crypto: bcm - convert to use crypto_authenc_extractkeys()

commit ab57b335 upstream.

Convert the bcm crypto driver to use crypto_authenc_extractkeys() so
that it picks up the fix for broken validation of rtattr::rta_len.

This also fixes the DES weak key check to actually be done on the right
key. (It was checking the authentication key, not the encryption key...)

Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/crypto/Kconfig

@@ -679,6 +679,7 @@ config CRYPTO_DEV_BCM_SPU
 	depends on ARCH_BCM_IPROC
 	depends on MAILBOX
 	default m
+	select CRYPTO_AUTHENC
 	select CRYPTO_DES
 	select CRYPTO_MD5
 	select CRYPTO_SHA1

drivers/crypto/bcm/cipher.c

@@ -2846,44 +2846,28 @@ static int aead_authenc_setkey(struct crypto_aead *cipher,
 	struct spu_hw *spu = &iproc_priv.spu;
 	struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher);
 	struct crypto_tfm *tfm = crypto_aead_tfm(cipher);
-	struct rtattr *rta = (void *)key;
-	struct crypto_authenc_key_param *param;
-	const u8 *origkey = key;
-	const unsigned int origkeylen = keylen;
-
-	int ret = 0;
+	struct crypto_authenc_keys keys;
+	int ret;
 
 	flow_log("%s() aead:%p key:%p keylen:%u\n", __func__, cipher, key,
 		 keylen);
 	flow_dump("  key: ", key, keylen);
 
-	if (!RTA_OK(rta, keylen))
-		goto badkey;
-	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
-		goto badkey;
-	if (RTA_PAYLOAD(rta) < sizeof(*param))
+	ret = crypto_authenc_extractkeys(&keys, key, keylen);
+	if (ret)
 		goto badkey;
 
-	param = RTA_DATA(rta);
-	ctx->enckeylen = be32_to_cpu(param->enckeylen);
-
-	key += RTA_ALIGN(rta->rta_len);
-	keylen -= RTA_ALIGN(rta->rta_len);
-
-	if (keylen < ctx->enckeylen)
-		goto badkey;
-	if (ctx->enckeylen > MAX_KEY_SIZE)
+	if (keys.enckeylen > MAX_KEY_SIZE ||
+	    keys.authkeylen > MAX_KEY_SIZE)
 		goto badkey;
 
-	ctx->authkeylen = keylen - ctx->enckeylen;
-
-	if (ctx->authkeylen > MAX_KEY_SIZE)
-		goto badkey;
+	ctx->enckeylen = keys.enckeylen;
+	ctx->authkeylen = keys.authkeylen;
 
-	memcpy(ctx->enckey, key + ctx->authkeylen, ctx->enckeylen);
+	memcpy(ctx->enckey, keys.enckey, keys.enckeylen);
 	/* May end up padding auth key. So make sure it's zeroed. */
 	memset(ctx->authkey, 0, sizeof(ctx->authkey));
-	memcpy(ctx->authkey, key, ctx->authkeylen);
+	memcpy(ctx->authkey, keys.authkey, keys.authkeylen);
 
 	switch (ctx->alg->cipher_info.alg) {
 	case CIPHER_ALG_DES:
@@ -2891,7 +2875,7 @@ static int aead_authenc_setkey(struct crypto_aead *cipher,
 			u32 tmp[DES_EXPKEY_WORDS];
 			u32 flags = CRYPTO_TFM_RES_WEAK_KEY;
 
-			if (des_ekey(tmp, key) == 0) {
+			if (des_ekey(tmp, keys.enckey) == 0) {
 				if (crypto_aead_get_flags(cipher) &
 				    CRYPTO_TFM_REQ_WEAK_KEY) {
 					crypto_aead_set_flags(cipher, flags);
@@ -2906,7 +2890,7 @@ static int aead_authenc_setkey(struct crypto_aead *cipher,
 		break;
 	case CIPHER_ALG_3DES:
 		if (ctx->enckeylen == (DES_KEY_SIZE * 3)) {
-			const u32 *K = (const u32 *)key;
+			const u32 *K = (const u32 *)keys.enckey;
 			u32 flags = CRYPTO_TFM_RES_BAD_KEY_SCHED;
 
 			if (!((K[0] ^ K[2]) | (K[1] ^ K[3])) ||
@@ -2957,9 +2941,7 @@ static int aead_authenc_setkey(struct crypto_aead *cipher,
 		ctx->fallback_cipher->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
 		ctx->fallback_cipher->base.crt_flags |=
 		    tfm->crt_flags & CRYPTO_TFM_REQ_MASK;
-		ret =
-		    crypto_aead_setkey(ctx->fallback_cipher, origkey,
-				       origkeylen);
+		ret = crypto_aead_setkey(ctx->fallback_cipher, key, keylen);
 		if (ret) {
 			flow_log("  fallback setkey() returned:%d\n", ret);
 			tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK;