8500_rtc->res));
if (!vt8500_rtc->regbase) {
dev_err(&pdev->dev, "Unable to map RTC I/O memory\n");
ret = -EBUSY;
goto err_release;
goto err_return;
}
/* Enable RTC and set it to 24-hour mode */
......@@ -257,11 +258,11 @@ static int vt8500_rtc_probe(struct platform_device *pdev)
ret = PTR_ERR(vt8500_rtc->rtc);
dev_err(&pdev->dev,
"Failed to register RTC device -> %d\n", ret);
goto err_unmap;
goto err_return;
}
ret = request_irq(vt8500_rtc->irq_alarm, vt8500_rtc_irq, 0,
"rtc alarm", vt8500_rtc);
ret = devm_request_irq(&pdev->dev, vt8500_rtc->irq_alarm,
vt8500_rtc_irq, 0, "rtc alarm", vt8500_rtc);
if (ret < 0) {
dev_err(&pdev->dev, "can't get irq %i, err %d\n",
vt8500_rtc->irq_alarm, ret);
......@@ -272,11 +273,7 @@ static int vt8500_rtc_probe(struct platform_device *pdev)
err_unreg:
rtc_device_unregister(vt8500_rtc->rtc);
err_unmap:
iounmap(vt8500_rtc->regbase);
err_release:
release_mem_region(vt8500_rtc->res->start,
resource_size(vt8500_rtc->res));
err_return:
return ret;
}
......@@ -284,15 +281,10 @@ static int vt8500_rtc_remove(struct platform_device *pdev)
{
struct vt8500_rtc *vt8500_rtc = platform_get_drvdata(pdev);
free_irq(vt8500_rtc->irq_alarm, vt8500_rtc);
rtc_device_unregister(vt8500_rtc->rtc);
/* Disable alarm matching */
writel(0, vt8500_rtc->regbase + VT8500_RTC_IS);
iounmap(vt8500_rtc->regbase);
release_mem_region(vt8500_rtc->res->start,
resource_size(vt8500_rtc->res));
platform_set_drvdata(pdev, NULL);
......
drivers/rtc/rtc-wm831x.c
View file @ 7c2db36e
......@@ -443,7 +443,8 @@ static int wm831x_rtc_probe(struct platform_device *pdev)
goto err;
}
ret = request_threaded_irq(alm_irq, NULL, wm831x_alm_irq,
ret = devm_request_threaded_irq(&pdev->dev, alm_irq, NULL,
wm831x_alm_irq,
IRQF_TRIGGER_RISING, "RTC alarm",
wm831x_rtc);
if (ret != 0) {
......@@ -462,9 +463,7 @@ static int wm831x_rtc_probe(struct platform_device *pdev)
static int wm831x_rtc_remove(struct platform_device *pdev)
{
struct wm831x_rtc *wm831x_rtc = platform_get_drvdata(pdev);
int alm_irq = platform_get_irq_byname(pdev, "ALM");
free_irq(alm_irq, wm831x_rtc);
rtc_device_unregister(wm831x_rtc->rtc);
return 0;
......
drivers/video/Kconfig
View file @ 7c2db36e
......@@ -364,7 +364,7 @@ config FB_SA1100
Y here.
config FB_IMX
tristate "Freescale i.MX LCD support"
tristate "Freescale i.MX1/21/25/27 LCD support"
depends on FB && IMX_HAVE_PLATFORM_IMX_FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
......@@ -2025,7 +2025,8 @@ config FB_TMIO_ACCELL
config FB_S3C
tristate "Samsung S3C framebuffer support"
depends on FB && (S3C_DEV_FB || S5P_DEV_FIMD0)
depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || ARCH_S5P64X0 || \
ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
......@@ -2183,6 +2184,15 @@ config FB_XILINX
framebuffer. ML300 carries a 640*480 LCD display on the board,
ML403 uses a standard DB15 VGA connector.
config FB_GOLDFISH
tristate "Goldfish Framebuffer"
depends on FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
Framebuffer driver for Goldfish Virtual Platform
config FB_COBALT
tristate "Cobalt server LCD frame buffer support"
depends on FB && (MIPS_COBALT || MIPS_SEAD3)
......@@ -2422,6 +2432,7 @@ config FB_PUV3_UNIGFX
source "drivers/video/omap/Kconfig"
source "drivers/video/omap2/Kconfig"
source "drivers/video/exynos/Kconfig"
source "drivers/video/mmp/Kconfig"
source "drivers/video/backlight/Kconfig"
if VT
......
drivers/video/Makefile
View file @ 7c2db36e
......@@ -98,6 +98,7 @@ obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
obj-$(CONFIG_FB_PVR2) += pvr2fb.o
obj-$(CONFIG_FB_VOODOO1) += sstfb.o
obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o
obj-$(CONFIG_FB_68328) += 68328fb.o
obj-$(CONFIG_FB_GBE) += gbefb.o
obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o
......@@ -105,6 +106,7 @@ obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
obj-$(CONFIG_FB_PXA) += pxafb.o
obj-$(CONFIG_FB_PXA168) += pxa168fb.o
obj-$(CONFIG_PXA3XX_GCU) += pxa3xx-gcu.o
obj-$(CONFIG_MMP_DISP) += mmp/
obj-$(CONFIG_FB_W100) += w100fb.o
obj-$(CONFIG_FB_TMIO) += tmiofb.o
obj-$(CONFIG_FB_AU1100) += au1100fb.o
......
drivers/video/backlight/88pm860x_bl.c
View file @ 7c2db36e
......@@ -165,8 +165,10 @@ static int pm860x_backlight_dt_init(struct platform_device *pdev,
struct pm860x_backlight_data *data,
char *name)
{
struct device_node *nproot = pdev->dev.parent->of_node, *np;
struct device_node *nproot, *np;
int iset = 0;
nproot = of_node_get(pdev->dev.parent->of_node);
if (!nproot)
return -ENODEV;
nproot = of_find_node_by_name(nproot, "backlights");
......@@ -184,6 +186,7 @@ static int pm860x_backlight_dt_init(struct platform_device *pdev,
break;
}
}
of_node_put(nproot);
return 0;
}
#else
......
drivers/video/backlight/Kconfig
View file @ 7c2db36e
......@@ -126,6 +126,21 @@ config LCD_AMS369FG06
If you have an AMS369FG06 AMOLED Panel, say Y to enable its
LCD control driver.
