Merge branch 'viafb-next' of git://git.lwn.net/linux-2.6

* 'viafb-next' of git://git.lwn.net/linux-2.6: (35 commits)
  viafb: move some include files to include/linux
  viafb: Eliminate some global.h references
  viafb: get rid of i2c debug cruft
  viafb: fold via_io.h into via-core.h
  viafb: Fix initialization error paths
  viafb: Do not remove gpiochip under spinlock
  viafb: make procfs entries optional
  viafb: fix proc entry removal
  viafb: improve misc register handling
  viafb: replace inb/outb
  viafb: move some modesetting functions to a seperate file
  viafb: unify modesetting functions
  viafb: Reserve framebuffer memory for the upcoming camera driver
  viafb: Add a simple VX855 DMA engine driver
  viafb: Add a simple interrupt management infrastructure
  via: Rationalize vt1636 detection
  viafb: Introduce viafb_find_i2c_adapter()
  via: Do not attempt I/O on inactive I2C adapters
  viafb: Turn GPIO and i2c into proper platform devices
  viafb: Convert GPIO and i2c to the new indexed port ops
  ...

drivers/video/Kconfig

@@ -1511,6 +1511,7 @@ config FB_VIA
        select FB_CFB_IMAGEBLIT
        select I2C_ALGOBIT
        select I2C
+       select GPIOLIB
        help
 	  This is the frame buffer device driver for Graphics chips of VIA
 	  UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
@@ -1520,6 +1521,21 @@ config FB_VIA
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called viafb.
+
+if FB_VIA
+
+config FB_VIA_DIRECT_PROCFS
+	bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
+	depends on FB_VIA
+	default n
+	help
+	  Allow direct hardware access to some output registers via procfs.
+	  This is dangerous but may provide the only chance to get the
+	  correct output device configuration.
+	  Its use is strongly discouraged.
+
+endif
+
 config FB_NEOMAGIC
 	tristate "NeoMagic display support"
 	depends on FB && PCI

drivers/video/via/Makefile

@@ -4,4 +4,6 @@
 
 obj-$(CONFIG_FB_VIA) += viafb.o
 
-viafb-y	:=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o via_utility.o vt1636.o global.o tblDPASetting.o viamode.o tbl1636.o
+viafb-y	:=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o \
+	via_utility.o vt1636.o global.o tblDPASetting.o viamode.o tbl1636.o \
+	via-core.o via-gpio.o via_modesetting.o

drivers/video/via/accel.c

@@ -18,14 +18,45 @@
  * Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
+#include <linux/via-core.h>
 #include "global.h"
 
+/*
+ * Figure out an appropriate bytes-per-pixel setting.
+ */
+static int viafb_set_bpp(void __iomem *engine, u8 bpp)
+{
+	u32 gemode;
+
+	/* Preserve the reserved bits */
+	/* Lowest 2 bits to zero gives us no rotation */
+	gemode = readl(engine + VIA_REG_GEMODE) & 0xfffffcfc;
+	switch (bpp) {
+	case 8:
+		gemode |= VIA_GEM_8bpp;
+		break;
+	case 16:
+		gemode |= VIA_GEM_16bpp;
+		break;
+	case 32:
+		gemode |= VIA_GEM_32bpp;
+		break;
+	default:
+		printk(KERN_WARNING "viafb_set_bpp: Unsupported bpp %d\n", bpp);
+		return -EINVAL;
+	}
+	writel(gemode, engine + VIA_REG_GEMODE);
+	return 0;
+}
+
+
 static int hw_bitblt_1(void __iomem *engine, u8 op, u32 width, u32 height,
 	u8 dst_bpp, u32 dst_addr, u32 dst_pitch, u32 dst_x, u32 dst_y,
 	u32 *src_mem, u32 src_addr, u32 src_pitch, u32 src_x, u32 src_y,
 	u32 fg_color, u32 bg_color, u8 fill_rop)
 {
 	u32 ge_cmd = 0, tmp, i;
+	int ret;
 
 	if (!op || op > 3) {
 		printk(KERN_WARNING "hw_bitblt_1: Invalid operation: %d\n", op);
@@ -59,22 +90,9 @@ static int hw_bitblt_1(void __iomem *engine, u8 op, u32 width, u32 height,
 		}
 	}
 
-	switch (dst_bpp) {
-	case 8:
-		tmp = 0x00000000;
-		break;
-	case 16:
-		tmp = 0x00000100;
-		break;
-	case 32:
-		tmp = 0x00000300;
-		break;
-	default:
-		printk(KERN_WARNING "hw_bitblt_1: Unsupported bpp %d\n",
-			dst_bpp);
-		return -EINVAL;
-	}
-	writel(tmp, engine + 0x04);
+	ret = viafb_set_bpp(engine, dst_bpp);
+	if (ret)
+		return ret;
 
 	if (op != VIA_BITBLT_FILL) {
 		if (src_x & (op == VIA_BITBLT_MONO ? 0xFFFF8000 : 0xFFFFF000)
@@ -171,6 +189,7 @@ static int hw_bitblt_2(void __iomem *engine, u8 op, u32 width, u32 height,
 	u32 fg_color, u32 bg_color, u8 fill_rop)
 {
 	u32 ge_cmd = 0, tmp, i;
+	int ret;
 
 	if (!op || op > 3) {
 		printk(KERN_WARNING "hw_bitblt_2: Invalid operation: %d\n", op);
@@ -204,22 +223,9 @@ static int hw_bitblt_2(void __iomem *engine, u8 op, u32 width, u32 height,
 		}
 	}
 
-	switch (dst_bpp) {
-	case 8:
-		tmp = 0x00000000;
-		break;
-	case 16:
-		tmp = 0x00000100;
-		break;
-	case 32:
-		tmp = 0x00000300;
-		break;
-	default:
-		printk(KERN_WARNING "hw_bitblt_2: Unsupported bpp %d\n",
-			dst_bpp);
-		return -EINVAL;
-	}
-	writel(tmp, engine + 0x04);
+	ret = viafb_set_bpp(engine, dst_bpp);
+	if (ret)
+		return ret;
 
 	if (op == VIA_BITBLT_FILL)
 		tmp = 0;
@@ -312,17 +318,29 @@ int viafb_init_engine(struct fb_info *info)
 {
 	struct viafb_par *viapar = info->par;
 	void __iomem *engine;
+	int highest_reg, i;
 	u32 vq_start_addr, vq_end_addr, vq_start_low, vq_end_low, vq_high,
 		vq_len, chip_name = viapar->shared->chip_info.gfx_chip_name;
 
-	engine = ioremap_nocache(info->fix.mmio_start, info->fix.mmio_len);
-	viapar->shared->engine_mmio = engine;
+	engine = viapar->shared->vdev->engine_mmio;
 	if (!engine) {
 		printk(KERN_WARNING "viafb_init_accel: ioremap failed, "
 			"hardware acceleration disabled\n");
 		return -ENOMEM;
 	}
 
+	/* Initialize registers to reset the 2D engine */
+	switch (viapar->shared->chip_info.twod_engine) {
+	case VIA_2D_ENG_M1:
+		highest_reg = 0x5c;
+		break;
+	default:
+		highest_reg = 0x40;
+		break;
+	}
+	for (i = 0; i <= highest_reg; i += 4)
+		writel(0x0, engine + i);
+
 	switch (chip_name) {
 	case UNICHROME_CLE266:
 	case UNICHROME_K400:
@@ -352,13 +370,28 @@ int viafb_init_engine(struct fb_info *info)
 	viapar->shared->vq_vram_addr = viapar->fbmem_free;
 	viapar->fbmem_used += VQ_SIZE;
 
-	/* Init 2D engine reg to reset 2D engine */
-	writel(0x0, engine + VIA_REG_KEYCONTROL);
+#if defined(CONFIG_FB_VIA_CAMERA) || defined(CONFIG_FB_VIA_CAMERA_MODULE)
+	/*
+	 * Set aside a chunk of framebuffer memory for the camera
+	 * driver.  Someday this driver probably needs a proper allocator
+	 * for fbmem; for now, we just have to do this before the
+	 * framebuffer initializes itself.
+	 *
+	 * As for the size: the engine can handle three frames,
+	 * 16 bits deep, up to VGA resolution.
+	 */
+	viapar->shared->vdev->camera_fbmem_size = 3*VGA_HEIGHT*VGA_WIDTH*2;
+	viapar->fbmem_free -= viapar->shared->vdev->camera_fbmem_size;
+	viapar->fbmem_used += viapar->shared->vdev->camera_fbmem_size;
+	viapar->shared->vdev->camera_fbmem_offset = viapar->fbmem_free;
+#endif
 
 	/* Init AGP and VQ regs */
 	switch (chip_name) {
 	case UNICHROME_K8M890:
 	case UNICHROME_P4M900:
+	case UNICHROME_VX800:
+	case UNICHROME_VX855:
 		writel(0x00100000, engine + VIA_REG_CR_TRANSET);
 		writel(0x680A0000, engine + VIA_REG_CR_TRANSPACE);
 		writel(0x02000000, engine + VIA_REG_CR_TRANSPACE);
@@ -393,6 +426,8 @@ int viafb_init_engine(struct fb_info *info)
 	switch (chip_name) {
 	case UNICHROME_K8M890:
 	case UNICHROME_P4M900:
+	case UNICHROME_VX800:
+	case UNICHROME_VX855:
 		vq_start_low |= 0x20000000;
 		vq_end_low |= 0x20000000;
 		vq_high |= 0x20000000;
@@ -446,7 +481,7 @@ void viafb_show_hw_cursor(struct fb_info *info, int Status)
 	struct viafb_par *viapar = info->par;
 	u32 temp, iga_path = viapar->iga_path;
 
