arm64: dts: qcom: sc7180: Fix node order

The SC7180 device tree nodes should be ordered by address. Re-shuffle
some nodes which currently don't follow this convention.

Since we are already moving it add a missing leading zero to the
address in the 'reg' property of the 'interrupt-controller@b220000'
node.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191212170824.v2.1.I55198466344789267ed1eb5ec555fd890c9fc6e1@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/sc7180.dtsi

@@ -642,16 +642,6 @@ uart11: serial@a94000 {
 			};
 		};
 
-		pdc: interrupt-controller@b220000 {
-			compatible = "qcom,sc7180-pdc", "qcom,pdc";
-			reg = <0 0xb220000 0 0x30000>;
-			qcom,pdc-ranges = <0 480 15>, <17 497 98>,
-					  <119 634 4>, <124 639 1>;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&intc>;
-			interrupt-controller;
-		};
-
 		tlmm: pinctrl@3500000 {
 			compatible = "qcom,sc7180-pinctrl";
 			reg = <0 0x03500000 0 0x300000>,
@@ -952,33 +942,6 @@ qspi: spi@88dc000 {
 			status = "disabled";
 		};
 
-		system-cache-controller@9200000 {
-			compatible = "qcom,sc7180-llcc";
-			reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
-			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		tsens0: thermal-sensor@c263000 {
-			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
-			reg = <0 0x0c263000 0 0x1ff>, /* TM */
-				<0 0x0c222000 0 0x1ff>; /* SROT */
-			#qcom,sensors = <15>;
-			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
-			#thermal-sensor-cells = <1>;
-		};
-
-		tsens1: thermal-sensor@c265000 {
-			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
-			reg = <0 0x0c265000 0 0x1ff>, /* TM */
-				<0 0x0c223000 0 0x1ff>; /* SROT */
-			#qcom,sensors = <10>;
-			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
-			#thermal-sensor-cells = <1>;
-		};
-
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sc7180-qusb2-phy";
 			reg = <0 0x088e3000 0 0x400>;
@@ -1028,6 +991,13 @@ usb_1_ssphy: phy@88e9200 {
 			};
 		};
 
+		system-cache-controller@9200000 {
+			compatible = "qcom,sc7180-llcc";
+			reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
+			reg-names = "llcc_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -1072,6 +1042,36 @@ usb_1_dwc3: dwc3@a600000 {
 			};
 		};
 
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sc7180-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 15>, <17 497 98>,
+					  <119 634 4>, <124 639 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+				<0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <15>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+				<0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <10>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0 0x0c440000 0 0x1100>,