config LCD_LMS501KF03
tristate "LMS501KF03 LCD Driver"
depends on SPI
default n
help
If you have an LMS501KF03 LCD Panel, say Y to enable its
LCD control driver.
config LCD_HX8357
tristate "Himax HX-8357 LCD Driver"
depends on SPI
help
If you have a HX-8357 LCD panel, say Y to enable its LCD control
driver.
endif # LCD_CLASS_DEVICE
#
......@@ -366,7 +381,7 @@ config BACKLIGHT_LP855X
tristate "Backlight driver for TI LP855X"
depends on BACKLIGHT_CLASS_DEVICE && I2C
help
This supports TI LP8550, LP8551, LP8552, LP8553 and LP8556
This supports TI LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
backlight driver.
config BACKLIGHT_OT200
......@@ -390,6 +405,13 @@ config BACKLIGHT_TPS65217
If you have a Texas Instruments TPS65217 say Y to enable the
backlight driver.
config BACKLIGHT_AS3711
tristate "AS3711 Backlight"
depends on BACKLIGHT_CLASS_DEVICE && MFD_AS3711
help
If you have an Austrian Microsystems AS3711 say Y to enable the
backlight driver.
endif # BACKLIGHT_CLASS_DEVICE
endif # BACKLIGHT_LCD_SUPPORT
drivers/video/backlight/Makefile
View file @ 7c2db36e
# Backlight & LCD drivers
obj-$(CONFIG_LCD_AMS369FG06) += ams369fg06.o
obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o
obj-$(CONFIG_LCD_HP700) += jornada720_lcd.o
obj-$(CONFIG_LCD_HX8357) += hx8357.o
obj-$(CONFIG_LCD_ILI9320) += ili9320.o
obj-$(CONFIG_LCD_L4F00242T03) += l4f00242t03.o
obj-$(CONFIG_LCD_LD9040) += ld9040.o
obj-$(CONFIG_LCD_LMS283GF05) += lms283gf05.o
obj-$(CONFIG_LCD_LMS501KF03) += lms501kf03.o
obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
obj-$(CONFIG_LCD_ILI9320) += ili9320.o
obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o
obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
obj-$(CONFIG_LCD_S6E63M0) += s6e63m0.o
obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
obj-$(CONFIG_LCD_S6E63M0) += s6e63m0.o
obj-$(CONFIG_LCD_LD9040) += ld9040.o
obj-$(CONFIG_LCD_AMS369FG06) += ams369fg06.o
obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o
obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o
obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o
obj-$(CONFIG_BACKLIGHT_APPLE) += apple_bl.o
obj-$(CONFIG_BACKLIGHT_AS3711) += as3711_bl.o
obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o
obj-$(CONFIG_BACKLIGHT_DA9052) += da9052_bl.o
obj-$(CONFIG_BACKLIGHT_EP93XX) += ep93xx_bl.o
obj-$(CONFIG_BACKLIGHT_GENERIC) += generic_bl.o
obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o
obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o
obj-$(CONFIG_BACKLIGHT_LM3533) += lm3533_bl.o
obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
obj-$(CONFIG_BACKLIGHT_LM3630) += lm3630_bl.o
obj-$(CONFIG_BACKLIGHT_LM3639) += lm3639_bl.o
obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o
obj-$(CONFIG_BACKLIGHT_MAX8925) += max8925_bl.o
obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o
obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o
obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o
obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o
obj-$(CONFIG_BACKLIGHT_DA9052) += da9052_bl.o
obj-$(CONFIG_BACKLIGHT_MAX8925) += max8925_bl.o
obj-$(CONFIG_BACKLIGHT_APPLE) += apple_bl.o
obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o
obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o
obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o
obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o
obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
drivers/video/backlight/aat2870_bl.c
View file @ 7c2db36e
......@@ -74,7 +74,7 @@ static int aat2870_bl_get_brightness(struct backlight_device *bd)
static int aat2870_bl_update_status(struct backlight_device *bd)
{
struct aat2870_bl_driver_data *aat2870_bl = dev_get_drvdata(&bd->dev);
struct aat2870_bl_driver_data *aat2870_bl = bl_get_data(bd);
struct aat2870_data *aat2870 =
dev_get_drvdata(aat2870_bl->pdev->dev.parent);
int brightness = bd->props.brightness;
......
drivers/video/backlight/adp8860_bl.c
View file @ 7c2db36e
......@@ -783,7 +783,7 @@ static int adp8860_i2c_suspend(struct i2c_client *client, pm_message_t message)
static int adp8860_i2c_resume(struct i2c_client *client)
{
adp8860_set_bits(client, ADP8860_MDCR, NSTBY);
adp8860_set_bits(client, ADP8860_MDCR, NSTBY | BLEN);
return 0;
}
......
drivers/video/backlight/adp8870_bl.c
View file @ 7c2db36e
......@@ -957,7 +957,7 @@ static int adp8870_i2c_suspend(struct i2c_client *client, pm_message_t message)
static int adp8870_i2c_resume(struct i2c_client *client)
{
adp8870_set_bits(client, ADP8870_MDCR, NSTBY);
adp8870_set_bits(client, ADP8870_MDCR, NSTBY | BLEN);
return 0;
}
......