-	temp = readl(viapar->shared->engine_mmio + VIA_REG_CURSOR_MODE);
+	temp = readl(viapar->shared->vdev->engine_mmio + VIA_REG_CURSOR_MODE);
 	switch (Status) {
 	case HW_Cursor_ON:
 		temp |= 0x1;
@@ -463,23 +498,33 @@ void viafb_show_hw_cursor(struct fb_info *info, int Status)
 	default:
 		temp &= 0x7FFFFFFF;
 	}
-	writel(temp, viapar->shared->engine_mmio + VIA_REG_CURSOR_MODE);
+	writel(temp, viapar->shared->vdev->engine_mmio + VIA_REG_CURSOR_MODE);
 }
 
 void viafb_wait_engine_idle(struct fb_info *info)
 {
 	struct viafb_par *viapar = info->par;
 	int loop = 0;
-
-	while (!(readl(viapar->shared->engine_mmio + VIA_REG_STATUS) &
+	u32 mask;
+	void __iomem *engine = viapar->shared->vdev->engine_mmio;
+
+	switch (viapar->shared->chip_info.twod_engine) {
+	case VIA_2D_ENG_H5:
+	case VIA_2D_ENG_M1:
+		mask = VIA_CMD_RGTR_BUSY_M1 | VIA_2D_ENG_BUSY_M1 |
+			      VIA_3D_ENG_BUSY_M1;
+		break;
+	default:
+		while (!(readl(engine + VIA_REG_STATUS) &
 				VIA_VR_QUEUE_BUSY) && (loop < MAXLOOP)) {
 			loop++;
 			cpu_relax();
 		}
+		mask = VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | VIA_3D_ENG_BUSY;
+		break;
+	}
 
-	while ((readl(viapar->shared->engine_mmio + VIA_REG_STATUS) &
-		    (VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | VIA_3D_ENG_BUSY)) &&
-		    (loop < MAXLOOP)) {
+	while ((readl(engine + VIA_REG_STATUS) & mask) && (loop < MAXLOOP)) {
 		loop++;
 		cpu_relax();
 	}

drivers/video/via/accel.h

@@ -67,6 +67,34 @@
 /* from 0x100 to 0x1ff */
 #define VIA_REG_COLORPAT        0x100
 
+/* defines for VIA 2D registers for vt3353/3409 (M1 engine)*/
+#define VIA_REG_GECMD_M1        0x000
+#define VIA_REG_GEMODE_M1       0x004
+#define VIA_REG_GESTATUS_M1     0x004       /* as same as VIA_REG_GEMODE */
+#define VIA_REG_PITCH_M1        0x008       /* pitch of src and dst */
+#define VIA_REG_DIMENSION_M1    0x00C       /* width and height */
+#define VIA_REG_DSTPOS_M1       0x010
+#define VIA_REG_LINE_XY_M1      0x010
+#define VIA_REG_DSTBASE_M1      0x014
+#define VIA_REG_SRCPOS_M1       0x018
+#define VIA_REG_LINE_K1K2_M1    0x018
+#define VIA_REG_SRCBASE_M1      0x01C
+#define VIA_REG_PATADDR_M1      0x020
+#define VIA_REG_MONOPAT0_M1     0x024
+#define VIA_REG_MONOPAT1_M1     0x028
+#define VIA_REG_OFFSET_M1       0x02C
+#define VIA_REG_LINE_ERROR_M1   0x02C
+#define VIA_REG_CLIPTL_M1       0x040       /* top and left of clipping */
+#define VIA_REG_CLIPBR_M1       0x044       /* bottom and right of clipping */
+#define VIA_REG_KEYCONTROL_M1   0x048       /* color key control */
+#define VIA_REG_FGCOLOR_M1      0x04C
+#define VIA_REG_DSTCOLORKEY_M1  0x04C       /* as same as VIA_REG_FG */
+#define VIA_REG_BGCOLOR_M1      0x050
+#define VIA_REG_SRCCOLORKEY_M1  0x050       /* as same as VIA_REG_BG */
+#define VIA_REG_MONOPATFGC_M1   0x058       /* Add BG color of Pattern. */
+#define VIA_REG_MONOPATBGC_M1   0x05C       /* Add FG color of Pattern. */
+#define VIA_REG_COLORPAT_M1     0x100       /* from 0x100 to 0x1ff */
+
 /* VIA_REG_PITCH(0x38): Pitch Setting */
 #define VIA_PITCH_ENABLE        0x80000000
 
@@ -157,6 +185,18 @@
 /* Virtual Queue is busy */
 #define VIA_VR_QUEUE_BUSY       0x00020000
 
+/* VIA_REG_STATUS(0x400): Engine Status for H5 */
+#define VIA_CMD_RGTR_BUSY_H5   0x00000010  /* Command Regulator is busy */
+#define VIA_2D_ENG_BUSY_H5     0x00000002  /* 2D Engine is busy */
+#define VIA_3D_ENG_BUSY_H5     0x00001FE1  /* 3D Engine is busy */
+#define VIA_VR_QUEUE_BUSY_H5   0x00000004  /* Virtual Queue is busy */
+
+/* VIA_REG_STATUS(0x400): Engine Status for VT3353/3409 */
+#define VIA_CMD_RGTR_BUSY_M1   0x00000010  /* Command Regulator is busy */
+#define VIA_2D_ENG_BUSY_M1     0x00000002  /* 2D Engine is busy */
+#define VIA_3D_ENG_BUSY_M1     0x00001FE1  /* 3D Engine is busy */
+#define VIA_VR_QUEUE_BUSY_M1   0x00000004  /* Virtual Queue is busy */
+
 #define MAXLOOP                 0xFFFFFF
 
 #define VIA_BITBLT_COLOR	1

drivers/video/via/chip.h

@@ -121,9 +121,17 @@ struct lvds_chip_information {
 	int i2c_port;
 };
 
+/* The type of 2D engine */
+enum via_2d_engine {
+	VIA_2D_ENG_H2,
+	VIA_2D_ENG_H5,
+	VIA_2D_ENG_M1,
+};
+
 struct chip_information {
 	int gfx_chip_name;
 	int gfx_chip_revision;
+	enum via_2d_engine twod_engine;
 	struct tmds_chip_information tmds_chip_info;
 	struct lvds_chip_information lvds_chip_info;
 	struct lvds_chip_information lvds_chip_info2;

drivers/video/via/dvi.c

@@ -18,6 +18,8 @@
  * Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
 #include "global.h"
 
 static void tmds_register_write(int index, u8 data);
@@ -96,7 +98,7 @@ int viafb_tmds_trasmitter_identify(void)
 	viaparinfo->chip_info->tmds_chip_info.tmds_chip_name = VT1632_TMDS;
 	viaparinfo->chip_info->
 		tmds_chip_info.tmds_chip_slave_addr = VT1632_TMDS_I2C_ADDR;
-	viaparinfo->chip_info->tmds_chip_info.i2c_port = I2CPORTINDEX;
+	viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_PORT_31;
 	if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID) != FAIL) {
 		/*
 		 * Currently only support 12bits,dual edge,add 24bits mode later
@@ -110,7 +112,7 @@ int viafb_tmds_trasmitter_identify(void)
 			  viaparinfo->chip_info->tmds_chip_info.i2c_port);
 		return OK;
 	} else {
-		viaparinfo->chip_info->tmds_chip_info.i2c_port = GPIOPORTINDEX;
+		viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_PORT_2C;
 		if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID)
 		    != FAIL) {
 			tmds_register_write(0x08, 0x3b);
@@ -160,32 +162,26 @@ int viafb_tmds_trasmitter_identify(void)
 
 static void tmds_register_write(int index, u8 data)
 {
-	viaparinfo->shared->i2c_stuff.i2c_port =
-		viaparinfo->chip_info->tmds_chip_info.i2c_port;
-
-	viafb_i2c_writebyte(viaparinfo->chip_info->tmds_chip_info.
-		tmds_chip_slave_addr, index,
-		     data);
+	viafb_i2c_writebyte(viaparinfo->chip_info->tmds_chip_info.i2c_port,
+			    viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr,
+			    index, data);
 }
 
 static int tmds_register_read(int index)
 {
 	u8 data;
 
-	viaparinfo->shared->i2c_stuff.i2c_port =
-		viaparinfo->chip_info->tmds_chip_info.i2c_port;
-	viafb_i2c_readbyte((u8) viaparinfo->chip_info->
-	    tmds_chip_info.tmds_chip_slave_addr,
+	viafb_i2c_readbyte(viaparinfo->chip_info->tmds_chip_info.i2c_port,
+			   (u8) viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr,
 			   (u8) index, &data);
 	return data;
 }
 
 static int tmds_register_read_bytes(int index, u8 *buff, int buff_len)
 {
-	viaparinfo->shared->i2c_stuff.i2c_port =
-		viaparinfo->chip_info->tmds_chip_info.i2c_port;
-	viafb_i2c_readbytes((u8) viaparinfo->chip_info->tmds_chip_info.
-			 tmds_chip_slave_addr, (u8) index, buff, buff_len);
+	viafb_i2c_readbytes(viaparinfo->chip_info->tmds_chip_info.i2c_port,
+			    (u8) viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr,
+			    (u8) index, buff, buff_len);
 	return 0;
 }
 