drivers/video/backlight/ams369fg06.c
View file @ 7c2db36e
......@@ -10,25 +10,16 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/wait.h>
#include <linux/module.h>
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/lcd.h>
#include <linux/backlight.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/wait.h>
#define SLEEPMSEC 0x1000
#define ENDDEF 0x2000
......@@ -210,8 +201,9 @@ static int ams369fg06_panel_send_sequence(struct ams369fg06 *lcd,
ret = ams369fg06_spi_write(lcd, wbuf[i], wbuf[i+1]);
if (ret)
break;
} else
mdelay(wbuf[i+1]);
} else {
msleep(wbuf[i+1]);
}
i += 2;
}
......@@ -313,41 +305,32 @@ static int ams369fg06_ldi_disable(struct ams369fg06 *lcd)
static int ams369fg06_power_is_on(int power)
{
return ((power) <= FB_BLANK_NORMAL);
return power <= FB_BLANK_NORMAL;
}
static int ams369fg06_power_on(struct ams369fg06 *lcd)
{
int ret = 0;
struct lcd_platform_data *pd = NULL;
struct backlight_device *bd = NULL;
struct lcd_platform_data *pd;
struct backlight_device *bd;
pd = lcd->lcd_pd;
if (!pd) {
dev_err(lcd->dev, "platform data is NULL.\n");
return -EFAULT;
}
bd = lcd->bd;
if (!bd) {
dev_err(lcd->dev, "backlight device is NULL.\n");
return -EFAULT;
}
if (!pd->power_on) {
dev_err(lcd->dev, "power_on is NULL.\n");
return -EFAULT;
return -EINVAL;
} else {
pd->power_on(lcd->ld, 1);
mdelay(pd->power_on_delay);
msleep(pd->power_on_delay);
}
if (!pd->reset) {
dev_err(lcd->dev, "reset is NULL.\n");
return -EFAULT;
return -EINVAL;
} else {
pd->reset(lcd->ld);
mdelay(pd->reset_delay);
msleep(pd->reset_delay);
}
ret = ams369fg06_ldi_init(lcd);
......@@ -374,14 +357,10 @@ static int ams369fg06_power_on(struct ams369fg06 *lcd)
static int ams369fg06_power_off(struct ams369fg06 *lcd)
{
int ret = 0;
struct lcd_platform_data *pd = NULL;
int ret;
struct lcd_platform_data *pd;
pd = lcd->lcd_pd;
if (!pd) {
dev_err(lcd->dev, "platform data is NULL\n");
return -EFAULT;
}
ret = ams369fg06_ldi_disable(lcd);
if (ret) {
......@@ -389,12 +368,8 @@ static int ams369fg06_power_off(struct ams369fg06 *lcd)
return -EIO;
}
mdelay(pd->power_off_delay);
msleep(pd->power_off_delay);
if (!pd->power_on) {
dev_err(lcd->dev, "power_on is NULL.\n");
return -EFAULT;
} else
pd->power_on(lcd->ld, 0);
return 0;
......@@ -446,7 +421,7 @@ static int ams369fg06_set_brightness(struct backlight_device *bd)
{
int ret = 0;
int brightness = bd->props.brightness;
struct ams369fg06 *lcd = dev_get_drvdata(&bd->dev);
struct ams369fg06 *lcd = bl_get_data(bd);
if (brightness < MIN_BRIGHTNESS ||
brightness > bd->props.max_brightness) {
......@@ -501,7 +476,7 @@ static int ams369fg06_probe(struct spi_device *spi)
lcd->lcd_pd = spi->dev.platform_data;
if (!lcd->lcd_pd) {
dev_err(&spi->dev, "platform data is NULL\n");
return -EFAULT;
return -EINVAL;
}
ld = lcd_device_register("ams369fg06", &spi->dev, lcd,
......@@ -534,10 +509,11 @@ static int ams369fg06_probe(struct spi_device *spi)
lcd->power = FB_BLANK_POWERDOWN;
ams369fg06_power(lcd, FB_BLANK_UNBLANK);
} else
} else {
lcd->power = FB_BLANK_UNBLANK;
}
dev_set_drvdata(&spi->dev, lcd);
spi_set_drvdata(spi, lcd);
dev_info(&spi->dev, "ams369fg06 panel driver has been probed.\n");
......@@ -550,7 +526,7 @@ static int ams369fg06_probe(struct spi_device *spi)
static int ams369fg06_remove(struct spi_device *spi)
{
struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
struct ams369fg06 *lcd = spi_get_drvdata(spi);
ams369fg06_power(lcd, FB_BLANK_POWERDOWN);
backlight_device_unregister(lcd->bd);
......@@ -560,44 +536,26 @@ static int ams369fg06_remove(struct spi_device *spi)
}
#if defined(CONFIG_PM)
static unsigned int before_power;
static int ams369fg06_suspend(struct spi_device *spi, pm_message_t mesg)
{
int ret = 0;
struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
struct ams369fg06 *lcd = spi_get_drvdata(spi);
dev_dbg(&spi->dev, "lcd->power = %d\n", lcd->power);
before_power = lcd->power;
/*
* when lcd panel is suspend, lcd panel becomes off
* regardless of status.
*/
ret = ams369fg06_power(lcd, FB_BLANK_POWERDOWN);
return ret;
return ams369fg06_power(lcd, FB_BLANK_POWERDOWN);
}
static int ams369fg06_resume(struct spi_device *spi)
{
int ret = 0;
struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
struct ams369fg06 *lcd = spi_get_drvdata(spi);
/*
* after suspended, if lcd panel status is FB_BLANK_UNBLANK
* (at that time, before_power is FB_BLANK_UNBLANK) then
* it changes that status to FB_BLANK_POWERDOWN to get lcd on.
*/
if (before_power == FB_BLANK_UNBLANK)
lcd->power = FB_BLANK_POWERDOWN;
dev_dbg(&spi->dev, "before_power = %d\n", before_power);
ret = ams369fg06_power(lcd, before_power);
return ret;
return ams369fg06_power(lcd, FB_BLANK_UNBLANK);
}
#else
#define ams369fg06_suspend NULL
......@@ -606,7 +564,7 @@ static int ams369fg06_resume(struct spi_device *spi)
static void ams369fg06_shutdown(struct spi_device *spi)
{
struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
struct ams369fg06 *lcd = spi_get_drvdata(spi);
ams369fg06_power(lcd, FB_BLANK_POWERDOWN);
}
......
drivers/video/backlight/as3711_bl.c 0 → 100644
View file @ 7c2db36e
/*
* AS3711 PMIC backlight driver, using DCDC Step Up Converters
*
* Copyright (C) 2012 Renesas Electronics Corporation
* Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the version 2 of the GNU General Public License as
* published by the Free Software Foundation
*/
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/fb.h>
#include <linux/kernel.h>
#include <linux/mfd/as3711.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
enum as3711_bl_type {
AS3711_BL_SU1,
AS3711_BL_SU2,
};
struct as3711_bl_data {
bool powered;
const char *fb_name;
struct device *fb_dev;
enum as3711_bl_type type;
int brightness;
struct backlight_device *bl;
};
struct as3711_bl_supply {
struct as3711_bl_data su1;
struct as3711_bl_data su2;
const struct as3711_bl_pdata *pdata;
struct as3711 *as3711;
};
static struct as3711_bl_supply *to_supply(struct as3711_bl_data *su)
{
switch (su->type) {
case AS3711_BL_SU1:
return container_of(su, struct as3711_bl_supply, su1);
case AS3711_BL_SU2:
return container_of(su, struct as3711_bl_supply, su2);
}
return NULL;
}
static int as3711_set_brightness_auto_i(struct as3711_bl_data *data,
unsigned int brightness)
{
struct as3711_bl_supply *supply = to_supply(data);
struct as3711 *as3711 = supply->as3711;
const struct as3711_bl_pdata *pdata = supply->pdata;
int ret = 0;
/* Only all equal current values are supported */
if (pdata->su2_auto_curr1)
ret = regmap_write(as3711->regmap, AS3711_CURR1_VALUE,
brightness);
if (!ret && pdata->su2_auto_curr2)
ret = regmap_write(as3711->regmap, AS3711_CURR2_VALUE,
brightness);
if (!ret && pdata->su2_auto_curr3)
ret = regmap_write(as3711->regmap, AS3711_CURR3_VALUE,
brightness);
return ret;
}
static int as3711_set_brightness_v(struct as3711 *as3711,
unsigned int brightness,
unsigned int reg)
{
if (brightness > 31)
return -EINVAL;
return regmap_update_bits(as3711->regmap, reg, 0xf0,
brightness << 4);
}
static int as3711_bl_su2_reset(struct as3711_bl_supply *supply)
{
struct as3711 *as3711 = supply->as3711;
int ret = regmap_update_bits(as3711->regmap, AS3711_STEPUP_CONTROL_5,
3, supply->pdata->su2_fbprot);
if (!ret)
ret = regmap_update_bits(as3711->regmap,
AS3711_STEPUP_CONTROL_2, 1, 0);
if (!ret)
ret = regmap_update_bits(as3711->regmap,
AS3711_STEPUP_CONTROL_2, 1, 1);
return ret;
}
/*
* Someone with less fragile or less expensive hardware could try to simplify
* the brightness adjustment procedure.
*/
static int as3711_bl_update_status(struct backlight_device *bl)
{
struct as3711_bl_data *data = bl_get_data(bl);
struct as3711_bl_supply *supply = to_supply(data);
struct as3711 *as3711 = supply->as3711;
int brightness = bl->props.brightness;
int ret = 0;
dev_dbg(&bl->dev, "%s(): brightness %u, pwr %x, blank %x, state %x\n",
__func__, bl->props.brightness, bl->props.power,
bl->props.fb_blank, bl->props.state);
if (bl->props.power != FB_BLANK_UNBLANK ||
bl->props.fb_blank != FB_BLANK_UNBLANK ||
bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
brightness = 0;
if (data->type == AS3711_BL_SU1) {
ret = as3711_set_brightness_v(as3711, brightness,
AS3711_STEPUP_CONTROL_1);
} else {
const struct as3711_bl_pdata *pdata = supply->pdata;
switch (pdata->su2_feedback) {
case AS3711_SU2_VOLTAGE:
ret = as3711_set_brightness_v(as3711, brightness,
AS3711_STEPUP_CONTROL_2);
break;
case AS3711_SU2_CURR_AUTO:
ret = as3711_set_brightness_auto_i(data, brightness / 4);
if (ret < 0)
return ret;
if (brightness) {
ret = as3711_bl_su2_reset(supply);
if (ret < 0)
return ret;
udelay(500);
ret = as3711_set_brightness_auto_i(data, brightness);
} else {
ret = regmap_update_bits(as3711->regmap,
AS3711_STEPUP_CONTROL_2, 1, 0);
}
break;
/* Manual one current feedback pin below */
case AS3711_SU2_CURR1:
ret = regmap_write(as3711->regmap, AS3711_CURR1_VALUE,
brightness);
break;
case AS3711_SU2_CURR2:
ret = regmap_write(as3711->regmap, AS3711_CURR2_VALUE,
brightness);
break;
case AS3711_SU2_CURR3:
ret = regmap_write(as3711->regmap, AS3711_CURR3_VALUE,
brightness);
break;
default:
ret = -EINVAL;
}
}
if (!ret)
data->brightness = brightness;
return ret;
}
static int as3711_bl_get_brightness(struct backlight_device *bl)
{
struct as3711_bl_data *data = bl_get_data(bl);
return data->brightness;
}
static const struct backlight_ops as3711_bl_ops = {
.update_status = as3711_bl_update_status,
.get_brightness = as3711_bl_get_brightness,
};
static int as3711_bl_init_su2(struct as3711_bl_supply *supply)
{
struct as3711 *as3711 = supply->as3711;
const struct as3711_bl_pdata *pdata = supply->pdata;
u8 ctl = 0;
int ret;
dev_dbg(as3711->dev, "%s(): use %u\n", __func__, pdata->su2_feedback);
/* Turn SU2 off */
ret = regmap_write(as3711->regmap, AS3711_STEPUP_CONTROL_2, 0);
if (ret < 0)
return ret;
switch (pdata->su2_feedback) {
case AS3711_SU2_VOLTAGE:
ret = regmap_update_bits(as3711->regmap, AS3711_STEPUP_CONTROL_4, 3, 0);
break;
case AS3711_SU2_CURR1:
ctl = 1;
ret = regmap_update_bits(as3711->regmap, AS3711_STEPUP_CONTROL_4, 3, 1);
break;
case AS3711_SU2_CURR2:
ctl = 4;
ret = regmap_update_bits(as3711->regmap, AS3711_STEPUP_CONTROL_4, 3, 2);
break;
case AS3711_SU2_CURR3:
ctl = 0x10;
ret = regmap_update_bits(as3711->regmap, AS3711_STEPUP_CONTROL_4, 3, 3);
break;
case AS3711_SU2_CURR_AUTO:
if (pdata->su2_auto_curr1)
ctl = 2;
if (pdata->su2_auto_curr2)
ctl |= 8;
if (pdata->su2_auto_curr3)
ctl |= 0x20;
ret = 0;
break;
default:
return -EINVAL;
}
if (!ret)
ret = regmap_write(as3711->regmap, AS3711_CURR_CONTROL, ctl);
return ret;
}
static int as3711_bl_register(struct platform_device *pdev,
unsigned int max_brightness, struct as3711_bl_data *su)
{
struct backlight_properties props = {.type = BACKLIGHT_RAW,};
struct backlight_device *bl;
/* max tuning I = 31uA for voltage- and 38250uA for current-feedback */
props.max_brightness = max_brightness;
bl = backlight_device_register(su->type == AS3711_BL_SU1 ?