@@ -541,8 +537,9 @@ void viafb_dvi_enable(void)
 				else
 					data = 0x37;
 				viafb_i2c_writebyte(viaparinfo->chip_info->
-					     tmds_chip_info.
-					     tmds_chip_slave_addr,
+						       tmds_chip_info.i2c_port,
+						    viaparinfo->chip_info->
+						       tmds_chip_info.tmds_chip_slave_addr,
 						    0x08, data);
 			}
 		}

drivers/video/via/global.h

@@ -41,7 +41,6 @@
 #include "share.h"
 #include "dvi.h"
 #include "viamode.h"
-#include "via_i2c.h"
 #include "hw.h"
 
 #include "lcd.h"

drivers/video/via/hw.h

@@ -24,6 +24,11 @@
 
 #include "viamode.h"
 #include "global.h"
+#include "via_modesetting.h"
+
+#define viafb_read_reg(p, i)			via_read_reg(p, i)
+#define viafb_write_reg(i, p, d)		via_write_reg(p, i, d)
+#define viafb_write_reg_mask(i, p, d, m)	via_write_reg_mask(p, i, d, m)
 
 /***************************************************
 * Definition IGA1 Design Method of CRTC Registers *
@@ -823,8 +828,8 @@ struct iga2_crtc_timing {
 };
 
 /* device ID */
-#define CLE266              0x3123
-#define KM400               0x3205
+#define CLE266_FUNCTION3    0x3123
+#define KM400_FUNCTION3     0x3205
 #define CN400_FUNCTION2     0x2259
 #define CN400_FUNCTION3     0x3259
 /* support VT3314 chipset */
@@ -870,7 +875,6 @@ extern int viafb_LCD_ON;
 extern int viafb_DVI_ON;
 extern int viafb_hotplug;
 
-void viafb_write_reg_mask(u8 index, int io_port, u8 data, u8 mask);
 void viafb_set_output_path(int device, int set_iga,
 	int output_interface);
 
@@ -885,8 +889,6 @@ void viafb_crt_disable(void);
 void viafb_crt_enable(void);
 void init_ad9389(void);
 /* Access I/O Function */
-void viafb_write_reg(u8 index, u16 io_port, u8 data);
-u8 viafb_read_reg(int io_port, u8 index);
 void viafb_lock_crt(void);
 void viafb_unlock_crt(void);
 void viafb_load_fetch_count_reg(int h_addr, int bpp_byte, int set_iga);
@@ -900,20 +902,14 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
 	struct VideoModeTable *vmode_tbl1, int video_bpp1);
 void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
 	struct VideoModeTable *vmode_tbl);
-void viafb_init_chip_info(struct pci_dev *pdev,
-			  const struct pci_device_id *pdi);
+void viafb_init_chip_info(int chip_type);
 void viafb_init_dac(int set_iga);
 int viafb_get_pixclock(int hres, int vres, int vmode_refresh);
 int viafb_get_refresh(int hres, int vres, u32 float_refresh);
 void viafb_update_device_setting(int hres, int vres, int bpp,
 			   int vmode_refresh, int flag);
 
-int viafb_get_fb_size_from_pci(void);
 void viafb_set_iga_path(void);
-void viafb_set_primary_address(u32 addr);
-void viafb_set_secondary_address(u32 addr);
-void viafb_set_primary_pitch(u32 pitch);
-void viafb_set_secondary_pitch(u32 pitch);
 void viafb_set_primary_color_register(u8 index, u8 red, u8 green, u8 blue);
 void viafb_set_secondary_color_register(u8 index, u8 red, u8 green, u8 blue);
 void viafb_get_fb_info(unsigned int *fb_base, unsigned int *fb_len);

drivers/video/via/ioctl.h

@@ -75,7 +75,7 @@
 /*SAMM operation flag*/
 #define OP_SAMM            0x80
 
-#define LCD_PANEL_ID_MAXIMUM	22
+#define LCD_PANEL_ID_MAXIMUM	23
 
 #define STATE_ON            0x1
 #define STATE_OFF           0x0

drivers/video/via/lcd.c

@@ -18,7 +18,8 @@
  * Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
-
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
 #include "global.h"
 #include "lcdtbl.h"
 
@@ -172,18 +173,16 @@ static bool lvds_identify_integratedlvds(void)
 
 int viafb_lvds_trasmitter_identify(void)
 {
-	viaparinfo->shared->i2c_stuff.i2c_port = I2CPORTINDEX;
-	if (viafb_lvds_identify_vt1636()) {
-		viaparinfo->chip_info->lvds_chip_info.i2c_port = I2CPORTINDEX;
+	if (viafb_lvds_identify_vt1636(VIA_PORT_31)) {
+		viaparinfo->chip_info->lvds_chip_info.i2c_port = VIA_PORT_31;
 		DEBUG_MSG(KERN_INFO
-			  "Found VIA VT1636 LVDS on port i2c 0x31 \n");
+			  "Found VIA VT1636 LVDS on port i2c 0x31\n");
 	} else {
-		viaparinfo->shared->i2c_stuff.i2c_port = GPIOPORTINDEX;
-		if (viafb_lvds_identify_vt1636()) {
+		if (viafb_lvds_identify_vt1636(VIA_PORT_2C)) {
 			viaparinfo->chip_info->lvds_chip_info.i2c_port =
-				GPIOPORTINDEX;
+				VIA_PORT_2C;
 			DEBUG_MSG(KERN_INFO
-				  "Found VIA VT1636 LVDS on port gpio 0x2c \n");
+				  "Found VIA VT1636 LVDS on port gpio 0x2c\n");
 		}
 	}
 
@@ -398,6 +397,15 @@ static void fp_id_to_vindex(int panel_id)
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
 		break;
+	case 0x17:
+		/* OLPC XO-1.5 panel */
+		viaparinfo->lvds_setting_info->lcd_panel_hres = 1200;
+		viaparinfo->lvds_setting_info->lcd_panel_vres = 900;
+		viaparinfo->lvds_setting_info->lcd_panel_id =
+			LCD_PANEL_IDD_1200X900;
+		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
+		viaparinfo->lvds_setting_info->LCDDithering = 0;
+		break;
 	default:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 800;
 		viaparinfo->lvds_setting_info->lcd_panel_vres = 600;
@@ -412,9 +420,8 @@ static int lvds_register_read(int index)
 {
 	u8 data;
 
-	viaparinfo->shared->i2c_stuff.i2c_port = GPIOPORTINDEX;
-	viafb_i2c_readbyte((u8) viaparinfo->chip_info->
-	    lvds_chip_info.lvds_chip_slave_addr,
+	viafb_i2c_readbyte(VIA_PORT_2C,
+			(u8) viaparinfo->chip_info->lvds_chip_info.lvds_chip_slave_addr,
 			(u8) index, &data);
 	return data;
 }

drivers/video/via/lcd.h

@@ -60,6 +60,8 @@
 #define     LCD_PANEL_IDB_1360X768     0x0B
 /* Resolution: 480x640,  Channel: single, Dithering: Enable */
 #define     LCD_PANEL_IDC_480X640      0x0C
+/* Resolution: 1200x900,  Channel: single, Dithering: Disable */
+#define     LCD_PANEL_IDD_1200X900      0x0D
 
 
 extern int viafb_LCD2_ON;

drivers/video/via/share.h

@@ -43,16 +43,9 @@
 /* Video Memory Size */
 #define VIDEO_MEMORY_SIZE_16M    0x1000000
 
-/* standard VGA IO port
-*/
-#define VIARMisc    0x3CC
-#define VIAWMisc    0x3C2
-#define VIAStatus   0x3DA
-#define VIACR       0x3D4
-#define VIASR       0x3C4
-#define VIAGR       0x3CE
-#define VIAAR       0x3C0
-
+/*
+ * Lengths of the VPIT structure arrays.
+ */
 #define StdCR       0x19
 #define StdSR       0x04
 #define StdGR       0x09
@@ -570,6 +563,10 @@
 #define M1200X720_R60_HSP       NEGATIVE
 #define M1200X720_R60_VSP       POSITIVE
 