"as3711-su1" : "as3711-su2",
&pdev->dev, su,
&as3711_bl_ops, &props);
if (IS_ERR(bl)) {
dev_err(&pdev->dev, "failed to register backlight\n");
return PTR_ERR(bl);
}
bl->props.brightness = props.max_brightness;
backlight_update_status(bl);
su->bl = bl;
return 0;
}
static int as3711_backlight_probe(struct platform_device *pdev)
{
struct as3711_bl_pdata *pdata = dev_get_platdata(&pdev->dev);
struct as3711 *as3711 = dev_get_drvdata(pdev->dev.parent);
struct as3711_bl_supply *supply;
struct as3711_bl_data *su;
unsigned int max_brightness;
int ret;
if (!pdata || (!pdata->su1_fb && !pdata->su2_fb)) {
dev_err(&pdev->dev, "No platform data, exiting...\n");
return -ENODEV;
}
/*
* Due to possible hardware damage I chose to block all modes,
* unsupported on my hardware. Anyone, wishing to use any of those modes
* will have to first review the code, then activate and test it.
*/
if (pdata->su1_fb ||
pdata->su2_fbprot != AS3711_SU2_GPIO4 ||
pdata->su2_feedback != AS3711_SU2_CURR_AUTO) {
dev_warn(&pdev->dev,
"Attention! An untested mode has been chosen!\n"
"Please, review the code, enable, test, and report success:-)\n");
return -EINVAL;
}
supply = devm_kzalloc(&pdev->dev, sizeof(*supply), GFP_KERNEL);
if (!supply)
return -ENOMEM;
supply->as3711 = as3711;
supply->pdata = pdata;
if (pdata->su1_fb) {
su = &supply->su1;
su->fb_name = pdata->su1_fb;
su->type = AS3711_BL_SU1;
max_brightness = min(pdata->su1_max_uA, 31);
ret = as3711_bl_register(pdev, max_brightness, su);
if (ret < 0)
return ret;
}
if (pdata->su2_fb) {
su = &supply->su2;
su->fb_name = pdata->su2_fb;
su->type = AS3711_BL_SU2;
switch (pdata->su2_fbprot) {
case AS3711_SU2_GPIO2:
case AS3711_SU2_GPIO3:
case AS3711_SU2_GPIO4:
case AS3711_SU2_LX_SD4:
break;
default:
ret = -EINVAL;
goto esu2;
}
switch (pdata->su2_feedback) {
case AS3711_SU2_VOLTAGE:
max_brightness = min(pdata->su2_max_uA, 31);
break;
case AS3711_SU2_CURR1:
case AS3711_SU2_CURR2:
case AS3711_SU2_CURR3:
case AS3711_SU2_CURR_AUTO:
max_brightness = min(pdata->su2_max_uA / 150, 255);
break;
default:
ret = -EINVAL;
goto esu2;
}
ret = as3711_bl_init_su2(supply);
if (ret < 0)
return ret;
ret = as3711_bl_register(pdev, max_brightness, su);
if (ret < 0)
goto esu2;
}
platform_set_drvdata(pdev, supply);
return 0;
esu2:
backlight_device_unregister(supply->su1.bl);
return ret;
}
static int as3711_backlight_remove(struct platform_device *pdev)
{
struct as3711_bl_supply *supply = platform_get_drvdata(pdev);
backlight_device_unregister(supply->su1.bl);
backlight_device_unregister(supply->su2.bl);
return 0;
}
static struct platform_driver as3711_backlight_driver = {
.driver = {
.name = "as3711-backlight",
.owner = THIS_MODULE,
},
.probe = as3711_backlight_probe,
.remove = as3711_backlight_remove,
};
module_platform_driver(as3711_backlight_driver);
MODULE_DESCRIPTION("Backlight Driver for AS3711 PMICs");
MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:as3711-backlight");
drivers/video/backlight/corgi_lcd.c
View file @ 7c2db36e
......@@ -337,7 +337,7 @@ static void corgi_lcd_power_off(struct corgi_lcd *lcd)
static int corgi_lcd_set_mode(struct lcd_device *ld, struct fb_videomode *m)
{
struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
struct corgi_lcd *lcd = lcd_get_data(ld);
int mode = CORGI_LCD_MODE_QVGA;
if (m->xres == 640 || m->xres == 480)
......@@ -364,7 +364,7 @@ static int corgi_lcd_set_mode(struct lcd_device *ld, struct fb_videomode *m)
static int corgi_lcd_set_power(struct lcd_device *ld, int power)
{
struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
struct corgi_lcd *lcd = lcd_get_data(ld);
if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
corgi_lcd_power_on(lcd);
......@@ -378,7 +378,7 @@ static int corgi_lcd_set_power(struct lcd_device *ld, int power)
static int corgi_lcd_get_power(struct lcd_device *ld)
{
struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
struct corgi_lcd *lcd = lcd_get_data(ld);
return lcd->power;
}
......@@ -391,7 +391,7 @@ static struct lcd_ops corgi_lcd_ops = {
static int corgi_bl_get_intensity(struct backlight_device *bd)
{
struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev);
struct corgi_lcd *lcd = bl_get_data(bd);
return lcd->intensity;
}
......@@ -423,7 +423,7 @@ static int corgi_bl_set_intensity(struct corgi_lcd *lcd, int intensity)
static int corgi_bl_update_status(struct backlight_device *bd)
{
struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev);
struct corgi_lcd *lcd = bl_get_data(bd);
int intensity = bd->props.brightness;
if (bd->props.power != FB_BLANK_UNBLANK)
......@@ -460,7 +460,7 @@ static const struct backlight_ops corgi_bl_ops = {
#ifdef CONFIG_PM
static int corgi_lcd_suspend(struct spi_device *spi, pm_message_t state)
{
struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
struct corgi_lcd *lcd = spi_get_drvdata(spi);
corgibl_flags |= CORGIBL_SUSPENDED;
corgi_bl_set_intensity(lcd, 0);
......@@ -470,7 +470,7 @@ static int corgi_lcd_suspend(struct spi_device *spi, pm_message_t state)
static int corgi_lcd_resume(struct spi_device *spi)
{
struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
struct corgi_lcd *lcd = spi_get_drvdata(spi);
corgibl_flags &= ~CORGIBL_SUSPENDED;
corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
......@@ -577,7 +577,7 @@ static int corgi_lcd_probe(struct spi_device *spi)
lcd->kick_battery = pdata->kick_battery;
dev_set_drvdata(&spi->dev, lcd);
spi_set_drvdata(spi, lcd);
corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
backlight_update_status(lcd->bl_dev);
......@@ -594,7 +594,7 @@ static int corgi_lcd_probe(struct spi_device *spi)
static int corgi_lcd_remove(struct spi_device *spi)
{
struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
struct corgi_lcd *lcd = spi_get_drvdata(spi);
lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
lcd->bl_dev->props.brightness = 0;
......
drivers/video/backlight/hx8357.c 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/backlight/l4f00242t03.c
View file @ 7c2db36e
......@@ -49,7 +49,7 @@ static void l4f00242t03_reset(unsigned int gpio)
static void l4f00242t03_lcd_init(struct spi_device *spi)
{
struct l4f00242t03_pdata *pdata = spi->dev.platform_data;
struct l4f00242t03_priv *priv = dev_get_drvdata(&spi->dev);
struct l4f00242t03_priv *priv = spi_get_drvdata(spi);
const u16 cmd[] = { 0x36, param(0), 0x3A, param(0x60) };
dev_dbg(&spi->dev, "initializing LCD\n");
......@@ -70,7 +70,7 @@ static void l4f00242t03_lcd_init(struct spi_device *spi)
static void l4f00242t03_lcd_powerdown(struct spi_device *spi)
{
struct l4f00242t03_pdata *pdata = spi->dev.platform_data;
struct l4f00242t03_priv *priv = dev_get_drvdata(&spi->dev);
struct l4f00242t03_priv *priv = spi_get_drvdata(spi);
dev_dbg(&spi->dev, "Powering down LCD\n");
......@@ -168,7 +168,7 @@ static int l4f00242t03_probe(struct spi_device *spi)
return -ENOMEM;
}
dev_set_drvdata(&spi->dev, priv);
spi_set_drvdata(spi, priv);
spi->bits_per_word = 9;
spi_setup(spi);
......@@ -190,27 +190,24 @@ static int l4f00242t03_probe(struct spi_device *spi)
return ret;
}
priv->io_reg = regulator_get(&spi->dev, "vdd");
priv->io_reg = devm_regulator_get(&spi->dev, "vdd");
if (IS_ERR(priv->io_reg)) {
dev_err(&spi->dev, "%s: Unable to get the IO regulator\n",
__func__);
return PTR_ERR(priv->io_reg);
}
priv->core_reg = regulator_get(&spi->dev, "vcore");
priv->core_reg = devm_regulator_get(&spi->dev, "vcore");
if (IS_ERR(priv->core_reg)) {
ret = PTR_ERR(priv->core_reg);
dev_err(&spi->dev, "%s: Unable to get the core regulator\n",
__func__);
goto err1;
return PTR_ERR(priv->core_reg);
}
priv->ld = lcd_device_register("l4f00242t03",
&spi->dev, priv, &l4f_ops);
if (IS_ERR(priv->ld)) {
ret = PTR_ERR(priv->ld);
goto err2;
}
if (IS_ERR(priv->ld))
return PTR_ERR(priv->ld);
/* Init the LCD */
l4f00242t03_lcd_init(spi);
......@@ -220,33 +217,22 @@ static int l4f00242t03_probe(struct spi_device *spi)
dev_info(&spi->dev, "Epson l4f00242t03 lcd probed.\n");
return 0;
err2:
regulator_put(priv->core_reg);
err1:
regulator_put(priv->io_reg);
return ret;
}
static int l4f00242t03_remove(struct spi_device *spi)
{
struct l4f00242t03_priv *priv = dev_get_drvdata(&spi->dev);
struct l4f00242t03_priv *priv = spi_get_drvdata(spi);
l4f00242t03_lcd_power_set(priv->ld, FB_BLANK_POWERDOWN);
lcd_device_unregister(priv->ld);
dev_set_drvdata(&spi->dev, NULL);
regulator_put(priv->io_reg);
regulator_put(priv->core_reg);
spi_set_drvdata(spi, NULL);
return 0;
}
static void l4f00242t03_shutdown(struct spi_device *spi)
{
struct l4f00242t03_priv *priv = dev_get_drvdata(&spi->dev);
struct l4f00242t03_priv *priv = spi_get_drvdata(spi);
if (priv)
l4f00242t03_lcd_power_set(priv->ld, FB_BLANK_POWERDOWN);
......
drivers/video/backlight/ld9040.c
View file @ 7c2db36e
This diff is collapsed.
drivers/video/backlight/lm3630_bl.c
View file @ 7c2db36e
......@@ -320,7 +320,7 @@ static int lm3630_backlight_register(struct lm3630_chip_data *pchip,
backlight_device_register(name, pchip->dev, pchip,
&lm3630_bank_a_ops, &props);
if (IS_ERR(pchip->bled1))
return -EIO;
return PTR_ERR(pchip->bled1);
break;
case BLED_2:
props.brightness = pdata->init_brt_led2;
......@@ -329,7 +329,7 @@ static int lm3630_backlight_register(struct lm3630_chip_data *pchip,
backlight_device_register(name, pchip->dev, pchip,
&lm3630_bank_b_ops, &props);
if (IS_ERR(pchip->bled2))
return -EIO;
return PTR_ERR(pchip->bled2);
break;
}
return 0;
......
drivers/video/backlight/lm3639_bl.c
View file @ 7c2db36e
......@@ -350,14 +350,13 @@ static int lm3639_probe(struct i2c_client *client,
&lm3639_bled_ops, &props);
if (IS_ERR(pchip->bled)) {
dev_err(&client->dev, "fail : backlight register\n");
ret = -EIO;
ret = PTR_ERR(pchip->bled);
goto err_out;
}
ret = device_create_file(&(pchip->bled->dev), &dev_attr_bled_mode);
if (ret < 0) {
dev_err(&client->dev, "failed : add sysfs entries\n");
ret = -EIO;
goto err_bled_mode;
}
......@@ -369,7 +368,6 @@ static int lm3639_probe(struct i2c_client *client,
&client->dev, &pchip->cdev_flash);
if (ret < 0) {
dev_err(&client->dev, "fail : flash register\n");
ret = -EIO;
goto err_flash;
}
......@@ -381,7 +379,6 @@ static int lm3639_probe(struct i2c_client *client,
&client->dev, &pchip->cdev_torch);
if (ret < 0) {
dev_err(&client->dev, "fail : torch register\n");
ret = -EIO;
goto err_torch;
}
......