+/* 1200x900@60 Sync Polarity (DCON) */
+#define M1200X900_R60_HSP       NEGATIVE
+#define M1200X900_R60_VSP       NEGATIVE
+
 /* 1280x600@60 Sync Polarity (GTF Mode) */
 #define M1280x600_R60_HSP       NEGATIVE
 #define M1280x600_R60_VSP       POSITIVE
@@ -651,6 +648,7 @@
 #define CLK_52_406M     52406000
 #define CLK_52_977M     52977000
 #define CLK_56_250M     56250000
+#define CLK_57_275M     57275000
 #define CLK_60_466M     60466000
 #define CLK_61_500M     61500000
 #define CLK_65_000M     65000000
@@ -939,6 +937,7 @@
 #define VX855_52_406M     0x00580C03
 #define VX855_52_977M     0x00940C05
 #define VX855_56_250M     0x009D0C05
+#define VX855_57_275M     0x009D8C85    /* Used by XO panel */
 #define VX855_60_466M     0x00A90C05
 #define VX855_61_500M     0x00AC0C05
 #define VX855_65_000M     0x006D0C03
@@ -1065,6 +1064,7 @@
 #define RES_1600X1200_60HZ_PIXCLOCK  6172
 #define RES_1600X1200_75HZ_PIXCLOCK  4938
 #define RES_1280X720_60HZ_PIXCLOCK   13426
+#define RES_1200X900_60HZ_PIXCLOCK   17459
 #define RES_1920X1080_60HZ_PIXCLOCK  5787
 #define RES_1400X1050_60HZ_PIXCLOCK  8214
 #define RES_1400X1050_75HZ_PIXCLOCK  6410

drivers/video/via/via-gpio.c

+/*
+ * Support for viafb GPIO ports.
+ *
+ * Copyright 2009 Jonathan Corbet <corbet@lwn.net>
+ * Distributable under version 2 of the GNU General Public License.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/via-core.h>
+#include <linux/via-gpio.h>
+
+/*
+ * The ports we know about.  Note that the port-25 gpios are not
+ * mentioned in the datasheet.
+ */
+
+struct viafb_gpio {
+	char *vg_name;	/* Data sheet name */
+	u16 vg_io_port;
+	u8  vg_port_index;
+	int  vg_mask_shift;
+};
+
+static struct viafb_gpio viafb_all_gpios[] = {
+	{
+		.vg_name = "VGPIO0",  /* Guess - not in datasheet */
+		.vg_io_port = VIASR,
+		.vg_port_index = 0x25,
+		.vg_mask_shift = 1
+	},
+	{
+		.vg_name = "VGPIO1",
+		.vg_io_port = VIASR,
+		.vg_port_index = 0x25,
+		.vg_mask_shift = 0
+	},
+	{
+		.vg_name = "VGPIO2",  /* aka DISPCLKI0 */
+		.vg_io_port = VIASR,
+		.vg_port_index = 0x2c,
+		.vg_mask_shift = 1
+	},
+	{
+		.vg_name = "VGPIO3",  /* aka DISPCLKO0 */
+		.vg_io_port = VIASR,
+		.vg_port_index = 0x2c,
+		.vg_mask_shift = 0
+	},
+	{
+		.vg_name = "VGPIO4",  /* DISPCLKI1 */
+		.vg_io_port = VIASR,
+		.vg_port_index = 0x3d,
+		.vg_mask_shift = 1
+	},
+	{
+		.vg_name = "VGPIO5",  /* DISPCLKO1 */
+		.vg_io_port = VIASR,
+		.vg_port_index = 0x3d,
+		.vg_mask_shift = 0
+	},
+};
+
+#define VIAFB_NUM_GPIOS ARRAY_SIZE(viafb_all_gpios)
+
+/*
+ * This structure controls the active GPIOs, which may be a subset
+ * of those which are known.
+ */
+
+struct viafb_gpio_cfg {
+	struct gpio_chip gpio_chip;
+	struct viafb_dev *vdev;
+	struct viafb_gpio *active_gpios[VIAFB_NUM_GPIOS];
+	char *gpio_names[VIAFB_NUM_GPIOS];
+};
+
+/*
+ * GPIO access functions
+ */
+static void via_gpio_set(struct gpio_chip *chip, unsigned int nr,
+			 int value)
+{
+	struct viafb_gpio_cfg *cfg = container_of(chip,
+						  struct viafb_gpio_cfg,
+						  gpio_chip);
+	u8 reg;
+	struct viafb_gpio *gpio;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cfg->vdev->reg_lock, flags);
+	gpio = cfg->active_gpios[nr];
+	reg = via_read_reg(VIASR, gpio->vg_port_index);
+	reg |= 0x40 << gpio->vg_mask_shift;  /* output enable */
+	if (value)
+		reg |= 0x10 << gpio->vg_mask_shift;
+	else
+		reg &= ~(0x10 << gpio->vg_mask_shift);
+	via_write_reg(VIASR, gpio->vg_port_index, reg);
+	spin_unlock_irqrestore(&cfg->vdev->reg_lock, flags);
+}
+
+static int via_gpio_dir_out(struct gpio_chip *chip, unsigned int nr,
+			    int value)
+{
+	via_gpio_set(chip, nr, value);
+	return 0;
+}
+
+/*
+ * Set the input direction.  I'm not sure this is right; we should
+ * be able to do input without disabling output.
+ */
+static int via_gpio_dir_input(struct gpio_chip *chip, unsigned int nr)
+{
+	struct viafb_gpio_cfg *cfg = container_of(chip,
+						  struct viafb_gpio_cfg,
+						  gpio_chip);
+	struct viafb_gpio *gpio;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cfg->vdev->reg_lock, flags);
+	gpio = cfg->active_gpios[nr];
+	via_write_reg_mask(VIASR, gpio->vg_port_index, 0,
+			0x40 << gpio->vg_mask_shift);
+	spin_unlock_irqrestore(&cfg->vdev->reg_lock, flags);
+	return 0;
+}
+
+static int via_gpio_get(struct gpio_chip *chip, unsigned int nr)
+{
+	struct viafb_gpio_cfg *cfg = container_of(chip,
+						  struct viafb_gpio_cfg,
+						  gpio_chip);
+	u8 reg;
+	struct viafb_gpio *gpio;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cfg->vdev->reg_lock, flags);
+	gpio = cfg->active_gpios[nr];
+	reg = via_read_reg(VIASR, gpio->vg_port_index);
+	spin_unlock_irqrestore(&cfg->vdev->reg_lock, flags);
+	return reg & (0x04 << gpio->vg_mask_shift);
+}
+
+
+static struct viafb_gpio_cfg gpio_config = {
+	.gpio_chip = {
+		.label = "VIAFB onboard GPIO",
+		.owner = THIS_MODULE,
+		.direction_output = via_gpio_dir_out,
+		.set = via_gpio_set,
+		.direction_input = via_gpio_dir_input,
+		.get = via_gpio_get,
+		.base = -1,
+		.ngpio = 0,
+		.can_sleep = 0
+	}
+};
+
+/*
+ * Manage the software enable bit.
+ */
+static void viafb_gpio_enable(struct viafb_gpio *gpio)
+{
+	via_write_reg_mask(VIASR, gpio->vg_port_index, 0x02, 0x02);
+}
+
+static void viafb_gpio_disable(struct viafb_gpio *gpio)
+{
+	via_write_reg_mask(VIASR, gpio->vg_port_index, 0, 0x02);
+}
+
+/*
+ * Look up a specific gpio and return the number it was assigned.
+ */
+int viafb_gpio_lookup(const char *name)
+{
+	int i;
+
+	for (i = 0; i < gpio_config.gpio_chip.ngpio; i++)
+		if (!strcmp(name, gpio_config.active_gpios[i]->vg_name))
+			return gpio_config.gpio_chip.base + i;
+	return -1;
+}
+EXPORT_SYMBOL_GPL(viafb_gpio_lookup);
+
+/*
+ * Platform device stuff.
+ */
+static __devinit int viafb_gpio_probe(struct platform_device *platdev)
+{
+	struct viafb_dev *vdev = platdev->dev.platform_data;
+	struct via_port_cfg *port_cfg = vdev->port_cfg;
+	int i, ngpio = 0, ret;
+	struct viafb_gpio *gpio;
+	unsigned long flags;
+
+	/*
+	 * Set up entries for all GPIOs which have been configured to
+	 * operate as such (as opposed to as i2c ports).
+	 */
+	for (i = 0; i < VIAFB_NUM_PORTS; i++) {
+		if (port_cfg[i].mode != VIA_MODE_GPIO)
+			continue;
+		for (gpio = viafb_all_gpios;
+		     gpio < viafb_all_gpios + VIAFB_NUM_GPIOS; gpio++)
+			if (gpio->vg_port_index == port_cfg[i].ioport_index) {
+				gpio_config.active_gpios[ngpio] = gpio;
+				gpio_config.gpio_names[ngpio] = gpio->vg_name;
+				ngpio++;
+			}
+	}
+	gpio_config.gpio_chip.ngpio = ngpio;
+	gpio_config.gpio_chip.names = gpio_config.gpio_names;
+	gpio_config.vdev = vdev;
+	if (ngpio == 0) {
+		printk(KERN_INFO "viafb: no GPIOs configured\n");
+		return 0;
+	}
+	/*
+	 * Enable the ports.  They come in pairs, with a single
+	 * enable bit for both.
+	 */
+	spin_lock_irqsave(&gpio_config.vdev->reg_lock, flags);
+	for (i = 0; i < ngpio; i += 2)
+		viafb_gpio_enable(gpio_config.active_gpios[i]);
+	spin_unlock_irqrestore(&gpio_config.vdev->reg_lock, flags);
+	/*
+	 * Get registered.
+	 */
+	gpio_config.gpio_chip.base = -1;  /* Dynamic */
+	ret = gpiochip_add(&gpio_config.gpio_chip);
+	if (ret) {
+		printk(KERN_ERR "viafb: failed to add gpios (%d)\n", ret);
+		gpio_config.gpio_chip.ngpio = 0;
+	}
+	return ret;
+}
+
+
+static int viafb_gpio_remove(struct platform_device *platdev)
+{
+	unsigned long flags;
+	int ret = 0, i;
+
+	/*
+	 * Get unregistered.
+	 */
+	if (gpio_config.gpio_chip.ngpio > 0) {
+		ret = gpiochip_remove(&gpio_config.gpio_chip);
+		if (ret) { /* Somebody still using it? */
+			printk(KERN_ERR "Viafb: GPIO remove failed\n");
+			return ret;
+		}
+	}
+	/*
+	 * Disable the ports.
+	 */
+	spin_lock_irqsave(&gpio_config.vdev->reg_lock, flags);
+	for (i = 0; i < gpio_config.gpio_chip.ngpio; i += 2)
+		viafb_gpio_disable(gpio_config.active_gpios[i]);
+	gpio_config.gpio_chip.ngpio = 0;
+	spin_unlock_irqrestore(&gpio_config.vdev->reg_lock, flags);
+	return ret;
+}
+
+static struct platform_driver via_gpio_driver = {
+	.driver = {
+		.name = "viafb-gpio",
+	},
+	.probe = viafb_gpio_probe,
+	.remove = viafb_gpio_remove,
+};
+
+int viafb_gpio_init(void)
+{
+	return platform_driver_register(&via_gpio_driver);
+}
+
+void viafb_gpio_exit(void)
+{
+	platform_driver_unregister(&via_gpio_driver);
+}

drivers/video/via/via_i2c.c

 /*
- * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
  * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
 