drivers/video/backlight/lms283gf05.c
View file @ 7c2db36e
......@@ -180,7 +180,7 @@ static int lms283gf05_probe(struct spi_device *spi)
st->spi = spi;
st->ld = ld;
dev_set_drvdata(&spi->dev, st);
spi_set_drvdata(spi, st);
/* kick in the LCD */
if (pdata)
......@@ -192,7 +192,7 @@ static int lms283gf05_probe(struct spi_device *spi)
static int lms283gf05_remove(struct spi_device *spi)
{
struct lms283gf05_state *st = dev_get_drvdata(&spi->dev);
struct lms283gf05_state *st = spi_get_drvdata(spi);
lcd_device_unregister(st->ld);
......
drivers/video/backlight/lms501kf03.c 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/backlight/lp855x_bl.c
View file @ 7c2db36e
This diff is collapsed.
drivers/video/backlight/ltv350qv.c
View file @ 7c2db36e
......@@ -252,7 +252,7 @@ static int ltv350qv_probe(struct spi_device *spi)
if (ret)
goto out_unregister;
dev_set_drvdata(&spi->dev, lcd);
spi_set_drvdata(spi, lcd);
return 0;
......@@ -263,7 +263,7 @@ static int ltv350qv_probe(struct spi_device *spi)
static int ltv350qv_remove(struct spi_device *spi)
{
struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
struct ltv350qv *lcd = spi_get_drvdata(spi);
ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
lcd_device_unregister(lcd->ld);
......@@ -274,14 +274,14 @@ static int ltv350qv_remove(struct spi_device *spi)
#ifdef CONFIG_PM
static int ltv350qv_suspend(struct spi_device *spi, pm_message_t state)
{
struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
struct ltv350qv *lcd = spi_get_drvdata(spi);
return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
}
static int ltv350qv_resume(struct spi_device *spi)
{
struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
struct ltv350qv *lcd = spi_get_drvdata(spi);
return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
}
......@@ -293,7 +293,7 @@ static int ltv350qv_resume(struct spi_device *spi)
/* Power down all displays on reboot, poweroff or halt */
static void ltv350qv_shutdown(struct spi_device *spi)
{
struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
struct ltv350qv *lcd = spi_get_drvdata(spi);
ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
}
......
drivers/video/backlight/omap1_bl.c
View file @ 7c2db36e
......@@ -77,7 +77,7 @@ static void omapbl_blank(struct omap_backlight *bl, int mode)
static int omapbl_suspend(struct platform_device *pdev, pm_message_t state)
{
struct backlight_device *dev = platform_get_drvdata(pdev);
struct omap_backlight *bl = dev_get_drvdata(&dev->dev);
struct omap_backlight *bl = bl_get_data(dev);
omapbl_blank(bl, FB_BLANK_POWERDOWN);
return 0;
......@@ -86,7 +86,7 @@ static int omapbl_suspend(struct platform_device *pdev, pm_message_t state)
static int omapbl_resume(struct platform_device *pdev)
{
struct backlight_device *dev = platform_get_drvdata(pdev);
struct omap_backlight *bl = dev_get_drvdata(&dev->dev);
struct omap_backlight *bl = bl_get_data(dev);
omapbl_blank(bl, bl->powermode);
return 0;
......@@ -98,7 +98,7 @@ static int omapbl_resume(struct platform_device *pdev)
static int omapbl_set_power(struct backlight_device *dev, int state)
{
struct omap_backlight *bl = dev_get_drvdata(&dev->dev);
struct omap_backlight *bl = bl_get_data(dev);
omapbl_blank(bl, state);
bl->powermode = state;
......@@ -108,7 +108,7 @@ static int omapbl_set_power(struct backlight_device *dev, int state)
static int omapbl_update_status(struct backlight_device *dev)
{
struct omap_backlight *bl = dev_get_drvdata(&dev->dev);
struct omap_backlight *bl = bl_get_data(dev);
if (bl->current_intensity != dev->props.brightness) {
if (bl->powermode == FB_BLANK_UNBLANK)
......@@ -124,7 +124,7 @@ static int omapbl_update_status(struct backlight_device *dev)
static int omapbl_get_intensity(struct backlight_device *dev)
{
struct omap_backlight *bl = dev_get_drvdata(&dev->dev);
struct omap_backlight *bl = bl_get_data(dev);
return bl->current_intensity;
}
......
drivers/video/backlight/pwm_bl.c
View file @ 7c2db36e
This diff is collapsed.
drivers/video/backlight/s6e63m0.c
View file @ 7c2db36e
This diff is collapsed.
drivers/video/backlight/tdo24m.c
View file @ 7c2db36e
This diff is collapsed.
drivers/video/backlight/tosa_bl.c
View file @ 7c2db36e
......@@ -54,7 +54,7 @@ static void tosa_bl_set_backlight(struct tosa_bl_data *data, int brightness)
static int tosa_bl_update_status(struct backlight_device *dev)
{
struct backlight_properties *props = &dev->props;
struct tosa_bl_data *data = dev_get_drvdata(&dev->dev);
struct tosa_bl_data *data = bl_get_data(dev);
int power = max(props->power, props->fb_blank);
int brightness = props->brightness;
......
drivers/video/backlight/tosa_lcd.c
View file @ 7c2db36e
This diff is collapsed.
drivers/video/backlight/vgg2432a4.c
View file @ 7c2db36e
This diff is collapsed.
drivers/video/console/fbcon.c
View file @ 7c2db36e
This diff is collapsed.
drivers/video/exynos/exynos_dp_core.c
View file @ 7c2db36e
This diff is collapsed.
drivers/video/exynos/exynos_mipi_dsi.c
View file @ 7c2db36e
This diff is collapsed.
drivers/video/exynos/s6e8ax0.c
View file @ 7c2db36e
This diff is collapsed.
drivers/video/goldfishfb.c 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/mmp/Kconfig 0 → 100644
View file @ 7c2db36e
menuconfig MMP_DISP
tristate "Marvell MMP Display Subsystem support"
depends on CPU_PXA910 || CPU_MMP2 || CPU_MMP3 || CPU_PXA988
help
Marvell Display Subsystem support.