  * This program is free software; you can redistribute it and/or
@@ -19,77 +19,106 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
-#include "global.h"
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
+
+/*
+ * There can only be one set of these, so there's no point in having
+ * them be dynamically allocated...
+ */
+#define VIAFB_NUM_I2C		5
+static struct via_i2c_stuff via_i2c_par[VIAFB_NUM_I2C];
+struct viafb_dev *i2c_vdev;  /* Passed in from core */
 
 static void via_i2c_setscl(void *data, int state)
 {
 	u8 val;
-	struct via_i2c_stuff *via_i2c_chan = (struct via_i2c_stuff *)data;
+	struct via_port_cfg *adap_data = data;
+	unsigned long flags;
 
-	val = viafb_read_reg(VIASR, via_i2c_chan->i2c_port) & 0xF0;
+	spin_lock_irqsave(&i2c_vdev->reg_lock, flags);
+	val = via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0xF0;
 	if (state)
 		val |= 0x20;
 	else
 		val &= ~0x20;
-	switch (via_i2c_chan->i2c_port) {
-	case I2CPORTINDEX:
+	switch (adap_data->type) {
+	case VIA_PORT_I2C:
 		val |= 0x01;
 		break;
-	case GPIOPORTINDEX:
+	case VIA_PORT_GPIO:
 		val |= 0x80;
 		break;
 	default:
-		DEBUG_MSG("via_i2c: specify wrong i2c port.\n");
+		printk(KERN_ERR "viafb_i2c: specify wrong i2c type.\n");
 	}
-	viafb_write_reg(via_i2c_chan->i2c_port, VIASR, val);
+	via_write_reg(adap_data->io_port, adap_data->ioport_index, val);
+	spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags);
 }
 
 static int via_i2c_getscl(void *data)
 {
-	struct via_i2c_stuff *via_i2c_chan = (struct via_i2c_stuff *)data;
+	struct via_port_cfg *adap_data = data;
+	unsigned long flags;
+	int ret = 0;
 
-	if (viafb_read_reg(VIASR, via_i2c_chan->i2c_port) & 0x08)
-		return 1;
-	return 0;
+	spin_lock_irqsave(&i2c_vdev->reg_lock, flags);
+	if (via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0x08)
+		ret = 1;
+	spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags);
+	return ret;
 }
 
 static int via_i2c_getsda(void *data)
 {
-	struct via_i2c_stuff *via_i2c_chan = (struct via_i2c_stuff *)data;
+	struct via_port_cfg *adap_data = data;
+	unsigned long flags;
+	int ret = 0;
 
-	if (viafb_read_reg(VIASR, via_i2c_chan->i2c_port) & 0x04)
-		return 1;
-	return 0;
+	spin_lock_irqsave(&i2c_vdev->reg_lock, flags);
+	if (via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0x04)
+		ret = 1;
+	spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags);
+	return ret;
 }
 
 static void via_i2c_setsda(void *data, int state)
 {
 	u8 val;
-	struct via_i2c_stuff *via_i2c_chan = (struct via_i2c_stuff *)data;
+	struct via_port_cfg *adap_data = data;
+	unsigned long flags;
 
-	val = viafb_read_reg(VIASR, via_i2c_chan->i2c_port) & 0xF0;
+	spin_lock_irqsave(&i2c_vdev->reg_lock, flags);
+	val = via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0xF0;
 	if (state)
 		val |= 0x10;
 	else
 		val &= ~0x10;
-	switch (via_i2c_chan->i2c_port) {
-	case I2CPORTINDEX:
+	switch (adap_data->type) {
+	case VIA_PORT_I2C:
 		val |= 0x01;
 		break;
-	case GPIOPORTINDEX:
+	case VIA_PORT_GPIO:
 		val |= 0x40;
 		break;
 	default:
-		DEBUG_MSG("via_i2c: specify wrong i2c port.\n");
+		printk(KERN_ERR "viafb_i2c: specify wrong i2c type.\n");
 	}
-	viafb_write_reg(via_i2c_chan->i2c_port, VIASR, val);
+	via_write_reg(adap_data->io_port, adap_data->ioport_index, val);
+	spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags);
 }
 
-int viafb_i2c_readbyte(u8 slave_addr, u8 index, u8 *pdata)
+int viafb_i2c_readbyte(u8 adap, u8 slave_addr, u8 index, u8 *pdata)
 {
 	u8 mm1[] = {0x00};
 	struct i2c_msg msgs[2];
 
+	if (!via_i2c_par[adap].is_active)
+		return -ENODEV;
 	*pdata = 0;
 	msgs[0].flags = 0;
 	msgs[1].flags = I2C_M_RD;
@@ -97,81 +126,144 @@ int viafb_i2c_readbyte(u8 slave_addr, u8 index, u8 *pdata)
 	mm1[0] = index;
 	msgs[0].len = 1; msgs[1].len = 1;
 	msgs[0].buf = mm1; msgs[1].buf = pdata;
-	i2c_transfer(&viaparinfo->shared->i2c_stuff.adapter, msgs, 2);
-
-	return 0;
+	return i2c_transfer(&via_i2c_par[adap].adapter, msgs, 2);
 }
 
-int viafb_i2c_writebyte(u8 slave_addr, u8 index, u8 data)
+int viafb_i2c_writebyte(u8 adap, u8 slave_addr, u8 index, u8 data)
 {
 	u8 msg[2] = { index, data };
 	struct i2c_msg msgs;
 
+	if (!via_i2c_par[adap].is_active)
+		return -ENODEV;
 	msgs.flags = 0;
 	msgs.addr = slave_addr / 2;
 	msgs.len = 2;
 	msgs.buf = msg;
-	return i2c_transfer(&viaparinfo->shared->i2c_stuff.adapter, &msgs, 1);
+	return i2c_transfer(&via_i2c_par[adap].adapter, &msgs, 1);
 }
 
-int viafb_i2c_readbytes(u8 slave_addr, u8 index, u8 *buff, int buff_len)
+int viafb_i2c_readbytes(u8 adap, u8 slave_addr, u8 index, u8 *buff, int buff_len)
 {
 	u8 mm1[] = {0x00};
 	struct i2c_msg msgs[2];
 
+	if (!via_i2c_par[adap].is_active)
+		return -ENODEV;
 	msgs[0].flags = 0;
 	msgs[1].flags = I2C_M_RD;
 	msgs[0].addr = msgs[1].addr = slave_addr / 2;
 	mm1[0] = index;
 	msgs[0].len = 1; msgs[1].len = buff_len;
 	msgs[0].buf = mm1; msgs[1].buf = buff;
-	i2c_transfer(&viaparinfo->shared->i2c_stuff.adapter, msgs, 2);
-	return 0;
+	return i2c_transfer(&via_i2c_par[adap].adapter, msgs, 2);
+}
+
+/*
+ * Allow other viafb subdevices to look up a specific adapter
+ * by port name.
+ */
+struct i2c_adapter *viafb_find_i2c_adapter(enum viafb_i2c_adap which)
+{
+	struct via_i2c_stuff *stuff = &via_i2c_par[which];
+
+	return &stuff->adapter;
 }
+EXPORT_SYMBOL_GPL(viafb_find_i2c_adapter);
+
 
-int viafb_create_i2c_bus(void *viapar)
+static int create_i2c_bus(struct i2c_adapter *adapter,
+			  struct i2c_algo_bit_data *algo,
+			  struct via_port_cfg *adap_cfg,
+			  struct pci_dev *pdev)
 {
-	int ret;
-	struct via_i2c_stuff *i2c_stuff =
-		&((struct viafb_par *)viapar)->shared->i2c_stuff;
-
-	strcpy(i2c_stuff->adapter.name, "via_i2c");
-	i2c_stuff->i2c_port = 0x0;
-	i2c_stuff->adapter.owner = THIS_MODULE;
-	i2c_stuff->adapter.id = 0x01FFFF;
-	i2c_stuff->adapter.class = 0;
-	i2c_stuff->adapter.algo_data = &i2c_stuff->algo;
-	i2c_stuff->adapter.dev.parent = NULL;
-	i2c_stuff->algo.setsda = via_i2c_setsda;
-	i2c_stuff->algo.setscl = via_i2c_setscl;
-	i2c_stuff->algo.getsda = via_i2c_getsda;
-	i2c_stuff->algo.getscl = via_i2c_getscl;
-	i2c_stuff->algo.udelay = 40;
-	i2c_stuff->algo.timeout = 20;
-	i2c_stuff->algo.data = i2c_stuff;
-
-	i2c_set_adapdata(&i2c_stuff->adapter, i2c_stuff);
+	algo->setsda = via_i2c_setsda;
+	algo->setscl = via_i2c_setscl;
+	algo->getsda = via_i2c_getsda;
+	algo->getscl = via_i2c_getscl;
+	algo->udelay = 40;
+	algo->timeout = 20;
+	algo->data = adap_cfg;
 
-	/* Raise SCL and SDA */
-	i2c_stuff->i2c_port = I2CPORTINDEX;
-	via_i2c_setsda(i2c_stuff, 1);
-	via_i2c_setscl(i2c_stuff, 1);
+	sprintf(adapter->name, "viafb i2c io_port idx 0x%02x",
+		adap_cfg->ioport_index);
+	adapter->owner = THIS_MODULE;
+	adapter->id = 0x01FFFF;
+	adapter->class = I2C_CLASS_DDC;
+	adapter->algo_data = algo;
+	if (pdev)
+		adapter->dev.parent = &pdev->dev;
+	else
+		adapter->dev.parent = NULL;
+	/* i2c_set_adapdata(adapter, adap_cfg); */
 
-	i2c_stuff->i2c_port = GPIOPORTINDEX;
-	via_i2c_setsda(i2c_stuff, 1);
-	via_i2c_setscl(i2c_stuff, 1);
+	/* Raise SCL and SDA */
+	via_i2c_setsda(adap_cfg, 1);
+	via_i2c_setscl(adap_cfg, 1);
 	udelay(20);
 
-	ret = i2c_bit_add_bus(&i2c_stuff->adapter);
-	if (ret == 0)
-		DEBUG_MSG("I2C bus %s registered.\n", i2c_stuff->adapter.name);
-	else
-		DEBUG_MSG("Failed to register I2C bus %s.\n",
-			i2c_stuff->adapter.name);
-	return ret;
+	return i2c_bit_add_bus(adapter);
+}
+
+static int viafb_i2c_probe(struct platform_device *platdev)
+{
+	int i, ret;
+	struct via_port_cfg *configs;
+
+	i2c_vdev = platdev->dev.platform_data;
+	configs = i2c_vdev->port_cfg;
+
+	for (i = 0; i < VIAFB_NUM_PORTS; i++) {
+		struct via_port_cfg *adap_cfg = configs++;
+		struct via_i2c_stuff *i2c_stuff = &via_i2c_par[i];
+
+		i2c_stuff->is_active = 0;
+		if (adap_cfg->type == 0 || adap_cfg->mode != VIA_MODE_I2C)
+			continue;
+		ret = create_i2c_bus(&i2c_stuff->adapter,
+				     &i2c_stuff->algo, adap_cfg,
+				NULL); /* FIXME: PCIDEV */
+		if (ret < 0) {
+			printk(KERN_ERR "viafb: cannot create i2c bus %u:%d\n",
+				i, ret);
+			continue;  /* Still try to make the rest */
+		}
+		i2c_stuff->is_active = 1;
+	}
+
+	return 0;
+}
+
+static int viafb_i2c_remove(struct platform_device *platdev)
+{
+	int i;
+
+	for (i = 0; i < VIAFB_NUM_PORTS; i++) {
+		struct via_i2c_stuff *i2c_stuff = &via_i2c_par[i];
+		/*
+		 * Only remove those entries in the array that we've
+		 * actually used (and thus initialized algo_data)
+		 */
+		if (i2c_stuff->is_active)
+			i2c_del_adapter(&i2c_stuff->adapter);
+	}
+	return 0;
+}
+
+static struct platform_driver via_i2c_driver = {
+	.driver = {
+		.name = "viafb-i2c",
+	},
+	.probe = viafb_i2c_probe,
+	.remove = viafb_i2c_remove,
+};
+
+int viafb_i2c_init(void)
+{
+	return platform_driver_register(&via_i2c_driver);
 }
 
-void viafb_delete_i2c_buss(void *par)
+void viafb_i2c_exit(void)
 {
-	i2c_del_adapter(&((struct viafb_par *)par)->shared->i2c_stuff.adapter);
+	platform_driver_unregister(&via_i2c_driver);
 }

drivers/video/via/via_modesetting.c

+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2010 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * basic modesetting functions
+ */
+
+#include <linux/kernel.h>
+#include <linux/via-core.h>
+#include "via_modesetting.h"
+#include "share.h"
+#include "debug.h"
+
+void via_set_primary_address(u32 addr)
+{
+	DEBUG_MSG(KERN_DEBUG "via_set_primary_address(0x%08X)\n", addr);
+	via_write_reg(VIACR, 0x0D, addr & 0xFF);
+	via_write_reg(VIACR, 0x0C, (addr >> 8) & 0xFF);
+	via_write_reg(VIACR, 0x34, (addr >> 16) & 0xFF);
+	via_write_reg_mask(VIACR, 0x48, (addr >> 24) & 0x1F, 0x1F);
+}
+
+void via_set_secondary_address(u32 addr)
+{
+	DEBUG_MSG(KERN_DEBUG "via_set_secondary_address(0x%08X)\n", addr);
+	/* secondary display supports only quadword aligned memory */
+	via_write_reg_mask(VIACR, 0x62, (addr >> 2) & 0xFE, 0xFE);
+	via_write_reg(VIACR, 0x63, (addr >> 10) & 0xFF);
+	via_write_reg(VIACR, 0x64, (addr >> 18) & 0xFF);
+	via_write_reg_mask(VIACR, 0xA3, (addr >> 26) & 0x07, 0x07);
+}
+
+void via_set_primary_pitch(u32 pitch)
+{
+	DEBUG_MSG(KERN_DEBUG "via_set_primary_pitch(0x%08X)\n", pitch);
+	/* spec does not say that first adapter skips 3 bits but old
+	 * code did it and seems to be reasonable in analogy to 2nd adapter
+	 */
+	pitch = pitch >> 3;
+	via_write_reg(VIACR, 0x13, pitch & 0xFF);
+	via_write_reg_mask(VIACR, 0x35, (pitch >> (8 - 5)) & 0xE0, 0xE0);
+}
+
+void via_set_secondary_pitch(u32 pitch)
+{
+	DEBUG_MSG(KERN_DEBUG "via_set_secondary_pitch(0x%08X)\n", pitch);
+	pitch = pitch >> 3;
+	via_write_reg(VIACR, 0x66, pitch & 0xFF);
+	via_write_reg_mask(VIACR, 0x67, (pitch >> 8) & 0x03, 0x03);
+	via_write_reg_mask(VIACR, 0x71, (pitch >> (10 - 7)) & 0x80, 0x80);
+}
+
+void via_set_primary_color_depth(u8 depth)
+{
+	u8 value;
+
+	DEBUG_MSG(KERN_DEBUG "via_set_primary_color_depth(%d)\n", depth);
+	switch (depth) {
+	case 8:
+		value = 0x00;
+		break;
+	case 15:
+		value = 0x04;
+		break;
+	case 16:
+		value = 0x14;
+		break;
+	case 24:
+		value = 0x0C;
+		break;
+	case 30:
+		value = 0x08;
+		break;
+	default:
+		printk(KERN_WARNING "via_set_primary_color_depth: "
+			"Unsupported depth: %d\n", depth);
+		return;
+	}
+
+	via_write_reg_mask(VIASR, 0x15, value, 0x1C);
+}
+
+void via_set_secondary_color_depth(u8 depth)
+{
+	u8 value;
+
+	DEBUG_MSG(KERN_DEBUG "via_set_secondary_color_depth(%d)\n", depth);
+	switch (depth) {
+	case 8:
+		value = 0x00;
+		break;
+	case 16:
+		value = 0x40;
+		break;
+	case 24:
+		value = 0xC0;
+		break;
+	case 30:
+		value = 0x80;
+		break;
+	default:
+		printk(KERN_WARNING "via_set_secondary_color_depth: "
+			"Unsupported depth: %d\n", depth);
+		return;
+	}
+
+	via_write_reg_mask(VIACR, 0x67, value, 0xC0);
+}

drivers/video/via/via_modesetting.h

+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2010 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * basic modesetting functions
+ */
+
+#ifndef __VIA_MODESETTING_H__
+#define __VIA_MODESETTING_H__
+
+#include <linux/types.h>
+
+void via_set_primary_address(u32 addr);
+void via_set_secondary_address(u32 addr);
+void via_set_primary_pitch(u32 pitch);
+void via_set_secondary_pitch(u32 pitch);
+void via_set_primary_color_depth(u8 depth);
+void via_set_secondary_color_depth(u8 depth);
+
+#endif /* __VIA_MODESETTING_H__ */

drivers/video/via/via_utility.c

@@ -19,6 +19,7 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/via-core.h>
 #include "global.h"
 
 void viafb_get_device_support_state(u32 *support_state)

drivers/video/via/viafbdev.h

@@ -24,12 +24,12 @@
 
 #include <linux/proc_fs.h>
 #include <linux/fb.h>
+#include <linux/spinlock.h>
 
 #include "ioctl.h"
 #include "share.h"
 #include "chip.h"
 #include "hw.h"
-#include "via_i2c.h"
 
 #define VERSION_MAJOR       2
 #define VERSION_KERNEL      6	/* For kernel 2.6 */
@@ -37,11 +37,11 @@
 #define VERSION_OS          0	/* 0: for 32 bits OS, 1: for 64 bits OS */
 #define VERSION_MINOR       4
 