if MMP_DISP
source "drivers/video/mmp/hw/Kconfig"
source "drivers/video/mmp/panel/Kconfig"
source "drivers/video/mmp/fb/Kconfig"
endif
drivers/video/mmp/Makefile 0 → 100644
View file @ 7c2db36e
obj-y += core.o hw/ panel/ fb/
drivers/video/mmp/core.c 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/mmp/fb/Kconfig 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/mmp/fb/Makefile 0 → 100644
View file @ 7c2db36e
obj-$(CONFIG_MMP_FB) += mmpfb.o
drivers/video/mmp/fb/mmpfb.c 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/mmp/fb/mmpfb.h 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/mmp/hw/Kconfig 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/mmp/hw/Makefile 0 → 100644
View file @ 7c2db36e
obj-$(CONFIG_MMP_DISP_CONTROLLER) += mmp_ctrl.o
obj-$(CONFIG_MMP_DISP_SPI) += mmp_spi.o
drivers/video/mmp/hw/mmp_ctrl.c 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/mmp/hw/mmp_ctrl.h 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/mmp/hw/mmp_spi.c 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/mmp/panel/Kconfig 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/mmp/panel/Makefile 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/mmp/panel/tpo_tj032md01bw.c 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
drivers/video/mx3fb.c
View file @ 7c2db36e
This diff is collapsed.
fs/9p/vfs_file.c
View file @ 7c2db36e
This diff is collapsed.
fs/binfmt_elf.c
View file @ 7c2db36e
This diff is collapsed.
fs/block_dev.c
View file @ 7c2db36e
This diff is collapsed.
fs/buffer.c
View file @ 7c2db36e
This diff is collapsed.
fs/configfs/dir.c
View file @ 7c2db36e
This diff is collapsed.
fs/ext3/super.c
View file @ 7c2db36e
This diff is collapsed.
fs/ext4/inode.c
View file @ 7c2db36e
This diff is collapsed.
fs/gfs2/file.c
View file @ 7c2db36e
This diff is collapsed.
fs/nilfs2/file.c
View file @ 7c2db36e
This diff is collapsed.
fs/notify/inotify/inotify_user.c
View file @ 7c2db36e
This diff is collapsed.
fs/ocfs2/alloc.c
View file @ 7c2db36e
This diff is collapsed.
fs/ocfs2/aops.c
View file @ 7c2db36e
This diff is collapsed.
fs/ocfs2/cluster/heartbeat.c
View file @ 7c2db36e
This diff is collapsed.
fs/ocfs2/cluster/tcp.c
View file @ 7c2db36e
This diff is collapsed.
fs/ocfs2/dlm/dlmdomain.c
View file @ 7c2db36e
This diff is collapsed.
fs/ocfs2/dlmglue.c
View file @ 7c2db36e
This diff is collapsed.
fs/ocfs2/extent_map.c
View file @ 7c2db36e
This diff is collapsed.
fs/ocfs2/journal.c
View file @ 7c2db36e
This diff is collapsed.
fs/ocfs2/localalloc.c
View file @ 7c2db36e
This diff is collapsed.
fs/ocfs2/stack_o2cb.c
View file @ 7c2db36e
This diff is collapsed.
fs/ocfs2/super.c
View file @ 7c2db36e
This diff is collapsed.
fs/ocfs2/sysfile.c
View file @ 7c2db36e
This diff is collapsed.
fs/ubifs/file.c
View file @ 7c2db36e
This diff is collapsed.
include/linux/backing-dev.h
View file @ 7c2db36e
This diff is collapsed.
include/linux/bug.h
View file @ 7c2db36e
This diff is collapsed.
include/linux/compiler-gcc.h
View file @ 7c2db36e
This diff is collapsed.
include/linux/compiler-gcc3.h
View file @ 7c2db36e
This diff is collapsed.
include/linux/compiler-gcc4.h
View file @ 7c2db36e
This diff is collapsed.
include/linux/compiler.h
View file @ 7c2db36e
This diff is collapsed.
include/linux/lockdep.h
View file @ 7c2db36e
This diff is collapsed.
include/linux/pagemap.h
View file @ 7c2db36e
This diff is collapsed.
include/linux/platform_data/lp855x.h
View file @ 7c2db36e
This diff is collapsed.
include/linux/printk.h
View file @ 7c2db36e
This diff is collapsed.
include/linux/smp.h
View file @ 7c2db36e
This diff is collapsed.
include/uapi/linux/elf.h
View file @ 7c2db36e
This diff is collapsed.
include/uapi/linux/fs.h
View file @ 7c2db36e
This diff is collapsed.
include/video/exynos_mipi_dsim.h
View file @ 7c2db36e
This diff is collapsed.
include/video/mmp_disp.h 0 → 100644
View file @ 7c2db36e
This diff is collapsed.
include/video/samsung_fimd.h
View file @ 7c2db36e
This diff is collapsed.
kernel/compat.c
View file @ 7c2db36e
This diff is collapsed.
kernel/nsproxy.c
View file @ 7c2db36e
This diff is collapsed.
kernel/smp.c
View file @ 7c2db36e
This diff is collapsed.
kernel/sys.c
View file @ 7c2db36e
This diff is collapsed.
kernel/time.c
View file @ 7c2db36e
This diff is collapsed.
lib/Kconfig.debug
View file @ 7c2db36e
This diff is collapsed.
lib/parser.c
View file @ 7c2db36e
This diff is collapsed.
lib/vsprintf.c
View file @ 7c2db36e
This diff is collapsed.
lib/xz/Kconfig
View file @ 7c2db36e
This diff is collapsed.
mm/Kconfig
View file @ 7c2db36e
This diff is collapsed.
mm/backing-dev.c
View file @ 7c2db36e
This diff is collapsed.
mm/bounce.c
View file @ 7c2db36e
This diff is collapsed.
mm/filemap.c
View file @ 7c2db36e
This diff is collapsed.
mm/page-writeback.c
View file @ 7c2db36e
This diff is collapsed.
net/ipv6/Kconfig
View file @ 7c2db36e
This diff is collapsed.
scripts/checkpatch.pl
View file @ 7c2db36e
This diff is collapsed.
scripts/get_maintainer.pl
View file @ 7c2db36e
This diff is collapsed.
scripts/tags.sh
View file @ 7c2db36e
This diff is collapsed.
security/device_cgroup.c
View file @ 7c2db36e
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7