+#define VIAFB_NUM_I2C		5
+
 struct viafb_shared {
 	struct proc_dir_entry *proc_entry;	/*viafb proc entry */
-
-	/* I2C stuff */
-	struct via_i2c_stuff i2c_stuff;
+	struct viafb_dev *vdev;			/* Global dev info */
 
 	/* All the information will be needed to set engine */
 	struct tmds_setting_information tmds_setting_info;
@@ -51,7 +51,6 @@ struct viafb_shared {
 	struct chip_information chip_info;
 
 	/* hardware acceleration stuff */
-	void __iomem *engine_mmio;
 	u32 cursor_vram_addr;
 	u32 vq_vram_addr;	/* virtual queue address in video ram */
 	int (*hw_bitblt)(void __iomem *engine, u8 op, u32 width, u32 height,
@@ -99,4 +98,9 @@ u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
 void viafb_gpio_i2c_write_mask_lvds(struct lvds_setting_information
 			      *plvds_setting_info, struct lvds_chip_information
 			      *plvds_chip_info, struct IODATA io_data);
+int via_fb_pci_probe(struct viafb_dev *vdev);
+void via_fb_pci_remove(struct pci_dev *pdev);
+/* Temporary */
+int viafb_init(void);
+void viafb_exit(void);
 #endif /* __VIAFBDEV_H__ */

drivers/video/via/viamode.c

@@ -19,6 +19,7 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/via-core.h>
 #include "global.h"
 struct res_map_refresh res_map_refresh_tbl[] = {
 /*hres, vres, vclock, vmode_refresh*/
@@ -66,6 +67,7 @@ struct res_map_refresh res_map_refresh_tbl[] = {
 	{1088, 612, RES_1088X612_60HZ_PIXCLOCK, 60},
 	{1152, 720, RES_1152X720_60HZ_PIXCLOCK, 60},
 	{1200, 720, RES_1200X720_60HZ_PIXCLOCK, 60},
+	{1200, 900, RES_1200X900_60HZ_PIXCLOCK, 60},
 	{1280, 600, RES_1280X600_60HZ_PIXCLOCK, 60},
 	{1280, 720, RES_1280X720_50HZ_PIXCLOCK, 50},
 	{1280, 768, RES_1280X768_50HZ_PIXCLOCK, 50},
@@ -759,6 +761,16 @@ struct crt_mode_table CRTM1200x720[] = {
 	 {1568, 1200, 1200, 368, 1256, 128, 746, 720, 720, 26, 721, 3} }
 };
 
+/* 1200x900 (DCON) */
+struct crt_mode_table DCON1200x900[] = {
+	/* r_rate,          vclk,               hsp,               vsp   */
+	{REFRESH_60, CLK_57_275M, M1200X900_R60_HSP, M1200X900_R60_VSP,
+	/* The correct htotal is 1240, but this doesn't raster on VX855. */
+	/* Via suggested changing to a multiple of 16, hence 1264.       */
+	/*  HT,   HA,  HBS, HBE,  HSS, HSE,  VT,  VA, VBS, VBE, VSS, VSE */
+	 {1264, 1200, 1200,  64, 1211,  32, 912, 900, 900,  12, 901, 10} }
+};
+
 /* 1280x600 (GTF) */
 struct crt_mode_table CRTM1280x600[] = {
 	/* r_rate,          vclk,              hsp,             vsp   */
@@ -937,6 +949,9 @@ struct VideoModeTable viafb_modes[] = {
 	/* Display : 1200x720 (GTF) */
 	{CRTM1200x720, ARRAY_SIZE(CRTM1200x720)},
 
+	/* Display : 1200x900 (DCON) */
+	{DCON1200x900, ARRAY_SIZE(DCON1200x900)},
+
 	/* Display : 1280x600 (GTF) */
 	{CRTM1280x600, ARRAY_SIZE(CRTM1280x600)},
 

drivers/video/via/vt1636.c

@@ -19,6 +19,8 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
 #include "global.h"
 
 u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
@@ -27,9 +29,8 @@ u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
 {
 	u8 data;
 
-	viaparinfo->shared->i2c_stuff.i2c_port = plvds_chip_info->i2c_port;
-	viafb_i2c_readbyte(plvds_chip_info->lvds_chip_slave_addr, index, &data);
-
+	viafb_i2c_readbyte(plvds_chip_info->i2c_port,
+			   plvds_chip_info->lvds_chip_slave_addr, index, &data);
 	return data;
 }
 
@@ -39,14 +40,13 @@ void viafb_gpio_i2c_write_mask_lvds(struct lvds_setting_information
 {
 	int index, data;
 
-	viaparinfo->shared->i2c_stuff.i2c_port = plvds_chip_info->i2c_port;
-
 	index = io_data.Index;
 	data = viafb_gpio_i2c_read_lvds(plvds_setting_info, plvds_chip_info,
 		index);
 	data = (data & (~io_data.Mask)) | io_data.Data;
 
-	viafb_i2c_writebyte(plvds_chip_info->lvds_chip_slave_addr, index, data);
+	viafb_i2c_writebyte(plvds_chip_info->i2c_port,
+			    plvds_chip_info->lvds_chip_slave_addr, index, data);
 }
 
 void viafb_init_lvds_vt1636(struct lvds_setting_information
@@ -159,7 +159,7 @@ void viafb_disable_lvds_vt1636(struct lvds_setting_information
 	}
 }
 
-bool viafb_lvds_identify_vt1636(void)
+bool viafb_lvds_identify_vt1636(u8 i2c_adapter)
 {
 	u8 Buffer[2];
 
@@ -170,23 +170,17 @@ bool viafb_lvds_identify_vt1636(void)
 		VT1636_LVDS_I2C_ADDR;
 
 	/* Check vendor ID first: */
-	viafb_i2c_readbyte((u8) viaparinfo->chip_info->lvds_chip_info.
-	lvds_chip_slave_addr,
-		    0x00, &Buffer[0]);
-	viafb_i2c_readbyte((u8) viaparinfo->chip_info->lvds_chip_info.
-		lvds_chip_slave_addr,
-		    0x01, &Buffer[1]);
+	if (viafb_i2c_readbyte(i2c_adapter, VT1636_LVDS_I2C_ADDR,
+					0x00, &Buffer[0]))
+		return false;
+	viafb_i2c_readbyte(i2c_adapter, VT1636_LVDS_I2C_ADDR, 0x01, &Buffer[1]);
 
 	if (!((Buffer[0] == 0x06) && (Buffer[1] == 0x11)))
 		return false;
 
 	/* Check Chip ID: */
-	viafb_i2c_readbyte((u8) viaparinfo->chip_info->lvds_chip_info.
-	lvds_chip_slave_addr,
-		    0x02, &Buffer[0]);
-	viafb_i2c_readbyte((u8) viaparinfo->chip_info->lvds_chip_info.
-		lvds_chip_slave_addr,
-		    0x03, &Buffer[1]);
+	viafb_i2c_readbyte(i2c_adapter, VT1636_LVDS_I2C_ADDR, 0x02, &Buffer[0]);
+	viafb_i2c_readbyte(i2c_adapter, VT1636_LVDS_I2C_ADDR, 0x03, &Buffer[1]);
 	if ((Buffer[0] == 0x45) && (Buffer[1] == 0x33)) {
 		viaparinfo->chip_info->lvds_chip_info.lvds_chip_name =
 			VT1636_LVDS;

drivers/video/via/vt1636.h

@@ -22,7 +22,7 @@
 #ifndef _VT1636_H_
 #define _VT1636_H_
 #include "chip.h"
-bool viafb_lvds_identify_vt1636(void);
+bool viafb_lvds_identify_vt1636(u8 i2c_adapter);
 void viafb_init_lvds_vt1636(struct lvds_setting_information
 	*plvds_setting_info, struct lvds_chip_information *plvds_chip_info);
 void viafb_enable_lvds_vt1636(struct lvds_setting_information

include/linux/via-core.h

+/*
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Jonathan Corbet <corbet@lwn.net>
+ * Copyright 2010 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __VIA_CORE_H__
+#define __VIA_CORE_H__
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+
+/*
+ * A description of each known serial I2C/GPIO port.
+ */
+enum via_port_type {
+	VIA_PORT_NONE = 0,
+	VIA_PORT_I2C,
+	VIA_PORT_GPIO,
+};
+
+enum via_port_mode {
+	VIA_MODE_OFF = 0,
+	VIA_MODE_I2C,		/* Used as I2C port */
+	VIA_MODE_GPIO,	/* Two GPIO ports */
+};
+
+enum viafb_i2c_adap {
+	VIA_PORT_26 = 0,
+	VIA_PORT_31,
+	VIA_PORT_25,
+	VIA_PORT_2C,
+	VIA_PORT_3D,
+};
+#define VIAFB_NUM_PORTS 5
+
+struct via_port_cfg {
+	enum via_port_type	type;
+	enum via_port_mode	mode;
+	u16			io_port;
+	u8			ioport_index;
+};
+
+/*
+ * This is the global viafb "device" containing stuff needed by
+ * all subdevs.
+ */
+struct viafb_dev {
+	struct pci_dev *pdev;
+	int chip_type;
+	struct via_port_cfg *port_cfg;
+	/*
+	 * Spinlock for access to device registers.  Not yet
+	 * globally used.
+	 */
+	spinlock_t reg_lock;
+	/*
+	 * The framebuffer MMIO region.  Little, if anything, touches
+	 * this memory directly, and certainly nothing outside of the
+	 * framebuffer device itself.  We *do* have to be able to allocate
+	 * chunks of this memory for other devices, though.
+	 */
+	unsigned long fbmem_start;
+	long fbmem_len;
+	void __iomem *fbmem;
+#if defined(CONFIG_FB_VIA_CAMERA) || defined(CONFIG_FB_VIA_CAMERA_MODULE)
+	long camera_fbmem_offset;
+	long camera_fbmem_size;
+#endif
+	/*
+	 * The MMIO region for device registers.
+	 */
+	unsigned long engine_start;
+	unsigned long engine_len;
+	void __iomem *engine_mmio;
+
+};
+
+/*
+ * Interrupt management.
+ */
+
+void viafb_irq_enable(u32 mask);
+void viafb_irq_disable(u32 mask);
+
+/*
+ * The global interrupt control register and its bits.
+ */
+#define VDE_INTERRUPT	0x200	/* Video interrupt flags/masks */
+#define   VDE_I_DVISENSE  0x00000001  /* DVI sense int status */
+#define   VDE_I_VBLANK    0x00000002  /* Vertical blank status */
+#define   VDE_I_MCCFI	  0x00000004  /* MCE compl. frame int status */
+#define   VDE_I_VSYNC	  0x00000008  /* VGA VSYNC int status */
+#define   VDE_I_DMA0DDONE 0x00000010  /* DMA 0 descr done */
+#define   VDE_I_DMA0TDONE 0x00000020  /* DMA 0 transfer done */
+#define   VDE_I_DMA1DDONE 0x00000040  /* DMA 1 descr done */
+#define   VDE_I_DMA1TDONE 0x00000080  /* DMA 1 transfer done */
+#define   VDE_I_C1AV      0x00000100  /* Cap Eng 1 act vid end */
+#define   VDE_I_HQV0	  0x00000200  /* First HQV engine */
+#define   VDE_I_HQV1      0x00000400  /* Second HQV engine */
+#define   VDE_I_HQV1EN	  0x00000800  /* Second HQV engine enable */
+#define   VDE_I_C0AV      0x00001000  /* Cap Eng 0 act vid end */
+#define   VDE_I_C0VBI     0x00002000  /* Cap Eng 0 VBI end */
+#define   VDE_I_C1VBI     0x00004000  /* Cap Eng 1 VBI end */
+#define   VDE_I_VSYNC2    0x00008000  /* Sec. Disp. VSYNC */
+#define   VDE_I_DVISNSEN  0x00010000  /* DVI sense enable */
+#define   VDE_I_VSYNC2EN  0x00020000  /* Sec Disp VSYNC enable */
+#define   VDE_I_MCCFIEN	  0x00040000  /* MC comp frame int mask enable */
+#define   VDE_I_VSYNCEN   0x00080000  /* VSYNC enable */
+#define   VDE_I_DMA0DDEN  0x00100000  /* DMA 0 descr done enable */
+#define   VDE_I_DMA0TDEN  0x00200000  /* DMA 0 trans done enable */
+#define   VDE_I_DMA1DDEN  0x00400000  /* DMA 1 descr done enable */
+#define   VDE_I_DMA1TDEN  0x00800000  /* DMA 1 trans done enable */
+#define   VDE_I_C1AVEN    0x01000000  /* cap 1 act vid end enable */
+#define   VDE_I_HQV0EN	  0x02000000  /* First hqv engine enable */
+#define   VDE_I_C1VBIEN	  0x04000000  /* Cap 1 VBI end enable */
+#define   VDE_I_LVDSSI    0x08000000  /* LVDS sense interrupt */
+#define   VDE_I_C0AVEN    0x10000000  /* Cap 0 act vid end enable */
+#define   VDE_I_C0VBIEN   0x20000000  /* Cap 0 VBI end enable */
+#define   VDE_I_LVDSSIEN  0x40000000  /* LVDS Sense enable */
+#define   VDE_I_ENABLE	  0x80000000  /* Global interrupt enable */
+
+/*
+ * DMA management.
+ */
+int viafb_request_dma(void);
+void viafb_release_dma(void);
+/* void viafb_dma_copy_out(unsigned int offset, dma_addr_t paddr, int len); */
+int viafb_dma_copy_out_sg(unsigned int offset, struct scatterlist *sg, int nsg);
+
+/*
+ * DMA Controller registers.
+ */
+#define VDMA_MR0	0xe00		/* Mod reg 0 */
+#define   VDMA_MR_CHAIN   0x01		/* Chaining mode */
+#define   VDMA_MR_TDIE    0x02		/* Transfer done int enable */
+#define VDMA_CSR0	0xe04		/* Control/status */
+#define	  VDMA_C_ENABLE	  0x01		  /* DMA Enable */
+#define	  VDMA_C_START	  0x02		  /* Start a transfer */
+#define	  VDMA_C_ABORT	  0x04		  /* Abort a transfer */
+#define	  VDMA_C_DONE	  0x08		  /* Transfer is done */
+#define VDMA_MARL0	0xe20		/* Mem addr low */
+#define VDMA_MARH0	0xe24		/* Mem addr high */
+#define VDMA_DAR0	0xe28		/* Device address */
+#define VDMA_DQWCR0	0xe2c		/* Count (16-byte) */
+#define VDMA_TMR0	0xe30		/* Tile mode reg */
+#define VDMA_DPRL0	0xe34		/* Not sure */
+#define	  VDMA_DPR_IN	  0x08		/* Inbound transfer to FB */
+#define VDMA_DPRH0	0xe38
+#define VDMA_PMR0	(0xe00 + 0x134) /* Pitch mode */
+
+/*
+ * Useful stuff that probably belongs somewhere global.
+ */
+#define VGA_WIDTH	640
+#define VGA_HEIGHT	480
+
+/*
+ * Indexed port operations.  Note that these are all multi-op
+ * functions; every invocation will be racy if you're not holding
+ * reg_lock.
+ */
+
+#define VIAStatus   0x3DA  /* Non-indexed port */
+#define VIACR       0x3D4
+#define VIASR       0x3C4
+#define VIAGR       0x3CE
+#define VIAAR       0x3C0
+
+static inline u8 via_read_reg(u16 port, u8 index)
+{
+	outb(index, port);
+	return inb(port + 1);
+}
+
+static inline void via_write_reg(u16 port, u8 index, u8 data)
+{
+	outb(index, port);
+	outb(data, port + 1);
+}
+
+static inline void via_write_reg_mask(u16 port, u8 index, u8 data, u8 mask)
+{
+	u8 old;
+
+	outb(index, port);
+	old = inb(port + 1);
+	outb((data & mask) | (old & ~mask), port + 1);
+}
+
+#define VIA_MISC_REG_READ	0x03CC
+#define VIA_MISC_REG_WRITE	0x03C2
+
+static inline void via_write_misc_reg_mask(u8 data, u8 mask)
+{
+	u8 old = inb(VIA_MISC_REG_READ);
+	outb((data & mask) | (old & ~mask), VIA_MISC_REG_WRITE);
+}
+
+
+#endif /* __VIA_CORE_H__ */

include/linux/via-gpio.h

+/*
+ * Support for viafb GPIO ports.
+ *
+ * Copyright 2009 Jonathan Corbet <corbet@lwn.net>
+ * Distributable under version 2 of the GNU General Public License.
+ */
+
+#ifndef __VIA_GPIO_H__
+#define __VIA_GPIO_H__
+
+extern int viafb_gpio_lookup(const char *name);
+extern int viafb_gpio_init(void);
+extern void viafb_gpio_exit(void);
+#endif

drivers/video/via/via_i2c.h → include/linux/via_i2c.h

 /*
- * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
  * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
 
  * This program is free software; you can redistribute it and/or
@@ -26,21 +26,17 @@
 
 struct via_i2c_stuff {
 	u16 i2c_port;			/* GPIO or I2C port */
+	u16 is_active;			/* Being used as I2C? */
 	struct i2c_adapter adapter;
 	struct i2c_algo_bit_data algo;
 };
 
-#define I2CPORT           0x3c4
-#define I2CPORTINDEX      0x31
-#define GPIOPORT          0x3C4
-#define GPIOPORTINDEX     0x2C
-#define I2C_BUS             1
-#define GPIO_BUS            2
-#define DELAYPORT           0x3C3
-
-int viafb_i2c_readbyte(u8 slave_addr, u8 index, u8 *pdata);
-int viafb_i2c_writebyte(u8 slave_addr, u8 index, u8 data);
-int viafb_i2c_readbytes(u8 slave_addr, u8 index, u8 *buff, int buff_len);
-int viafb_create_i2c_bus(void *par);
-void viafb_delete_i2c_buss(void *par);
+
+int viafb_i2c_readbyte(u8 adap, u8 slave_addr, u8 index, u8 *pdata);
+int viafb_i2c_writebyte(u8 adap, u8 slave_addr, u8 index, u8 data);
+int viafb_i2c_readbytes(u8 adap, u8 slave_addr, u8 index, u8 *buff, int buff_len);
+struct i2c_adapter *viafb_find_i2c_adapter(enum viafb_i2c_adap which);
+
+extern int viafb_i2c_init(void);
+extern void viafb_i2c_exit(void);
 #endif /* __VIA_I2C_H__ */